Tesis: "Management Control System"

1

Rozenes, Shai. "Multidimensional project control system". Thesis, Coventry University, 2004. http://curve.coventry.ac.uk/open/items/462120e8-7a38-a662-149a-8d8320ba4cf4/1.

Texto completo

Resumen

Project control systems often fail to support management in achieving their global project goals. This thesis proposes a Multidimensional Project Control System (MPCS) as an approach for quantifying deviations from the planning phase to the execution phase with respect to the global project control specification (GPCS). The projects' current state must be translated into yield terms, which are expressed as a gap vector that represents the multidimensional deviation from the global project control specification. The MPCS methodology allows the project manager to determine: integrated project status; where problems exist in the project; when and where to take corrective action; and how to measure improvement. However, implementing the MPCS methodology does not require extra data collation. MPCS deals with the control of a single project and defines the project performances in comparison with the plan. The progression of several projects in parallel is a common situation in organizations, therefore a comparison of the various project performances is required. It is proposed that a comparison process be performed using the data envelope analysis (DEA) approach. The reference points for examining the performances of different projects and the directions of improvement for the projects are not necessarily found on the efficiency frontier. An algorithm is developed for applying multi-project system control having a relatively large number of inputs and outputs while maintaining the validity of the DEA methodology. The DEA output allows the diagnosis of those found on the efficiency frontier and those that need improvement.

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Anand, Rahul. "Lean Project Control and Management System". Thesis, Purdue University, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10600937.

Texto completo

Resumen

Information is power; when we know something, it is hard to ignore. The foundation of this thesis is to create awareness about the inadequacy of the existing project control and management system (PCMS). There is a need for rapid improvements in PCMS, and proposed actual improvements in PCMS are put forward here. Patty and Denton said, “If there is anything to be learned from the history of work-process innovation, it is that any system of principles and methods will experience a life cycle. In other words, as processes mature, innovation is required to facilitate survival, let alone growth in sales of any product or service” (Patty and Denton 2010). The PCMS for capital project delivery in the engineering procurement construction (EPC) industry is in the same situation; it has completed its cycle and is in need of innovation. This thesis describes: “What Is”, the current state of Project Control and Management System (PCMS); “What Should Be”, the practices of PCMS: and “How to Close the Gap”. The advancements in PCMS are based on concepts which are process derived from Lean concepts and principles already applied in other industries such as manufacturing, aerospace, and ship building, where they have exhibited tremendous benefits. A new classification of PCMS is explained based on its characteristics and objectives. Two models are proposed to enhance the PCMS and make it a Lean PCMS. A “Real Time Visual Control Flow System Model” is proposed to enhance the existing flow system beyond advanced work packaging and the last planner system, by incorporating aligned breakdown structure, pull planning and control, real-time control, visual control, critical chain project management, making and keeping commitments. Our “Lean PCMS” model is proposed to enhance the whole system of PCMS and achieve the desired state of excellence for PCMS. The intention of this research is to make the current PCMS a Lean PCMS and to shift the reactive approach of project controls to a more proactive approach. A case study, “How to Close the Gap”, using Kaizen methodology (only the Kaizen appraisal stage, in real settings) in a large EPC (Engineering, Procurement, and Construction) company, is described.

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Новоселов, С. П. y О. В. Сичова. "Intelligent Lighting Control and Management System". Thesis, NURE, MC&FPGA, 2019. https://mcfpga.nure.ua/conf/2019-mcfpga/10-35598-mcfpga-2019-009.

Texto completo

Resumen

This paper discusses the features of building an automated lighting control system. The architecture of the automated system is given. The block diagram is considered and its components are described. The principle of interaction of intelligent devices with the server is given. Presented the rationale and benefits from the introduction of such a system.

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Chiriseri, Valerie Edith. "RHINO ARM cluster control management system". Thesis, University of Cape Town, 2014. http://hdl.handle.net/11427/22631.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Barger, Anthony A. y William B. Zabicki. "Social responsibility as a management control system". Monterey California. Naval Postgraduate School, 2004. http://hdl.handle.net/10945/9923.

