Artículos de revistas: "PROBA-3 space mission"

1

Vivès, S., P. Lamy, S. Koutchmy y J. Arnaud. "ASPIICS, a giant externally occulted coronagraph for the PROBA-3 formation flying mission". Advances in Space Research 43, n.º 6 (marzo de 2009): 1007–12. http://dx.doi.org/10.1016/j.asr.2008.10.026.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Shestov, S. V., A. N. Zhukov, B. Inhester, L. Dolla y M. Mierla. "Expected performances of the PROBA-3/ASPIICS solar coronagraph: Simulated data". Astronomy & Astrophysics 652 (30 de julio de 2021): A4. http://dx.doi.org/10.1051/0004-6361/202140467.

Texto completo

Resumen

Context. The Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun (ASPIICS) is a novel externally occulted solar coronagraph that will be launched on board the Project for On-Board Autonomy (PROBA-3) mission in 2023. The external occulter will be placed on the first satellite ∼150 m ahead of the second satellite, which will carry an optical instrument. During 6 hours per orbit, the satellites will fly in a precise formation and will constitute a giant externally occulted coronagraph. The large distance between the external occulter and the primary objective will allow observations of the white-light solar corona starting from extremely low heights of ∼1.1 R⊙. Aims. Developing and testing of algorithms for the scientific image processing requires understanding of all the optics-related and detector-related effects of the coronagraph, development of appropriate physical and numerical models, and preparation of simulated images that include all these effects. At the same time, an analysis of the simulated data gives valuable information about the performance of the instrument, the suitable observation regime, and the amount of telemetry. Methods. We used available physical models of the instrument and implemented them as a software to generate simulated data. We analyzed intermediate and complete simulated images to obtain a better understanding of the performance of ASPIICS, in particular, to predict its photometric sensitivity, effect of noise, suitable exposure times, etc. Results. The proposed models and algorithms are used not only to create the simulated data, but also to form the basis for the scientific processing algorithms to be applied during on-ground ASPIICS data processing. We discuss the possible effect of noise and the uncertainty of the calibration factors on the accuracy of final data, and propose suitable exposure times.

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Shestov, S. V., A. N. Zhukov y D. B. Seaton. "Modeling and removal of optical ghosts in the PROBA-3/ASPIICS externally occulted solar coronagraph". Astronomy & Astrophysics 622 (febrero de 2019): A101. http://dx.doi.org/10.1051/0004-6361/201834584.

Texto completo

Resumen

Context. ASPIICS is a novel externally occulted solar coronagraph, which will be launched onboard the PROBA-3 mission of the European Space Agency. The external occulter will be placed on the first satellite ∼150 m ahead of the second satellite that will carry an optical instrument. For 6 h per orbit, the satellites will fly in a precise formation, constituting a giant externally occulted coronagraph. The large distance between the external occulter and the primary objective will allow observations of the white-light solar corona starting from extremely low heights ∼1.1 R⊙. Aims. We aim to analyze the possible influence of optical ghost images formed inside the telescope and to develop an algorithm for their removal. Methods. We implement the optical layout of ASPIICS in Zemax and study the ghost behavior in sequential and nonsequential regimes. We identify sources of the ghost contributions and analyze their geometrical behavior. Finally we develop a mathematical model and software to calculate ghost images for any given input image. Results. We show that ghost light can be important in the outer part of the field of view, where the coronal signal is weak, since the energy of bright inner corona is redistributed to the outer corona. However, the model allows for the ghost contribution to be removed. Due to the large distance between the external occulter and the primary objective, the primary objective does not produce a significant ghost. The use of the Lyot spot in ASPIICS is not necessary.

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Aime, C. "Fresnel diffraction of multiple disks on axis". Astronomy & Astrophysics 637 (mayo de 2020): A16. http://dx.doi.org/10.1051/0004-6361/201937208.

Texto completo

Resumen

Aims. We seek to study the Fresnel diffraction of external occulters that differ from a single mask in a plane. Such occulters have been used in previous space missions and are planned for the future ESA Proba 3 ASPIICS coronagraph. Methods. We studied the shading efficiency of double on-axis disks and generalized results to a 3D occulter. We used standard Fourier optics in an analytical approach. We show that the Fresnel diffraction of two and three disks on axis can be expressed using a Babinet-like approach. Results are obtained in the form of convolution integrals that can be written as Bessel-Hankel integrals; these are difficult to compute numerically for large Fresnel numbers found in solar coronagraphy. Results. We show that the shading efficiency of two disks is well characterized by the intensity of the residual Arago spot, a quantity that is easier to compute and therefore allows an interesting parametric study. Very simple conditions are derived for optimal sizes and positions of two disks to produce the darkest structure around the Arago spot. These conditions are inspired from empirical experiments performed in the sixties. A differential equation is established to give the optimal envelope for a multiple-disk occulter. The solution takes the form of a simple law, the approximation of which is a conical occulter, a shape already used in the SOHO Mission. Conclusions. In addition to quantifying expected results, the present study highlights unfortunate configurations of disks and spurious diffractions that may increase the stray light. Particular attention is paid to the possible issues of the future occulter spacecraft of ASPIICS.

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Shestov, S. V. y A. N. Zhukov. "Influence of misalignments on the performance of externally occulted solar coronagraphs". Astronomy & Astrophysics 612 (abril de 2018): A82. http://dx.doi.org/10.1051/0004-6361/201732386.

Texto completo

Resumen

Context. The ASPIICS instrument is a novel externally occulted coronagraph that will be launched on board the PROBA-3 mission of the European Space Agency. The external occulter will be placed on one satellite ~150 m ahead of the second satellite that will carry an optical instrument. During 6 h out of 19.38 h of orbit, the satellites will fly in a precise (accuracy around a few millimeters) formation, constituting a giant externally occulted coronagraph. The large distance between the external occulter and the primary objective will allow observations of the white-light solar corona starting from extremely low heights ~ 1.1R⊙. Aims. We intend to analyze influence of shifts of the satellites and misalignments of optical elements on the ASPIICS performance in terms of diffracted light. Based on the quantitative influence of misalignments on diffracted light, we provide a recipe for choosing the size of the internal occulter (IO) to achieve a trade-off between the minimal height of observations and sustainability to possible misalignments. Methods. We considered different types of misalignments and analyzed their influence from optical and computational points of view. We implemented a numerical model of the diffracted light and its propagation through the optical system and computed intensities of diffracted light throughout the instrument. Our numerical approach is based on a model from the literature that considered the axisymmetrical case. Here we extend the model to include nonsymmetrical cases and possible misalignments. Results. The numerical computations fully confirm the main properties of the diffracted light that we obtained from semi-analytical consideration. We obtain that relative influences of various misalignments are significantly different. We show that the internal occulter with RIO = 1.694 mm = 1.1R⊙ is large enough to compensate possible misalignments expected to occur in PROBA-3/ASPIICS. Besides that we show that apodizing the edge of the internal occulter leads to additional suppression of the diffracted light. Conclusions. We conclude that the most important misalignment is the tilt of the telescope with respect to the line connecting the center of the external occulter and the entrance aperture. Special care should be taken to co-align the external occulter and the coronagraph, which means co-aligning the diffraction fringe from the external occulter and the internal occulter. We suggest that the best orientation strategy is to point the coronagraph to the center of the external occulter.

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Rougeot, R., R. Flamary, D. Mary y C. Aime. "Influence of surface roughness on diffraction in the externally occulted Lyot solar coronagraph". Astronomy & Astrophysics 626 (junio de 2019): A1. http://dx.doi.org/10.1051/0004-6361/201834634.

Texto completo

Resumen

Context. The solar coronagraph ASPIICS will fly on the future ESA formation flying mission Proba-3. The instrument combines an external occulter of diameter 1.42 m and a Lyot solar coronagraph of 5 cm diameter, located downstream at a distance of 144 m. Aims. The theoretical performance of the externally occulted Lyot coronagraph has been computed by assuming perfect optics. In this paper, we improve related modelling by introducing roughness scattering effects from the telescope. We have computed the diffraction at the detector, that we compare to the ideal case without perturbation to estimate the performance degradation. We have also investigated the influence of sizing the internal occulter and the Lyot stop, and we performed a sensitivity analysis on the roughness. Methods. We have built on a recently published numerical model of diffraction propagation. The micro-structures of the telescope are built by filtering a white noise with a power spectral density following an isotropic ABC function, suggested by Harvey scatter theory. The parameters were tuned to fit experimental data measured on ASPIICS lenses. The computed wave front error was included in the Fresnel wave propagation of the coronagraph. A circular integration over the solar disk was performed to reconstruct the complete diffraction intensity. Results. The level of micro-roughness is 1.92 nm root-mean-square. Compared to the ideal case, in the plane of the internal occulter, the diffraction peak intensity is reduced by ≃0.001%. However, the intensity outside the peak increases by 12% on average, up to 20% at 3 R⊙, where the mask does not filter out the diffraction. At detector level, the diffraction peak remains ≃10−6 at 1.1 R⊙, similar to the ideal case, but the diffraction tail at large solar radius is much higher, up to one order of magnitude. Sizing the internal occulter and the Lyot stop does not improve the rejection, as opposed to the ideal case. Conclusions. Besides these results, this paper provides a methodology to implement roughness scattering in the wave propagation model for the solar coronagraph.

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Rougeot, R. y C. Aime. "Theoretical performance of serrated external occulters for solar coronagraphy". Astronomy & Astrophysics 612 (abril de 2018): A80. http://dx.doi.org/10.1051/0004-6361/201732512.

Texto completo

Resumen

Context. This study is made in the context of the future solar coronagraph ASPIICS of the ESA formation-flying mission Proba-3. Aims. In the context of solar coronagraphy, we provide a comparative study of the theoretical performance of serrated (or toothed) external occulters by varying the number and size of the teeth, which we compare to the sharp-edged and apodized disks. The tooth height is small (a few centimeters), to avoid hindering the observation of the solar corona near the limb. We first analyze the diffraction pattern produced by such occulters. In a second step, we compute the umbra profile by integration over the Sun. Methods. We explored a few methods to compute the diffraction pattern. Two of them were implemented. The first is based on 2D fast Fourier transformation (FFT) routines and a multiplication by the Fresnel filter of the form exp(−iπλzu2). Simple rules were derived and discussed to set the sampling conditions. The Maggi–Rubinowicz representation is then proposed as an alternative method, and is proven to be very efficient for this study. Results. Serrated occulters tend to create a two-level intensity pattern, the inner being the darker, which perfectly matches a previously reported geometrical prediction. The diffraction in this central region is lower by two to four orders of magnitude when compared to the sharp-edged disk. The achieved umbra level at the center ranges from 10−4 to below 10−7, depending on the geometry of the teeth. Conclusions. Our study shows that serrated occulters can achieve a high rejection and can almost reach the performance of the apodized disk when very many teeth are used. We prove that shaped occulters must be preferred to simple disks in solar and stellar coronagraphy.

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Aime, C., C. Theys, R. Rougeot y H. Lantéri. "Principle of Fredholm image reconstruction in the vignetting zone of an externally occulted solar coronagraph". Astronomy & Astrophysics 622 (febrero de 2019): A212. http://dx.doi.org/10.1051/0004-6361/201833843.

Texto completo

Resumen

Aims. This study is carried out in the context of data processing of the solar coronagraph ASPIICS of the future formation-flying mission Proba-3, which is expected to provide images of the corona very close to the limb. There will be a transition zone of the order of 100 arcsec close to the limb, where the telescope aperture suffers a strong vignetting by the external occulter (a disc of 1.42 m at 144 m). The instrument response in this region will vary rapidly both in shape and in integrated intensity, the latter being particular to the external occultation. The aim of this paper is to propose a technique to recover as much as possible of the image of the corona very close to the limb in the vignetting zone. Methods. The object image relationship in this zone is not defined by the usual convolution but by the more general Fredholm integral of the first kind. Theoretical aspects of the problem are detailed in the context of a matrix formalism for the inversion of the Fredholm integral, formalism that we maintain up to the end of the numerical simulations, which is specific to the present work. The iterative Richardson-Lucy algorithm, specially written for the non-constant integrated intensity of the responses is used here for reconstruction. A study of the effect of noise on a photodetected image is made. Results. An important part of the work consisted in calculating the elements of the transfer matrix between the object and the image for a simulation on a small region of size 100 × 100 arcsec sampled over 128 × 128 pixels. This is obtained propagating the light through the system using a previously published approach. On a toy object, the reconstruction is excellent down to about 60 arcsec from the limb, corresponding to a vignetting of 50%. The drawback is that the recovery of a N × N object requires the handling of a N2 × N2 matrix, i.e. a 16384 × 16384 transfer matrix here. However, taking into account radial symmetries of the experiment, we propose the use of a transformation from Cartesian to polar coordinates which allows to apply the same procedure all around the sun as for a small region.

