Acceder

Bibliografías temáticas / Robot à double bras / Artículos de revistas

Siga este enlace para ver otros tipos de publicaciones sobre el tema: Robot à double bras.

Artículos de revistas sobre el tema "Robot à double bras"

Autor: Grafiati

Publicado: 11 de enero de 2025

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Consulte los 50 mejores artículos de revistas para su investigación sobre el tema "Robot à double bras".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Explore artículos de revistas sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.

1

Soubeyrand, Marc, Romain Dayan, Matthieu Begin y Alexandre Dos Santos. "Double ligamentoplastie de l’avant-bras pour instabilité complexe antébrachiale". Chirurgie de la Main 34, n.º 6 (diciembre de 2015): 371. http://dx.doi.org/10.1016/j.main.2015.10.111.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Mayer, Jessica, Nadia Zainuddin, Rebekah Russell-Bennett y Rory Francis Mulcahy. "Scaring the bras off women". Journal of Service Theory and Practice 29, n.º 3 (2 de octubre de 2019): 233–57. http://dx.doi.org/10.1108/jstp-11-2017-0196.

Texto completo

Resumen

Purpose The purpose of this paper is to understand the role of perceived threat, brand congruence, and social support on consumer coping strategies for a preventative health service. Design/methodology/approach An online survey of 570 women aged over 50 in one Australian state was conducted (users and non-users of the service). The data were analyzed using structural equation modeling. Findings A competing models approach reveals that threat on its own is associated with avoidance coping; however, when brand congruence is high, there is an association with active coping. Social support appears to have a buffering effect on threat and is associated positively with active coping and negatively with avoidance coping. Originality/value The study findings suggest that threat appeals should be used with caution in increasing participation in transformative preventative health services due to its double-edged sword effect (increasing both avoidance and active coping). When consumers have social support, this results in active coping and buffers avoidance coping. This research offers useful insights for social marketing and transformative service research.

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Shin, Kristina, Kaoru Leung, Fred Han y Jiao Jiao. "Thermal and moisture control performance of different mastectomy bras and external breast prostheses". Textile Research Journal 90, n.º 7-8 (22 de octubre de 2019): 824–37. http://dx.doi.org/10.1177/0040517519881815.

Texto completo

Resumen

This paper introduces a project involving a thermoregulation performance experiment design to evaluate the different responses of research subjects to a range of mastectomy bras and external breast prostheses. A set of newly designed heat-reduction mastectomy bras and prostheses were mix-matched with a set of conventional mastectomy bras and prostheses for the experiment. Four combinations of mastectomy bras and external breast prostheses were used: (a) Com A: conventional mastectomy bra and conventional prosthesis; (b) Com B: conventional mastectomy bra and heat-reduction prosthesis; (c) Com C: heat-reduction mastectomy bra and conventional prosthesis; and (d) Com D: heat-reduction mastectomy bra and heat-reduction prosthesis. Nine healthy male subjects (mean age: 31.9 ± 5.9 y and mean under-bust circumference: 35.3 ± 2.8 in) participated in this study in lieu of women who had undergone surgery for double mastectomy and were too self-conscious to expose their scars for sensor attachment. Eight sets of temperature and humidity sensors were placed between the surface of the skin and the prostheses and bra to measure the changes in both temperature and humidity data in a microclimate environment while the participants performed physical activity. The results showed that Com D demonstrated better thermal and moisture control, resulting in lower body temperature and lower humidity increment throughout the entire experiment. The study proved that the heat-reduction mastectomy bra and external breast prosthesis were effective in releasing the trapped heat and perspiration underneath the bra, and thus would provide a positive impact on clothing comfort and wearing experience for women who had undergone mastectomies.

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Roumiguie, M., J. Beauval, X. Game, M. Soulie, B. Malavaud, P. Rischmann y N. Doumerc. "Optimisation de l’utilisation du 4e bras lors de la prostatectomie totale laparoscopique robot-assistée". Progrès en Urologie 24, n.º 13 (noviembre de 2014): 895. http://dx.doi.org/10.1016/j.purol.2014.09.014.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

SUZUKI, Yasufumi y Hideaki MINAKATA. "Developing Double Ball Balancing Robot". Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) 2016 (2016): 2A2–07a5. http://dx.doi.org/10.1299/jsmermd.2016.2a2-07a5.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Petr, Navrátil. "Laboratory Mobile Double Track Robot". Procedia Engineering 48 (2012): 463–68. http://dx.doi.org/10.1016/j.proeng.2012.09.540.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Umari, P., G. Bondonno, M. Billia, A. La Rocca, J. Di Martino y A. Volpe. "Robot-assisted double district excision". European Urology Supplements 18, n.º 6 (septiembre de 2019): e2703. http://dx.doi.org/10.1016/s1569-9056(19)32802-7.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Takahashi, Hiromasa, Shinji Ichida, Naoyuki Hara, Fujio Terai, Takuro Kazama, Kenichiro Kanno y Junichiro Ooga. "Hydraulic-and-electric Double-arm Robot". Journal of the Robotics Society of Japan 34, n.º 1 (2016): 33–39. http://dx.doi.org/10.7210/jrsj.34.33.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Yu, Miao, Jing Ji y Hui Ping Liu. "Communication of Double-Robot Polishing System". Advanced Materials Research 490-495 (marzo de 2012): 1217–20. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.1217.

