Literatura académica sobre el tema "Material and Mechanical Characterization"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Material and Mechanical Characterization".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "Material and Mechanical Characterization"
Mohd Riza, Nor Syaheera, Nuryazmin Ahmat Zainuri, Mohd Zaki Nuawi, Noorhelyna Razali y Haliza Othman. "Pencirian Sifat Mekanikal Bahan dengan Pendekatan Analisis Fraktal". Jurnal Kejuruteraan si5, n.º 2 (30 de noviembre de 2022): 111–18. http://dx.doi.org/10.17576/jkukm-2022-si5(2)-12.
Texto completoVogel, J., H. J. Feige, J. Saupe, S. Schubert y J. Grimm. "Mechanical material characterization of photosensitive polymers". Microsystem Technologies 20, n.º 10-11 (15 de diciembre de 2013): 1975–79. http://dx.doi.org/10.1007/s00542-013-2028-0.
Texto completoBellelli, Alberto y Andrea Spaggiari. "Magneto-mechanical characterization of magnetorheological elastomers". Journal of Intelligent Material Systems and Structures 30, n.º 17 (8 de febrero de 2019): 2534–43. http://dx.doi.org/10.1177/1045389x19828828.
Texto completoRadosavljević, Goran, Nelu Blaž, Andrea Marić, W. Smetana y Ljiljana Živanov. "Mechanical, Electrical and Thermal Characterization of Commercially Available LTCC Dielectric Tapes". Key Engineering Materials 543 (marzo de 2013): 212–15. http://dx.doi.org/10.4028/www.scientific.net/kem.543.212.
Texto completoChen, Ke, Jiang Li Lin, Guang Fu Yin y Yi Zheng. "Shear Mechanical Properties Characterization of Material via Ultrasound Vibrometry". Advanced Materials Research 488-489 (marzo de 2012): 826–30. http://dx.doi.org/10.4028/www.scientific.net/amr.488-489.826.
Texto completoLau, Hang Kuen. "Battery Materials Characterization Workflow for Effective Battery Electrode Manufacturing Processes". ECS Meeting Abstracts MA2022-02, n.º 6 (9 de octubre de 2022): 590. http://dx.doi.org/10.1149/ma2022-026590mtgabs.
Texto completoLindskog, Per, Daniel C. Andersson y Per-Lennart Larsson. "An Experimental Device for Material Characterization of Powder Materials". Journal of Testing and Evaluation 41, n.º 3 (27 de marzo de 2013): 20120107. http://dx.doi.org/10.1520/jte20120107.
Texto completoGohil, Piyush P. y A. A. Shaikh. "Cotton-Epoxy Composites: Development and Mechanical Characterization". Key Engineering Materials 471-472 (febrero de 2011): 291–96. http://dx.doi.org/10.4028/www.scientific.net/kem.471-472.291.
Texto completoLamberti, Luciano. "Advances in Multi-Scale Mechanical Characterization of Materials with Optical Methods". Materials 14, n.º 23 (28 de noviembre de 2021): 7282. http://dx.doi.org/10.3390/ma14237282.
Texto completoNěmeček, Jiří y Vlastimil Kralik. "Local Mechanical Characterization of Metal Foams by Nanoindentation". Key Engineering Materials 662 (septiembre de 2015): 59–62. http://dx.doi.org/10.4028/www.scientific.net/kem.662.59.
Texto completoTesis sobre el tema "Material and Mechanical Characterization"
Dixon, Larie Alecia Brandy. "Material characterization of lithium ion batteries for crash safety". Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/100106.
Texto completoThesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 113-114).
