Literatura académica sobre el tema "Mechanical properties of material"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Mechanical properties of material".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "Mechanical properties of material"
Gotoh, Masaru, Ken Suzuki y Hideo Miura. "OS12-4 Control of Mechanical Properties of Micro Electroplated Copper Interconnections(Mechanical properties of nano- and micro-materials-1,OS12 Mechanical properties of nano- and micro-materials,MICRO AND NANO MECHANICS)". Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 186. http://dx.doi.org/10.1299/jsmeatem.2015.14.186.
Texto completoMarlor, S. S., I. Miskioglu y J. Ligon. "DYNAMIC MATERIAL PROPERTIES IN BIREFRINGENT MATERIALS". Experimental Techniques 18, n.º 4 (julio de 1994): 39–42. http://dx.doi.org/10.1111/j.1747-1567.1994.tb00288.x.
Texto completoMohd Riza, Nor Syaheera, Nuryazmin Ahmat Zainuri, Mohd Zaki Nuawi, Noorhelyna Razali y Haliza Othman. "Pencirian Sifat Mekanikal Bahan dengan Pendekatan Analisis Fraktal". Jurnal Kejuruteraan si5, n.º 2 (30 de noviembre de 2022): 111–18. http://dx.doi.org/10.17576/jkukm-2022-si5(2)-12.
Texto completoNamazu, Takahiro. "OS12-1 MEMS and Nanotechnology for Experimental Mechanics(invited,Mechanical properties of nano- and micro-materials-1,OS12 Mechanical properties of nano- and micro-materials,MICRO AND NANO MECHANICS)". Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 183. http://dx.doi.org/10.1299/jsmeatem.2015.14.183.
Texto completoLaspidou, C. S., L. A. Spyrou, N. Aravas y B. E. Rittmann. "Material modeling of biofilm mechanical properties". Mathematical Biosciences 251 (mayo de 2014): 11–15. http://dx.doi.org/10.1016/j.mbs.2014.02.007.
Texto completoCakar, Siver y Andrea Ehrmann. "3D Printing with Flexible Materials – Mechanical Properties and Material Fatigue". Macromolecular Symposia 395, n.º 1 (febrero de 2021): 2000203. http://dx.doi.org/10.1002/masy.202000203.
Texto completoMihalko, William M., Armand J. Beaudoin y William R. Krause. "Mechanical Properties and Material Characteristics of Orthopaedic Casting Material". Journal of Orthopaedic Trauma 3, n.º 1 (1989): 57–63. http://dx.doi.org/10.1097/00005131-198903010-00011.
Texto completoXue, He, Yueqi Bi, Shuai Wang, Jianlong Zhang y Siyu Gou. "Compilation and Application of UMAT for Mechanical Properties of Heterogeneous Metal Welded Joints in Nuclear Power Materials". Advances in Materials Science and Engineering 2019 (22 de noviembre de 2019): 1–12. http://dx.doi.org/10.1155/2019/3151823.
Texto completoZaki, Harith, Iqbal Gorgis y Shakir Salih. "Mechanical properties of papercrete". MATEC Web of Conferences 162 (2018): 02016. http://dx.doi.org/10.1051/matecconf/201816202016.
Texto completoLiu, Wen Guang y Cheng Yan. "Impacts of Temperature on Mechanical Properties of FGMs". Applied Mechanics and Materials 633-634 (septiembre de 2014): 391–95. http://dx.doi.org/10.4028/www.scientific.net/amm.633-634.391.
Texto completoTesis sobre el tema "Mechanical properties of material"
Robertson, Alec 1974. "Material properties of actin filament bundles". Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/46628.
Texto completoIncludes bibliographical references (p. 119-127).
