Literatura académica sobre el tema "PRISMATIC ELEMENT"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "PRISMATIC ELEMENT".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "PRISMATIC ELEMENT"
Klochkov, Yu V., A. P. Nikolaev, O. V. Vakhnina y M. Yu Klochkov. "Finit element model of pipeline discretization by prismatic elements". IOP Conference Series: Materials Science and Engineering 698 (18 de diciembre de 2019): 066012. http://dx.doi.org/10.1088/1757-899x/698/6/066012.
Texto completoGong, Jian, John L. Volakis y Helen T. G. Wang. "Efficient finite element simulation of slot antennas using prismatic elements". Radio Science 31, n.º 6 (noviembre de 1996): 1837–44. http://dx.doi.org/10.1029/96rs02423.
Texto completoLEUNG, A. Y. T. y B. ZHU. "HEXAHEDRAL FOURIER p-ELEMENTS FOR VIBRATION OF PRISMATIC SOLIDS". International Journal of Structural Stability and Dynamics 04, n.º 01 (marzo de 2004): 125–38. http://dx.doi.org/10.1142/s0219455404001100.
Texto completoGhesmi, Mahdi y Bettar Ould el Moctar. "Application of contact elements to represent prismatic mechanical couplings". MATEC Web of Conferences 272 (2019): 01028. http://dx.doi.org/10.1051/matecconf/201927201028.
Texto completoDharma, Adrian Pramudita y Bambang Suryoatmono. "Non-Linear Buckling Analysis of Axially Loaded Column with Non-Prismatic I-Section". Journal of the Civil Engineering Forum 5, n.º 3 (18 de septiembre de 2019): 263. http://dx.doi.org/10.22146/jcef.47607.
Texto completoMaksymiuk, Yurii, Andrii Kozak, Ivan Martyniuk y Oleksandr Maksymiuk. "Features of derivation of formulas for calculation of nodal reactions and coefficients of matrix of rigidity of a finite element with averaged mechanical and geometrical parameters". Building constructions. Theory and Practice, n.º 8 (29 de noviembre de 2021): 97–108. http://dx.doi.org/10.32347/2522-4182.8.2021.97-108.
Texto completoCoulomb, J. L., F. X. Zgainski y Y. Marechal. "A pyramidal element to link hexahedral, prismatic and tetrahedral edge finite elements". IEEE Transactions on Magnetics 33, n.º 2 (marzo de 1997): 1362–65. http://dx.doi.org/10.1109/20.582509.
Texto completoBai, Rui, Si-Wei Liu, Siu-Lai Chan y Feng Yu. "Flexural Buckling Strength of Tapered-I-Section Steel Columns Based on ANSI/AISC-360-16". International Journal of Structural Stability and Dynamics 19, n.º 11 (23 de octubre de 2019): 1950134. http://dx.doi.org/10.1142/s0219455419501347.
Texto completoIvanchenko, Grigory, Yurii Maksimyuk, Andriy Kozak y Ivan Martyniuk. "CONSTRUCTION OF SOLVING EQUATIONS OF SEMI-ANALYTICAL METHOD OF FINISHED ELEMENTS FOR PRISMATIC BODIES OF COMPLEX SHAPE". Management of Development of Complex Systems, n.º 46 (24 de junio de 2021): 55–62. http://dx.doi.org/10.32347/2412-9933.2021.46.55-62.
Texto completoSuprun, T. T. "LOCAL APPROACH FOR EVALUATING HEAT TRANSFER OF PRISMATIC ELEMENTS ON A FLAT SURFACE". Eurasian Physical Technical Journal 18, n.º 3 (37) (24 de septiembre de 2021): 43–47. http://dx.doi.org/10.31489/2021no3/43-47.
Texto completoTesis sobre el tema "PRISMATIC ELEMENT"
Vijayakar, Sandeep M. "Finite element methods for quasi-prismatic bodies with application to gears /". The Ohio State University, 1987. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487335992904337.
Texto completoWalker, B. D. "A combined finite strip/finite element method for the analysis of partially prismatic thin-walled structures". Thesis, University of Southampton, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.375679.
Texto completoDia, Mouhamadou. "Hexahedral and prismatic solid-shell for nonlinear analysis of thin and medium-thick structures". Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI040.
