Bibliografías temáticas / Nanoscale corrosion

Literatura académica sobre el tema "Nanoscale corrosion"

Autor: Grafiati
Publicado: 14 de marzo de 2023

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Índice

Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Nanoscale corrosion".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Artículos de revistas sobre el tema "Nanoscale corrosion"

1

Zhu, Ping, Qiang Zhang, Yixiao Xia, Kai Sun, Xiu Lin, Huasong Gou, Serge Shil’ko y Gaohui Wu. "Effect of Nanoscale W Coating on Corrosion Behavior of Diamond/Aluminum Composites". Nanomaterials 13, n.º 2 (11 de enero de 2023): 307. http://dx.doi.org/10.3390/nano13020307.

Texto completo
Resumen
The stability of diamond/aluminum composite is of significant importance for its extensive application. In this paper, the interface of diamond/aluminum composite was modified by adding nanoscale W coating on diamond surface. We evaluated the corrosion rate of nanoscale W-coated and uncoated diamond/aluminum composite by a full immersion test and polarization curve test and clarified the corrosion products and corrosion mechanism of the composite. The introduction of W nanoscale coating effectively reduces the corrosion rate of the diamond/aluminum composite. After corrosion, the bending strength and thermal conductivity of the nanoscale W-coated diamond/aluminum composite are considerably higher than those of the uncoated diamond/aluminum composite. The corrosion loss of the material is mainly related to the hydrolysis of the interface product Al4C3, accompanied by the corrosion of the matrix aluminum. Our work provides guidance for improving the life of electronic devices in corrosive environments.
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Ma, Haoran y Roland Bennewitz. "Relationship between corrosion and nanoscale friction on a metallic glass". Beilstein Journal of Nanotechnology 13 (18 de febrero de 2022): 236–44. http://dx.doi.org/10.3762/bjnano.13.18.

Texto completo
Resumen
Metallic glasses are promising materials for microdevices, although corrosion and friction limit their effectiveness and durability. We investigated nanoscale friction on a metallic glass in corrosive solutions after different periods of immersion time using atomic force microscopy to elucidate the influence of corrosion on nanoscale friction. The evolution of friction upon repeated scanning cycles on the corroded surfaces reveals a bilayer surface oxide film, of which the outer layer is removed by the scanning tip. The measurement of friction and adhesion allows one to compare the physicochemical processes of surface dissolution at the interface of the two layers. The findings contribute to the understanding of mechanical contacts with metallic glasses under corrosive conditions by exploring the interrelation of microscopic corrosion mechanisms and nanoscale friction.
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Kvryan, Armen, Corey Efaw, Kari Higginbotham, Olivia Maryon, Paul Davis, Elton Graugnard, Hitesh Trivedi y Michael Hurley. "Corrosion Initiation and Propagation on Carburized Martensitic Stainless Steel Surfaces Studied via Advanced Scanning Probe Microscopy". Materials 12, n.º 6 (21 de marzo de 2019): 940. http://dx.doi.org/10.3390/ma12060940.

Texto completo
Resumen
Historically, high carbon steels have been used in mechanical applications because their high surface hardness contributes to excellent wear performance. However, in aggressive environments, current bearing steels exhibit insufficient corrosion resistance. Martensitic stainless steels are attractive for bearing applications due to their high corrosion resistance and ability to be surface hardened via carburizing heat treatments. Here three different carburizing heat treatments were applied to UNS S42670: a high-temperature temper (HTT), a low-temperature temper (LTT), and carbo-nitriding (CN). Magnetic force microscopy showed differences in magnetic domains between the matrix and carbides, while scanning Kelvin probe force microscopy (SKPFM) revealed a 90–200 mV Volta potential difference between the two phases. Corrosion progression was monitored on the nanoscale via SKPFM and in situ atomic force microscopy (AFM), revealing different corrosion modes among heat treatments that predicted bulk corrosion behavior in electrochemical testing. HTT outperforms LTT and CN in wear testing and thus is recommended for non-corrosive aerospace applications, whereas CN is recommended for corrosion-prone applications as it exhibits exceptional corrosion resistance. The results reported here support the use of scanning probe microscopy for predicting bulk corrosion behavior by measuring nanoscale surface differences in properties between carbides and the surrounding matrix.
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Liu, Yaru, Qinglin Pan, Xiangdong Wang, Ye Ji, Qicheng Liu, Zhiqi Huang, Zhuowei Peng y andWeiyi Wang. "Computational and Experimental Insights into the Role of Acidic Molecules on the Corrosion Behavior on 7A46 Aluminum Alloy". Journal of Nanoscience and Nanotechnology 21, n.º 4 (1 de abril de 2021): 2221–33. http://dx.doi.org/10.1166/jnn.2021.19087.

