Acceder

Bibliografías temáticas / Stripline fed tapered slot antenna / Artículos de revistas

Artículos de revistas sobre el tema "Stripline fed tapered slot antenna"

Siga este enlace para ver otros tipos de publicaciones sobre el tema: Stripline fed tapered slot antenna.

Autor: Grafiati

Publicado: 6 de septiembre de 2023

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Consulte los 50 mejores artículos de revistas para su investigación sobre el tema "Stripline fed tapered slot antenna".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Explore artículos de revistas sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.

1

Schaubert, D. H., J. A. Aas, M. E. Cooley y N. E. Buris. "Moment method analysis of infinite stripline-fed tapered slot antenna arrays with a ground plane". IEEE Transactions on Antennas and Propagation 42, n.º 8 (1994): 1161–66. http://dx.doi.org/10.1109/8.310008.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Nalumakkal, Priya Suresh, K. Maheshwara Reddy, K. J. Vinoy y Saurabh Shukla. "Wideband stripline fed tapered slot antenna with integral coupler for wide scan angle active phased array". IET Microwaves, Antennas & Propagation 12, n.º 9 (4 de abril de 2018): 1487–93. http://dx.doi.org/10.1049/iet-map.2017.0784.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Kim, Jung-Min, Kun-Wook Kim, Jong-Gwan Yook y Han-Kyu Park. "Compact stripline-fed meander slot antenna". Electronics Letters 37, n.º 16 (2001): 995. http://dx.doi.org/10.1049/el:20010667.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Knott, P. y A. Bell. "Coaxially-fed tapered slot antenna". Electronics Letters 37, n.º 18 (2001): 1103. http://dx.doi.org/10.1049/el:20010761.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Yao, Yuan, Wenhua Chen, Bin Huang y Zhenghe Feng. "Novel planar tapered‐slot‐fed UWB antenna". Microwave and Optical Technology Letters 50, n.º 9 (septiembre de 2008): 2280–83. http://dx.doi.org/10.1002/mop.23657.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Sangster, A. J., P. Smith, E. McErlean, K. Sinclair y R. Jacobs. "Dual-polarised stripline fed slot antenna incorporating signal cancellation". IEE Proceedings - Microwaves, Antennas and Propagation 148, n.º 6 (2001): 357. http://dx.doi.org/10.1049/ip-map:20010768.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Woo, Dong Sik, Kang Wook Kim y Hyun-Chul Choi. "A Broadband and High Gain Tapered Slot Antenna for W-Band Imaging Array Applications". International Journal of Antennas and Propagation 2014 (2014): 1–6. http://dx.doi.org/10.1155/2014/378527.

Texto completo

Resumen

A broadband and high gain tapered slot antenna (TSA) by utilizing a broadband microstrip- (MS-) to-coplanar stripline (CPS) balun has been developed for millimeter-wave imaging systems and sensors. This antenna exhibits ultrawideband performance for frequency ranges from 70 to over 110 GHz with the high antenna gain, low sidelobe levels, and narrow beamwidth. The validity of this antenna as imaging arrays is also demonstrated by analyzing mutual couplings and 4-element linear array. This antenna can be applied to mm-wave phased array, imaging array for plasma diagnostics applications.

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Meena, R. y A. R. Harish. "Parasitically Loaded Wideband CPW-Fed Tapered Slot Antenna". Journal of Electromagnetic Waves and Applications 25, n.º 17-18 (enero de 2011): 2399–408. http://dx.doi.org/10.1163/156939311798806167.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Lazaro, M. A. P. y R. Judaschke. "A 150-GHz CPW-fed tapered-slot antenna". IEEE Microwave and Wireless Components Letters 14, n.º 2 (febrero de 2004): 62–64. http://dx.doi.org/10.1109/lmwc.2003.822572.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Löcker, C., T. Vaupel y T. F. Eibert. "Radiation Efficient Unidirectional Low-Profile Slot Antenna Elements for X-Band Application". Advances in Radio Science 3 (12 de mayo de 2005): 143–46. http://dx.doi.org/10.5194/ars-3-143-2005.

