Tesis sobre el tema "Milling machinery"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte los 50 mejores tesis para su investigación sobre el tema "Milling machinery".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Explore tesis sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.
Herman, Paul Andrew. "Improvement of surface finish quality in peripheral milling VIA precision compensation for cutter runout". Thesis, Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/16696.
Texto completoLazoğlu, İsmail. "Analysis and optimization of milling force system for workpiece with complicated geometry". Thesis, Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/16032.
Texto completoHekman, Keith Alan. "On-line identification of cutter runout in end milling processes". Diss., Georgia Institute of Technology, 1994. http://hdl.handle.net/1853/16748.
Texto completoFan, Sai Kit. "An study of unit machine operations for tool paths in high speed milling /". View abstract or full-text, 2008. http://library.ust.hk/cgi/db/thesis.pl?IELM%202008%20FAN.
Texto completoGaliotto, A. y Adriano Peruzzi. "Cold Milling - 39: innovative temperature/humidity control on milling operation". Verein für Gerberei-Chemie und -Technik e. V, 2019. https://slub.qucosa.de/id/qucosa%3A34142.
Texto completoCarpenter, Ian David. "Machinability assessment and tool selection for milling". Thesis, Online version, 1996. http://ethos.bl.uk/OrderDetails.do?did=1&uin=uk.bl.ethos.286659.
Texto completoLiles, Howard J. "High throughput profile millling for the flexible and accelerated processing of electric steels". Thesis, Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/47628.
Texto completoThompson, Michael B. "Development of a five-axis machining algorithm in flat end mill roughing /". Diss., CLICK HERE for online access, 2005. http://contentdm.lib.byu.edu/ETD/image/etd823.pdf.
Texto completoFowler, Gary. "Abrasive water-jet : controlled depth milling of titanium alloys". Thesis, University of Nottingham, 2003. http://eprints.nottingham.ac.uk/11436/.
Texto completoEl-Hofy, Mohamed Hassan. "Milling/routing of carbon fibre reinforced plastic (CFRP) composites". Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5529/.
Texto completoFussell, Barry K. "Modeling and adaptive force control of end milling operations /". The Ohio State University, 1987. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487327695620678.
Texto completoAlharbi, W. N. H. "Development of a closed loop control system for vibratory milling". Thesis, Liverpool John Moores University, 2018. http://researchonline.ljmu.ac.uk/8456/.
Texto completoSharif, Safian. "Face milling of titanium coated alloys using coated and uncoated carbide tools". Thesis, Coventry University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299091.
Texto completoBrowne, D. G. "Development of a bench test to evaluate wear resistant materials and coal grindability for pulverizers". Thesis, Queensland University of Technology, 1987. https://eprints.qut.edu.au/36468/1/36468_Browne_1987.pdf.
Texto completoNiu, Caotan. "A study of tool life and machinability parameters in high speed milling of hardened die steels". Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/HKUTO/record/B39557170.
Texto completoSkorupa, Jan J. "Wear of tube mill liners for South African power industry". Thesis, University of Cape Town, 1989. http://hdl.handle.net/11427/23382.
Texto completoMa, Lei. "PVDF sensor based wireless monitoring of milling process". Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/47714.
Texto completoPatel, Bhavin Ramesh. "State space formulation of TFEA & uncharted islands of instability in milling". Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/4898.
Texto completoThe entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on January 7, 2008) Includes bibliographical references.
Niu, Caotan y 牛草坛. "A study of tool life and machinability parameters in high speed milling of hardened die steels". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B39557170.
Texto completoLohse, Benjamin H. "The controlled ball milling of titanium and carbon to form TiC /". Access electronically, 2005. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20060221.110552/index.html.
Texto completoPisipati, Deepak. "Virtual manufacturing of pockets using end milling with multiple tool paths". Ohio : Ohio University, 2004. http://www.ohiolink.edu/etd/view.cgi?ohiou1177011829.
Texto completoZemčík, Tomáš. "Simulace průběhu řezné síly při obvodovém frézování válcovou frézou s přímými zuby". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229250.
Texto completoMachalová, Veronika. "Řezné síly při frézování vláknově vyztužených kompozitů". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227947.
Texto completoZlámal, Pavel. "Projekt lehké obrobny v TOS Kuřim - OS, a.s. - frézařské pracoviště". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227971.