The safety of lithium-ion batteries is extremely important due to their widespread use in consumer products such as laptops and cell phones. Several cases of thermal runaway in lithium ion batteries that resulted in fires have been reported recently. And in the case of vehicle batteries, deformation during a crash event could cause an internal short circuit, leading to thermal runaway, fires, or toxic gas release. While much is understood about lithium-ion batteries, no comprehensive computational models exist to test and optimize these batteries before manufacture. The objective of this research was to characterize the mechanical properties of three types of lithium-ion batteries through cell and interior component mechanical testing. Prismatic, elliptic, and pouch cells were tested using hemispherical punches to obtain load-displacement curves. Elliptic and pouch cells were also compression tested. Uniaxial, biaxial, and compression tests were performed on the interior components of elliptic and pouch cells. The test results were then used by Impact and Crashworthiness Laboratory team members to create, validate, and refine computational models. This research resulted in many conclusions involving the lithium-ion cells, their interior components, and efforts to model the failure of cells. At the cell level, the effect of liquid presence, strain rate, separator type, and test location was studied. The level of experience in sample preparation and testing methods was an important result for interior component material characterization, as was the varied force-displacement results for different cell types. But most importantly, this work demonstrated that the material characterization of lithium-ion battery cells through mechanical testing could be used to create, calibrate, and validate cell numerical simulation models.
by Larie Alecia Brandy Dixon.
Nav. E.
S.M.
Webster, Matthew R. "Material Characterization of Insect Tracheal Tubes". Diss., Virginia Tech, 2015. http://hdl.handle.net/10919/71708.
Texto completoPh. D.
Marth, Stefan. "Material Characterization for Modelling of Sheet Metal Deformation and Failure". Licentiate thesis, Luleå tekniska universitet, Material- och solidmekanik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-62477.
Texto completoAthale, Madhura Athale. "Elastodynamic Characterization of Material Interfaces Using Spring Models". The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1503262542890538.
Texto completoSnider, James M. "Zinc pot bearing material wear and corrosion characterization". Morgantown, W. Va. : [West Virginia University Libraries], 2004. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=3716.
Texto completoTitle from document title page. Document formatted into pages; contains xx, 272 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 207-208).
Studebaker, Seth. "Material modeling and sensor characterization for optimizing footpad force sensing array". Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/112542.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (page 54).
with the ultimate goal of assisting the elderly and disabled with fall prevention and mitigation as well as providing athletes with critical data for training. The force sensing footpad, originally developed for use on the MIT Cheetah robot, integrates lightweight pressure sensors and a urethane rubber, Smooth-On's Vytaflex@ 20, to sense force in both the normal and shear directions. In previous work, cylindrical footpads with a single pressure sensor of differing heights and diameters were tested by applying displacements to the material. The experimental force and voltage from the pressure sensor were recorded. The thesis aims to provide a Finite Element Analysis (FEA) model in Abaqus that accurately simulates and models the footpad sensors and is validated by the physical experimental results. While previous work had been done to model and simulate the footpad using FEA, little was known about the properties of the Vytaflex@ material and a Neo-Hookean model based on coefficients for a silicone rubber was used to model the footpad. In order to provide accurate simulations, the thesis seeks to determine the best hyperelastic constitutive model to describe the material. Uniaxial tensile, uniaxial compression, planar tension, and volumetric compression tests were performed to determine the hyperelastic material model of the rubber. The Odgen n=2 material model was determined to be the best fit for the data and was used to describe the material properties in the Abaqus simulations. Abaqus models were created to represent the various cylindrical footpads and simulations were run using Abaqus's dynamic explicit analysis. Stress data from the simulation results was then converted to a voltage using an effective sensitivity and intercept adjustment factor. The effective sensitivity and intercept adjustment factor were adjusted until the simulation results matched that of the experiments. Using these constants, the stresses inside the footpad can now be determined from the voltage readings of the pressure sensor.
by Seth Studebaker.
S.B.
Meier, Joseph D. (Joseph David). "Material characterization of high-voltage lithium-ion battery models for crashworthiness analysis". Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/81586.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (p. 59-60).