Texto completo

Resumen

Abstract. Slots in metallic ground planes are very promising candidates for conformal antenna applications. However, a low-profile unidirectional antenna requires a back reflector close to the slot and the resulting stripline feed causes strong excitation of parallel-plate modes. In this contribution, we consider unidirectional reflector-backed slot configurations with parallel-plate mode suppression by shorting pins. Starting from a parametric study with respect to shorting pin location and back reflector distance, we present a stripline-fed rectangular slot element with radiation efficiency of more than 80% and a bandwidth of about 5% at centre frequency 10GHz. A careful optimisation of shorting pin locations guarantees reliable parallel-plate mode suppression without deteriorating the slot radiation behaviour. Coupling coefficients between parallel and aligned rectangular slot elements are presented. For increased bandwidth applications, a bow-tie slot element with about 8% bandwidth and radiation efficiency of close to 80% is proposed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

11

Huang, Chih-Yu y Kin-Lu Wong. "Stripline-fed printed square spiral slot antenna for circular polarisation". Electronics Letters 34, n.º 24 (1998): 2290. http://dx.doi.org/10.1049/el:19981644.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

12

Ma, T. G. y C. H. Tseng. "An Ultrawideband Coplanar Waveguide-Fed Tapered Ring Slot Antenna". IEEE Transactions on Antennas and Propagation 54, n.º 4 (abril de 2006): 1105–10. http://dx.doi.org/10.1109/tap.2006.872562.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

13

Abbosh, A. M. "Miniaturized Microstrip-Fed Tapered-Slot Antenna With Ultrawideband Performance". IEEE Antennas and Wireless Propagation Letters 8 (2009): 690–92. http://dx.doi.org/10.1109/lawp.2009.2025613.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

14

Qing, X. M. y Y. W. M. Chia. "Circularly polarised circular ring slot antenna fed by stripline hybrid coupler". Electronics Letters 35, n.º 25 (1999): 2154. http://dx.doi.org/10.1049/el:19991474.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

15

Hokmabadi, Alireza, Asghar Keshtkar, Alireza Bayat y Ahmad Keshtkar. "A CPW-fed tapered slot antenna with improved time and frequency domain characteristics". International Journal of Microwave and Wireless Technologies 9, n.º 5 (21 de noviembre de 2016): 1185–90. http://dx.doi.org/10.1017/s1759078716001288.

Texto completo

Resumen

In this paper, a miniaturized CPW-fed tapered slot antenna (TSA) with a modified CPW to slot-line transition structure was introduced. An air-bridge and tapered slot edge (TSE) structure was also employed to broaden the transition bandwidth. Through these applied modifications, negative features of the original TSA (limitation of transition) and antipodal Vivaldi antenna (bad cross-polarization) are both removed, while all the positive features remained. Results showed that the proposed structure offered a broad bandwidth of 2.6–20 GHz and also exhibited an appropriate current distribution with high radiation efficiency. The radiation pattern was stable in the working frequency band with good directivity, gain, and low cross-polarization. The proposed antenna structure also presented satisfactory time-domain characteristics. In this study, we confirmed the simulation results through data measurements.

Los estilos APA, Harvard, Vancouver, ISO, etc.

16

Liu, Jiashan, Hongda Lu, Zihao Li, Zhipeng Liu, Zhiyong Dong, Changjiang Deng, Xin Lv y Yong Liu. "Wideband Circularly Polarized Waveguide-Fed Antipodal Exponential Tapered Slot Antenna". IEEE Antennas and Wireless Propagation Letters 18, n.º 9 (septiembre de 2019): 1912–16. http://dx.doi.org/10.1109/lawp.2019.2933539.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

17

Wang, N. B., Y. C. Jiao, Y. Song, L. Zhang y F. S. Zhang. "A Microstrip-Fed Logarithmically Tapered Slot Antenna for Wideband Applications". Journal of Electromagnetic Waves and Applications 23, n.º 10 (1 de enero de 2009): 1335–44. http://dx.doi.org/10.1163/156939309789108543.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

18

Zheng, Guiping, Ahmed A. Kishk, Allen W. Glisson y Alexander B. Yakovlev. "Slot antenna fed by a CPW line with tapered transition". Microwave and Optical Technology Letters 38, n.º 6 (31 de julio de 2003): 465–67. http://dx.doi.org/10.1002/mop.11091.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

19

Santón, Pablo, Ruth De los Reyes y Juan Vicente Balbastre. "Cavity Backed Slot Antenna Fed by a Stripline with SIW Structure and Vertical Coaxial Transition for Microwave Solid-State Heating Applications". Electronics 11, n.º 3 (20 de enero de 2022): 327. http://dx.doi.org/10.3390/electronics11030327.