Actin is an ubiquitous structural protein fundamental to such biological processes as cell motility and muscle contraction. Our model system is the acrosomal process of the Limulus sperm which extends a 60 ýtm long actin bundle during reproduction. It is an example of a biological spring where the force of elongation derives from twist energy stored within the bundle during spermatogenesis. In addition to actin the acrosome comprises only one other protein: scruin, an actin-binding protein specific to Limulus that decorates and crosslinks actin filaments into a crystalline bundle. Our goal is to reconstitute the structure of the acrosome using these two proteins in order to further elucidate the role of scruin in actin bundle crosslinking.A multi-scale approach is presented wherein the bending rigidity of scruin bundles and their constituent filaments are probed individually, then inter-related by simple mechanical models. Material properties of filaments and bundles are measured using a combination of optical tweezers, electron and fluorescence microscopy. We find that scruin bundles reconstituted from acrosome fragments display an ordered structure, with a bending rigidity orders of magnitude higher than their individual filaments. Actin bundles formed by depletion exhibit similar behavior, revealing an intrinsic regime of coupled actin bundle formation. Bundle elastic moduli are eight orders of magnitude stiffer than reconstituted networks and an order of magnitude softer than the native acrosome, highlighting scruin's ability to dictate a wide range of material properties depending on the formation conditions.
by Alec P. Robertson.
Ph.D.
Wiedenman, Nathan Scott. "Towards programmable materials : tunable material properties through feedback control of conducting polymers". Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/45889.
Texto completoIncludes bibliographical references (p. 159-168).
Mammalian skeletal muscle is an amazing actuation technology that can controllably modify its force and position outputs as well as its material properties such as stiffness. Unlike muscle, current engineering materials are limited by their intrinsic properties, dictated at the molecular level.This work is focused on developing an integrated device, called a programmable material, which mirrors the capabilities of natural co-fabricated controlled actuation systems such as muscle. While such a device may have the external appearance of a homogeneous material, it can possess unique properties not existing in any currently manufactured material. When actuation, sensing, and control capabilities are integrated within a closed-loop system, the mechanical properties of the system such as stiffness, viscosity, and inertia will arise from the dynamics of the feedback loop rather than from any inherent mechanical properties of the materials from which the device was fabricated. Moreover, these properties may be 'tuned' by altering the feedback parameters embedded in the material system. With this approach properties such as negative stiffness may be generated which do not exist in bulk materials.The most promising of the existing artificial muscle technologies is actuation with conducting polymer. Additionally, conducting polymer has been used to fabricate the position sensor and control electronics. Creating these components from a single type of material has made it possible to co-fabricate the system into an integrated device. This is the first research to attempt to create a co-fabricated, fully integrated conducting polymer feedback device. This work establishes the feasibility of building the device and answers many of the questions of fabrication and design.
by Nathan Scott Wiedenman.
Ph.D.
Kappiyoor, Ravi. "Mechanical Properties of Elastomeric Proteins". Diss., Virginia Tech, 2014. http://hdl.handle.net/10919/54563.
Texto completoPh. D.
Salahshoor, Pirsoltan Hossein. "Nanoscale structure and mechanical properties of a Soft Material". Digital WPI, 2013. https://digitalcommons.wpi.edu/etd-theses/924.
Texto completoDimas, Leon Sokratis Scheie. "Effective mechanical Properties of material models with random heterogeneities". Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/103706.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (pages 191-198).
In this thesis we obtain analytical approximations to the probability distribution of the elastic tensor and fracture strengths of material models with random heterogeneities. We start by investigating the effective elastic properties of one-, two-, and three-dimensional rectangular blocks whose Young's modulus varies spatially as a lognormal random field. We decompose the spatial fluctuations of the Young's log-modulus F = In E into first- and higher-order terms and find the joint distribution of the effective elastic tensor by multiplicatively combining the term-specific effects. Through parametric analysis of the analytical solutions, we gain insight into the effective elastic properties of this class of heterogeneous materials. Building on this analysis we find analytical approximations to the probability distribution of fracture properties of one-dimensional rods and thin two-dimensional plates for systems in which: only the Young's modulus varies spatially as an isotropic lognormal field and more generally, both the Young's modulus and the local material strength vary spatially as possibly correlated lognormal fields. The properties considered are the elongation, strength, and toughness modulus at fracture initiation and at ultimate failure. For all quantities at fracture initiation our approach is analytical in I D and semi-analytical in 2D. For ultimate failure, we quantify the random effects of fracture propagation and crack arrest by fitting regression models to simulation data and combine the regressions with the distributions at fracture initiation. Through parametric analysis, we gain insight into the strengthening/weakening roles of the Euclidean dimension, size of the specimen, and the correlation, variance and correlation function of the random fields. Finally, we extend the approach to investigate the elasticity of non-lognormal random heterogeneous materials. First we investigate the elastic bulk stiffness of two-dimensional checkerboard specimens in which square tiles are randomly assigned to one of two component phases. This is a model system for multi-phase polycrystalline materials such as granitic rocks and many ceramics. We study how the bulk stiffness is affected by different characteristics of the specimen and obtain analytical approximations to the probability distribution of the effective stiffness. In particular we examine the role of percolation of the soft and stiff phases. In small specimens, we find that the onset of percolation causes significant discontinuities in the effective modulus, whereas in large specimens the influence of percolation is smaller and gradual. Secondly we study the effective stiffness of multi-phase composite systems in which the Young's modulus varies as a filtered Poisson point process and find that the homogenization approach initially developed for lognormal systems produces accurate results also for this class of non-lognormal systems.
