Libros sobre el tema "Primary Heat Transfer System"

Whitehouse, Adrian Paul. Heat transfer fluid in an industrial process refrigeration system. Birmingham: University of Birmingham, 1991.

C, Civinskas Kestutis, United States. National Aeronautics and Space Administration. y U.S. Army Research Laboratory., eds. Two-dimensional Navier-Stokes heat transfer analysis for rough turbine blades system. [Washington, DC: National Aeronautics and Space Administration, 1991.

Boyle, Robert J. Two-dimensional Navier-Stokes heat transfer analysis for rough turbine blades system. [Washington, DC: National Aeronautics and Space Administration, 1991.

Boyle, Robert J. Two-dimensional Navier-Stokes heat transfer analysis for rough turbine blades system. [Washington, DC: National Aeronautics and Space Administration, 1991.

Boyle, Robert J. Two-dimensional Navier-Stokes heat transfer analysis for rough turbine blades system. [Washington, DC: National Aeronautics and Space Administration, 1991.

Clements, Joseph A. Heat transfer performance of a roof-spray cooling system employing the transfer function method. Springfield, Va: Available from the National Technical Information Service, 1993.

Delil, A. A. M. Test loops for two-phase thermal management system components. Amsterdam, Netherlands: National Aerospace Laboratory, 1990.

Heat transfer: Thermal management of electronics. Boca Raton: Taylor & Francis, 2010.

Abdul-Aziz, Ali. Effects of cooling system parameters on heat transfer in PAFC stack. [Washington, DC: National Aeronautics and Space Administration, 1985.

Heald, Edward E. Heat transfer: User guide for revision 5.1 : notes and exercises. Houston, PA (P.O. Box 65, Johnson Rd., Houston 15342-0065): ANSYS, 1995.

D, Quinn Robert, Gong Leslie y United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Finite-element reentry heat-transfer analysis of space shuttle orbiter. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1987.

D, Quinn Robert, Gong Leslie y United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Finite-element reentry heat-transfer analysis of space shuttle orbiter. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1987.

Ko, William L. Finite-element reentry heat-transfer analysis of space shuttle orbiter. Edwards, Calif: Dryden Flight Research Facility, 1986.

United States. National Aeronautics and Space Administration., ed. The embodiment design of the heat rejection system for the portable life support system. [Washington, DC: National Aeronautics and Space Administration, 1994.

Center, NAHB Research. Enerjoy case study: An evaluation of thermal comfort and energy consumption for the Energyjoy radiant panel heating system. Upper Marlboro, MD: NAHB Research Center, 1994.

Centre, Bhabha Atomic Research, ed. Characterisation of girth pipe weld for primary heat transport system of pressurised heavy water reactors. Mumbai: Bhabha Atomic Research Centre, 2002.

(Firm), VBB Allen. Feasibility of energy recovery for heat pump-assisted district heating & cooling from the Metro Renton wastewater treatment plant and effluent transfer system: Phase 2 report. Salem, Or: VBB Allen, 1986.

S, Zakany James y United States. National Aeronautics and Space Administration., eds. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket heat transfer and combustion measurements. [Washington, D.C: National Aeronautics and Space Administration, 1996.

Peck, Lindamae. Heat transfer and frost-thaw penetration in soil surrounding an inclusion of sand: Numerical model results relevant to electromagnetic sensor system performance. [Hanover, N.H]: US Army Corps of Engineers, Cold Regions Research & Engineering Laboratory, 1995.

Peck, Lindamae. Heat transfer and frost-thaw penetration in soil surrounding an inclusion of sand: Numerical model results relevant to electromagnetic sensor system performance. [Hanover, N.H]: US Army Corps of Engineers, Cold Regions Research & Engineering Laboratory, 1995.

Peck, Lindamae. Heat transfer and frost-thaw penetration in soil surrounding an inclusion of sand: Numerical model results relevant to electromagnetic sensor system performance. [Hanover, N.H]: US Army Corps of Engineers, Cold Regions Research & Engineering Laboratory, 1995.

United States. National Aeronautics and Space Administration., ed. Effects of the cooling system parameters on heat transfer and performance of the PAFC stack during transient operation. [Cleveland, Ohio]: Cleveland State University, 1992.

United States. National Aeronautics and Space Administration., ed. Effects of the cooling system parameters on heat transfer and performance of the PAFC stack during transient operation. [Cleveland, Ohio]: Cleveland State University, 1992.

Delil, A. A. M. Sensors for a system to control the liquid flow into an evaporative cold plate of a two-phase heat transport system for large spacecraft. Amsterdam: National Aerospace Laboratory, 1986.

