Literatura académica sobre el tema "Polymer tip"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Polymer tip".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "Polymer tip"
Latorre, R., A. Muller, J. Y. Billard y A. Houlier. "Investigation of the Role of Polymer on the Delay of Tip Vortex Cavitation". Journal of Fluids Engineering 126, n.º 5 (1 de septiembre de 2004): 724–29. http://dx.doi.org/10.1115/1.1792260.
Texto completoEngler, Anthony, Jared Schwartz y Paul Kohl. "(Student Award, 1st Place, Invited) Rapid Nanometer Scale Patterning Using New High-Sensitivity, Dry-Develop Resists". ECS Meeting Abstracts MA2022-02, n.º 18 (9 de octubre de 2022): 867. http://dx.doi.org/10.1149/ma2022-0218867mtgabs.
Texto completoHan, Chung-Souk, Seyed H. R. Sanei y Farid Alisafaei. "On the origin of indentation size effects and depth dependent mechanical properties of elastic polymers". Journal of Polymer Engineering 36, n.º 1 (1 de enero de 2016): 103–11. http://dx.doi.org/10.1515/polyeng-2015-0030.
Texto completoKing, William P. y Kenneth E. Goodson. "Thermomechanical Formation of Nanoscale Polymer Indents With a Heated Silicon Tip". Journal of Heat Transfer 129, n.º 11 (15 de enero de 2007): 1600–1604. http://dx.doi.org/10.1115/1.2764088.
Texto completoOKAWA, Yuji, Daisuke TAKAJO y Masakazu AONO. "Polymer Nanowires Fabricated Using a Tip". Kobunshi 56, n.º 6 (2007): 436. http://dx.doi.org/10.1295/kobunshi.56.436.
Texto completoFruman, D. H. y S. S. Aflalo. "Tip Vortex Cavitation Inhibition by Drag-Reducing Polymer Solutions". Journal of Fluids Engineering 111, n.º 2 (1 de junio de 1989): 211–16. http://dx.doi.org/10.1115/1.3243625.
Texto completoDonescu, Dan, Sever Serban, Kristiana Gosa y Cristian Petcu. "Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process". Open Chemistry 3, n.º 1 (1 de marzo de 2005): 10–27. http://dx.doi.org/10.2478/bf02476234.
Texto completoKlapperich, C., K. Komvopoulos y L. Pruitt. "Nanomechanical Properties of Polymers Determined From Nanoindentation Experiments". Journal of Tribology 123, n.º 3 (25 de julio de 2000): 624–31. http://dx.doi.org/10.1115/1.1330736.
Texto completoHosseini, Nahid, Matthias Neuenschwander, Oliver Peric, Santiago H. Andany, Jonathan D. Adams y Georg E. Fantner. "Integration of sharp silicon nitride tips into high-speed SU8 cantilevers in a batch fabrication process". Beilstein Journal of Nanotechnology 10 (29 de noviembre de 2019): 2357–63. http://dx.doi.org/10.3762/bjnano.10.226.
Texto completoVacher, Robin y Astrid S. de Wijn. "Nanoscale friction and wear of a polymer coated with graphene". Beilstein Journal of Nanotechnology 13 (14 de enero de 2022): 63–73. http://dx.doi.org/10.3762/bjnano.13.4.
Texto completoTesis sobre el tema "Polymer tip"
Xie, Shaoxiong. "COMPARATIVE STUDY ON TIP/TIA/ZRP/TEOS MODIFIED EPOXIDES RESIN: ANTI-CORROSION PERFORMANCE". University of Akron / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=akron1534159109126582.
Texto completoAgapov, Rebecca L. "Advanced Scanning Probe Techniques for the Study of Polymer Surfaces". University of Akron / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=akron1352922649.
Texto completoRice, Reginald H. "Atomic force microscopy studies of thermal, mechanical and velocity dependent wear of thin polymer films". Thesis, Kansas State University, 2012. http://hdl.handle.net/2097/14955.
