Libros sobre el tema "Nickel alloys"

Ulrich, Heubner, ed. Nickel alloys. New York: Marcel Dekker, 1998.

Institute, Nickel, ed. Alloy selection for service in hydrogen fluoride, hydrofluoric acid and fluorine: A guide to the use of nickel-containing alloys. Toronto: Nickel Institute, 2019.

(Canada), Nickel Development Institute, ed. Nickel alloys for electronics. Toronto, Ont., Canada: The Institute, 1987.

Institute, Nickel, ed. Guidelines for the welded fabrication of nickel alloys for corrosion-resistant service: A practical guide for welders, material engineers and design engineers. Toronto: Nickel Institute, 2018.

Ulrich, Heubner, ed. Nickel alloys and high-alloy special stainless steels. Sindelfingen: Expert Verlag, 1987.

Ulrich, Heubner, ed. Nickel alloys and high-alloy special stainless steels. 2^a ed. Renningen-Malmsheim: Expert Verlag, 1998.

Isleib, C. R. Nickel alloys in today's electronics industry. Toronto: Nickel Development Institute, 1987.

R, Davis J. y ASM International. Handbook Committee., eds. Nickel, cobalt, and their alloys. Materials Park, OH: ASM International, 2000.

Allison, J. E. Fe-Ni-Cr alloys for coatings and electroforms. Pittsburgh, PA: U.S. Dept. of the Interior, Bureau of Mines, 1989.

Allison, J. E. Fe-Ni-Cr alloys for coatings and electroforms. Washington, DC: Dept. of the Interior, 1989.

Gendron, T. S. Irreversible embrittlement of alloy 600 in hydrogenated steam at 400 [degrees] C. Chalk River, Ont: System Chemistry and Corrosion Branch, Chalk River Laboratories, 1994.

Rahoi, Dennis W. Alloy 400 for use in high pressure feedwater heaters. Toronto, Ont: Nickel Development Institute, 1993.

Mwansa, Emmanuel. The electrodeposition of nickel-molybdenum alloys. Birmingham: University of Birmingham, 1989.

1949-, Nash P. y ASM International, eds. Phase diagrams of binary nickel alloys. Materials Park, OH: ASM International, 1991.

Lippold, John C. Welding metallurgy and weldability of nickel-base alloys. Hoboken, N.J: John Wiley & Sons, 2009.

United States. National Aeronautics and Space Administration., ed. The influence of chromium on structure and mechanical properties of B2 nickel aluminide alloys. [Washington, DC]: National Aeronautics and Space Administration, 1992.

United States. National Aeronautics and Space Administration., ed. The influence of chromium on structure and mechanical properties of B2 nickel aluminide alloys. [Washington, DC]: National Aeronautics and Space Administration, 1992.

United States. National Aeronautics and Space Administration., ed. Yielding and deformation behavior of the single crystal nickel-base superalloy PWA 1480. [Washington, DC]: National Aeronautics and Space Administration, 1986.

Doane, D. V. Modern carburized nickel alloy steels. Toronto, Ont: Nickel Development Institute, 1990.

Ulʹi͡anin, E. A. Vysokolegirovannye korrozionnostoĭkie splavy. Moskva: "Metallurgii͡a", 1987.

Ellis, David L. Hot corrosion of the B2 nickel aluminides. [Washington, DC]: National Aeronautics and Space Administration, 1993.

Farrar, J. C. M. The alloy tree: A guide to low-alloy steels, stainless steels and nickel-base alloys. Cambridge: Woodhead, 2004.

Stephen, Lamb y Bringas John E. 1953-, eds. CASTI handbook of stainless steels & nickel alloys. 2^a ed. Edmonton: CASTI Pub., 2002.

author, Giler Roger y Nickel Development Institute (Canada), eds. Nickel-chromium alloys for electric resistance heating. Toronto, Ont: Nickel Development Institute, 1990.

Greaves, Mark Stephen. Directional recrystallisation of wrought nickel base alloys. Birmingham: University of Birmingham, 1992.

1953-, Bringas John E. y Lamb Stephen, eds. CASTI handbook of stainless steels & nickel alloys. Edmonton, Alberta, Canada: CASTI Publishing Ic., 1999.

Center, NASA Glenn Research, ed. Dual microstructure heat treatment of a nickel-base disk alloy. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2001.

Avery, Richard E. Nickel-containing materials for water control applications. Toronto, Ont.]: Nickel Development Institute, 1993.