Texto completo

Resumen

Approved for public release; distribution is unlimited
MBA Professional Report
Approved for public release; distribution is unlimited
In this thesis, we examine how businesses with social responsibility as part of their core strategy use related management control systems within Harvard Business School Professor Robert Simons' business strategy control model. The model explains the interaction of four control levers (Beliefs Systems, Boundary Systems, Interactive Control Systems, and Diagnostic Control Systems) to balance business strategy. We examine how management control systems for social responsibility apply to each control lever both in theory and through the application of case examples. Finally we overlay the model from corporate America onto the Naval Postgraduate School to examine where socially responsible management control systems operate to control and adjust the overall socially responsible strategies.

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Brose, Gerald. "Access control management in distributed object systems". [S.l. : s.n.], 2001. http://www.diss.fu-berlin.de/2001/203/index.html.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Horan, Stephen. "Using Labview to Design a Payload Control System". International Foundation for Telemetering, 2008. http://hdl.handle.net/10150/606179.

Texto completo

Resumen

ITC/USA 2008 Conference Proceedings / The Forty-Fourth Annual International Telemetering Conference and Technical Exhibition / October 27-30, 2008 / Town and Country Resort & Convention Center, San Diego, California
As part of a project to develop small satellites, we have developed a combined ground station and flight computer control software package using LabVIEW. These computer systems are used to acquire data from sensors, control communications links, provide automatic data acquisition capabilities, and provide a user interface. In this paper, we will look at the state machines that describe both sets of software, the challenges for the flight computer development given the PC/104 format, and show how the final product was deployed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Khan, Sheroz. "Coordinated protection and control in power systems : an expert system approach to interlocking management". Thesis, University of Strathclyde, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.338913.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Peck, Nathan J. "PEAK POWER CONTROL WITH AN ENERGY MANAGEMENT SYSTEM". Monterey, California. Naval Postgraduate School, 2013. http://hdl.handle.net/10945/32884.

Texto completo

Resumen

The Department of Defense (DoD) is researching methods to enhance energy security and reduce energy costs. The energy security of DoD installations relies on the commercial electricity grid. One method being considered to improve energy security and reduce energy costs is microgrids that include combinations of energy storage, energy sources, critical loads, and non-critical loads. A microgrids power demand and the benefits of a microgrid integrated with a power electronics enabled Energy Management System (EMS) is investigated in this thesis. The power demand of a single family household is analyzed. The peak power demand of the single family household displays the drawbacks of peak power demand on the commercial electricity grid and the installations receiving power from it. Drawbacks include reduced energy security due to blackouts and increased cost as a result of meeting the peak demand. One benefit of an EMS is its ability to island or continue supplying power to critical loads when the commercial electricity grid is lost. A second benefit is reduced power demand on the commercial electricity grid during peak power demand or on distributed resources (DR) while islanded by performing peak power control. The performance of peak power control by an EMS is demonstrated using a Simulink model and an experimental laboratory setup. The Simulink model and EMS functionality are validated with the laboratory experiments. The Simulink model is then used to demonstrate the reduction in peak power demand on the commercial electricity grid using an EMS on more complex loads such as motors and diode rectifiers. The Simulink model is also used to compare the power demand on the commercial electricity grid with and without the EMS.

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Rezaee, Arman. "Towards a cognitive network management and control system". Thesis, Massachusetts Institute of Technology, 2020. https://hdl.handle.net/1721.1/128329.

