Literatura académica sobre el tema "Metal Phosphate Porous Materials"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Metal Phosphate Porous Materials".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "Metal Phosphate Porous Materials"
Podgorbunsky, Anatoly B., O. O. Shichalin y S. V. Gnedenkov. "Composite Materials Based on Magnesium and Calcium Phosphate Compounds". Materials Science Forum 992 (mayo de 2020): 796–801. http://dx.doi.org/10.4028/www.scientific.net/msf.992.796.
Texto completoShablovski, Vladimir, Alla Tuchkoskaya, Vladimir Rukhlya, Olga Pap y Kateryna Kudelko. "THE STUDY OF THE SORPTION PROPERTIES OF FILTERING MATERIALS BASED ON TITANIUM PHOSPHATE - POROUS TITANIUM COMPOSITION". WATER AND WATER PURIFICATION TECHNOLOGIES. SCIENTIFIC AND TECHNICAL NEWS 31, n.º 3 (22 de diciembre de 2021): 19–25. http://dx.doi.org/10.20535/2218-930032021244507.
Texto completoHan, Ruo Bing, Chun Lei Wan, Hui Wu y Wei Pan. "An Original Process of Nanoporous Materials via Templating Nickel Phosphate Colloidal Particles". Key Engineering Materials 368-372 (febrero de 2008): 1706–8. http://dx.doi.org/10.4028/www.scientific.net/kem.368-372.1706.
Texto completoRokosz, Krzysztof, Tadeusz Hryniewicz, Steinar Raaen, Sofia Gaiaschi, Patrick Chapon, Dalibor Matýsek, Kornel Pietrzak, Monika Szymańska y Łukasz Dudek. "Metal Ions Supported Porous Coatings by Using AC Plasma Electrolytic Oxidation Processing". Materials 13, n.º 17 (31 de agosto de 2020): 3838. http://dx.doi.org/10.3390/ma13173838.
Texto completoNandi, Mahasweta, Asim Bhaumik y Nawal K. Mal. "From Porous Metal Phosphates to Oxophenylphosphates: A Review". Recent Patents on Materials Science 3, n.º 2 (23 de abril de 2010): 151–66. http://dx.doi.org/10.2174/1874465611003020151.
Texto completoLiao, Chwen-Haw, Kun Fan, Song-Song Bao, Hao Fan, Xi-Zhang Wang, Zheng Hu, Mohamedally Kurmoo y Li-Min Zheng. "From a layered iridium(iii)–cobalt(ii) organophosphonate to an efficient oxygen-evolution-reaction electrocatalyst". Chemical Communications 55, n.º 92 (2019): 13920–23. http://dx.doi.org/10.1039/c9cc06164a.
Texto completoCutrone, Li, Casas-Solvas, Menendez-Miranda, Qiu, Benkovics, Constantin et al. "Design of Engineered Cyclodextrin Derivatives for Spontaneous Coating of Highly Porous Metal-Organic Framework Nanoparticles in Aqueous Media". Nanomaterials 9, n.º 8 (1 de agosto de 2019): 1103. http://dx.doi.org/10.3390/nano9081103.
Texto completoLee, Sanghan y Jaephil Cho. "Stacked porous tin phosphate nanodisk anodes". Chemical Communications 46, n.º 14 (2010): 2444. http://dx.doi.org/10.1039/b924381j.
Texto completoSpriano, Silvia, Anna Dmitruk, Krzysztof Naplocha y Sara Ferraris. "Tannic Acid Coatings to Control the Degradation of AZ91 Mg Alloy Porous Structures". Metals 13, n.º 2 (19 de enero de 2023): 200. http://dx.doi.org/10.3390/met13020200.
Texto completoMedvecky, Lubomir, Radoslava Stulajterova, Maria Giretova, Tibor Sopcak, Maria Faberova, Miroslav Hnatko y Tatana Fenclova. "Calcium Phosphate Cement Modified with Silicon Nitride/Tricalcium Phosphate Microgranules". Powder Metallurgy Progress 20, n.º 1 (1 de junio de 2020): 56–75. http://dx.doi.org/10.2478/pmp-2020-0006.
