Literatura académica sobre el tema "MICROBALLOONS"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "MICROBALLOONS".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "MICROBALLOONS"
Dando, Kerrick R., William M. Cross, Marc J. Robinson y David R. Salem. "Characterization of mixture epoxy syntactic foams highly loaded with thermoplastic and glass microballoons". Journal of Composite Materials 53, n.º 13 (27 de noviembre de 2018): 1737–49. http://dx.doi.org/10.1177/0021998318810782.
Texto completoUllas, A. V., Devendra Kumar y Prasun Kumar Roy. "Epoxy-Glass Microballoon Syntactic Foams: Rheological Optimization of the Processing Window". Advances in Polymer Technology 2019 (1 de abril de 2019): 1–12. http://dx.doi.org/10.1155/2019/9180302.
Texto completoDando, Kerrick R., William M. Cross, Marc J. Robinson y David R. Salem. "Production and characterization of epoxy syntactic foams highly loaded with thermoplastic microballoons". Journal of Cellular Plastics 54, n.º 3 (23 de marzo de 2017): 499–514. http://dx.doi.org/10.1177/0021955x17700093.
Texto completoKannan, Sathish, Salman Pervaiz, Abdulla Alhourani, Robert J. Klassen, Rajiv Selvam y Meysam Haghshenas. "On the Role of Hollow Aluminium Oxide Microballoons during Machining of AZ31 Magnesium Syntactic Foam". Materials 13, n.º 16 (11 de agosto de 2020): 3534. http://dx.doi.org/10.3390/ma13163534.
Texto completoZhi, Chao y Hairu Long. "Flexural Properties of Syntactic foam Reinforced by Warp Knitted Spacer Fabric". Autex Research Journal 16, n.º 2 (1 de junio de 2016): 57–66. http://dx.doi.org/10.1515/aut-2015-0028.
Texto completoRafeichik, Sergey. "Dependence of Critical Diameter of Emulsion Explosive on Density in Steel Confinement". Siberian Journal of Physics 8, n.º 3 (1 de octubre de 2013): 128–34. http://dx.doi.org/10.54362/1818-7919-2013-8-3-128-134.
Texto completoSrivastava, Ankita, Ruchi Shukla, Kusum Sharma, Hitesh Jain y D. B. Meshram. "Microballoons: A Gastro Retentive Drug Delivery System". Journal of Drug Delivery and Therapeutics 9, n.º 4-s (15 de agosto de 2019): 625–30. http://dx.doi.org/10.22270/jddt.v9i4-s.3274.
Texto completoJohn, Bibin, C. P. Reghunadhan Nair y K. N. Ninan. "Low-Density Phenolic Syntactic Foams: Processing and Properties". Cellular Polymers 26, n.º 4 (julio de 2007): 229–44. http://dx.doi.org/10.1177/026248930702600401.
Texto completoFerreira, S. C., Alexandre Velhinho, L. A. Rocha y Francisco Manuel Braz Fernandes. "Microstructure Characterization of Aluminium Syntactic Functionally Graded Composites Containing Hollow Ceramic Microspheres Manufactured by Radial Centrifugal Casting". Materials Science Forum 587-588 (junio de 2008): 207–11. http://dx.doi.org/10.4028/www.scientific.net/msf.587-588.207.
Texto completoPenjuri, S. C. B., R. Nagaraju, S. Shaik, S. Damineni y S. R. Poreddy. "GASTRORETENTIVE MICROBALLOONS OF RIBOFLAVIN: FORMULATION AND EVALUATION". INDIAN DRUGS 54, n.º 04 (28 de abril de 2017): 47–52. http://dx.doi.org/10.53879/id.54.04.10708.
Texto completoTesis sobre el tema "MICROBALLOONS"
Brun, Etienne. "Influence des paramètres d'élaboration sur les propriétés mécaniques et microstructurales de microballons métalliques obtenus par électrolyse". Thesis, Dijon, 2012. http://www.theses.fr/2012DIJOS112.