Texto completo

Resumen

This paper presents a new approach to feed multimode cavities used as microwave applicators for industrial and domestic microwave ovens using solid-state sources operating in the 2.45 GHz ISM (Industrial, Scientific and Medical) band (commonly used for industrial microwave applications). The feeding structure consists of a slot on the top side of the applicator cavity. The slot is fed by a shielded asymmetric stripline with a Substrate Integrated Waveguide structure (to preserve the stripline Transversal Electro-Magnetic (TEM) operation within the shield) and is N-connectorized. A first design of the antenna was obtained using state-of-the-art antenna theory assuming free-space radiation. Then, it was refined using a commercial simulation tool based on the Finite Element Method in the frequency domain to achieve VSWR values lower than 1.5 in the source bandwidth (from 2.42 to 2.48 GHz) when the antenna radiates into the applicator cavity. The design parameters of all the components making up this feeding structure are discussed throughout the paper. A prototype was built and measured in the laboratory. The experimental results are presented at the end of the paper along with the simulated ones, showing a very good agreement.

Los estilos APA, Harvard, Vancouver, ISO, etc.

20

He, Juntao, Xing Chen y Kama Huang. "A novel suspended stripline-fed printed square slot array antenna with high-gain". International Journal of RF and Microwave Computer-Aided Engineering 19, n.º 6 (16 de julio de 2009): 712–16. http://dx.doi.org/10.1002/mmce.20395.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

21

de Lera Acedo, E., E. Garcia, V. Gonzalez-Posadas, J. L. Vazquez-Roy, R. Maaskant y D. Segovia. "Study and Design of a Differentially-Fed Tapered Slot Antenna Array". IEEE Transactions on Antennas and Propagation 58, n.º 1 (enero de 2010): 68–78. http://dx.doi.org/10.1109/tap.2009.2036193.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

22

Lu, Hongda, Xin Lv, Kai Zhou y Yong Liu. "Experimental realisation of micromachined terahertz waveguide‐fed antipodal tapered slot antenna". Electronics Letters 50, n.º 8 (abril de 2014): 615–17. http://dx.doi.org/10.1049/el.2014.0327.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

23

Zhi-hong Tu, Wen-Ao Li y Qing-Xin Chu. "Single-Layer Differential CPW-Fed Notch-Band Tapered-Slot UWB Antenna". IEEE Antennas and Wireless Propagation Letters 13 (2014): 1296–99. http://dx.doi.org/10.1109/lawp.2014.2332355.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

24

Fei, Peng, Yong-Chang Jiao, Yang Ding y Fu-Shun Zhang. "A COMPACT COPLANAR WAVEGUIDE FED WIDE TAPERED SLOT ULTRA-WIDEBAND ANTENNA". Progress In Electromagnetics Research Letters 25 (2011): 77–85. http://dx.doi.org/10.2528/pierl11060208.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

25

Woo, Dong Sik, Young-Ki Cho y Kang Wook Kim. "Balance Analysis of Microstrip-to-CPS Baluns and Its Effects on Broadband Antenna Performance". International Journal of Antennas and Propagation 2013 (2013): 1–9. http://dx.doi.org/10.1155/2013/651040.

Texto completo

Resumen

Amplitude and phase balances of two types of microstrip-(MS-) to-coplanar stripline (CPS) baluns have been analyzed through simulations and measurements, and their effects on broadband antenna performance are investigated. The impedance bandwidth of the balun determined by a back-to-back configuration can sometimes overestimate the balun operating bandwidth. With the conventional balun with a 180° phase delay line, it is observed that the balun balance over the operating frequencies becomes much more improved as the CPS length increases to over 0.1 λg. As compared with the conventional balun, the proposed MS-to-CPS balun demonstrated very wideband performance from 5 to over 20 GHz. With the proposed balun, amplitude and phase imbalances are within 1 dB and ±5°, respectively. Effects of the balun imbalance on overall broadband antenna performance are also discussed with a quasi-Yagi antenna and a narrow beamwidth tapered slot antenna (TSA).