Texto completo
Resumen
The corrosion mechanisms for different corrosive media on the aged 7A46 aluminum alloy were systematically investigated at nanoscale level. The combination of empirical intergranular and exfoliation corrosion behavior was employed, and coupled with first-principles calculations. Results revealed that the dispersed distribution of matrix precipitates (MPs) leads to the enhancement of the corrosion resistance pre-ageing (PA) followed by double-ageing (PA-DA) alloy. The deepest corrosion depth of PA-DA alloy was in hydrochloric acid, and the calculation result demonstrates that the passivation effect in combination with the accumulation of corrosion products in nitric acid protect the PA-DA alloy from further corrosion.
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Hoque, Md Ashraful, Chun-Wei Yao, Mukunda Khanal y Ian Lian. "Tribocorrosion Behavior of Micro/Nanoscale Surface Coatings". Sensors 22, n.º 24 (17 de diciembre de 2022): 9974. http://dx.doi.org/10.3390/s22249974.

Texto completo
Resumen
Wear and corrosion are common issues of material degradation and failure in industrial appliances. Wear is a damaging process that can impact surface contacts and, more specifically, can cause the loss and distortion of material from a surface because of the contacting object’s mechanical action via motion. More wear occurs during the process of corrosion, in which oxide particles or debris are released from the contacting material. These types of wear debris and accumulated oxide particles released during corrosion cause a combination of wear-corrosion processes. Bringing together the fields of tribology and corrosion research, tribocorrosion is a field of study which deals with mechanical and electrochemical interactions between bodies in motion. More specifically, it is the study of mechanisms caused by the combined effects of mechanical stress and chemical/electrochemical interactions with the environment. Tribocorrosion testing methods provide new opportunities for studying the electrochemical nature of corrosion combined with mechanical loading to establish a synergistic relationship between corrosion and wear. To improve tribological, mechanical, and anti-corrosion performances, several surface modification techniques are being applied to develop functional coatings with micro/nano features. This review of the literature explores recent and enlightening research into the tribocorrosive properties of micro/nano coatings. It also looks at recent discussions of the most common experimental methods and some newer, promising experimental methods in tribocorrosion to elucidate their applications in the field of micro/nano coatings.
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Guo, Tianqi, Jean-Claude Scimeca, Sašo Ivanovski, Elise Verron y Karan Gulati. "Enhanced Corrosion Resistance and Local Therapy from Nano-Engineered Titanium Dental Implants". Pharmaceutics 15, n.º 2 (17 de enero de 2023): 315. http://dx.doi.org/10.3390/pharmaceutics15020315.