Texto completoThe aim of this PhD Thesis is to study the gold-copper cyanide electrochemicalsystem and finally to realize gold-copper microspheres with a diameter of 800 μm and athickness between 20 and 40 μm. The composition, the microstructure and the roughness ofthese shells must be perfectly controlled. To synthesise such a material, electrodepositionfrom a gold-copper alkaline cyanide bath has been chosen.Initially, the influence of the principal electrochemical parameters (temperature of theplating bath, stirring, etc.) was studied. This study showed that it is possible to realize5 μm thick gold-copper alloys with various compositions. Actually, it was shown that thecopper content of deposits varies with the applied potential. When increasing the coppercontent of coatings, the nucleation and growth mechanisms change. As a result, the grain sizeand the microhardness of the coatings are modified. An increase in the copper content reducesthe grain size witch increases the microhardness until a critical grain size of 6 nm. Thisincrease of copper content also affects the microstructure: columnar, nodular even dendriticalstructures were observed.Then, 20 μm thick gold-copper coatings were realized using the same electrochemicalparameters. As expected, these coatings were very difficult to plate because of the instabilityof the electrocrystallization process resulting in the development of columnar and nodularstructures. Moreover, for thicknesses above 10 μm, all deposits are free from copper. Themicrostructure change of deposits can be explained by inhibition phenomena generated byfree cyanide. Actually, the reduction of gold-copper generates free cyanide at the cathodesurface which inhibits the electrocrystallization and promotes instantaneous nucleation. Thisproduction of free cyanide also modifies the electrolyte chemistry promoting the formation ofCu(CN)43- instead of Cu(CN)32-. Cu(CN)43- complexes have lower diffusion coefficients andhigher activation energy witch explains why copper content reduces when increasing thethickness of deposits.Then a model was established which explains the influence of free cyanide on thegold-copper electrocrystallization. This model permitted to develop solutions in order to limitthe inhibition phenomena and to optimize the electrocrystallization of gold-copper.One of the solutions developed is the application of an ultrasonic field. The cavitationgenerated by the ultrasonic field eliminates the free cyanide from the cathode surface andoptimize the electrocrystallization process. Gold-copper deposits on shells were then platedunder sonication. SEM and EDS results show that it is possible to make 20 to 40 μm thickcoatings with a controlled composition. All the coatings plated under sonication were smooth(80 ≤ Ra ≤ 230 nm) and compact for various copper contents. The microhardness of thesecoatings varies with grain size (Hall-Petch relation) which depends of copper content
Dutto, Vincent. "Mesure des défauts de forme de microballons par imagerie X : exploitation du phénomène de constraste de phase". Thesis, Toulon, 2018. http://www.theses.fr/2018TOUL0013/document.
Texto completoSince 1996, the CEA's Military Applications Division (DAM) guaranties the reliability and safety of Frenchnuclear warheads without conducting any further nuclear test. It relies particularly on major facilities forvalidating the equations used to model the functioning of nuclear weapons. Among them, the Megajoule Laser(LMJ) allows studying experimentally, as "laboratory" measurements, representative phenomena gatheringtime·scale and space distribution of extreme temperature and pressure conditions. These experiments are ledwith millimetric objects named microshells. Before experimenting them, these microshells are characterizedusing X·rays technics. On the radiographies, one can observe straight gray level variations which are generatedby the phase contrast phenomenon added to x·rays absorption contrast. Information included in this formercontrast is used to sharply determine microshell's edges. The delimiting points of these edges are thenintegrated as input data to compute microshell's surface form defects. A study is also led to determine theoptimized number of radiographies needed for estimating the search defect modes. Measurement uncertainty isfinally evaluated, thus giving a complete microshell's characterization
Lamy, Francis. "Mesure par méthodes optiques de l'épaisseur et de la rugosité d'une couche de DT solide conformée dans un microballon". Dijon, 2003. http://www.theses.fr/2003DIJOS056.