Texto completoThin or medium-thick structures are naturally present in most power generation facilities: reactor building, pressurized pipelines, metal tanks or tarpaulins, reactor vessel, metal liners of containment chambers, to name but a few. A need currently expressed by EDF's engineering units is the modeling of the blistering phenomena of metal liners in reactor facilities. A liner is a metal sheet type structure that provides the impermeability function of nuclear power plants. Its modeling requires taking into account a contact-friction phenomenon causing pinching on the shell, plasticity under the effect of blistering and geometric nonlinearity (buckling type instability). To model the thermo-mechanical behavior of such a structure, the finite elements of plates and shells currently available do not seem to be up to the task. The first limitation attributable to these elements is the assumption of plane stresses which prevents the consideration of some natively three-dimensional constitutive laws. Secondly, due to their formulation with rotational degrees of freedom these elements do not offer facility of use when solving problems that take into account non-linear effects such as large geometric transformations, bi-facial friction-contact, buckling and following pressures. An alternative would be to use standard volume elements. However, the prohibitive computing cost of the latter is difficult to access for many industrial applications. The aim of this work is to propose a solution to this problem. We have proposed a solid-shell finite element formulation enriched in their pinching stress and strain and capable of reproducing accurately the behaviour of thin structures. This new finite element works with any type of three-dimensional behaviour law without restriction on stress fields. It can also be used for all types of mechanical problems: linear and nonlinear, frictional contact, large transformation, buckling, displacement-dependent pressure, etc. The numerical simulations carried out show satisfactory performances
Truscott, Simon. "A heterogenous three-dimensional computational model for wood drying". Thesis, Queensland University of Technology, 2004. https://eprints.qut.edu.au/15960/1/Simon_Trustcott_Thesis.pdf.
Texto completoTruscott, Simon. "A heterogenous three-dimensional computational model for wood drying". Queensland University of Technology, 2004. http://eprints.qut.edu.au/15960/.
Texto completoLi, Weibing. "Prismatic modular robotics enabled through active and passive elements". Thesis, University of Leeds, 2018. http://etheses.whiterose.ac.uk/20112/.
Texto completoEvcimen, Taylan Ulas. "The Effect Of Prismatic Roughness Elemnts On Hydraulic Jump". Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12605792/index.pdf.
Texto completoWinder, Brian Geoffrey. "Achieving Complex Motion with Fundamental Components for Lamina Emergent Mechanisms". Diss., CLICK HERE for online access, 2008. http://contentdm.lib.byu.edu/ETD/image/etd2279.pdf.
Texto completoBANSAL, ABHISHEK. "INFLUENCE OF SHAPE FACTOR OF PRISMATIC ELEMENT ON THE ENERGY OF RAYLEIGH WAVES". Thesis, 2019. http://dspace.dtu.ac.in:8080/jspui/handle/repository/16965.
Texto completoMacho, Gabriele A., D. Shimizu y I. R. Spears. "The effect of prism orientation and loading direction on contact stresses in prismatic enamel: implications for interpreting wear patterns". 2005. http://hdl.handle.net/10454/3551.
Texto completoThe ability of prisms to effectively dissipate contact stress at the surface will influence wear rates in teeth. The aim of this investigation was to begin to quantify the effect of prism orientation on surface stresses. Seven finite element models of enamel microstructure were created, each model differing in the angulation of prism orientation with regard to the wear surface. For validation purposes, the mechanical behavior of the model was compared with published experimental data. In order to test the enamel under lateral loads, a compressed food particle was dragged across the surface from the dentino-enamel junction (DEJ) towards the outer enamel surface (OES). Under these conditions, tensile stresses in the enamel model increased with increases in the coefficient of friction. More importantly, stresses were found to be lowest in models in which the prisms approach the surface at lower angles (i.e., more obliquely cut prisms), and highest when the prisms approached the surface at 60° (i.e., less obliquely cut). Finally, the direction of travel of the simulated food particle was reversed, allowing comparison of the difference in behavior between trailing and leading edge enamels (i.e., when the food particle was dragged either towards or away from the DEJ). Stresses at the trailing edge were usually lower than stresses at the leading edge. Taken together with what is known about prism orientation in primate teeth, such findings imply greater wear resistance at the intercuspal region and less wear resistance at the lateral enamel at midcrown. Such findings appear to be supported by archeological evidence.
Libros sobre el tema "PRISMATIC ELEMENT"
Hu, Yandong. Electrokinetic transport in microchannels with three-dimensional prismatic elements on the surface. 2005.
Buscar texto completoCapítulos de libros sobre el tema "PRISMATIC ELEMENT"
Oñate, Eugenio. "Prismatic Structures. Finite Strip and Finite Prism Methods". En Structural Analysis with the Finite Element Method Linear Statics, 675–728. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-1-4020-8743-1_11.
Texto completoHinton, Ernest, Johann Sienz y Mustafa Özakça. "Basic Finite Element Formulation for Shells of Revolution". En Analysis and Optimization of Prismatic and Axisymmetric Shell Structures, 127–40. London: Springer London, 2003. http://dx.doi.org/10.1007/978-0-85729-424-1_4.
Texto completoHinton, Ernest, Johann Sienz y Mustafa Özakça. "Basic Finite Element Formulation for Vibrating Axisymmetric Shells". En Analysis and Optimization of Prismatic and Axisymmetric Shell Structures, 245–78. London: Springer London, 2003. http://dx.doi.org/10.1007/978-0-85729-424-1_7.
Texto completoChaudhury, Arkadeep Narayan, Arnab Ghosh, Krishnendu Banerjee, Abhijit Mondal y Debasis Datta. "Analysis of Prismatic Springs of Non-circular Coil Shape Using Finite Element Method". En Lecture Notes in Mechanical Engineering, 243–51. New Delhi: Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2740-3_24.