Texto completoTesis sobre el tema "Metal Phosphate Porous Materials"
Yang, Zhu. "Preparation and Application of Hierarchically Porous Monolithic Materials with Embedded Nanoscale Interfaces". 京都大学 (Kyoto University), 2016. http://hdl.handle.net/2433/215332.
Texto completoWharmby, Michael T. "Synthesis of porous metal phosphonate frameworks for applications in gas separation and storage". Thesis, University of St Andrews, 2012. http://hdl.handle.net/10023/3450.
Texto completoSu, Zixue. "Porous anodic metal oxides". Thesis, University of St Andrews, 2010. http://hdl.handle.net/10023/1019.
Texto completoZheng, Yu 1970. "Modelling of solidification of porous metal-hydrogen alloys". Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/37004.
Texto completoTaksande, Kiran. "Exploration of the Ionic Conduction Properties of Porous MOF Materials". Thesis, Université de Montpellier (2022-….), 2022. http://www.theses.fr/2022UMONS010.
Texto completoThe conductivity performance of a new series of chemically stable proton conducting Metal Organic Frameworks (MOFs) as well as a superionic molecular crystal was explored. The contribution of this PhD was to (i) select a variety of architectures and functionalities of robust MOFs/superionic molecular solids and (ii) characterize and rationalize their conducting performance over various temperature/humidity conditions. We designed two series of MOFs to achieve promising proton-conducting performance, using distinct approaches to modulate the concentration of Brønsted acidic sites and charge carriers and further boost the conductivity properties. First, a multicomponent ligand replacement strategy was successfully employed to elaborate a series of multivariate sulfonic-based solids MIP-207-(SO3H-IPA)x-(BTC)1–x which combine structural integrity with high proton conductivity values (e.g., σ = 2.6 × 10–2 S cm–1 at 363 K/95% Relative Humidity -RH-). Secondly, a proton conducting composite was prepared through the impregnation of an ionic liquid (1-Ethyl-3-methylimidazolium chloride, EMIMCl) in the mesoporous MIL-101(Cr)-SO3H. The resulting composite displaying high thermal and chemical stability, exhibits outstanding proton conductivity not only at the anhydrous state (σ473 K = 1.5 × 10-3 S cm-1) but also under humidity (σ(343 K/60%-80%RH) ≥ 0.10 S cm-1) conditions. Finally, the ionic conducting properties of another class of porous solids, considering a zirconium-formate molecular solid containing KCl ion pairs (ZF-3) were explored. ZF-3 switches from an insulator (σ = 5.1 x 10-10 S cm-1 at 363 K/0% RH) to a superionic conductor upon hydration (σ = 5.2 x 10-2 S cm-1 at 363 K/95 % RH), in relation with the boost of Cl- dynamics upon water adsorption. Noteworthy, quantum- and force-field based simulations were combined with the experimental approach to elucidate the microscopic mechanisms at the origin of the ionic conducting properties of the studied materials. This fundamental knowledge will serve to create novel robust superionic conductors with outstanding performances that will pave the way towards appealing societal applications for clean energy production
Mu, Bin. "Synthesis and gas adsorption study of porous metal-organic framework materials". Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/41097.
Texto completoZhao, Yue. "Preparation and investigation of group 13 metal organo-phosphate hybrid-framework materials". Winston-Salem, NC : Wake Forest University, 2009. http://dspace.zsr.wfu.edu/jspui/handle/10339/42608.
Texto completoTitle from electronic thesis title page. Thesis advisor: Abdessadek Lachgar. Vita. Includes bibliographical references (p. 140-156).
Mochizuki, Shuto. "Controlled radical polymerization in designed porous materials". Kyoto University, 2019. http://hdl.handle.net/2433/242535.
Texto completoAnnamalai, Perushini. "Electrospinning of porous composite materials for hydrogen storage application". University of the Western Cape, 2016. http://hdl.handle.net/11394/5654.