Texto completoThe inertial confinement fusion experiments require cryogenics targets fabrication, which is mainly a smooth uniform solid hydrogen isotopes (DT) layer at 20K. This layer is modelled in a plastic microshell that is placed in a gold cavity. One of the challenges of this program is to guarantee roughness and uniformity of the layer. Similar objects does not exist at ambient temperature. This report presents three methods convenient to characterise this layer in cryogenic conditions, with only one observation direction. The first one, shadowgraphy consists of the observation of the microshell thank to an optical system. The analyse of shadowgraph allows the DT layer characterisation in an equatorial plan. The two others techniques are the optical coherent tomography and the wide band interferometry. These methods provide the measurement of the layer thickness at the poles of microshell. The interference patterns are formed by the interference on two waves. The first one is reflected on a reference mirror, the second one is reflected on the interfaces of the microshell. The performances and uncertainties of the methods are analysed
Lattaud, Cecile. "Synthesis of low density foam shells for inertial confinement fusion experiments". Thesis, Dijon, 2011. http://www.theses.fr/2011DIJOS033/document.
Texto completoThis work deals with the fabrication process of low density foam shells and the sharp control of their shape (diameter, thickness, density, sphericity, non-concentricity). During this PhD we focused on the non-concentricity criterion which has to be lower than 1%. The shells are synthesized using a microencapsulation process leading to a double emulsion and followed by a thermal polymerization at 60°C. According to the literature, three major parameters, the density of the three phases, the deformations of the shells along the process and the kinetics of the polymerization have a direct influence on the shells non-concentricity. The results obtained showed that when the density gap between the internal water phase and the organic phase increases, the TMPTMA shells non-concentricity improves. A density gap of 0.078 g.cm-3 at 60°C, leads to an average non-concentricity of 2.4% with a yield of shells of 58%. It was also shown that the synthesis process can be considered as reproducible. While using the same internal water phase, equivalent non-concentricity results are obtained using either a straight tube, a tube with areas of constriction or a short wound tube. The time required to fix the shell’s shape is at least 20 minutes with thermal polymerization. So, it seems that the time spent by the shells inside the rotating flask allows the centering of the internal water phase inside the organic phase, whatever the circulation process used. In order to get higher polymerization rates and to avoid destabilization phenomena, we then focused our study on photopolymerization. When the synthesis is performed using a UV lamp with an efficient light intensity, the shells have a slightly higher thickness than the shells synthesized by thermal polymerization. Moreover, a really higher yield, around 80%, is achieved with UV polymerization. However, the average non-concentricity of the shells synthesized lays around 20%, which is really high compared to the 2.4% average non-concentricity obtained with thermal polymerization. It would be interesting to expose the shells to UV light at different times after collection in order to study the influence of the agitation time on the shells non-concentricity
CHAUHAN, DEEPIKA. "SILICONE MICROSPHERE FILLED SYNTACTIC FOAM". Thesis, 2016. http://dspace.dtu.ac.in:8080/jspui/handle/repository/15105.
Texto completoKumar, Dhirendra. "Study of Deformation and Erosion Behaviour of Epoxy-Glass Microballoon Based Syntactic Foam". Thesis, 2015. http://ethesis.nitrkl.ac.in/7143/1/Study_KumarD_2015.pdf.
Texto completoLibros sobre el tema "MICROBALLOONS"
Ivanovich, Isakov Alekseĭ, ed. Laser thermonuclear targets and superdurable microballoons. Commack, N.Y: Nova Science Publishers, 1996.
Buscar texto completoUnited States. National Aeronautics and Space Administration., ed. Humidity effects on soluble core mechanical and thermal properties (polyvinyl alcohol/microballoon composite) type 'CG' endospheres. Biddeford, Maine: Energy Materials Testing Laboratory, 1993.
Buscar texto completoLaser Thermonuclear Targets and Superdurable Microballoons: Proceedings of the Lebedev Physics Institute (Laser Thermonuclear Targets & Superdurable Microballoons). Nova Science Publishers, 1996.