S, Zakany James y United States. National Aeronautics and Space Administration., eds. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket heat transfer and combustion measurements. [Washington, D.C: National Aeronautics and Space Administration, 1996.

United States. National Aeronautics and Space Administration., ed. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket engine calorimeter heat transfer measurements and analysis. [Washington, D.C.]: National Aeronautics and Space Administration, 1997.

Cavanagh, James Edward. Development of a high resolution, high heat transfer coolant system for the process control of cold strip rolling mills. Poole: Dorset Institute of Higher Education and Davy McKee (Poole) Ltd, 1985.

N, Assanis Dennis, United States. Dept. of Energy. Office of Vehicle and Engine Research and Development. y United States. National Aeronautics and Space Administration., eds. A Computer simulation of the turbocharged turbocompounded Diesel engine system: A description of the thermodynamic and heat transfer models. Washington, D.C: U.S. Dept. of Energy, Conservation and Renewable Energy, Office of Vehicle and Engine R&D, 1986.

H, Knoll Richard y United States. National Aeronautics and Space Administration., eds. Thermal performance of a liquid hydrogen tank multilayer insulation system at warm boundary temperatures of 630, 530 and 152⁰ R. [Washington, D.C.]: National Aeronautics and Space Administration, 1991.

Kveton, O. K. ITER cooling system: Analysis of heat transfer media, operation and safety of cooling loop and blanket during conditioning and baking. Toronto: Ontario Hydro, 1990.

United States. National Aeronautics and Space Administration., ed. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket engine calorimeter heat transfer measurements and analysis. [Washington, D.C.]: National Aeronautics and Space Administration, 1997.

S, Zakany James y United States. National Aeronautics and Space Administration., eds. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket combustion experiments. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

C, Ku Jerry y United States. National Aeronautics and Space Administration., eds. Brief communication: Soot volume fraction maps for normal and reduced gravity laminar acetylene jet diffusion flames. [Washington, DC: National Aeronautics and Space Administration, 1997.

C, Ku Jerry y United States. National Aeronautics and Space Administration., eds. Brief communication: Soot volume fraction maps for normal and reduced gravity laminar acetylene jet diffusion flames. [Washington, DC: National Aeronautics and Space Administration, 1997.

C, Ku Jerry y United States. National Aeronautics and Space Administration., eds. Brief communication: Buoyancy-induced differences in soot morphology. [Washington, DC: National Aeronautics and Space Administration, 1995.

Sigidov, Yuriy, Elena Kalashnikova y Tat'yana Horol'skaya. Primary accounting documentation. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1077324.

S, Zakany James y United States. National Aeronautics and Space Administration., eds. Metallized gelled propellants: Oxygen/RP-1/aluminum rocket combustion experiments. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Gilberto Francisco Martha de Souza. Thermal Power Plant Performance Analysis. London: Springer London, 2012.

Desideri, Umberto, Giampaolo Manfrida y Enrico Sciubba, eds. ECOS 2012. Florence: Firenze University Press, 2012. http://dx.doi.org/10.36253/978-88-6655-322-9.

Heat transfer: User guide for revision 5.0. Houston, PA: Swanson Analysis Systems, 1993.

Shabany, Younes. Heat Transfer: Thermal Management of Electronics. Taylor & Francis Group, 2009.

Shabany, Younes. Heat Transfer: Thermal Management of Electronics. Taylor & Francis Group, 2009.

Finite-element reentry heat-transfer analysis of space shuttle orbiter. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1987.

Internal thermal control system hose heat transfer fluid thermal expansion evaluation test report. Marshall Space Flight Center, Ala: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 2001.

Rezk, A. M. A. Heat and Fluid Flow in Power System Components: Hmt the Science and Applications of Heat and Mass Transfer. Elsevier Science & Technology Books, 2013.

Finney, Mark, Sara McAllister, Torben Grumstrup y Jason Forthofer. Wildland Fire Behaviour. CSIRO Publishing, 2021. http://dx.doi.org/10.1071/9781486309092.

Design and test of a compact optics system for the pool boiling experiment. [Washington, D.C.]: NASA, 1990.

X-34 experimental aeroheating at Mach 6 and 10. Reston, VA: American Institute of Aeronautics and Astronautics, 1998.

Analysis of advanced solid rocket motor ignition phenomena: Final report. [Washington, DC: National Aeronautics and Space Administration, 1995.

Gilberto Francisco Martha de Souza. Thermal Power Plant Performance Analysis. Springer, 2014.