Texto completoDepartment of Physics
Robert Szoszkiewicz
Nanoscale modifications of polymer surfaces by scratching them with sharp tips with curvature radii of tens of nanometers and at variable temperatures are expected to provide wealth of information characterizing wear response of these polymers. Such studies are important in the light of understanding the nanoscale behavior of matter for future applications in advanced polymer coatings. This thesis describes how Atomic Force Microscopy (AFM) and hot-tip AFM (HT-AFM) methods were used to characterize thermal and mechanical properties of a 30 nm thick film of poly(styrene-block-ethylene oxide), PS-b-PEO, and modify its lamellar surface patterns. Additionally, it is revealed how contact AFM and HT-AFM methods can efficiently characterize the wear response of two popular polymer surfaces, poly(methyl methacrylate), PMMA, and polystyrene, PS. The AFM and HT-AFM studies on PS-b-PEO copolymer were aimed at producing spatial alignment of respective PS and PEO parts. Instead, however, surface ripples were obtained. These measurements are explained using mode I crack propagation model and stick-and-slip behavior of an AFM tip. In addition, HT-AFM studies allowed extraction of several thermo-physical properties of a PS-b-PEO film at local volumes containing about 30 attograms of a polymer. These thermo-physical quantities are: PEO melting enthalpy of, 111 ± 88 J g[superscript]-1, PS-b-PEO local specific heat of 3.6 ± 2.7 J g[superscript]-1K[superscript]-1, and molecular free energy of Helmholtz of 10[superscript]-20 J nm[superscript]-2 for the PEO within PS-b-PEO. Utilizing a spiral scan pattern at constant angular speed and at various temperatures at the AFM tip-polymer interfaces, the wear response of PS and PMMA polymers was characterized. Cross-sections along the obtained spiral wear patterns provided plots of polymer corrugation as a function of scanning speed. From these studies it was found that the corrugation of the modified polymer surface decays exponentially with linear velocity of the scanning tip.
Hazra, Sumit Kumar. "Crazing and yielding in polyethylene under impact". Thesis, Imperial College London, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.369223.
Texto completoLeón, Albiter Noel. "On the fracture behavior of ductile polymer films : notch quality, essential work of fracture, J-integral, and crack tip opening displacement". Doctoral thesis, Universitat Politècnica de Catalunya, 2018. http://hdl.handle.net/10803/565501.
Texto completoLos materiales poliméricos poseen un amplio rango de aplicaciones. Su habilidad de adquirir múltiples formas hace posible obtener películas de polímero, las cuales son altamente usadas en industrias como la de alimentos y productos farmacéuticos. La caracterización de dichas películas de polímero usando propiedades mecánicas clásicas se encuentra bien definido; sin embargo, este no es el caso con las propiedades a fractura. El objetivo general de este trabajo fue analizar en detalle el comportamiento a fractura de películas de polímero dúctiles mediante la aplicación de los enfoques adecuados de la mecánica de la fractura. La primera parte de la tesis investiga las relaciones existentes entre el trabajo esencial específico de fractura, el valor de la integral J de iniciación del crecimiento de la grieta y el desplazamiento crítico para la apertura de la punta de la grieta, ademas de encontrar pruebas claras que hacen al trabajo esencial específico de fractura la energía específica necesaria para el crecimiento de grieta, es decir, un valor de iniciación. Para hacer esto, se aplicó la técnica de correlación de imágenes digitales a probetas de doble entalla sometidas a tracción. Esta técnica permite medir el desplazamiento y la longitud de ligamento al mismo tiempo, lo que hace posible que el trabajo esencial de fractura, la integral J y el desplazamiento de apertura en la punta de la grieta se puedan realizar en un único conjunto de probetas de doble entalla sometidas a tracción. La segunda parte de la tesis se centró en analizar la influencia de la calidad de la entalla en el comportamiento a la fractura. La preparación de la muestra, particularmente la técnica de agudización empleada en la entalla, se ha estudiado con mas profundidad. Con el propósito de ver la