Buscar texto completoCapítulos de libros sobre el tema "MICROBALLOONS"
Gooch, Jan W. "Microballoons". En Encyclopedic Dictionary of Polymers, 461. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_7468.
Texto completoHawkins, G. F., James R. Lhota, J. R. Hribar y E. C. Johnson. "Acoustic Emissions from Pressurized Microballoons". En Review of Progress in Quantitative Nondestructive Evaluation, 989–93. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2848-7_126.
Texto completoFernandes, Paulo, Melanie Pretzl, Andreas Fery, George Tzvetkov y Rainer Fink. "Novel Characterization Techniques of Microballoons". En Ultrasound Contrast Agents, 109–27. Milano: Springer Milan, 2010. http://dx.doi.org/10.1007/978-88-470-1494-7_9.
Texto completoStigler, Johannes, Martin Lundqvist, Tommy Cedervall, Kenneth Dawson y Iseult Lynch. "Protein Interactions with Microballoons: Consequences for Biocompatibility and Application as Contrast Agents". En Ultrasound Contrast Agents, 53–66. Milano: Springer Milan, 2010. http://dx.doi.org/10.1007/978-88-470-1494-7_5.
Texto completoPanigrahi, Pradipta Kumar. "Turbulence Control (Microflap, Microballoon, Microsynthetic Jet)". En Encyclopedia of Microfluidics and Nanofluidics, 3373–84. New York, NY: Springer New York, 2015. http://dx.doi.org/10.1007/978-1-4614-5491-5_1633.
Texto completoPanigrahi, Pradipta Kumar. "Turbulence Control (Microflap, Microballoon, Microsynthetic Jet)". En Encyclopedia of Microfluidics and Nanofluidics, 1–14. Boston, MA: Springer US, 2013. http://dx.doi.org/10.1007/978-3-642-27758-0_1633-3.
Texto completoMohan, Virender Kumar y Debesh Bhoi. "Percutaneous Microballoon Compression for Trigeminal Neuralgia". En Handbook of Trigeminal Neuralgia, 151–60. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-2333-1_20.
Texto completoManakari, Vyasaraj, Gururaj Parande, Mrityunjay Doddamani, T. S. Srivatsan y Manoj Gupta. "Tribological Response of Magnesium/Glass Microballoon Syntactic Foams". En The Minerals, Metals & Materials Series, 311–20. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92567-3_19.
Texto completoDando, Kerrick R. y David R. Salem. "Nano-additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams". En Proceedings of the 3rd Pan American Materials Congress, 393–402. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-52132-9_40.
Texto completoKawashima, Yoshiaki. "Development of Novel Microsphere and Microballoon DDSs by Polymeric Spherical Crystallization". En Spherical Crystallization as a New Platform for Particle Design Engineering, 59–76. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6786-1_5.
Texto completoActas de conferencias sobre el tema "MICROBALLOONS"
Lin, Tien-Chih y Nikhil Gupta. "Impact Properties of Syntactic Foams and Effect of Microballoon Wall Thickness". En ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13616.
Texto completoMadawela, Raghvan, Zhenyu Ouyang, Gefu Ji, Guoqiang Li y Samuel Ibekwe. "Mechanical Properties of New Hybrid Materials: Metallic Foam Filled With Syntactic Foam". En ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57725.
Texto completoEl-Hadek, Medhat A. y Hareesh V. Tippur. "Dynamic Fracture Behavior of Syntactic Epoxy Foams: Optical Measurements and Analysis". En ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/amd-25411.
Texto completoBradley, D. K., J. Delettrez, P. A. Jaanimagi, F. J. Marshall, C. P. Verdon, J. D. Kilkenny y P. Bell. "X-Ray Gated Images Of Imploding Microballoons". En 32nd Annual Technical Symposium, editado por Gary L. Stradling. SPIE, 1989. http://dx.doi.org/10.1117/12.948670.