Texto completo
Resumen
Titanium is the ideal material for fabricating dental implants with favorable biocompatibility and biomechanics. However, the chemical corrosions arising from interaction with the surrounding tissues and fluids in oral cavity can challenge the integrity of Ti implants and leach Ti ions/nanoparticles, thereby causing cytotoxicity. Various nanoscale surface modifications have been performed to augment the chemical and electrochemical stability of Ti-based dental implants, and this review discusses and details these advances. For instance, depositing nanowires/nanoparticles via alkali-heat treatment and plasma spraying results in the fabrication of a nanostructured layer to reduce chemical corrosion. Further, refining the grain size to nanoscale could enhance Ti implants’ mechanical and chemical stability by alleviating the internal strain and establishing a uniform TiO2 layer. More recently, electrochemical anodization (EA) has emerged as a promising method to fabricate controlled TiO2 nanostructures on Ti dental implants. These anodized implants enhance Ti implants’ corrosion resistance and bioactivity. A particular focus of this review is to highlight critical advances in anodized Ti implants with nanotubes/nanopores for local drug delivery of potent therapeutics to augment osseo- and soft-tissue integration. This review aims to improve the understanding of novel nano-engineered Ti dental implant modifications, focusing on anodized nanostructures to fabricate the next generation of therapeutic and corrosion-resistant dental implants. The review explores the latest developments, clinical translation challenges, and future directions to assist in developing the next generation of dental implants that will survive long-term in the complex corrosive oral microenvironment.
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Farag, Ahmed A. "Applications of nanomaterials in corrosion protection coatings and inhibitors". Corrosion Reviews 38, n.º 1 (25 de febrero de 2020): 67–86. http://dx.doi.org/10.1515/corrrev-2019-0011.

Texto completo
Resumen
AbstractVarious methodologies are practically used to control corrosion. Coatings are the most widely used to protect metals against corrosion. However, due to the weak resistance of polymer coating against the penetration of corrosive solution to the metal/coating interface, the long-term corrosion resistance of the polymer coating is reduced gradually. Recently, nanoparticles have been added to coatings to improve their chemical, mechanical and optical properties. Nanocoatings either have constituents in the nanoscale or are made out of layers that are under 100 nm. Nanocoatings are used effectively to lessen the impact of a corrosive environment due to its various preferences, such as surface hardness, adhesive quality, long haul and, additionally, high-temperature corrosion opposition, and to improve its tribological properties, and so forth. Moreover, nanocoatings can be utilized in more slender and smoother thickness, which permits adaptability in equipment design and lower upkeep and working expenses. This review covers applications related to the management of metal corrosion, including the use of nanomaterials to produce high-performance corrosion inhibitors and corrosion-resistant coatings.
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Scully, John R. "Corrosion chemistry closing comments: opportunities in corrosion science facilitated by operando experimental characterization combined with multi-scale computational modelling". Faraday Discussions 180 (2015): 577–93. http://dx.doi.org/10.1039/c5fd00075k.

Texto completo
Resumen
Recent advances in characterization tools, computational capabilities, and theories have created opportunities for advancement in understanding of solid–fluid interfaces at the nanoscale in corroding metallic systems. The Faraday Discussion on Corrosion Chemistry in 2015 highlighted some of the current needs, gaps and opportunities in corrosion science. Themes were organized into several hierarchical categories that provide an organizational framework for corrosion. Opportunities to develop fundamental physical and chemical data which will enable further progress in thermodynamic and kinetic modelling of corrosion were discussed. These will enable new and better understanding of unit processes that govern corrosion at the nanoscale. Additional topics discussed included scales, films and oxides, fluid–surface and molecular–surface interactions, selected topics in corrosion science and engineering as well as corrosion control. Corrosion science and engineering topics included complex alloy dissolution, local corrosion, and modelling of specific corrosion processes that are made up of collections of temporally and spatially varying unit processes such as oxidation, ion transport, and competitive adsorption. Corrosion control and mitigation topics covered some new insights on coatings and inhibitors. Further advances inoperandoorin situexperimental characterization strategies at the nanoscale combined with computational modelling will enhance progress in the field, especially if coupling across length and time scales can be achieved incorporating the various phenomena encountered in corrosion. Readers are encouraged to not only to use thisad hocorganizational scheme to guide their immersion into the current opportunities in corrosion chemistry, but also to find value in the information presented in their own ways.
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Wang, Xingjun, Weipeng Sun, Wenge Li, Chenglin Zuo, Yong Jiang y Shuangxi Wang. "Development of Waterborne Heavy-Duty Anticorrosive Coatings with Modified Nanoscale Titania". Coatings 12, n.º 11 (31 de octubre de 2022): 1651. http://dx.doi.org/10.3390/coatings12111651.

