Siga este enlace para ver otros tipos de publicaciones sobre el tema: Storm sewers.
Tesis sobre el tema "Storm sewers"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte los 50 mejores tesis para su investigación sobre el tema "Storm sewers".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Explore tesis sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.
1
Kuhail, Z. S. A. "Sediment transport in storm sewers." Thesis, University of Salford, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234631.
Texto completo
2
Mat, Suki R. B. "Sediment transport in storm sewers." Thesis, University of Salford, 1987. http://usir.salford.ac.uk/43025/.
Texto completoResumen
Literature survey made in this research indicated that the roughness has a significant effect on the design of a self-cleansing sewer. A conceptual model was therefore developed taking into account the effect of roughness in the sediment transport in sewers. This model was later tested against experimental data obtained from a test rig. The rig had a pipe which was specially fabricated in two halves so that it could be divided to coat the interior with uniform sand grains to provide roughness. The experimental data shows a good correlation with the model developed. Two relationships i.e. for smooth and rough pipes, were derived from the results. The effects of volumetric sediment concentration, pipe diameter, sediment size and effective roughness on these relationships were in turn examined. Head loss formulae acquired by past researchers were slightly modified to suit the range covered by the experimental data. The relationships developed in this research were subsequently applied to sewer design. These were later compared to the criterion of 0.76 m/s proposed by the British Standards. In the case of smooth pipes, it shows conclusively that the criterion of 0.76 m/s produces excessive slopes for pipe diameter up to 1.0 metre. However, for rough pipes the criterion gives insufficient slopes to maintain a self-cleansing sewer. This is valid up to a pipe diameter of 0.3 metre. Beyond this diameter the criterion gives high slopes. Comparisons were also made with studies in the wider field of sediment transport on fixed bed. These have set in context the proposed formulae for smooth and rough pipes in the design of storm sewers.
3
McCutcheon, Matthew D. "Modeling Exfiltrating Storm Sewers Using SWMM." University of Cincinnati / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1282569476.
Texto completo
4
Susai, Manickam Sheeba Rose Mary. "Dimensionless Design Charts for Exfiltration in Storm Sewers." University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1342544885.
Texto completo
5
Elgendy, Mohamed Moustafa M. A. "Condition assessment and data integration for GIS-based storm water drainage infrastructure management systems." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2008. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.
Texto completo
6
Wong, Ka-chung Colin. "Hydraulics of bottom rack chamber for supercritical flow diversion." Click to view the E-thesis via HKUTO, 2009. http://sunzi.lib.hku.hk/hkuto/record/B42664469.
Texto completo
7
Kavanaugh, Michael David Kennedy James. "Influence of stormwater drainage facilities on mosquito communities within the city of Denton, Texas." [Denton, Tex.] : University of North Texas, 2008. http://digital.library.unt.edu/permalink/meta-dc-9765.
Texto completo
8
Watkins, Edwin W. "Extended stormwater detention basin design for pollutant removal." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-08042009-040522/.
Texto completo
9
Ng, Warren Heng Wan. "Identification, transport and treatment of adhered deleterious substances of stormwater in an urban catchment thesis submitted in fulfilment of the degree of Doctor of Philosophy, Earth & Oceanic Sciences Research Institute, Auckland University of Technology, August 2004 /." Full thesis. Abstract, 2004. http://puka2.aut.ac.nz/ait/theses/NgW.pdf.
Texto completo
10
Ota, Jose Junji. "Effect of particle size and gradation on sediment transport in storm sewers." Thesis, University of Newcastle upon Tyne, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299669.
Texto completo
11
Bowers, Bryan E. "Development and analysis of computer aided design and drafting software for storm sewers." Thesis, Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/80328.
Texto completoResumen
A software package has been developed for the IBM personal computer that aids engineers in storm sewer design and drafting.
The most unique feature of this software package is its extensive use of the AutoCAD graphics system. The software package uses AutoCAD to enter storm sewer data. Drainage areas, sewer line locations, type of structures, and all other hydrologic parameters can be entered. The software also creates plan and profile drawings of the storm sewer system through AutoCAD. There are other unique features. The software can calculate the hydraulic grade line for the system. If the user enters street centerlines and widths, the program can automatically calculate the exact coordinates for drainage inlet structures located on streets. If contour lines are entered, the program will determine the surface profile above the sewer lines, calculate the approximate elevations of the structures, and check for minimum ground cover when designing the storm sewer system.
Data can be entered two ways in AutoCAD. The first way is to simply enter the numeric values for the parameters. The second way is to enter the raw data and let the program calculate the parameters. An example of this would be, entering a drainage area polygon and letting the program calculate the drainage area, weighted runoff coefficient and the time of concentration.
This software allows the engineer to design and later make changes in the configuration of a storm sewer system quickly and easily.<br>Master of Science
12
Wong, Ka-chung Colin, and 黃家聰. "Hydraulics of bottom rack chamber for supercritical flow diversion." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B42664469.
Texto completo
13
Cave, Kelly A. "Evaluation of the effectiveness of BMP's for urban stormwater management: single-event simulation." Thesis, Virginia Polytechnic Institute and State University, 1986. http://hdl.handle.net/10919/101316.
Texto completoResumen
A desk top model has been developed for "user-friendly" application in personal computers to simulate watershed response to a rainfall event in terms of runoff generation and to estimate nonpoint source pollutant loadings associated with the storm event. The algorithms utilize the SCS TR - 55 method for calculating runoff hydrographs for a single storm event. A methodology has been adapted to generate pollutographs which combines the SCS Type II rainfall distribution with the standard pollutant washoff equations. In addition, this model allows for the design, evaluation, and cost effectiveness analysis of various best management practice (BMP) measures as tools to manage stormwater quantity and quality.<br>M.S.
14
Peng, Yang Amy, and 彭阳. "Living with water: decentralized storm water management in urban village." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2013. http://hub.hku.hk/bib/B50707048.
Texto completo
15
Whant, Louis Mathew. "Stormwater impacts on disharge water quality in licensed drains at the Port Kembla Steelworks." Access electronically, 2005. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20060712.144710/index.html.
Texto completo
16
Krpo, Ana. "GIS model for assessment of land use and urban development effects on stormwater runoff Puhinui Catchment case study : thesis submitted in fulfilment of the degree of Master of Applied Science, Auckland University of Technology, February 2004." Full thesis. Abstract, 2004. http://puka2.aut.ac.nz/ait/theses/KrpoA.pdf.