Texto completoDue to the rapid depletion of fossil fuel reserves and the production of environmentally harmful by-products such as carbon dioxide, there is an urgent need for alternate sustainable clean energy. One of the leading candidates in this endeavour is hydrogen, which can be used as an energy carrier since it has a high energy density, zero emissions and is produced from non-depletable resources such as water. The major challenge hindering a hydrogen economy is the lack of safe and effective storage technologies for mobile applications. A prospective solution to this problem lies in the use of porous powdered materials, which adsorb the hydrogen gas. However, the integration of these powdered materials into a storage tank system, results in the pipelines being contaminated during filling cycles. This necessitates the shaping of the porous powdered materials. Among the many shaping techniques available, the electrospinning technique has been proposed as a promising technology since it is a versatile process that is easily scaled-up making it attractive for the applications of the study. Furthermore, the electrospinning process enables the synthesis of nano-sized fibres with attractive hydrogen sorption characteristics. In this regard, the current study employs the electrospinning technique to synthesise electrospun composite fibres for mobile hydrogen storage applications. After electrospinning three polymers, polyacrylonitrile (PAN) was selected as the most suitable polymer because it yielded bead-free electrospun fibres. However, the diameter of the PAN fibres was large/thick which prompted further optimisation of the electrospinning parameters. The optimised electrospinning conditions that yield unbeaded fibres within the desired diameter range (of 300-500 nm) were a PAN concentration of 10 wt%, a flow rate of 0.4 mL/h, a distance of 10 cm between the needle tip and collector plate, and an applied voltage of 8 kV. The study then progressed to the synthesis and characterisation of the pristine porous powdered materials which adsorb hydrogen gas. The porous powdered materials investigated were commercial zeolite 13X, its synthesised templated carbon derivative (ZTC) and Zr (UiO-66) and Cr (MIL-101) based metal-organic frameworks (MOFs). ZTC was synthesised via liquid impregnation coupled with chemical vapour deposition (CVD), and the MOFs were synthesised by the modulated solvothermal method. Analysis of the ZTCs morphology and phase crystallinity show that the carbon templated process using zeolites was successful, however, ZTC was amorphous compared to crystalline zeolite template. The BET surface area was assessed with the aid of nitrogen sorption isotherms for both zeolite 13X and ZTC, and values of 730 and 2717 m²/g, respectively were obtained. The hydrogen adsorption capacity for zeolite 13X was 1.6 wt% and increased to 2.4 wt% in the ZTC material at 77 K and 1 bar. The successful synthesis of well defined, crystalline MOFs was evident from X-ray diffraction and morphological analysis. The BET surface area and hydrogen adsorption for Zr MOF were 1186 m²/g and 1.5 wt%, respectively at 77 K and 1 bar. Cr MOF had a BET surface area of 2618 m²/g and hydrogen adsorption capacity of 1.9 wt% at 77 K and 1 bar. The main focus of the study was to synthesise electrospun composite fibres that can adsorb hydrogen gas and thus provide significant insight in this field of research. As such it examined composite fibres that incorporates porous powdered materials such as zeolite 13X, ZTCs, UiO-66 (Zr) MOF and MIL-101 (Cr) MOF and investigated their ability to adsorb hydrogen gas, which have not been reported previously. The synthesis of composite fibres was achieved by incorporating the porous powdered materials into the PAN resulting in a polymeric blend that was then electrospun. Morphological analysis illustrated that the porous powdered materials were successfully supported by or incorporated within the PAN fibres, forming composite fibres. The BET surface area of the 40 wt% zeolite-PAN and 12.5 wt% ZTC-PAN composite fibres were 440 and 1787 m²/g respectively. Zr MOF and Cr MOF composite fibres had a BET surface area of 815 and 1134 m²/g, respectively. The BET surface area had reduced by 40, 34, 31 and 57% for zeolite 13X, ZTC, Zr MOF and Cr MOF, respectively after these porous powdered materials were incorporated into PAN. The hydrogen adoption capacity for 40 wt% zeolite-PAN, 12.5 wt% ZTC-PAN, 20 wt% Zr MOFPAN and 20 wt% Cr MOF-PAN composite fibres was 0.8, 1.8, 0.9 and 1.1 wt%, respectively. This decrease was attributed to the limited amount of porous powdered materials that could be incorporated into the fibres since only 40 wt% of zeolite 13X, 12.5 wt% of ZTC and 20 wt% of the MOFs were loaded into their respective composite fibres. This was due to the fact that incorporation of greater amounts of porous powdered materials resulted in a viscous polymeric blend that was unable to be electrospun. It is evident from the study that electrospinning is a versatile process that is able to produce composite fibres with promising properties that can potentially advance the research in this field thus providing a practical solution to the problem of integrating loose powdered materials into an on-board hydrogen storage system.