Texto completo
Resumen
The steel structures of coastal engineering in the moist tropics and subtropics are always under a C5/CX level corrosion environment with high temperature, high humidity, and high salt fog. Anticorrosive waterborne coatings with high weatherability and reliability are urgently to be developed. In this work, one kind of waterborne heavy-duty anticorrosive coatings, with the advantages of excellent corrosion resistance, self-repairing ability, self-cleaning ability, and high film compactness, was successfully achieved through modifying the side chains on the surface morphologies of the spherical nanoscale titania. The micromorphology and structure of the coating were characterized by a scanning electron microscope (SEM), transmission electron microscope (TEM), and atomic force microscope (AFM). The anticorrosion characteristics and forming mechanism of the modified nanoscale titania coating were analyzed. The salt spray tests showed that the neutral salt spray resistance time of the modified nanoscale titania coating was 1440 h. Its durability reached the H level and met the design requirements for 15 years of anticorrosion lifetime. The modified nanoscale titania coatings had been large-scale commercially applied at some typical steel structures under an extreme harsh corrosion environment in one coastal thermal power plant. The results showed that no rusting, peeling, or crack phenomena were observed after 3 years of service under different harsh coastal corrosion conditions.
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Geng, Mingrui, Guangyu He, Zhiping Sun, Jiao Chen, Zhufang Yang y Yuqin Li. "Corrosion Damage Mechanism of TiN/ZrN Nanoscale Multilayer Anti-Erosion Coating". Coatings 8, n.º 11 (13 de noviembre de 2018): 400. http://dx.doi.org/10.3390/coatings8110400.

Texto completo
Resumen
TiN/ZrN multilayers can effectively improve the erosion resistance of metals, particularly titanium alloys employed in aero engines. To explore the corrosion damage mechanism of TiN/ZrN nanoscale multilayers (nanolaminate), a novel [TiN/ZrN]100 nanolaminate coating was deposited on Ti-6Al-4V alloys by multi-arc ion plating method. Salt spray corrosion tests and hot corrosion experiment were carried out to evaluate the corrosion resistance of the coating. The corrosion and damage mechanisms were explored with the help of detailed microstructure, phase composition and element distribution characterizations. The salt spray corrosion tests showed that the [TiN/ZrN]100 nanolaminate coating possessed good corrosion resistance, which protected substrate against the corrosion. The low temperature hot corrosion tests showed that the oxidation occurred on the surface of the coating, which improved the oxidation resistance of the sample. However, the oxidized droplets squeezed the coating, and destroyed the oxidized layers. As a result, the coating was peeled off from the substrate. The research highlights the corrosion resistance of the novel TiN/ZrN nanolaminate coating and offers a support for their application in engine compressor blade.
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Tesis sobre el tema "Nanoscale corrosion"

1

Scott, William Walter Jr. "Micro/Nanoscale Differential Wear and Corrosion of Multiphase Materials". The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu994420446.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Scott, William Walter. "Micro/nanoscale differential wear and corrosion of multiphase materials /". Connect to this title online, 2001. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu994420446.

Texto completo
Resumen
Thesis (Ph. D.)--Ohio State University, 2001.
Advisor: Bharat Bhushan, Dept. of Mechanical Engineering. Includes bibliographical references (leaves 145-152). Available online vai OhioLINK's ETD center.
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Annand, Kirsty June. "The nanoscale mechanisms of Zircaloy-4 corrosion in simulated nuclear reactor conditions". Thesis, University of Glasgow, 2018. http://theses.gla.ac.uk/8781/.