Texto completo
17
Habets, Maurice. "Stormwaterbesoedeling in die Lourensrivier-opvanggebied." Thesis, Cape Technikon, 1993. http://hdl.handle.net/20.500.11838/1024.
Texto completoResumen
Thesis (Master Diploma (Civil engineering)--Cape Technikon, Cape Town,1993<br>Stormwater pollution is a major problem in many of the areas where it is present.
Due to the changing nature in terms of quality and quantity of stormwater, which has its
origin in many different places, it is difficult to control and identify the source of
pollution.
Some of the pollutants present in stormwater run-off include oxygen-demanding
substances, suspended solids, trace metals, toxic organic compounds (eg. chlorinated
hydrocarbons), nutrients, refuse, plastics and pathogenic bacteria and viruses.
This thesis identifies and discusses the problems in the Lourensriver catchment area, and
produce practical solutions to decrease the pollution.
The report consists of four sections.
Part I :
Part 2 :
Part 3 :
Part 4 :
Evaluation of the existing area and identification of the problem.
Literamre study.
Control of Stormwater ie. storing, treatment and disposal.
Presencation of steps to be followed to rectify the problem.
If the findings and recommendations are followed, it should make
a positive contribution to the wellbeing of the catchment area. The findings of this report
could also be applied to areas with similar problems.
The following recommendations are made for the Lourens River:
" Monitor and strict implementation of the Wateract (1936).
" In the Lower zone, pollution can be diluted and flushed out by ways of the
closure of Melkschloot.
" Design of any new development must take place in such a manner so as the
stormwater discharge after development will be of the same quality and quantity
as before construction.
" Creation of permeable surfaces in established areas.
" Delay of rainwater flow out of all areas.
" Construction of additional sedimentation and detention dams for the storing and
treatment of stormWater.
" Awareness programmes to inform the public and industry.
" Implementation of preventative measurements.
" Establishment of controlling body's to ensure co-ordination betvieen various
institutions and local government.
" Monitor of run-off from industrial and agricultural terrain and identifying of
unlawful practices.
Strict anti-littering and dumping actions.
Placing of waste storage bins in residential and industrial areas.
Permits for the usage of poisons and the monitor there off.
Encouragement of cleaning up actions and groups.
Encouragement and increase of street cleaning operations.
Construction of effective catchment basins to remove sol ids before it ends up in
the stormwater pipes.
Regular cleaning of catchment basins.
Regular flushing of stormwater pipes.
Construction of marshlands.
Construction of reedbeds.
18
Segarra, Rafael Ivan. "A statistical approach to urban stormwater detention planning." Diss., Virginia Polytechnic Institute and State University, 1988. http://hdl.handle.net/10919/81046.
Texto completoResumen
A statistical model has been developed to study the long-term behaviour of a stormwater detention unit. This unit stores a portion of the incoming runoff, corresponding to the empty space available in the unit, from which runoff is pumped to a treatment plant. The objective is to avoid, as much as possible, the discharge of untreated runoff to receiving bodies of water.
The model was developed by considering the arrival of independent runoff events at the urban catchment. The process variables of event depth, duration, and interevent time were treated as independent, identically distributed random variables. A storage equation was formulated from which the probability of detention unit overflow was obtained. With this distribution it was possible to define the trap efficiency of the unit in terms of the long-term fraction of the runoff volume trapped by the storage unit.
The trap efficiency expressions define storage/ treatment isoquants, which represent the combinations of storage capacity, treatment rate, and the sewer system runoff trapping capacity, which provide a fixed level of runoff control.
A pollutant load model was also formulated, based on a first-order washoff model. This model was used to define pollutant control isoquants.
Optimal values of the required storage capacity and treatment rate were obtained by treating the isoquants as production functions. Applying the results of production function theory, a cost minimization problem was solved for the value of the storage capacity and treatment rate, for prescribed runoff and pollutant trap efficiency levels.
The results obtained with the statistical model compared well with results obtained from major simulation models.
The statistical approach offers an advantage in that no simulation is required to obtain the isoquants, as the expressions are analytical, thus greatly simplifying the optimization process. Also, the evaluation of the storage unit pollutant trap efficiency can be easily evaluated for any type of pollutant whose washoff rate is known.<br>Ph. D.
19
Stovold, Matthew R. "Modeling urban stormwater disposal systems for their future management and design /." Connect to this title, 2006. http://theses.library.uwa.edu.au/adt-WU2007.0111.
Texto completo
20
Wilson, Laura R. "Evaluation of a Constructed Dry Swale for Treatment of Stormwater Runoff." Fogler Library, University of Maine, 2004. http://www.library.umaine.edu/theses/pdf/WilsonLR2004.pdf.
Texto completo
21
Boe, Jennifer Barber. "Removal of hydrocarbons from urban stormwater runoff by gravity separation." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-10312009-020227/.
Texto completo
22
Kobryń, Halina T. "Land use changes and the properties of stormwater entering a wetland on a sandy coastal plain in Western Australia /." Access via Murdoch University Digital Thesis Project, 2001. http://wwwlib.murdoch.edu.au/adt/browse/view/adt-MU20040519.165016.
Texto completo
23
Khwanboonbumpen, S. "Sources of nitrogen and phosphorus in stormwater drainage from established residential areas and options for improved management." Connect to thesis, 2006. http://portal.ecu.edu.au/adt-public/adt-ECU2008.0004.html.
Texto completo
24
Grobler, Pieter. "Verification of the inlet capacities of modified stormwater kerb inlets and the development of new design curves." Thesis, Stellenbosch : Stellenbosch University, 1994. http://hdl.handle.net/10019.1/58627.
Texto completoResumen
Thesis (MEng)--Stellenbosch University, 1994.<br>ENGLISH ABSTRACT: Various aspects affecting the inlet capacities of modified stormwater kerb inlets were
investigated. Investigations centred on the influence of effective inlet length, ratios of
upstream transition section length to inlet section length and road crossfall. The
suitability of existing design curves for use in the design of modified kerb inlets was
verified and new more "user-friendly" design curves were developed. Attempts were
made to develop a sound theoretical model to predict inlet capacities for stormwater
kerb inlets as the lack of such a model had previously been identified as a major
shortcoming in the design of stormwater kerb inlets.