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Meftah, Mustapha, Fabrice Boust, Philippe Keckhut, Alain Sarkissian, Thomas Boutéraon, Slimane Bekki, Luc Damé et al. "INSPIRE-SAT 7, a Second CubeSat to Measure the Earth’s Energy Budget and to Probe the Ionosphere". Remote Sensing 14, n.º 1 (1 de enero de 2022): 186. http://dx.doi.org/10.3390/rs14010186.

Texto completo

Resumen

INSPIRE-SAT 7 is a French 2-Unit CubeSat (11.5 × 11.5 × 22.7 cm) primarily designed for Earth and Sun observation. INSPIRE-SAT 7 is one of the missions of the International Satellite Program in Research and Education (INSPIRE). Twice the size of a 4 × 4 Rubik’s Cube and weighing about 3 kg, INSPIRE-SAT 7 will be deployed in Low Earth Orbit (LEO) in 2023 to join its sister satellite, UVSQ-SAT. INSPIRE-SAT 7 represents one of the in-orbit demonstrators needed to test how two Earth observation CubeSats in orbit can be utilized to set up a satellite constellation. This new scientific and technological pathfinder CubeSat mission (INSPIRE-SAT 7) uses a multitude of miniaturized sensors on all sides of the CubeSat to measure the Earth’s energy budget components at the top-of-the-atmosphere for climate change studies. INSPIRE-SAT 7 contains also a High-Frequency (HF) payload that will receive HF signals from a ground-based HF transmitter to probe the ionosphere for space weather studies. Finally, this CubeSat is equipped with several technological demonstrators (total solar irradiance sensors, UV sensors to measure solar spectral irradiance, a new Light Fidelity (Li-Fi) wireless communication system, a new versatile telecommunication system suitable for CubeSat). After introducing the objectives of the INSPIRE-SAT 7 mission, we present the satellite definition and the mission concept of operations. We also briefly show the observations made by the UVSQ-SAT CubeSat, and assess how two CubeSats in orbit could improve the information content of their Earth’s energy budget measurements. We conclude by reporting on the potential of future missions enabled by CubeSat constellations.

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Patterson, Richard J., Steven R. Majewski, Catherine L. Slesnick, Jaehyon Rhee, Jeffrey D. Crane, Allyson A. Polak, Arunav Kundu et al. "The Grid Giant Star Survey for the Space Interferometry Mission". International Astronomical Union Colloquium 183 (2001): 65–74. http://dx.doi.org/10.1017/s0252921100078623.

Texto completo

Resumen

AbstractNASA’s Space Interferometry Mission (SIM), scheduled for launch in 2009, will determine the positions of thousands of stars as faint as V = 20 to a precision better than 4 microarcseconds (µas). A key part of the mission is the Astrometric Grid, which is a reference frame of several thousand stars with V ≤ 13 against which all relative measurements will be calibrated. To serve as a reliable inertial reference frame, the Grid must be astrometrically stable against photocenter jitter (from planets, binary companions, flaring or spotting) at the ~ 4µas level. Sub–solar metallicity giant stars, by virtue of their intrinsic luminosity, can probe the Galaxy to greater distances than almost any other stellar type at the same apparent magnitude. Thus, distant (> 3 kpc) giants with V < 13 will have proportionately smaller astrometric jitter compared to other potential Astrometric Grid star candidates. The Grid Giant Star Survey is a patchwork all-sky survey to find sub–solar metallicity K giants for the Grid, and to provide a unique database for studies of Galactic stellar populations. We describe here the survey characteristics and give examples of results to date.

Los estilos APA, Harvard, Vancouver, ISO, etc.

11

West, Matthew J., Christian Kintziger, Margit Haberreiter, Manfred Gyo, David Berghmans, Samuel Gissot, Valeria Büchel, Leon Golub, Sergei Shestov y Jackie A. Davies. "LUCI onboard Lagrange, the next generation of EUV space weather monitoring". Journal of Space Weather and Space Climate 10 (2020): 49. http://dx.doi.org/10.1051/swsc/2020052.

Texto completo

Resumen

Lagrange eUv Coronal Imager (LUCI) is a solar imager in the Extreme UltraViolet (EUV) that is being developed as part of the Lagrange mission, a mission designed to be positioned at the L5 Lagrangian point to monitor space weather from its source on the Sun, through the heliosphere, to the Earth. LUCI will use an off-axis two mirror design equipped with an EUV enhanced active pixel sensor. This type of detector has advantages that promise to be very beneficial for monitoring the source of space weather in the EUV. LUCI will also have a novel off-axis wide field-of-view, designed to observe the solar disk, the lower corona, and the extended solar atmosphere close to the Sun–Earth line. LUCI will provide solar coronal images at a 2–3 min cadence in a pass-band centred on 19.5. Observations made through this pass-band allow for the detection and monitoring of semi-static coronal structures such as coronal holes, prominences, and active regions; as well as transient phenomena such as solar flares, limb coronal mass ejections (CMEs), EUV waves, and coronal dimmings. The LUCI data will complement EUV solar observations provided by instruments located along the Sun–Earth line such as PROBA2-SWAP, SUVI-GOES and SDO-AIA, as well as provide unique observations to improve space weather forecasts. Together with a suite of other remote-sensing and in-situ instruments onboard Lagrange, LUCI will provide science quality operational observations for space weather monitoring.

Los estilos APA, Harvard, Vancouver, ISO, etc.

12

Zhang, C., Z. X. Ling, X. J. Sun, S. L. Sun, Y. Liu, Z. D. Li, Y. L. Xue et al. "First Wide Field-of-view X-Ray Observations by a Lobster-eye Focusing Telescope in Orbit". Astrophysical Journal Letters 941, n.º 1 (1 de diciembre de 2022): L2. http://dx.doi.org/10.3847/2041-8213/aca32f.

Texto completo

Resumen

Abstract As a novel X-ray focusing technology, lobster-eye micropore optics (MPO) feature both a wide observing field of view and true imaging capability, promising sky monitoring with significantly improved sensitivity and spatial resolution in soft X-rays. Since first proposed by Angel, the optics have been extensively studied, developed and trialed over the past decades. In this Letter, we report on the first-light results from a flight experiment of the Lobster Eye Imager for Astronomy, a pathfinder of the wide-field X-ray telescope of the Einstein Probe mission. The piggyback imager, launched in 2022 July, has a mostly unvignetted field of view of 18.°6 × 18.°6. Its spatial resolution is in the range of 4′–7′ in FWHM and the focal spot effective area is 2–3 cm2, both showing only mild fluctuations across the field of view. We present images of the Galactic center region, Sco X-1, and the diffuse Cygnus Loop nebular taken in snapshot observations over 0.5–4 keV. These are truly wide-field X-ray images of celestial bodies observed, for the first time, by a focusing imaging telescope. Initial analyses of the in-flight data show excellent agreement between the observed images and the on-ground calibration and simulations. The instrument and its characterization are briefly described, as well as the flight experiment. The results provide a solid basis for the development of the present and proposed wide-field X-ray missions using lobster-eye MPO.

Los estilos APA, Harvard, Vancouver, ISO, etc.

13

Michel, Patrick, Luisa-M. Lara, Bernard Marty, Detlef Koschny, Maria Antonietta Barucci, Andy Cheng, Hermann Bohnhardt et al. "MarcoPolo-R: Near Earth Asteroid Sample Return Mission candidate as ESA-M3 class mission". Proceedings of the International Astronomical Union 10, H16 (agosto de 2012): 163. http://dx.doi.org/10.1017/s1743921314005183.

Texto completo

Resumen

AbstractMarcoPolo-R is a sample return mission to a primitive Near-Earth Asteroid (NEA) selected in February 2011 for the Assessment Study Phase at ESA in the framework of ESAfs Cosmic Vision 2 program. MarcoPolo-R is a European-led mission with a proposed NASA contribution. MarcoPolo-R takes advantage of three industrial studies completed as part of the previous Marco Polo mission (see ESA/SRE (2009)3). The aim of the new Assessment Study is to reduce the cost of the mission while maintaining its high science level, on the basis of advanced studies and technologies, as well as optimization of the mission. MarcoPolo-R will rendezvous with a unique kind of target, a primitive binary NEA, scientifically characterize it at multiple scales, and return a unique pristine sample to Earth unaltered by the atmospheric entry process or terrestrial weathering. The baseline target of MarcoPolo-R is the primitive binary NEA (175706) 1996 FG3, which offers a very efficient operational and technical mission profile. A binary target also provides enhanced science return: the choice of this target will allow new investigations to be performed more easily compared to a single object, and also enables investigations of the fascinating geology and geophysics of asteroids that are impossible to obtain from a single object. Precise measurements of the mutual orbit and rotation state of both components can be used to probe higher-level harmonics of the gravitational potential, and therefore the internal structure. A unique opportunity is offered to study the dynamical evolution driven by the YORP/Yarkovsky thermal effects. Possible migration of regolith on the primary from poles to equator allows the increasing maturity of asteroidal regolith with time to be expressed as a latitude-dependent trend, with the most-weathered material at the equator matching what is seen in the secondary. MarcoPolo-R will allow us to study the most primitive materials available to investigate early solar system formation processes. Moreover, MarcoPolo-R will provide a sample from a known target with known geological context. Direct investigation of both the regolith and fresh interior fragments is also impossible by any means other than sample return. The main goal of the MarcoPolo-R mission is to return unaltered NEA material for detailed analysis in ground-based laboratories. The limited sampling provided by meteorites does not offer the most primitive material available in near-Earth space. More primitive material, having experienced less alteration on the asteroid, will be more friable and would not survive atmospheric entry in any discernible amount. Only in the laboratory can instruments with the necessary precision and sensitivity be applied to individual components of the complex mixture of materials that forms an asteroid regolith, to determine their precise chemical and isotopic composition. Such measurements are vital for revealing the evidence of stellar, interstellar medium, pre-solar nebula and parent body processes that are retained in primitive asteroidal material, unaltered by atmospheric entry or terrestrial contamination. It is no surprise therefore that sample return missions are considered a priority by a number of the leading space agencies.

Los estilos APA, Harvard, Vancouver, ISO, etc.

14

Heller, René, Guillem Anglada-Escudé, Michael Hippke y Pierre Kervella. "Low-cost precursor of an interstellar mission". Astronomy & Astrophysics 641 (septiembre de 2020): A45. http://dx.doi.org/10.1051/0004-6361/202038687.

Texto completo

Resumen

The solar photon pressure provides a viable source of thrust for spacecraft in the solar system. Theoretically it could also enable interstellar missions, but an extremely small mass per cross section area is required to overcome the solar gravity. We identify aerographite, a synthetic carbon-based foam with a density of 0.18 kg m−3 (15 000 times more lightweight than aluminum) as a versatile material for highly efficient propulsion with sunlight. A hollow aerographite sphere with a shell thickness ϵshl = 1 mm could go interstellar upon submission to solar radiation in interplanetary space. Upon launch at 1 AU from the Sun, an aerographite shell with ϵshl = 0.5 mm arrives at the orbit of Mars in 60 d and at Pluto’s orbit in 4.3 yr. Release of an aerographite hollow sphere, whose shell is 1 μm thick, at 0.04 AU (the closest approach of the Parker Solar Probe) results in an escape speed of nearly 6900 km s−1 and 185 yr of travel to the distance of our nearest star, Proxima Centauri. The infrared signature of a meter-sized aerographite sail could be observed with JWST up to 2 AU from the Sun, beyond the orbit of Mars. An aerographite hollow sphere, whose shell is 100 μm thick, of 1 m (5 m) radius weighs 230 mg (5.7 g) and has a 2.2 g (55 g) mass margin to allow interstellar escape. The payload margin is ten times the mass of the spacecraft, whereas the payload on chemical interstellar rockets is typically a thousandth of the weight of the rocket. Using 1 g (10 g) of this margin (e.g., for miniature communication technology with Earth), it would reach the orbit of Pluto 4.7 yr (2.8 yr) after interplanetary launch at 1 AU. Simplistic communication would enable studies of the interplanetary medium and a search for the suspected Planet Nine, and would serve as a precursor mission to α Centauri. We estimate prototype developments costs of 1 million USD, a price of 1000 USD per sail, and a total of < 10 million USD including launch for a piggyback concept with an interplanetary mission.

Los estilos APA, Harvard, Vancouver, ISO, etc.

15

Sánchez-Zapero, Jorge, Fernando Camacho, Enrique Martínez-Sánchez, Roselyne Lacaze, Dominique Carrer, Florian Pinault, Iskander Benhadj y Joaquín Muñoz-Sabater. "Quality Assessment of PROBA-V Surface Albedo V1 for the Continuity of the Copernicus Climate Change Service". Remote Sensing 12, n.º 16 (12 de agosto de 2020): 2596. http://dx.doi.org/10.3390/rs12162596.

