Libros sobre el tema "Physico-Mechanical and hygro-Thermal properties"

Marghussian, V. K. Thermo-mechanical properties of ceramic fibres. Carnforth, Lancashire, England: Parthenon Press, 1986.

Menard, Kevin Peter. Dynamic mechanical analysis: A practical introduction. Boca Raton, Fla: CRC Press, 1999.

David, Porter. Group interaction modelling of polymer properties. New York: M. Dekker, 1995.

Taya, Minoru. Metal matrix composites: Thermomechanical behavior. Oxford: Pergamon, 1989.

Liu, Wei. Thermische Stabilität und mechanische Eigenschaften quasikristalliner Legierungen. Düsseldorf: VDI, 1993.

J, Arsenault R., ed. Metal matrix composites: Thermomechanical behavior. Oxford, England: Pergamon Press, 1989.

McManus, Hugh L. N., 1958-, Bowles Kenneth J y Lewis Research Center, eds. Mechanical properties of degraded PMR-15 resin. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

A, Schneider Gerold, Petzow G, North Atlantic Treaty Organization. Scientific Affairs Division. y NATO Advanced Research Workshop on the Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics (1992 : Munich, Germany), eds. Thermal shock and thermal fatigue behavior of advanced ceramics. Dordrecht: Kluwer Academic Publishers, 1993.

M, Steen y Lohr R. D, eds. Ultra high temperature mechanical testing. Cambridge: Woodhead, 1995.

Campbell, Christian X. Databook on mechanical and thermophysical properties of particulate-reinforced ceramic matrix composites. West Lafayette, IN: Ceramics Information Analysis Center, Center for Information and Numerical Data Analysis and Synthesis, Purdue University, 1995.

Campbell, Christian X. Databook on mechanical and thermophysical properties of fiber-reinforced ceramic matrix composites. West Lafayette, IN: Ceramic Information Analysis Center, Center for Information and Numerical Data Analysis and Synthesis, Purdue University, 1997.

M, Kennedy John, Moeller Helen H. 1954-, Johnson W. S, ASTM Committee D-30 on High Modulus Fibers and Their Composites. y ASTM Committee E-24 on Fracture Testing., eds. Thermal and mechanical behavior of metal matrix and ceramic matrix composites. Philadelphia, PA: ASTM, 1990.

Ji xie re bian xing li lun ji ying yong: Theory and application of mechanical thermal deformation. Beijing Shi: Guo fang gong ye chu ban she, 2009.

Jenkins, Michael G., Edgar Lara-Curzio y Stephen T. Gonczy. Mechanical, thermal, and environmental testing and performance of ceramic composites and components. West Conshohocken, PA: ASTM, 2000.

1958-, Jenkins Michael G., Lara-Curzio Edgar 1963-, Gonczy Stephen T. 1947- y Symposium on Environmental, Mechanical, and Thermal Properties and Performance of Continuous Fiber Ceramic Composite (CFCC) Materials and Components (1999 : Seattle, Wash.), eds. Mechanical, thermal, and environmental testing and performance of ceramic composites and components. West Conshohocken, PA: ASTM, 2000.

Barton, James. Le verre, science et technologie. Les Ulis: EDP sciences, 2005.

Combette, Patrick. Physique des polymères. Montréal, QC: Presse internationales Polytechnique, 2005.

Mehrdad, Negahban, American Society of Mechanical Engineers. Applied Mechanics Division. y Joint ASME Applied Mechanics and Materials Summer Meeting (1995 : Los Angeles, Calif.), eds. Current research in the thermo-mechanics of polymers in the rubbery-glassy range, 1995: Presented at the 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, Los Angeles, California, June 28-30, 1995. New York, N.Y: American Society of Mechanical Engineers, 1995.

F, Jones W., Whitney James Martin 1936-, American Society of Mechanical Engineers. Aerospace Division., American Society of Mechanical Engineers. Applied Mechanics Division. y American Society of Mechanical Engineers. Winter Meeting, eds. Advances in experimental mechanics and biomimetics: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York: ASME, 1992.

Menard, Kevin P. Dynamic Mechanical Analysis. London: Taylor and Francis, 2008.

S, Misra M. y Langley Research Center, eds. Measurement of mechanical and thermophysical properties of dimensionally stable materials for space applications. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Murray, David. Thermal and mechanical properties of silicone elastomers in composite part manufacture. Salford: University of Salford, 1987.

Nouri, Mohammad Razavi. Thermal and mechanical properties of polypropylene, metallocene polyethylenes and their blends. Birmingham: University of Birmingham, 2002.

International, ASM y ebrary Inc, eds. Parametric analyses of high-temperature data for aluminum alloys. Materials Park, Ohio: ASM International, 2008.