Texto completoWahab, M. A., V. B. Gorugantu y Nikhil Gupta. "Enhancement of Fracture Toughness of Syntactic Foams by Rubber Addition". En ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82423.
Texto completoStampley, Kamissia, Eyassu Woldesenbet y Manu John. "Nanoclay Based Grid Stiffened Syntactic Foam Composites". En ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25771.
Texto completoDinbergs, A. E. y D. T. Auckland. "Sheet impedance characteristics for bound thin sheets of metal-coated microballoons". En IEEE Antennas and Propagation Society International Symposium 1992 Digest. IEEE, 1992. http://dx.doi.org/10.1109/aps.1992.221947.
Texto completoYoon, Sang-Hee, Vimalier Reyes-Ortiz y Mohammad R. K. Mofrad. "MEMS-Based Microballoons Achieving Multidirectional Large-Strain for Cell Mechanics Studies". En ASME 2009 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2009. http://dx.doi.org/10.1115/sbc2009-206853.
Texto completoMylavarapu, Phani, Guoqiang Li, Nikhil Gupta, Rahul Maharsia y Eyassu Woldesenbet. "Ultrasonic Signal Attenuation in Syntactic Foams Filled With Rubber Particles". En ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59375.
Texto completoGupta, Nikhil y Eyassu Woldesenbet. "Deformation and Fracture Characteristics of Cenosphere Filled Epoxies Under Compressive Loading Conditions". En ASME 2001 Engineering Technology Conference on Energy. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/etce2001-17022.
Texto completoInformes sobre el tema "MICROBALLOONS"
Simpson, R. y F. Helm. The shock Hugoniot of glass microballoons. Office of Scientific and Technical Information (OSTI), diciembre de 1994. http://dx.doi.org/10.2172/86942.
Texto completoHartman, E. Frederick, Thomas Andrew Zarick, Timothy J. Sheridan y Eric F. Preston. Prompt radiation-induced conductivity in polyurethane foam and glass microballoons. Office of Scientific and Technical Information (OSTI), junio de 2014. http://dx.doi.org/10.2172/1200673.
Texto completoKeller, Jennie. Literature Review: An Overview of Epoxy Resin Syntactic Foams with Glass Microballoons. Office of Scientific and Technical Information (OSTI), marzo de 2014. http://dx.doi.org/10.2172/1123771.
Texto completoChang, D. J., J. P. Nokes y F. Hai. Stress Measurement Technique Using Microballoons with Carbon Fibers Embedded in an RTV Film,. Fort Belvoir, VA: Defense Technical Information Center, junio de 1997. http://dx.doi.org/10.21236/ada326263.
Texto completoHooper, C. F. Jr. [Time resolved plasma spectroscopy of imploded gas-filled microballoons: The next generation]. Final technical report, 17 April 1995--30 September 1997. Office of Scientific and Technical Information (OSTI), marzo de 1998. http://dx.doi.org/10.2172/663263.
Texto completoHe, M. Y. y F. W. Zok. On the Mechanics of Microballoon-Reinforced Metal Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, abril de 1994. http://dx.doi.org/10.21236/ada277928.
Texto completoKeller, Jennie, Zachary Smith, Mollie Bello y Nikolaus Lynn Cordes. Plackett-Burman Analysis of Glass Microballoon Filled Syntactic Foams. Office of Scientific and Technical Information (OSTI), agosto de 2014. http://dx.doi.org/10.2172/1150667.
Texto completoBrown, Judith Alice y Kevin Nicholas Long. Exemplar for simulation challenges: Large-deformation micromechanics of Sylgard 184/glass microballoon syntactic foams. Office of Scientific and Technical Information (OSTI), mayo de 2018. http://dx.doi.org/10.2172/1436920.
Texto completoBrown, Judith Alice y Kevin Nicholas Long. Modeling the Effect of Glass Microballoon (GMB) Volume Fraction on Behavior of Sylgard/GMB Composites. Office of Scientific and Technical Information (OSTI), mayo de 2017. http://dx.doi.org/10.2172/1367414.
Texto completo