Texto completo

Resumen

The Copernicus Climate Change Service (C3S) includes estimates of Essential Climate Variables (ECVs) as a series of Climate Data Records (CDRs) derived from satellite data. The C3S Surface Albedo (SA) v1.0 CDR is composed of observations from National Oceanic and Atmospheric Administration (NOAA) Very High Resolution Radiometers (AVHRR) (1981–2005), and VEGETATION sensors onboard Satellites for the Observation of the Earth (SPOT/VGT) (1998–2014) and Project for Onboard Autonomy satellite (PROBA-V) (2014–2020), and will continue with Sentinel-3 (from 2020 onwards). The goal of this study is to assess the uncertainties associated with the C3S PROBA-V SA v1.0 product, with a focus on the transition from SPOT/VGT to PROBA-V. The methodology followed the good practices recommended by the Land Product Validation sub-group (LPV) of the Working Group on Calibration and Validation (WGCV) of the Committee on Earth Observing Satellites (CEOS) for the validation of satellite-derived global albedo products. Several performance criteria were evaluated, including an intercomparison with National Aeronautics and Space Agency (NASA) MCD43A3 C6 products. C3S PROBA-V SA v1.0 and MCD43A3 C6 showed similar completeness but had higher fractions of missing data than C3S SPOT/VGT SA v1.0. C3S PROBA-V SA v1.0 showed similar precision (~1%) to MCD43A3 C6, improving the results of SPOT/VGT SA v1.0 (2–3%), but C3S PROBA-V SA v1.0 provided residual noise in the near-infrared (NIR). Good spatio-temporal continuity between C3S PROBA-V and SPOT/VGT SA v1.0 products was found with a mean bias between ±2%. The comparison with MCD43A3 C6 showed positive mean biases (5%, 8%, and 12% for visible, NIR and total shortwave, respectively). The accuracy assessment with ground measurements showed a median error of 18.4% with systematic overestimation (positive bias of 11.5%). The percentage of PROBA-V retrievals complying with the C3S target requirements was 28.6%.

Los estilos APA, Harvard, Vancouver, ISO, etc.

16

Zhou, Huan, Jian-Guo Yan, De-Zhen Xu, Yong Huang y Hai-Tao Li. "Method for differential phase delay resolution of phase referencing VLBI technique and its experimental verification". Research in Astronomy and Astrophysics 21, n.º 11 (1 de diciembre de 2021): 296. http://dx.doi.org/10.1088/1674-4527/21/11/296.

Texto completo

Resumen

Abstract The phase referencing Very Long Baseline Interferometry (VLBI) technique is a newly developed tool to measure the angular position of a deep space exploration probe in the plane-of-the-sky. Through alternating observations between the probe and a nearby reference radio source, their accurate relative angular separation can be obtained from the radio images generated by this technique. To meet the requirements of the current orbit determination software, differential delay should be firstly derived from those radio images. A method to resolve the differential phase delay from the phase referencing VLBI technique is proposed in this paper, and as well the mathematical model for differential phase ambiguity resolution is established. This method is verified with practical measurement data from the Chang’E-3 mission. The differential phase delay between the Chang’E-3 lander and rover was derived from the phase referencing VLBI measurements, and was then imported into the Shanghai astronomical observatory Orbit Determination Program (SODP) to calculate the position of the rover relative to the lander on the lunar surface. The results are consistent with those acquired directly from radio images, indicating that the differential phase ambiguity has been correctly resolved. The proposed method can be used to promote applications of the phase referencing VLBI technique in future lunar or deep space explorations, and more accurate orbit determination becomes promising.

Los estilos APA, Harvard, Vancouver, ISO, etc.

17

Wattieaux, Gaëtan, Pierre Henri, Nicolas Gilet, Xavier Vallières y Jan Deca. "Plasma characterization at comet 67P between 2 and 4 AU from the Sun with the RPC-MIP instrument". Astronomy & Astrophysics 638 (junio de 2020): A124. http://dx.doi.org/10.1051/0004-6361/202037571.

Texto completo

Resumen

The plasma of comet 67P/Churyumov-Gerasimenko is analyzed based on the RPC-MIP mutual impedance probe data of the Rosetta mission. Numerical simulations of the RPC-MIP instrumental response considering two populations of electrons were fit on experimental responses acquired from January to September 2016 to extract the electron densities and temperatures. A time-tracking of the plasma parameters was performed, leading to the identification of a cold and a warm population of electrons during the period of interest. The respective densities and temperatures lie in the ranges [100; 1000] cm−3 and [0.05; 0.3] eV for the cold electrons and in the ranges [50; 500] cm−3 and [2; 10] eV for the warm electrons. Warm electrons most of the time made up between 10 and 30% of the whole population, while the temperature ratio between warm and cold electrons lay mostly between 30 and 70 during the period we studied. The fluctuation range of the plasma parameters, that is, the electron densities and temperatures, appears to have remained rather constant during the last nine months of the mission. We take the limitations of the instrument that are due to the experimental noise into account in our discussion of the results.

Los estilos APA, Harvard, Vancouver, ISO, etc.

18

Venzmer, M. S. y V. Bothmer. "Solar-wind predictions for the Parker Solar Probe orbit". Astronomy & Astrophysics 611 (marzo de 2018): A36. http://dx.doi.org/10.1051/0004-6361/201731831.

Texto completo

Resumen

Context. The Parker Solar Probe (PSP; formerly Solar Probe Plus) mission will be humanitys first in situ exploration of the solar corona with closest perihelia at 9.86 solar radii (R⊙) distance to the Sun. It will help answer hitherto unresolved questions on the heating of the solar corona and the source and acceleration of the solar wind and solar energetic particles. The scope of this study is to model the solar-wind environment for PSPs unprecedented distances in its prime mission phase during the years 2018 to 2025. The study is performed within the Coronagraphic German And US SolarProbePlus Survey (CGAUSS) which is the German contribution to the PSP mission as part of the Wide-field Imager for Solar PRobe.Aim. We present an empirical solar-wind model for the inner heliosphere which is derived from OMNI and Helios data. The German-US space probes Helios 1 and Helios 2 flew in the 1970s and observed solar wind in the ecliptic within heliocentric distances of 0.29 au to 0.98 au. The OMNI database consists of multi-spacecraft intercalibrated in situ data obtained near 1 au over more than five solar cycles. The international sunspot number (SSN) and its predictions are used to derive dependencies of the major solar-wind parameters on solar activity and to forecast their properties for the PSP mission.Methods. The frequency distributions for the solar-wind key parameters, magnetic field strength, proton velocity, density, and temperature, are represented by lognormal functions. In addition, we consider the velocity distributions bi-componental shape, consisting of a slower and a faster part. Functional relations to solar activity are compiled with use of the OMNI data by correlating and fitting the frequency distributions with the SSN. Further, based on the combined data set from both Helios probes, the parameters frequency distributions are fitted with respect to solar distance to obtain power law dependencies. Thus an empirical solar-wind model for the inner heliosphere confined to the ecliptic region is derived, accounting for solar activity and for solar distance through adequate shifts of the lognormal distributions. Finally, the inclusion of SSN predictions and the extrapolation down to PSPs perihelion region enables us to estimate the solar-wind environment for PSPs planned trajectory during its mission duration.Results. The CGAUSS empirical solar-wind model for PSP yields dependencies on solar activity and solar distance for the solar-wind parameters’ frequency distributions. The estimated solar-wind median values for PSPs first perihelion in 2018 at a solar distance of 0.16 au are 87 nT, 340 km s−1, 214 cm−3, and 503 000 K. The estimates for PSPs first closest perihelion, occurring in 2024 at 0.046 au (9.86 R⊙), are 943 nT, 290 km s−1, 2951 cm−3, and 1 930 000 K. Since the modeled velocity and temperature values below approximately 20 R⊙appear overestimated in comparison with existing observations, this suggests that PSP will directly measure solar-wind acceleration and heating processes below 20 R⊙ as planned.

Los estilos APA, Harvard, Vancouver, ISO, etc.

19

Fujishima, Kosuke, Szymon Dziomba, Hajime Yano, Seydina I. Kebe, Mohamed Guerrouache, Benjamin Carbonnier y Lynn J. Rothschild. "The non-destructive separation of diverse astrobiologically relevant organic molecules by customizable capillary zone electrophoresis and monolithic capillary electrochromatography". International Journal of Astrobiology 18, n.º 6 (29 de mayo de 2019): 562–74. http://dx.doi.org/10.1017/s1473550419000065.

Texto completo

Resumen

AbstractThe in situ detection of organic molecules in space is key to understanding the variety and the distribution of the building blocks of life, and possibly the detection of extraterrestrial life itself. Gas chromatography mass spectrometry (GC-MS) has been the most sensitive analytical strategy for organic analyses in flight, and was used on missions from NASA's Viking, Phoenix, Curiosity missions to ESA's Rosetta space probe. While pyrolysis GC-MS revealed the first organics on Mars, this step alters or degrades certain fragile molecules that are excellent biosignatures including polypeptides, oligonucleotides and polysaccharides, rendering the intact precursors undetectable. We have identified a solution tailored to the detection of biopolymers and other biomarkers by the use of liquid-based capillary electrophoresis and electrochromatography. In this study, we show that a capillary electrochromatography approach using monolithic stationary phases with tailor-made surface chemistry can separate and identify various polycyclic aromatic hydrocarbons, nucleobases and aromatic acids that could be formed under astrophysically relevant conditions. In order to simulate flyby organic sample capture, we conducted hypervelocity impact experiments which consisted of accelerating peptide-soaked montmorillonite particles to a speed of 5.6 km s−1, and capturing them in an amorphous silica aerogel of 10 mg cm−3 bulk density. Bulk peptide extraction from aerogel followed by capillary zone electrophoresis led to the detection of only two stereoisomeric peptide peaks. The recovery rates of each step of the extraction procedure after the hypervelocity impact suggest that major peptide loss occurred during the impact. Our study provides initial exploration of feasibility of this approach for capturing intact peptides, and subsequently detecting candidate biomolecules during flight missions that would be missed by GC-MS alone. As the monolith-based electrochromatography technology could be customized to detect specific classes of compounds as well as miniaturized, these results demonstrate the potential of the instrumentation for future astrobiology-related spaceflight missions.

Los estilos APA, Harvard, Vancouver, ISO, etc.

20

Guillemant, S., V. Génot, J. C. Matéo-Vélez, R. Ergun y P. Louarn. "Solar wind plasma interaction with solar probe plus spacecraft". Annales Geophysicae 30, n.º 7 (24 de julio de 2012): 1075–92. http://dx.doi.org/10.5194/angeo-30-1075-2012.

Texto completo

Resumen

Abstract. 3-D PIC (Particle In Cell) simulations of spacecraft-plasma interactions in the solar wind context of the Solar Probe Plus mission are presented. The SPIS software is used to simulate a simplified probe in the near-Sun environment (at a distance of 0.044 AU or 9.5 RS from the Sun surface). We begin this study with a cross comparison of SPIS with another PIC code, aiming at providing the static potential structure surrounding a spacecraft in a high photoelectron environment. This paper presents then a sensitivity study using generic SPIS capabilities, investigating the role of some physical phenomena and numerical models. It confirms that in the near- sun environment, the Solar Probe Plus spacecraft would rather be negatively charged, despite the high yield of photoemission. This negative potential is explained through the dense sheath of photoelectrons and secondary electrons both emitted with low energies (2–3 eV). Due to this low energy of emission, these particles are not ejected at an infinite distance of the spacecraft and would rather surround it. As involved densities of photoelectrons can reach 106 cm−3 (compared to ambient ions and electrons densities of about 7 × 103 cm−3), those populations affect the surrounding plasma potential generating potential barriers for low energy electrons, leading to high recollection. This charging could interfere with the low energy (up to a few tens of eV) plasma sensors and particle detectors, by biasing the particle distribution functions measured by the instruments. Moreover, if the spacecraft charges to large negative potentials, the problem will be more severe as low energy electrons will not be seen at all. The importance of the modelling requirements in terms of precise prediction of spacecraft potential is also discussed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

21

NI, WEI-TOU. "EMPIRICAL FOUNDATIONS OF THE RELATIVISTIC GRAVITY". International Journal of Modern Physics D 14, n.º 06 (junio de 2005): 901–21. http://dx.doi.org/10.1142/s0218271805007139.

