Libros sobre el tema "Micromechanic model"

Altus, Eli. Fatigue of hybrid composites by a cohesive micromechanic model. Haifa, Isreal: Faculty of Mechanical Engineering, Technion - Israel Institute of Technology, 1991.

P, Wriggers, ed. Introduction to computational micromechanics. Berlin: Springer, 2005.

Gu, Xiaohong. Micromechanics of model carbon-fibre/epoxy-resin composites. Manchester: UMIST, 1995.

Zohdi, Tarek I. An introduction to computational micromechanics. Berlin: Springer, 2008.

V, Sankar Bhavani y Langley Research Center, eds. Micromechanical models for textile structural composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

Kang, Hsü y United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Micromechanical model of crack growth in fiber reinforced ceramics. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1990.

M, Arnold Steven y United States. National Aeronautics and Space Administration., eds. Micromechanics analysis code (MAC): User guide. [Washington, DC]: National Aeronautics and Space Administration, 1994.

Z, Voyiadjis G., Ju J. W y U.S. National Congress of Applied Mechanics (12th : 1994 : University of Washington, Seattle), eds. Inelasticity and micromechanics of metal matrix composites. Amsterdam: Elsevier, 1994.

-B, Mühlhaus H., ed. Continuum models for materials with microstructure. Chichester, England: Wiley, 1995.

United States. National Aeronautics and Space Administration., ed. COMGEN-BEM: Boundary element model generation for composite materials micromechanical analysis. Washington, DC: National Aeronautics and Space Administration, 1992.

United States. National Aeronautics and Space Administration., ed. COMGEN-BEM: Boundary element model generation for composite materials micromechanical analysis. Washington, DC: National Aeronautics and Space Administration, 1992.

F, Shih C., Anderson T. L. 1957-, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering., University of Illinois at Urbana-Champaign. Dept. of Civil Engineering., Brown University. Division of Engineering., Texas A & M University. Dept. of Mechanical Engineering. y Naval Surface Warfare Center (U.S.). Annapolis Detachment., eds. Continuum and micromechanics treatment of constraint in fracture. Washington, DC: Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1993.

J, Birt Michael y Langley Research Center, eds. Evaluation of several micromechanics models for discontinuously reinforced metal matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Jong-Won, Lee y Langley Research Center, eds. A micromechanics model of the stiffness and strength of laminates with fiber waviness. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1988.

Brzesowsky, Rolf. Micromechanics of sand grain failure and sand compaction. [Utrecht: Faculteit Aardwetenschappen, Universiteit Utrecht, 1996.

D, Comiskey Michele, Bednarcyk Brett A y NASA Glenn Research Center, eds. Micromechanics Analysis Code post-processing (MACPOST) user guide. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

A, Bednarcyk Brett y United States. National Aeronautics and Space Administration., eds. An efficient implementation of the GMC micromechanics model for multi-phased materials with complex microstructures. [Washington, DC: National Aeronautics and Space Administration, 1997.

A, Bednarcyk Brett y United States. National Aeronautics and Space Administration., eds. An efficient implementation of the GMC micromechanics model for multi-phased materials with complex microstructures. [Washington, DC: National Aeronautics and Space Administration, 1997.

United States. National Aeronautics and Space Administration., ed. On the finite element implementation of the generalized method of cells micromechanics constitutive model. [Washington, DC]: National Aeronautics and Space Administration, 1995.

Wiesner, C. S. A review of micromechanical failure models for cleavage and ductile fracture. Cambridge: TWI, 1997.

Lee, D. H. A review of current micromechanical models of the unit fibrous cell. Christchurch: WRONZ, 1990.

1951-, Pindera M. J. y United States. National Aeronautics and Space Administration., eds. Micromechanics of metal matrix composites using the generalized method of cells model (GMC) user's guide. [Washington, DC: National Aeronautics and Space Administration, 1992.

1951-, Pindera M. J. y United States. National Aeronautics and Space Administration., eds. Micromechanics of metal matrix composites using the generalized method of cells model (GMC) user's guide. [Washington, DC: National Aeronautics and Space Administration, 1992.

1951-, Pindera M. J. y United States. National Aeronautics and Space Administration., eds. Micromechanical modeling of woven metal matrix composites: [final contractor report]. [Washington, DC: National Aeronautics and Space Administration, 1997.

1951-, Pindera M. J. y United States. National Aeronautics and Space Administration., eds. Micromechanical modeling of woven metal matrix composites: [final contractor report]. [Washington, DC: National Aeronautics and Space Administration, 1997.

1951-, Pindera M. J. y United States. National Aeronautics and Space Administration., eds. Micromechanical modeling of woven metal matrix composites: [final contractor report]. [Washington, DC: National Aeronautics and Space Administration, 1997.

Micromechanical analysis and multi-scale modeling using the Voronoi cell finite element method. Boca Raton, FL: CRC Press, 2011.

M, Zbib Hussein, Demir Ismail 1960-, Zhu Hong-tao, American Society of Mechanical Engineers. Applied Mechanics Division., American Society of Mechanical Engineers. Materials Division. y Joint ASME Applied Mechanics and Materials Summer Meeting (1995 : Los Angeles, Calif.), eds. Micromechanics and constitutive modelling of composite materials: Presented at the 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, Los Angeles, California, June 28-30, 1995. New York: American Society of Mechanical Engineers, 1995.