A detailed study of relevant literature and of various full scale model test results
confirmed the fact that the effective inlet length is the most important variable
affecting the inlet capacity at stormwater kerb inlets. Model studies on various
combinations of transition section lengths and inlet section lengths have indicated that
in the case of supercritical flow the inlet capacity of stormwater kerb inlets is not
sensitive to changes in the ratio between the inlet section length and the upstream
transition section length. Furthermore no marked effect on the inlet capacity of a
modified stormwater kerb inlet was detected when the road crossfall was increased
from 2% to 3%. The inlet capacities predicted by the existing design curves were
found to be consistent, although on the conservative side, when compared to the inlet
capacities obtained from the full scale model tests. New design curves derived from
the existing design curves were developed to provide a less cumbersome procedure in
the design of stormwater kerb inlets. The development of an improved comprehensive
theoretical model based on pure hydraulic principles was not possible due to the
extremely complex nature of flow conditions at stormwater kerb inlets. The most important findings emanating from this research project are: - The confirmation of the "effective inlet length” concept, whereby a part of the expensive inlet section is replaced by an equivalent length of inexpensive transition section upstream of the kerb inlet. which does not affect the inlet capacity of the kerb inlet negatively and thereby results in a substantial saving
in the cost of stormwater kerb inlets. - Model tests revealed that for supercritical flows the upstream transition section
can be made up to 6 times longer than the inlet section with a maximum length
of 6m. without any negative effect on the inlet capacity of the kerb inlet.
Similarly an analysis of previous research results has indicated that even in
cases of subcritical flow the upstream transition section can be made twice the
length of the inlet section. - The full scale model tests also indicated that an upward adjustment of 30% in
the inlet capacities as predicted by the existing design curves was justified. The
modified design curves proved to be suitable for the design of conventional
stormwater kerb inlets as well as for modified stormwater kerb inlets where
part of the inlet section is replaced by a transition section. A new set of "easy
to use" design curves was developed specifically for urban applications. - Guidelines for determining upstream transition section lengths were drawn up
for use in conjunction with the existing and new design curves for the design
of stormwater kerb inlets.<br>AFRIKAANSE OPSOMMING: Verskeie aspekte wat die inlaatkapasiteit van verbeterde randsteeninlate belnvloed is
ondersook. Die belangrikste aspekte wat ondersoek is, was die invlood van effektiewe
inlaatlengte en die moontlike verhouding van die stroomop oorgangslengte tot die
werklike inlaatlengte sowel as dwarshelling. Die ontwerpgrafieke wat tans gebruik
word om randsteeninlaatlengtes te bepaal is ook ondersoek aan die hand van
modeltoetse op volskaalse modelle om die grafieke se akkuraatheid te toots. Meer
gebruikersvriendelike ontwerpgrafieke is ook ontwikkel. 'n Belangrike tekortkoming
tot op datum, naamlik 'n geskikte teoretiese model om die inlaatkapasiteit van
randsteeninlate te beskryf, is aangespreek. 'n Voorvereiste vir so 'n model was dat die
model gebaseer moes word op suiwer hidrouliese beginsels.
Die bestudering van vorige navorsing asook die uitvoering van verskeie modelstudies
op volskaalse randsteeninlate het die effektiewe inlaatlengte as die belangrikste
veranderlike wat die inlaatkapasiteit van randsteeninlate bepaal geYdentifiseer. Tydens
tootse uitgevoer op volskaalse modelle onder superkritiese vlooitoostande met
verskillende kombinasies van oorgangslengtes en inlaatlengtes, vir die dieselfde totale
lengte het dit geblyk dat die inlaatkapasiteit grootliks onatbanklik is van die
verhouding van die oorgangslengte tot die inlaatlengte. Vit die modeltootse het dit oak
geblyk dat paddwarsval 'n baie beperkte invlood op die inlaatkapasiteit van
ransteeninlate gehad het toe die paddwarsval verander is van 2%na 3%. Die resultate
wat verkry is uit die modeltoetse het ook aangetoon dat die bestaande ontwerpgrafieke
konserwatief is in hul voorspelling van inlaatkapasieit van randsteeninlate. Die
bestaande ontwerpgrafieke is voorts gebruik om nuwe meer gebruikersvriendelike
ontwerpgrafieke te ontwikkel. Die ontwikkeling van 'n teoretiese model am
inlaatkapasiteite volledig te voorspel was egter nie moontlik nie vanwee die uiters
komplekse aard van die vloei by randsteeninlate.
Die belangrikste bevindinge van hierdie studie kan soos volg opgesom word: - Afdoende bewyse is gevind dat die "effektiewe inlaatlengte" konsep,
waarvolgens 'n gedeelte van die duur inlaatgedeelte met 'n goedkoper
oorgangsstuk van dieselfde Iengte vervang kan word sonder om inlaatkapasiteit
in te boet, weI suksesvol aangewend kan word om kostes in die ontwerp van
stOlIDwater randsteeninlate te bespaar. - Afdoende bewyse is gevind dat die "effektiewe inlaatlengte" konsep,
waarvolgens 'n gedeelte van die duur inlaatgedeelte met 'n goedkoper
oorgangsstuk van dieselfde Iengte vervang kan word sonder om inlaatkapasiteit
in te boet, weI suksesvol aangewend kan word om kostes in die ontwerp van
stOlIDwater randsteeninlate te bespaar. - Afdoende bewyse is gevind dat die "effektiewe inlaatlengte" konsep,
waarvolgens 'n gedeelte van die duur inlaatgedeelte met 'n goedkoper
oorgangsstuk van dieselfde Iengte vervang kan word sonder om inlaatkapasiteit
in te boet, weI suksesvol aangewend kan word om kostes in die ontwerp van
stOlIDwater randsteeninlate te bespaar. - Riglyne is ook ontwikkel vir die bepaling van stroomop oorgangslengtes. Die
riglyne kan saam met die bestaande en die nuwe ontwerpgrafieke gebruik word
by die ontwerp van stormwater nmdsteeninlate.
25
Kavanaugh, Michael David. "Influence of stormwater drainage facilities on mosquito communities within the city of Denton, Texas." Thesis, University of North Texas, 2008. https://digital.library.unt.edu/ark:/67531/metadc9765/.