Texto completo

Resumen

In 1859, Le Verrier discovered the mercury perihelion advance anomaly. This anomaly turned out to be the first relativistic-gravity effect observed. During the 141 years to 2000, the precisions of laboratory and space experiments, and astrophysical and cosmological observations on relativistic gravity have been improved by 3 orders of magnitude. In 1999, we envisaged a 3–6 order improvement in the next 30 years in all directions of tests of relativistic gravity. In 2000, the interferometric gravitational wave detectors began their runs to accumulate data. In 2003, the measurement of relativistic Shapiro time-delay of the Cassini spacecraft determined the relativistic-gravity parameter γ to be 1.000021 ± 0.000023 of general relativity — a 1.5-order improvement. In October 2004, Ciufolini and Pavlis reported a measurement of the Lense–Thirring effect on the LAGEOS and LAGEOS2 satellites to be 0.99 ± 0.10 of the value predicted by general relativity. In April 2004, Gravity Probe B (Stanford relativity gyroscope experiment to measure the Lense–Thirring effect to 1%) was launched and has been accumulating science data for more than 170 days now. μSCOPE (MICROSCOPE: MICRO-Satellite à trainée Compensée pour l'Observation du Principle d'Équivalence) is on its way for a 2008 launch to test Galileo equivalence principle to 10-15. LISA Pathfinder (SMART2), the technological demonstrator for the LISA (Laser Interferometer Space Antenna) mission is well on its way for a 2009 launch. STEP (Satellite Test of Equivalence Principle), and ASTROD (Astrodynamical Space Test of Relativity using Optical Devices) are in good planning stage. Various astrophysical tests and cosmological tests of relativistic gravity will reach precision and ultra-precision stages. Clock tests and atomic interferometry tests of relativistic gravity will reach an ever-increasing precision. These will give revived interest and development both in experimental and theoretical aspects of gravity, and may lead to answers to some profound questions of gravity and the cosmos.

Los estilos APA, Harvard, Vancouver, ISO, etc.

22

NI, WEI-TOU. "ASTROD–AN OVERVIEW". International Journal of Modern Physics D 11, n.º 07 (agosto de 2002): 947–62. http://dx.doi.org/10.1142/s0218271802002499.

Texto completo

Resumen

The objectives of the Astrodynamical Space Test of Relativity using Optical Devices (ASTROD) Mission concept are threefold. The first objective is to discover and explore fundamental physical laws governing matter, space and time via testing relativistic gravity with 3-6 orders of magnitude improvement. Relativistic gravity is an important cornerstone of physics, astronomy and cosmology. Its improved test is crucial to cosmology and modern theories of gravitation including superstring theories. Included in this objective is the precise determination of the relativistic parameters β and γ, the improved measurement of Ġ and a precise determination of an anomalous, constant acceleration directed towards the Sun. The second objective of the ASTROD mission is the high-precision measurement of the solar-system parameter. This includes: (i) a measurements of solar angular momentum via Lense-Thirring effect and the detection of solar g-mode oscillations via their changing gravity field, thus, providing a new eye to see inside the Sun; (ii) precise determination of the planetary orbit elements and masses; (iii) better determination of the orbits and masses of major asteroids. These measurements give better solar dynamics and probe the origin of our solar system. The third objective is to detect and observe gravitational waves from massive black holes and galactic binary stars in the frequency range 50 μHz to 5 mHz. Background gravitational -waves will also be explored. A desirable implementation is to have two spacecraft in separate solar orbit carrying a payload of a proof mass, two telescopes, two 1-2 W lasers, a clock and a drag-free system, together with an Earth reference system. the two spacecraft range coherently with the Earth reference system using lasers. When they are near, they range coherently to each other. The Earth reference system could be ground stations, Earth satellites and/or spacecraft near Earth-Sun Lagrange points. In this overview, we discuss the payload concept, the technological requirements, technological developments, orbit design, orbit simulation, the measurement of solar angular momentum, the gravitational-wave detection sensitivity, and the solar g-mode detection possibility for this mission concept. A simplified mission, Mini-ASTROD with one spacecraft ranging optically with ground stations, together with Super-ASTROD with four spacecraft of 5 AU (Jupiter-like) orbits, will be mentioned in the end. Super-ASTROD is a dedicated low-frequency gravitational-wave detection concept. For Mini-ASTROD, the first objective of ASTROD will be largely achieved; the second objective will be partially achieved; for gravitational wave detection, the sensitivity will be better than the present-day sensitivity using Doppler tracking by radio waves.

Los estilos APA, Harvard, Vancouver, ISO, etc.

23

Marchesi, S., R. Gilli, G. Lanzuisi, T. Dauser, S. Ettori, F. Vito, N. Cappelluti et al. "Mock catalogs for the extragalactic X-ray sky: Simulating AGN surveys with ATHENA and with the AXIS probe". Astronomy & Astrophysics 642 (octubre de 2020): A184. http://dx.doi.org/10.1051/0004-6361/202038622.

Texto completo

Resumen

We present a series of new, publicly available mock catalogs of X-ray selected active galactic nuclei (AGNs), nonactive galaxies, and clusters of galaxies. These mocks are based on up-to-date observational results on the demographic of extragalactic X-ray sources and their extrapolations. They reach fluxes below 10−20 erg cm−2 s−1 in the 0.5–2 keV band, that is, more than an order of magnitude below the predicted limits of future deep fields, and they therefore represent an important tool for simulating extragalactic X-ray surveys with both current and future telescopes. We used our mocks to perform a set of end-to-end simulations of X-ray surveys with the forthcoming ATHENA mission and with the AXIS probe, a subarcsecond resolution X-ray mission concept proposed to the Astro 2020 Decadal Survey. We find that these proposed, next generation surveys may transform our knowledge of the deep X-ray Universe. As an example, in a total observing time of 15 Ms, AXIS would detect ∼225 000 AGNs and ∼50 000 nonactive galaxies, reaching a flux limit of f0.5−2 ∼ 5 × 10−19 erg cm−2 s−1 in the 0.5–2 keV band, with an improvement of over an order of magnitude with respect to surveys with current X-ray facilities. Consequently, 90% of these sources would be detected for the first time in the X-rays. Furthermore, we show that deep and wide X-ray surveys with instruments such as AXIS and ATHENA are expected to detect ∼20 000 z > 3 AGNs and ∼250 sources at redshift z > 6, thus opening a new window of knowledge on the evolution of AGNs over cosmic time and putting strong constraints on the predictions of theoretical models of black hole seed accretion in the early universe.

Los estilos APA, Harvard, Vancouver, ISO, etc.

24

Guan, Meiqian, Tianhe Xu, Min Li, Fan Gao y Dapeng Mu. "Navigation in GEO, HEO, and Lunar Trajectory Using Multi-GNSS Sidelobe Signals". Remote Sensing 14, n.º 2 (11 de enero de 2022): 318. http://dx.doi.org/10.3390/rs14020318.

Texto completo

Resumen

Positioning of spacecraft (e.g., geostationary orbit (GEO), high elliptical orbit (HEO), and lunar trajectory) is crucial for mission completion. Instead of using ground control systems, global navigation satellite system (GNSS) can be an effective approach to provide positioning, navigation and timing service for spacecraft. In 2020, China finished the construction of the third generation of BeiDou navigation satellite system (BDS-3); this global coverage system will contribute better sidelobe signal visibility for spacecraft. Meanwhile, with more than 100 GNSS satellites, multi-GNSS navigation performance on the spacecraft is worth studying. In this paper, instead of using signal-in-space ranging errors, we simulate pseudorange observations with measurement noises varying with received signal powers. Navigation performances of BDS-3 and its combinations with other systems were conducted. Results showed that, owing to GEO and inclined geosynchronous orbit (IGSO) satellites, all three types (GEO, HEO, and lunar trajectory) of spacecraft received more signals from BDS-3 than from other navigation systems. Single point positioning (SPP) accuracy of the GEO and HEO spacecraft was 17.7 and 23.1 m, respectively, with BDS-3 data alone. Including the other three systems, i.e., GPS, Galileo, and GLONASS, improved the SPP accuracy by 36.2% and 19.9% for GEO and HEO, respectively. Navigation performance of the lunar probe was significantly improved when receiver sensitivity increased from 20 dB-Hz to 15 dB-Hz. Only dual- (BDS-3/GPS) or multi-GNSS (BDS-3, GPS, Galileo, GLONASS) could provide continuous navigation solutions with a receiver threshold of 15 dB-Hz.

Los estilos APA, Harvard, Vancouver, ISO, etc.

25

Latouf, Natasha, Sharon Xuesong Wang, Bryson Cale y Peter Plavchan. "Characterizing and Mitigating Telluric Absorption in Precise Radial Velocities. II. A Study of an M2-type Star". Astronomical Journal 164, n.º 5 (24 de octubre de 2022): 212. http://dx.doi.org/10.3847/1538-3881/ac947b.

Texto completo

Resumen

Abstract Telluric absorption lines impact the measuring of precise radial velocities (RVs) from high-resolution ground-based spectrographs. In this paper, we simulate the dependence of this impact on stellar spectral type and extend the work of the first paper in this series, which studied a G-type star, to a synthetic M-dwarf star. We quantify the bias in precise RV measurements in the visible and near-infrared (NIR) from the presence of tellurics in a simulated set of observations. We find that M-dwarf RVs are more impacted by tellurics compared to G-type stars. Specifically, for an M-dwarf star, tellurics can induce RV errors of up to 16 cm s−1 in the red optical and in excess of 220 cm s−1 in the NIR. For a G dwarf, the comparable RV systematics are 3 cm s−1 in the red optical and 240 cm s−1 in the NIR. We attribute this relative increase for M-dwarf stars to the increased concordance in wavelength between telluric lines and stellar Doppler information content. We compare the results of our simulation to data collected for Barnard’s star from the iSHELL spectrograph at the NASA Infrared Telescope Facility. This study was conducted as a follow-up to the NASA probe mission concept study EarthFinder.

Los estilos APA, Harvard, Vancouver, ISO, etc.

26

Wilkins, D. R., C. S. Reynolds y A. C. Fabian. "Venturing beyond the ISCO: detecting X-ray emission from the plunging regions around black holes". Monthly Notices of the Royal Astronomical Society 493, n.º 4 (13 de marzo de 2020): 5532–50. http://dx.doi.org/10.1093/mnras/staa628.

Texto completo

Resumen

ABSTRACT We explore how X-ray reverberation around black holes may reveal the presence of the innermost stable circular orbit (ISCO), predicted by general relativity, and probe the dynamics of the plunging region between the ISCO and the event horizon. Being able to directly detect the presence of the ISCO and probe the dynamics of material plunging through the event horizon represents a unique test of general relativity in the strong field regime. X-ray reverberation off of the accretion disc and material in the plunging region is modelled using general relativistic ray tracing simulations. X-ray reverberation from the plunging region has a minimal effect on the time-averaged X-ray spectrum and the overall lag-energy spectrum, but is manifested in the lag in the highest frequency Fourier components, above $0.01\, c^{3}\, (GM)^{-1}$ (scaled for the mass of the black hole) in the 2–4 keV energy band for a non-spinning black hole or the 1–2 keV energy band for a maximally spinning black hole. The plunging region is distinguished from disc emission not just by the energy shifts characteristic of plunging orbits, but by the rapid increase in ionization of material through the plunging region. Detection requires measurement of time lags to an accuracy of 20 per cent at these frequencies. Improving accuracy to 12 per cent will enable constraints to be placed on the dynamics of material in the plunging region and distinguish plunging orbits from material remaining on stable circular orbits, confirming the existence of the ISCO, a prime discovery space for future X-ray missions.

Los estilos APA, Harvard, Vancouver, ISO, etc.

27

Weiss, W. W., A. F. J. Moffat, A. Schwarzenberg-Czerny, O. F. Koudelka, C. C. Grant, R. E. Zee, R. Kuschnig et al. "BRITE-Constellation: Nanosatellites for precision photometry of bright stars". Proceedings of the International Astronomical Union 9, S301 (agosto de 2013): 67–68. http://dx.doi.org/10.1017/s1743921313014105.