Silvestre, Nuno. Advanced computational nanomechanics. Chichester, West Sussex, United Kingdom: John Wiley & Sons Inc., 2016.

C, Pauly Christopher, Pindera M. J. 1951- y United States. National Aeronautics and Space Administration., eds. Experimental characterization and micromechanical modeling of woven carbon/copper composites. [Washington, D.C.]: National Aeronautics and Space Administration, 1997.

M, Arnold Steven y United States. National Aeronautics and Space Administration., eds. Critique of macro flow/damage surface representations for metal matrix composites using micromechanics. [Washington, D.C: National Aeronautics and Space Administration, 1996.

L, Bradley Walter, Texas A & M University. Mechanics and Materials Center. y United States. National Aeronautics and Space Administration., eds. Micromechanics of compression failures in open hole composite laminates: A report. College Station, Tex: Mechanics and Materials Center, Texas A&M University, 1987.

1933-, Dvorak George J., Lagoudas Dimitris C, American Society of Mechanical Engineers. Winter Meeting, American Society of Mechanical Engineers. Applied Mechanics Division. y American Society of Mechanical Engineers. Materials Division., eds. Microcracking-induced damage in composites: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, Texas, November 25-30, 1990. New York, N.Y: The Society, 1990.

Dormieux, Luc. Microporomechanics. New York: John Wiley & Sons, Ltd., 2006.

M, Mehrabadi M., American Society of Mechanical Engineers. Materials Division. y American Society of Mechanical Engineers. Winter Meeting, eds. Mechanics of granular materials and powder systems: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York: ASME, 1992.

Microporomechanics. Chichester, UK: John Wiley & Sons, 2007.

A, Meguid S., American Society of Mechanical Engineers. Applied Mechanics Division., American Society of Mechanical Engineers. Materials Division. y Joint ASME Applied Mechanics and Materials Summer Meeting (1995 : Los Angeles, Calif.), eds. Micromechanical modelling and damage characterization of advanced materials: Presented at the 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, Los Angeles, California, June 28-30, 1995. New York, N.Y: American Society of Mechanical Engineers, 1995.

1955-, Benson D. J., Asaro Robert J, American Society of Mechanical Engineers. Winter Meeting, American Society of Mechanical Engineers. Applied Mechanics Division. y American Society of Mechanical Engineers. Pressure Vessels and Piping Division., eds. Advanced computational methods for material modeling: Presented at the 1993 ASME Winter Annual Meeting, New Orleans, Louisiana, November 28-December 3, 1993. New York: American Society of Mechanical Engineers, 1993.

Center, NASA Glenn Research, ed. Strain rate dependent deformation and strength modeling of a polymer matrix composite utilizing a micromechanics approach. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

Heinz, Konietzky, ed. Numerical modeling in micromechanics via particle methods: Proceedings of the 1st International PFC Symposium, Gelsenkirchen, Germany, 6-8 November 2002. Lisse: Balkema, 2003.

Computational mesomechanics of composites: Numerical analysis of the effect of microstructures of composites on their strength and damage resistance. Chichester, West Sussex, England: John Wiley, 2007.

Mishnaevsky, Leon L. Jr. Computational Mesomechanics of Composites. New York: John Wiley & Sons, Ltd., 2007.

IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity (1997 Bochum, Germany). IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity: Proceedings of the IUTAM symposium held in Bochum, Germany, 25-29 August 1997. New York: Kluwer Academic Publishers, 2002.

D, Roberts Gary, Gilat Amos y NASA Glenn Research Center, eds. Implementation of an associative flow rule including hydrostatic stress effects into the high strain rate deformation analysis of polymer matrix composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2003.

IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity (1997 Bochum, Germany). IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity: Proceedings of the IUTAM symposium held in Bochum, Germany, 25-29 August 1997. Dordrecht: Kluwer Academic Publishers, 1999.

1948-, Varadan V. V., Society of Photo-optical Instrumentation Engineers., Society for Experimental Mechanics (U.S.), Air Force Research Laboratory (Wright-Patterson Air Force Base, Ohio), Nihon Seramikkusu Kyōkai y Intelligent Materials Forum (Mitō Kagaku Gijutsu Kyōkai), eds. Smart structures and materials 2000.: 6-9 March, 2000, Newport Beach, USA. Bellingham, Washington: SPIE, 2000.

Saravanos, D. A. Optimal fabrication processes for unidirectional metal-matrix composites: A computational simulation. [Washington, D.C.]: NASA, 1990.

Saravanos, D. A. Computational simulation of damping in composite structures. [Washington, D.C.]: National Aeronautics and Space Administration, 1990.

C, Chamis C. y United States. National Aeronautics and Space Administration., eds. Computational simulation of damping in composite structures. [Washington, D.C.]: National Aeronautics and Space Administration, 1990.

1948-, Varadan V. V., Chandra J, Society of Photo-optical Instrumentation Engineers., American Society of Mechanical Engineers. y Wright Laboratory (Wright-Patterson Air Force Base, Ohio), eds. Smart structures and materials 1996. Bellingham, Wash: SPIE, 1996.