Texto completo
Resumen
Worldwide, zirconium alloys have long been utilised for fuel cladding elements and other structural components within several commercial designs of nuclear reactor owing to their high creep resistance, superior corrosion resistance in highly aggressive environments, and low cross section for neutron absorption. The purpose of this cladding material is to separate the uranium dioxide (UO2) fuel and the coolant water in order to prevent the escape of fission products, whilst also maintaining heat transfer to the coolant. Consequently, water corrosion of the fuel containments has become a key factor in the limitation of the lifetime of fuel rods within nuclear reactors, and maintaining containment integrity under corrosion is critical to ensuring safe operation and preventing accidental release of radionuclides into the cooling water. Therefore, developing an understanding of the mechanisms which govern the corrosion of zirconium-based alloys is vital, and is the motivation behind this study. The analysis of the corrosion of an unirradiated zirconium based alloy - Zircaloy-4 - is performed in a three-fold manner in this thesis. Firstly, an investigation of the metal:oxide interface is carried out, the results of which are set out in Chapter 4 of this thesis. Providing a clear understanding of the nanoscale structure and chemistry of this interface, alongside a thorough investigation of the morphology of any suboxide phases generated during the process of corrosion is fundamental to understanding the overall corrosion of this alloy. Secondly, systematic analysis of the corrosion and incorporation of SPPs into the oxide layer is performed in Chapter 5 of this thesis, in order to help inform the role of SPPs on the corrosion process for both autoclave, and more importantly, on irradiated oxides. In addition, spatially resolved chemical mapping, and correlation to the crystallographic structure provides an understanding not previously shown in the literature on the complex corrosion that takes place. Finally, Chapter 6 presents findings from studying oxygen content through the oxide scale, performed in order to quantitatively elucidate the details of the oxygen content from the outer porous oxide, through the stoichiometric ZrO2, and into any metastable suboxide layers present. This analysis highlights the significance of understanding such microstructural behaviour, in order to interpret the overall macro structural corrosion behaviour of zirconium alloys.
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Yang, Feipeng. "Nanoscale Characterization of Electrolyte Diffusion, Interface Morphology Disruption and Surface Dynamics of Polymer Melt Films Adsorbed on Graphene". University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1542133274117037.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

ELSAYED, AHMED MAHMOUD. "Low-pressure plasma treatments for cleaning metallic heritage artefacts". Doctoral thesis, Politecnico di Torino, 2019. http://hdl.handle.net/11583/2740997.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Huang, Chun-Lung y 黃俊龍. "Corrosion and oxidation behavior of Cu nanowires with high-density nanoscale twin boundaries". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/wq8qdv.

Texto completo
Resumen
博士
國立清華大學
材料科學工程學系
106
Copper (Cu) is an important conductive material used in microelectronic integrated-circuit devices due to its high electrical conductivity and low cost. However, Cu also suffers some intrinsic drawbacks such as oxidation and fast atomic diffusion, which would degrade device performance and even cause reliability problems. Cu metallization with highly dense nanoscale twin boundaries (nanotwinned Cu) have received wide attention because it possesses some excellent properties such as high tensile strength, good electromigration resistance and excellent thermal stability. However, few studies have addressed the chemical property of twin-modified Cu surface, especially for the nanotwinned Cu nanowires (nt-CuNWs). In this study, we investigate the chemical reactivity and structure stability of nt-CuNWs under moistured air ambient, water and acidic solution. The microstructural evolution and oxide formation behavior of nt-CuNWs were ex-situ monitored by transmission electron microscopy. By comparing the nt-CuNWs and nanocrystalline CuNWs (nc-CuNWs), it is found that the former exhibits a zig-zag faceted structure with very low atomic step density, while the latter have an atomically rough surface with high atomic step density. The nt-CuNWs appear to have reduced chemical reactivity and enhanced resistance to chemical corrosion. On the other hand, the nc-CuNWs were gradually oxidized by forming cuprous oxide (Cu2O) under water or moisture environment, which decomposed and transformed into Cu nanoparticles when exposed to visible light. According to the photoelectrochemical reaction of Cu/Cu2O system, we found that the nt-CuNWs demonstrate high chemical stability against the photolytic reaction. A kinetic mechanism based on the low chemical reactivity of twin-modified Cu surface and effective Cu/Cu2O interfacial vacancy sinking is proposed to explain why the nt-CuNWs are resistant against Kirkendall void formation.
Los estilos APA, Harvard, Vancouver, ISO, etc.

