Libros sobre el tema "Procedural simulation"

Sanders, William. Digital procedural skill retention for selected M1A2 Tank Inter-Vehicular Information System (IVIS) tasks. Alexandria, Va: U.S. Army Research Institute for the Behavioral and Social Sciences, 1999.

VanLehn, Kurt. Mind bugs: The origins of procedural misconceptions. Cambridge, Mass: MIT Press, 1990.

Schrag, Philip G. Civil procedure: A simulation supplement. Boston: Little, Brown, 1990.

Jin-Chern, Chiou, Downer Janice Diane y United States. National Aeronautics and Space Administration., eds. Staggered solution procedures for multibody dynamics simulation. Boulder, Colo: Center for Space Structures and Controls, College of Engineering, University of Colorado, 1990.

C, Chiou J., Downer J. D y United States. National Aeronautics and Space Administration., eds. Staggered solution procedures for multibody dynamics simulation. Boulder, Colo: Center for Space Structures and Controls, College of Engineering, University of Colorado, 1990.

Dasgupta, Prokar, Kamran Ahmed, Peter Jaye y Mohammed Shamim Khan. Surgical simulation. London: Anthem Press, 2013.

M, Meinert Karen y Langley Research Center, eds. Numerical propulsion system simulation, software standards & procedures, specification. [Hampton, Va.]: National Aeronautics and Space Administration, Langley Research Center, 1997.

Canada, Statistics. Smoothing procedures for simulated longitudinal microdata. [Ottawa, Ont.]: Statistics Canada, 1990.

Erkelens, L. J. J. Flight simulator evaluation of advanced MLS procedures. Amsterdam: National Aerospace Laboratory, 1991.

D, Callero Monti, United States. Defense Advanced Research Projects Agency. y National Defense Research Institute (U.S.), eds. Enhancing weapon system analysis: Issues and procedures for integrating a research and development simulator with a distributed simulation network. Santa Monica, CA: Rand, 1994.

Verrill, S. P. Statistical framework for comparing lumber sorting procedures. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2009.

Leake, S. A. Procedures and computer programs for telescopic mesh refinement using MODFLOW. Tucson, Ariz: U.S. Dept. of the Interior, U.S. Geological Survey, 1999.

V, Claar David, St. Johns River Water Management District (Fla.) y Geological Survey (U.S.), eds. Procedures and computer programs for telescopic mesh refinement using MODFLOW. Tucson, Ariz: U.S. Dept. of the Interior, U.S. Geological Survey, 1999.

Schreuder, Hans T. Model-dependent and design-dependent sampling procedures: A simulation study. Fort Collins, Colo. (240 W. Prospect Rd., Fort Collins 80526): U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station, 1990.

Schreuder, Hans T. Model-dependent and design-dependent sampling procedures: A simulation study. Fort Collins, Colo. (240 W. Prospect Rd., Fort Collins 80526): U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station, 1990.

Schreuder, Hans T. Model-dependent and design-dependent sampling procedures: A simulation study. Fort Collins, Colo. (240 W. Prospect Rd., Fort Collins 80526): U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station, 1990.

Simon, Judith C. Systems and procedures for the modern office: A simulation approach. 2^a ed. Englewood Cliffs, N.J: Regents/Prentice Hall, 1993.

Schreuder, Hans T. Model-dependent and design-dependent sampling procedures: A simulation study. Fort Collins, Colo: U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station, 1990.

Schreuder, Hans T. Model-dependent and design-dependent sampling procedures: A simulation study. Fort Collins, Colo. (240 W. Prospect Rd., Fort Collins 80526): U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station, 1990.

Schreuder, Hans T. Model-dependent and design-dependent sampling procedures: A simulation study. Fort Collins, Colo. (240 W. Prospect Rd., Fort Collins 80526): U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station, 1990.

Steiger, John C. Juvenile sentencing guidelines simulation: Documentation. [Olympia, WA]: Office of Financial Management, 1998.

Evangeliou, N. Simulating statistical quality control procedures for handling attribute data. Manchester: UMIST, 1996.

Alterovitz, Ron. Motion planning in medicine: Optimization and simulation algorithms for image-guided procedures. Berlin: Springer, 2008.

Alterovitz, Ron. Motion planning in medicine: Optimization and simulation algorithms for image-guided procedures. Berlin: Springer, 2008.

Taylor, Judy L. Stellar Cable Co.: Computerized billing procedures. 2^a ed. Cincinnati: South-Western Pub. Co., 1990.

Jerry, Wachtel y U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Licensee Performance and Quality Evaluation, eds. Evaluation procedure for simulation facilities certified under 10 CFR 55: Final report. Washington, DC: Division of Licensee Performance and Quality Evaluation, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1987.