CSIR Young Researchers Establishment Fund (YREF)
Taksande, Kiran. "Exploration of the Ionic Conduction Properties of Porous MOF Materials". Thesis, Montpellier, 2022. https://ged.scdi-montpellier.fr/florabium/jsp/nnt.jsp?nnt=2022UMONS010.
Texto completoThe conductivity performance of a new series of chemically stable proton conducting Metal Organic Frameworks (MOFs) as well as a superionic molecular crystal was explored. The contribution of this PhD was to (i) select a variety of architectures and functionalities of robust MOFs/superionic molecular solids and (ii) characterize and rationalize their conducting performance over various temperature/humidity conditions. We designed two series of MOFs to achieve promising proton-conducting performance, using distinct approaches to modulate the concentration of Brønsted acidic sites and charge carriers and further boost the conductivity properties. First, a multicomponent ligand replacement strategy was successfully employed to elaborate a series of multivariate sulfonic-based solids MIP-207-(SO3H-IPA)x-(BTC)1–x which combine structural integrity with high proton conductivity values (e.g., σ = 2.6 × 10–2 S cm–1 at 363 K/95% Relative Humidity -RH-). Secondly, a proton conducting composite was prepared through the impregnation of an ionic liquid (1-Ethyl-3-methylimidazolium chloride, EMIMCl) in the mesoporous MIL-101(Cr)-SO3H. The resulting composite displaying high thermal and chemical stability, exhibits outstanding proton conductivity not only at the anhydrous state (σ473 K = 1.5 × 10-3 S cm-1) but also under humidity (σ(343 K/60%-80%RH) ≥ 0.10 S cm-1) conditions. Finally, the ionic conducting properties of another class of porous solids, considering a zirconium-formate molecular solid containing KCl ion pairs (ZF-3) were explored. ZF-3 switches from an insulator (σ = 5.1 x 10-10 S cm-1 at 363 K/0% RH) to a superionic conductor upon hydration (σ = 5.2 x 10-2 S cm-1 at 363 K/95 % RH), in relation with the boost of Cl- dynamics upon water adsorption. Noteworthy, quantum- and force-field based simulations were combined with the experimental approach to elucidate the microscopic mechanisms at the origin of the ionic conducting properties of the studied materials. This fundamental knowledge will serve to create novel robust superionic conductors with outstanding performances that will pave the way towards appealing societal applications for clean energy production
Libros sobre el tema "Metal Phosphate Porous Materials"
1936-, Unger Klaus Konradin y International Union of Pure and Applied Chemistry., eds. Characterization of porous solids. Amsterdam: Elsevier, 1988.
Buscar texto completoSmått, Jan-Henrik. Hierarchically porous silica, carbon, and metal oxide monoliths: Synthesis and characterization. Turku: Åbo Akademi University, 2005.
Buscar texto completoMacGillivray, Leonard. Metal-organic frameworks: Design and application. Hoboken, N.J: Wiley, 2010.
Buscar texto completoGultekin, Goller y United States. National Aeronautics and Space Administration., eds. Wear and friction behavior of metal impregnated microporous carbon composites. [Washington, D.C: National Aeronautics and Space Administration, 1997.
Buscar texto completoLeonard, MacGillivray, ed. Metal-organic frameworks: Design and application. Hoboken, N.J: Wiley, 2010.