by Leon Sokratis Scheie Dimas.
Ph. D.
Engman, Alexander. "Mechanical properties of bulk alloys and cemented carbides". Thesis, KTH, Materialvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-230897.
Texto completoAnv¨andandet av kobolt (Co) som bindefas-material i h°ardmetall har blivit ifr°agasatt som en f¨oljdav av de potentiella h¨alsoriskerna associerade med inhalering av koboltpartiklar. Kobolt anv¨ands p°agrund av dess utm¨arkta vidh¨aftande och v¨atande egenskaper, kombinerat med tillr¨ackliga mekaniskaegenskaper. Syftet med detta arbete ¨ar att unders¨oka de mekaniska egenskaperna hos Fe-Ni bulklegeringarochWC-Co h°ardmetall genom att anv¨anda Integrated Computational Materials Engineering(ICME) metoder kombinerat med FEM-data. Rapporten unders¨oker de mekaniska egenskapernahos flera bulklegeringar i Fe-Ni systemet. FEM-indentering och FEM-fraktur data interpoleras ochanv¨ands f¨or att modellera h°ardheten H och brottsegheten KIc. En modell f¨or utskiljningsh¨ardningbaserad p°a Ashby-Orowans ekvation implementeras f¨or att f¨oruts¨aga e↵ekten p°a brottgr¨ansen av utskiljdapartiklar. ¨Aven en modell f¨or l¨osningsh¨ardning implementeras. Existerande modeller anv¨andsf¨or att simulera egenskaperna hos WC-Co h°ardmetall tillsammans med modellen f¨or l¨osningsh¨ardning.Resultaten visar att de simulerade egenskaperna hos Fe-Ni bulklegeringar ¨ar j¨amf¨orbara medde f¨or kobolt. Dock kan de inte bekr¨aftas p°a grund av avsaknad av experimentell data. Egenskapernahos WC-Co h°ardmetall st¨ammer rimligt ¨overens med existerande experimentell data, meden genomsnittlig avvikelse av h°ardheten med 11.5% och av brottsegheten med 24.8%. Slutsatserna¨ar att det beh¨ovs experimentell data f¨or Fe-Ni bulklegeringar f¨or att kunna verifiera modellernasnoggrannhet och att det ¨ar m¨ojligt att f¨oruts¨aga egenskaperna hos h°ardmetall.
Parenti, Cristina. "VARIATION OF THE LOCAL MATERIAL PROPERTIES OF AORTA". Master's thesis, Temple University Libraries, 2010. http://cdm16002.contentdm.oclc.org/cdm/ref/collection/p245801coll10/id/70843.
Texto completoM.S.E.