Jerry, Wachtel y U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Licensee Performance and Quality Evaluation., eds. Evaluation procedure for simulation facilities certified under 10 CFR 55: Final report. Washington, DC: Division of Licensee Performance and Quality Evaluation, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1987.

Cute, Giuseppe La. La simulazione di reato. Napoli: Jovene, 1986.

J, Nelson Eric, Indiana. Dept. of Transportation. y Joint Transportation Research Program (Ind.), eds. Development of closed loop system evaluation procedures. West Lafayette, Ind: Joint Highway Research Program, Purdue University, 2000.

Leonard, Tobias y United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Simulation studies of time-control procedures for the Advanced Air Traffic Control system. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Wood, P. K. C. Strain rate testing of metallic materials and their modelling for use in CAE based automotive crash simulation tools: (recommendations and procedures. Shrewsbury, Shropshire: iSmithers, 2009.

Park, Brian. Development and evaluation of a calibration and validation procedure for microscopic simulation models. Charlottesville, Va: Virginia Transportation Research Council, 2004.

Sargent, Robert G. An investigation of finite sample behavior of confidence interval estimation procedures in computer simulation. Monterey, Calif: Naval Postgraduate School, 1991.

European Workshop on Parallel Processing Techniques for Simulation (1st 1985 University of Manchester Institute of Science and Technology). Parallel processing techniques for simulation. New York: Plenum Press, 1986.

M, Arnež Z., ed. Simulations in biomedicine V. Southampton: WIT Press, 2003.

Gerhardt, Jürgen. Numerische Simulation dreidimensionaler Umformvorgänge mit Einbezug des Temperaturverhaltens. Berlin: Springer, 1989.

O'Kelly, Peter. Computer Simulation of Thermal Plant Operations. New York, NY: Springer New York, 2013.

Nicholas, Ayache y Delingette Hervé, eds. Surgery simulation and soft tissue modeling. Berlin: Springer, 2003.

Judkoff, Ron. Building Energy Simulation Test for Existing Homes (BESTEST-EX): Test procedure : building thermal fabric cases. Golden, CO: National Renewable Energy Laboratory, 2010.

Hay, Julie. Simulations for assessment, training, and development. Amherst, Mass: HRD Press, 2008.

Wheeler, Russell L. Evaluating coinciding anomalies along a fault trace or other traverse--simulations and statistical procedures. Washington: Dept. of the Interior, U.S. Geological Survey, 1987.

Wheeler, Russell L. Evaluating coinciding anomalies along a fault trace or other traverse--simulations and statistical procedures. Washington, DC: U.S. Geological Survey, 1987.

United States. National Aeronautics and Space Administration., ed. Final report for two XTE A01 projects: A multifrequency study of Circinus X-1 and A search for microsecond variability from bright galactic X-ray source. [Washington, DC: National Aeronautics and Space Administration, 1998.

Bedrosian, Edward. Concept-level analytical procedures for loading nonprocessing communication satellites with nonantijam signals. Santa Monica, CA: Rand, 1996.

A, Sorensen John, United States. Federal Aviation Administration. Program Engineering & Maintenance Service y Ames Research Center, eds. Evaluation of the usefulness of various simulation technology options for terminal instrument procedures (TERPS) enhancement: Final report. Washington, D.C: U.S. Dept. of Transportation, Federal Aviation Administration, Program Engineering and Maintenance Service, 1986.

Taylor, Cynthia. Algorithm design, user interface, and optimization procedure for a fuzzy logic ramp metering algorithm: A training manual for freeway operations engineers. [Olympia, Wash.]: Washington State Dept. of Transportation, 2000.

Costas, Synolakis y Pacific Marine Environmental Laboratory (U.S.), eds. Standards, criteria, and procedures for NOAA evaluation of tsunami numerical models. Seattle, WA: U.S. Dept. of Commerce, National Oceanic and Atmospheric Administration, Office of Oceanic and Atmospheric Research, Pacific Marine Environmental Laboratory, 2007.

Carr, Peter C. Analysis procedures and subjective flights results of a simulator validation and cue fidelity experiment. Edwards, Calif: National Aeronautics and Space Administration, Ames Research Center, Dryden Flight Research Facility, 1988.

International Benchmark Sites Network for Agrotechnology Transfer., ed. Experimental design and data collection procedures for IBSNAT: The minimum data set for systems analysis and crop simulation. 3^a ed. [Hawaii]: IBSNAT, 1988.

R, Gore B., U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Systems Technology. y Pacific Northwest Laboratory, eds. A limited assessment of the ASEP human reliability analysis procedure using simulator examination results. Washington, DC: Division of Systems Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1995.