Texto completo

Resumen

AbstractBRITE-Constellation (where BRITE stands for BRIght Target Explorer) is an international nanosatellite mission to monitor photometrically, in two colours, brightness and temperature variations of stars brighter than V ≈ 4, with precision and time coverage not possible from the ground. The current mission design consists of three pairs of 7 kg nanosats (hence “Constellation”) from Austria, Canada and Poland carrying optical telescopes (3 cm aperture) and CCDs. One instrument in each pair is equipped with a blue filter; the other, a red filter. The first two nanosats (funded by Austria) are UniBRITE, designed and built by UTIAS-SFL (University of Toronto Institute for Aerospace Studies-Space Flight Laboratory) and its twin, BRITE-Austria, built by the Technical University Graz (TUG) with support of UTIAS-SFL. They were launched on 25 February 2013 by the Indian Space Agency, under contract to the Canadian Space Agency.Each BRITE instrument has a wide field of view (≈ 24 degrees), so up to 15 bright stars can be observed simultaneously in 32 × 32 sub-rasters. Photometry (with reduced precision but thorough time sampling) of additional fainter targets will be possible through on-board data processing. A critical technical element of the BRITE mission is the three-axis attitude control system to stabilize a nanosat with very low inertia. The pointing stability is better than 1.5 arcminutes rms, a significant advance by UTIAS-SFL over any previous nanosatellite.BRITE-Constellation will primarily measure p- and g-mode pulsations to probe the interiors and ages of stars through asteroseismology. The BRITE sample of many of the brightest stars in the night sky is dominated by the most intrinsically luminous stars: massive stars seen at all evolutionary stages, and evolved medium-mass stars at the very end of their nuclear burning phases (cool giants and AGB stars). The Hertzsprung-Russell diagram for stars brighter than mag V=4 from which the BRITE-Constellation sample will be selected is shown in Fig. 1. This sample falls into two principal classes of stars:(1) Hot luminous H-burning stars (O to F stars). Analyses of OB star variability have the potential to help solve two outstanding problems: the sizes of convective (mixed) cores in massive stars and the influence of rapid rotation on their structure and evolution.(2) Cool luminous stars (AGB stars, cool giants and cool supergiants). Measurements of the time scales involved in surface granulation and differential rotation will constrain turbulent convection models.Mass loss from these stars (especially the massive supernova progenitors) is a major contributor to the evolution of the interstellar medium, so in a sense, this sample dominates cosmic “ecology” in terms of future generations of star formation. The massive stars are believed to share many characteristics of the lower mass range of the first generation of stars ever formed (although the original examples are of course long gone).BRITE observations will also be used to detect some Jupiter- and even Neptune-sized planets around bright host stars via transits, as expected on the basis of statistics from the Kepler exoplanet mission. Detecting planets around such very bright stars will greatly facilitate their subsequent characterization. BRITE will also use surface spots to investigate stellar rotation.The following Table summarizes launch and orbit parameters of BRITE-Constellation components.The full version of this paper describing in more detail BRITE-Constellation will be published separately in a journal. The symposium presentation is available at http://iaus301.astro.uni.wroc.pl/program.php

Los estilos APA, Harvard, Vancouver, ISO, etc.

28

Bowman, D. M., B. Buysschaert, C. Neiner, P. I. Pápics, M. E. Oksala y C. Aerts. "K2 space photometry reveals rotational modulation and stellar pulsations in chemically peculiar A and B stars". Astronomy & Astrophysics 616 (agosto de 2018): A77. http://dx.doi.org/10.1051/0004-6361/201833037.

Texto completo

Resumen

Context. The physics of magnetic hot stars and how a large-scale magnetic field affects their interior properties is largely unknown. Few studies have combined high-quality observations and modelling of magnetic pulsating stars, known as magneto-asteroseismology, primarily because of the dearth of detected pulsations in stars with a confirmed and well-characterised large-scale magnetic field. Aims. We aim to characterise observational signatures of rotation and pulsation in chemically peculiar candidate magnetic stars using photometry from the K2 space mission. Thus, we identify the best candidate targets for ground-based, optical spectropolarimetric follow-up observations to confirm the presence of a large-scale magnetic field. Methods. We employed customised reduction and detrending tools to process the K2 photometry into optimised light curves for a variability analysis. We searched for the periodic photometric signatures of rotational modulation caused by surface abundance inhomogeneities in 56 chemically peculiar A and B stars. Furthermore, we searched for intrinsic variability caused by pulsations (coherent or otherwise) in the amplitude spectra of these stars. Results. The rotation periods of 38 chemically peculiar stars are determined, 16 of which are the first determination of the rotation period in the literature. We confirm the discovery of high-overtone roAp pulsation modes in HD 177765 and find an additional 3 Ap and Bp stars that show evidence of high-overtone pressure modes found in roAp stars in the form of possible Nyquist alias frequencies in their amplitude spectra. Furthermore, we find 6 chemically peculiar stars that show evidence of intrinsic variability caused by gravity or pressure pulsation modes. Conclusions. The discovery of pulsations in a non-negligible fraction of chemically peculiar stars make these stars high-priority targets for spectropolarimetric campaigns to confirm the presence of their expected large-scale magnetic field. The ultimate goal is to perform magneto-asteroseismology and probe the interior physics of magnetic pulsating stars.

Los estilos APA, Harvard, Vancouver, ISO, etc.

29

Liu, Jiren, Sebastian F. Hönig, Claudio Ricci y Stéphane Paltani. "X-ray signatures of the polar dusty gas in AGN". Monthly Notices of the Royal Astronomical Society 490, n.º 3 (18 de octubre de 2019): 4344–52. http://dx.doi.org/10.1093/mnras/stz2908.

Texto completo

Resumen

ABSTRACT Recent mid-infrared interferometry observations of nearby active galactic nuclei (AGN) revealed that a significant part of the dust emission extends in the polar direction, rather than the equatorial torus/disc direction as expected by the traditional unification model. We study the X-ray signatures of this polar dusty gas with ray-tracing simulations. Different from those from the ionized gas, the scattered emission from the polar dusty gas produces self-absorption and neutral-like fluorescence lines, which are potentially a unique probe of the kinematics of the polar dusty gas. The anomalously small Fe Kα/Si Kα ratios of type 2 AGN observed previously can be naturally explained by the polar dusty gas, because the polar emission does not suffer from heavy absorption by the dense equatorial gas. The observed Si Kα lines of the Circinus galaxy and NGC 1068 show blueshifts with respect to the systemic velocities of the host galaxies, consistent with an outflowing scenario of the Si Kα-emitting gas. The 2.5–3 keV image of the Circinus galaxy is elongated along the polar direction, consistent with an origin of the polar gas. These results show that the polar-gas-scattered X-ray emission of type 2 AGN is an ideal objective for future X-ray missions, such as Athena.

Los estilos APA, Harvard, Vancouver, ISO, etc.

30

Olsen, Charlotte y Eric Gawiser. "Searching for Conformity Across Cosmic Time with Local Group and Local Volume Star Formation Histories". Astrophysical Journal 943, n.º 1 (1 de enero de 2023): 30. http://dx.doi.org/10.3847/1538-4357/acaa39.

Texto completo

Resumen

Abstract Conformity denotes the correlation of properties between pairs of galaxies as a function of separation. Correlations between properties such as the star formation rate (SFR), stellar mass, and specific star formation rate (sSFR) have implications for the impact of environment upon galaxy formation and evolution. Conformity between primary galaxies and satellites within the same dark matter halo has been well documented in simulations and observations. However, the existence of conformity at greater distances—known as two-halo conformity—remains uncertain. We investigate whether galaxies in the Local Volume to a distance of 4 Mpc show conformity by examining the SFR, sSFR, stellar mass, and quenched fraction as a function of physical separation. Making use of the star formation histories of these galaxies, we then extend this analysis back in time to offer the first probe of conformity inside our past light cone. At the present day, we find that the stellar mass or sSFR of a galaxy correlates with the median SFR of neighboring galaxies at a separation of 2–3 Mpc. At a lookback time of 1 Gyr, we find a correlation with the quenched fraction of neighboring galaxies, again at a 2–3 Mpc separation. These signals of conformity likely arise from the differences between the recent star formation histories of Local Group dwarf galaxies and those outside the Local Group. As current and future missions including JWST, Rubin, and Roman expand the sample of Local Volume galaxies, tests of conformity using star formation histories will provide an important tool for exploring spatiotemporal correlations between galaxies.

Los estilos APA, Harvard, Vancouver, ISO, etc.

31

Liodakis, I. "Toy model for the acceleration of blazar jets". Astronomy & Astrophysics 616 (agosto de 2018): A93. http://dx.doi.org/10.1051/0004-6361/201832766.

Texto completo

Resumen

Context. Understanding the acceleration mechanism of astrophysical jets has been a cumbersome endeavor from both the theoretical and observational perspective. Although several breakthroughs have been achieved in recent years, on all sides, we are still missing a comprehensive model for the acceleration of astrophysical jets. Aims. In this work we attempt to construct a simple toy model that can account for several observational and theoretical results and allow us to probe different aspects of blazar jets usually inaccessible to observations. Methods. We used the toy model and Lorentz factor estimates from the literature to constrain the black hole spin and external pressure gradient distributions of blazars. Results. Our results show that (1) the model can reproduce the velocity, spin and external pressure gradient of the jet in M 87 inferred independently by observations; (2) blazars host highly spinning black holes with 99% of BL Lac objects and 80% of flat spectrum radio quasars having spins a > 0.6; (3) the dichotomy between BL Lac objects and flat spectrum radio quasars could be attributed to their respective accretion rates. Using the results of the proposed model, we estimated the spin and external pressure gradient for 75 blazars.

Los estilos APA, Harvard, Vancouver, ISO, etc.

32

Singh, Vishaal, Christine McCarthy, Matthew Silvia, Michael V. Jakuba, Kathleen L. Craft, Alyssa R. Rhoden, Chris German y Theodore A. Koczynski. "Surviving in Ocean Worlds: Experimental Characterization of Fiber Optic Tethers across Europa-like Ice Faults and Unraveling the Sliding Behavior of Ice". Planetary Science Journal 4, n.º 1 (1 de enero de 2023): 1. http://dx.doi.org/10.3847/psj/aca3ab.

Texto completo

Resumen

Abstract As an initial step toward in situ exploration of the interiors of Ocean Worlds to search for life using cryobot architectures, we test how various communication tethers behave under potential Europa-like stress conditions. By freezing two types of pretensioned insulated fiber optic cables inside ice blocks, we simulate tethers being refrozen in a probe’s wake as it traverses through an Ocean World’s ice shell. Using a cryogenic biaxial apparatus, we simulate shear motion on preexisting faults at various velocities and temperatures. These shear tests are used to evaluate the mechanical behavior of ice, characterize the behavior of communication tethers, and explore their limitations for deployment by a melt probe. We determine (a) the maximum shear stress tethers can sustain from an ice fault, prior to failure (viable/unviable regimes for deployment), and (b) optical tether performance for communications. We find that these tethers are fairly robust across a range of temperature and velocity conditions expected on Europa (T = 95–260 K, velocity = 5 × 10−7 m s−1 to 3 × 10−4 m s−1). However, damage to the outer jackets of the tethers and stretching of inner fibers at the coldest temperatures tested both indicate a need for further tether prototype development. Overall, these studies constrain the behavior of optical tethers for use at Ocean Worlds, improve the ability to probe thermomechanical properties of dynamic ice shells likely to be encountered by landed missions, and guide future technology development for accessing the interiors of (potentially habitable ± inhabited) Ocean Worlds.

Los estilos APA, Harvard, Vancouver, ISO, etc.

33

Fox, Ori D., Harish Khandrika, David Rubin, Chadwick Casper, Gary Z. Li, Tamás Szalai, Lee Armus et al. "A Spitzer survey for dust-obscured supernovae". Monthly Notices of the Royal Astronomical Society 506, n.º 3 (21 de junio de 2021): 4199–209. http://dx.doi.org/10.1093/mnras/stab1740.

Texto completo

Resumen

ABSTRACT Supernova (SN) rates serve as an important probe of star formation models and initial mass functions. Near-infrared seeing-limited ground-based surveys typically discover a factor of 3–10 fewer SNe than predicted from far-infrared luminosities owing to sensitivity limitations arising from both a variable point-spread function (PSF) and high dust extinction in the nuclear regions of star-forming galaxies. This inconsistency has potential implications for our understanding of star-formation rates and massive-star evolution, particularly at higher redshifts, where star-forming galaxies are more common. To resolve this inconsistency, a successful SN survey in the local universe must be conducted at longer wavelengths and with a space-based telescope, which has a stable PSF to reduce the necessity for any subtraction algorithms and thus residuals. Here, we report on a 2-yr Spitzer/IRAC 3.6 $\mu$m survey for dust-extinguished SNe in the nuclear regions of forty luminous infrared galaxies (LIRGs) within 200 Mpc. The asymmetric Spitzer PSF results in worse than expected subtraction residuals when implementing standard template subtraction. Forward-modelling techniques improve our sensitivity by several ∼1.5 mag. We report the detection of 9 SNe, five of which were not discovered by optical surveys. After adjusting our predicted rates to account for the sensitivity of our survey, we find that the number of detections is consistent with the models. While this search is none the less hampered by a difficult-to-model PSF and the relatively poor resolution of Spitzer, it will benefit from future missions, such as Roman and the James Webb Space Telescope, with higher resolution and more symmetric PSFs.

Los estilos APA, Harvard, Vancouver, ISO, etc.