Understanding the aortic wall deformation and failure during traumatic aortic rupture (TAR), which is a leading cause of fatality in motor vehicle accidents is of great concern. The specific objective of the present study is to develop a material model that can describe the multi layer nature of the aortic wall. Fundamentally, the aortic wall is composed mainly of three layers, tunica intima, media and adventitia, and they are known to have different structures. Understanding the material properties of these layers is essential in order to study the local mechanisms of deformation, force transmission, and failure. The hypothesis of this study is that the tissue's instantaneous shear modulus grows along the radial direction while moving from the intima toward the adventitia. The higher compliance of the tissue near the intima, which is partly due to the concentration of the smooth muscle cells and partly due to the arrangement of collagen and elastin fibers, can explain the nature of aorta failure which is primarily generated from the inside towards the outer layers. A combination of micro- and nano-indentation tests were used to measure the local material properties of porcine aorta at the length scales of 160 µm and 40 µm respectively. The material properties of aorta were investigated in the lateral (left) region in several longitudinal locations of the descending aorta and the observed viscoelastic behavior was summarized in the form of instantaneous shear moduli and reduced relaxation functions. The instantaneous shear modulus was found to generally increase along the radial direction to about 0.6 normalized radial distance and then became almost constant but with higher variability. The reduced relaxation functions were generally independent of the location and test method. Comparing the mechanical results with the histological results obtained through Van-Guisen staining showed that the material properties are partly related to the distribution of smooth muscle cells. The results of this study can be used to explain the mechanisms of failure in aorta and contribute to improve the computational modeling of aorta's deformation which is valuable in a variety of applications including automotive accidents, endovascular grafts, and angioplasty.
Temple University--Theses
Kylström, Sanna. "The Effect of Twinning on the Mechanical Properties of Alloy 825". Thesis, KTH, Materialvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254760.
Texto completoTvillingbildning är ett känt fenomen inom materialvetenskap, men hur hör tvillingar, kornstorlek och sträckgräns ihop? Finns det ett samband? Undersökningar utförs med ett ljusoptiskt mikroskop för legering 825 på 19 prover, för att räkna ut tvillingfraktionen och kornstorleken. Detta jämförs sedan med sträckgränsen som man tillhandahåller från dragprov. Proverna har olika reduktion av sin dimension genom valsning och har glödgats olika tider. Det visar sig att tvillingbildning gör legering 825 något mjukare och mer duktil på en mindre skala, eftersom tvillingfraktionen ökar då sträckgränsen sjunker. Dock ökar även kornstorleken när sträckgränsen minskar, vilket är viktigt att tänka på när det kommer till sambandet mellan kornstorlek, tvillingar och sträckgräns.
Uberti, Megan E. "Exploring the material properties of small scale folded structures". Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/83750.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (page 21).
make robotics more readily available to the average person. Although designs for a number of successful printable robots have already been produced, there has been little formal exploration into the materials properties of these structures. Three point bending tests were performed on beams made of the materials and cross-sectional geometries of current designs to determine the bending stiffness of the printable beams currently found in printable robots, particularly the printable quad-rotor frame. As expected the composite acrylic and PEEK triangular beam had the highest bending stiffness El at 4.15 ± 1.67 N*m2. The lowest El was the triangular PEEK beam in its weak configuration at 0.02 ± 0.005 N*m2. 3D printed ABS beams had an unreliable result, with El in the range of 11.7 ± 8.05 N*m2. Overall our experimentally calculated values for El were generally consistent with the theoretically calculated values, providing useful information to inform future design choices and understanding the limitations of printable robot structures.
by Megan E. Uberti.
S.B.
HASSAN, INAMUL. "Effects of Austempering Process on Mechanical Behavior Properties of Compacted Graphite Iron". Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Material och tillverkning, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-45645.
Texto completoLibros sobre el tema "Mechanical properties of material"
W, Armstrong Ronald, ed. Deformable bodies and their material behavior. Hoboken, NJ: Wiley, 2004.
Buscar texto completoViens, Michael J. Mechanical properties of a porous mullite material. Greenbelt, Md: National Aeronautics and Space Administration, Goddard Space Flight Center, 1991.
Buscar texto completoErich, Tenckhoff y Vöhringer O, eds. Microstructure and mechanical properties of materials. Oberursel: DGM Informationsgesellschaft, 1991.
Buscar texto completoPrinciples of composite material mechanics. 2a ed. Boca Raton: Taylor & Francis, 2007.
Buscar texto completoPrinciples of composite material mechanics. New York: McGraw-Hill, 1994.
Buscar texto completoGibson, Ronald F. Principles of composite material mechanics. New York: McGraw-Hill, 1994.
Buscar texto completoPaajanen, Mika. The cellular polypropylene electret material: Electromechanical properties. Espoo [Finland]: Technical Research Centre of Finland, 2001.
Buscar texto completoPelleg, Joshua. Mechanical Properties of Materials. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-4342-7.