Los estilos APA, Harvard, Vancouver, ISO, etc.

26

Ta, Son Xuat, Hosung Choo y Ikmo Park. "WIDEBAND DOUBLE-DIPOLE YAGI-UDA ANTENNA FED BY A MICROSTRIP-SLOT COPLANAR STRIPLINE TRANSITION". Progress In Electromagnetics Research B 44 (2012): 71–87. http://dx.doi.org/10.2528/pierb12080605.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

27

Kim, H. y C. W. Jung. "Bandwidth enhancement of CPW fed tapered slot antenna with multi-transformation characteristics". Electronics Letters 46, n.º 15 (2010): 1050. http://dx.doi.org/10.1049/el.2010.1624.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

28

Singhal, Sarthak, Ankit Pandey y Amit Kumar Singh. "CPW-fed circular-shaped fractal antenna with three iterations for UWB applications". International Journal of Microwave and Wireless Technologies 9, n.º 2 (12 de octubre de 2015): 373–79. http://dx.doi.org/10.1017/s1759078715001506.

Texto completo

Resumen

A coplanar waveguide (CPW)-fed circular-shaped fractal antenna with third iterative orthogonal elliptical slot for ultra-wideband applications is presented. The bandwidth is enhanced by using successive iterations of radiating patch, CPW feedline, and tapered ground plane. An impedance bandwidth of 2.9–20.6 GHz is achieved. The designed antenna has omnidirectional radiation patterns along with average peak realized gain of 3.5 dB over the entire frequency range of operation. A good agreement is observed between the simulated and experimental results. This antenna structure has the advantages of miniaturized size and wide bandwidth in comparison to previously reported fractal structures.

Los estilos APA, Harvard, Vancouver, ISO, etc.

29

MA, T. G. "A Planar Tapered-Slot-Fed Annular Slot Antenna with Band-Notched Characteristics for Ultra-Wideband Radios". IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences E88-A, n.º 9 (1 de septiembre de 2005): 2384–86. http://dx.doi.org/10.1093/ietfec/e88-a.9.2384.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

30

Zhao, Hongxin, Yufu Li y Xiaoxing Yin. "Low Cross-Polarization Gaussian Tapered Post-Wall Slotline Antenna for Short Pulse Applications". International Journal of Antennas and Propagation 2017 (2017): 1–7. http://dx.doi.org/10.1155/2017/4852709.

Texto completo

Resumen

A Gaussian tapered slot antenna based on post-wall structured slotline for improvement of cross-polarization for ultra-wideband applications is proposed and experimentally demonstrated. The antenna is composed of two pairs of Gaussian tapered slotline which have the same structure printed on both sides of the PCB, two metallic via arrays positioned along the slot edges, and two terminal resistors. The metallic via arrays are used to reduce the characteristic impedance of the conventional slotline which form a post-wall slotline and thus can be fed by a coaxial connector directly. More importantly, the balanced symmetrical post-wall structure ensures low cross-polarization levels of the antenna. The Gaussian tapered edges and the terminal resistors diminish reflected signal and thus can enlarge the bandwidth significantly. Good agreements between the simulated and the measured results have been observed. Results show that the proposed antenna exhibits a −10 dB impedance bandwidth from 1.5 GHz to 20 GHz, a maximum realized gain of 12 dBi, and the broadside cross-polarization level is averaged about −32 dB in the lower frequency band and −25 dB in the higher frequency band with a maximum value of −22 dB in the whole working frequency band.

Los estilos APA, Harvard, Vancouver, ISO, etc.

31

Wu, Yanjie, Kang Ding, Bing Zhang, Jianfeng Li, Duolong Wu y Kun Wang. "Design of a Compact UWB MIMO Antenna without Decoupling Structure". International Journal of Antennas and Propagation 2018 (2018): 1–7. http://dx.doi.org/10.1155/2018/9685029.