Texto completo

Resumen

This paper puts forward a C/S control model that is made up of the double--robot polishing system. Based on the double-robot system which is made up of two MT-Arm 6-DOF serial robots, the method of motion control and communication between two robots are introduced. In the end, the mutual communication can be accomplished by two robots and the robot position and status information can be transported with programming of the win socket.

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Nakashima, Seiichiro, Nobutoshi Torii y Akihiro Terada. "Double hand for an industrial robot". International Journal of Radiation Applications and Instrumentation. Part B. Nuclear Medicine and Biology 13, n.º 5 (enero de 1986): ii. http://dx.doi.org/10.1016/0883-2897(86)90150-9.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

11

Salaun, Gaëlle, Eleonore Eymard-Pierre, Laetitia Gouas, Patricia Combes, Gwendoline Soler, Lauren Veronese, Andreï Tchirkov, Carole Goumy, Philippe Vago y Céline Pebrel-Richard. "Identification d’un double isodicentrique du bras court du chromosome Y chez un nouveau-né". Morphologie 103, n.º 342 (noviembre de 2019): 77–78. http://dx.doi.org/10.1016/j.morpho.2019.10.040.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

12

Dayan, Romain, Brice Viard, Alexandre Dos Santos, Philippe Leclerc, Charles Court, Olivier Gagey y Marc Soubeyrand. "Ligamentoplastie à double faisceau de la membrane interosseuse de l’avant-bras – évaluation anatomique et biomécanique". Revue de Chirurgie Orthopédique et Traumatologique 101, n.º 7 (noviembre de 2015): S233. http://dx.doi.org/10.1016/j.rcot.2015.09.227.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

13

Lin, Jieqiong, Zhenyan Zhu, Xian Jing, Mingming Lu y Yan Gu. "Magnetic Driven Double Curved Conical Microhelical Robot". Advanced Theory and Simulations 4, n.º 12 (13 de octubre de 2021): 2100189. http://dx.doi.org/10.1002/adts.202100189.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

14

Shang, Xue Lai. "Research on the Structure Design of Double Eccentric Coaxial Spherical Robot". Applied Mechanics and Materials 539 (julio de 2014): 9–12. http://dx.doi.org/10.4028/www.scientific.net/amm.539.9.

Texto completo

Resumen

The paper design a double eccentric mass driven spherical robot, the ball is also subject to eccentric force and inertia force that generate by internal drive units in movement. Due to the unique spherical shell, the robot in the dynamic state transition process, Friction cannot offset the robot motion state change due to internal driving motion error of small units. In order to make linear movement of the spherical robot that can smooth start, stop and speed control, the paper design a method for linear motion driven spherical robot with double eccentric mass control. The improved driving eccentric mass of robot total mass ratio is larger, that can provide the eccentric torque and inertia moment more, the robot has higher motion velocity.

Los estilos APA, Harvard, Vancouver, ISO, etc.

15

ZHANG, YING, TAO LI, FENG-YUAN ZOU, CHENG-HA YU y LEI DU. "Facile fabrication of functional bra cup by an automated dispensing system". Industria Textila 70, n.º 05 (31 de octubre de 2019): 421–25. http://dx.doi.org/10.35530/it.070.05.1583.

Texto completo

Resumen

The goal of the study is to develop a novel method to manufacture the functional bras. The high precision three-dimensional (3D) scanner was employed to get the point cloud data. A fixed mount was invented to keep the bra cup stable and decrease measuring error. A bottom holder was prepared by the 3D printer to place the bra cup during the injection process. Furthermore, the injection points coordinate values and the injection volumes can be determined based on the 3D image of the bra cup and the thickness of those positions. At last, the three-axis automatic robot which was coupled with a precision liquid dispenser is used to inject the microcapsules solution into the bra cup for the preparation of functional intimate apparel. The proposed method was verified to be feasible and effective through a practical example.

Los estilos APA, Harvard, Vancouver, ISO, etc.

16

Richard, C., J. Hascoet, C. Mazouin, L. Freton, L. Tondut, G. Dosin, A. Manunta et al. "Explantation d’une prothèse de promontofixation par voie transvésicale et exérèse des bras d’une bandelette tvt laparoscopique robot-assistée". Progrès en Urologie 30, n.º 13 (noviembre de 2020): 851. http://dx.doi.org/10.1016/j.purol.2020.08.041.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

17

Song, Zhibin, Zhongru Fu, Donato Romano, Paolo Dario y Rongjie Kang. "A Novel Fish-Inspired Robot with a Double-Cam Mechanism". Machines 10, n.º 3 (6 de marzo de 2022): 190. http://dx.doi.org/10.3390/machines10030190.