Buscar texto completoMetal-organic frameworks: Applications from catalysis to gas storage. Weinheim: Wiley-VCH, 2011.
Buscar texto completoservice), SpringerLink (Online, ed. Functional Metal-Organic Frameworks: Gas Storage, Separation and Catalysis. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010.
Buscar texto completoClaudio, Morterra, Zecchina Adriano 1936-, Costa Giacomo 1922- y Associazione italiana di chimica fisica., eds. Structure and reactivity of surfaces: Proceedings of a European conference, Trieste, Italy, September 13-16, 1988. Amsterdam: Elsevier, 1989.
Buscar texto completoBlay, Vincent, Luis Francisco Bobadilla y Alejandro Cabrera, eds. Zeolites and Metal-Organic Frameworks. NL Amsterdam: Amsterdam University Press, 2018. http://dx.doi.org/10.5117/9789462985568.
Texto completoKapustin, Vladimir, Aleksandr Sigov, Illarion Li y Vladimir Mel'nikov. Point defects in oxides and emission properties. ru: INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1846464.
Texto completoCapítulos de libros sobre el tema "Metal Phosphate Porous Materials"
Azhar, Umair, Muhammad S. Bashir, Muhammad Arif y Muhammad Sagir. "Hierarchically Porous Metal Phosphates and Phosphonates: Emerging Materials Toward Advance Applications". En Metal Phosphates and Phosphonates, 21–40. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-27062-8_2.
Texto completoKepert, Cameron J. "Metal-Organic Framework Materials". En Porous Materials, 1–67. Chichester, UK: John Wiley & Sons, Ltd, 2010. http://dx.doi.org/10.1002/9780470711385.ch1.
Texto completoSadakane, Masahiro y Wataru Ueda. "Ordered Porous Crystalline Transition Metal Oxides". En Porous Materials, 147–215. Chichester, UK: John Wiley & Sons, Ltd, 2010. http://dx.doi.org/10.1002/9780470711385.ch3.
Texto completoKundu, Tanay, Leisan Gilmanova, Wai Fen Yong y Stefan Kaskel. "Metal-Organic Frameworks for Environmental Applications". En Porous Materials, 1–39. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65991-2_1.
Texto completoVishnoi, Pratap y Ramaswamy Murugavel. "Metal Silicate and Phosphate Nanomaterials". En Molecular Materials, 153–88. Boca Raton, FL : CRC Press, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/9781315118697-7.
Texto completoPan, Jian, Jie Mo Tian, Li Min Dong, Chen Wang y Qing Feng Zan. "Self-Setting Biphase Porous Calcium Phosphate Cement". En Key Engineering Materials, 1615–17. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.1615.
Texto completoDoménech-Carbó, Antonio. "Electrochemistry of Metal-Organic Frameworks". En Electrochemistry of Porous Materials, 101–12. 2a ed. Names: Domeénech-Carboó, Antonio, author. Title: Electrochemistry of porous materials / Antonio Domeénech Carboó. Description: Second edition. | Boca Raton : CRC Press, 2021.: CRC Press, 2021. http://dx.doi.org/10.1201/9780429351624-6.
Texto completoBaur, Hartmut, Klaus Lempenauer, Martin Hartweg, Günter Stephani, Olaf Andersen y Osmin Delverdier. "Porous Metal Fiber Components - POMFICO". En Materials for Transportation Technology, 95–102. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527606025.ch17.
Texto completoFeng, Bo, Jie Weng, Yu Liang, Shu Xin Qu, Jin Wang y Xiong Lu. "Fabrication of Porous Titania and Porous Calcium Phosphate Coatings on Titanium Surface". En Key Engineering Materials, 529–32. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-422-7.529.
Texto completoTas, A. Cuneyt. "Biomimetic Calcium Phosphate Synthesis by using Calcium Metal". En Advances in Bioceramics and Porous Ceramics VI, 93–106. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118807811.ch8.