Libros sobre el tema "Nanoscale corrosion"

1

Corrosion Protection at the Nanoscale. Elsevier, 2020. http://dx.doi.org/10.1016/c2018-0-05391-8.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Corrosion Protection at the Nanoscale. Elsevier, 2020.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Li, Yongxin, Susai Rajendran, Tuán Anh Nguyen, Saeid Kakooei y Mahdi Yeganeh. Corrosion Protection at the Nanoscale. Elsevier, 2020.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Polychroniadis, Efstathios K., Ahmet Yavuz Oral y Mehmet Ozer. International Multidisciplinary Microscopy Congress: Proceedings of InterM, Antalya, Turkey, October 10–13, 2013. Springer, 2016.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Polychroniadis, Efstathios K., Ahmet Yavuz Oral y Mehmet Ozer. International Multidisciplinary Microscopy Congress: Proceedings of InterM, Antalya, Turkey, October 10-13 2013. Springer London, Limited, 2014.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

International Multidisciplinary Microscopy Congress: Proceedings of InterM, Antalya, Turkey, October 10-13 2013. Springer International Publishing AG, 2014.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.

Capítulos de libros sobre el tema "Nanoscale corrosion"

1

Maurice, Vincent y Philippe Marcus. "Corrosion at the Nanoscale". En Electrochemistry at the Nanoscale, 377–406. New York, NY: Springer New York, 2009. http://dx.doi.org/10.1007/978-0-387-73582-5_10.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Dillmann, Philippe. "Nanoscale Aspects of Corrosion on Cultural Heritage Metals". En Nanoscience and Cultural Heritage, 233–52. Paris: Atlantis Press, 2016. http://dx.doi.org/10.2991/978-94-6239-198-7_8.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Persaud, S. Y. "Studying Stress Corrosion Cracking Mechanisms Using Novel Nanoscale Characterization". En Proceedings of the 61st Conference of Metallurgists, COM 2022, 237–43. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-17425-4_33.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Yeganeh, Mahdi, Tuan Anh Nguyen, Susai Rajendran, Saeid Kakooei y Yongxin Li. "Corrosion protection at the nanoscale". En Corrosion Protection at the Nanoscale, 3–7. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00001-5.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Gavrilović-Wohlmuther, Aleksandra, Andreas Laskos y Erich Kny. "Corrosion inhibitor–loaded smart nanocontainers". En Corrosion Protection at the Nanoscale, 203–23. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00012-x.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Nguyen, Tuan Anh, Susai Rajendran, Saeid Kakooei, Mahdi Yeganeh y Yongxin Li. "Nanomaterials for cathodic protection of metals". En Corrosion Protection at the Nanoscale, 9–18. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00002-7.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Vignesh, R. Vaira, R. Padmanaban, M. Govindaraju y G. Suganya Priyadharshini. "Corrosion protection of magnesium alloys in simulated body fluids using nanophase Al2O3". En Corrosion Protection at the Nanoscale, 21–45. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00003-9.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Ratna Kumar, P. S. Samuel, S. Jyothi y S. John Alexis. "Corrosion behavior of aluminum alloy reinforced with MWCNTs". En Corrosion Protection at the Nanoscale, 47–61. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00004-0.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Hussain, M. Irfan, Somia Nawaz, Muhammad Munir Sajid, Ahmed Nawaz, Ayesha Irum, Yasir Javed, Changchun Ge y Ghulam Yasin. "Corrosion resistance of nanostructured metals and alloys". En Corrosion Protection at the Nanoscale, 63–87. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00005-2.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Raja, Pandian Bothi, Mohammad Ali Assad y Mohammad Ismail. "Inhibitor-encapsulated smart nanocontainers for the controlled release of corrosion inhibitors". En Corrosion Protection at the Nanoscale, 91–105. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00006-4.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.