Texto completo

Resumen

Thesis: Ph. D., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2020
Cataloged from PDF of thesis.
Includes bibliographical references (pages 155-159).
Future networks have to accommodate an increase of 3-4 orders of magnitude in data rates with heterogeneous session sizes and strict time deadline requirements. The dynamic nature of scheduling of large transactions and the need for rapid actions by the network management and control system, require timely and judicious collection of network state information. Within this context we will focus on the problem of shortest path routing, and identify pragmatic schemes that allow a central controller to collect relevant delay statistics from various links and nodes within the network. We present Significant Sampling as an adaptive monitoring technique to collect and disseminate network state information when it can be of significant value to the optimal operation of the network, and in particular when it can help in identifying the shortest routes.
We start by developing an analytical framework that can identify the optimal time for the collection of such information in a small but realistic setting, when the underlying delay model is a continuous-time diffusion process (e.g. Wiener process or Ornstein-Uhlenbeck process) and its parameters are known by the controller. We show that this technique balances the need for updated state information against the collection and dissemination costs and provides an algorithm that yields near optimum performance. We then extend the results by introducing a reinforcement learning framework that learns the aforementioned optimal policy from its own interactions with the network, and without any prior assumptions regarding the underlying delay model. In addition to achieving a performance comparable to the analytically derived policies, the deep reinforcement learning solution is more flexible and general and can accommodate a diverse set of network environments.
This is particularly important because it can provide good solutions for complex network environments where analytically tractable solutions are not feasible. We conclude our work by noting that sensible network controllers should continue to deliver a good performance between distinct instances of state collection and thus any meaningful solution should strive to meet application demands despite the unavoidable uncertainty about the instantaneous state of the network. To that end, we introduce a novel diversity routing scheme that can accommodate requirements regarding delay variations despite a controller's relative uncertainty about the instantaneous state of the network. More specifically we utilize mean-variance analysis as the basis for traffic distribution and route selection, and show that this technique can improve the users' quality of service by taking into account the correlated nature of delay across different paths.
We conclude this work by commenting on the potential application of this method to general transportation networks.
by Arman Rezaee.
Ph. D.
Ph.D. Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science

Los estilos APA, Harvard, Vancouver, ISO, etc.

11

Jaworski, P. "Cloud computing based adaptive traffic control and management". Thesis, Coventry University, 2013. http://curve.coventry.ac.uk/open/items/d63ba84e-bd0c-4e00-8242-310dbbaa3b92/1.

Texto completo

Resumen

Recent years have shown a growing concern over increasing traffic volume worldwide. The insufficient road capacity and the resulting congestions have become major problems in many urban areas. Congestions negatively impact the economy, the environment and the health of the population as well as the drivers satisfaction. Current solutions to this topical and timely problem rely on the exploitation of Intelligent Transportation Systems (ITS) technologies. ITS urban traffic management involves the collection and processing of a large amount of geographically distributed information to control distributed infrastructure and individual vehicles. The distributed nature of the problem prompted the development of a novel, scalable ITS-Cloud platform. The ITS-Cloud organises the processing and manages distributed data sources to provide traffic management methods with more accurate information about the state of the traffic. A new approach to service allocation, derived from the existing cloud and grid computing approaches, was created to address the unique needs of ITS traffic management. The ITS-Cloud hosts the collection of software services that form the Cloud based Traffic Management System (CTMS). CTMS combines intersection control algorithms with intersection approach advices to the vehicles and dynamic routing. The CTMS contains a novel Two-Step traffic management method that relies on the ITS-Cloud to deliver a detailed traffic simulation image and integrates an adaptive intersection control algorithm with a microscopic prediction mechanism. It is the first method able to perform simultaneous adaptive intersection control and intersection approach optimization. The Two-Step method builds on a novel pressure based adaptive intersection control algorithm as well as two new traffic prediction schemes. The developed traffic management system was evaluated using a new microscopic traffic simulation tool tightly integrated with the ITS-Cloud. The novel traffic management approaches were shown to outperform benchmark methods for a realistic range of traffic conditions and road network configurations. Unique to the work was the investigation of interactions between ITS components.

Los estilos APA, Harvard, Vancouver, ISO, etc.

12

Sermeno, Mena Salvador. "Vehicle thermal management control systems". Thesis, Lyon, INSA, 2015. http://www.theses.fr/2015ISAL0052.