Texto completoFontenla-Carrera, Gabriel, Ángel Manuel Fernández Vilán y Pablo Izquierdo Belmonte. "Automatic Identification of Kinematic Diagrams with Computer Vision". En Proceedings of the XV Ibero-American Congress of Mechanical Engineering, 425–31. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-38563-6_62.
Texto completoEslami, M. Reza. "Torsion of Prismatic Bars". En Finite Elements Methods in Mechanics, 229–36. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-08037-6_11.
Texto completoCuomo, M., A. Greco y M. Romano. "Eigenfrequencies Estimates for Structures with Non-Prismatic Elements". En Numerical Treatment of Eigenvalue Problems Vol.4 / Numerische Behandlung von Eigenwertaufgaben Band 4, 62–76. Basel: Birkhäuser Basel, 1987. http://dx.doi.org/10.1007/978-3-0348-7507-3_6.
Texto completo"Prismatic Pentahedron T9: Assumed Displacement Distribution". En Finite Element Structural Analysis: New Concepts, 99–105. Reston ,VA: American Institute of Aeronautics and Astronautics, 2009. http://dx.doi.org/10.2514/5.9781563479991.0099.0105.
Texto completo"Prismatic Pentahedron T10: Assumed Displacement Distribution plus Corrective Distribution Inside the Element Boundaries". En Finite Element Structural Analysis: New Concepts, 107–17. Reston ,VA: American Institute of Aeronautics and Astronautics, 2009. http://dx.doi.org/10.2514/5.9781563479991.0107.0117.
Texto completo"10 MOHR CIRCLE OF STRESS WHEN A PRISMATIC ELEMENT IS SUBJECTED TO NORMAL AND SHEAR STRESSES". En Geotechnical Engineering, 289. CRC Press, 2002. http://dx.doi.org/10.1201/9781482275858-137.
Texto completoActas de conferencias sobre el tema "PRISMATIC ELEMENT"
Pedreiro, Marcelo R. de Matos, Rogério de O. Rodrigues, Maicon Marino Albertini y Jefferson S. Camacho. "EXPLICIT STIFFNESS MATRIX FOR PARABOLIC PRISMATIC TRIANGULAR ELEMENT". En 10th World Congress on Computational Mechanics. São Paulo: Editora Edgard Blücher, 2014. http://dx.doi.org/10.5151/meceng-wccm2012-20360.
Texto completoDwarshuis, Koen, Ronald Aarts, Marcel Ellenbroek y Dannis Brouwer. "A Non-Prismatic Beam Element for the Optimization of Flexure Mechanisms". En ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22242.
Texto completoAl-Bedoor, B. O. y Y. A. Khulief. "Finite Element Dynamic Modeling of Elastic Beam With Prismatic Joint". En ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0080.
Texto completoCosby, Austin y Ernesto Gutierrez-Miravete. "Finite Element Analysis Conversion Factors for Natural Vibrations of Beams". En ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-37261.
Texto completoYamaguchi, Tadashi, Yoshihiro Kawase, Shunsuke Hori y Yoshiki Iwai. "3-D parallel finite element method with prismatic edge elements for dynamic analysis of electromagnets". En 2015 18th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2015. http://dx.doi.org/10.1109/icems.2015.7385179.
Texto completoMigliaccio, G. "Stress and strain fields in non-prismatic inhomogeneous beams". En AIMETA 2022. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902431-27.
Texto completoMocera, Francesco, Elena Vergori y Aurelio Soma. "Finite element versus experimental Thermo-mechanical behaviour of prismatic Li-Ion cell". En 2019 Fourteenth International Conference on Ecological Vehicles and Renewable Energies (EVER). IEEE, 2019. http://dx.doi.org/10.1109/ever.2019.8813653.
Texto completoAmor-Martin, Adrian, Daniel Garcia-Donoro y Luis E. Garcia-Castillo. "Analysis of dispersion error of higher-order curl-conforming prismatic finite element". En 2017 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization for RF, Microwave, and Terahertz Applications (NEMO). IEEE, 2017. http://dx.doi.org/10.1109/nemo.2017.7964234.
Texto completoSitaram, Pattabhi, Bipin Pai y Rachel Mok. "Elasto-Plastic Analysis of Prismatic Folded Plates by the Finite Element Method". En ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88195.
Texto completoPandya, S. y M. Hafez. "A finite-element approach for modeling inviscid and viscous compressible flows using prismatic grids". En 14th Computational Fluid Dynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1999. http://dx.doi.org/10.2514/6.1999-3310.
Texto completoInformes sobre el tema "PRISMATIC ELEMENT"
Beckett-Brown, C. E., A. M. McDonald y M. B. McClenaghan. Discovering a porphyry deposit using tourmaline: a case study from Yukon. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331349.
Texto completo