34

Severino, Clara y Ilídio Lopes. "Asteroseismology: Looking for Axions in the Red Supergiant Star Alpha Ori". Astrophysical Journal 943, n.º 2 (27 de enero de 2023): 95. http://dx.doi.org/10.3847/1538-4357/aca897.

Texto completo

Resumen

Abstract In this work, for the first time, we use seismic data as well as surface abundances to model the supergiant α-Ori, with the goal of setting an upper bound on the axion–photon coupling constant g a γ . We find that, in general, stellar models with g a γ ∈ [0.002; 2.0] × 10−10 GeV−1 agree with the observational data, but beyond that upper limit, we do not find stellar models that are compatible with the observational constraints and the current literature. From g a γ = 3.5 × 10−10 GeV−1 on, the algorithm did not find any fitting models. Even so, all the axionic models considered present distinct internal profiles from the reference case, without axions. Moreover, as the axion energy losses become more significant, the behavior of the stellar models becomes more diversified, even with very similar input parameters. Nonetheless, the consecutive increments of g a γ still show systematic tendencies, resulting from the axion energy losses. Moreover, we establish three important conclusions: (1) the increased luminosity and higher neutrino production are measurable effects, possibly associated with axion energy losses; (2) stellar models with axion energy loss show a quite distinct internal structure; and (3) the importance of future asteroseismic missions in observing low-degree nonradial modes in massive stars is emphasized—as internal gravity waves probe the near-core regions, where axion effects are most intense. Thus, more seismic data will allow us to constrain g a γ better and to prove or dismiss the existence of axion energy loss inside massive stars.

Los estilos APA, Harvard, Vancouver, ISO, etc.

35

Opher, M., J. F. Drake, G. Zank, E. Powell, W. Shelley, M. Kornbleuth, V. Florinski et al. "A Turbulent Heliosheath Driven by the Rayleigh–Taylor Instability". Astrophysical Journal 922, n.º 2 (1 de diciembre de 2021): 181. http://dx.doi.org/10.3847/1538-4357/ac2d2e.

Texto completo

Resumen

Abstract The heliosphere is the bubble formed by the solar wind as it interacts with the interstellar medium (ISM). The collimation of the heliosheath (HS) flows by the solar magnetic field in the heliotail into distinct north and south columns (jets) is seen in recent global simulations of the heliosphere. However, there is disagreement between the models about how far downtail the two-lobe feature persists and whether the ambient ISM penetrates into the region between the two lobes. Magnetohydrodynamic simulations show that these heliospheric jets become unstable as they move down the heliotail and drive large-scale turbulence. However, the mechanism that produces this turbulence had not been identified. Here we show that the driver of the turbulence is the Rayleigh–Taylor (RT) instability produced by the interaction of neutral H atoms streaming from the ISM with the ionized matter in the HS. The drag between the neutral and ionized matter acts as an effective gravity, which causes an RT instability to develop along the axis of the HS magnetic field. A density gradient exists perpendicular to this axis due to the confinement of the solar wind by the solar magnetic field. The characteristic timescale of the instability depends on the neutral H density in the ISM and for typical values the growth rate is ∼3 years. The instability destroys the coherence of the heliospheric jets and magnetic reconnection ensues, allowing ISM material to penetrate the heliospheric tail. Signatures of this instability should be observable in Energetic Neutral Atom maps from future missions such as the Interstellar Mapping and Acceleration Probe (IMAP). The turbulence driven by the instability is macroscopic and potentially has important implications for particle acceleration.

Los estilos APA, Harvard, Vancouver, ISO, etc.

36

Adam, R., M. Vannier, S. Maurogordato, A. Biviano, C. Adami, B. Ascaso, F. Bellagamba et al. "Euclid preparation". Astronomy & Astrophysics 627 (26 de junio de 2019): A23. http://dx.doi.org/10.1051/0004-6361/201935088.

Texto completo

Resumen

Galaxy cluster counts in bins of mass and redshift have been shown to be a competitive probe to test cosmological models. This method requires an efficient blind detection of clusters from surveys with a well-known selection function and robust mass estimates, which is particularly challenging at high redshift. The Euclid wide survey will cover 15 000 deg2 of the sky, avoiding contamination by light from our Galaxy and our solar system in the optical and near-infrared bands, down to magnitude 24 in the H-band. The resulting data will make it possible to detect a large number of galaxy clusters spanning a wide-range of masses up to redshift ∼2 and possibly higher. This paper presents the final results of the Euclid Cluster Finder Challenge (CFC), fourth in a series of similar challenges. The objective of these challenges was to select the cluster detection algorithms that best meet the requirements of the Euclid mission. The final CFC included six independent detection algorithms, based on different techniques, such as photometric redshift tomography, optimal filtering, hierarchical approach, wavelet and friend-of-friends algorithms. These algorithms were blindly applied to a mock galaxy catalog with representative Euclid-like properties. The relative performance of the algorithms was assessed by matching the resulting detections to known clusters in the simulations down to masses of M200 ∼ 1013.25 M⊙. Several matching procedures were tested, thus making it possible to estimate the associated systematic effects on completeness to < 3%. All the tested algorithms are very competitive in terms of performance, with three of them reaching > 80% completeness for a mean purity of 80% down to masses of 1014 M⊙ and up to redshift z = 2. Based on these results, two algorithms were selected to be implemented in the Euclid pipeline, the Adaptive Matched Identifier of Clustered Objects (AMICO) code, based on matched filtering, and the PZWav code, based on an adaptive wavelet approach.

Los estilos APA, Harvard, Vancouver, ISO, etc.

37

Klettas, Dimitris, Emma Alcock, Rafal Dworakowski, Philip MacCarthy y Mark Monaghan. "Is transnasal TEE imaging a viable alternative to conventional TEE during structural cardiac interventions to avoid general anaesthesia? A pilot comparison study of image quality". Echo Research and Practice 4, n.º 1 (marzo de 2017): 1–7. http://dx.doi.org/10.1530/erp-16-0029.

Texto completo

Resumen

Aim The role of transoesophageal echocardiography in cardiac interventional structural procedures is well established and appreciated. However, the need for general anaesthesia (GA) throughout the procedure remains a controversial issue. The aim of the present study is to assess the feasibility and imaging quality of using a transnasal microrobe that allows the usage of conscious sedation in patients who undergo cardiac structural interventional procedures without missing the benefits, guidance and navigation of conventional trans-procedural TEE. Methods We analysed the trans-procedural images of 24 consecutive patients who underwent TAVI, TMVI or ASD/PFO closure, using a transnasal 2D microprobe (PHILIPS) and then we compared them with images taken by using a conventional 3D TEE probe (PHILIPS). In particular, we compared the imaging quality of the two probes regarding: (1) The anatomy, visualisation of valvular calcification and transvalvular colour Doppler of the aortic and mitral valve; (2) the imaging quality of PFO, ASD and interatrial communication colour flow; (3) the imaging of left ventricle systolic function and pericardial space and (4) transgastric imaging. Results All images were graded with a scale from 5 to 1. The average grade of imaging quality in the mitral valve was: anatomy, 4.3; calcification, 3.8; colour Doppler, 4.2. The average grade of imaging quality in the aortic valve was: anatomy, 4.3; calcification, 3.7; colour Doppler, 4.3. The average grade of imaging quality in PFO/ASD was 4.3. The average grade of imaging quality in LV/pericardial space was 4.2. The average grade of imaging quality in transgastric imaging was 4.1. Conclusion These results suggest that transnasal TEE can provide good anatomical image quality of relevant cardiac structures during cardiac structural interventions and this may facilitate these procedures being performed during conscious sedation without having to lose TEE guidance.

Los estilos APA, Harvard, Vancouver, ISO, etc.

38

Retterer, J. M. y P. Roddy. "Faith in a seed: on the origins of equatorial plasma bubbles". Annales Geophysicae 32, n.º 5 (15 de mayo de 2014): 485–98. http://dx.doi.org/10.5194/angeo-32-485-2014.

Texto completo

Resumen

Abstract. Our faith in the seeds of equatorial plasma irregularities holds that there will generally always be density perturbations sufficient to provide the seeds for irregularity development whenever the Rayleigh–Taylor instability is active. When the duration of the time of the Rayleigh–Taylor instability is short, however, the magnitude of the seed perturbations can make a difference in whether the irregularities have a chance to grow to a strength at which the nonlinear development of plumes occurs. In addition, the character of the resulting irregularities reflects the characteristics of the initial seed density perturbation, e.g., their strength, spacing, and, to some extent, their spatial scales, and it is important to know the seeds to help determine the structure of the developed irregularities. To this end, we describe the climatology of daytime and early-evening density irregularities that can serve as seeds for later development of plumes, as determined from the Planar Langmuir Probe (PLP) plasma density measurements on the C/NOFS (Communication and Navigation Outage Forecast System) satellite mission, presenting their magnitude as a function of altitude, latitude, longitude, local time, season, and phase in the solar cycle (within the C/NOFS observation era). To examine some of the consequences of these density perturbations, they are used as initial conditions for the PBMOD PBMOD (Retterer, 2010a) 3-D irregularity model to follow their potential development into larger-amplitude irregularities, plumes, and radio scintillation. "Though I do not believe that a pla[sma bubble] will spring up where no seed has been, I have great faith in a seed. Convince me that you have a seed there, and I am prepared to expect wonders." – Henry David Thoreau

Los estilos APA, Harvard, Vancouver, ISO, etc.

39

Liu, N., S. B. Lambert, P. Charlot, Z. Zhu, J. C. Liu, N. Jiang, X. S. Wan y C. Y. Ding. "Comparison of multifrequency positions of extragalactic sources from ICRF3 and Gaia EDR3". Astronomy & Astrophysics 652 (agosto de 2021): A87. http://dx.doi.org/10.1051/0004-6361/202038179.

Texto completo

Resumen

Context. Comparisons of optical positions derived from the Gaia mission and radio positions measured by very long baseline interferometry (VLBI) probe the structure of active galactic nuclei (AGN) on the milliarcsecond scale. So far, these comparisons have focused on using the S∕X-band (2/8 GHz) radio positions, but did not take advantage of the VLBI positions that exist at higher radio frequencies, namely at K-band (24 GHz) and X∕Ka-band (8/32 GHz). Aims. We extend previous works by considering two additional radio frequencies (K-band and X∕Ka-band) with the aim to study the frequency dependence of the source positions and its potential connection with the physical properties of the underlying AGN. Methods. We compared the absolute source positions measured at four different wavelengths, that is, the optical position from the Gaia Early Data Release 3 (EDR3) and the radio positions at the S∕X-, K-, and X∕Ka-band, as available from the third realization of the International Celestial Reference Frame (ICRF3), for 512 common sources. We first aligned the three ICRF3 individual catalogs to the Gaia EDR3 frame and compared the optical-to-radio offsets before and after the alignment. Then we studied the correlation of optical-to-radio offsets with the observing (radio) frequency, source morphology, magnitude, redshift, and source type. Results. The deviation among optical-to-radio offsets determined in the different radio bands is less than 0.5 mas, but there is statistical evidence that the optical-to-radio offset is smaller at K-band compared to S∕X-band for sources showing extended structures. The optical-to-radio offset was found to statistically correlate with the structure index. Large optical-to-radio offsets appear to favor faint sources, but are well explained by positional uncertainty, which is also larger for these sources. We did not detect any statistically significant correlation between the optical-to-radio offset and the redshift. Conclusions. The radio source structure appears to be a major cause for the radio-to-optical offset. For the alignment of the Gaia celestial reference frame, the S∕X-band frame remains the preferred choice at present.

Los estilos APA, Harvard, Vancouver, ISO, etc.

40

Krüger, Harald, Peter Strub, Max Sommer, Nicolas Altobelli, Hiroshi Kimura, Ann-Kathrin Lohse, Eberhard Grün y Ralf Srama. "Helios spacecraft data revisited: detection of cometary meteoroid trails by following in situ dust impacts". Astronomy & Astrophysics 643 (noviembre de 2020): A96. http://dx.doi.org/10.1051/0004-6361/202038935.