Texto completo

Resumen

Fishes have evolved different excellent swimming strategies. To study the influence of tail fin swing on the swimming performance of bionic robot fish, with one joint under the same tail swing frequency and amplitude, we designed a novel robot fish, driven by a double-cam mechanism. By designing the profile of the cam in the mechanism, the robot fish can achieve different undulatory motion trajectory of the caudal fin under the same tail swing frequency and amplitude. The mechanism simulated the undulatory motion of crucian carp. We studied the influence of undulatory motion on the swimming speed of robot fish, which was analyzed by dynamic analysis of the undulatory motion and experiments. According to the experimental results, we can find that the swimming speed of the robotic fish is different under various wave motions. When other conditions are the same, the speed that the robot fish can achieve by imitating the swing motion of the real fish is 1.5 times that of the robot fish doing the cycloid motion. The experimental results correspond to the kinetic analysis results. Furthermore, it is proven that the robot fish with a low caudal peduncle stiffness swims faster under a low swinging frequency, and the speed of a robot fish with a high caudal peduncle stiffness is higher under a high tail swinging frequency.

Los estilos APA, Harvard, Vancouver, ISO, etc.

18

Jin-gang, Jiang, Zhang Yong-de y Zhang Shu. "Implementation of glass-curtain-wall cleaning robot driven by double flexible rope". Industrial Robot: An International Journal 41, n.º 5 (12 de agosto de 2014): 429–38. http://dx.doi.org/10.1108/ir-01-2014-0303.

Texto completo

Resumen

Purpose – The purpose of this paper is to implement a glass-curtain-wall cleaning robot driven by a double flexible rope, so as to replace manual cleaning. The glass-curtain-wall, because of its excellent daylighting performance, damp-proofing characteristics, heat insulation properties and aesthetics, is widely used in modern city buildings. For glass-curtain-wall buildings, regular cleaning of the glass-curtain-wall is necessary to ensure that the surface of the building appears clean and tidy, which in turn contributes toward preserving the overall aesthetic appearance of the city. Currently, the primary method of cleaning glass curtain walls is manual cleaning by workers on a suspended platform. Design/methodology/approach – The mechanical structure of the proposed glass-curtain-wall cleaning robot driven by a double flexible rope is inspired by the way a spider moves by pulling its silk draglines in the air. For self-locking protection and increased rope friction, the robot’s moving section includes a worm reducer and multislot master–slave roller. The cleaning section comprises a water tank, control valve, shower nozzle and brush. The wall adsorbing section is realized by a double rotor. The workspace of the robot is analyzed. Flexible rope winding and unreeling control of the cleaning robot is deduced. The force of the cleaning robot when the double rotor is working is analyzed and calculated. The prototype of the glass-curtain-wall cleaning robot model driven by a double flexible rope is established, and experiments wherein the robot moves along a preset track, as well as cleaning experiments, are performed. Findings – The prototype of the glass-curtain-wall cleaning robot model driven by a double flexible rope can move along the preset track, satisfy the design functions and clean effectively. The experimental results verify the validity and practicality of the robot. Research limitations/implications – The implication of this research is that a glass-curtain-wall cleaning robot model driven by a double flexible rope fulfills the movement strategy and drive-type requirements for cleaning glass curtain walls. The limitation of this research is that it is difficult to implement rapid cleaning. Originality/value – The traditional method of manual cleaning by workers on a suspended platform will be changed after the glass-curtain-wall cleaning robot is manufactured, and the advent of this cleaning robot for the low- and mid-rise buildings will reduce the cost of cleaning buildings, improve the working environment and enhance production efficiency.

Los estilos APA, Harvard, Vancouver, ISO, etc.

19

Li, Changyang, Huapeng Wu, Harri Eskelinen y Haibiao Ji. "Mobile parallel robot machine for heavy-duty double-walled vacuum vessel assembly". Industrial Robot: the international journal of robotics research and application 48, n.º 4 (7 de junio de 2021): 523–31. http://dx.doi.org/10.1108/ir-10-2020-0228.

Texto completo

Resumen

Purpose This paper aims to present a detailed mechanical design of a seven-degrees-of-freedom mobile parallel robot for the tungsten inert gas (TIG) welding and machining processes in fusion reactor. Detailed mechanical design of the robot is presented and both the kinematic and dynamic behaviors are studied. Design/methodology/approach First, the model of the mobile parallel robot was created in computer-aided design (CAD) software, then the simulation and optimization of the robot were completed to meet the design requirements. Then the robot was manufactured and assembled. Finally, the machining and tungsten inert gas (TIG) welding tests were performed for validation. Findings Currently, the implementation of the robot system has been successfully carried out in the laboratory. The excellent performance has indicated that the robot’s mechanical and software designs are suitable for the given tasks. The quality and accuracy of welding and machining has reached the requirements. Originality/value This mobile parallel industrial robot is particularly used in fusion reactor. Furthermore, the structure of the mobile parallel robot can be optimized for different applications.

Los estilos APA, Harvard, Vancouver, ISO, etc.

20

Zhang, Yang, Hongzhe Jin y Jie Zhao. "Dynamic Balance Control of Double Gyros Unicycle Robot Based on Sliding Mode Controller". Sensors 23, n.º 3 (17 de enero de 2023): 1064. http://dx.doi.org/10.3390/s23031064.