A three-phased study of the material properties and post-impact behavior of prismatic pouch lithium-ion battery cells was conducted to refine computational finite element models and explore the mechanisms of thermal runaway caused by internal short circuit. In phase one, medium and large sized cells at low state of charge (SOC) were impacted or compressed while measuring punch load, displacement, cell voltage, and surface temperature until an internal short circuit was detected, followed by a rise in surface temperature. Results were used to either refine the constitutive cell properties or validate finite element models. In phase two, an exploratory study into the behavior of lithium-ion prismatic pouch battery cells following surface impacts with hemispherical and conical punches (abuse testing) was conducted for the purpose of observing pouch behavior and adequacy of parameter measurement methods. Cells were impacted by steel punches to loads as high as 500 kN while recording punch load, displacement, and pouch surface temperatures, as well as normal and high-speed video footage. Comparisons of load, surface temperature, and thermal runaway for various states of charge and punch types are presented. In the third and final phase of the study, material characterization of cell components was conducted to further refine computational models and draw conclusions regarding the interactions between impacted cell layers and the physical cause of internal short circuits. Results of uniaxial tension tests for coated and uncoated anode and cathode layers, as well as separator layers are presented, as well as conclusions about the use of digital image correlation (DIC) software in such studies. Much of the data generated was used to further refine and validate prismatic pouch lithium-ion battery cell computational models developed by the MIT Impact and Crashworthiness Laboratory. Physical tests conducted in phase one of this study were compared to model simulations, which showed that the models make close approximations for material displacement, and are good predictors of internal short circuit.
by Joseph D. Meier.
Nav.E.and S.M.
Souto, Nelson Mineiro. "Computational design of a mechanical test for material characterization by inverse analysis". Doctoral thesis, Universidade de Aveiro, 2015. http://hdl.handle.net/10773/15168.
Texto completoWith the development of full-field measurements methods, recent material parameters identification strategies call upon the use of heterogeneous tests. The inhomogeneous strain fields developed during these tests lead to a more complete mechanical characterization of the sheet metals, allowing the substantial reduction of the number of tests in the experimental database needed for material parameters identification purposes. In the present work, an innovative design optimization process for the development of heterogeneous tests is presented. The main goal is the design of a mechanical test able to characterize the material behavior of thin metallic sheets under several stress and strain paths and amplitudes. To achieve this aim, the study was carried out with a virtual material, though derived from experimental data. An indicator of the mechanical interest of the test was proposed, and was used in an optimization procedure to design both the boundary conditions and the sample shape. On the one hand, the virtual behavior of a mild steel was characterized using a complex phenomenological model composed by the Yld2004-18p anisotropic yield criterion combined with a mixed isotropic-kinematic hardening law and a macroscopic rupture criterion. An efficient material parameters identification process based on finite element model updating type was implemented and the identified parameters set was validated by performing a deep drawing test leading either to full drawing or rupture of the blank. On the other hand, an indicator which rates the strain field of the experiment by quantifying the mechanical information of the test was formulated. The relevance of the indicator was stressed out by the numerical analysis of already known classical as well as heterogeneous tests and the results obtained were validated by a material parameter sensitivity study. Two different optimization approaches were used for designing the heterogeneous test, namely (i) a one-step procedure designing both specimen shape and loading path by using a tool and (ii) a sequential incremental technique designing the specimen shape and the loading path of the specimen considering local displacements. The results obtained revealed that the optimization approach proposed was very promising for designing a single experiment able to fully characterize the several strain paths and amplitudes encountered in sheet metal forming processes.