Texto completoResumen
Weekly collections were conducted from May to December, 2007 (153 trap nights, total) in Denton, Texas, in and around large storm drains and overpass drainage facilities in residential and non-residential areas, using Centers for Disease Control (CDC) light traps and gravid traps. A total of 1964 mosquitoes were collected, representing 24 species within 6 genera: Aedes, Anopheles, Culiseta, Culex, Psorophora, and Uranotaenia. Culex was the most abundant genus, representing 75% of all mosquitoes collected; Aedes was the second most abundant, representing 12 % of all mosquitoes collected. Cx. quinquefasciatus was the dominant species collected via gravid traps; Cx. (Melanoconion) species were the dominant species collected via CDC light traps. Data of gravid traps and light traps were analyzed separately using nonparametric correlation analysis, comparing environmental data and physical characteristics to total abundance of mosquitoes. There was no significant correlation found when comparing the three dominant species collected in light traps (unidentified Cx. (Melanoconion) sp, Cx. quinquefasciatus, and Ae. vexans) to environmental characteristics and physical characteristics. Analysis of Cx. quinquefasciatus collected in gravid traps indicated no significant correlation between abundance, environmental data, and physical characteristics. Linear regression models were analyzed to determine if either environmental variables or physical characteristics of the drainage system explained the species abundance collected; no individual variable showed an association of significance. Analysis of Cx. quinquefasciatus collected in storm drains via gravid traps determined temperature to be the most important variable in determining population abundance and explained 99% of the population variability.
26
Camacho, Gema Liliana. "GIS-based tool for assessing hydraulic performance of drainage infrastructure system in El Paso." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2009. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.
Texto completo
27
Nodine, Dewayne J. "Spatial decision support system for evaluation of land use plans based upon storm water runoff impacts : a theoretical framework." Virtual Press, 1996. http://liblink.bsu.edu/uhtbin/catkey/1020175.
Texto completoResumen
All land uses affect storm water runoff However, different uses of the same site generate varying amounts of runoff Many communities have come to rely upon detention and/or retention basins for controlling the additional runoff resulting from land development. It is argued that this incremental approach to storm water management must be replaced with a more proactive long-term view.To achieve this, more user-friendly software capable of modeling the effect long-range land use plans have on the volume and behavior of storm water runoff is needed. This software, called a Spatial Decision Support System (SDSS), must be capable of guiding the user, who may not be an expert at runoff analysis, through the process and also capable of generating output in various formats understandable by lay persons. This study utilizes a systems analysis technique to develop a theoretical framework for the Storm Water SDSS.<br>Department of Urban Planning
28
Papu, Lumka. "Public health impacts of storm water canals in Nelson Mandela Bay communities." Thesis, Nelson Mandela Metropolitan University, 2015. http://hdl.handle.net/10948/3021.
Texto completo
29
Vo, Le Phu. "Urban stormwater management in Vietnam." Title page, table of contents and abstract only, 2000. http://web4.library.adelaide.edu.au/theses/09ENV/09envl595.pdf.
Texto completo
30
Pereira, Silvano Porto. "Modelagem da Qualidade BacteriolÃgica das Ãguas Consteiras de Fortaleza (Nordeste do Brasil)." Universidade Federal do CearÃ, 2012. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=9035.
Texto completoResumen
nÃo hÃ<br>A modelagem ambiental à uma importante ferramenta para projetos e estudos envolvendo a gestÃo ambiental, devido à complexidade dos sistemas ambientais. Com ela à possÃvel integrar um grande nÃmero de variÃveis e processos de forma a obter uma visÃo dinÃmica de tais sistemas e avaliar as suas condiÃÃes presentes e futuras. Neste trabalho sÃo apresentados os resultados de modelagens da qualidade bacteriolÃgica da Ãgua da Ãrea costeira de Fortaleza (Brasil), frente a diversas entradas de cargas contaminantes nas mesmas. Coliformes termotolerantes, usados como indicadores de qualidade de Ãguas de banho pelas normas brasileiras, foram numericamente modelados usando o SisBaHiA (Sistema Base de HidrodinÃmica Ambiental), usando-se cargas contaminantes provenientes de trÃs diferentes tipos de fontes: rios, galerias pluviais e emissÃrio submarino. Os modelos foram implementados de forma a representar as variaÃÃes de decaimento frente à radiaÃÃo solar e outros fatores ambientais. Foram obtidos valores relativamente prÃximos entre os resultados modelados e monitorados em campo em diferentes cenÃrios. Os resultados mostraram que as galerias pluviais sÃo as fontes de contaminaÃÃo mais importantes, respondendo por episÃdios de nÃo cumprimento dos padrÃes de qualidade de Ãgua de banho, especialmente durante os perÃodos chuvosos. AlÃm disto, os resultados mostraram nÃo haver riscos da pluma do emissÃrio submarino de Fortaleza alcanÃar as Ãreas de banho das praias da cidade.<br>The environmental modeling is an important tool for studies and projects involving environmental management, due to the complexity of environmental systems. With it you can integrate a large number of variables and processes in order to obtain a dynamic view of such systems and assess their present and future conditions. This paper presents the results of modeling the bacteriological quality of the water in the coastal area of ​​Fortaleza (Brazil), and against several entries contaminant loads in them. Fecal coliform, used as indicators of quality of bathing waters by Brazilian standards, were numerically modeled using SisBaHiA (System Base Environmental Hydrodynamics), using contaminant loads from three different sources: rivers, storm sewer and outfall . The models were implemented to represent the changes in decay forward to solar radiation and other environmental factors. Values ​​were relatively close results between modeled and monitored in the field in different scenarios. The results showed that the storm sewers are the most important sources of pollution, accounting for episodes of non-compliance with water quality standards for bathing, especially during rainy periods. Moreover, the results showed no risk of the outfall plume reaching Fortaleza bath areas the city beaches.
.
31
Stovold, Matthew R. "Modeling urban stormwater disposal systems for their future management and design." University of Western Australia. School of Environmental Systems Engineering, 2007. http://theses.library.uwa.edu.au/adt-WU2007.0111.