Texto completo

Resumen

This paper presents a doublegyroscope unicycle robot, which is dynamically balanced by sliding mode controller and PD controller based on its dynamics. This double−gyroscope robot uses the precession effect of the double gyro system to achieve its lateral balance. The two gyroscopes are at the same speed and in reverse direction so as to ensure that the precession torque of the gyroscopes does not interfere with the longitudinal direction of the unicycle robot. The lateral controller of the unicycle robot is a sliding mode controller. It not only maintains the balance ability of the unicycle robot, but also improves its robustness. The longitudinal controller of the unicycle robot is a PD controller, and its input variables are pitch angle and pitch angular velocity. In order to track the set speed, the speed of the unicycle robot is brought into the longitudinal controller to facilitate the speed control. The dynamic balance of the designed double gyro unicycle robot is verified by simulation and experiment results. At the same time, the anti−interference ability of the designed controller is verified by interference simulation and experiment.

Los estilos APA, Harvard, Vancouver, ISO, etc.

21

Lee, Cheong Hee, Soo Hyun Kim, Sung Chul Kang, Mun Sang Kim y Yoon Keun Kwak. "Double-track mobile robot for hazardous environment applications". Advanced Robotics 17, n.º 5 (enero de 2003): 447–59. http://dx.doi.org/10.1163/15685530360663436.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

22

Zhao, Qiu Ling y Li Yang. "A Dynamics Analysis of a Double-Legs Robot". Applied Mechanics and Materials 494-495 (febrero de 2014): 1152–55. http://dx.doi.org/10.4028/www.scientific.net/amm.494-495.1152.

Texto completo

Resumen

A passive-walking of a double-legs planar Robot is considered. The dynamic equation of the system walking down a shallow slope, powered only by gravity is established according to Lagrange method. After the equation was transferred to a dimensionless one, it shows the motion is depended not only on the free parameter, the ramp slope γ, but also on the ratio of m/M, m is mass of the foot of the model and M is the mass of the hip as well; The analytic calculations show that at the identical ramp slope γ, the whole moving has different phases: stable period walking and chaos with the increasing of m/M. Its phase portraits and graph of step time interval show the influence to the motion because of the ratio of m/M.

Los estilos APA, Harvard, Vancouver, ISO, etc.

23

Carlucho, Ignacio, Mariano De Paula y Gerardo G. Acosta. "Double Q-PID algorithm for mobile robot control". Expert Systems with Applications 137 (diciembre de 2019): 292–307. http://dx.doi.org/10.1016/j.eswa.2019.06.066.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

24

Kuric, Ivan, Vladimír Tlach, Milan Sága, Miroslav Císar y Ivan Zajačko. "Industrial Robot Positioning Performance Measured on Inclined and Parallel Planes by Double Ballbar". Applied Sciences 11, n.º 4 (17 de febrero de 2021): 1777. http://dx.doi.org/10.3390/app11041777.

Texto completo

Resumen

Renishaw Ballbar QC20–W is primarily intended for diagnostics of CNC machine tools, but it is also used in connection with industrial robots. In the case of standard measurement, when the measuring plane is parallel to the robot base, not all robot joints move. The purpose of the experiments of the present article was to verify the hypothesis of the motion of all the robot joints when the desired circular path is placed on an inclined plane. In the first part of the conducted experiments is established hypothesis is confirmed, through positional analysis on a simulation model of the robot. They are then carried out practical measurements being evaluated the influence of individual robot joints to deform the circular path, shown as a polar graph. As a result, it is found that in the case of the robot used, changing the configuration of the robot arm has the greatest effect on changing the shape of the polar graph.

Los estilos APA, Harvard, Vancouver, ISO, etc.

25

Liang, Peng, Xueshan Gao, Qingfang Zhang, Mingkang Li, Rui Gao y Yuxin Xu. "Analysis and experimental research on motion stability of wall-climbing robot with double propellers". Advances in Mechanical Engineering 13, n.º 9 (septiembre de 2021): 168781402110477. http://dx.doi.org/10.1177/16878140211047726.

Texto completo

Resumen

This paper presents a wall-climbing robot which can stably hold and move on the ground-wall surface. The robot uses propeller reverse thrust as an adsorption force and can adapt to the surface of several media materials. The influence of the robot’s structural parameters on its power system is analyzed by comparing a single power system test and a robot prototype power test. A structural analysis of the robot is performed under two specific situations; when he is in transition from the ground to a small slope, and when he is on the slope. The force state of the robot is then obtained in different conditions. Experimental results show that the adjustment range of different rotor inclination angles of the robot, the width of the fixed rotor plate and the different near-ground distances, affect the traction of the robot. The robot motion performance and adaptability under different ground/wall environments are analyzed, by conducting the robot climbing experiment under a small slope, a vertical wooden wall surface and a vertical indoor wall surface. Stable adsorption and optimization tests are also performed. Moreover, the stability of the robot’s motion is verified. Finally, a theoretical and experimental accumulation is laid for the realization of the smooth transition of the robot from the ground to the wall.

Los estilos APA, Harvard, Vancouver, ISO, etc.