Devido ao desenvolvimento de métodos de medição global, recentes estratégias de identificação de parâmetros de material baseiam-se na informação obtida em testes mecânicos heterogéneos. Os campos de deformação desenvolvidos por estes testes permitem uma melhor caracterização mecânica de chapas metálicas, o que possibilita reduzir consideravelmente o número de testes mecânicos necessários num processo de identificação de parâmetros de modelos constitutivos complexos. No presente trabalho, uma metodologia de design recorrendo a optimização para desenvolver testes mecânicos heterógenos é apresentada. O seu principal objectivo consistiu na concepção de um teste mecânico capaz de caracterizar o comportamento mecânico de chapas metálicas para vários estados de tensão e deformação. Para isso, este estudo foi realizado considerando um material virtual obtido a partir de dados experimentais. Além disso, um indicador capaz de caracterizar testes mecânicos foi proposto para ser posteriormente utilizado na metodologia de optimização. Por um lado, o comportamento virtual de um aço macio foi caracterizado através de um modelo fenomenológico complexo composto pelo critério de plasticidade anisotrópico Yld2004-18p, combinado com uma lei de encruamento mista e com um critério macroscópico de ruptura. Para esta caracterização mecânica, um processo eficiente de identificação de parâmetros foi desenvolvido e o conjunto de parâmetros identificado foi validado comparando resultados experimentais e numéricos do processo de embutidura de um copo cilíndrico. Por outro lado, um indicador quantitativo para avaliar a informação do campo de deformação de testes mecânicos foi formulado e a sua performance foi avaliada através da análise numérica tanto de testes mecânicos clássicos como de testes heterogéneos. Relativamente à metodologia de optimização, duas abordagens diferentes foram consideradas para a concepção do teste mecânico heterógeno. A primeira abordagem consistiu num procedimento de etapa única projectando a forma do provete e o carregamento através da utilização de uma ferramenta. A segunda abordagem consistiu numa técnica incremental de varias etapas projectando a forma do provete e o caminho de deformação através da aplicação de carregamento por deslocamentos locais. Os resultados obtidos revelaram que a metodologia de optimização proposta permite a concepção de testes mecânicos capazes de caracterizar toda a gama de estados de deformação e níveis de deformação normalmente observados nos processos de conformação de chapas metálicas.
Grâce au développement des méthodes de mesure de champs, de nouvelles stratégies d’identification de paramètres matériau de lois de comportement mécanique sont proposées, fondées sur l’utilisation d’essais mécaniques hétérogènes. Les champs de déformation hétérogènes développés au cours de ces essais permettent une meilleure caractérisation du comportement mécanique des tôles métalliques et, par conséquent, de réduire considérablement le nombre d’essais nécessaires pour identifier les paramètres matériau de modèles phénoménologiques complexes. Mais comment concevoir ces essais? Dans ce travail, une méthodologie d’optimisation pour le développement d’essais mécaniques hétérogènes est présentée. L’objectif principal est la conception, par analyse inverse et en proposant un indicateur représentatif des états de déformation, d’un essai capable de caractériser le comportement mécanique des tôles métalliques pour plusieurs états de contrainte et déformation. Pour cela, cette étude a été réalisée en considérant un matériau virtuel (acier doux sous forme de tôle mince), obtenu à partir de données expérimentales. En outre, un indicateur qui caractérise les essais mécaniques a été proposé pour être utilisé dans la méthodologie d’optimisation. D’un côté, le comportement mécanique de l’acier doux a été représenté avec un modèle phénoménologique complexe composé du critère anisotrope de plasticité Yld2004-18p, combiné à une loi d’écrouissage mixte et un critère macroscopique de rupture. Pour cette loi de comportement, un procédé d’identification des paramètres du matériau a été développé et le jeu de paramètres identifiés a été validé en comparant des résultats expérimentaux et numériques de l’emboutissage d’un godet cylindrique. D’un autre côté, un indicateur quantitatif pour évaluer l’information du champ de déformation des essais mécaniques a été formulé et sa pertinence a été évaluée à travers l’analyse numérique d’essais classiques et hétérogènes de la littérature. Concernant la méthodologie d’optimisation, deux approches différentes ont été considérées pour la conception de l’essai mécanique hétérogène. La première approche est fondée sur une procédure en une seule étape, où l’optimisation de la forme de l’éprouvette et des conditions aux limites, imposées par un outil, a été effectuée. La seconde approche est fondée sur une technique incrémentale en plusieurs étapes, en optimisant la forme de l’éprouvette et le chemin de déformation, par l’application des déplacements locaux. Les résultats obtenus sont comparés et un essai est retenu pour identifier les paramètres matériau, en utilisant le matériau virtuel comme référence, afin d’illustrer la pertinence de la démarche.