Texto completo

Resumen

Les systèmes de refroidissement des véhicules continuent à se développer et devenir de plus en plus complexes. Ceci introduit des nouveaux problèmes dus aux interactions des composants et les perturbations du système. Avec la montée des prix des carburants; les développeurs et les compagnies cherchent à améliorer la consommation en respectant les normes d’émission. Une partie de l’énergie produite par le moteur est utilisé par les composants du circuit de refroidissement. L’utilisation d’auxiliaires électriques est une manière de réduire ces pertes parasites, mais ce n’est pas la seule solution. Des études récents proposent que un control plus adaptes des composants peux réduire la consommation de carburant. Actuellement, le groupe Volvo en essayant d’améliorer la performance du système de refroidissement des camions a installe des nouveaux composants pour la gestion thermique du moteur. Néanmoins, des problèmes ont été identifie lors d’essais véhicule. Une meilleure compréhension du système et de l’implémentation de composants est nécessaire pour limiter les effets non voulus. Le système de refroidissement d’un poids lourd a été étudié grâce à l’outil Bond Graph. Puis des nouvelles stratégies de control sont introduites : commande prédictive, commande par platitude, commande sans model et commande avec model réduit. Ces méthodes ont été implémentées dans une plateforme de simulation sur Matlab/Simulink. Les gains de consommation obtenue à partir de simulations sont entre 0.5 et 0.9%. Une analyse structurelle de l’architecture actuelle est présentée. D’après les conclusions de cette analyse, des propositions pour la modification de l’architecture du circuit sont évalués
The increasing complexity of engine cooling systems results in added interactions and disturbances to the performance. Besides, non-propulsion loads (fan, water pump…) draw a significant percentage of the engine’s power thus lowering the vehicle’s fuel efficiency. Recent studies have shown that by controlling components the efficiency can be improved by adjusting fan speed according to cooling needs, coolant flow, and oil flow. Currently, the Volvo group in order to optimize the performance of their truck’s cooling systems had installed new thermal management components. However, problems were found while testing control strategies and a better understanding of the interaction between components is required to prevent this from happening again. In this work, the bond graph approach has been applied for the study of the cooling system of a Heavy duty vehicle and has enabled subsystem interactions to be identified. Based on a simplified model issued from the bond graph, several control strategies have been built. These controllers are based on different control approaches: model predictive control, flatness control, model free control and model free control with reduced order model. These controllers were implemented in a simulation platform in the Matlab/Simulink environment. Results of the implementation of the new advanced control strategies are given. Fuel economy gains ranged between 0.5 and 0.9 %. A structural analysis of the current architecture is also proposed aiming at the optimization of the system. Given the insights from the analysis, an assessment of new concepts for the cooling system architecture is proposed

Los estilos APA, Harvard, Vancouver, ISO, etc.

13

Sander, Christopher y Clara Laidlaw. "How Initial Public Offerings Change Management Control System Packages". Thesis, Uppsala universitet, Företagsekonomiska institutionen, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-276772.

Texto completo

Resumen

This study aims to further develop research, from a management approach, by studying how MCS packages change when an organization undergoes an initial public offering. Furthermore, it aims to use Malmi and Brown’s (2008) management control system package in order to categorize and analyze the complexity of organizational change brought on by an initial public offering. This study draws on interviews with top managers in a high technological firm, which has recently been listed on the stock exchange. The results of this study imply that an initial public offering can change the MCS package in a number of different ways. Public companies do not necessarily become short-term, an initial public offering can affect a company’s external focus and measurements without affecting its internal measurements, in order for companies to become suitable for the stock market they formalize policies and appoint an independent board and listed companies can experience changes to their culture.

Los estilos APA, Harvard, Vancouver, ISO, etc.

14

Ballard, Herman Glenn. "The last planner system of production control". Thesis, University of Birmingham, 2000. http://etheses.bham.ac.uk//id/eprint/4789/.

Texto completo

Resumen

Project controls have traditionally been focused on after-the-fact detection of variances. This thesis proposes a control system, the Last Planner system, that causes the realization of plans, and thus supplements project management’s concern for management of contracts with the management of production. The Last Planner system has previously been successfully applied by firms with direct responsibility for production management; e.g., specialty contractors. This thesis extends system application to those coordinating specialists, both in design and construction, through a series of case studies, one of which also explores the limits of unilateral implementation by specialists. In addition to the extended application, two questions drive this research. The first question is 1) What can be done by way of tools provided and improved implementation of the Last Planner system of production control to increase plan reliability above the 70% PPC level? Previous research revealed substantial improvement in productivity for those who improved plan reliability to the 70% level, consequently there is reason to hope for further improvement, possibly in all performance dimensions, especially with application across an entire project rather than limited to individual specialty firms. That question is explored in three case studies, the last of which achieved the 90% target. The second question is 2) How/Can Last Planner be successfully applied to increase plan reliability during design processes. That question is explored in an extensive case study, which significantly contributes to understanding the design process from the perspective of active control, but unfortunately does not fully answer the question, primarily because the project was aborted prior to start of construction. However, it is argued that Last Planner is especially appropriate for design production control because of the value-generating nature of design, which renders ineffective traditional techniques such as detailed front end planning and control through after-the-fact detection of variances. Issues for future research are proposed, including root cause analysis of plan failures and quantification of the benefits of increased plan reliability for both design and construction processes.