Texto completoResumen
[Truncated abstract]This thesis investigates aspects of urban stormwater modeling and uses a small urban catchment (NE38) located in the suburb of Nedlands in Perth, Western Australia to do so. The MUSIC (Model for Urban Stormwater Improvement Conceptualisation) model was used to calibrate catchment NE38 using measured stormwater flows and rainfall data from within the catchment. MUSIC is a conceptual model designed to model stormwater flows within urban environments and uses a rainfall-runoff model adapted to generate results at six minute time steps. Various catchment scenarios, including the use of porous asphalt as an alternative road surface, were applied to the calibrated model to identify effective working stormwater disposal systems that differ from the current system. Calibrating catchment NE38 using the MUSIC model was attempted and this involved matching modeled stormwater flows to stormwater flows measured at the catchment drainage point. This was achieved by measuring runoff contributing areas (roads) together with rainfall data measured from within the catchment and altering the seepage constant parameter for all roadside infiltration sumps. ... The MUSIC model generated future scenario outcomes for alternative stormwater disposal systems that displayed similar or improved levels of performance with respect to the current system. The following scenarios listed in increasing order of effectiveness outline future stormwater disposal systems that may be considered in future urban design. 1. 35% porous asphalt application with no sumps in 2036 2. 35% porous asphalt application with no sumps in 2064 3. 68% porous asphalt application with no sumps in 2036 4. 68% porous asphalt application with no sumps in 2064. Future scenarios using the current stormwater disposal system (with roadside infiltration sumps) with porous asphalt were also run. These scenarios reduced stormwater runoff and contaminant loading on the catchment drainage point however the inclusion of a roadside infiltration sump system may not appeal to urban designers due to the costs involved with this scenario. Climate change will affect the design of future stormwater disposal systems and thus, the design of these systems must consider a rainfall reducing future. Based on the findings of this thesis, current stormwater runoff volumes entering catchment drainage points can be reduced together with contaminant loads in urban environments that incorporate porous asphalt with a stormwater disposal design system that is exclusive of roadside infiltration sumps.
32
Seebach, Rudi Dieter. "The application of integrated environmental management to improve storm water quality and reduce marine pollution at Jeffreys Bay (South Africa)." Thesis, Link to this resource, 2006. http://eprints.ru.ac.za/779/.
Texto completo
33
McGarry, Shawna. "Local ecological knowledge of flooding in the Madison Valley neighborhood of Seattle, Washington." Online pdf file accessible through the World Wide Web, 2007. http://archives.evergreen.edu/masterstheses/Accession86-10MES/McGarry_S%20MESThesis%202007.pdf.
Texto completoResumen
Thesis (M.E.S.)--The Evergreen State College, 2007.<br>Title from title screen (viewed 1/23/2008). "A thesis: essay of distinction submitted in partial fulfillment of the Master of Environmental Studies, The Evergreen State College, June 2007." Includes bibliographical references (leaves 66-70).
34
Wright, Alan. "The artificial recharge of urban stormwater runoff in the Atlantis coastal aquifer." Thesis, Rhodes University, 1992. http://hdl.handle.net/10962/d1005491.
Texto completoResumen
The thesis covers the investigation of the storm water runoff and artificial recharge components of the Atlantis Water Resource Management Scheme in the Southwestern Cape. The objective of the study was to obtain an in-depth knowledge of the process of artificial recharge of urban storm water runoff, in order to identify the most efficient recharge management strategy for the Atlantis aquifer. To achieve the objective it was necessary to first study the existing knowledge on urban storm water hydrology and artificial recharge by spreading, and to create a conceptual model of what might be expected. The study area was then investigated to examine how closely the actual situation was reflected by the conceptual model, enabling recommendations to be made for the sound management of the system. The stormwater runoff component was found to differ from most urban hydrological studies as a result of its large baseflow component. The sandy nature of the catchment, small percentage area of effective impervious surface, and high groundwater table resulted in the baseflow constituting more than 40% of the total storm water runoff and accounting for over 60% of the pollution load. The "first flush" effect established as a major source of pollution in other studies, was found to be of minor significance in this study area. The overall stormwater quality (excluding the noxious industrial baseflow) was found acceptable for artificial recharge within the study area, although the baseflow from the industrial sub-catchments showed the potential for being a major source of pollution in the future. The treated wastewater used for artificial recharge prior to 1987 was found to be unacceptable for recharge purposes. The treated industrial effluent should under no circumstances be recharged up-gradient of the Witzand well field. The treated domestic effluent although of a poorer quality than the resident Witzand well field groundwater could be recharged in order to boost recharge volumes and form a buffer against further intrusion by the poor quality groundwater from the Brakkefontein area. This would however only be acceptable if strict water quality control is maintained and recharge does not take place west of the present basin. The recharge basin was found to be well situated with respect to influencing the Witzand wellfield and maintaining a groundwater buffer against poor quality groundwater flow from the northeast towards the central area of the wellfield. Unfortunately the surrounding low-lying topography and sandy retaining walls have resulted in return flow and raised groundwater-levels. The raised groundwater mound does not comply with the conceptual model and together with the sandy nature of the unsaturated zone resulted in less effective purification during infiltration. The practice of letting large portions of the basin floor dry-out during summer was shown to be beneficial and the periodic cleaning of the deeper portions of the basin essential. The artificially recharged water was found to have influenced the upper portion of the aquifer well beyond the West Coast Road. The study of groundwater quality being a good method for tracing artificially recharged water. The groundwater quality has improved as a result of artificial recharge since the removal of treated wastewater from the recharge basin. The groundwater was (ii) found to be very responsive to the slightest changes in recharge basin water quality or/and quantity. Management of the recharge basin therefore had to be very much of a compromise between qualitative and quantitative approaches. The present approach of recharging all the stormwater runoff throughout the year providing the most efficient compromise under the present conditions. The study revealed that the most efficient recharge management strategy would be the recharge of treated domestic sewage effluent in the present recharge basin and all residential storm water runoff plus industrial "storm flow" stormwater runoff in a new recharge basin located northwest of the present basin. Strict water quality control must be maintained on the water discharged into the basins and an annual wet/dry cycle implemented within the basins to boost infiltration. The entire system should continue being monitored to safe guard the groundwater resource from pollution and over exploitation.
35
Lonsdale, K. G. "Monitoring of storm sewer overflows." Thesis, Sheffield Hallam University, 1994. http://shura.shu.ac.uk/7114/.