Texto completo

Resumen

Context. Cometary meteoroid trails exist in the vicinity of comets, forming a fine structure of the interplanetary dust cloud. The trails consist predominantly of the largest cometary particles (with sizes of approximately 0.1 mm–1 cm), which are ejected at low speeds and remain very close to the comet orbit for several revolutions around the Sun. In the 1970s, two Helios spacecraft were launched towards the inner Solar System. The spacecraft were equipped with in situ dust sensors which measured the distribution of interplanetary dust in the inner Solar System for the first time. Recently, when re-analysing the Helios data, a clustering of seven impacts was found, detected by Helios in a very narrow region of space at a true anomaly angle of 135 ± 1°, which the authors considered as potential cometary trail particles. However, at the time, this hypothesis could not be studied further. Aims. We re-analyse these candidate cometary trail particles in the Helios dust data to investigate the possibility that some or all of them indeed originate from cometary trails and we constrain their source comets. Methods. The Interplanetary Meteoroid Environment for eXploration (IMEX) dust streams in space model is a new and recently published universal model for cometary meteoroid streams in the inner Solar System. We use IMEX to study the traverses of cometary trails made by Helios. Results. During ten revolutions around the Sun, the Helios spacecraft intersected 13 cometary trails. For the majority of these traverses the predicted dust fluxes are very low. In the narrow region of space where Helios detected the candidate dust particles, the spacecraft repeatedly traversed the trails of comets 45P/Honda-Mrkos-Pajdušáková and 72P/Denning-Fujikawa with relatively high predicted dust fluxes. The analysis of the detection times and particle impact directions shows that four detected particles are compatible with an origin from these two comets. By combining measurements and simulations we find a dust spatial density in these trails of approximately 10−8–10−7 m−3. Conclusions. The identification of potential cometary trail particles in the Helios data greatly benefited from the clustering of trail traverses in a rather narrow region of space. The in situ detection and analysis of meteoroid trail particles which can be traced back to their source bodies by spacecraft-based dust analysers provides a new opportunity for remote compositional analysis of comets and asteroids without the necessity to fly a spacecraft to or even land on those celestial bodies. This provides new science opportunities for future missions like DESTINY+ (Demonstration and Experiment of Space Technology for INterplanetary voYage with Phaethon fLyby and dUst Science), Europa Clipper, and the Interstellar Mapping and Acceleration Probe.

Los estilos APA, Harvard, Vancouver, ISO, etc.

41

Manninen, J., N. G. Kleimenova, A. Kozlovsky, I. A. Kornilov, L. I. Gromova, Y. V. Fedorenko y T. Turunen. "Strange VLF bursts in northern Scandinavia: case study of the afternoon "mushroom-like" hiss on 8 December 2013". Annales Geophysicae 33, n.º 8 (12 de agosto de 2015): 991–95. http://dx.doi.org/10.5194/angeo-33-991-2015.

Texto completo

Resumen

Abstract. We investigate a non-typical very low frequency (VLF) 1–4 kHz hiss representing a sequence of separated noise bursts with a strange "mushroom-like" shape in the frequency–time domain, each one lasting several minutes. These strange afternoon VLF emissions were recorded at Kannuslehto (KAN, &varphi; = 67.74° N, λ = 26.27° E; L ∼ 5.5) in northern Finland during the late recovery phase of the small magnetic storm on 8 December 2013. The left-hand (LH) polarized 2–3 kHz "mushroom caps" were clearly separated from the right-hand (RH) polarized "mushroom stems" at the frequency of about 1.8–1.9 kHz, which could match the lower ionosphere waveguide cutoff (the first transverse resonance of the Earth–ionosphere cavity). We hypothesize that this VLF burst sequence could be a result of the modulation of the VLF hiss electron–cyclotron instability from the strong Pc5 geomagnetic pulsations observed simultaneously at ground-based stations as well as in the inner magnetosphere by the Time History of Events and Macroscale Interactions during Substorms mission probe (THEMIS-E; ThE). This assumption is confirmed by a similar modulation of the intensity of the energetic (1–10 keV) electrons simultaneously observed by the same ThE spacecraft. In addition, the data of the European Incoherent Scatter Scientific Association (EISCAT) radar at Tromsø show a similar quasi-periodicity in the ratio of the Hall-to-Pedersen conductance, which may be used as a proxy for the energetic particle precipitation enhancement. Our findings suggest that this strange mushroom-like shape of the considered VLF hiss could be a combined mutual effect of the magnetospheric ULF–VLF (ultra low frequency–very low frequency) wave interaction and the ionosphere waveguide propagation.

Los estilos APA, Harvard, Vancouver, ISO, etc.

42

Fornasier, S., V. H. Hoang, P. H. Hasselmann, C. Feller, M. A. Barucci, J. D. P. Deshapriya, H. Sierks et al. "Linking surface morphology, composition, and activity on the nucleus of 67P/Churyumov-Gerasimenko". Astronomy & Astrophysics 630 (20 de septiembre de 2019): A7. http://dx.doi.org/10.1051/0004-6361/201833803.

Texto completo

Resumen

Aims. The Rosetta space probe accompanied comet 67P/Churyumov-Gerasimenko for more than two years, obtaining an unprecedented amount of unique data of the comet nucleus and inner coma. This has enabled us to study its activity almost continuously from 4 au inbound to 3.6 au outbound, including the perihelion passage at 1.24 au. This work focuses identifying the source regions of faint jets and outbursts and on studying the spectrophotometric properties of some outbursts. We use observations acquired with the OSIRIS/NAC camera during July–October 2015, that is, close to perihelion. Methods. We analyzed more than 2000 images from NAC color sequences acquired with 7–11 filters covering the 250–1000 nm wavelength range. The OSIRIS images were processed with the OSIRIS standard pipeline up to level 3, that is, converted in radiance factor, then corrected for the illumination conditions. For each color sequence, color cubes were produced by stacking registered and illumination-corrected images. Results. More than 200 jets of different intensities were identified directly on the nucleus. Some of the more intense outbursts appear spectrally bluer than the comet dark terrain in the visible-to-near-infrared region. We attribute this spectral behavior to icy grains mixed with the ejected dust. Some of the jets have an extremely short lifetime. They appear on the cometary surface during the color sequence observations, and vanish in less than some few minutes after reaching their peak. We also report a resolved dust plume observed in May 2016 at a resolution of 55 cm pixel−1, which allowed us to estimate an optical depth of ~0.65 and an ejected mass of ~2200 kg, assuming a grain bulk density of ~800 kg m−3. We present the results on the location, duration, and colors of active sources on the nucleus of 67P from the medium-resolution (i.e., 6–10 m pixel−1) images acquired close to perihelion passage. The observed jets are mainly located close to boundaries between different morphological regions. Some of these active areas were observed and investigated at higher resolution (up to a few decimeter per pixel) during the last months of operations of the Rosetta mission. Conclusions. These observations allow us to investigate the link between morphology, composition, and activity of cometary nuclei. Jets depart not only from cliffs, but also from smooth and dust-covered areas, from fractures, pits, or cavities that cast shadows and favor the recondensation of volatiles. This study shows that faint jets or outbursts continuously contribute to the cometary activity close to perihelion passage, and that these events are triggered byillumination conditions. Faint jets or outbursts are not associated with a particular terrain type or morphology.

Los estilos APA, Harvard, Vancouver, ISO, etc.

43

Sauvaud, J. A., P. Koperski, T. Beutier, H. Barthe, C. Aoustin, J. J. Thocaven, J. Rouzaud, E. Penou, O. Vaisberg y N. Borodkova. "The INTERBALL-Tail ELECTRON experiment: initial results on the low-latitude boundary layer of the dawn magnetosphere". Annales Geophysicae 15, n.º 5 (31 de mayo de 1997): 587–95. http://dx.doi.org/10.1007/s00585-997-0587-z.

Texto completo

Resumen

Abstract. The Toulouse electron spectrometer flown on the Russian project INTERBALL-Tail performs electron measurements from 10 to 26 000 eV over a 4<pi> solid angle in a satellite rotation period. The INTERBALL-Tail probe was launched on 3 August 1995 together with a subsatellite into a 65° inclination orbit with an apogee of about 30 RE. The INTERBALL mission also includes a polar spacecraft launched in August 1996 for correlated studies of the outer magnetosphere and of the auroral regions. We present new observations concerning the low-latitude boundary layers (LLBL) of the magnetosphere obtained near the dawn magnetic meridian. LLBL are encountered at the interface between two plasma regimes, the magnetosheath and the dayside extension of the plasma sheet. Unexpectedly, the radial extent of the region where LLBL electrons can be sporadically detected as plasma clouds can reach up to 5 RE inside the magnetopause. The LLBL core electrons have an average energy of the order of 100 eV and are systematically field-aligned and counterstreaming. As a trend, the temperature of the LLBL electrons increases with decreasing distance to Earth. Along the satellite orbit, the apparent time of occurrence of LLBL electrons can vary from about 5 to 20 min from one pass to another. An initial first comparison between electron- and magnetic-field measurements indicates that the LLBL clouds coincide with a strong increase in the magnetic field (by up to a factor of 2). The resulting strong magnetic field gradient can explain why the plasma-sheet electron flux in the keV range is strongly depressed in LLBL occurrence regions (up to a factor of \\sim10). We also show that LLBL electron encounters are related to field-aligned current structures and that wide LLBL correspond to northward interplanetary magnetic field. Evidence for LLBL/plasma-sheet electron leakage into the magnetosheath during southward IMF is also presented.

Los estilos APA, Harvard, Vancouver, ISO, etc.

44

Venuti, L., L. Prisinzano, G. G. Sacco, E. Flaccomio, R. Bonito, F. Damiani, G. Micela et al. "The Gaia-ESO Survey and CSI 2264: Substructures, disks, and sequential star formation in the young open cluster NGC 2264". Astronomy & Astrophysics 609 (22 de diciembre de 2017): A10. http://dx.doi.org/10.1051/0004-6361/201731103.

Texto completo

Resumen

Context. Reconstructing the structure and history of young clusters is pivotal to understanding the mechanisms and timescales of early stellar evolution and planet formation. Recent studies suggest that star clusters often exhibit a hierarchical structure, possibly resulting from several star formation episodes occurring sequentially rather than a monolithic cloud collapse. Aims. We aim to explore the structure of the open cluster and star-forming region NGC 2264 (~3 Myr), which is one of the youngest, richest and most accessible star clusters in the local spiral arm of our Galaxy; we link the spatial distribution of cluster members to other stellar properties such as age and evolutionary stage to probe the star formation history within the region. Methods. We combined spectroscopic data obtained as part of the Gaia-ESO Survey (GES) with multi-wavelength photometric data from the Coordinated Synoptic Investigation of NGC 2264 (CSI 2264) campaign. We examined a sample of 655 cluster members, with masses between 0.2 and 1.8 M⊙ and including both disk-bearing and disk-free young stars. We used Teff estimates from GES and g,r,i photometry from CSI 2264 to derive individual extinction and stellar parameters. Results. We find a significant age spread of 4–5 Myr among cluster members. Disk-bearing objects are statistically associated with younger isochronal ages than disk-free sources. The cluster has a hierarchical structure, with two main blocks along its latitudinal extension. The northern half develops around the O-type binary star S Mon; the southern half, close to the tip of the Cone Nebula, contains the most embedded regions of NGC 2264, populated mainly by objects with disks and ongoing accretion. The median ages of objects at different locations within the cluster, and the spatial distribution of disked and non-disked sources, suggest that star formation began in the north of the cluster, over 5 Myr ago, and was ignited in its southern region a few Myr later. Star formation is likely still ongoing in the most embedded regions of the cluster, while the outer regions host a widespread population of more evolved objects; these may be the result of an earlier star formation episode followed by outward migration on timescales of a few Myr. We find a detectable lag between the typical age of disk-bearing objects and that of accreting objects in the inner regions of NGC 2264: the first tend to be older than the second, but younger than disk-free sources at similar locations within the cluster. This supports earlier findings that the characteristic timescales of disk accretion are shorter than those of disk dispersal, and smaller than the average age of NGC 2264 (i.e., ≲3 Myr). At the same time, we note that disks in the north of the cluster tend to be shorter-lived (~2.5 Myr) than elsewhere; this may reflect the impact of massive stars within the region (notably S Mon), that trigger rapid disk dispersal. Conclusions. Our results, consistent with earlier studies on NGC 2264 and other young clusters, support the idea of a star formation process that takes place sequentially over a prolonged span in a given region. A complete understanding of the dynamics of formation and evolution of star clusters requires accurate astrometric and kinematic characterization of its population; significant advance in this field is foreseen in the upcoming years thanks to the ongoing Gaia mission, coupled with extensive ground-based surveys like GES.

Los estilos APA, Harvard, Vancouver, ISO, etc.

45

Duvoisin, R. M., D. J. Hayzer, D. Belin y J. C. Jaton. "A rabbit Ig lambda L chain C region gene encoding C21 allotopes." Journal of Immunology 141, n.º 5 (1 de septiembre de 1988): 1596–601. http://dx.doi.org/10.4049/jimmunol.141.5.1596.