Texto completoActas de conferencias sobre el tema "Metal Phosphate Porous Materials"
Gotman, I., S. K. Swain, A. Sharipova y E. Y. Gutmanas. "Bioresorbable Ca-phosphate-polymer/metal and Fe-Ag nanocomposites for macro-porous scaffolds with tunable degradation and drug release". En ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Author(s), 2016. http://dx.doi.org/10.1063/1.4966355.
Texto completoRabadjieva, D., S. Tepavitcharova, R. Gergulova, K. Sezanova, R. Ilieva, M. Gabrashanska y M. Alexandrov. "Calcium phosphate porous composites and ceramics prospective as bone implants". En 3RD INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS. AIP, 2013. http://dx.doi.org/10.1063/1.4849317.
Texto completoWEN, F. S., X. ZHAO, C. Y. XI y J. S. CHEN. "HYDROTHERMAL SYNTHESIS AND PHOTOLUMINESCENCE OF METAL PHOSPHATE-BASED MATERIALS". En Proceedings of the Seventh International Symposium on Hydrothermal Reactions. WORLD SCIENTIFIC, 2003. http://dx.doi.org/10.1142/9789812705228_0007.
Texto completoMabrook, M. F. "Electrical characteristics of metal contacts on porous silicon". En IEE Colloquium on Materials for Displays. IEE, 1995. http://dx.doi.org/10.1049/ic:19950981.
Texto completoNazarenko, N. N. y A. G. Knyazeva. "Effective diffusion coefficient of biological liquids in porous calcium phosphate coatings". En ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Author(s), 2016. http://dx.doi.org/10.1063/1.4966455.
Texto completoYao, Lin, Gui-Lin Yu, Su Cheng, Shu-Cheng Mu y Nan Li. "Study on Preparation of Porous Beta-tricalcium Phosphate Scaffold by In-situ Decomposition Method". En The 2nd Annual International Workshop on Materials Science and Engineering (IWMSE 2016). WORLD SCIENTIFIC, 2017. http://dx.doi.org/10.1142/9789813226517_0154.
Texto completoZhang, Hang, Chongxiong Duan, Feier Li y Hongxia Xi. "Rapid room-temperature synthesis of hierarchical porous metal organic frameworks". En MATERIALS SCIENCE, ENERGY TECHNOLOGY AND POWER ENGINEERING II (MEP2018). Author(s), 2018. http://dx.doi.org/10.1063/1.5041118.
Texto completoNabil, Marwa y Hussien A. Motaweh. "Porous silicon powder as an adsorbent of heavy metal (nickel)". En 2018 6TH INTERNATIONAL CONFERENCE ON NANO AND MATERIALS SCIENCE: ICNMS 2018. Author(s), 2018. http://dx.doi.org/10.1063/1.5034324.
Texto completoOabi, O., A. Maaroufi, B. Lucas, S. Degot y A. El Amrani. "Composites of zinc phosphate glass/metal: New materials for thermoelectricity and solar cell devices". En 2014 International Renewable and Sustainable Energy Conference (IRSEC). IEEE, 2014. http://dx.doi.org/10.1109/irsec.2014.7059838.
Texto completoAsano, S., T. Makuta y G. Murasawa. "Fabrication of grape-like structures with micro capsule covering metal powder, and application to novel porous metal". En SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, editado por Nakhiah C. Goulbourne y Zoubeida Ounaies. SPIE, 2012. http://dx.doi.org/10.1117/12.915131.
Texto completoInformes sobre el tema "Metal Phosphate Porous Materials"
Kanan, Sofian M. Synthesis of Metal Nanoclusters Doped in Porous Materials as Photocatalysts. Fort Belvoir, VA: Defense Technical Information Center, abril de 2008. http://dx.doi.org/10.21236/ada503178.
Texto completoCastafieda, P. P. Metal-Matrix Composites and Porous Materials: Constitute Models, Microstructure Evolution and Applications. Fort Belvoir, VA: Defense Technical Information Center, febrero de 2000. http://dx.doi.org/10.21236/ada376316.
Texto completo