26

Zieliński, Jan. "Ekfraza jako pytanie o prawo do zachwytu". Colloquia Litteraria 16, n.º 1 (19 de noviembre de 2014): 29. http://dx.doi.org/10.21697/cl.2014.1.02.

Texto completo

Resumen

Ekphrasis as a question about the right to enchantment The author discusses Fr. Janusz S. Pasierb’s poem spotkanie [meeting] from Zdejmowanie pieczęci [Removing the seal] volume (Warsaw, 1982). He treats the poem as an example of a double ekphrasis – a simultaneous reference to two works of art; one of them is Auguste Ottin’s large sculpture Polyphème surprenant Galatée dans les bras d’Acis (1866) composed into Marie de’ Medici’s fountain in Parisian Jardin du Luxembourg, the other Giovanni Lafranco’s painting Lucina e Norandino sorpresi dall’Orco (c. 1624) from the Borghese Gallery in Rome. The analysis, which evokes mythological, literary (Ariosto, Proust) and iconographical (Redon) contexts, leads to a conclusion about art’s mediating role; about art as ground that allows for enchantment over otherwise inaccessible forms of beauty.

Los estilos APA, Harvard, Vancouver, ISO, etc.

27

Ji, Jing, Miao Yu, Xin An y Yun He Zhang. "The Study on the Communication of the Double-Robot Polishing System by the C/S Mode". Advanced Materials Research 524-527 (mayo de 2012): 3778–81. http://dx.doi.org/10.4028/www.scientific.net/amr.524-527.3778.

Texto completo

Resumen

This paper compiles the program to control the double- robot polishing system remotely by the interface-socket of the network programming in the VC++6.0 language environment and realizes the application of the dual- robot system network. It adopts TCP/IP protocol as the communication protocol between the serial robots by the C/S mode of dual robot polishing system. The mode of the hand shake is carried out for the polishing experiments between the arm of two serial robots and communication of the binocular camera successfully. The experiment shows that the communication protocol can enforce communication of the computer between the dual-robot. It can achieve the stablity and higher instantaneity. It has met the communication needs of the double- robot.

Los estilos APA, Harvard, Vancouver, ISO, etc.

28

Wang, Bo y Xing Guang Qi. "Active Visual Method for Mobile Robots Localization using Double Freedom Pan-Title". Applied Mechanics and Materials 336-338 (julio de 2013): 1053–58. http://dx.doi.org/10.4028/www.scientific.net/amm.336-338.1053.

Texto completo

Resumen

For a monocular camera-based mobile robot system,we propose the active visual method for robot localization,based on the double freedom pan-tilt.First,the kinematic model of the mobile robot system of monocular vision is given.Secondly,by controlling the pitch and yaw angles of pan-tilt,the camera optical axis always points to the target geometry center in order to solve the field of view problem.Coordinate system relative pose solution method which based on dual quaternion avoids calculating the singularity and improves the positioning accuracy of mobile robots.Finally,according to pan-tilts feedback angles,extrinsic parameters of the camera,the pose and the position of the camera,the position vector and pose vector of the mobile robot are obtained.

Los estilos APA, Harvard, Vancouver, ISO, etc.

29

Fournier, G., M. A. Perrouin Verbe, G. Papin y M. Thoulouzan. "Implantation de sphincter artificiel périprostatique AMS 800 chez l’homme par cœlioscopie assistée du Robot Da Vinci HD Si 4 bras". Progrès en Urologie 23, n.º 13 (noviembre de 2013): 1138. http://dx.doi.org/10.1016/j.purol.2013.08.279.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

30

Roy, Benoît y Louis Barbeau. "Facteurs d'efficacité dans certaines techniques classiques en ski de fond : le pas de un et la poussée simultanée". STAPS 12, n.º 25 (1991): 37–43. http://dx.doi.org/10.3406/staps.1991.1219.

Texto completo

Resumen

Le but de cette étude était d'identifier un certain nombre de facteurs associés à l'accroissement de la vitesse au pas de un et à la poussée simultanée. Des skieurs d'élite (N = 8) furent sélectionnés à cette fin. Des mesures de fréquence et longueur d'enjambée, de distance parcourue pendant certaines phases, de durée des phases, de même que des mesures angulaires furent obtenues à l'aide de la cinématographie. Pour ces deux techniques, l'accroissement de la vitesse repose presque exclusivement sur la modification de la cadence propulsive. Au pas de un les deux tiers du déplacement surviennent dans la phase de propulsion des bras et du glissement qui s'ensuit. Quant à la double poussée près des trois quarts du déplacement surviennent dans la phase de glissement qui suit la phase propulsive.

Los estilos APA, Harvard, Vancouver, ISO, etc.

31

Cree, Christopher, Emily Carter, Heng Wang, Changki Mo y John Miller. "Tracking Robot Location for Non-Destructive Evaluation of Double-Shell Tanks". Applied Sciences 10, n.º 20 (19 de octubre de 2020): 7318. http://dx.doi.org/10.3390/app10207318.