Texto completoResumen
The poor quality of many receiving waters has been attributed to the frequent operation of combined sewer overflows (C. S. O. s). As the existing need for overflow structures is unlikely to change in the foreseeable future it is imperative that these deleterious effects are minimised. The present study investigates the pollution performance of three common overflow structure designs (the stilling pond, the double high side weir and the double low side weir) and aims to institute a novel pollution monitoring methodology for combined sewer overflows. Four sites in the central Sheffield area were monitored for periods from 9 to 13 months (two high-side weirs, one low-side weir and a stilling pond). Each overflow was monitored with continuous flow measurement equipment and bottle samplers to obtain samples of sewage from the storm and dry weather flows. The bottle samples were analysed for suspended solids (SS), ash, BOD, COD, pH, conductivity and ammonia. Mesh bags and frames were also installed to trap the gross solids (solids with a median size>6mm) from the inflow and the spill flow. The stilling pond and the high side weirs were found to perform well hydraulically, limiting the flow to treatment to a steady maximum. The low side weir performed unsatisfactorily, hydraulically, as the flow to treatment rose as the incoming flow increased and, for some storm conditions, a hydraulic jump formed towards the downstream end of the chamber. The first foul flush was regularly observed at the stilling pond and low side weir sites. Peak concentrations for SS were found to be 600 times greater than the dry weather flow for the same time of day. The first foul flush was rarely observed at the other sites. For the majority of storms at each site the spill concentrations were of a similar magnitude to the inflow sample concentrations. However for a large minority of SS, BOD and COD samples, the concentrations of the spill samples were significantly less than the inflow samples. t-Tests suggested that at the stilling pond and high side weir sites there is a significant reduction in the spill sample concentrations for the water quality (bottle) samples. Although the load of material spilled during an overflow event was found to be small in comparison to the inflow load, large amounts of material were spilled to the watercourse during storm events at each of the sites investigated. The storm load entering the CSO was found to be considerably influenced by peak intensity of the storm at the stilling pond site and antecedent dry weather period at one of the high side weir sites. At the other sites a number of hydrological factors were found to be influential e. g. duration. It is thought that time of year may also be important factor as this influences the type of rainfall (its duration and intensity). The types of gross solid collected at each site were similar with leaf material and sanitary towels consistently being the major items in terms of total mass. The efficiency of the stilling pond and one of the high side weirs in retaining gross solids in the flow to treatment appeared to be explained by the flow split although for 5 of 14 storms at the stilling pond and 3 of 7 at the high side weir a treatment effect was observed. The treatment factors at the low side weir were noticeably less than those for the other three sites with all being less than unity (average 0.5). This suggests that the low side weir preferentially discharges gross solid material over the weir. The treatment factors at the other high side weir were low due to inadequate sampling of the spill flow.
36
Howarth, D. A. "The hydraulic performance of scale model storm sewer junctions." Thesis, University of Manchester, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.355907.
Texto completo
37
Settle, Steve. "Monitoring of urban stormwater runoff for solids and phosphorus determination using key and surrogate physico-chemical indicators." Thesis, Queensland University of Technology, 2001. https://eprints.qut.edu.au/36144/1/36144_Settle_2001.pdf.
Texto completoResumen
Solids and phosphorus within urban stormwater have the potential to cause environmental damage to the ecological systems in freshwater streams and receiving
waters. The evaluation of these pollutants is undertaken by physico-chemical monitoring programs which sample streamflow for laboratory assessment. These
programs require assessment of a range of issues to allow development of a monitoring system design. Current monitoring approaches have limitations in the
conditions under which data can be sampled and the extent of information which can
be collected. The understanding of catchment storage and transportation behaviour
as well as waterway processes provides opportunity to develop improved knowledge if system behaviour and the methods whereby assessment can be made using
monitoring systems. Data sets from four monitoring programs covering a range of waterways in Pine
Rivers Shire have been examined for the catchment characteristics which influence solids and phosphorus discharge behaviour and the potential for surrogate indicators to predict streamflow concentration. The study involved partitioning of the components based on the dissolved and particulate fractions and the flow condition.
Suspended solids and particulate phosphorus were found to be determined by the
extent of urbanisation and the magnitude of the flow event. Whereas dissolved solids and dissolved phosphorus were found to be a greater component of base flow
delivered from subsurface movement.
Surrogate indicators were evaluated as a technique to supplement key indicator
analysis by providing a measurement technique which is site based or utilises less laboratory effort. The investigation of the physical and chemical behaviour of solids and phosphorus allowed the identification of a number of parameters with the potential for interrelationship. Relationships were developed for suspended and dissolved solids using turbidity and conductivity and for dissolved and particulate
phosphorus using suspended and dissolved solids. The relationships were found to be generic in the case of solids determination and catchment specific for phosphorus. The relationships will allow enhancement of monitoring knowledge to provide increased information on spatial and temporal variation of indicator concentrations.
38
Mehmood, Khalid. "Studies on sewer flow synthesis with special attention to storm overflows." Thesis, University of Liverpool, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245819.
Texto completoResumen
A model is developed, using a unit hydrograph approach for sewer flow synthesis and a simple mixing model to calculate the pollution load from combined sewer overflows, to simulate the long-term behaviour of storm overflows in combined sewerage systems. It is shown that this procedure synthesizes overflow operation characteristics to acceptable engineering accuracy, measured relative to the adopted standard for UK practice, namely predictions from the WALLRUS suite of engineer's software. This is achieved at only a small fraction of the computer runtime and so makes practicable a wide range of overflow performance and river impact studies using local rainfall records of unlimited extent. The model is applied successfully to three drainage networks. Results show that the model, COSSOM, achieves predictions with respect to runoff volume and overflow characteristics well within : 00 % of full. WALLRUS applications. Sensitivity studies demonstrate that performance of the model improves when catchment unit hydrographs are obtained, by preliminary application of WALLRUS using a rainfall intensity close to the maximum in the observed data and for rain duration close to the time of concentration of each sub-catchment under study. It is also shown that with little loss in accuracy relative to application of the WALLRUS approach for unit hydrograph development, COSSOM can be operated with other rainfall/runoff/pipeflow models.
39
Sun, Si'ao. "Decision-making under uncertainty : optimal storm sewer network design considering flood risk." Thesis, University of Exeter, 2010. http://hdl.handle.net/10036/112863.