Texto completoDhamija, Dinesh. "Macintosh - Bridgeport communications CAD/CAM". Ohio : Ohio University, 1988. http://www.ohiolink.edu/etd/view.cgi?ohiou1182784285.
Texto completoRenuka, Shivaswaroop R. "Development of models of CNC machines - EMCO VMC100 and EMCO TURN120P in virtual NC". Ohio : Ohio University, 1996. http://www.ohiolink.edu/etd/view.cgi?ohiou1178046654.
Texto completoГерасим’юк, Валерій Михайлович y Valerii Herasymiuk. "Обґрунтування конструкції елементів приводу головного руху вертикально-фрезерного верстату". Master's thesis, ТНТУ ім. І. Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29680.
Texto completoУ дипломній роботі проведено аналіз конструктивних особливостей базової моделі верстату, а також верстатів-аналогів. Здійснено аналіз загальних структур приводів головного руху вертикально-фрезерних верстатів. Проведено обґрунтування компонувальної схеми та технологічних параметрів для модернізації верстата. Здійснено розробку структури модернізованого приводу на основі морфологічної матриці. На основі проведено аналізу вибрано оптимальну компонувальну схему шпиндельного вузла та проведено дослідження впливу кількості підшипників в передній опорі на жорсткість шпиндельного вузла. Проведено кінематичний і силовий розрахунок ступеневої та безступеневої частин приводу, на основі яких розроблено конструкції коробки швидкостей, шпиндельного вузла, а також системи переключення між ступеневою і безступеневою частинами приводу головного руху вертикально-фрезерного верстату. Проведено розрахунок вартості модернізації приводу головного руху верстата. Розроблені технічні рішення обґрунтовано на основі вимог охорони праці, безпеки життєдіяльності та охорони навколишнього середовища.
Analysis of the structural features of the machine-tool basic model, as well as similar machine-tool, has been carried out in the diploma paper. Analysis of the general structures of the vertical-milling machine main feed drive was performed. The component scheme and technological parameters for the updating of the machine were interpreted. The structure of the improved drive basing on the morphological matrix was developed. The optimal compiling scheme of the spindle unit was chosen basing on it and investigation of the effect of the bearings number in the initial support on the spindle unit rigidity was performed. Kinematic and strength calculations of the speed drive and variable-speed drive part were done, basing on which the design of the gear-box, spindle unit and the system of gearing between speed drive and variable-speed drive of the main feed drive of the vertical-milling machine have been carried out. The calculation of the expenditures for the updating of the main feed of the machine-tool was done. The developed engineering solutions were interpreted to meet the requirements of the health and safety program and the program of the environment protection.
Вступ, Аналітичний розділ, Аналіз формоутворення, Обґрунтування компонувальної схеми верстату, Технологічний розділ, Науково-дослідний розділ, Конструкторський розділ, Спеціальний розділ, Охорона праці та БЖД, Екологія, Обґрунтування економічної ефективності, Висновки, перелік посилань
Tsui, Kin-shing. "Tool path generation for protrusion milling". Click to view the E-thesis via HKUTO, 2006. http://sunzi.lib.hku.hk/hkuto/record/B36891332.
Texto completoShorr, Michael Jared. "Dynamic stability analysis for multi-flute end milling". Diss., Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/17789.
Texto completoPerry, Stephen Alan. "Precision compensation for cutter runout in peripheral milling". Thesis, Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/18200.
Texto completoBondar, I. V. "Five-axis machining on CNC milling machines". Thesis, Sumy State University, 2017. http://essuir.sumdu.edu.ua/handle/123456789/65171.
Texto completoYuan, Weifeng. "Greedy tool heuristic for rough milling of complex pockets /". View Abstract or Full-Text, 2002. http://library.ust.hk/cgi/db/thesis.pl?IEEM%202002%20YUAN.
Texto completoIncludes bibliographical references (leaves 48-52). Also available in electronic version. Access restricted to campus users.
Tsui, Kin-shing y 徐健成. "Tool path generation for protrusion milling". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B36891332.
Texto completoPowell, Malcolm S. "The effect of liner design upon charge motion in a rotary mill". Master's thesis, University of Cape Town, 1988. http://hdl.handle.net/11427/21925.
Texto completoKirk, Dean Frederick. "Development of a Small Envelope Precision Milling Machine". Thesis, University of Canterbury. Mechanical Engineering, 2006. http://hdl.handle.net/10092/2773.