Texto completo

Resumen

(1) Background: Non-destructive evaluation of double-shell nuclear-waste storage tanks at the U.S. Department of Energy’s Hanford site requires a robot to navigate a network of air slots in the confined space between primary and secondary tanks. Situational awareness, data collection, and data interpretation require continuous tracking of the robot’s location. (2) Methods: Robot location is continuously monitored using video image analysis for short distances and laser ranging for absolute location. (3) Results: The technique was demonstrated in our laboratory using a mockup of air slot and robot. (4) Conclusions: Location tracking and display provide decision support to inspectors and lay the groundwork for automated data collection.

Los estilos APA, Harvard, Vancouver, ISO, etc.

32

Vazhapilli Sureshbabu, A., N. M. Martins Pacheco, L. I. Duran Noy y M. Zimmermann. "Design of an Autonomous Trash-Picking Service Robot Focussed on Human-Robot Interaction". Proceedings of the Design Society 2 (mayo de 2022): 2523–32. http://dx.doi.org/10.1017/pds.2022.255.

Texto completo

Resumen

AbstractThe design of service robots is typically treated as a mechatronic design problem aimed at implementation of its core technical functionalities. Intuitive operation and usability are ignored. We developed a trash-picking service robot with a strong focus on human-robot interaction (HRI) using the double diamond framework. The HRI-focussed hardware features were successfully implemented and tested. The results were shown to satisfy the ease of operation and usability requirements set as development goals for the robot.

Los estilos APA, Harvard, Vancouver, ISO, etc.

33

Somolinos, Jose Andrés, Rafael Morales, Carlos Morón y Alfonso Garcia. "Using the Own Flexibility of a Climbing Robot as a Double Force Sensor". Key Engineering Materials 495 (noviembre de 2011): 91–95. http://dx.doi.org/10.4028/www.scientific.net/kem.495.91.

Texto completo

Resumen

Force sensors are used when interaction tasks are carried out by robots in general, and by climbing robots in particular. If the mechanics and electronics systems are contained inside the own robot, the robot becomes portable without external control. Commercial force sensors cannot be used due to limited space and weight. By selecting the links material with appropriate stiffness and placing strain gauges on the structure, the own robot flexibility can be used such as force sensor. Thus, forces applied on the robot tip can be measured without additional external devices. Only gauges and small internal electronic converters are necessary. This paper illustrates the proposed algorithm to achieve these measurements. Additionally, experimental results are presented.

Los estilos APA, Harvard, Vancouver, ISO, etc.

34

Mohammad Reza, Bahrami. "Mechanics of Electrical Transmission Line Robot Inspector: Pendulum as a Dynamic Vibration Absorber". E3S Web of Conferences 162 (2020): 03004. http://dx.doi.org/10.1051/e3sconf/202016203004.

Texto completo

Resumen

The purpose of this article is to design a new dynamic vibration absorber (DVA) and create a mathematical model to analyze the electrical transmission lines inspection robot movement on the line. First, the vibration of the electrical line while the robot inspector moves along it has been modeled considering the conductor as a stretched string and the robot as a moving load. It follows by using a double pendulum as the dynamic vibration absorber. To better understanding the performance of the DVA, the results are compared with the model in which a robot inspector is considered as a pendulum with a suspension base (here the conductor). This example shows the possibility of usage of the double pendulum as the DVA in electrical transmission inspection robots.

Los estilos APA, Harvard, Vancouver, ISO, etc.

35

Tchoń, Krzysztof y Janusz Jakubiak. "Motion planning of the double-link trident snake robot". IFAC Proceedings Volumes 45, n.º 22 (2012): 337–42. http://dx.doi.org/10.3182/20120905-3-hr-2030.00051.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

36

LI, Tian-Cheng y Shu-Dong SUN. "Double-resampling Based Monte Carlo Localization for Mobile Robot". Acta Automatica Sinica 36, n.º 9 (21 de diciembre de 2010): 1279–86. http://dx.doi.org/10.3724/sp.j.1004.2010.01279.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

37

Margaritescu, Mihai, Ana Maria Eulampia Ivan, Vlad Vaduva y Cornel Brisan. "Extended Mobility Carried Out with a Double Hexapod Robot". Solid State Phenomena 166-167 (septiembre de 2010): 271–76. http://dx.doi.org/10.4028/www.scientific.net/ssp.166-167.271.

Texto completo

Resumen

The double hexapod robot consists in two staged hexapod platforms – Stewart Gough platforms - combining in a certain measure the advantages of the robots with parallel kinematics and of the serial robots: high accuracy, high stiffness, fast response and small dimensions, having an extended operating space. Different modelling and construction aspects were described in few previous articles. Some examples of trajectories generated with this positioning system are now presented to illustrate its mobility, as well as the workspaces for one and two hexapods in order to make possible a visual comparison between the two volumes.

Los estilos APA, Harvard, Vancouver, ISO, etc.