influencia del procedimiento de agudización de la entalla, se han utilizado varias técnicas, entre las que se incluyen la ablación con láser de femtosegundo, agudización con cuchilla de afeitar sobre muestras a temperatura ambiente y congeladas con nitrógeno líquido, entallas realizadas con corte de sierra, entallas realizadas con corte de sierra deformadas plásticamente, agudización con bisturí y agujeros taladrados usados como entallas. los resultados revelaron que todas las entallas agudizadas con femtolaser eran muy consistentes y agudas, sin deformación plástica en frente de la punta de la grieta. En cambio, la técnica con cuchilla de afeitar produjo grietas muy agudas, tan agudas como las del femtolaser, pero diferencias en la fuerza compresiva usada por parte del operador al momento de aplicar la técnica, generó entallas con diferentes niveles de deformación plástica por delante de la punta de la grieta. Ya que las diferentes técnicas de agudización producen diferentes niveles de deformación plástica en la punta de la grieta, también se esperarían diferencias en la forma y el tamaño de la curvas tensión - desplazamiento. En la tercera parte de la tesis, la forma y el tamaño de curvas tensión - desplazamiento de especímenes que fueron entallados de diversas maneras fueron analizadas con el objetivo de clarificar su comportamiento a fractura. También, en la región de propagación se identifica la forma parabólica de las curvas tensión - desplazamiento, la cual modelada relaciona el trabajo especifico no esencial de fractura con la tensión de iniciación de crecimiento de grieta y la razón de extensión durante el crecimiento de grieta
Pham, Thi Nhung. "Fabry-Perot interferometer based on end-of-fiber polymer microtip for chemical sensing". Electronic Thesis or Diss., Bordeaux, 2024. http://www.theses.fr/2024BORD0006.
Texto completoFabry−Perot interferometers (FPIs) have received a significant attention for their use in sensor applications. FPIs consist of an optical cavity with separate parallel reflecting surfaces which reflect incident light, resulting in an optical interferometric signal. The FPI signal depends on the distance between the reflecting surfaces and the refractive index of the cavity medium, which are sensitive to variation of environment humidity, temperature, pressure, and material. FPIs can be attached to optical fibers to form compact fiber optic FPI-based sensors in which the optical fiber works as a waveguide for both incident and reflected signal. This thesis presents FPI-based chemical sensors incorporating a polymer microtip located at the end of an optical fiber and characterizes their sensing capabilities for humidity, water, and chemical targets.Firstly, we develop a pentaerythritol triacrylate (PETA) tip on the facet of an optical fiber by a self-guiding photopolymerization. One end of the optical fiber is placed inside a PETA droplet and the self-guiding photopolymerization of PETA is actuated by a 375 nm laser injected to the other end of the fiber. The optimal conditions to form a straight and mechanically stable PETA tip are 1.0 μW of laser power × 1.0 second of exposure time. However, the PETA chains do not completely polymerize during this self-polymerization, leading to an unstable dynamic resonant frequency of the tip. Thus, the tip needs a post-polymerization under a UV 365 nm lamp to achieve a stable dynamic characteristic, which is applicable for further sensing applications.Secondly, we demonstrate the PETA tip as an effective sensor to detect humidity. The PETA tip acts as an optical cavity formed between the fiber-core/PETA and the PETA/environment interface, resulting in a clear interferometric signal. The FPI signal of the tip is highly sensitive to humidity in the air. This is due to hydroxyl groups within the PETA structure, which strongly absorb water molecules in the humid air and significantly swell the tip. The length and/or the refractive index of the tip are therefore changed, resulting in a FPI shift. The tip exhibits a consistent sensitivity of 90pm/%RH, equivalent to a relative sensitivity of 104 ppm/%RH in the humidity range from 30 to 80%. The sensing performance is highly reproducible and stable. Furthermore, the cross effect of the temperature is negligible, indicating a great practical potential for the devices.Next, we apply the FPI-based PETA tips to determine the water content in glycerol and ethylene glycol solutions. The FPI signal of the PETA tip shifts nonlinearly towards longer wavelengths as the water content increases from 0 to 100 wt.