Literatura académica sobre el tema "Photo-electrochemical cells"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Photo-electrochemical cells".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "Photo-electrochemical cells"
Djellal, L., A. Bouguelia, M. Kadi Hanifi y M. Trari. "Bulk p-CuInSe2 photo-electrochemical solar cells". Solar Energy Materials and Solar Cells 92, n.º 5 (mayo de 2008): 594–600. http://dx.doi.org/10.1016/j.solmat.2007.08.007.
Texto completoSingh, R. P. y S. L. Singh. "Electrodeposited semiconducting CuInSe2films. II. Photo-electrochemical solar cells". Journal of Physics D: Applied Physics 19, n.º 9 (14 de septiembre de 1986): 1759–69. http://dx.doi.org/10.1088/0022-3727/19/9/020.
Texto completo., Bachu Naveen Kumar. "ZNO AND ZNO/PBS HETEROJUNCTION PHOTO ELECTROCHEMICAL CELLS". International Journal of Research in Engineering and Technology 04, n.º 07 (25 de julio de 2015): 464–67. http://dx.doi.org/10.15623/ijret.2015.0407074.
Texto completoTenholt, Carmen, Daniel Höche, Mauricio Schieda y Thomas Klassen. "Design of a reference model for fast optimization of photo-electrochemical cells". Sustainable Energy & Fuels 6, n.º 6 (2022): 1489–98. http://dx.doi.org/10.1039/d1se01671g.
Texto completoBeaver, Kevin y Shelley D. Minteer. "Probing Carboxylate Anolytes for Photo-Biofuel Cells through Combination of Bioinformatics and Electrochemistry". ECS Meeting Abstracts MA2022-01, n.º 43 (7 de julio de 2022): 1851. http://dx.doi.org/10.1149/ma2022-01431851mtgabs.
Texto completoBhadra, C. U., D. Henry Raja y D. Jonas Davidson. "Electrochemical Anodization and Characterization of Titanium Oxide Nanotubes for Photo Electrochemical Cells". Journal of Physics: Conference Series 2070, n.º 1 (1 de noviembre de 2021): 012073. http://dx.doi.org/10.1088/1742-6596/2070/1/012073.
Texto completoAgarwal, M. K. y G. H. Yousefi. "Photo-electrochemical solar cells using mixed transition metal dichalcogenide single crystal photo-electrodes". Crystal Research and Technology 24, n.º 10 (octubre de 1989): K179—K182. http://dx.doi.org/10.1002/crat.2170241021.
Texto completoLiu, Yuqing, Shuai Zhang, Stephen Beirne, Kyuman Kim, Chunyan Qin, Yumeng Du, Yuetong Zhou, Zhenxiang Cheng, Gordon Wallace y Jun Chen. "Wearable Photo‐Thermo‐Electrochemical Cells (PTECs) Harvesting Solar Energy". Macromolecular Rapid Communications 43, n.º 6 (3 de febrero de 2022): 2200001. http://dx.doi.org/10.1002/marc.202200001.
Texto completoLu, Lu, Waltteri Vakki, Jeffery A. Aguiar, Chuanxiao Xiao, Katherine Hurst, Michael Fairchild, Xi Chen, Fan Yang, Jing Gu y Zhiyong Jason Ren. "Unbiased solar H2 production with current density up to 23 mA cm−2 by Swiss-cheese black Si coupled with wastewater bioanode". Energy & Environmental Science 12, n.º 3 (2019): 1088–99. http://dx.doi.org/10.1039/c8ee03673j.
Texto completoSoldatov, Mikhail A., Pavel V. Medvedev, Victor Roldugin, Ivan N. Novomlinskiy, Ilia Pankin, Hui Su, Qinghua Liu y Alexander V. Soldatov. "Operando Photo-Electrochemical Catalysts Synchrotron Studies". Nanomaterials 12, n.º 5 (2 de marzo de 2022): 839. http://dx.doi.org/10.3390/nano12050839.
Texto completoTesis sobre el tema "Photo-electrochemical cells"
Zhu, Jianfeng M. Eng Massachusetts Institute of Technology. "An evaluation of the hydrogen economy and metal oxide based photo-electrochemical cells". Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/62684.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (p. 130-142).
Fossil fuels depletion and climate change are driving the need for sustainable development and renewable energy sources globally [1]. Solar being the most abundant and widespread source of renewable energy is resulting in a rapidly growing, with a growth rate more than 35% annually for the past 10 years [4]. Hydrogen is an ideal energy carrier for next generation given its high efficiency, environmental friendliness, wide application as well as several attractive methods for storage and distribution [17]. The hydrogen economy, a proposed system of producing, delivering and employing energy by using hydrogen, is under intensive research and development, and is projected to be realized at the end of this century as one of the leading suppliers [60]. Photo-electrochemical (PEC) cells connect the solar energy and hydrogen economy together by directly converting solar energy into chemical energy in the form of hydrogen gas. The metal oxide based PEC cell has advantages of low cost, high stability and durability and environmental friendliness [14], a good option for commercialization. With the rapid development of nanotechnology in recent years, novel nano-structured metal oxide PEC cells can have higher efficiency and better performance due to the effects of quantization, large surface areas, improved charge transport, etc. In this thesis, the current status and future development of the hydrogen economy in terms of identifying the markets, opportunities and risks of solar-hydrogen has been reviewed and accessed. The technology review of PEC cells in terms of the working mechanism and efficiency determining factors has been studied. The current research efforts on metal oxide based PEC cells for optimizing the performances and processing methods have also been studied. A case study and cost modeling in the context of scenario has been conducted; the analysis showed the cost of PEC cells was still very high mainly due to the high materials and processing costs. Thus, future research development should focus on the technological approaches with low materials and processing costs and high energy conversion efficiency for earlier commercialization of PEC cells. Besides, hydrogen storage, distribution, safety codes and standards, education and training as well as fuel cell technology must also require intensive research and development to insure the realization of solar-hydrogen economy.
by Jianfeng Zhu.
M.Eng.
Maragno, Angela. "Photo-electrochemical cells for green H2 production : a contribution to scaling up studies". Electronic Thesis or Diss., Lyon 1, 2024. http://www.theses.fr/2024LYO10038.
Texto completoThis PhD project focuses on the comparative study of two types of solar fuel generators: a PEC cell based on a bismuth vanadate (BiVO4) photoanode, and an integrated photoelectrochemical (IPEC) cell combining a solar cell with an electrolyser. Both devices achieve the artificial photosynthesis process of capturing solar energy and storing it in chemical bonds. The goal of the work is to identify the limiting parameters that hinder the large-scale deployment of these photoelectrochemical devices and to propose solutions in order to facilitate research in this field. Two specific scientific questions are at the heart of this research: 1. What is the impact of heterogeneities, inherent to large-scale preparation processes, on the performance of photoactive materials? 2. What role can integration play in transferring performance from the laboratory to the pilot scale? To answer the first question, an experimental parametric study was undertaken on BiVO4 photoanodes, considered as photoactive semiconductors representative for artificial photosynthesis. In parallel, in order to answer to the second question, an IPEC cell, the combination of a PK/Si tandem solar cell with a proton exchange membrane electrolyser, was realized, tested and optimized. In a second phase, this approach was followed by the design of a monolithic module, integrating 9 IPEC cells. The realization of 5 of these modules enabled the assembly of the EASI Fuel device (European Autonomous Solar Integrated fuel station) for the continuous conversion of H2 (produced under sunlight by the IPEC cells) and CO2 into CH4 within a methanogenesis Archaea-based bioreactor. Thanks to this innovative coupling, the EASI Fuel device was selected and successfully tested for 72 hours of continuous operation in total autonomy, during the final of the Horizon Prize - Fuel from the Sun: Artificial Photosynthesis competition, which took place at the end of the 2nd year of the thesis
Delices, Annette. "Organized Organic Dye / Hole Transporting Materials for TiO2- and ZnO- based Solid-State Dye-Sensitized Solar Cells (s-DSSCs)". Thesis, Sorbonne Paris Cité, 2017. http://www.theses.fr/2017USPCC066/document.
Texto completoDue to instability problems of dye sensitized solar cells (DSSCs) in longtime uses, the iodine based liquidelectrolyte has been replaced by several types of solid hole transporting materials (HTM) to perform solidstate DSSCs (s-DSSCs). Among them, the substitution by conducting polymers (CP) has attractedconsiderable attention because of their good stability, high hole-conductivity and simple deposition withinthe mesoporous TiO2 semiconductor. In this thesis work, several s-DSSCs based on CPs used as HTM havebeen developed in order to improve their photovoltaic performances taking into account the following twoobjectives: (i) the optimization of the interfacial charge transfer processes within the solar cell, and (ii) theoptimization of the charge transport within the n-type oxide semiconductor. To reach these goals, eachcomponent that constitutes the device was varied in order to investigate its effect on the device’sperformances. As first attempt, an analytical study is carried out by varying the sensitizer in order todetermine the fragments of the dyes structures, that have an important effect on the in-situ photoelectrochemical polymerization process (PEP) both in organic and in aqueous media and hence on theperformances of the s-DSSCs. Based on these results, a new concept of removing completely the interfacebetween the dye and the HTM is developed. This is achieved by the synthesis of new dyes covalently linkedto an electroactive monomer which is co-polymerized by in-situ PEP. The resulting co-polymer, used asHTM, is covalently linked to the dye. In addition, the nature of the chemical bond linking the triphenylamineresidue TPA to the monomer is also investigated as a key factor in the s-DSSCs performances. Besides, andto optimize the charge transport processes within this type of s-DSSC, the elaboration of novel ZnO baseds-DSSCs has been achieved and investigated
García, García Matías Alejandro. "Photo-anodes based on molybdenum oxides for the hydrolysis of water in a photo-electrochemical cell". Tesis, Universidad de Chile, 2019. http://repositorio.uchile.cl/handle/2250/170678.
Texto completoLas fuentes de energía limpias y sostenibles deben ser consideradas una base importante para el futuro crecimiento y desarrollo económico de cualquier país. Actualmente, el suministro mundial de energía depende en gran medida de los combustibles fósiles. Esto conlleva a que tecnologías tales como las celdas foto-electroquímicas se vuelvan especialmente atractivas, ya que permiten usar energía solar para producir hidrógeno. El funcionamiento de las celdas foto-electroquímicas se basa en el uso de semiconductores como electrodos, que al ser irradiados generan pares hueco-electrón, los cuales pueden migrar en la superficie del semiconductor y reaccionar con las especies adsorbidas o recombinarse entre sí. El hueco electrónico generado por la migración de un electrón puede oxidar una molécula de agua para producir oxígeno en el ánodo, mientras que los electrones generados viajan hacia el cátodo para reducir los protones presentes en el agua formando hidrógeno El presente trabajo de tesis tuvo como objetivo general la sintesis (a través de los métodos de electrodeposición y de spin-coating) y caracterización del desempeño de foto-ánodos basados en óxidos de molibdeno para la producción de hidrógeno en una celda foto-electroquímica a partir de electrólisis de agua. Películas de óxido de molibdeno dopadas con niquel y sin dopar se electrodepositaron aplicando un potencial de -1,377 V vs Ag / AgCl (KCl 3 M) durante 3 horas en un vidrio de cuarzo cubierto con dióxido de estaño dopado con flúor - FTO - sumergido en soluciones acuosas de molibdato-citrato a pH 9. Por otra parte, se depositaron peliculas de MoOx, WO3 y MoOx dopado con W sobre vidrio de aluminoborosilicato recubierto con óxido de estaño dopado con flúor. Este proceso se realizó mediante spin-coating a 4000 rpm durante 40 segundos. La caracterización de los foto-ánodos fabricados a través de electrodeposición y spin-coating sugiere que presentan propiedades semiconductoras y catalíticas que los hacen atractivos para su uso en una celda foto-electroquímica para la hidrólisis del agua. Sin embargo, aunque los foto-electrodos sintetizados a través de las técnicas mencionadas tienen un intervalo de banda prohibida óptimo para aprovechar eficientemente la luz solar, la caracterización foto-electroquímica mostró que estos electrodos no exhiben una estabilidad en solución acuosa y que son susceptibles a la foto-corrosion, que son factores limitantes para el uso de semiconductores convencionales como foto-electrodos.
Delices, Annette. "Organized Organic Dye / Hole Transporting Materials for TiO2- and ZnO- based Solid-State Dye-Sensitized Solar Cells (s-DSSCs)". Electronic Thesis or Diss., Sorbonne Paris Cité, 2017. https://theses.md.univ-paris-diderot.fr/DELICES_Annette_2_va_20170929.pdf.
Texto completoDue to instability problems of dye sensitized solar cells (DSSCs) in longtime uses, the iodine based liquidelectrolyte has been replaced by several types of solid hole transporting materials (HTM) to perform solidstate DSSCs (s-DSSCs). Among them, the substitution by conducting polymers (CP) has attractedconsiderable attention because of their good stability, high hole-conductivity and simple deposition withinthe mesoporous TiO2 semiconductor. In this thesis work, several s-DSSCs based on CPs used as HTM havebeen developed in order to improve their photovoltaic performances taking into account the following twoobjectives: (i) the optimization of the interfacial charge transfer processes within the solar cell, and (ii) theoptimization of the charge transport within the n-type oxide semiconductor. To reach these goals, eachcomponent that constitutes the device was varied in order to investigate its effect on the device’sperformances. As first attempt, an analytical study is carried out by varying the sensitizer in order todetermine the fragments of the dyes structures, that have an important effect on the in-situ photoelectrochemical polymerization process (PEP) both in organic and in aqueous media and hence on theperformances of the s-DSSCs. Based on these results, a new concept of removing completely the interfacebetween the dye and the HTM is developed. This is achieved by the synthesis of new dyes covalently linkedto an electroactive monomer which is co-polymerized by in-situ PEP. The resulting co-polymer, used asHTM, is covalently linked to the dye. In addition, the nature of the chemical bond linking the triphenylamineresidue TPA to the monomer is also investigated as a key factor in the s-DSSCs performances. Besides, andto optimize the charge transport processes within this type of s-DSSC, the elaboration of novel ZnO baseds-DSSCs has been achieved and investigated
Gonzalez, Aravena Arely Carolina. "Strategies to enhance extracellular electron transfer rates in wild-type cyanobacterium Synechococcus elongatus PCC7942 for photo-bioelectricity generation". Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/274353.
Texto completoEskandari, Azin. "A preliminary theoretical and experimental study of a photo-electrochemical cell for solar hydrogen production". Thesis, Université Clermont Auvergne (2017-2020), 2019. http://www.theses.fr/2019CLFAC104.
Texto completoIn order to meet the energy and climate challenge of the coming 21st century, one solution consists of developing processes for producing storable energy carriers by artificial photosynthesis to synthesize solar fuels, in particular hydrogen, in order to valorize the solar resource. The understanding of these processes and the achievement of high kinetic and energetic performances require the development of generic, robust and predictive knowledge models considering radiative transfer as a physical process controlling the process at several scales but also including the various other phenomena involved in the structure or reification of the model.In this PhD work, the photo-reactive process at the heart of the study was the photo-electrochemical cell. More complex than the simple photoreactor, with a photo-anode and a (photo)cathode, the photo-electrochemical cell spatially dissociates the oxidation and reduction steps. Based both on the existing literature (mainly in the field of electrochemistry) and by deploying the tools developed by the research team on radiative transfer and thermokinetic coupling formulation, it was possible to establish performance indicators of photo-electrochemical cells.In parallel to the establishment of this model, an experimental approach was undertaken based first on a commercial Grätzel-type cell (DS-PEC) indicating the general trends of such photon energy converters with in particular a drop in energy efficiency as a function of the incident photon flux density. A modular experimental device (Minucell) has also been developed and validated in order to characterize photo-anodes of different compositions such as chromophore impregnated TiO2 electrodes for operation in Grätzel cells or Fe2O3 hematite electrodes (SC-PEC) where the semiconductor plays both the functions of photon absorption and charge carrier conduction. Above all, the Minucell device allowed to test, characterize and model the behavior of a bio-inspired photo-electrochemical cell for H2 production using at the photo-anode a Ru-RuCat molecular catalyst (developed by ICMMO Orsay/CEA Saclay) and at the cathode a CoTAA catalyst (developed by LCEMCA Brest). Minucell was used to characterize each constituent element of a photo-electrochemical cell and then the cell as a whole confirming the trends and observations obtained on energy efficiencies.This preliminary work opens up a wide range of research prospects, lays common ground between electrochemistry and photo-reactive systems engineering, and provides insights into the design and kinetic and energy optimization of photo-electrochemical cells for the production of hydrogen and solar fuels
You, Sheng Mu. "Metal organic frameworks as efficient photosensitizer for TiO₂ nanoarray anode and application to water splitting in PEC cells Fe/Ni Bimetallic organic framework deposited on TiO₂ nanotube array for enhancing higher and stable activity of oxygen evolution reaction Novel nano-architectured water splitting photoanodes based on TiO₂-nanorod mats surface sensitized by ZIF-67 coatings Surface sensitization of TiO₂ nanorod mats by electrodeposition of ZIF-67 for water photo-oxidation Electrochemically capacitive deionization of copper (II) using 3D hierarchically reduced graphene oxide architectures". Thesis, université Paris-Saclay, 2020. http://www.theses.fr/2020UPASF015.
Texto completoThe fossil fuel reserves are dwindling and their unrestricted use has generated profound changes in Earth's surface temperature and climate. Storing solar energy in the form of hydrogen produced by dissociation of water is an ideal way to mitigate global warming. Materials from the “metal organic framework” (MOF) family are starting to be used as photo-electrocatalysts, especially for photo-dissociation of water. Their extremely high porosity and their great versatility, both chemical and structural, designate them as potential candidates to facilitate the absorption of solar radiation and catalyze the dissociation of water in photoelectrochemical cells. By controlling the chemical composition and doping of the linker used in the MOF, it is possible to adjust the band gap energy, to favor the functionalization on very varied substrates or even to adjust their resistance to corrosion in various chemical environments. They are therefore materials of great interest for catalysis, electrocatalysis or photo-electro-catalysis. On the other hand, nano-structured TiO₂, for example in the form of nanotube or nanowire mats, sometimes called TiO₂ nanoarray (TNA), is a material very suitable for the construction of photoanodes for the evolution of oxygen in aqueous medium. It has already been extensively studied and described in the literature. During our thesis, we manufactured composite materials made up of MOFs of transition metals (Ni, Co, Fe) deposited on TNA (network of nanotubes or nanowires). For this we used an electrochemical method of electrodeposition (cyclic voltammetry). This allowed us to deposit metallic nanoparticles on TNA with fixed potential - 1.0 V and then transform them by chemical reaction with organic ligands (1,3,5-benzenetricarboxylic acid, BTC, 1,4-benzenedicarboxylic acid, BDC and imidazole, 2MZ) by thermal-thermal route. The materials obtained exhibit significant electrocatalytic activity and excellent photoelectrochemical durability. These composite materials have been successfully used as an active phase in photo-electrodes for the oxygen release reaction (OER)
DESTRO, MATTEO. "Towards Realization of an Innovative Li-Ion Battery: Materials Optimization and System Up-Scalable Solutions". Doctoral thesis, Politecnico di Torino, 2013. http://hdl.handle.net/11583/2506270.
Texto completoChen, Wei-Hui y 陳偉暉. "Quantum Molecular Dynamics Analysis on the Performance of Nanotube Photo-Electrochemical Solar Cells". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/60409239216537257675.
Texto completoCapítulos de libros sobre el tema "Photo-electrochemical cells"
Alexander, John Callum. "Principles of Photo-Electrochemical Cells". En Springer Theses, 47–92. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-34229-0_3.
Texto completoPutz, Mihai V., Marina A. Tudoran y Marius C. Mirica. "Bondonic Electrochemistry". En Renewable and Alternative Energy, 277–359. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-1671-2.ch010.
Texto completoPutz, Mihai V., Marina A. Tudoran y Marius C. Mirica. "Bondonic Electrochemistry". En Sustainable Nanosystems Development, Properties, and Applications, 328–411. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-0492-4.ch010.
Texto completoVinod, Anjana y Parashuram L. "RECENT ADVANCEMENTS IN STRUCTURAL DESIGN OF NANOMATERIALS FOR ENERGY STORAGE DEVICES AND PHOTOCATALYSIS". En Futuristic Trends in Chemical Material Sciences & Nano Technology Volume 3 Book 20, 170–78. Iterative International Publishers, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3becs20p2ch2.
Texto completoBeniwal, Shivang, Akash Patel y Meetesh Singh. "PHOTO-RECHARGEABLE SUPERCAPACITOR: MODES OF INTEGRATION, APPLICATIONS, CHALLENGES, AND FUTURE PROSPECTS". En Futuristic Trends in Renewable & Sustainable Energy Volume 3 Book 1, 138–53. Iterative International Publishers, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3bdrs1p1ch11.
Texto completoP. Khirade, Pankaj y Anil V. Raut. "Perovskite Structured Materials: Synthesis, Structure, Physical Properties and Applications". En Recent Advances in Perovskite Materials [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.106252.
Texto completoChawla, Priyanka, Shivangi Trivedi y Kumari Pooja. "Investigation on Various Polymer Electrolytes for Development of Dye Sensitized Solar Cell". En Materials Science: A Field of Diverse Industrial Applications, 158–73. BENTHAM SCIENCE PUBLISHERS, 2023. http://dx.doi.org/10.2174/9789815051247123010012.
Texto completoHaga, Masa-aki. "Surface-Confined Ruthenium Complexes Bearing Benzimidazole Derivatives: Toward Functional Devices". En Ruthenium - an Element Loved by Researchers [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.97071.
Texto completoFukuzawa, Kenji, Keiichi Yanagisawa y Hiroki Kuwano. "Photo-Electrochemical Cell Utilizing Bacteriorhodopsin Immobilized onto a Thin-Film Lattice Fabricated by Micromachining Techniques". En Biosensors '94, 340. Elsevier, 1994. http://dx.doi.org/10.1016/b978-1-85617-242-4.50284-6.
Texto completoActas de conferencias sobre el tema "Photo-electrochemical cells"
Smirnov, Vladimir y Katharina Welter. "Multijunction Si Solar Cells for Integrated Photo-Electrochemical Devices". En nanoGe Fall Meeting 2018. València: Fundació Scito, 2018. http://dx.doi.org/10.29363/nanoge.fallmeeting.2018.056.
Texto completoSmirnov, Vladimir y Katharina Welter. "Multijunction Si Solar Cells for Integrated Photo-Electrochemical Devices". En nanoGe Fall Meeting 2018. València: Fundació Scito, 2018. http://dx.doi.org/10.29363/nanoge.nfm.2018.056.
Texto completoPaudel, Yamuna y Matthew Y. Sfeir. "GaAs photo diode for electrochemical process enhancement". En Frontiers in Optics. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/fio.2022.jw4a.48.
Texto completoCardenas-Valencia, A. M., D. P. Fries, G. Steimle, H. Broadbent, L. C. Langebrake y R. F. Benson. "Fabrication of Micro-Actuated Galvanic Cells as Power on Demand for Lab on a Chip Applications by Means of Novel PCB/MEMS Technology". En ASME 2003 1st International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2003. http://dx.doi.org/10.1115/fuelcell2003-1731.
Texto completoShatkovskis, E., V. Zagadskij, A. Jukna, R. Boris, V. Antonovic, J. Stupakova, R. Mitkevicius, A. Baradinskaite y J. Keriene. "Formation of surface morphology of silicon solar cells by means of two-step photo-electrochemical etching and their characterization". En Eigth International Conference on Advanced Optical Materials and Devices, editado por Janis Spigulis. SPIE, 2014. http://dx.doi.org/10.1117/12.2083927.
Texto completoS. Sánchez, Rafael, Iván Mora-Sero, Sofia Masi, Marie Kreĉmarová, Agustín O. Alvarez, Jesús Sanchez-Díaz, Jesús Rodriguez-Romero et al. "Synergistic Additive's Engineering and Mechanistic Photo-Electrochemical Insights for the Development of High-Performance Tin-based Perovskite Solar Cells". En International Conference on Hybrid and Organic Photovoltaics. València: Fundació Scito, 2022. http://dx.doi.org/10.29363/nanoge.hopv.2022.083.
Texto completoLi, Jinwei y Yong Shi. "Electron Transport and Recombination in TiO2 Nanofiber Dye Sensitized Solar Cell". En ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64979.
Texto completoLiu, Xiaolu, Yang Liu, Kai Ren, Paul Lawson, Andrew Moening, Matthew Haubert, Yong X. Gan et al. "Clean Energy Generation by a Nanostructured Biophotofuel Cell". En ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2013 Heat Transfer Summer Conference and the ASME 2013 7th International Conference on Energy Sustainability. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/fuelcell2013-18261.
Texto completoMaity, Subhasis y Nabin Baran Manik. "Safranine T dye based photo electrochemical solar cell: Effect of electrodes on device mechanism". En 2007 International Workshop on Physics of Semiconductor Devices. IEEE, 2007. http://dx.doi.org/10.1109/iwpsd.2007.4472584.
Texto completoTseng, C. Y., C. H. Wu, H. Y. Shin y C. T. Lee. "Investigation of Surface Passivation on III-V compound Solar Cell using Photo-electrochemical Oxidation Method". En 2009 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2009. http://dx.doi.org/10.7567/ssdm.2009.p-6-8.
Texto completo