Hemmasizadeh, Ali. "Characterization of Heterogeneous Material Properties of Aorta Using Nanoindentation". Diss., Temple University Libraries, 2013. http://cdm16002.contentdm.oclc.org/cdm/ref/collection/p245801coll10/id/240046.
Texto completoPh.D.
Arterial mechanical properties have received increasing attention in the past few decades due to their vast effect on predicting cardiovascular diseases and injuries. The heterogeneity of thoracic aortic tissue was characterized in terms of viscoelastic material properties and correlations were obtained between these properties and tissue morphology. Additionally, the effect of material preservation on the material properties was determined. Changes in the mechanical properties of porcine thoracic aorta wall in the radial direction were characterized using a quasi-linear viscoelastic modeling of nanoindentaiton tests. Two layers of equal thickness were mechanically distinguishable in descending aorta based on the radial variations in the instantaneous Young's modulus E and reduced relaxation function G(t). Overall, comparison of E and Ginf of the outer half (70.27±2.47 kPa and 0.35±0.01) versus the inner half (60.32±1.65 kPa and 0.33±0.01) revealed that the outer half was stiffer and showed less relaxation. The results were used to explain local mechanisms of deformation, force transmission, tear propagation and failure in arteries. A multimodal and multidisciplinary approach was adopted to characterize the transmural morphological properties of aorta. The utilized methods included histology and multi-photon microscopy for describing the wall micro-architecture in the circumferential-radial plane, and Fourier-Transform infrared imaging spectroscopy for determining structural protein, and total protein content. The distributions of these quantified properties across the wall thickness of the porcine descending thoracic aorta were characterized and their relationship with the mechanical properties was determined. It was revealed that there is an increasing trend in mechanical stiffness, Elastic lamella Density (ELD), Structural Protein (SPR), Total Protein (TPR), and Elastin and Collagen Circumferential Percentage (ECP and CCP) from inner layers toward the outer ones. Finally two larger regions with equal thickness (inner and outer halves) were determined based on cluster analysis results of ELD which were in agreement with the cluster analysis of instantaneous Young's modulus. Changes to the local viscoelastic properties of fresh porcine thoracic aorta wall due to three common storage temperatures (+4 oC, -20 oC and -80 oC) within 24 hours, 48 hours, 1 week and 3 weeks were characterized. The changes to both elastic and relaxation behaviors were investigated considering the multilayer, heterogeneous nature of the aortic wall. For +4 oC storage samples, the average instantaneous Young's modulus (E) decreased while their permanent average relaxation amplitude (Ginf) increased and after 48 hours these changes became significant (10%, 13% for E, Ginf respectively). Generally, in freezer storage, E increased and Ginf showed no significant change. In prolonged preservation (> 1 week), the results of +20 oC storage showed significant increase in E (20% after 3 weeks) while this increase for -80 oC was not significant, making it a better choice for tissue cold storage applications. Results from this dissertation present a substantial step toward the anatomical characterization of the aortic wall building blocks and establishing a foundation for understanding the role of microstructural components on the functionality of blood vessels. A better understanding of these relationships would provide novel therapeutic targets and strategies for the prevention of human vascular disease.
Temple University--Theses
Rastgar, Agah Mobin. "Material Characterization of Aortic Tissue for Traumatic Injury and Buckling". Diss., Temple University Libraries, 2015. http://cdm16002.contentdm.oclc.org/cdm/ref/collection/p245801coll10/id/324268.
Texto completoPh.D.