%. The shift in the FPI signal occurs due to the contraction in the tip length, which is linked to the loss of water inside the PETA structure caused by the hydrophilic solutions. When the water contamination is below 10 wt.%, the tip shows a sensitivity of 394 pm/wt.% and 226 pm/wt.% for glycerol and ethylene glycol solutions, respectively. Therefore, the FPI-based PETA tip shows a great potential in determining water content in hydrophilic aqueous solutions, including hydrocarbons.Finally, a tip consisting of a PETA core and a shell of molecularly imprinted polymers (MIPs) is developed for detecting Dansyl-L-phenylalanine. The PETA tip is initially fabricated using the self-guiding polymerization and MIPs are then copolymerized to form a thin shell layer around the PETA tip. Upon the selective binding of Dansyl-L-phenylalanine, the refractive index of the MIP layer changes, leading to the change in the FPI signal of the whole PETA/MIP tip. This straightforward and affordable method offers new innovative possibilities for creating FPI-based MIP fiber optic sensors, which can be applied for a wide range of analytes, including both non-fluorescent and fluorescent targets
Shi, Xian [Verfasser] y Achim [Akademischer Betreuer] Hartschuh. "Tip-enhanced near-field optical microscopy of single-walled carbon nanotube/polymer conjugates and improvements of the image contrast / Xian Shi ; Betreuer: Achim Hartschuh". München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2017. http://d-nb.info/1151447404/34.
Texto completoBarrios, Carlos A. "Modified Scanning Probes for the Analysis of Polymer Surfaces". University of Akron / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=akron1249315424.
Texto completoSolomão, Zenaide. "Desenvolvimento e caracterização de compósitos de Poli (E-Caprolactona) PCL e ß-Fosfato Tricálcico (ß-TCP) para uso em biomateriais". [s.n.], 2011. http://repositorio.unicamp.br/jspui/handle/REPOSIP/263534.
Texto completoDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica
Made available in DSpace on 2018-08-17T22:38:20Z (GMT). No. of bitstreams: 1 Solomao_Zenaide_M.pdf: 4852275 bytes, checksum: e8aeb44e410022a37476432c0111160d (MD5) Previous issue date: 2011
Resumo: A utilização de biomateriais para substituir, reparar tecidos e órgãos lesados dos seres humanos tem aumentado muito ultimamente devido a diversos fatores como o crescimento da população e a sua maior expectativa de vida. A engenharia tecidual é um campo interdisciplinar que integra princípios da biologia celular e molecular, química, genética, ciências dos materiais e engenharia biomédica, para produzir compósitos tridimensionais inovativos, capazes de substituir tecidos biológicos. O desenvolvimento de novo biomaterial pode ajudar a solucionar este problema, utilizando o método de evaporação de solvente. Este trabalho teve como objetivos: sintetizar e caracterizar o ß-TCP através do método via seca; desenvolver e caracterizar as membranas de poli ('epsilon'-caprolactona) densas e porosas (scaffolds) utilizando dois solventes; preparar e caracterizar os compósitos densos e porosos PCL/ß-TCP; fazer uma avaliação da biocompatibilidade in vitro desses materiais. As seguintes técnicas de caracterização foram utilizadas: MO, MEV, EDS, DRX, TGA,DSC, ensaios mecânicos de tração, teste de viabilidade celular e atividade de fosfatase alcalina. Foi também analisada a sua degradação hidrolitica em solução tampão fosfato (PBS). Essas técnicas foram adequadas para diferenciar as amostras preparadas com os dois solventes utilizados: clorofórmio e diclorometano. Os ensaios mostraram que o último forneceu amostras mais resistentes mecanicamente, mantendo as propriedades térmicas do PCL puro sem alterações, com a adição das partículas do ß-TCP. A biocompatibilidade foi analisada através das normas conhecidas (ASTM e ABNT) e foi possível concluir que os materiais confeccionados são biocompativeis e a atividade de fosfatase alcalina (ALP) favoreceu o crescimento celular na membrana porosa. As avaliações in vitro não mostraram mudanças significativas nas composições preparadas com o solvente clorofórmio. Os materiais estudados possuem um grande potencial para aplicação em substitutos do tecido ósseo
