Libros sobre el tema "Monolithic finite element formulation"

Carrera, Erasmo. Finite element analysis of structures through unified formulation. Chichester, West Sussex: John Wiley & Sons, Inc., 2014.

Carrera, Erasmo, Maria Cinefra, Enrico Zappino y Marco Petrolo. Finite Element Analysis of Structures Through Unified Formulation. Chichester, UK: John Wiley & Sons, Ltd, 2014. http://dx.doi.org/10.1002/9781118536643.

Szabo, B. A. Introduction to finite element analysis: Formulation, verification, and validation. Hoboken, N.J: Wiley, 2011.

Pramote, Dechaumphai, Wieting A. R y Langley Research Center, eds. Thermal-structural finite element analysis using linear flux formulation. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Pramote, Dechaumphai, Wieting A. R y Langley Research Center, eds. Thermal-structural finite element analysis using linear flux formulation. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Collins, J. D. A combined finite element-boundary element formulation for solution of axially symmetric bodies. Ann Arbor, Mich: University of Michigan, Radiation Laboratory, Dept. of Electrical Engineering and Computer Science, 1991.

United States. National Aeronautics and Space Administration., ed. A variational justification of the assumed natural strain formulation of finite elements. [Washington, DC]: National Aeronautics and Space Administration, 1991.

Waldman, W. A penalty element formulation for calculating bulk stress. Melbourne, Australia: Aeronautical Research Laboratory, 1989.

Golla, David Frank. Dynamics of viscoelastic structures: a time-domain finite element formulation. [Downsview, Ont.]: [Institute for Aerospace Studies], 1985.

Golla, David Frank. Dynamics of viscoelastic structures: A time-domain finite element formulation. [Downsview, Ont.]: Institute for Aerospace Studies, 1986.

Golla, D. F. Dynamics of viscoelastic structures - a time-domain, finite element formulation. [S.l.]: [s.n.], 1985.

S, Chin y Al-Bermani F. G. A, eds. Formex formulation for finite element analysis of thin-walled structures. St. Lucia: University of Queensland, Dept. of Civil Engineering, 1995.

Stefano, Del Giudice y Nonino Carlo, eds. Finite element analysis in heat transfer: Basic formulation and linear problems. Washington, D.C: Taylor & Francis, 1994.

A, Saravanos D. y NASA Glenn Research Center, eds. A mixed multi-field finite element formulation for thermopiezoelectric composite shells. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

A, Saravanos D. y NASA Glenn Research Center, eds. A mixed multi-field finite element formulation for thermopiezoelectric composite shells. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

1956-, Volakis John Leonidas y United States. National Aeronautics and Space Administration., eds. A combined finite element and boundary integral formulation for solution via CGFFT of 2-dimensional scattering problems. [Washington, DC]: National Aeronautics and Space Administration, 1989.

Jin, Jian-Ming. A finite element-boundary integral formulation for scattering by three-dimensional cavity-backed apertures. Ann Arbor, Mich: University of Michigan, College of Engineering, Department of Electrical Engineering & Computer Science, Radiation Laboratory, 1990.

Donea, J. An explicit "ALE" finite element formulation for 3D transient dynamic fluid-structure interaction problems. Luxembourg: Commission of the European Communities, 1988.

Urbański, Aleksander. The unified finite element formulation of homogenization of structural members with a periodic microstructure. Kraków: Wydawn. PK., 2005.

Jin, Jian-Ming. A finite element-boundary integral formulation for scattering by three-dimensional cavity-backed apertures. Ann Arbor, Mich: University of Michigan, College of Engineering, Department of Electrical Engineering & Computer Science, Radiation Laboratory, 1990.

Caneill, J. Y. A finite-element formulation of a variational procedure of wind-field adjustment over complex terrain. Luxembourg: Commission of the European Communities, 1985.

A, Crivelli Luis, B. J. Captain y United States. National Aeronautics and Space Administration., eds. A survey of the core-congruential formulation for geometrically nonlinear TL finite elements. Boulder, Colo: Center for Space Structures and Controls, College of Engineering, University of Colorado, 1994.

A, Crivelli Luis, B. J. Captain y United States. National Aeronautics and Space Administration., eds. A survey of the core-congruential formulation for geometrically nonlinear TL finite elements. Boulder, Colo: Center for Space Structures and Controls, College of Engineering, University of Colorado, 1994.

Center, Langley Research y United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Direct formulation of a 4-node hybrid shell element with rotational degrees of freedom. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Bourdel, Francoise. Formulation variationnelle entropique des systemes hyperboliques conservatifs - Application a la resolution des equations d'Euler. Toulouse: Centre d'etudes et de recherches de Toulouse, Departement d'etudes et de recherches en informatique, 1985.