Texto completoRathbun, Geoffrey P. "A Stewart Platform six-axis milling machine development". Thesis, University of Canterbury. Engineering, 1986. http://hdl.handle.net/10092/6421.
Texto completoSahari, M. "The microcomputer and the engraving/profile milling machine". Thesis, University of Bristol, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.356231.
Texto completoGrebchenko, A. "Mechanization and automation gear milling". Thesis, Сумський державний університет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/33627.
Texto completoKöksal, Sakip. "Face milling of nickel-based superalloys with coated and uncoated carbide tools". Thesis, Coventry University, 2000. http://curve.coventry.ac.uk/open/items/86a6b065-704a-475b-b805-9d3397487ddf/1.
Texto completoPafkovič, Roman. "Analýza rizik provozované CNC frézky MCV 754Q". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399342.
Texto completoAbrari, Farid. "Multi-axis milling of flexible parts /". *McMaster only, 1998.
Buscar texto completoFortgang, Joel D. "Combined Mechanical and Command Design for Micro-Milling Machines". Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/10430.
Texto completoStevens, Anthony J. "An adaptive mimo application of the repetitive controller for runout force rejection in peripheral milling". Thesis, Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/17669.
Texto completoEbrahimi, S. Morteza K. "Dynamic modelling and simulation of a CNC milling machine". Thesis, Cardiff University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287909.
Texto completoSon, Seung-Kil 1964. "A hybrid type small 5-axis CNC milling machine". Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/29275.
Texto completoIncludes bibliographical references (leaves 116-119).
5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these machines have serial mechanisms so that low static and dynamic stiffness become very critical design issues especially for high speed machining. Parallel mechanisms have recently received attention from machine tool designers because of their inherent potential for stiffness and because of their compactness. However, much of the promised advantages of parallel machines only occur within a very small region of their workspace with the expense of the large machine-tool foot print. We discuss some of the kinematic and structural challenges to extracting machining performance from serial and parallel machines. We compare a hybrid machine, which combines serial and parallel mechanisms, with typical serial and parallel machines such as Euler angle machines and the Hexapod. In particular, we consider singularities, reversal characteristics, and manufacturability. We show that hybrid machines can benefit from the advantages of serial and parallel mechanisms while avoiding most potential pitfalls of both mechanisms. However, hybrid structures can suffer from the manufacturing problem of over-constraint. We show that the degree of over-constraint depends on the size of the parallel machine. We have designed and fabricated a small hybrid 5-axis motion platform, the MIT-SS-1, which can tolerate this over-constraint through a novel layout of axes. Numerical and experimental test results of the MIT-SS-1 are presented and compared. Finally we show that this structure has potential as a small 5-axis CNC milling machine.
by Seung-Kil Son.
Ph.D.
Golaski, Edmund Walter 1976. "Direct haptic control of a 3-axis milling machine". Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/88887.
Texto completoКоротун, Микола Миколайович, Николай Николаевич Коротун, Mykola Mykolaiovych Korotun, Г. Ананченко y H. Ananchenko. "The construction and functions of the universal milling machine". Thesis, Вид-во СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/5552.
Texto completoČunek, Jakub. "Konstrukce jednoúčelového frézovacího stroje". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230489.
Texto completoOzgen, Arda. "Cutting Strategies For Forging Die Manufacturing On Cnc Milling Machines". Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609433/index.pdf.
Texto completocutting speed, step over and feed are the main cutting parameters and these parameters affect geometrical accuracy and surface quality of the forging die cavities. In this study, effects of the cutting parameters on geometrical error have been examined on a representative die cavity profile. To remove undesired volume in the die cavities, available cutting strategies are investigated. Feed rate optimization is performed to maintain the constant metal removal rate along the trajectory of the milling cutter during rough cutting process. In the finish cutting process of the die cavities, Design of Experiment Method has been employed to find out the effects of the cutting parameters on the geometrical accuracy of the manufactured cavity profile. Prediction formula is derived to estimate the geometrical error value in terms of the values of the cutting parameters. Validity of the prediction formula has been tested by conducting verification experiments for the representative die geometry and die cavity geometry of a forging part used in industry. Good agreement between the predicted error values and the measured error values has been observed.
Radhakrishnan, Anupam. "Experimental and numerical investigation of subcritical bifurcations in milling". Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/5095.
Texto completoThe entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on January 8, 2008) Includes bibliographical references.