Texto completoResumen
Storm sewer systems play a very important role in urban areas. The design of a storm sewer system should be based on an appropriate level of preventing flooding. This thesis focuses on issues relevant to decision-making in storm sewer network design considering flood risk. Uncertainty analysis is often required in an integrated approach to a comprehensive assessment of flood risk. The first part of this thesis discusses the understanding and representation of uncertainty in general setting. It also develops methods for propagating uncertainty through a model under different situations when uncertainties are represented by various mathematical languages. The decision-making process for storm sewer network design considering flood risk is explored in this thesis. The pipe sizes and slopes of the network are determined for the design. Due to the uncertain character of the flood risk, the decision made is not unique but depends on the decision maker’s attitude towards risk. A flood risk based storm sewer network design method incorporating a multiple-objective optimization and a “choice” process is developed with different design criteria. The storm sewer network design considering flood risk can also be formed as a single-objective optimization provided that the decision criterion is given a priori. A framework for this approach with a single objective optimization is developed. The GA is adapted as the optimizer. The flood risk is evaluated with different methods either under several design storms or using sampling method. A method for generating samples represented by correlated variables is introduced. It is adapted from a literature method providing that the marginal distributions of variables as well as the correlations between them are known. The group method is developed aiming to facilitate the generation of correlated samples of large sizes. The method is successfully applied to the generation of rainfall event samples and the samples are used for storm sewer network design where the flood risk is evaluated with rainfall event samples.
40
Dennis, Peter. "Longitudinal dispersion due to surcharged manholes." Thesis, University of Sheffield, 2000. http://etheses.whiterose.ac.uk/14802/.
Texto completoResumen
Greater environmental considerations and the desire to reduce pollution overflows to watercourses are requiring engineers to develop a better understanding of the processes involved in pollution transport through sewer networks. Furthermore, developments in modelling techniques and computer power are allowing urban drainage modellers to increase the complexity of their software and so demand additional data that can be incorporated. Presently, an important aspect is quantifying the retention time and dispersion of pollutants entering an urban drainage system. Manholes provide a means of sewer access for maintenance and inspection. Under storm flow conditions they are liable to surcharge above the level of the pipe soffit. This creates a storage volume that has an impact on the longitudinal dispersion and travel time of soluble pollutants in sewer systems. A laboratory investigation has been completed to quantify these effects for various manhole configurations. These include step heights between the inlet and outlet pipes, benching and extreme high surcharge conditions. In addition, re·analysis of previously acquired data has allowed variations in manhole diameter to be considered. Numerical modelling using computational fluid dynamics, combined with laser light sheet visualisation of the flow structures within manholes, has provided greater insight into the processes causing longitudinal dispersion. The coefficients required for two existing longitudinal dispersion models, the advection dispersion equation and the aggregated dead zone model, have been determined by means of an optimisation process. This has been undertaken with computer software specifically written for the purpose. The technique adopted for optimisation is fully detailed. Final conclusions regarding the longitudinal dispersion due to surcharged manholes are presented.
41
Mancipe, Muñoz Nestor Alonso. "Detention-based Green/Gray Infrastructure Framework to Control Combined Sewer Overflows." University of Cincinnati / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1439307033.
Texto completo
42
Su, Yuming. "Storm water runoff treatment with multi-chamber pipes." Ohio : Ohio University, 2002. http://www.ohiolink.edu/etd/view.cgi?ohiou1177524622.
Texto completo
43
Griffen, Lindsay M. "Reducing Pollutants in Industrial Stormwater Runoff: Improved Water Quality Protection Using Prioritized Facility Regulation." [Tampa, Fla.] : University of South Florida, 2005. http://purl.fcla.edu/fcla/etd/SFE0001377.
Texto completo
44
Hubbard, Britt Adam. "KNOWLEDGE, EFFORTS, AND ASSOCIATED EXPENSES OF COMPLYING WITH STORMWATER PHASE II REGULATIONS BY COMMUNITY LEADERS IN SMALL MUNICIPAL STORM SEWER SYSTEMS (MS4s) OF MISSISSIPPI." MSSTATE, 2008. http://sun.library.msstate.edu/ETD-db/theses/available/etd-10222007-153251/.
Texto completoResumen
In March 2003, many communities in Mississippi fell under National Pollutant Discharge Elimination System (NPDES) regulations and were required to develop Stormwater Pollution Prevention Plans (SWPPPs). This study surveyed those in charge of SWPPPs in Mississippis regulated communities to determine the knowledge, efforts, and associated expenses, of complying with Stormwater Phase II regulations as well as what attempts regulated communities made to include urban forestry in their SWPPPs. While results indicated that all respondents were compliant with Stormwater Phase II regulations, regulated communities can improve efforts in several areas to best mitigate stormwater runoff pollution (e.g., public education and urban forestry). Findings will be useful when presented to current and, soon to be, regulated communities in an educational and outreach effort to increase their knowledge levels, reduce incurred costs, increase the effectiveness of their SWPPP, and enhance their ability to utilize urban and community forests as a stormwater mitigation tool.
45
Mauerová, Martina. "Zdravotně technické instalace v obytné budově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265525.
Texto completoResumen
This Diploma thesis deals with design sanitation installation in a residential building in Prague. The theoretical part is aimed at determining the calculation of flow in the sup-ply duct according to standards. The work also focuses on the alternative solutions of the given specialization. The computational part and project includes a proposal sani-tary and storm sewer, water supply system and their connection to the current pipes. It is a residential building with four overground floors and with two underground floors.
46
Hagelin, Robert, and Steve Mbanzabugabo. "Fördröjning av dagvatten." Thesis, KTH, Byggvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-174359.