Texto completo

Resumen

A compact high isolation ultrawideband (UWB) multiple-input-multiple-output (MIMO) antenna is designed. The proposed MIMO antenna consists of a rectangular monopole antenna and a slot antenna fed by two microstrip lines, respectively. To improve the impedance matching, a circular coupling structure is designed to feed the tapered slot antenna. The parasitic resonance introduced by the ground stub helps to extend the impedance bandwidth of monopole antenna at the upper UWB band. Commonly used complex decoupling or coupling structures are eliminated that endow the proposed antenna minimized foot print, which is preferred in mobile handset. Although without decoupling structure, high isolation is obtained between two antenna elements. Simulation and measurement verify the antenna’s desirable performance, showing a broad impedance bandwidth of 3.1–10.6 GHz with |S11| < −10 dB and |S21| < −20 dB over 3.4–10.6 GHz, and |S21| < −18 dB from 3.1–3.4 GHz.

Los estilos APA, Harvard, Vancouver, ISO, etc.

32

Lu, Hongda, Xin Lv y Yong Liu. "Radiation characteristics of terahertz waveguide‐fed circularly polarised antipodal exponentially tapered slot antenna". Electronics Letters 50, n.º 16 (julio de 2014): 1122–23. http://dx.doi.org/10.1049/el.2014.1448.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

33

Saraereh, Omar A. "A MULTIBAND AND OMNIDIRECTIONAL, CPW-FED SINGLE-LAYER BASED DUAL TAPERED-SLOT ANTENNA". Progress In Electromagnetics Research C 70 (2016): 183–91. http://dx.doi.org/10.2528/pierc16112211.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

34

Van Trinh, Thai, Son Trinh-Van, Kang-Yoon Lee, Youngoo Yang y Keum Cheol Hwang. "Design of a Low-Cost, Low-Sidelobe-Level, Differential-Fed SIW Slot Array Antenna with Zero Beam Squint". Applied Sciences 12, n.º 21 (25 de octubre de 2022): 10826. http://dx.doi.org/10.3390/app122110826.

Texto completo

Resumen

This paper presents a low-cost, low-sidelobe-level, differential-fed, substrate-integrated waveguide (SIW)-based slot array antenna with zero beam squint. The antenna consists of two identical six-way unequal power dividers (PDs) and a 6 × 16 slot array and is realized on a single-layer substrate. The six-way unequal PD provides tapered amplitude and in-phase excitation for six SIWs, and each of them has 16 radiating slots. The 1 × 16 linear slot array on each SIW is excited using a differential feed to avoid undesired beam squinting across its operating band. A two-way hybrid waveguide (WG)-to-SIW E-plane PD is developed to provide equal amplitude and out-of-phase excitation for two six-way unequal power dividers. Moreover, metallic decoupling walls are implemented between two adjacent linear slot arrays to reduce E-plane external mutual coupling. An antenna prototype is fabricated and experimentally verified. The fabricated antenna shows that the measured −10 dB reflection bandwidth is 7.15% (9.57–10.28 GHz), with the achieved gain ranging from 20.30 to 21.92 dBi. A stable boresight beam is observed over the entire operating band. Furthermore, at the designed frequency of 10 GHz, peak SLLs of −29.1 dB and −29.4 dB are achieved in the E- and H-plane, respectively.

Los estilos APA, Harvard, Vancouver, ISO, etc.

35

Patre, Situ Rani, Soni Singh y S. P. Singh. "Study of trapezoidal toothed log-periodic antenna fed through tapered microstrip line-to-coplanar stripline transition". Microwave and Optical Technology Letters 57, n.º 7 (27 de abril de 2015): 1671–77. http://dx.doi.org/10.1002/mop.29163.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

36

Trinh-Van, Son, Sung Chan Song, Seung-Hee Seo y Keum Cheol Hwang. "Waveguide Slot Array Antenna with a Hybrid-Phase Feed for Grating Lobe Reduction". International Journal of Antennas and Propagation 2016 (2016): 1–8. http://dx.doi.org/10.1155/2016/4825924.

Texto completo

Resumen

The design of a 112-element millimeter-wave waveguide slot array antenna to reduce the grating lobe level is presented. A hybrid-phase feeding technique combining a cophase feed and an alternating-phase feed is applied to facilitate the suppression of grating lobes. In addition, a stepped feed waveguide and offset coupling slots aligned in a line are employed to realize a tapered aperture distribution. As a result, grating lobe suppression of 8.1 dB was achieved on the diagonal planes compared to a conventional alternating-phase-fed waveguide slot array antenna. A prototype of the proposed antenna was fabricated and measured. The measured results show that the proposed antenna exhibits a −15 dB reflection bandwidth of 3.4%and an average realized gain of 26.72 dBi within the measured frequency range. Good agreement between the simulated and measured radiation patterns is also observed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

37

Li, Xue-Ping, Gang Xu, Chang-Jiao Duan, Ming-Rong Ma, Shui-E. Shi y Wei Li. "Compact TSA with Anti-Spiral Shape and Lumped Resistors for UWB Applications". Micromachines 12, n.º 9 (27 de agosto de 2021): 1029. http://dx.doi.org/10.3390/mi12091029.