Los estilos APA, Harvard, Vancouver, ISO, etc.

15

Frost, Damien. "Battery management systems with active loading and decentralised control". Thesis, University of Oxford, 2017. https://ora.ox.ac.uk/objects/uuid:27c8947d-967c-476a-b778-a0ad4d0a5f48.

Texto completo

Resumen

This thesis presents novel battery pack designs and control methods to be used with battery packs enhanced with power electronics. There are two areas of focus: 1) intelligent battery packs that are constructed out of many hot swappable modules and 2) smart cells that form the foundation of a completely decentralised battery management system (BMS). In both areas, the concept of active loading/charging is introduced. Active loading/charging balances the cells in a battery pack by loading each cell in proportion to its capacity. In this way, the state of charge of all cells in a series string remain synchronized at all times and all of the energy storage potential from every cell is utilized, despite any differences in capacity there may be. Experimental results from the intelligent battery show how the capacity of a pack of variably degraded cells can be increased by 46% from 97 Wh to 142 Wh using active loading/charging. Engineering design challenges of building a practical intelligent battery pack are addressed. Start up and shut down procedures, and their respective circuits, were carefully designed to ensure zero current draw from the battery cells in the off state, yet also provide a simple mechanism for turning on. Intra-pack communication was designed to provide adequate information flow and precise control. Thus, two intra-pack networks were designed: a real time communication network, and a data communication network. The decentralised control algorithms of the smart cell use a small filtering inductor as a multi-purpose sensor. By analysing the voltage across this filtering inductor, the switching actions of a string of smart cells can be optimised. Experimental results show that the optimised switching actions reduce the output voltage ripple by 83% and they synchronize the terminal voltages of the smart cells, and by extension, their states of charge. This forms the basis of a decentralised BMS that does not require any communication between cells or with a centralised controller, but can still achieve cell balancing through active loading/charging.

Los estilos APA, Harvard, Vancouver, ISO, etc.

16

Power, Yvonne. "The development of an integrated process operation management system". Thesis, Power, Yvonne (2004) The development of an integrated process operation management system. PhD thesis, Murdoch University, 2004. https://researchrepository.murdoch.edu.au/id/eprint/266/.

Texto completo

Resumen

This project details the development of a new framework known as the Coordinated Knowledge Management method to enable complete task integration of all low and midlevel tasks for process industries. The framework overcomes past problems of task integration, which made it impossible to have a fully integrated system and with integration being limited to data acquisition, regulatory control and occasionally supervisory control. The main component of the project includes the use of hierarchically structured timed place Petri nets, which have not previously been used for integrating tasks in intelligent process operations management. Tasks which have been integrated include all low-level tasks such as data acquisition, regulatory control and data reconciliation, and all mid-level tasks including supervisory control and most significantly the integration of process monitoring fault detection and diagnosis. The Coordinated Knowledge Management method makes use of hierarchical timed place Petri nets to (i) coordinate tasks, (ii) monitor the system, (iii) activate tasks, (iv) send requests for data updates and (iv) receive notice when tasks are complete. Visualization of the state of the system is achieved through the moving tokens in the Petri net. The integration Petri nets are generic enough to be applied to any plant for integration using existing modules thus allowing the integration of different tasks, which use different problem solving methodologies. Integrating tasks into an intelligent architecture has been difficult to achieve in the past since the developed framework must be able to take into account information flow and timing in a continuously changing environment. In this thesis Petri nets have been applied to continuous process operations rather than to batch processes as in the past. In a continuous process, raw materials are fed and products are delivered continuously at known flow-rates and the plant is generally operated at steady state (Gu and Bahri, 2002). However, even in a continuous process, data is received from the distributed control system (DCS) at discrete time intervals. By transforming this data into process events, a Petri net can be used for overseeing process operations. The use of hierarchical Petri nets as the coordination mechanism introduces inherent hierarchy without the rigidity of previous methods. Petri nets are used to model the conditions and events occurring within the system and modules. This enables the development of a self-monitoring system, which takes into account information flow and timing in a continuously changing environment. Another major obstacle to integration of tasks in the past has been the presence of faults in the process. The project included the integration of fault detection and diagnosis a component not integrated into current systems but which is necessary to prevent abnormal plant operation. A novel two-step supervisory fault detection and diagnosis framework was developed and tested for the detection and diagnosis of faults in large-scale systems, using condition-event nets for fault detection and Radial Basis Function neural networks for fault diagnosis. This fault detection and diagnosis methodology detects and diagnoses faults in the early stages of fault occurrence, before fault symptoms propagate throughout the plant. The Coordinated Knowledge Management method and the newly developed fault diagnosis module were developed in G21 and applied and tested on the Separation and Heating sections of the Pilot plant for the Bayer process at the School of Engineering Science, Murdoch University. Testing indicated that the use of an intelligent system comprising of Petri nets for integration of tasks results in improved plant performance and makes the plant easier to monitor increasing profits. The fault detection and diagnosis module was found to be useful in detecting faults very early on and diagnosing the exact location of faults, which would otherwise prove to be difficult to detect. This would also increase plant safety, reduce wastage and improve environmental considerations of the plant.