38

Wang, Xuewu, Bin Tang, Xin Zhou y Xingsheng Gu. "Double-robot obstacle avoidance path optimization for welding process". Mathematical Biosciences and Engineering 16, n.º 5 (2019): 5697–708. http://dx.doi.org/10.3934/mbe.2019284.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

39

MINAMI, Yuki y Ryuta NAMIKAWA. "Feedback Control Experiment of Double-Linked Trident Snake Robot". TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C 79, n.º 804 (2013): 2864–68. http://dx.doi.org/10.1299/kikaic.79.2864.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

40

Gao, Xueshan, Kejie Li y Junyao Gao. "A Mobile Robot Platform with Double Angle-Changeable Tracks". Advanced Robotics 23, n.º 9 (enero de 2009): 1085–102. http://dx.doi.org/10.1163/156855309x452548.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

41

Dachlika, Tal y David Zarrouk. "Mechanics of locomotion of a double screw crawling robot". Mechanism and Machine Theory 153 (noviembre de 2020): 104010. http://dx.doi.org/10.1016/j.mechmachtheory.2020.104010.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

42

Liu, Qingyou, Jianguo Zhao, Haiyan Zhu, Wei Zheng y Yaqiang Yang. "A Novel Double Bevel Support Structure for Downhole Robot". Arabian Journal for Science and Engineering 44, n.º 2 (2 de julio de 2018): 1069–79. http://dx.doi.org/10.1007/s13369-018-3316-x.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

43

Wang, Xiaojian, Jun Wu y Yulin Zhou. "Dynamic Modeling and Performance Evaluation of a 5-DOF Hybrid Robot for Composite Material Machining". Machines 11, n.º 6 (16 de junio de 2023): 652. http://dx.doi.org/10.3390/machines11060652.

Texto completo

Resumen

Dynamic performance is an important performance of robots used for machine processing. This paper studies the dynamic modeling and evaluation method of a 5-DOF (Degree of Freedom) hybrid robot used in aerospace composite material processing. With the consideration of the dynamics of the serial part, the complete dynamic model of the hybrid robot is established based on the virtual work principle. In addition to the widely considered acceleration term, a dynamic performance evaluation index that comprehensively considers the acceleration term, velocity term and gravity term in the dynamic model is proposed. Using the dynamic performance index, the effect of the placement direction of the robot and the arrangement of the double symmetric limbs on robot dynamics are investigated. The results indicate that the vertical placement is beneficial to the dynamics of the hybrid robot, and the arrangement of double symmetric limbs has different effects on different limbs.

Los estilos APA, Harvard, Vancouver, ISO, etc.

44

Watanabe, Takahiro, Hidehiko Yamamoto y Takayoshi Yamada. "Selection System of Robot type for cell assembly production (Production efficiency comparison of single arm robot and double arm robot)". Proceedings of International Conference on Artificial Life and Robotics 25 (13 de enero de 2020): 456–60. http://dx.doi.org/10.5954/icarob.2020.gs4-3.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

45

Liu, Zhifan, Wu Wei, Xiongding Liu y Siwei Han. "Target Tracking of Snake Robot with Double-Sine Serpentine Gait Based on Adaptive Sliding Mode Control". Actuators 12, n.º 1 (10 de enero de 2023): 38. http://dx.doi.org/10.3390/act12010038.

Texto completo

Resumen

This paper studies the target tracking control strategy of a snake robot and proposes an adaptive sliding mode control method. The strategy ensures the robot follows the target path by controlling the joint angle through feedback, pushing the robot to reach the target position through gait function. In order to achieve target tracking, a kinematic model of a snake robot was first established in this paper. Then, we used double-sine serpentine gait to solve the problem of low steering efficiency caused by regular serpentine gait, and we explored the relationship between control parameters and robot steering. On the basis of gait, in order to further improve the efficiency of target tracking for the snake robot, an adaptive sliding mode control method, based on a new sliding mode reaching law, was proposed. Finally, the effectiveness and practicability of the proposed strategy was demonstrated by comparative analysis and simulation experiments.

Los estilos APA, Harvard, Vancouver, ISO, etc.

46

Bučinskas, Vytautas, Andrius Klevinskis, Peter Mitrouchev y Robertas Urbanavičius. "Implementation of a Controllable Damper for Suppressing Vibration in the Technological Process". Solid State Phenomena 220-221 (enero de 2015): 136–43. http://dx.doi.org/10.4028/www.scientific.net/ssp.220-221.136.

Texto completo

Resumen

The paper deals with the problem of suppressing vibration of the arm of Motoman SSF200 robot within the frame of the technological process. Based on an overview of literature, a semi-active vibration control system was selected and a double ended magnetorheological damper (MR) was designed. After testing the acceleration of the robot arm in milling operation without the MR damper, the device was employed and the acceleration of the robot arm in four operation modes was experimentally tested.The conducted research has proved that the double ended MR damper can be practically applied for suppressing the vibration of the robot arm. The higher power to the electromagnet of the MR damper is exposed, the better vibration suppression is. This means that by changing the strength of current, the technological process of the robot arm is under control. Thus, control over the technological process is simplified when the physical characteristics of the milled material, milled tool or operation vary.

Los estilos APA, Harvard, Vancouver, ISO, etc.

47

Putri, Farika Tono, Ragil Tri Indrawati, Eni Safriana, Wahyu Isti Nugroho, Timotius Anggit Kristiawan y Rizkha Ajeng Rochmatika. "Mathematical and 3D Mechanical System Simulation of Arm Robot Modelled as Double Pendulum". Jurnal Rekayasa Mesin 18, n.º 3 (22 de diciembre de 2023): 495. http://dx.doi.org/10.32497/jrm.v18i3.5110.