While traumatic aortic injury (TAI) and rupture (TAR) continue to be a major cause of morbidity and mortality in motor vehicle accidents, its underlying mechanisms are still not well understood. Different mechanisms such as increase in intraluminal pressure, relative movement of aorta with respect to mediastinal structures, direct impact to bony structures have been proposed as contributing factors to TAI/TAR. At the tissue level, TAI is assumed to be the result of a complex state of supra-physiological, high rate, and multi-axial loading. A major step to gain insight into the mechanisms of TAI is a characterization of the aortic tissue mechanical and failure properties under loading conditions that resemble traumatic events. While the mechanical behavior of arteries in physiological conditions have been investigated by many researchers, this dissertation was motivated by the scarcity of reported data on supra-physiological and high rate loading conditions of aorta. Material properties of the porcine aortic tissue were characterized and a Fung-type constitutive model was developed based on ex-vivo inflation-extension of aortic segments with intraluminal pressures covering a range from physiological to supra-physiological (70 kPa). The convexity of the material constitutive model was preserved to ensure numerical stability. The increase in ë_è from physiological pressure (13 kPa) to 70 kPa was 13% at the outer wall and 22% at the inner wall while in this pressure range, the longitudinal stretch ratio ë_z increased 20%. A significant nonlinearity in the material behavior was observed as in the same pressure range, the circumferential and longitudinal Cauchy stresses at the inner wall were increased 16 and 18 times respectively. The effect of strain-rate on the mechanical behavior and failure properties of the tissue was characterized using uniaxial extension experiments in circumferential and longitudinal directions at nominal strain rates of 0.3, 3, 30 and 400 s-1. Two distinct states of failure initiation (FI) and ultimate tensile strength (UTS) were identified at both directions. Explicit direct relationships were derived between FI and UTS stresses and strain rate. On the other hand, FI and UTS strains were rate independent and therefore strain was proposed as the main mechanism of failure. On average, engineering strain at FI was 0.85±0.03 for circumferential direction and 0.58±0.02 for longitudinal direction. The engineering strain at UTS was not different between the two directions and reached 0.89±0.03 on average. Tissue pre-failure linear moduli showed an average of 60% increase over the range of strain rates. Using the developed material model, mechanical stability of aorta was studied by varying the loading parameters for two boundary conditions, namely pinned-pinned boundary condition (PPBC) and clamped-clamped boundary condition (CCBC). The critical pressure for CCBC was three times higher than PPBC. It was shown that the relatively free segment of aorta at the isthmus region may become unstable before reaching the peak intraluminal pressures that occur during a trauma. The mechanical instability mechanism was proposed as a contributing factor to TAI, where elevations in tissue stresses and strains due to buckling may increase the risk of injury.
Temple University--Theses
Libros sobre el tema "Material and Mechanical Characterization"
E, Totten George y Liang Hong, eds. Mechanical tribology: Materials, characterization, and applications. New York: Marcel Dekker, 2004.
Buscar texto completoA, Glaeser William, ed. Characterization of tribological materials. Boston: Butterworth-Heinemann, 1993.
Buscar texto completoChevalier, Yvon y Jean Tuong Vinh, eds. Mechanical Characterization of Materials and Wave Dispersion. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118621264.
Texto completoJordan, T. L. Piezoelectric ceramics characterization. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 2001.
Buscar texto completoFrançois, Dominique. Mechanical Behaviour of Materials: Volume II: Fracture Mechanics and Damage. 2a ed. Dordrecht: Springer Netherlands, 2013.
Buscar texto completoAntonio, Brian Kent. Material and mechanical characterizations for braided composite pressure vessels. Springfield, Va: Available from the National Technical Information Service, 1990.
Buscar texto completoPelleg, Joshua. Mechanical Properties of Materials. Dordrecht: Springer Netherlands, 2013.
Buscar texto completoW, Fritz H. y Eustacchio E, eds. Mechanical tests for bitumious mixes: Characterization, design and quality control. London: Chapman and Hall, 1990.
Buscar texto completoInternational Union of Testing and Research Laboratories for Materials and Structures. International Symposium. Mechanical tests for bituminous mixes: Characterization, design, and quality control. London: Chapman and Hall, 1990.
Buscar texto completoMechanical characterization of materials and wave dispersion: Instrumentation and experiment interpretation. London, U.K: ISTE, 2010.
Buscar texto completoCapítulos de libros sobre el tema "Material and Mechanical Characterization"
Nielsen, C. V., W. Zhang, L. M. Alves, N. Bay y P. A. F. Martins. "Material, Friction and Contact Characterization". En Modeling of Thermo-Electro-Mechanical Manufacturing Processes, 79–87. London: Springer London, 2012. http://dx.doi.org/10.1007/978-1-4471-4643-8_7.