Texto completoPelleg, Joshua. Mechanical Properties of Materials. Dordrecht: Springer Netherlands, 2013.
Buscar texto completoTheo, Fett, ed. Ceramics: Mechanical properties, failure behaviour, materials selection. Berlin: Springer, 1999.
Buscar texto completoCapítulos de libros sobre el tema "Mechanical properties of material"
Lacroix, Damien y Josep A. Planell. "Mechanical Properties". En Biomedical Materials, 303–36. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49206-9_8.
Texto completoAnderson, J. C., K. D. Leaver, R. D. Rawlings y J. M. Alexander. "Mechanical Properties". En Materials Science, 181–244. Boston, MA: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4899-6826-5_9.
Texto completoWesolowski, Robert A., Anthony P. Wesolowski y Roumiana S. Petrova. "Mechanical Properties". En The World of Materials, 39–47. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-17847-5_6.
Texto completoDasari, Aravind, Zhong-Zhen Yu y Yiu-Wing Mai. "Mechanical Properties". En Engineering Materials and Processes, 133–60. London: Springer London, 2016. http://dx.doi.org/10.1007/978-1-4471-6809-6_6.
Texto completoWhite, Mary Anne. "Mechanical Properties". En Physical Properties of Materials, 397–446. Third edition. | Boca Raton : Taylor & Francis, CRC Press, 2019.: CRC Press, 2018. http://dx.doi.org/10.1201/9780429468261-19.
Texto completoGottstein, Günter. "Mechanical Properties". En Physical Foundations of Materials Science, 197–302. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-09291-0_7.
Texto completoWiederhorn, Sheldon, Richard Fields, Samuel Low, Gun-Woong Bahng, Alois Wehrstedt, Junhee Hahn, Yo Tomota et al. "Mechanical Properties". En Springer Handbook of Materials Measurement Methods, 283–397. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/978-3-540-30300-8_7.
Texto completoZhuravkov, Michael, Yongtao Lyu y Eduard Starovoitov. "Material and Solid Mechanical Characteristics (Properties)". En Mechanics of Solid Deformable Body, 51–62. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8410-5_3.
Texto completoPilato, Louis A. y Michael J. Michno. "Composite Mechanical Properties". En Advanced Composite Materials, 114–19. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-662-35356-1_6.
Texto completoPietrzyk, Maciej y John G. Lenard. "Material Properties and Interfacial Friction". En Thermal-Mechanical Modelling of the Flat Rolling Process, 9–52. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-84325-9_2.
Texto completoActas de conferencias sobre el tema "Mechanical properties of material"
"Mechanical Properties of Plain AAC Material". En SP-226: Autoclaved Aerated Concrete-Properties and Structural Design. American Concrete Institute, 2005. http://dx.doi.org/10.14359/14388.
Texto completoReed, Shad A., Anthony N. Palazotto y William Baker. "Determining Material Properties of Nonlinear Materials From Transient Response". En ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-43518.
Texto completoYun, Wang, Zhenying Xu, Huang Hui y Jianzhong Zhou. "Measurement of material mechanical properties in microforming". En 2nd international Symposium on Advanced Optical Manufacturing and Testing Technologies, editado por Li Yang, Shangming Wen, Yaolong Chen y Ernst-Bernhard Kley. SPIE, 2006. http://dx.doi.org/10.1117/12.674352.
Texto completoSagar, Amrit, Christopher Nehme, Anil Saigal y Thomas P. James. "Cryogenic Material Properties of Polycaprolactone". En ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10180.
Texto completoSavchenko, Nicolai D., T. N. Shchurova, M. L. Trunov, A. Kondrat y V. Onopko. "Deposition technique and external factors effect on Ge33As12Se55-Si heterostructure mechanical properties". En Material Science and Material Properties for Infrared Optoelectronics, editado por Fiodor F. Sizov y Vladimir V. Tetyorkin. SPIE, 1997. http://dx.doi.org/10.1117/12.280453.
Texto completoKolesnik, S. A. "Mechanical properties of polyethylene/Al2O3 nanoparticles composite material". En PROCEEDINGS OF THE III INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES IN MATERIALS SCIENCE, MECHANICAL AND AUTOMATION ENGINEERING: MIP: Engineering-III – 2021. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0071384.