Texto completo

Resumen

A novel compact tapered-slot-fed antenna (TSA) with anti-spiral shape and lumped resistors is presented for ultra-wideband (UWB) applications. Unique coplanar waveguide (CPW) to coplanar strip (CPS) feeding structure and exponential slot are designed to ensure the continuous current propagation and good impedance matching. With a pair of anti-spiral-shaped structure loadings at the end of the antenna, the radiation performance in lower operating band can be enhanced obviously. The typical resistor loading technique is applied to improve the time domain characteristics and expand the bandwidth. The fabricated prototype of this proposed antenna with a size of 53 × 63.5 mm2 was measured to confirm simulated results. The proposed antenna has S11 less than −10 dB in the range of 1.2–9.8 GHz, and the group delay result is only 0.4 ns. These findings indicate the proposed antenna can be taken as a promising candidate in UWB communication field.

Los estilos APA, Harvard, Vancouver, ISO, etc.

38

Lin, Fenghan, Yihong Qi y Yong-Chang Jiao. "A 0.7–20-GHz Strip-Fed Bilateral Tapered Slot Antenna With Low Cross Polarization". IEEE Antennas and Wireless Propagation Letters 12 (2013): 737–40. http://dx.doi.org/10.1109/lawp.2013.2270934.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

39

Lin, F., Y. ‐C Jiao y Z. Zhang. "Strip‐fed tapered slot antenna with enhanced impedance bandwidth from 0.57 to 35 GHz". Electronics Letters 49, n.º 17 (agosto de 2013): 1057–58. http://dx.doi.org/10.1049/el.2013.1920.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

40

Ma, Han-Qing y Tao Feng. "Antipodal linearly tapered slot antenna with reduced mutual coupling fed by substrate integrated waveguide". Microwave and Optical Technology Letters 53, n.º 11 (19 de agosto de 2011): 2512–15. http://dx.doi.org/10.1002/mop.26368.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

41

Kumar, Sachin, Gwan Hui Lee, Dong Hwi Kim, Nashuha Syifa Haunan, Hyun Chul Choi y Kang Wook Kim. "Compact Planar Super-Wideband Monopole Antenna with Four Notched Bands". Electronics 9, n.º 8 (27 de julio de 2020): 1204. http://dx.doi.org/10.3390/electronics9081204.

Texto completo

Resumen

A compact-sized planar super-wideband (SWB) monopole antenna with four notched bands is presented in this paper. The antenna consists of a rectangular ground plane and a circular radiator that is fed by a tapered microstrip feed line. The overall size of the antenna is 18 mm × 12 mm × 0.5 mm, and its impedance bandwidth (S11 ≤ −10 dB) ranges from 2.5 GHz to 40 GHz (bandwidth ratio of 16:1). Four notched bands are obtained using two inverted U-shaped slots, a split-ring resonator (SRR), and a meandered slot. The notched frequency bands can be adjustable by changing the parameters of parasitic slot elements, and the realized notched bands in this paper are Wi-MAX band (3.5 GHz), WLAN band (5.5 GHz), satellite communication X-band (7.5 GHz), and amateur radio band (10.5 GHz). The simulated and experimental results show good agreement with each other. The antenna possesses a high gain, super-wide impedance bandwidth, and omni-directional radiation patterns.

Los estilos APA, Harvard, Vancouver, ISO, etc.

42

Shuai, Chen-Yang, Guang-Ming Wang y Ya-Wei Wang. "A novel uniplanar wideband magneto-electric dipole antenna element". International Journal of Microwave and Wireless Technologies 9, n.º 10 (8 de agosto de 2017): 1983–89. http://dx.doi.org/10.1017/s1759078717000861.