Texto completo

Resumen

<p>Lengan robot telah banyak digunakan dan penelitian ekstensif terkait manipulator telah dilakukan. Permasalahan pada manipulator robot lengan adalah pengendalian dan stabilisasinya. Pemodelan matematis dapat membantu mengendalikan lengan robot dengan parameter yang mudah untuk ditentukan. Penelitian ini bertujuan untuk membandingkan simulasi pemodelan matematis dan simulasi sistem mekanik 3D manipulator yang dimodelkan dengan pendulum ganda. Simulasi dilakukan dengan bantuan MATLAB/Simulink dan MATLAB/Simscape Multibody. Metode penelitian meliputi: (i) Pembentukan persamaan Lagrange untuk manipulator, (ii) Membuat blok MATLAB/Simulink, (iii) Membuat blok MATLAB/Simscape Multibody, (iv) Mendefinisikan parameter matematis dan fisika dan (v) Menjalankan simulasi dan menganalisis hasil. Hasil dari penelitian ini menunjukkan simulasi matematis lengan robot berdasarkan persamaan Lagrange konsisten dalam bentuk gelombang sinus. Sedangkan untuk simulasi 3D hasil grafiknya tidak konsisten. Namun pada hasil simulasi 3D yang parameter lengan robotnya hampir sama, hasilnya menunjukkan tren tertutup.</p>

Los estilos APA, Harvard, Vancouver, ISO, etc.

48

Xu, Ying, Lei Yuan y Jin Tan Duan. "Design and Realization of the Mobile Robot with Caterpillar Double Accused for Extinguishing". Applied Mechanics and Materials 184-185 (junio de 2012): 1542–45. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.1542.

Texto completo

Resumen

In this paper, two kinds modes of the mobile robot made fire caterpillar method are presented, manual control and automatic control,can this not only make it have the performance of the movement in cross-country, but also realize the early warning and effective extinguishing the fire by carrying the flame using sensors and connecting rod type fire extinguishing actuators.This paper introduce the robot structure design, fire extinguishing actuators, control system design, operation analysis and the realization of two-way control mode , provide the reference for minitype ground mobile robot and the related technology research.

Los estilos APA, Harvard, Vancouver, ISO, etc.

49

Cornu, Claude. "Le moulin d’Andé, une thébaïde normande pour les cinéastes". Études Normandes 16, n.º 1 (2020): 34–37. http://dx.doi.org/10.3406/etnor.2020.3659.

Texto completo

Resumen

Situé sur un bras de la Seine, au coeur d’un parc de 15ha, entre Rouen et Les Andelys, le moulin d’Andé est à double titre un lieu historique. Si le bâtiment actuel à pans de bois, classé Monument historique, date du XVe siècle, c’est dès 1195 qu’un moulin a été édifié à cet endroit pour approvisionner en farine la garnison du Château-Gaillard. Mais le site est riche également d’une histoire vivante. Depuis plus de soixante ans, Suzanne Lipinska, la propriétaire et l’âme du lieu, accueille artistes et créateurs de toutes disciplines, qui peuvent y travailler à loisir. Les cinéastes, en particulier, ont été et sont nombreux à fréquenter le moulin, réalisateurs venus, à la suite de François Truffaut, préparer voire tourner leurs films, ou talents en herbe reçus en stage pour parfaire leur projet sous la conduite de professionnels.

Los estilos APA, Harvard, Vancouver, ISO, etc.

50

Li, Hong Jun, Wei Jiang, Yu Yan, An Zhang y Gan Zuo. "Operation Motion Planning and Principle Prototype Design of Four-Wheel-Driven Mobile Robot for High-Voltage Double-Split Transmission Lines". Mathematical Problems in Engineering 2020 (19 de marzo de 2020): 1–17. http://dx.doi.org/10.1155/2020/6195320.

Texto completo

Resumen

In response to the problems of high labor intensity, high risk, and poor reliability of artificial live working, a four-wheel-driven spacer bar replacement mobile operation robot has been designed and developed in this paper, and the corresponding kinematic and dynamics model have been established, based on the established double models, the kinematics and dynamics numerical analysis can be realized through INVENTOR and ADAMS, respectively, based on the established kinematics and dynamics models . The results show that the simulation value of the robot joint displacement, velocity, acceleration, and joint force can be able to meet the requirements of kinematic and dynamic constraints during the robot operation. The robot prototype can meet the requirement of dual-split robot working space and the operation joint force control, which not only extend the robot adaptability to the multisplit lines heterogeneous operation environment but also provide an important theoretical technical support for the exploit of the robot physical prototype. Through the robot kinematics and dynamics analysis, the robot mechanical structure parameters and electrical control parameters have been effectively optimized. The weight and cost of the robot have been reduced by 12% and 15% compared to the existed studies. Finally, the robot principle prototype mobile platform has been developed, and the correctness of robot kinematics and dynamics simulation analysis has been verified through the robot principle prototype mobile platform.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!