Texto completoPtashchenko, Alexander A., Fedor A. Ptashchenko, Natalia V. Maslejeva y Galina V. Sadova. "Mechanical strain and degradation of laser heterostructures". En Fifth International Conference on Material Science and Material Properties for Infrared Optoelectronics, editado por Fiodor F. Sizov. SPIE, 2001. http://dx.doi.org/10.1117/12.417765.
Texto completoMuller, W. H., H. Worrack, J. Sterthaus, J. Wilden y J. Villain. "Determination of Mechanical Material Properties of Joining Materials, in particular Microelectronic Solders". En 2008 10th Electronics Packaging Technology Conference (EPTC). IEEE, 2008. http://dx.doi.org/10.1109/eptc.2008.4763495.
Texto completoLI, Yu-qian, Jia-yu WU, Hao-wei GU, Zong-yong CHEN, Xiao-bing SHI, Ting-mao LIAO, Cheng AN, Hong YUAN y Ren-huai LIU. "Mechanical Properties of Palm Fiber Mattress". En International Conference on Advanced Material Science and Engineeering (AMSE2016). WORLD SCIENTIFIC, 2016. http://dx.doi.org/10.1142/9789813141612_0013.
Texto completoHermanto, Bambang, Desty A. Pratiwi, Arif Tjahjono y Toto Sudiro. "Microstructure and mechanical properties of ferromanganese-silicon alloys". En INTERNATIONAL CONFERENCE ON TRENDS IN MATERIAL SCIENCE AND INVENTIVE MATERIALS: ICTMIM 2020. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0014699.
Texto completoInformes sobre el tema "Mechanical properties of material"
Hansen, F. D. y K. D. Mellegard. Physical and mechanical properties of degraded waste surrogate material. Office of Scientific and Technical Information (OSTI), marzo de 1998. http://dx.doi.org/10.2172/653935.
Texto completoLaHucik, Jeffrey y Jeffery Roesler. Material Constituents and Proportioning for Roller-Compacted Concrete Mechanical Properties. Illinois Center for Transportation, agosto de 2018. http://dx.doi.org/10.36501/0197-9191/18-016.
Texto completoSiegel, R. W. y G. E. Fougere. Mechanical properties of nanophase materials. Office of Scientific and Technical Information (OSTI), noviembre de 1993. http://dx.doi.org/10.2172/10110297.
Texto completoSolem, J. C. y J. K. Dienes. Mechanical Properties of Cellular Materials. Office of Scientific and Technical Information (OSTI), julio de 1999. http://dx.doi.org/10.2172/759178.
Texto completoTretiak, Sergei, Benjamin Tyler Nebgen, Justin Steven Smith, Nicholas Edward Lubbers y Andrey Lokhov. Machine Learning for Quantum Mechanical Materials Properties. Office of Scientific and Technical Information (OSTI), febrero de 2019. http://dx.doi.org/10.2172/1498000.
Texto completoHardy, Robert Douglas, David R. Bronowski, Moo Yul Lee y John H. Hofer. Mechanical properties of thermal protection system materials. Office of Scientific and Technical Information (OSTI), junio de 2005. http://dx.doi.org/10.2172/923159.
Texto completoWibowo, J., B. Amadei y S. Sture. Effect of roughness and material strength on the mechanical properties of fracture replicas. Office of Scientific and Technical Information (OSTI), agosto de 1995. http://dx.doi.org/10.2172/95493.
Texto completoNix, W. D. Mechanical properties of materials with nanometer scale microstructures. Office of Scientific and Technical Information (OSTI), julio de 1991. http://dx.doi.org/10.2172/5951104.
Texto completoWilliam D. Nix. Mechanical Properties of Materials with Nanometer Scale Microstructures. US: Stanford University, octubre de 2004. http://dx.doi.org/10.2172/833870.
Texto completoLong, Wendy, Zackery McClelland, Dylan Scott y C. Crane. State-of-practice on the mechanical properties of metals for armor-plating. Engineer Research and Development Center (U.S.), enero de 2023. http://dx.doi.org/10.21079/11681/46382.
Texto completo