D, Aggarwal M. y George C. Marshall Space Flight Center., eds. A study of microstructural characteristics of Ni-based superalloys at high temperatures: Final technical report. Normal, Ala: Dept. of Physics, Alabama Agricultural and Mechanical University, 1990.

D, Aggarwal M. y United States. National Aeronautics and Space Administration, eds. A study of microstructural characteristics of Ni-based superalloys at high temperatures: Semi-annual technical report. Normal, Ala: Dept. of Physics, Alabama Agricultural and Mechanical University, 1987.

United States. National Aeronautics and Space Administration., ed. A Study of microstructural characteristics of Ni-based superalloys at high temperatures: Semi-annual technical report. Normal, Ala: Dept. of Physics, Alabama Agricultural and Mechanical University, 1988.

Sreeramesh, Kalluri, McGaw Michael A y United States. National Aeronautics and Space Administration., eds. The influence of primary and secondary orientations on the elastic response of a nickel-base single-crystal superalloy. [Washington, DC: National Aeronautics and Space Administration, 1993.

United States. National Aeronautics and Space Administration., ed. Electron diffraction evidence for the ordering of excess nickel atoms by relation to stoichiometry in nickel-rich B'-NiAl formation of a nickel-aluminum (Ni2Al) superlattice. Washington, DC: National Aeronautics and Space Administration, 1988.

Harrington, Jonathan D. Nickel stainless steels and high-nickel alloys for flue gas desulfurizsation systems. Toronto, Ont: Nickel Development Institute, 1987.

Harrington, Jonathan D. Nickel stainless steels and high-nickel alloys for flue gas desulfurizsation systems. Toronto, Ont., Canada: The Institute, 1987.

Fairhurst, S. The toxicity of nickel and its inorganic compounds. London: H.M.S.O., 1987.

R, Bowman R., Nathal Michael V y United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Physical and mechanical metallurgy of NiAl. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1994.

Bransford, J. W. Ignition characteristics of the nickel-based alloy UNS N07001 in pressurized oxygen. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1990.

Yoshiki-Gravelsins, Karen S. The Thermodynamic properties of Ni-Fe-S-O melts. Toronto, Ont: University of Toronto, 1988.

Gi͡unter, V. Ė. Nikelid titana: Medit͡sinskiĭ material novogo pokolenii͡a. Tomsk: NII medit͡sinskikh materialov i implantatov s pami͡atʹi͡u formy Sibirskogo fiziko-tekhnicheskogo instituta pri Tomskom gos. universitete, 2006.

Gérard, Béranger, ed. The iron-nickel alloys: A hundred years after the discovery of invar--. Andover, UK: Intercept Ltd., 1996.

W, Bransford J. y National Institute of Standards and Technology (U.S.), eds. Ignition characteristics of the nickel-based alloy UNS N07718 in pressurized oxygen. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1989.

James, William F. Mechanical properties of inconel 718 and nickel 201 alloys after thermal histories simulating brazing and high temperature service. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1985.

Berkovits, Avraham. Modelling fatigue damage accumulation in nickel base superalloys: Final report. Haifa: Technion-Israel Institute of Technology, Faculty of Aerospace Engineering, 1992.

Institute, Nickel, ed. Alloy selection for service in sulphuric acid: A guide to the use of nickel-containing alloys. Toronto, Ont: Nickel Institute, 2019.

Khoperia, Teimuraz N. Electroless deposition of metals and alloys for new challenges in nanotechnology, electronics and catalysis. Hauppauge, New York: Nova Science Publishers, Inc., 2013.

American Welding Society. Committee on Filler Metals and Allied Materials., American Welding Society. Technical Activities Committee., American Welding Society y American National Standards Institute, eds. Specification for nickel and nickel-alloy bare welding electrodes and rods. Miami, Fla: American Welding Society, 2005.

Duncan, Adrian. Cracking in the welding of cupro-nickel alloys. Birmingham: University of Aston. Department of Mechanical and Production Engineering, 1985.

Ulʹi͡anin, E. A. Korrozionnostoĭkie splavy na osnove zheleza i nikeli͡a. Moskva: "Metallurgii͡a", 1986.

Symposium on Advanced Technologies for Superalloy Affordability (2000 Nashville, Tenn.). Advanced technologies for superalloy affordability: Proceedings of a symposium. Warrendale, Pa: TMS, 2000.