Texto completoErnst, Leo J. "Polymer Material Characterization and Modeling". En Benefiting from Thermal and Mechanical Simulation in Micro-Electronics, 37–58. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4757-3159-0_4.
Texto completoAmaya, M., J. M. Romero, L. Martinez y R. Pérez. "Mechanical Properties of Spray-Atomized FeAl40 at.%Al Alloys". En Materials Characterization, 199–207. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-15204-2_20.
Texto completoVinh, Jean Tuong. "Review of Industrial Analyzers for Material Characterization". En Mechanical Characterization of Materials and Wave Dispersion, 13–24. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118621264.ch2.
Texto completoSchneider, Eckhardt y Christian Boller. "Ultrasonic Material Characterization and Testing of Anisotropic Components". En Lecture Notes in Mechanical Engineering, 5–6. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-1771-1_2.
Texto completoAksoy, Hüseyin Gökmen. "Wideband Material Characterization of Viscoelastic Materials". En Conference Proceedings of the Society for Experimental Mechanics Series, 117–23. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-21762-8_14.
Texto completoLeBlanc, James, Susan Bartyczak y Lauren Edgerton. "Mechanical Characterization and Numerical Material Modeling of Polyurea". En Dynamic Behavior of Materials, Volume 1, 105–7. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95089-1_17.
Texto completoPindera, Jerzy Tadeusz. "Review of Material Characterization". En Solid Mechanics and Its Applications, 54–108. Dordrecht: Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-015-9359-5_4.
Texto completoGupta, Nitin Kumar, Pankaj Pandey, Samarth Mehta, Shilpi Swati, Shubham Kumar Mishra y Kevin Jose Tom. "Characterization of ABS Material in Hybrid Composites: A Review". En Lecture Notes in Mechanical Engineering, 619–30. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6469-3_57.
Texto completoTobalina, D., F. Sanz-Adan, R. Lostado-Lorza, M. Martínez-Calvo, J. Santamaría-Peña, I. Sanz-Peña y F. Somovilla-Gómez. "Characterization of a Composite Material Reinforced with Vulcanized Rubber". En Lecture Notes in Mechanical Engineering, 1073–82. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-45781-9_107.
Texto completoActas de conferencias sobre el tema "Material and Mechanical Characterization"
Boehme, Bjoern, K. M. B. Jansen, Sven Rzepka y Klaus-Juergen Wolter. "Comprehensive material characterization of organic packaging materials". En 2009 10th International Conferene on Thermal, Mechanical and Multi-Physics simulation and Experiments in Microelectronics and Microsystems (EuroSimE). IEEE, 2009. http://dx.doi.org/10.1109/esime.2009.4938431.
Texto completoFoltynski, Jacek, Jason Franqui, Andriy Vasiyschouk, Ruslan Mudryy y Kenneth Blecker. "Material Characterization of Phase Change Materials for Munitions Safety Applications". En ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-94225.
Texto completoSantare, Michael H., Wenzhong Tang, John E. Novotny y Suresh G. Advani. "Mechanical Characterization of a Nanotube-Polyethylene Composite Material". En ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-43351.
Texto completoSmith, Michael P., Paul V. Cavallaro, Jacob D. O’Donnell, Eric A. Warner, Nicholas A. Valm y Nick Gencarelle. "Mechanical Characterization of Thermally Insulated Composites". En ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-95165.
Texto completoThota, Jagadeep, Mohammed Saadeh, Mohamed B. Trabia, Brendan O’Toole, Chang-Hyun Lee, Kwan-Je Woo, Hong-Lae Park, Kang-Wun Lee, Man-Hoi Koo y Kyoung-Hoon Lee. "Material Characterization of Rubberized Aramid for Shock Mitigation". En ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88437.
Texto completo"Chapter 13, Material characterization and modeling". En Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems - EuroSimE 2004. IEEE, 2004. http://dx.doi.org/10.1109/esime.2004.1338197.