Texto completo

Resumen

A novel uniplanar wideband magneto-electric dipole antenna element is proposed in this paper. The proposed antenna is composed of the conventional bow-tie radiation patch as an electric dipole, a semi-circular loop, which works as a magnetic dipole, a coplanar ground plane, two directors with different lengths for enhancing gain, and a microstrip-to-coplanar stripline transition balun. The designed antenna adopts a small-size coplanar ground plane to achieve a uniplanar structure. Consequently, this method reduces the space size immensely and makes the antenna suitable for the array application. In addition, a tapered slot structure is utilized to improve impedance matching. The prototype of the proposed antenna was fabricated and measured. The measured results keep in good accordance with the simulated ones. The simulated results show that the proposed antenna obtains a broad impedance bandwidth of 60.5% from 2.25 to 4.20 GHz (voltage standing wave ratio [VSWR] ≤ 2) which can be applied for wireless local area network (WLAN) (2.4–2.484 GHz), worldwide interoperability for microwave access (WiMAX) (2.5–2.69/3.4–3.69 GHz), and long term evolution (LTE) (2.5–2.69 GHz). Meanwhile, the stable gain, low cross-polarization, stable unidirectional radiation patterns, and low back lobe are obtained within the operating frequency band. The array composed of the proposed antenna elements is also investigated in this paper.

Los estilos APA, Harvard, Vancouver, ISO, etc.

43

Zhang, Yingsong, Wei Hong y Zhenqi Kuai. "A SIW Fed Antipodal Linear Tapered Slot Planar Multi-Beam Antenna for Millimeter-Wave Application". Journal of electromagnetic engineering and science 10, n.º 3 (30 de septiembre de 2010): 175–78. http://dx.doi.org/10.5515/jkiees.2010.10.3.175.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

44

Wu, Chen. "A K-band suspended microstripline-fed linear tapered slot antenna and its E-plane arrays". Microwave and Optical Technology Letters 41, n.º 6 (2004): 451–55. http://dx.doi.org/10.1002/mop.20168.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

45

Li, P., J. Liang y X. Chen. "Ultra-wideband elliptical slot antenna fed by tapered microstrip line with U-shaped tuning stub". Microwave and Optical Technology Letters 47, n.º 2 (2005): 140–43. http://dx.doi.org/10.1002/mop.21104.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

46

Remez, J., E. Zeierman y R. Zohar. "Dual-Polarized Tapered Slot-Line Antenna Array Fed by Rotman Lens Air-Filled Ridge-Port Design". IEEE Antennas and Wireless Propagation Letters 8 (2009): 847–51. http://dx.doi.org/10.1109/lawp.2009.2025063.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

47

Liu, Xiaochun, Li Wang, Mingxi Zhang, Shaobin Liu y Guiqiang Du. "A Dual-Polarized Printed Antenna Based on a Tapered Slot SICL Balun for Airborne Radar Application". International Journal of Antennas and Propagation 2020 (14 de marzo de 2020): 1–13. http://dx.doi.org/10.1155/2020/7148969.

Texto completo

Resumen

The substrate-integrated coaxial line (SICL) is a potential transmission line due to its good characteristics of high efficiency, nondispersive, and single operational mode. A tapered slot SICL balun is proposed, which can realize the impedance transformation from the microstrip line to the coplanar strip line (CPS). At the same time, the proposed balun can transform the quasi-TEM mode of the microstrip line to the TEM mode of CPS. A printed dipole radiator is designed and is fed by the proposed SICL balun to achieve the impedance matching. The dual-polarized radiation mode is realized by employing two orthogonal printed dipoles. For each polarization radiator, the CPS is bended to avoided the occlusion of two polarization ports and realize the direct assembling of two orthogonal printed circuits. What is more, the assembling method is advantageous to improve the port isolation degree and decrease the cross polarization level. To improve the ratio of front to back (F/B) of the radiation pattern, a cylindrical metal cavity is adopted. According to the results of simulation and experiments, the VSWR of each port is lower than 2, the isolation degree between two polarization ports is higher than 20 dB, and the cross polarization level at the boresight is lower than −20 dB at the operational frequency. The patterns of two ports are almost symmetric, and high radiation efficiency is obtained. The experimental results of the principle prototype verify the design schemes of the balun and the dual-polarized antenna. The proposed dual-polarized antenna fed by the tapered slot SICL balun is suitable for the airborne radar application.