Abstract: The use of biomaterials to replace, repair damaged tissues and organs of humans has greatly increased lately due to various factors such as population growth and greater life expectancy. Tissue engineering is an interdisciplinary field that incorporates principles of molecular and cellular biology, chemistry, genetics, materials science and biomedical engineering to produce innovative three-dimensional composites, capable of replacing tissue. The development of new biomaterial can help solutions this problem by using on whole of evaporation of solvent. This work aimed to synthesize and characterize the ß-TCP by the dry method; develop and characterize the membranes of poly ('épsilon'-caprolactone) porous and dense (scaffolds) using two solvents, to prepare and characterize the dense and porous PCL composites / ß-TCP, perform an evaluation of in vitro biocompatibility of these materials. The following characterization techniques were used: OM, SEM, EDS, XRD, TGA, DSC, mechanical testing, testing cell viability, alkaline phosphatase activity. We also analyzed its hydrolytic degradation in phosphate buffer solution (PBS). These techniques were adequate to differentiate the samples prepared with two solvents used, chloroform and dichloromethane. The tests showed that the samples provided last more mechanically resistant, keeping the thermal properties of pure PCL unchanged with the addition of particles of ß-TCP. The biocompatibility was determined by known standards (ASTM and ABNT) and we can conclude that the materials are biocompatible and made (ALP), promoted cell growth in the porous membrane. The in vitro evaluations showed no significant changes in the compositions prepared with the solvent chloroform. The materials studied have a great potential for application in bone tissue substitutes
Mestrado
Materiais e Processos de Fabricação
Mestre em Engenharia Mecânica
Liang, Wenfeng. "Metal Organic Composites Derived Tin Dioxide/C Nanoparticles For Sodium-Ion Battery". University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1460304081.
Texto completoLibros sobre el tema "Polymer tip"
Shilo, A. E. Oksidopolimernye materialy matrichnogo tipa. Kiev: Nauk. dumka, 1989.
Buscar texto completoFriesen, Christi. Down under: Tips, techniques, inspirational ramblings, creative nudgings and step-by-step instructions to help you create. Tehachapi, CA: CF Books, 2008.
Buscar texto completoMorales, Wilfredo. Infrared analysis of vapor phase deposited tricresylphosphate (TCP). [Washington, DC]: National Aeronautics and Space Administration, 1994.
Buscar texto completoMorales, Wilfredo. Infrared analysis of vapor phase deposited tricresylphosphate (TCP). [Washington, DC]: National Aeronautics and Space Administration, 1994.
Buscar texto completoBlay, Vincent, Luis Francisco Bobadilla y Alejandro Cabrera, eds. Zeolites and Metal-Organic Frameworks. NL Amsterdam: Amsterdam University Press, 2018. http://dx.doi.org/10.5117/9789462985568.
Texto completoBernd, Lauke y Mai Y. W. 1946-, eds. Science and engineering of short fibre reinforced polymers composites. Oxford: Woodhead Publishing, 2009.
Buscar texto completoFriesen, Christi. Birds of a feather: Tips, techniques, inspirational ramblings, creative nudging and step-by-step instructions to help you create [focal beads sculptures pins]. Tecachapi, Calif: CF Books, 2009.
Buscar texto completoV, Bazarov B., ed. Problemnye regiony resursnogo tipa: Aziatskai︠a︡ chastʹ Rossii. Novosibirsk: Izd-vo Sibirskogo otd-nii︠a︡ Rossiĭskoĭ akademii nauk, 2005.
Buscar texto completoReid, Malcolm. Diy Sculpting Characters with Polymer Clay: Simple Tip and Techniques to Sculpting Characters for Beginners. Independently Published, 2021.
Buscar texto completoWarren, Kristina. Polymer Clay for Beginners: Tips for Working with Polymer Clay for Kids. Independently Published, 2022.
Buscar texto completoCapítulos de libros sobre el tema "Polymer tip"
Fruman, D. H., D. Bismuth y S. Aflalo. "Effect of Polymer Solutions on Tip Vortex Cavitation". En The Influence of Polymer Additives on Velocity and Temperature Fields, 399–410. Berlin, Heidelberg: Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-82632-0_31.