Texto completoResumen
Den ökade mängden hårdgjorda ytor i städerna skapar en större och snabbare avrinning av dagvatten till ledningsnäten. En del av dagens befintliga ledningar klarar inte av att hantera denna ökade mängd dagvatten. En snabb och kortsiktig lösning på lösa detta problem är att anlägga fördröjningsmagasin som avlastar ledningsnäten. Fram till denna tidpunkt har det inte utförs tillräckligt med undersökningar kring de olika effekter som placeringen av ett fördröjningsmagasin medför. Ett fördröjningsmagasin som anläggs för att fördröja flödet av dagvatten från ett delområde kan, vid felplacering, ha en negativ verkan på flödet längre ner i ledningsnätet. Denna flödesreglering kan vara till nackdel för ledningsnätet eftersom det fördröjda flödet från delområdet kan samverka med flödestoppen från en annan del av området och kan skapa översvämningar. Syftet med denna rapport var att undersöka om olika placeringar av ett fördröjningsmagasin hade någon effekt på flödet i ett dagvattensystem. Målet var att finna placeringar där ett fördröjningsmagasin förhindrade en samverkan av flödestoppar och minskade antalet översvämningarna i ledningsnätet. Arbetet utfördes genom hydraulisk modellering i programmet MIKE URBAN. I programmet undersöktes två olika modeller över dagvattensystem. Resultaten ur de två modellerna visar på att placeringen av magasin i ett dagvattensystem har betydelse för hur översvämningar kan undvikas. Lägst antal översvämningar uppstod när magasinen placerades i viktiga knutpunkter på ledningsnätet. Mer tid och resurser bör läggas ner på att undersöka effekten av fördröjningsmagasinets position och dimension innan de placeras ut i dagvattensystemet. På detta sätt kan både kostnader minskas och framtida problem undvikas.<br>The increased amount of impermeable surfaces in the cities creates a larger and faster runoff of rainwater into the drainage systems. Some of today's existing pipelines are not able to handle this increased amount of storm water. A quick and short term solution to solve this problem is to construct delaying reservoirs that unburden the drainage system. Up to this point, not enough studies have been conducted on the different effects that a placement of a reservoir brings to a drainage system. If incorrectly positioned, a reservoir built for delaying the flow of storm water from a section of a drainage system can, have a negative effect on the flow further down the system. This flow regulation can be harmful to the system when the delayed flow from the section can interact with the flood peak from another section and can cause flooding. The purpose of this report was to study if different placements of a reservoir had any effect on the flow in a storm water drainage system. The aim was to find places where a reservoir could be positioned to prevent the collaboration of peak flows. This thesis was mainly conducted with the use of the hydraulic modeling program MIKE URBAN in which studies of two models are the bases of the results presented in this report. The results from the two models show that the placement of a reservoir in a drainage system has a large sway on how to avoid flooding. The least amount of floods was attained when the reservoir was placed in certain key positions in the drainage system. More time and resources should be devoted to further investigate the effect of a reservoir’s position and dimensions before being placed into a drainage system. This way, expenditures could be reduced and simultaneously future flooding avoided.
47
Samad, Sumayia Binte. "Cohabiting Third Place: Integrating Natural Hydrology with Healing Architecture." Thesis, Virginia Tech, 2020. http://hdl.handle.net/10919/98842.
Texto completoResumen
Washington D.C. has been ranked third among U.S. cities in terms of its percentage of youth who have reported a severe major depressive episode. Depression, stress, anxiety are the uninvited visitors of our day-to-day urban living. Most of the time we ignore our mental health unless we reach the threshold. We know nature is the best healer. The District also has reported the highest percentage of parkland but this statistic is not helping regarding Healing and Wellness. There might be a missing piece of the puzzle to reconnect with nature.
To dive deep into the missing piece, I have looked back to the basics, into the four elements of the planet, Earth, Water, Air, and Fire. This thesis is an exploration of the most important natural element, Water, along with the other three elements, as active participants in our everyday urban life, not only as a means of reconnecting with nature but also aiding with natural healing to our depressed, tired soul.
As with many other older cities, Washington D.C. mostly depends on the combined storm and sanitary sewer. During heavy rainfall, stormwater overflows the capacity of the sewage system and empties into the river with sewage. But there is an opportunity for the stormwater to be treated and reused at the site. Rainwater along with tapped groundwater as the perennial flow will be considered as the source of healing water in the dense downtown context of the District. The thesis will tell the story of the arrival of Water into the middle of the city. Water will be examined in all its forms and integrated with the Third Place, where the young working generation can come in the middle of the working day to catch a lunch break or after office rush hour to relax their stressed nerves and heal their inner soul. This design for a community learning center at First Street NE in NoMA neighborhood, Washington D.C. is an effort to trace the path of the long-lost Tiber Creek and to provide the inhabitants with a for Water and growth.<br>Master of Architecture<br>Washington D.C. has been ranked third among U.S. cities in terms of its percentage of youth who have reported a severe major depressive episode. Depression, stress, anxiety are the uninvited visitors of our day-to-day city life. Most of the time we ignore our mental health unless we reach the threshold. We know nature is the best healer. The District also has reported the highest percentage of the green area but maybe only the "Green" is not enough for healing. To dive deep into the missing piece of the puzzle, I have walked back to the basics, looking into the four elements of the planet, Earth, Water, Air, and Fire. This thesis is an exploration of the most important natural element, Water, along with the other three elements, in architecture and urban design, not only as a means of reconnecting with nature but also aiding with natural healing to our depressed, tired soul.
As with many other older cities, Washington D.C. mostly depends on the combined storm and sanitary sewer. During heavy rainfall, stormwater overflows the capacity of the sewage system and empties into the river with sewage. In this research, rainwater is considered as the source of healing water in the dense downtown context of the District. This thesis also examined tapping groundwater and bring it to the city street level. The thesis will tell the story of the arrival of Water into the middle of the city. This design for a community learning center at First Street NE in NoMA neighborhood, Washington D.C. is an effort to trace the path of the long-lost Tiber Creek and to provide the inhabitants with a place for Water and growth.
48
Vaněk, Ondřej. "Zdravotně technické a plynovodní instalace v obytné budově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240328.
Texto completoResumen
The thesis deals with sanitary engineering and gas installation in an apartment building with a healthcare facility. The theoretical part is focused on the installation systems, which are addressed to the suitability of the system in the given project, and the advantages and disadvantages of these systems. Computational and project part addresses the sewer, water mains and gas in the specified object. Designed building is without a basement and eight storeys. On the first floor is located technical facilities around the building and three residential units. All other floors are located on each floor of four residential units. This thesis is done on the basis of current Czech and European regulations.
49
Valášek, Martin. "Zdravotně technické instalace v bytovém domě s komerčními prostory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227246.
Texto completoResumen
This thesis describes the design of plumbing in an apartment building with commercial space in Ilava. The theoretical part is devoted to the design of the container hot drinking water and it´s possible alternatives. The work also focuses on possible solutions diploma work. Computational part of a project proposal contains sewage and rainwater drainage, water supply systems and connecting the building to the existing network hardware. It is a residential house, which is in part intended for commercial premises and the second part is intended for housing. The building has four floors and no basement.
50
Hadačová, Jana. "Zdravotně technické a plynovodní instalace v bytovém domě se zdravotnickým zařízením." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227759.
Texto completoResumen
This diploma thesis deals with health-technical and gas piping in the asylum building. The topic Rain Water Handling is the theoretical part where the usage of water is discussed according to the legal regulations and its functionality. The computational and project part deals with sewerage, water and gas distribution system in this two floors non-cellar asylum building. This bachelor thesis is written according to Czech and European regulations