Los estilos APA, Harvard, Vancouver, ISO, etc.

48

Khan, Imran, Hongbing Qiu, Saeed Ur Rahman y Habib Ullah. "Compact Single Band Suppression Monopole Antenna for SWB Application". International Journal of Advanced Networking and Applications 14, n.º 05 (2023): 5645–50. http://dx.doi.org/10.35444/ijana.2023.14509.

Texto completo

Resumen

This article describes the design of a miniatured monopole antenna with a band notch for use in super-wideband applications. The suggested antenna is fed by a triangular tapered micro-strip feed line and has a frequency range of 2.88 to 60 GHz (bandwidth ratio: 20.83:1) with |S11|<−10 dB, with the exception of the notched band for WLAN band at 4.35–6.45 GHz. The antenna’s overall dimensions are 23 × 14.5 × 1 mm3 which consists of F4B substrate having permittivity of 2.65 and 1mm thickness, a round-cornered beveled-shaped radiating element, and a roundcornered partial ground plane. To realize the band notch characteristic an inverted crescent shape slot is introduced in the radiator. This paper presents the simulated results for the suggested antenna. The results shows that the suggested antenna operates well over the whole operational BW (181.7%), making it a good choice for SWB applications.

Los estilos APA, Harvard, Vancouver, ISO, etc.

49

Zhang, Xiaobo, Saeed Ur Rahman, Qunsheng Cao, Ignacio Gil y Muhammad Irshad khan. "A Novel SWB Antenna with Triple Band-Notches Based on Elliptical Slot and Rectangular Split Ring Resonators". Electronics 8, n.º 2 (10 de febrero de 2019): 202. http://dx.doi.org/10.3390/electronics8020202.

Texto completo

Resumen

In this paper, a wideband antenna was designed for super-wideband (SWB) applications. The proposed antenna was fed with a rectangular tapered microstrip feed line, which operated over a SWB frequency range (1.42 GHz to 50 GHz). The antenna was implemented at a compact size with electrical dimensions of 0.16 λ × 0.27 λ × 0.0047 λ mm3, where λ was with respect to the lowest resonance frequency. The proposed antenna prototype was fabricated on a F4B substrate, which had a permittivity of 2.65 and 1 mm thickness. The SWB antenna exhibited an impedance bandwidth of 189% and a bandwidth ratio of 35.2:1. Additionally, the proposed antenna design exhibited three band notch characteristics that were necessary to eradicate interference from WLAN, WiMAX, and X bands in the SWB range. One notch was achieved by etching an elliptical split ring resonator (ESRR) in the radiator and the other two notches were achieved by placing rectangular split ring resonators close to the signal line. The first notch was tuned by incorporating a varactor diode into the ESRR. The prototype was experimentally validated with, with notch and without notch characteristics for SWB applications. The experimental results showed good agreement with simulated results.

Los estilos APA, Harvard, Vancouver, ISO, etc.

50

Malekpoor, H. "Broadband Printed Tapered Slot Antenna Fed by CPW Fulfilled with Planar Artificial Magnetic Conductor for X-Band Operation". Advanced Electromagnetics 12, n.º 1 (24 de enero de 2023): 1–10. http://dx.doi.org/10.7716/aem.v12i1.2087.

Texto completo

Resumen

A low-profile printed slot antenna (PSA) backed by broadband planar artificial magnetic conductor (AMC) is introduced in this study. Firstly, a suggested PSA with the radiating tapered slots excited by coplanar-waveguide (CPW) is used to expand the bandwidth in the measured range of 9-11 GHz (S11≤ -10 dB). Then, the suggested planar AMC surface as the ground plane of the antenna is inserted into the PSA to gain improved radiation efficiency. The realized result from the PSA with the 9×9 planar AMC array exhibits -10 dB measured impedance bandwidth from 6.63 to 13.73 GHz (70%). The suggested PSA with AMC compared to the PSA without AMC exhibits a size reduction of 60%, enhanced bandwidth of 50%, and excellent impedance matching with a minimum value of almost -40 dB. The novel AMC unit cell is realized to operate at 10.14 GHz with an AMC bandwidth of 8-12.35 GHz (43.1%) for X-band operation. Besides, by loading a periodic AMC unit cells into PSA, a high gain of more than 11 dBi with uni-directional radiation patterns is achieved.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!