Texto completoPoh, Edith S. W., W. H. Zhu, X. R. Zhang, C. K. Wang, Anthony Y. S. Sun y H. B. Tan. "Lead-free solder material characterization for thermo-mechanical modeling". En Multi-Physics simulation and Experiments in Microelectronics. IEEE, 2008. http://dx.doi.org/10.1109/esime.2008.4525046.
Texto completoLu, Yongjin y Rui Lin. "Mechanical Behavior and Characterization of Stern-shaft Mechanical Sealing Device". En 3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015). Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/ic3me-15.2015.10.
Texto completoQuapp, Krista M. y Jeffrey A. Weiss. "A Material Characterization of Human Medial Collateral Ligament". En ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0293.
Texto completoChen, Yu, Andrew B. Kahng, Gabriel Robins y Alexander Zelikovsky. "Monte-Carlo methods for chemical-mechanical planarization on multiple-layer and dual-material models". En Design, Process Integration, and Characterization for Microelectronics, editado por Alexander Starikov y Kenneth W. Tobin, Jr. SPIE, 2002. http://dx.doi.org/10.1117/12.475677.
Texto completoInformes sobre el tema "Material and Mechanical Characterization"
Barnes, Eftihia, Jennifer Jefcoat, Erik Alberts, Hannah Peel, L. Mimum, J, Buchanan, Xin Guan et al. Synthesis and characterization of biological nanomaterial/poly(vinylidene fluoride) composites. Engineer Research and Development Center (U.S.), septiembre de 2021. http://dx.doi.org/10.21079/11681/42132.
Texto completoScott, Dylan, Steven Graham, Bradford Songer, Brian Green, Michael Grotke y Tony Brogdon. Laboratory characterization of Cor-Tuf Baseline and UHPC-S. Engineer Research and Development Center (U.S.), marzo de 2021. http://dx.doi.org/10.21079/11681/40121.
Texto completoWesterman, R. E., J. H. Haberman, S. G. Pitman, B. A. Pulsipher y L. A. Sigalla. Corrosion and environmental-mechanical characterization of iron-base nuclear waste package structural barrier materials. Annual report, FY 1984. Office of Scientific and Technical Information (OSTI), marzo de 1986. http://dx.doi.org/10.2172/5851243.
Texto completoSnyder, Victor A., Dani Or, Amos Hadas y S. Assouline. Characterization of Post-Tillage Soil Fragmentation and Rejoining Affecting Soil Pore Space Evolution and Transport Properties. United States Department of Agriculture, abril de 2002. http://dx.doi.org/10.32747/2002.7580670.bard.
Texto completoMinnicino, Michael, David Gray y Paul Moy. Aluminum Alloy 7068 Mechanical Characterization. Fort Belvoir, VA: Defense Technical Information Center, agosto de 2009. http://dx.doi.org/10.21236/ada506416.
Texto completoLeung, C. Acetylene Terminated Resin Mechanical Characterization. Fort Belvoir, VA: Defense Technical Information Center, mayo de 1986. http://dx.doi.org/10.21236/ada172623.
Texto completoGIBSON, M. W. Material stabilization characterization management plan. Office of Scientific and Technical Information (OSTI), agosto de 1999. http://dx.doi.org/10.2172/797727.
Texto completoBannochie, C. J. Plutonium Immobilization Material Characterization: Milestone 1 Report - Initiate Design of Prototype Material Characterization System. Office of Scientific and Technical Information (OSTI), junio de 1999. http://dx.doi.org/10.2172/793847.
Texto completoFried, Eliot y Morton E. Gurtin. Continuum mechanical and computational aspects of material behavior. Office of Scientific and Technical Information (OSTI), febrero de 2000. http://dx.doi.org/10.2172/811358.
Texto completoFried, Eliot. Continuum Mechanical and Computational Aspects of Material Behavior. Office of Scientific and Technical Information (OSTI), febrero de 2015. http://dx.doi.org/10.2172/1325887.
Texto completo