Texto completo

Resumen

Abstract Southern blot analyses of germ-line DNA obtained from rabbits expressing lambda chains of C7 and/or C21 allotypes were performed with a rabbit C lambda region-specific probe; a 12-kbp EcoRI- and a 2-kbp BamHI-hybridizing fragment were detected only in the DNA from rabbits expressing the C21 allotype. The 12-kbp EcoRI fragment was cloned and shown to contain two C lambda region-encoding genes in the same orientation. Each is preceded by a J lambda gene segment. Nonamer-12-bp spacer-heptamer recombination signal sequences were found 5' of each J lambda segment, and splicing signals were identified at the 3' ends of the J lambda segments and the 5' ends of the corresponding C lambda genes. The C lambda 5 gene, which exhibits a sequence identical with that found in several cDNA clones, is carried by the 2-kbp BamHI fragment missing from the genomic DNA of rabbits which do not express the C21 allotype. The second C lambda gene, C lambda 6, lies 3' of C lambda 5, in a 1.6-kbp BamHI fragment which is present in genomic DNAs of all tested rabbits, irrespective of their phenotype. Its sequence is identical with that found in one cDNA clone and differs from that of C lambda 5 in 17 base positions resulting in four amino acid substitutions. A fragment of a cDNA, with a J-C region sequence identical with that encoded by the J lambda 5-C lambda 5 gene pair, was subcloned into a plasmid expression vector. The resulting polypeptide product could be specifically immunoprecipitated by anti-C21 but not anti-C7 alloantisera, showing that some, if not all, C21 allotopes are encoded by the C lambda 5 gene. In contrast, the C lambda 6 gene product was not precipitable, either by anti-C7 or by anti-C21 alloantisera, although it was readily immunoprecipitated by a goat anti-rabbit lambda chain antiserum.

Los estilos APA, Harvard, Vancouver, ISO, etc.

46

Mottram, J. C., H. Beuther, A. Ahmadi, P. D. Klaassen, M. T. Beltrán, T. Csengeri, S. Feng et al. "From clump to disc scales in W3 IRS4". Astronomy & Astrophysics 636 (abril de 2020): A118. http://dx.doi.org/10.1051/0004-6361/201834152.

Texto completo

Resumen

Context. High-mass star formation typically takes place in a crowded environment, with a higher likelihood of young forming stars affecting and being affected by their surroundings and neighbours, as well as links between different physical scales affecting the outcome. However, observational studies are often focused on either clump or disc scales exclusively. Aims. We explore the physical and chemical links between clump and disc scales in the high-mass star formation region W3 IRS4, a region that contains a number of different evolutionary phases in the high-mass star formation process, as a case-study for what can be achieved as part of the IRAM NOrthern Extended Millimeter Array (NOEMA) large programme named CORE: “Fragmentation and disc formation in high-mass star formation”. Methods. We present 1.4 mm continuum and molecular line observations with the IRAM NOEMA interferometer and 30 m telescope, which together probe spatial scales from ~0.3−20′′ (600−40 000 AU or 0.003−0.2 pc at 2 kpc, the distance to W3). As part of our analysis, we used XCLASS to constrain the temperature, column density, velocity, and line-width of the molecular emission lines. Results. The W3 IRS4 region includes a cold filament and cold cores, a massive young stellar object (MYSO) embedded in a hot core, and a more evolved ultra-compact (UC)H II region, with some degree of interaction between all components of the region that affects their evolution. A large velocity gradient is seen in the filament, suggesting infall of material towards the hot core at a rate of 10−3−10−4 M⊙ yr−1, while the swept up gas ring in the photodissociation region around the UCH II region may be squeezing the hot core from the other side. There are no clear indications of a disc around the MYSO down to the resolution of the observations (600 AU). A total of 21 molecules are detected, with the abundances and abundance ratios indicating that many molecules were formed in the ice mantles of dust grains at cooler temperatures, below the freeze-out temperature of CO (≲35 K). This contrasts with the current bulk temperature of ~50 K, which was obtained from H2CO. Conclusions. CORE observations allow us to comprehensively link the different structures in the W3 IRS4 region for the first time. Our results argue that the dynamics and environment around the MYSO W3 IRS4 have a significant impact on its evolution. This context would be missing if only high resolution or continuum observations were available.

Los estilos APA, Harvard, Vancouver, ISO, etc.

47

Langlois, M., R. Gratton, A. M. Lagrange, P. Delorme, A. Boccaletti, M. Bonnefoy, A. L. Maire et al. "The SPHERE infrared survey for exoplanets (SHINE)". Astronomy & Astrophysics 651 (julio de 2021): A71. http://dx.doi.org/10.1051/0004-6361/202039753.

Texto completo

Resumen

Context. In recent decades, direct imaging has confirmed the existence of substellar companions (exoplanets or brown dwarfs) on wide orbits (>10 au) around their host stars. In striving to understand their formation and evolution mechanisms, in 2015 we initiated the SPHERE infrared survey for exoplanets (SHINE), a systematic direct imaging survey of young, nearby stars that is targeted at exploring their demographics. Aims. We aim to detect and characterize the population of giant planets and brown dwarfs beyond the snow line around young, nearby stars. Combined with the survey completeness, our observations offer the opportunity to constrain the statistical properties (occurrence, mass and orbital distributions, dependency on the stellar mass) of these young giant planets. Methods. In this study, we present the observing and data analysis strategy, the ranking process of the detected candidates, and the survey performances for a subsample of 150 stars that are representative of the full SHINE sample. Observations were conducted in a homogeneous way between February 2015 and February 2017 with the dedicated ground-based VLT/SPHERE instrument equipped with the IFS integral field spectrograph and the IRDIS dual-band imager, covering a spectral range between 0.9 and 2.3 μm. We used coronographic, angular, and spectral differential imaging techniques to achieve the best detection performances for this study, down to the planetary mass regime. Results. We processed, in a uniform manner, more than 300 SHINE observations and datasets to assess the survey typical sensitivity as a function of the host star and of the observing conditions. The median detection performance reached 5σ-contrasts of 13 mag at 200 mas and 14.2 mag at 800 mas with the IFS (YJ and YJH bands), and of 11.8 mag at 200 mas, 13.1 mag at 800 mas, and 15.8 mag at 3 as with IRDIS in H band, delivering one of the deepest sensitivity surveys thus far for young, nearby stars. A total of sixteen substellar companions were imaged in this first part of SHINE: seven brown dwarf companions and ten planetary-mass companions.These include two new discoveries, HIP 65426 b and HIP 64892 B, but not the planets around PDS70 that had not been originally selected for the SHINE core sample. A total of 1483 candidates were detected, mainly in the large field of view that characterizes IRDIS. The color-magnitude diagrams, low-resolution spectrum (when available with IFS), and follow-up observations enabled us to identify the nature (background contaminant or comoving companion) of about 86% of our subsample. The remaining cases are often connected to crowded-field follow-up observations that were missing. Finally, even though SHINE was not initially designed for disk searches, we imaged twelve circumstellar disks, including three new detections around the HIP 73145, HIP 86598, and HD 106906 systems. Conclusions. Nowadays, direct imaging provides a unique opportunity to probe the outer part of exoplanetary systems beyond 10 au to explore planetary architectures, as highlighted by the discoveries of: one new exoplanet, one new brown dwarf companion, and three new debris disks during this early phase of SHINE. It also offers the opportunity to explore and revisit the physical and orbital properties of these young, giant planets and brown dwarf companions (relative position, photometry, and low-resolution spectrum in near-infrared, predicted masses, and contrast in order to search for additional companions). Finally, these results highlight the importance of finalizing the SHINE systematic observation of about 500 young, nearby stars for a full exploration of their outer part to explore the demographics of young giant planets beyond 10 au and to identify the most interesting systems for the next generation of high-contrast imagers on very large and extremely large telescopes.

Los estilos APA, Harvard, Vancouver, ISO, etc.

48

Loreggia, Davide, Silvano Fineschi, Gerardo Capobianco, Alessandro Bemporad, Marta Casti, Federico Landini, Gianalfredo Nicolini et al. "PROBA-3 mission and the Shadow Position Sensors: Metrology measurement concept and budget". Advances in Space Research, julio de 2020. http://dx.doi.org/10.1016/j.asr.2020.07.022.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

49

Wang, Yun, Massimo Robberto, Mark Dickinson, Lynne A. Hillenbrand, Wesley Fraser, Peter Behroozi, Jarle Brinchmann et al. "ATLAS probe: Breakthrough science of galaxy evolution, cosmology, Milky Way, and the Solar System". Publications of the Astronomical Society of Australia 36 (2019). http://dx.doi.org/10.1017/pasa.2019.5.

Texto completo

Resumen

AbstractAstrophysics Telescope for Large Area Spectroscopy Probe is a concept for a National Aeronautics and Space Administration probe-class space mission that will achieve ground-breaking science in the fields of galaxy evolution, cosmology, Milky Way, and the Solar System. It is the follow-up space mission to Wide Field Infrared Survey Telescope (WFIRST), boosting its scientific return by obtaining deep 1–4 μm slit spectroscopy for ∼70% of all galaxies imaged by the ∼2 000 deg2WFIRST High Latitude Survey atz> 0.5. Astrophysics Telescope for Large Area Spectroscopy will measure accurate and precise redshifts for ∼200 M galaxies out toz< 7, and deliver spectra that enable a wide range of diagnostic studies of the physical properties of galaxies over most of cosmic history. Astrophysics Telescope for Large Area Spectroscopy Probe and WFIRST together will produce a 3D map of the Universe over 2 000 deg2, the definitive data sets for studying galaxy evolution, probing dark matter, dark energy and modifications of General Relativity, and quantifying the 3D structure and stellar content of the Milky Way. Astrophysics Telescope for Large Area Spectroscopy Probe science spans four broad categories: (1) Revolutionising galaxy evolution studies by tracing the relation between galaxies and dark matter from galaxy groups to cosmic voids and filaments, from the epoch of reionisation through the peak era of galaxy assembly; (2) Opening a new window into the dark Universe by weighing the dark matter filaments using 3D weak lensing with spectroscopic redshifts, and obtaining definitive measurements of dark energy and modification of General Relativity using galaxy clustering; (3) Probing the Milky Way’s dust-enshrouded regions, reaching the far side of our Galaxy; and (4) Exploring the formation history of the outer Solar System by characterising Kuiper Belt Objects. Astrophysics Telescope for Large Area Spectroscopy Probe is a 1.5 m telescope with a field of view of 0.4 deg2, and uses digital micro-mirror devices as slit selectors. It has a spectroscopic resolution ofR= 1 000, and a wavelength range of 1–4 μm. The lack of slit spectroscopy from space over a wide field of view is the obvious gap in current and planned future space missions; Astrophysics Telescope for Large Area Spectroscopy fills this big gap with an unprecedented spectroscopic capability based on digital micro-mirror devices (with an estimated spectroscopic multiplex factor greater than 5 000). Astrophysics Telescope for Large Area Spectroscopy is designed to fit within the National Aeronautics and Space Administration probe-class space mission cost envelope; it has a single instrument, a telescope aperture that allows for a lighter launch vehicle, and mature technology (we have identified a path for digital micro-mirror devices to reach Technology Readiness Level 6 within 2 yr). Astrophysics Telescope for Large Area Spectroscopy Probe will lead to transformative science over the entire range of astrophysics: from galaxy evolution to the dark Universe, from Solar System objects to the dusty regions of the Milky Way.

Los estilos APA, Harvard, Vancouver, ISO, etc.

50

Raouafi, N. E., L. Matteini, J. Squire, S. T. Badman, M. Velli, K. G. Klein, C. H. K. Chen et al. "Parker Solar Probe: Four Years of Discoveries at Solar Cycle Minimum". Space Science Reviews 219, n.º 1 (febrero de 2023). http://dx.doi.org/10.1007/s11214-023-00952-4.

Texto completo

Resumen

AbstractLaunched on 12 Aug. 2018, NASA’s Parker Solar Probe had completed 13 of its scheduled 24 orbits around the Sun by Nov. 2022. The mission’s primary science goal is to determine the structure and dynamics of the Sun’s coronal magnetic field, understand how the solar corona and wind are heated and accelerated, and determine what processes accelerate energetic particles. Parker Solar Probe returned a treasure trove of science data that far exceeded quality, significance, and quantity expectations, leading to a significant number of discoveries reported in nearly 700 peer-reviewed publications. The first four years of the 7-year primary mission duration have been mostly during solar minimum conditions with few major solar events. Starting with orbit 8 (i.e., 28 Apr. 2021), Parker flew through the magnetically dominated corona, i.e., sub-Alfvénic solar wind, which is one of the mission’s primary objectives. In this paper, we present an overview of the scientific advances made mainly during the first four years of the Parker Solar Probe mission, which go well beyond the three science objectives that are: (1) Trace the flow of energy that heats and accelerates the solar corona and solar wind; (2) Determine the structure and dynamics of the plasma and magnetic fields at the sources of the solar wind; and (3) Explore mechanisms that accelerate and transport energetic particles.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Artículos de revistas sobre el tema "PROBA-3 space mission"

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros