Siga este enlace para ver otros tipos de publicaciones sobre el tema: Operations de banque.
Artículos de revistas sobre el tema "Operations de banque"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte los 50 mejores artículos de revistas para su investigación sobre el tema "Operations de banque".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Explore artículos de revistas sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.
1
Hahnloser, Chanson, Nassiopoulos, Wahl y Petropoulos. "Laparoscopic Surgery for Colorectal Cancer. Experience of 103 Operations". Swiss Surgery 8, n.º 5 (1 de octubre de 2002): 203–8. http://dx.doi.org/10.1024/1023-9332.8.5.203.
Texto completoResumen
But: Le but est d'analyser les résultats de la chirurgie colo-rectale laparoscopique appliquée aux cancers en terme de faisabilité avec une sécurité suffisante et en terme de survie. Méthode: De mars 1993 à décembre 2000, 103 patients porteurs d'un cancer colo-rectal ont été opérés par laparoscopie. Leurs données ont été relevées prospectivement sur une banque de donnée. Résultats: Quarante-deux femmes et 61 hommes d'un âge moyen de 66.7 ans ont été opérés. Il s'agissait de 9 hémicolectomies droite, 6 hémicolectomies gauche, 35 sigmoïdectomies, 41 résections antérieures basses et 12 amputations abdomino-périnéales. Le taux de conversion était de 14.5%. Des complications postopératoires sont survenues chez 21 patients (20.3%) et ont diminuées avec l'expérience. La mortalité du premier mois était de 0.9%. Tous les cancers (31% stade UICC I, 28% stade II , 37% stade III et 3% stade IV) ont été réséqués en tissu sain avec 19.8 ganglions lymphatiques en moyenne par pièce opératoire. 53.3% des patients sont réalimentés à partir du 2ème jour postopératoire et ils ont quittés l'hôpital en moyenne 12.6 jours après l'intervention. Trois métastases des orifices de trocart, 4 récidives locales et 10 métastases à distance sont survenues après un suivi moyen de 34.5 mois (12-92). Conclusion: La chirurgie laparoscopique du cancer colo-rectal permet une résection oncologique adéquate avec une morbidité acceptable et une mortalité faible. Pour démontrer que le taux de récidive et la survie sont équivalents à ceux de la chirurgie ouverte, des études prospectives randomisées sont encore nécessaires.
2
Lohachova, Y. O. y M. V. Yesina. "Comparative analysis of Ukrainian and foreign banking applications". Radiotekhnika, n.º 216 (20 de marzo de 2024): 57–61. http://dx.doi.org/10.30837/rt.2024.1.216.04.
Texto completoResumen
Mobile banking applications have been actively used in the financial sector for several years. Such applications significantly facilitate the use of banking services for their users. At the time of active digitalisation, the financial sector also needed reforms and active changes, that is why developers have been actively working on creating first home banking and then mobile banking applications since the end of the last century. Mobile banking applications have come a long way in evolution, so that users can now perform not only simple banking operations, but also many new additional functions making life easier. The development of the technologies used has also led to the emergence of new vulnerabilities, which required the improvement of security systems in such applications. The development path and experience of Ukrainian applications is somewhat different from that of foreign ones, but no less valuable. The development of foreign applications is more standardised and controlled by the government. Such solutions allow for better verification of compliance with security requirements. However, it should not be forgotten that mobile banking was created to facilitate financial transactions remotely, and therefore it should be easy to use by the average user. The article provides a comparative analysis of Ukrainian and foreign banking applications, including: Stanford FCU, Fideuram, N26, Banque populaire du nord, Sparkasse, Monobank, Privat24, Ukrsib-online, Oschadbank, and PUMB. The applications were compared by two groups of criteria, namely security and convenience criteria. The article focuses not only on the aspects in which Ukrainian applications should develop, but also on those in which they have an advantage over foreign apps.
3
Bahati, Aimable y Mercyline Kamande. "Risk Management Tools and Financial Performance of Commercial Banks in Rwanda: A Case Study of Banque Populaire Du Rwanda Public Limited Company". Journal of Advance Research in Business Management and Accounting (ISSN: 2456-3544) 7, n.º 10 (31 de octubre de 2021): 134–42. http://dx.doi.org/10.53555/nnbma.v7i10.1065.
Texto completoResumen
The study is about risks management tools on financial performance of commercial banks in Rwanda, the case study of BPR Plc. The general objective of this research was to assess the contribution of risks management tools on financial performance of commercial banks in Rwanda, taking a case study of BPR. Specific objectives includes to ascertain risks management tools used by BPR in managing its asset; to analyze the financial performance of BPR in Rwanda since 2015 to 2018 and to find the link amid risks management tools and financial performance of commercial banks in Rwanda. The results of this research are useful for academic purpose as reference, to institutions, which will access the findings to address risk issues and improve their control measures against risk. The main theory applied in this research is Agency theory. This research adopted descriptive and correlation research designs and is both qualitative and quantitative research. Forty-two (42) is target population used; census was applied in this research as the sampling technique since the target population is small and data were analyzed using SPSS version 20 to generate frequency tables, charts, and regression analysis. The research revealed that at BPR Plc, use of risk management tools has a great positive relationship with the financial performance of BPR as it is being indicated by the respondents about standard and reports, position limit and rules, investment guideline and strategies whether help in financial performance in BPR, many respondents were in agreement with this statement as it is indicated by a high means and homogeneity in responses as the standard deviations obtained for all items of independent variables were less than one (SD<1). for objective two, it was seen that BPR Plc financial performance increased considerably since 2015 to 2018 as results of risk management tools; for relationship, the results found that risk management tools greatly influence BPR financial performance as justified by P-values which are positive and statistically significant respectively for position limit and rules (p=0.003), standard and reports (p=0.034), investment guideline and strategies (p=0.023) which are less than the significance level (P<0.05) from multiple regression analysis. The conclusion is that risk management tools greatly influence banks financial performance. So far, much is already done by the Bank to overcome and mitigate risk in all BPR operations but there is need to emphasize on new strategies to improve on standards, rules and regulation to enforce risk mitigation. In today’s BPR daily business; technology is increasing, process and procedures are tightened, account manipulation are restricted. This has greatly reduced reputation and financial risk leading to increase in financial performance. The further studies should be carried out on implementation of risk management strategies and financial performance in banking industry.
4
Mukti, Artin Bayu y Azis Nur Rosyid. "Analysis of banquet section performance during high season at the UTC Hotel Semarang". Journal of Gastro Tourism 1, n.º 1 (11 de enero de 2023): 8–20. http://dx.doi.org/10.52465/jogasto.v1i1.123.
Texto completoResumen
This research was conducted to find out how the banquet section performance during high season at UTC Hotel Semarang. The analytical method used in this study is Qualitative description of the method of collecting data through 4 ways, namely, interviews, observations, questionnaires and literature. The results of data analysis stated that the banquet operations went smoothly. While the obstacles faced by the banquet section are the limitations of Human Resources. The performance of the banquet staff at the time of the high season is good and maximum.
5
Trimo Legowo, Juni y Ajid Angga Seta. "Peranan Banquet Section dalam Mendukung Operasional Food and Beverage Department di Hotel Adhiwangsa Solo". Mabha Jurnal 4, n.º 1 (31 de mayo de 2023): 24–30. http://dx.doi.org/10.70018/mb.v4i1.58.
Texto completoResumen
Penelitian ini bertujuan memberikan gambaran mengenai peranan banquet section dalam mendukung operasional food & beverage di Adhiwangsa Hotel & Convention Solo. Dalam penelitian ini penulis membahas tiga (3) pokok permasalahan yaitu bagaimana peranan banquet section dalam mendukung operasional food and beverage di Hotel Adhiwangsa Solo, dan bagaimana upaya banquet section dalam mendukung operasional food and beverage di Hotel Adhiwangsa Solo, dan apa saja masalah yang di hadapi banquet section dalam mendukung operasional food and beverage di Hotel Adhiwangsa Solo dan upaya penyelesaiannya. Metode yang digunakan dalam penelitian ini adalah metode kualitatif. Teknik dalam penelitian ini dilakukan dengan wawancara terhadap staf food & beverage seperti food & beverage manager dan food & beverage supervisor di Adhiwangsa Hotel & Convention Solo, serta melakukan pengamatan secara langsung mengenai peranan banquet section dalam mendukung operasional food & beverage di Adhiwangsa Hotel & Convention Solo. Berdasarkan hasil pembahasan, penelitian ini dapat diambil kesimpulan bahwa banquet operation sangat berperan penting dalam mendukung kualitas pelayanan food & beverage di Adhiwangsa Hotel & Convention Solo.
6
Ji, Xinyu. "Analysis of COVID-19's Effects on China's Catering Industry and the Optimization of Marketing Strategies". BCP Business & Management 39 (22 de febrero de 2023): 278–84. http://dx.doi.org/10.54691/bcpbm.v39i.4152.
Texto completoResumen
The repeated outbreak in 2022, economic ups and downs, and weak consumer spending under multiple adverse factors, such as the food and beverage industry, is a big blow: raw materials and artificial cost rise, traffic fell 90%, mass unsubscribe accommodation, wedding banquet, conference, rapid eat-in downturn hit, and many other factors, lead to food and beverage business difficulties, make a lot of food is especially difficult. The outbreak of a new type of coronavirus pneumonia significantly influenced the world’s economy. Small micro-enterprises, as the main mode of operation of the catering enterprises, have experienced four months of winter. They are faced with less income online operation, the effect not beautiful, supply chain difficulties, and many problems such as shortage of cash flow. Hence, If catering businesses don't actively work to strengthen their crisis management skills, they'll suffer substantial losses that could even disrupt their regular business operations. So it is a very important topic to study the current situation of the catering industry.
7
Cosset, Jean-Claude y Laurent Lampron. "Rentabilité, risque et diversification internationale des banques à charte canadiennes". Articles 58, n.º 4 (21 de enero de 2009): 477–92. http://dx.doi.org/10.7202/601034ar.
Texto completoResumen
Abstract This paper examines in the framework of the asset pricing theory how the internationalization of banking operations has influenced the returns and the risk of Canadian chartered banks. Banking statistics reveal that in the last decade the Canadian banks have greatly increased their foreign operations. These statistics also indicate that the development of international banking operations has been more remarkable than that of domestic banking operations. Contrary to some banks' claims, our evidence reveals that average returns on foreign operations have been inferior to those obtained on purely Canadian operations. Moreover, in conformity with the asset pricing theory we have found that the systematic risk of international operations is smaller than that of domestic operations. Our results suggest that Canadian chartered banks have reduced their overall risk in internationalizing their operations.
8
Mlađenović, Mirjana. "Analysis of the degree of legal independence of the Croatian National bank and the National bank of the Republic of North Macedonia". Glasnik Advokatske komore Vojvodine 95, n.º 2 (2023): 733–75. http://dx.doi.org/10.5937/gakv95-40950.
Texto completoResumen
The stability of each country's monetary system depends on the quality of operations of its Central Bank, as one of the most important institutions. Due to their great importance, central banks hold a special place in scientific analysis. For a Central Bank to successfully achieve its objectives, it has to operate independently of the executive and legislative powers. Through content analysis and the comparative method, this paper analyzes and compares different parameters and indices measuring the independence of the central banks of the Republic of Croatia and the Republic of North Macedonia. Considering that the independence of a Central Bank is inextricably linked with its credibility, this paper conducts research that answers the question - what is the level of legal independence of the Croatian National Bank and the National Bank of the Republic of North Macedonia? It can be said that, in the last decade, both the legal and actual independence of these central banks has reached its peak, but a certain degree of political dependence is still noticeable. There are certain differences in terms of political influence from country to country, but in any case, the syndrome of political dependence in former Yugoslav countries when compared to developed countries is extremely recognizable. The Republic of Croatia, as a member of the European Union, had to harmonize its laws on this issue, so it can be said that there are certain differences compared to other countries in this region. Central banks in countries that once belonged to the same Communist bloc, and which today have different statuses in relation to the European Union, are excellent examples for analyzing the degree of operational independence in relation to state power. The status of the Central Bank in a certain national and economic system depends on the legislation of that country, i.e., the constitutional norms and laws governing the Central Bank.
9
Zuhri, Mohammad Faisol, Siti Sufaidah y Agus Sifaunajah. "RANCANG BANGUN APLIKASI RENTAL ALAT-ALAT PESTA DENGAN SISTEM NOTIFIKASI". SAINTEKBU 10, n.º 2 (13 de junio de 2018): 17–26. http://dx.doi.org/10.32764/saintekbu.v10i2.205.
Texto completoResumen
Basically, every rental service is a business that serves to maintain, manage, and utilize rental tools that are then provided to customers. The development of this company, the need for technology is needed to support the work of the system to more quickly and efficiently in processing letters, bill notes and notes change goods, and displays notification information in the form of schedule events to facilitate the provision of information directly to all employees. Current conditions in the rental SUYONO in running its business activities have not used the information system technology so that in the operation of the operational activities are still slow. SUYONO rental requires an information system which will support its business activities. Information System users are not only used in information and communications technology (ICT) organizations but also used by companies to support their business activities. From some shortcomings that exist in the company then the researcher is interested to make a Rental Apparatus Party with the Notification System, so the rental SUYONO in performing its operations more easily and quickly. The existence of the application of party equipment rental can help SUYONO rental to process the data in accordance with the necessary needs, as well as Output results in the form of travel documents, the bill notes, change notes, and billing reports can speed up the presentation process. With the notification in the form of event schedule information displayed on the second screen can facilitate both for employees and office staff in providing information on the event schedule directly.
Keywords: Information Systems, Party Equipment Rental, Notifications, SUYONO
10
Elgie, Robert. "Responsabilité démocratique et indépendance de la banque centrale : la banque centrale européenne dans une perspective historique et comparative". Revue française d'administration publique 92, n.º 1 (1999): 635–49. http://dx.doi.org/10.3406/rfap.1999.3341.
Texto completoResumen
Democratie Accountability and the Independence of the European Central Bank in an Historical and Comparative Perspective ; Employing a form of methodology which permits the evaluation of the independence of central banks, the comparison of the evolution of the central banks in Britain and in France since the 17th century locates the main focus of debate on the issue of democratie accountability. The application of this method to the European Central Bank, and a comparison with the British and French banks leads to a democratie deficit being identifiable within the European institution. Since a reform of the ECB’s regulations does not appear timely, it is rather by way of a modification of its modes of operation that this weakness may be remedied.
11
I Gede Yoga Adi Wira Nata, Agus Dwi Santoso y Ardhiana Puspitacandri. "Rancang Bangun Prototipe Pengisian Air Expansion Tank Berbasis IoT". Jurnal Kendali Teknik dan Sains 2, n.º 3 (8 de julio de 2024): 209–20. http://dx.doi.org/10.59581/jkts-widyakarya.v2i3.3842.
Texto completoResumen
The shipping industry faces challenges in reducing environmental impact and increasing operational efficiency. Among them are the expansion tanks on ship engines which play an important role in maintaining the pressure and water quality of the engine cooling system, which is still run manually on some ships. This can result in the risk of engine damage due to overheating or unstable pressure. Manual water filling that requires crew supervision can cause operational instability. This research designed a prototype of an automatic water filling system for expansion tanks, using microcontroller-based automation technology and an Internet of things system to make monitoring easier. This system aims to increase efficiency and reduce the risk of engine damage, thereby supporting the sustainability of ship operations in the future. In the trials that have been carried out, this tool is able to operate the expansion tank filling automatically and efficiently. The distance sensor used has high accuracy with a largest error of 1.6%, and an average error of 0.01%. Integration with the Internet of Things system can run well and reliably with 100% success and latency of 0.5 – 1 second. The system's overall success rate is 80%. So the system can be used in real working conditions
12
Harfizar, Harfizar, Fauzan Manafi Albar y Muh Afiffudin. "RANCANG BANGUN SISTEM INFORMASI PENYALUR DANA BANTUAN SISWA ( BOS ) BERBASIS WEB". Journal CERITA 3, n.º 2 (1 de agosto de 2017): 228–44. http://dx.doi.org/10.33050/cerita.v3i2.660.
Texto completoResumen
Application of Information Technology has now spread almost in all fields is no exception in the management of the School Operational Fund allows all operational funds management activities informasi.Kebutuhan technology will utilize information technology is closely connected with the role of fund management boss as a standard program of education that is needed to finance the activities nonpersonnel operation for 1 ( one ) year as part of the overall education funding to education units can conduct educational activities on a regular and ongoing basis in accordance with National Education Standards . With the construction of Management Information Systems Applications " ASISMEN " School Operational Assistance " BOS " , which can provide information to the school principal and school treasurer or educational institutions regarding the distribution of financial problems by the BOS . So that the information provided is presented in the form of special reports that can be presented properly and periodically easily understood and easy to use. One example is the implementation of financial information systems in enterprises or other institutions , as well as in SDN Tangerang The final result of this research is a system that can provide accurate and up to date report that meets the objectives of the national education standard 8 set by the central government.
13
Richard Soegiarto y Soetam Rizky Wicaksono. "Rancang Bangun Sistem Informasi Manajemen Operasional Dilengkapi dengan Penjualan Sparepart pada Bengkel MJM". Merkurius : Jurnal Riset Sistem Informasi dan Teknik Informatika 2, n.º 5 (31 de julio de 2024): 248–61. http://dx.doi.org/10.61132/merkurius.v2i5.303.
Texto completoResumen
MJM is a leading workshop in Malang that focuses on car repairs and is known for its reliable reputation and quality service on Jl. Lake Tondano Raya F5/A26, Sawojajar. These workshops offer a variety of services, from engine to car body repairs, which makes manual transactions difficult and time-consuming due to increased service and cost complexity. This research aims to simplify transaction and operational processes in MJM workshops by developing supporting applications that include recording customer transactions, spare parts stock management, monitoring employee attendance, and mechanic payroll. The information technology provided can improve service quality, optimize operations, strengthen competitiveness, enable a sustainable approach, increase data accuracy, and support more timely decisions. The methodology used is waterfall, which follows a certain flow process starting from requirements analysis, planning, design, software development, testing, to the maintenance stage. The research focus is on the initial development of the system to ensure that the system functions well in the maintenance phase. The Operational Management Information System designed for MJM workshops includes important features such as recording spare parts, purchase and sale transactions for spare parts, service and car wash transactions, stock taking records, management of damaged or lost goods, stock cards, cash flow, and reports. transaction. This system is expected to reduce manual errors, provide better service, and improve overall operational performance.
14
Arjun Widiansyah, Sonhaji Sonhaji y Shofa Dai Robbi. "Rancang Bangun Sistem Monitoring Kebocoran ydrofluorocarbon (HFC) pada Cold Storage System Berbasis IoT di Kapal AHTS". Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan 2, n.º 4 (28 de octubre de 2024): 245–57. http://dx.doi.org/10.61132/globe.v2i4.602.
Texto completoResumen
This research aims to design and developing a hydrofluorocarbon (HFC) leak monitoring system in the cold storage cooling system on the Anchor Handling Tug Supply (AHTS) ship by utilizing Internet of Things (IoT) technology. HFC leaks in cooling systems can cause environmental hazards and operational inefficiencies. The proposed system integrates sensors and IoT devices to continuously monitor HFC levels, detect leaks in real-time, and provide instant alerts to crew and management. The system architecture includes sensors for HFC detection, a microcontroller for data processing, and a communication module for data transmission to a central monitoring platform. Real-time data can be accessed through a user-friendly interface, enabling timely intervention and maintenance. Initial testing shows that the system is effective in identifying and reporting HFC leaks, potentially reducing environmental impacts and improving the safety and efficiency of cold storage operations on AHTS vessels. Further development and extensive field testing are planned to refine the system and validate its performance across a wide range of operational conditions.
15
Zubaidah Zubaidah, Nurhasanah Tambunan y Rifani Khairani Pohan. "Rancang Bangun Sistem Informasi Inventaris Peralatan Broadcast TVRI Sumatera Utara Berbasis Web". Modem : Jurnal Informatika dan Sains Teknologi. 2, n.º 4 (27 de septiembre de 2024): 201–12. http://dx.doi.org/10.62951/modem.v2i4.262.
Texto completoResumen
This research aims to design and build a web-based broadcast equipment inventory information system at TVRI North Sumatra. This information system was developed to overcome existing inventory management problems, such as tracking, managing and maintaining broadcast equipment. The development method used includes requirements stages, system design analysis, implementation, and testing using the black box method. This system was built using PHP as the programming language, MySQL as the database, and CSS and JavaScript for the user interface. Test results show that this system can manage equipment inventory effectively, including the functions of borrowing, returning and maintaining equipment. This system also allows integration with other existing systems at TVRI and provides long-term benefits such as increasing data accuracy and operational efficiency. The implementation of this information system is expected to support smooth operations and improve the quality of inventory management at TVRI North Sumatra.
16
Anwar, Renaldi, Fahrullah y Dedi Mirwansyah. "Rancang Bangun Aplikasi Administrasi Perbaikan Kendaraan Pada Vehicle Operation Management Berbasis Web di PT Altrak 1978 Samarinda". METIK JURNAL 5, n.º 1 (25 de junio de 2021): 71–78. http://dx.doi.org/10.47002/metik.v5i1.218.
Texto completoResumen
PT ALTRAK 1978 Samarinda is a large branch that has several departments, including HR&GA, FA, Marketing, Part, Rebuild Center, Service and VOM (Vehicle Operation Management). The task of VOM is to maintain, repair and manage all operational vehicle assets owned by PT. ALTRAK 1978 at 10 Depos in the Kalimantan area, and one of the tasks of VOM is to create reports for all processes carried out at VOM and everything related to company operational vehicles, but many reports are made that require data from vehicle repairs such as operational vehicle repair history . When retrieving data from the repair history, we always experience difficulties because the data is incomplete and not integrated between several parts at PT. ALTRAK 1978 Samarinda and until now, if there are complaints about damage to operational vehicles, vehicle users still experience problems when they want to report damage to these vehicles because there is no administration system in every vehicle repair administration process. The formulation of the problem is how to make it easier for VOM to report vehicle repairs with a data source or repair history that can be seen and retrieved easily by several parties involved in the vehicle repair administration process with the aim of making it easier for VOM and vehicle users to receive and report vehicle damage quickly and in an integrated manner. each other between several departments.
17
HIDAYAT, TATANG, RISFAHERI RISFAHERI y NANAN NURDJANNAH. "RANCANG BANGUN ALAT PERONTOK LADA MODEL AKSIAL". Jurnal Penelitian Tanaman Industri 7, n.º 2 (15 de julio de 2020): 54. http://dx.doi.org/10.21082/jlittri.v7n2.2001.54-59.
Texto completoResumen
<p><strong>Design of axialflow thresherfor pepper</strong></p><p><strong></strong>The pepper threshing practice has been carried out using traditional method in which the pepper berries are usually trampled. This method is neither efficient nor higienic, and it also causes high losses of the berries. To overcome those problems, an experiment was carried out to make an axial flow thresher. The experiment was conducted at Research Institute for Spice and Medicinal Crops from April to December 1999. The experiment consisted of three steps, namely designing, constructing and testing. The objective of testing was to determine the optimum operation condition of the thresher. The testing was designed as a completely randomized complete design with three replications. The raw material for testing was pepper berries (Lampung Daun Lebar variety) of 8 - 9 month old. The result showed that the optimum condition for threshing process was 300 rpm cylinder rotation, with the spike separation process using 7.5° sieve angle. The performance of pepper thresher on that condition was : threshing eficiency 98.55%, spikes separation eficiency 89.22%, berries on spikes outlet 5.20% and berries damage 6.30%. The capacity of thresher was 260.56 kg raw material/hour. The operational cost was Rp 27.28/kg raw material, lower than that of the traditional threshing method (Rp 50/kg raw material).</p>
18
Bajčetić, Marija. "Legislative regime of the control function of the National Bank of Serbia over commercial banks". Pravo - teorija i praksa 39, n.º 1 (2022): 83–97. http://dx.doi.org/10.5937/ptp2201083b.
Texto completoResumen
The existence of a central bank in one country is of a great importance, because the central bank controls the functioning of the financial market and its participants (banks, insurance companies, financial leasing companies, payment institutions, voluntary pension fund management companies and exchange offices), striving to comply with the law on the National Bank of Serbia in achieving the goals that are clearly and precisely defined. It achieves its goals by performing the intended functions. One of the functions performed by the NBS is reflected in the control of banks, which is the topic of this paper. The control function of the NBS is defined by both the Law on the National Bank of Serbia and the Law on Banks. The NBS performs the function of controlling banks in the process of establishing a bank, but also in the course of its operations. The process of establishing a bank, as the most important financial institution, is far more complex. The complexity of this procedure is reflected in the fact that the legislator has forseen the procedure of obtaining preliminary approval and then obtaining a work permit. After holding the founding assembly of the bank and obtaining the obligatory consent, the bank can be registered. The control function is also represented in the fact that the bank has the obligation to submit regular and extraordinary reports to the National Bank. In this way, the NBS protects the financial market of Republic of Serbia from instability and crises that can cause illiquid, uncertain and illegal operations of banks.
19
Aprilia Pratiwi, Astri y Muhammad Iqbal. "Rancang Bangun Aplikasi Pendataan Kendaraan Operasional Menggunakan Metode Prototipe". Bulletin of Information Technology (BIT) 4, n.º 2 (29 de junio de 2023): 261–67. http://dx.doi.org/10.47065/bit.v4i2.714.
Texto completoResumen
PT. HM Sampoerna Tbk is a leading tobacco company in Indonesia as well as an affiliate of the world's leading tobacco company, Philip Morris International, which has many operational vehicles to support the process of distributing their products but the process of managing operational vehicles for maintenance or repair is still not optimal. Operational vehicles that are poorly maintained can cause problems with the vehicle at any time, causing large losses for the company. Operational vehicle maintenance must be carried out regularly so that the company's operational activities are not disrupted and to keep the vehicle in good condition and primed for traveling to distribute the company's products. The author develops an operational vehicle data collection application using the prototype method, namely rapid software development to present an overview of existing ideas and problems and then obtain feedback from users so that prototypes can be repaired immediately. The application design uses DFD and ERD and the results obtained from this research are applications that can provide information about the history of operational vehicle repairs, remind operational vehicle data management staff to carry out periodic maintenance.
20
Hidayat, Irfansyah Maulana y Budi Utomo. "RANCANG BANGUN SISTEM INFORMASI EVALUASI PENYELENGGARAAN PELATIHAN BIDANG KESEHATAN BERBASIS WEB". Jurnal Indonesia : Manajemen Informatika dan Komunikasi 4, n.º 2 (10 de mayo de 2023): 410–25. http://dx.doi.org/10.35870/jimik.v4i2.214.
Texto completoResumen
Evaluation is carried out to determine the effectiveness of the training. Evaluations that are still carried out manually/conventionally by collecting data through filling in instruments, have constraints including; Speed of submission of evaluation results report; delay in submitting the issuance of a certificate because the results of the report are used as a requirement for filing; limited storage space for files/report archives; risk of damage, loss of data either caused by viruses, dysfunction of device operations or accidental factors in deleting files. For this reason, a system is needed that can help and facilitate the evaluation process starting from recording, storing and reporting. System development was carried out using qualitative research methods and input-process-output system development methods using the steps of the System Development Life Cycle (SDLC) method of the prototype model. The PIECES Framework is used to analyze system requirements to produce user satisfaction levels. The results of the research are the design of a system consisting of Context Diagrams, Entity Relationship Diagrams (ERD), Table Relational Diagrams (TRD), Standard Operational Procedure (SOP) Flow Diagrams and Data Flow Diagrams (DFD). Users of this system are Admin (program person in charge), Assessors, Organizers and Leaders. This information system is able to facilitate the process of implementing and reporting the results of evaluation implementation, ease of accessing and presenting reports, providing data storage space and better data management compared to conventional methods.
21
Choi, MyungSook. "A Study on the Elements of “Integration of China and the West” in Tandun's ‘Martial arts Movie Trilogy’". Academic Association of Global Cultural Contents 54 (28 de febrero de 2023): 173–91. http://dx.doi.org/10.32611/jgcc.2023.2.54.173.
Texto completoResumen
Tan Dun, a representative composer of modern Chinese music, has been producing the most notable achievements in the field of Chinese film music by working on “Three Trilogy of Martial Arts” such as “Crouching tiger Hidden Dragon”, “The Heroes” and “The Banquet”. He is famous for his characteristics of actively giving traditional Chinese ideas by exquisitely converging Chinese and Western music elements. These works need to be emphasized in that they can explore strategies to communicate with the international community through Chinese culture. Tandun, who composed three film music, represents consistency in creative style in terms of composition technique, while showing some difference in specific music arrangement depending on the content and form of the film narrative. Therefore, this research focuses on the music theme design of “Crouching tiger Hidden Dragon”, “The Heroes” and “The Banquet”, which are referred to as “Musical Movie Trilogy”, analyzes and compares the film's narrative and music harmony firstly, then discusses how Western music was fused and embodied with the elements of traditional Chinese music.
22
Janaćković, Tanja y Maša Georgiev. "Comparative analysis of the significant positions of financial statements on the example of Raiffeisen Bank in the Republic of Serbia and in the Republic of Croatia". Ekonomski signali 16, n.º 2 (2021): 57–75. http://dx.doi.org/10.5937/ekonsig2102057j.
Texto completoResumen
The business of modern companies and lives of individuals are linked inseparably with banks and their operations. A company is referred to a bank for financial transactions and it represents the most common source for financing the foundation and development of the company from the moment of creating a business idea and the endeavor to implement it. In the focus of the paper is comparative analysis of significant items of balance sheet and income statement, on the example of Raiffeisenbankin the Republic of Serbia and in the Republic of Croatia. The aim of this paper is to point out significant trends in the operations of these banks through a comparative overview of the important financial positions.
23
Radojević, Tijana, Marina Kesić, Danica Rajin y Ričardas Butėnas. "Presentation of disclosures related to credit risk of a certain bank". European Journal of Applied Economics 20, n.º 1 (2023): 66–92. http://dx.doi.org/10.5937/ejae20-42344.
Texto completoResumen
The phenomenon of credit risk is one of the main distresses for the bank portfolio. If it becomes nonviable to gather claims from various main clients, a bank could persist in being insolvent. The latest financial crises have distinguished the necessity for a bank to identify, measure, assess, and control credit risk, in addition to providing an acceptable degree of capital to protect against possible decline in case of loan defaults. Accordingly, risk management depends steadily on the straight implementation of mathematical and statistical methods and models and the application of their outcomes for business goals. The aim of this paper is to present the disclosures that are related to bank credit risk, bearing in mind that credit risk management is one of the indicators of the results of banking operations.
24
Fadillah, Ihsan Zaky y Rita Komalasari. "Rancang Bangun Sistem Informasi Manajemen Operation OLT Aktual dan Ter-Integrasi". TeknoIS : Jurnal Ilmiah Teknologi Informasi dan Sains 14, n.º 1 (31 de enero de 2024): 80–90. http://dx.doi.org/10.36350/jbs.v14i1.234.
Texto completoResumen
PT Telkom Indonesia (TELKOM) merupakan perusahaan penyedia jasa jaringan telekomunikasi di Indonesia, dalam proses perkembangannya sangat membutuhkan integrasi data yang baik dari antar lini. Kinerja unit akan sangat ditentukan oleh kualitas pengelolaan data yang merupakan penggerak utama aktivitas bisnis perusahaan. Sistem Informasi Manajemen Operation OLT Aktual & Ter-Integrasi (SIMOOLTAN) pada Unit PED PT. Telekomunikasi Indonesia Tbk adalah sebuah solusi inovatif yang bertujuan untuk meningkatkan efisiensi dan efektivitas manajemen operasional. Sistem ini dirancang untuk memberikan pemantauan yang akurat dan terintegrasi, memfasilitasi perencanaan, rekayasa, dan implementasi yang efisien di Unit PED. Dengan fokus pada kebutuhan operasional Telkom Indonesia, SIMOOLTAN menyediakan antarmuka pengguna yang responsif, dan fitur-fitur terintegrasi guna mendukung pengambilan keputusan yang tepat waktu. Pada penelitian ini digunakan metode Prototype untuk pengembangan sistem, pendekatan ini digunakan untuk memahami kebutuhan pengguna, merinci fitur sistem dan mendapatkan feedback, atau rilis produk yang dibuat untuk menguji konsep dan proses untuk bertindak sebagai sesuatu yang akan di replikasi atau dipelajari. Implementasi SIMOOLTAN diharapkan dapat memberikan kontribusi positif terhadap manajemen operasional, membawa dampak signifikan terhadap efisiensi layanan, dan memberikan landasan yang kuat untuk pengembangan teknologi telekomunikasi di masa depan. Untuk memenuhi kebutuhan ini, diperlukan solusi inovatif berupa sistem visualisasi data. Sistem ini dirancang untuk memberikan akses realtime, responsif, dan akurat melalui satu pintu sumber data, menggunakan teknologi terkini, memungkinkan pemantauan yang efisien, pelacakan perubahan status, dan analisis data yang mendalam dengan fokus pada kecepatan dan keakuratan.
25
Ahmad Satriadi y Supriyatna Supriyatna. "Rancang Bangun Aplikasi E-Commerce untuk UMKM Konveksi". Mars : Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer 2, n.º 3 (20 de junio de 2024): 153–64. http://dx.doi.org/10.61132/mars.v2i3.153.
Texto completoResumen
This research presents the development of an e-commerce application aimed at enhancing the operational efficiency of Khadijah Konveksi, a small and medium-sized enterprise (SME) in the garment industry. The application, developed using Android, Java, and Kotlin, provides features for order management, real-time tracking, and online payment, significantly improving customer experience and operational workflow. Initial feedback indicates a high level of customer satisfaction and a notable increase in operational efficiency. The project also highlights the collaborative efforts between students, faculty, and industry professionals, demonstrating the impact of academic-industry partnerships in driving technological advancements for SMEs
26
Gemilang, Tirta Satria, Sandi Asmara, Tamrin Tamrin y Warji Warji. "Rancang Bangun Alat Pengasap Tipe Paralel". Jurnal Agricultural Biosystem Engineering 3, n.º 1 (19 de marzo de 2024): 87. http://dx.doi.org/10.23960/jabe.v3i1.8870.
Texto completoResumen
This research aims to design, manufacture and test a parallel type smoker which has an output that can be controlled and has uniform temperature in each smoker cabinet. In this research, design, assembly, testing and temperature regulation were carried out. This parallel type smoker has 3 main parts, namely the combustion stove, inlet pipe, and smoking cupboard. In the inlet pipe there is a faucet which functions as a control for the smoke output and temperature from the combustion stove to the smoking cupboard. In terms of testing, this tool was tested in several stages, namely trial 1, trial 2, and performance test. After the test is complete, the final stage is carried out, namely equalizing the temperature in each cupboard. The trial phase 1 was carried out with treatment on the operation of the smoke cupboard. Where the stages of operation of all cupboards are carried out simultaneously, then operation of 2 cupboards is carried out and one path is closed alternately. The results showed that the tool experienced problems in the form of unstable temperatures and leaks in the smoker cupboard, so it required patching with silicon. After design improvements have been made, trial 2 and performance testing are continued. Trial 2 was carried out to find out whether the tool still had problems or not before carrying out a performance test. The treatment for trial 2 was the same as that given during trial 1. As a result, the device had no leaks and the temperature was stable and the device was ready to operate at the 15th minute. After that, a performance test was carried out which had the same stages as trials 1 and 2. This is intended to see whether the tool is in accordance with the results during testing or not. After the performance test is carried out, the final stage is to equalize the temperature in each cupboard to produce the same and stable temperature. This equalization is done by adjusting the opening of the faucet valve on the inlet pipe. The results obtained were a parallel type smoker which had 3 smoking cabinets with the same temperature around 37oC. This temperature can used for low smoking temperature.Keywords: Design of Smoker, Parallel, Temperature.
27
Brunori, Andrea, Patrizio Bruni, Romano Greco, Renato Giuffré y Francesco Chiappetta. "Celebrating the centennial (1894–1994): Leonardo Gigli and his wire saw". Journal of Neurosurgery 82, n.º 6 (junio de 1995): 1086–90. http://dx.doi.org/10.3171/jns.1995.82.6.1086.
Texto completoResumen
✓ In spite of the recent introduction of craniotomes in neurosurgical practice, the simple but brilliant wire saw invented by Leonardo Gigli still holds an important place in neurosurgical instrumentation. Born in Florence in 1863, Gigli was forced by circumstances to leave Italy soon after getting his medical degree. He first spent 2 years attending the most celebrated obstetrical clinics in Paris and London and then, in 1892, moved to Breslau where he worked with Fritsch and Mikulicz. During this successful and rewarding period, Gigli proposed the lateralized pubiotomy (Gigli's operation) for safe delivery in cases of maternal pelvic deformities and, inspired by the sight of a jagged knife during a country banquet, conceived his wire saw to simplify the procedure. In 1894, at Professor Obalinski's suggestion, he successfully tested a modified saw type with a whalebone guide for the preparation of osteoplastic cranial flaps. In spite of his great popularity and the high esteem in which he was held abroad, Gigli's aims were systematically belittled in Italy, where he never qualified for a university teaching position. He died in 1908, at age 44. Although the once celebrated Gigli's operation has merely historical interest today, the favorable features of his wire saw make it a safe and efficient tool in the hands of twentieth-century neurosurgeons worldwide.
28
Santoso, Bagus Jati, F. X. Arunanto, Siti Rochimah y Dini Adni Navastara. "Rancang Bangun dan Implementasi Aplikasi Electronic Instrument Database System". Jurnal Ilmiah FIFO 11, n.º 1 (18 de junio de 2019): 1. http://dx.doi.org/10.22441/fifo.2019.v10i1.001.
Texto completoResumen
For all real-time industrial processes in a company, the entire system must be well-controlled to ensure an effective, efficient and reliable operations. Therefore, several electronic instruments are needed to measure physical quantities, such as temperature, pressure and others. As in one of the largest liquefaction natural gas processing company in Indonesia which involves highly extensive production processes, the existence of electronic instruments is unquestionably essential to ensure the progression of the production process while avoiding risks.To increase the speed, accuracy and quality of data over the electrical instrument in the company, it is necessary to build an electronic instrument data processing application system, called the Electronic Instrument Database System (ELIDA), so that it can provide convenience for the users in managing and monitoring the data of electronic instrument. The built ELIDA system will be integrated with several existing Oracle-based systems, including EBS-SCM for supply chain management, EBS-EAM for Enterprise Asset Management, and Oracle HRMS for human resource management so that the data consistency and the operational smoothness of the company can be ensured.Keywords : electronic instrument, database, application AbstrakUntuk semua proses yang berjalan real-time di perusahaan, keseluruhan sistem harus dikendalikan secara baik untuk menjamin operasional yang efektif, efisien, dan handal. Karenanya, beberapa perangkat instrumen elektronik diperlukan untuk mengukur kuantitas fisikal seperti temperatur, tekanan, dan lainnya. Tak terkecuali di salah satu perusahaan pengolahan gas alam cair terbesar di Indonesia dimana melibatkan proses produksi yang sangat panjang, keberadaan perangkat instrumen elektronik mutlak diperlukan untuk menjamin jalannya proses produksi sekaligus menghindarkan terjadinya resiko.Dalam upaya peningkatan kecepatan, keakurasian, dan kualitas data-data instrumen di perusahaan tersebut, perlu dibangun sistem aplikasi pengolahan data instrument elektronik, atau disebut Electronic Instrument Database System (ELIDA), sehingga dapat memberikan kemudahan bagi pengguna data-data instrumen elektronik untuk melakukan pengelolaan dan pemantauan. Sistem ELIDA yang dibangun akan menggunakan framework Spring Hibernate dan terintegrasi dengan beberapa sistem berbasis Oracle yang sudah berjalan sebelumnya, diantaranya EBS-SCM untuk manajemen rantai pasok, EBS-EAM untuk manajamen aset perlengkapan, dan Oracle HRMS untuk manajemen sumber daya manusia sehingga konsistensi data dan kelancaran operasional perusahaan dapat terjamin.Kata Kunci: instrumen elektronik, basis data, aplikasi
29
Handika, I. Putu Susila y I. Gede Totok Suryawan. "Rancang Bangun Document Management System Untuk Mengelola Dokumen Standart Operational Procedure". Jurnal Teknologi Informasi dan Ilmu Komputer 4, n.º 3 (20 de septiembre de 2017): 173. http://dx.doi.org/10.25126/jtiik.201743334.
Texto completo
30
Asmar, Asmar. "RANCANG BANGUN UNIPOLAR PWM DILENGKAPI DENGAN PENGATURAN FREKUENSI MENGGUNAKAN OPERATIONAL AMPLIFIER". Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) 6, n.º 1 (10 de abril de 2019): 20–23. http://dx.doi.org/10.33019/ecotipe.v6i1.942.
Texto completoResumen
Pulse Width Modulation (PWM) diaplilaksikan pada rangkaian elektronika daya untuk pengendalian rangkaian konverter. Agar diperoleh kinerja yang baik, frekuensi pulsa PWM harus disesuaikan dengan jenis dan parameter konverter. Pada penelitian ini, pulsa PWM yang dihasilkan adalah unipolar PWM. Pulsa tersebut diperoleh dengan menggunakan tiga rangkaian utama, yaitu pembangkit gelombang segitiga, tegangan kontrol dan rangkaian pembanding. Komponen utama yang digunakan adalah Operational Amplifier (Op-Amp). Rangkaian yang dihasilkan dapat membangkitkan pulsa unipolar PWM dengan rentang frekuensi 30 Hz sampai dengan 5 kHz.
31
Saputra, Nofrinaldi Saputra, Muchlisinalahuddin Muchlisinalahuddin y Armila Armila. "Rancang Bangun Mesin Pencetak Bakso". Jurnal Teknik Mesin 15, n.º 2 (30 de diciembre de 2022): 115–20. http://dx.doi.org/10.30630/jtm.15.2.859.
Texto completoResumen
This research to design a smaller and easy to operate meatball maker machine. This design will simplify, speed up and minimize the energy expended in the meatball maker machine. Simulation of frame strength using Solidwork 2018. The simulation value of von Mises stress on the frame is with a maximum stress of 10,550,430.00 N/m2 and a minimum of 90,629 N/m2 with a yield strength of 250,000,000.00 N/m2. Displacement in the simulation of displacement is with a maximum value of 0.154 mm and a minimum of 0.000 mm. The value of the safety factor from the simulation results is 24. Static simulation results of the strength of the meatball printing machine frame using ASTM A36 Steel L 30 mm x 30 mm 3 mm thick with a load of 25 kg, the frame is able to withstand engine performance during operation.
32
Sonong, Sonong, Herman Nauwir y Muhammad Ruswandi Djalal. "Rancang Bangun Modul Pembelajaran Bengkel Listrik (Designing Electric Workshop Learning Modules)". JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA) 3, n.º 1 (3 de abril de 2019): 1. http://dx.doi.org/10.21070/jeee-u.v3i1.1924.
Texto completoResumen
Electric motor is an electric machine that has a function as a converter of electrical energy into mechanical energy. Electric motors are widely used as movers because they are better in terms of technical and economical, but have disadvantages such as large initial currents so that they cannot last long, to overcome this can be used Y-utan star starting method both manually and automatically created in a panel box. In the operation and manufacture of a protection system for a 3 phase induction motor, some supporting equipment can be arranged in a panel box so that motor performance can be maximized. The results of this tool design are in the form of a panel box in which there are three types of circuits, namely: 3 phase induction motor operation circuit with the starting Y-∆ automatically, reversing the direction of 3 phase induction motor rotation, and 3 phase induction motor operation in two places. Where the series is equipped with a protection system and can be operated manually and automatically.
33
王, 晓宇. "Short-Term Optimal Operation of Banduo Reservoir in the Source of Yellow River". Journal of Water Resources Research 06, n.º 01 (2017): 24–32. http://dx.doi.org/10.12677/jwrr.2017.61004.
Texto completo
34
Amrin, Amrin y Muhammad Reza Aldiansyah. "Model Waterfall Untuk Rancang Bangun Sistem Informasi Pengadaan Mesin EDC Pada E-Channel Operations Perbankan". INSANtek 2, n.º 2 (1 de diciembre de 2021): 51–56. http://dx.doi.org/10.31294/instk.v2i2.668.
Texto completoResumen
Dalam era globalisasi sekarang ini, teknologi informasi melaju dengan cepatnya. Adapun komputer yang merupakan peralatan yang diciptakan untuk mempermudah pekerjaan manusia, saat mencapai kemajuan baik di dalam pembuatan hardware maupun software. E-Channel Operations Perbankan membutuhkan sekali adanya suatu sistem informasi yang menunjang dan memberikan pelayanan yang memudahkan bagi para karyawannya. Sistem pengadaan yang digunakan E-Channel Operations Perbankan masih dilakukan secara manual, yaitu dengan membuat surat permintaan setiap kali melakukan pengadaan mesin baru. Perancangan sistem informasi pengadaan mesin EDC berbasis web merupakan solusi yang terbaik untuk memecahkan permasalahan- permasalahan yang ada pada perusahaan ini, serta dengan sistem yang terkomputerisasi dapat tercapai suatu kegiatan yang efektif dan efisien dalam menunjang aktifitas pada perusahaan ini. Metode yang digunakan untuk pengembangan perangkat lunak adalah metode waterfall. Hasil dari penelitian ini adalah dengan adanya aplikasi pengadaan mesin EDC, dapat mempermudah pegawai yang terkait dalam proses pengadaan secara real time, pembuatan laporan dapat dilakukan secara cepat dan tepat.serta penyimpanan data menjadi lebih aman.
35
Muchyidin, Arif, Lefi Nurlatif y Indah Nursuprianah. "Miskonsepsi Siswa pada Pemahaman Konsep Bangun Ruang". JRPM (Jurnal Review Pembelajaran Matematika) 5, n.º 2 (26 de diciembre de 2020): 72–86. http://dx.doi.org/10.15642/jrpm.2020.5.2.72-86.
Texto completoResumen
The purpose of this study is to describe 8th-grade students’ misconceptions in solving surface area and volume of beam and cube problems and their causal factors. This is qualitative descriptive research. Based on the research, students’ misconceptions in solving surface area and volume of beam and cube problems are misconceptions on the concept of a beam, misconceptions on the concept of the cube, misconceptions on the concept of prerequisite material, misconceptions on unit comprehension, misconceptions on the understanding of meaning, and misconceptions on sign and number operations. While the causal factors of misconception are students’ assumptions about the lack of importance of concepts so students only memorize formulas, students are not able to associate one concept with other concepts, lack of understanding concepts in prerequisite material, misunderstanding the meaning of words in a problem, students have difficulty understanding pictures., misunderstanding the difference in the size of area and length.
36
Mabruri, Rifqi Tri, Arifah Indah Setyorini y Bagus Izzan Muafy. "Rancang Bangun Sistem Informasi Koperasi SMA Negeri 1 Bumiayu Berbasis Web". UPGRADE : Jurnal Pendidikan Teknologi Informasi 1, n.º 1 (14 de agosto de 2023): 17–26. http://dx.doi.org/10.30812/upgrade.v1i1.3152.
Texto completoResumen
The cooperative information system for SMA Negeri 1 Bumiayu is a computer-based application that aims to manage and facilitate cooperative operations within the school environment. The system is designed to help manage administration, finance, inventory, and transactions with consumers in a more structured and efficient manner. The cooperative information system for SMA Negeri 1 Bumiayu will provide benefits to various parties such as collective management and cooperative members who manage finances, be able to make decisions based on accurate information, easily access cooperative information, and monitor membership contributions. The benefits provided to consumers are in the form of convenience in transactions that can be made online with e-money, a list of items that can be monitored without having to come to the cooperative. They can arrange transaction times according to needs. The customers consist of teachers, staff, and SMA Negeri 1 Bumiayu students. With the implementation of the cooperative information system, the transaction process will be able to increase the effectiveness and efficiency of cooperative operations. In addition, this information system can provide a better experience for cooperative members in managing finances, improve business skills, and build awareness of the importance of cooperation and responsibility in the school environment.
37
Pearson, Connor A., Tom D. Allen y Mark A. Battley. "Numerical Water Impacts of 2D Hull Forms using Dynamic Overset Meshing". Journal of Sailing Technology 7, n.º 01 (19 de diciembre de 2022): 228–54. http://dx.doi.org/10.5957/jst/2022.7.11.228.
Texto completoResumen
The phenomenon of slamming is often the critical design load for high-performance marine craft. Slamming involves the solid-fluid impact of a hull structure, resulting in large forces acting on the structure from the large volume of water displaced in a very short time frame. Due to its importance in the design and operation of marine craft, the impact of ship forms into water has been the focus of a significant body of literature. These studies have primarily focused on rigid shapes, so the effects of hydroelasticity have not been examined in detail. This paper presents a robust and practical methodology for simulating water impacts involving overset meshing and the Volume of Fluid (VOF) method using the Ansys Fluent 2021 R1 Computational Fluid Dynamics (CFD) solver. The framework involves a high resolution dynamic overset mesh attached to the body in a coarse static Cartesian background mesh. Results for a simple 2D wedge impact are compared to experimental and analytical results and a good agreement to the validation material is observed. A 2D transverse section based on the IMOCA60 racing yacht Banque Populaire VIII is then analysed to obtain impact force and pressures. Results capture the peaked pressure distributions characteristic of slamming, with possible effects of air entrapment. The methodology presented is applicable for designers of high-performance sailing craft to improve the prediction of hydrodynamic loading on their hull-form designs. The overset method can quickly and easily be applied to a number of different geometries and impact events with minor changes between models.
38
Muhammad Ali Imran, Achmad Fauzi y Husnul Khair. "Rancang Bangun Kontrol Bel Otomatis Berdasarkan Jadwal Perkuliahan Menggunakan Internet of Things (IoT)". Modem : Jurnal Informatika dan Sains Teknologi. 2, n.º 4 (12 de septiembre de 2024): 21–32. http://dx.doi.org/10.62951/modem.v2i4.225.
Texto completoResumen
The Internet of Things (IoT)-based automatic bell system is designed to enhance the efficiency of bell operations in educational institutions by utilizing modern technology. This research aims to develop a system that can control the bell automatically according to the class schedule, while also enabling remote control via a mobile application using the Blynk platform. The system is built using an ESP8266 as the main microcontroller, a DFPlayer Mini module for audio playback, and an RTC DS1307 for time management. The results show that the system functions as expected, both in automatic mode based on the schedule and in manual mode through the mobile application. Testing and debugging demonstrated that integration with WiFi networks allows for flexible and effective bell control. For further development, it is recommended to add a power backup feature, web interface, and push notifications to improve system reliability and flexibility. This system provides an efficient and practical IoT solution for automating bell operations in educational environments.
39
Suwandi, Suwandi, Aldo Hermaya Aditiya Nur Karsa y Marsani Asfi. "Rancang Bangun Aplikasi Manajemen Penjualan Konsyinasi Pada Perusahaan Dagang". Jurnal Syntax Admiration 5, n.º 4 (29 de abril de 2024): 1240–48. http://dx.doi.org/10.46799/jsa.v5i4.1087.
Texto completoResumen
Habib Mart Cirebon is a trading company that distributes various Hajj souvenirs such as dates, koko clothes, prayer mats, zam-zam water, and others. Consignment sales management is becoming a key element in the trading industry, ensuring product availability, stock monitoring and accurate sales reporting. This research aims to design and develop a consignment sales management application to improve the operational efficiency of the Habib Mart Trading Company in Cirebon. The Waterfall software development method was chosen to ensure structured and planned development stages. It is hoped that the results of this research can contribute to improving operational efficiency and more timely managerial decisions at the Habib Mart Trading Company. In addition, the designed application can also be adapted by other trading companies to improve their consignment sales management..
40
Agustina, Candra y Sardiarinto . "Rancang Bangun Aplikasi Elektronik Transportasi Bandara Yogyakarta International Airport Berbasis Mobile Menggunakan Android Studio". Jurnal Teknologi Informasi dan Terapan 7, n.º 2 (21 de diciembre de 2020): 113–17. http://dx.doi.org/10.25047/jtit.v7i2.136.
Texto completoResumen
Abstract— Yogyakarta International Airport is a new airport in Yogyakarta, located in Temon, Kulonprogo Regency. Yogyakarta International Airport began operations on May 6, 2019. It was marked by the first landing of Citilink from Halim Perdanakusuma Jakarta. To support airport operations, the Transportation Department also prepares supporting transportation modes, such as airport trains, Damri Buses and, Shuttle Bus to get to the Airport. This mode of transportation connects cities around the airport, such as Purworejo, Magelang, Yogyakarta City, and even Surakarta City. However, because the airport is still relatively new, the information obtained by the public is still minimal. Therefore an informative application is needed for prospective passengers to go to or leave the airport. The application is made based on mobile, by utilizing GPS technology to monitor the position of the vehicle in real-time. This application will make it easier for visitors to travel to areas around YIA Airport.
41
Septiani, Ade, Han Sulaiman y Fajar Erlangga. "Rancang Bangun Sistem Pengolahan Biaya Operasional Delivery Bukalapak pada PT. Tigaraksa Satria, Tbk". DoubleClick: Journal of Computer and Information Technology 3, n.º 2 (4 de febrero de 2020): 83. http://dx.doi.org/10.25273/doubleclick.v3i2.5543.
Texto completoResumen
<p align="center"><strong><em>Abstract</em></strong></p><p><em>Information technology that is developing at this time is very varied, according to the needs of the company, especially operational finance. Utilization of information technology is one way to solve the problems faced in reporting and realization. The purpose of this study is to describe the system that runs on Bukalapak delivery operational processing costs at PT. Tigaraksa Satria, Tbk, designed an integrated and well-structured Bukalapak delivery operational cost management system and described the results of the trial run of Bukalapak's delivery operational processing cost management system. The system design method used is Research And Development.</em></p><p> </p>
42
Alfiansyah, Mohamad Reza, Samuel Ramos y Iskandar Zulkarnain. "Rancang Bangun Aplikasi Operation Service Mesin Elektronik Data Capture Bank Negara Indonesia Berbasis Web". Eksplorasi Teknologi Enterprise dan Sistem Informasi (EKSTENSI) 1, n.º 2 (30 de mayo de 2023): 54–61. http://dx.doi.org/10.59039/ekstensi.v1i2.7.
Texto completoResumen
Bank Negara Indonesia has been established as the oldest recorded commercial bank in the history of the Republic of Indonesia and was formed as the central bank on July 5, 1949. Within the BNI banking system, there is management of Electronic Data Capture (EDC) machines that support service operations. However, the system is still partially computerized and utilizes applications like Microsoft Excel. The current issue faced is the occurrence of inaccurate data and insufficient monitoring of the ongoing data when using the existing system. To address this, this research aims to develop a system by implementing the Unified Modeling Language (UML) as the system modeling method. The system will be built using PHP, a web-based programming language, and MySQL, a relational database management system, which operates on a client-server model.
43
Raharjo, Agung, Eko Kuncoro y Imam Azhar. "RANCANG BANGUN TRACKING ARAH TEMBAKAN MENGGUNAKAN SENSOR POSISI BERBASIS PID". TELKA - Telekomunikasi Elektronika Komputasi dan Kontrol 7, n.º 1 (24 de mayo de 2021): 43–48. http://dx.doi.org/10.15575/telka.v7n1.43-48.
Texto completoResumen
Seiring dengan perkembangan teknologi komunikasi dan otomasi, pelaksanaan tugas militer dapat dibantu dengan mengembangkan alutsista militer. Salah satunya pengembangan robot tempur yang akan digunakan sebagai alat untuk membantu tugas operasi jarak jauh pada satuan tempur TNI AD. Pada robot tempur tersebut akan ditanamkan sistem komunikasi data berupa perintah kendali laju robot, perintah kendali senjata serang, dan sistem visualisasi yang dapat digunakan untuk mendukung pergerakan robot hingga mencapai sasaran yang ditentukan, serta sebagai sistem penginderaan jarak jauh robot tempur untuk memonitor area musuh yang akan ditinjau. Operator menggunakan sebuah joystick untuk mengendalikan robot tempur dan tablet Android untuk memantau dan mendeteksi arah sasaran. Penelitian ini membahas tentang perancangan pendeteksian sasaran tembak yang dapat dikendalikan dari jarak jauh. Metode yang digunakan adalah metode eksperimen berbasis PID. Penelitian ini berfokus pada pendeteksian sasaran tembak yang nantinya akan terhubung dengan Raspberry Pi 3, sehingga senjata dapat mendeteksi adanya sasaran tembak yang ada di dalam jangkauan sensor posisi. Hasil dari penelitian menunjukkan bahwa robot dapat dikendalikan dengan mudah menggunakan joystick dan secara real-time terlihat pada layar Android yang terpasang pada kontrol joystick tersebut. Selain itu, sistem juga dapat membedakan antara sasaran tembak dan objek yang bukan sasaran tembak. Penelitian ini diharapkan dapat mendukung tugas operasi personel TNI dalam menjalankan misinya dengan memanfaatkan robot tempur. Along with the development of communication and automation technology, the implementation of military duties can be assisted by developing military defense equipment. One of them is the development of a combat robot that will be used as a tool to assist the task of long-distance operations on the Army combat unit. In the combat robot, a data communication system will be implanted in the form of a robot rate control command, an attack weapon control command, and a visualization system that is used to support the robot's movement to reach the target specified as a combat robot's remote sensing system for monitoring enemy areas to be reviewed. The operator has used a joystick to control the combat robot and to detect the direction of the target can be monitored with an android tablet. This research discusses the design of the detection of target fire that can be controlled remotely. The method used is experimental based on PID. This research focused on detecting firing targets that will be connected with Raspberry Pi 3 so that the weapon can detect the presence of firing targets within the position sensor. The results of the research show that the robot can be easily controlled using a Joystick and in real-time visible on the Android screen mounted on the Joystick control, the system can distinguish between target shooting and non-target objects. This research is expected to support the operational duties of army personnel in carrying out their missions by utilizing combat robots.
44
Budiman, Budiman, Rd Yadi Rakhman Alamsyah y Ahmad Fauzi Ramadhan. "Rancang Bangun Aplikasi Operasional Departemen Finance Studi Kasus PT. Maja Kerta Wangi". NUANSA INFORMATIKA 17, n.º 2 (12 de julio de 2023): 10–18. http://dx.doi.org/10.25134/ilkom.v17i2.12.
Texto completoResumen
The large number of travel document transactions, credit cards, and invoice payments is a problem that complicates the finance department. In actual work, many travel documents are printed more than once, which burdens printing costs, loads the capacity of archive space which must be stored for five years, and requires destroying documents whose expired shelf life. The verification and validation process carried out by officers experienced problems because the system had not been integrated, so travel documents became past due and caused delays in supplier payments. The design and construction of operational applications for the finance department aim to digitize and integrate operational and financial processes to become combined, especially in managing travel documents, debt cards, and bill payments. The software development method used in this study is the waterfall which consists of the stages of analysis, design, implementation, and testing. Based on the testing results, the application shows that the application can assist in the operational process of the financial section, especially the data collection of travel documents into debt cards, then processing and paying bills based on invoices.