Texto completoCreton, Costantino. "Fracture of polymer interfaces: Interfacial structure and crack tip plasticity". En Adhesive Joints: Formation, Characteristics and Testing, 49–60. London: CRC Press, 2023. http://dx.doi.org/10.1201/9780429070709-3.
Texto completoGooch, Jan W. "Tip-Sheared Carpet". En Encyclopedic Dictionary of Polymers, 751. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11902.
Texto completoGooch, Jan W. "Hot-Tip-Gate Molding". En Encyclopedic Dictionary of Polymers, 372. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_6059.
Texto completoGooch, Jan W. "TCP". En Encyclopedic Dictionary of Polymers, 731. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11582.
Texto completoGooch, Jan W. "Tap-Out". En Encyclopedic Dictionary of Polymers, 730. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11563.
Texto completoGooch, Jan W. "Tie Bar". En Encyclopedic Dictionary of Polymers, 750. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11877.
Texto completoGooch, Jan W. "Tie Back". En Encyclopedic Dictionary of Polymers, 750. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11878.
Texto completoGooch, Jan W. "Tie Coat". En Encyclopedic Dictionary of Polymers, 750. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11879.
Texto completoGooch, Jan W. "Tin Stabilizer". En Encyclopedic Dictionary of Polymers, 751. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11894.
Texto completoActas de conferencias sobre el tema "Polymer tip"
Xiong, Cong, Changrui Liao, Meng Zhu, Zongsong Gan y Yiping Wang. "Fiber-tip polymer microcantilever for hydrogen sensing". En Asia Communications and Photonics Conference. Washington, D.C.: OSA, 2020. http://dx.doi.org/10.1364/acpc.2020.s3i.1.
Texto completozeng, xin hua, Wei Luo, Cheng Chen, Shouguo Zheng, Shizhuang Weng, Miao Li, Zede Zhu et al. "Laser-oriented growth of long polymer tip for scanning optical applications". En Asia Communications and Photonics Conference. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/acp.2013.aw3d.1.
Texto completoZeng, Xinhua, Wei Luo, Cheng Chen, Shouguo Zheng, Shizhuang Weng, Miao Li, Zede Zhu et al. "Laser-oriented growth of long polymer tip for scanning optical applications". En Asia Communications and Photonics Conference. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/acpc.2013.aw3d.1.
Texto completoDong, Bo, Senpeng Zhang, Zongyu Chen, Pofeng Lin y Wobin Huang. "A Relative Humidity Sensor with a Fiber Tip All-Polymer Microcavity". En 2023 21st International Conference on Optical Communications and Networks (ICOCN). IEEE, 2023. http://dx.doi.org/10.1109/icocn59242.2023.10236312.
Texto completoKing, William P., Juan G. Santiago, Thomas W. Kenny y Kenneth E. Goodson. "Modeling and Prediction of Sub-Micrometer Heat Transfer During Thermomechanical Data Storage". En ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0324.
Texto completoAhuja, Suresh. "Interface and Dynamic Indentation of Crosslinked Polyester Films". En ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67693.
Texto completoMalakooti, Mohammad H. y Henry A. Sodano. "Fracture Modeling of an Embedded Crack in Self-Healing Polymers". En ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/smasis2012-8103.
Texto completoKhalili, Nazanin, Yu-Chen Sun, Hani E. Naguib y Roy H. Kwon. "Multiobjective Optimization of Trilayer Polypyrrole Conducting Polymer Actuators". En ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/smasis2013-3105.
Texto completoShahinpoor, Mohsen. "Electrically Controllable Deformations in Ionic Polymer Metal Composite Actuators". En ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-39037.
Texto completoHsu, Quang-Cherng, Chien-Liang Lin y Te-Hua Fang. "Study on Nanoimprint Lithography of the Polymer Chains (CH2)n With Anti-Adhesion Layer on Stamp by Molecular Dynamics Method". En ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2008. http://dx.doi.org/10.1115/icnmm2008-62172.
Texto completo