Actas de conferencias sobre el tema "Nanoscale corrosion"

1

Aqueeb, Ahsan, Venkataramana Gadhamshetty y Sayan Roy. "An Electromagnetically Transparent and Microbial Corrosion Resistant Nanoscale Protective Coating". En 2021 IEEE Research and Applications of Photonics in Defense Conference (RAPID). IEEE, 2021. http://dx.doi.org/10.1109/rapid51799.2021.9521385.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Cai, Qianqian, Jinkai Xu, Zhongxu Lian, Zhanjiang Yu, Huadong Yu y Jian Li. "Superhydrophobic magnesium alloy surface with corrosion resistance". En 2021 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2021. http://dx.doi.org/10.1109/3m-nano49087.2021.9599746.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Casaletto, Maria Pia, Antonella Privitera y Viviana Figa. "Nanoscale Investigations of the Corrosion of Metallic Artworks by X-Ray Photoemission Spectroscopy". En 2018 IEEE 4th International Forum on Research and Technology for Society and Industry (RTSI). IEEE, 2018. http://dx.doi.org/10.1109/rtsi.2018.8548415.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Davies, J. L., J. Williams, J. R. Searle, J. V. Langkruis, E. Zoestbergen y V. John. "Alteration of the Optical Properties of PVD Coatings by Corrosion Induced Nanoscale Roughness". En Society of Vacuum Coaters Annual Technical Conference. Society of Vacuum Coaters, 2013. http://dx.doi.org/10.14332/svc13.proc.1104.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Yang, Chengjuan, Xue Yang, Zhen Yang y Dawei Zhang. "Corrosion Resistant of Superhydrophobic Aluminum Surfaces Fabricated by Nanosecond Lasers". En 2022 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2022. http://dx.doi.org/10.1109/3m-nano56083.2022.9941642.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Li, Jian, Yiquan Li, Jinkai Xu, Zhanjiang Yu, Huadong Yu y Qianqian Cai. "Superhydrophobic aluminum alloy surface with self-cleaning and anti-corrosion properties". En 2021 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2021. http://dx.doi.org/10.1109/3m-nano49087.2021.9599737.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Wang, Jiaqi, Jinkai Xu, Zhongxu Lian y Huadong Yu. "Study on Corrosion Behavior of Titanium Alloy by Waterjet-assisted Laser Ablation". En 2022 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2022. http://dx.doi.org/10.1109/3m-nano56083.2022.9941353.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Flannery, Matthew, Angie Fan y Tapan G. Desai. "Nanoscale coatings for erosion and corrosion protection of copper microchannel coolers for high powered laser diodes". En SPIE LASE, editado por Mark S. Zediker. SPIE, 2014. http://dx.doi.org/10.1117/12.2037770.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Van Velson, Nathan y Matt Flannery. "Performance life testing of a nanoscale coating for erosion and corrosion protection in copper microchannel coolers". En 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). IEEE, 2016. http://dx.doi.org/10.1109/itherm.2016.7517612.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Ren, Zhencheng, Xiaoning Hou, Yalin Dong y Chang Ye. "Effect of Nanocrystallization-Assisted Nitriding on the Corrosion Behavior of AISI 4140 Steel". En ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8705.

Texto completo
Resumen
In this study, an innovative process called nanocrystallization-assisted nitriding was used to process 4140 steels. First, a nanocrystalline surface layer was induced in 4140 steel by ultrasonic nanocrystal surface modification (UNSM). The abundant nanoscale grain boundaries provide micro-channels for efficient nitrogen diffusion during nitriding at relatively low temperature (450 °C) and short duration (4 hours). The samples were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The hardness and corrosion resistance were examined and compared for samples after different processing conditions. It has been demonstrated that the sample processed by nanocrystallization-assisted nitriding has much higher hardness and corrosion resistance compared with the samples processed by nitriding only.
Los estilos APA, Harvard, Vancouver, ISO, etc.

Informes sobre el tema "Nanoscale corrosion"

1

SUGAMA, T. NANOSCALE BOEHMITE FILLER FOR CORROSION AND WEAR RESISTANT POLYPHENYLENESULFIDE COATINGS. Office of Scientific and Technical Information (OSTI), junio de 2003. http://dx.doi.org/10.2172/812306.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
También puede estar interesado en las bibliografías ampliadas sobre el tema "Nanoscale corrosion" para tipos de fuentes particulares:
Artículos de revistas
Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!

Pasar a la bibliografía