45
Karyadi, Kukuh y Jatmiko Endro Suseno. "RANCANG BANGUN PROTOTIPE SISTEM KENDALI IRON REMOVAL FILTER (IRF) PADA UNIT PENGOLAHAN AIR BERSIH BERBASIS PLC". Gema Teknologi 20, n.º 2 (23 de mayo de 2019): 60. http://dx.doi.org/10.14710/gt.v20i2.23100.
Texto completoResumen
Kukuh Karyadi, Jatmiko Endro Suseno in this paper explain that Water is a necessity of life that is very important for mankind. The availability of clean water has been sought to be fulfilled in various ways. One of them is by making a clean water treatment plant that can process water that is not yet suitable for consumption to be more feasible and ready to be consumed for everyday life. The operation of water treatment plant is still manually operated such as in the Iron Removal Filter (IRF) control system so that the processing is not easy to operate. To facilitate the operation of a clean water treatment unit, a control system based on a Programmable Logic Controller (PLC) is created on the Iron Removal Filter (IRF) processing unit. Control system consisting of PLC, relay circuit, power supply and Human Machine Interface (HMI), works to control the clean water processing unit including controlling the process on the IRF automatically. Also made a prototype of a water treatment plant consisting of an aerator unit, an IRF unit, a storage tank, several pumps and several control valves to be controlled by the control system in operation. The control system uses PLC as a control center because PLC is a controller that is simple, easy to program and very reliable as already widely used in the industrial world. The PLC brand used is Omron because it is cheap, reliable and has software named CX-Programmer which is easy in programming. The control system uses laptop computer as an HMI in the operation. HMI uses VTScada software and is connected to a PLC using OPC CX-Server software. The control system that is made can control the clean water processing unit in the form of a prototype. Operation on HMI is so easy and has a very attractive appearance. So it is highly recommended to be used in the actual clean water treatment unit
46
Falahuddin, Muhamad Anda, Asep Puloh, Sumeru Sumeru, Muhammad Arman, Wirenda Sekar Ayu y Susilawati Susilawati. "Design and Build a Particle Counter for IoT-Based Monitoring of PM1, PM2.5 and PM10 Concentrations in the Air". Jurnal Otomasi Kontrol dan Instrumentasi 16, n.º 2 (2024): 85–94. http://dx.doi.org/10.5614/joki.2024.16.2.3.
Texto completoResumen
Poor air quality is a serious health and environmental issue. Microscopic particles such as PM1, PM2.5, and PM10 cause respiratory disorders and other health problems. Therefore, accurate and continuous air quality monitoring is crucial to mitigate the impacts of air pollution. This research aims to design an Internet of Things (IoT)--based particle counter capable of real-time air quality monitoring and reporting via an online platform. The system utilizes a PMS5003 sensor to measure PM1, PM2.5, and PM10 concentrations precisely. Data from the sensor is processed by an ESP8266 microcontroller connected to the internet, enabling direct data transmission to an online platform for further analysis and visualization. Testing is done by creating a 1x1x1 meter testing chamber to simulate various environmental conditions and validate the device's performance. Results show that the particle counter provides accurate data, with an error rate of less than 10% compared to standard devices. The device demonstrates reliable operation across different environmental conditions, showcasing its robustness in practical applications. This IoT-based particle counter offers an innovative solution for effective and efficient air quality monitoring. It is expected to significantly contribute to human health protection efforts and minimize the adverse environmental impacts of air pollution.
47
Widyastoety, Dahlia. "Rancang Bangun Sistem Inventory Data Barang Berbasis Web". INOVA-TIF 2, n.º 1 (5 de enero de 2020): 79. http://dx.doi.org/10.32832/inova-tif.v1i2.2779.
Texto completoResumen
<p>PT Graha Sarana Duta established since 1981 engaged in providing office building, building maintenance and maintenance services. At present the system is still manual which causes the company's performance to be hampered and has not been able to support all the needs of the company such as a report that is long enough to report so that management waits long to get it. This study aims to analyze and design a web-based inventory system that can present the information needed by the company. Operations that run on this system are: input data for outgoing goods, input data for incoming goods, input data for supplier, work order, incoming goods report, outgoing goods report, ready stock report,work order report and goods check. The development tools used in this research are using PHP.5.2.2 as a programming language and MySQL version 5.0.41 as the database, these were all chosen because of their reliability in making a web-based system. Design and design an inventory system for PT Graha Sarana Duta. This Inventory system is web based so it is more dynamic and can be used easily. The system is used to manage data items that occur in the warehouse with various menus available.</p>
48
Rianis, Baiq, Wire Bagye y Saeful Hamdi. "RANCANG BANGUN SISTEM INFORMASI P-COM EDUCATION CENTRE BERBASIS WEB". Jurnal Teknik Mesin, Elektro dan Ilmu Komputer 3, n.º 1 (24 de marzo de 2023): 01–14. http://dx.doi.org/10.55606/teknik.v3i1.901.
Texto completoResumen
The Praya Computer Eduction Center is currently experiencing a decline in registration due to the lack of information that is widely disseminated to people who cannot be reached by previously used information media such as brochures, radio, newspapers and so on, therefore we need a medium that can be achieved by other alternatives. that can support the information spread widely, especially for those who are far away. In this study, the calculation of SUS data is used to determine the efficiency of this Education Information sistem. From the results of the blackbox test to sistem this information, it shows quite good results with no obstacles obtained when inputting, editing, deleting. For further follow-up, the management of the P-COM Education Center is expected to carry out more operations on this information sistem to obtain information SISTEM methods so that they can be used in the long term.
49
Gultom, Willy Gusllah, Harold Situmorang, Sri Ulina y Khairil Abdillah. "RANCANG BANGUN VACUM PADA SUCTION PUMP BERBASIS MIKROKONTROLLER". JURNAL MUTIARA ELEKTROMEDIK 6, n.º 2 (28 de diciembre de 2022): 39–45. http://dx.doi.org/10.51544/elektromedik.v6i2.3566.
Texto completoResumen
Suction Pump is a medical device that functions to suck fluids that are not needed by the body during the operation process, such as blood, stomach contents, and so on. Then the sucked liquid is accommodated in a container. Suction mostly still uses a manometer to read the results of the pressure sucked by the motor so that the user has difficulty reading it, the author makes modifications to the suction pump which is equipped with a pressure sensor. This sensor will change the results of the suction pressure on the vacuum motor into digital which will be displayed on the LCD. This research will be conducted at the Sari Mutiara University lab. The type of research method is experimental research, namely conducting direct experiments on tools designed to build. The measurement results of the suction pressure will be displayed on the LCD, with measurements according to the standard of the suction pump suction in general.
50
Sulaiman, Fauziah, Muhtar Lutfi y Rahmawati Muin. "KARAKTERISTIK DAN RANCANG BANGUN EKONOMI ISLAM". Tadayun: Jurnal Hukum Ekonomi Syariah 3, n.º 2 (11 de diciembre de 2022): 163–82. http://dx.doi.org/10.24239/tadayun.v3i2.84.
Texto completoResumen
Characteristics in Islamic Economics include the principles of aqidah, morals and law but the building is designed to be derived from the Qur'an, Sunnah, Ijma and Qiyas. Islam does not mean that the principle of equality or the same result is the will of Islamic teachings which is the same as in communism thought. This is contrary to the nature of humans created by Allah SWT. There are differences in the stage of intelligence and other abilities. The purpose of achieving falah in Islamic economics is the realization of pillars, namely basic operational values that appear in Islamic economic principles.
Abstrak
Karakteristik dalam Ekonomi Islam meliputi asas aqidah, akhlak dan hukum namun bangunannya dirancang agar berasal dari al-Qur’an, Sunnah, Ijma dan Qiyas. Agama Islam tidak memaknai bahwa prinsip sama rata atau hasilnya yang sama itu merupakan kehendak dari ajaran Islam yang sama halnya dalam pemikiran komunisme, hal ini bertentangan dengan fitarhnya manusia yang diciptakan oleh Allah SWT., adanya perbedaan pada tahap kecerdasan dan kemampuan lainnya. Adapun tujuan dari tercapainya falah dalam ekonomi Islam adalah terwujudnya pilar, yaitu nilai-nilai dasar, operasional yang nampak pada prinsip-prinsip ekonomi Islam.