A, Felippa Carlos y United States. National Aeronautics and Space Administration., eds. A three-dimensional nonlinear timoshenko beam based on the corecongruential formulation. [Washington, DC: National Aeronautics and Space Administration, 1992.

A, Felippa Carlos y United States. National Aeronautics and Space Administration., eds. A three-dimensional nonlinear timoshenko beam based on the corecongruential formulation. [Washington, DC: National Aeronautics and Space Administration, 1992.

A, Felippa Carlos y United States. National Aeronautics and Space Administration., eds. A three-dimensional nonlinear timoshenko beam based on the corecongruential formulation. [Washington, DC: National Aeronautics and Space Administration, 1992.

Shim, Jay Jayne. A Multiphasic-Fluid-Structure Interaction Formulation Based on Mixture Theory and Its Finite Element Implementation in FEBio. [New York, N.Y.?]: [publisher not identified], 2021.

Witkowski, Wojciech. Synteza sformułowania nieliniowej mechaniki powłok podlegających skończonym obrotom w ujęciu mes: Synthesis of formulation of nonlinear mechanics of shells undergoing finite rotations in the context of FEM. Gdańsk: Politechnika Gdańska, 2011.

E, Tezduyar T. y Lyndon B. Johnson Space Center, eds. Finite element techniques for the Navier-Stokes equations in the primitive variable formulation and the vorticity stream-function formulation: Interim report for the work performed under NASA-Johnson Space Center. Houston, TX: Dept. of Mechanical Engineering, University of Houston, 1987.

Madenci, Erdogan. Implementation of free-formulation-based flat shell elements into NASA comet code and development of nonlinear shallow shell element: Grant NAG1-1626. [Hampton, Va.]: NASA Langley Research Center, 1997.

Center, Langley Research y United States. National Aeronautics and Space Administration., eds. Implementation of free-formulation-based flat shell elements into NASA comet code and development of nonlinear shallow shell element: Grant NAG1-1626. [Hampton, Va.]: NASA Langley Research Center, 1997.

Center, Langley Research y United States. National Aeronautics and Space Administration., eds. Implementation of free-formulation-based flat shell elements into NASA comet code and development of nonlinear shallow shell element: Grant NAG1-1626. [Hampton, Va.]: NASA Langley Research Center, 1997.

Graglia, Roberto D., Giuseppe Pelosi y Stefano Selleri, eds. International Workshop on Finite Elements for Microwave Engineering. Florence: Firenze University Press, 2016. http://dx.doi.org/10.36253/978-88-6655-968-9.

Carrera, Erasmo, Maria Cinefra, Marco Petrolo y Enrico Zappino. Finite Element Analysis of Structures Through Unified Formulation. Wiley & Sons, Incorporated, John, 2014.

Au, Richard W. S. Penalty formulation for finite element analysis of plates. 1985.

Carrera, Erasmo. Finite Element Analysis of Structures by Unified Formulation. Wiley & Sons, Limited, John, 2014.

Carrera, Erasmo, Maria Cinefra, Marco Petrolo y Enrico Zappino. Finite Element Analysis of Structures Through Unified Formulation. Wiley & Sons, Incorporated, John, 2014.

Zienkiewicz, O. C. y R. L. Taylor. The Finite Element Method: Basic Formulation and Linear Problems. 4^a ed. Mcgraw-Hill College, 1987.

Szab�, Barna y Ivo Babu�ka. Introduction to Finite Element Analysis: Formulation, Verification and Validation. Wiley & Sons, Limited, John, 2011.

Thermal-structural finite element analysis using linear flux formulation. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

The Finite Element Method: Basic Formulation and Linear Problems. Mcgraw-Hill College, 1987.

Spatially curved and twisted rods: A finite element formulation. Ottawa: National Library of Canada, 1990.

Szab�, Barna y Ivo Babu�ka. Introduction to Finite Element Analysis: Formulation, Verification and Validation. Wiley & Sons, Incorporated, John, 2011.

Babuska, Ivo y Barna Szabó. Introduction to Finite Element Analysis: Formulation, Verification and Validation. Wiley & Sons, Incorporated, John, 2011.

Szab�, Barna y Ivo Babu�ka. Introduction to Finite Element Analysis: Formulation, Verification and Validation. Wiley & Sons, Incorporated, John, 2011.

Iannelli, Joseph. Finite Element Computational Gas Dynamics: Multi-Dimensional Upstream Biased Formulation. Elsevier, 2023.

Golla, David Frank. Dynamics of viscollastic structures: a time-domain finite element formulation. 1986.

Norouzi, Hamid Reza, Reza Zarghami, Rahmat Sotudeh-Gharebagh y Navid Mostoufi. Coupled CFD-DEM Modeling: Formulation, Implementation and Application to Multiphase Flows. Wiley & Sons, Incorporated, John, 2016.