American Society of Mechanical Engineers. Winter Meeting. Thermal effects on structures and materials: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, Texas, November 25-30, 1990. New York, N.Y: The Society, 1990.

Bin, Yang y Fu Yong Qing, eds. Polyurethane shape memory polymers. Boca Raton: Taylor & Francis, 2012.

United States. National Aeronautics and Space Administration., ed. Interfacial effects on the thermal and mechanical properties of graphite/copper composites. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Dynamic mechanical analysis: A practical introduction. Boca Raton, FL: CRC Press, 2008.

Thermodynamic properties of solids: Experiment and modeling. Weinheim: Wiley-VCH, 2010.

ASME international steam tables for industrial use: Based on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam (IAPWS-IF97). New York, N.Y: ASME, 2014.

T, Parry William, ed. ASME international steam tables for industrial use: Based on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam (IAPWS-IF97). New York, N.Y: American Society of Mechanical Engineers, 2000.

Simitses, George J. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading. [Washington, DC]: National Aeronautics and Space Administration, 1991.

United States. National Aeronautics and Space Administration., ed. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading. [Washington, DC: National Aeronautics and Space Administration, 1987.

Simitses, George J. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading. [Washington, DC]: National Aeronautics and Space Administration, 1991.

Simitses, George J. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading. [Washington, DC: National Aeronautics and Space Administration, 1987.

Mechanics of Porous Media Summer School (1994 Aussois, France). Mechanics of porous media: Lecture notes of the Mechanics of Porous Media Summer School, June 1994. Rotterdam: A.A. Balkema, 1995.

A, Charlez Philippe, ed. Mechanics of porous media. Rotterdam: A.A. Balkema, 1995.

American Society of Mechanical Engineers. Winter Meeting. Heat transfer in superconducting equipment: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York, N.Y: American Society of Mechanical Engineers, 1992.

M, Michal Gary y United States. National Aeronautics and Space Administration., eds. Mechanical and thermal properties of two Cu-Cr-Nb alloys and NARloy-Z. [Washington, DC: National Aeronautics and Space Administration, 1996.

T, Thynell S., Emery A. F, American Society of Mechanical Engineers. Heat Transfer Division. y International Mechanical Engineering Congress and Exposition (1994 : Chicago, Ill.), eds. Heat transfer in thin films: Presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, N.Y: American Society of Mechanical Engineers, 1994.

Khalil, Salem Ismail. Thermal and mechanical properties of crystalline polyesters poly(ethylene terephthalate) and poly(butylene terephthalate). Birmingham: University of Birmingham, 1985.

American Society of Mechanical Engineers. Winter Meeting. Temperature/fluid measurements in electronic equipment: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 13-18, 1987. New York, N.Y. (345 E. 47th St., New York 10017): ASME, 1987.

K, Liaw P., Nicholas T, Metallurgical Society (U.S.). Mechanical Metallurgy Committee. y Metallurgical Society (U.S.). Phase Transformation Committee., eds. Effects of load and thermal histories on mechanical behavior of materials: Proceedings of a symposium sponsored by the Mechanical Metallurgy and the Phase Transformation Committees of TMS-AIME, held at the 1987 TMS-AIME Annual Meeting in Denver, Colorado, February 22-26, 1987. Warrendale, Pa: Metallurgical Society, 1987.

Richard, Riff y United States. National Aeronautics and Space Administration., eds. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading: A semi-annual status report. [Washington, DC: National Aeronautics and Space Administration, 1989.

Richard, Riff y United States. National Aeronautics and Space Administration., eds. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading: A semi-annual status report. [Washington, DC: National Aeronautics and Space Administration, 1989.

American Society of Mechanical Engineers. Winter Meeting. Computerized thermophysical property packages: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York, N.Y: American Society of Mechanical Engineers, 1992.

Kazantzis, Antonios Vasileiou. Thermal stability, mechanical properties and deformation microstructures of the laves phase Cr[inferior two]Nb. Birmingham: University of Birmingham, 1999.

Mitchell, M. R. (Michael R.), 1941- editor of compilation, Smith, Stephen W. (Stephen William), 1965- editor of compilation, Woods, Terry, 1960- editor of compilation, Berg, Brian, 1958- editor of compilation y ASTM International, eds. Fatigue and fracture of medical metallic materials and devices. West Conshohocken, PA: ASTM International, 2014.

Fisher, David. Mechanical Properties of MAX Phases. Materials Research Forum LLC, 2021. http://dx.doi.org/10.21741/9781644901274.

Fisler, Diana, Marcin Pazera y ASTM Committee C-16 on Thermal Insulation Staff. Performance, Properties, and Resiliency of Thermal Insulations. American Society for Testing & Materials, 2021.