Los estilos APA, Harvard, Vancouver, ISO, etc.

17

Power, Yvonne. "The development of an integrated process operation management system". Power, Yvonne (2004) The development of an integrated process operation management system. PhD thesis, Murdoch University, 2004. http://researchrepository.murdoch.edu.au/266/.

Texto completo

Resumen

This project details the development of a new framework known as the Coordinated Knowledge Management method to enable complete task integration of all low and midlevel tasks for process industries. The framework overcomes past problems of task integration, which made it impossible to have a fully integrated system and with integration being limited to data acquisition, regulatory control and occasionally supervisory control. The main component of the project includes the use of hierarchically structured timed place Petri nets, which have not previously been used for integrating tasks in intelligent process operations management. Tasks which have been integrated include all low-level tasks such as data acquisition, regulatory control and data reconciliation, and all mid-level tasks including supervisory control and most significantly the integration of process monitoring fault detection and diagnosis. The Coordinated Knowledge Management method makes use of hierarchical timed place Petri nets to (i) coordinate tasks, (ii) monitor the system, (iii) activate tasks, (iv) send requests for data updates and (iv) receive notice when tasks are complete. Visualization of the state of the system is achieved through the moving tokens in the Petri net. The integration Petri nets are generic enough to be applied to any plant for integration using existing modules thus allowing the integration of different tasks, which use different problem solving methodologies. Integrating tasks into an intelligent architecture has been difficult to achieve in the past since the developed framework must be able to take into account information flow and timing in a continuously changing environment. In this thesis Petri nets have been applied to continuous process operations rather than to batch processes as in the past. In a continuous process, raw materials are fed and products are delivered continuously at known flow-rates and the plant is generally operated at steady state (Gu and Bahri, 2002). However, even in a continuous process, data is received from the distributed control system (DCS) at discrete time intervals. By transforming this data into process events, a Petri net can be used for overseeing process operations. The use of hierarchical Petri nets as the coordination mechanism introduces inherent hierarchy without the rigidity of previous methods. Petri nets are used to model the conditions and events occurring within the system and modules. This enables the development of a self-monitoring system, which takes into account information flow and timing in a continuously changing environment. Another major obstacle to integration of tasks in the past has been the presence of faults in the process. The project included the integration of fault detection and diagnosis a component not integrated into current systems but which is necessary to prevent abnormal plant operation. A novel two-step supervisory fault detection and diagnosis framework was developed and tested for the detection and diagnosis of faults in large-scale systems, using condition-event nets for fault detection and Radial Basis Function neural networks for fault diagnosis. This fault detection and diagnosis methodology detects and diagnoses faults in the early stages of fault occurrence, before fault symptoms propagate throughout the plant. The Coordinated Knowledge Management method and the newly developed fault diagnosis module were developed in G21 and applied and tested on the Separation and Heating sections of the Pilot plant for the Bayer process at the School of Engineering Science, Murdoch University. Testing indicated that the use of an intelligent system comprising of Petri nets for integration of tasks results in improved plant performance and makes the plant easier to monitor increasing profits. The fault detection and diagnosis module was found to be useful in detecting faults very early on and diagnosing the exact location of faults, which would otherwise prove to be difficult to detect. This would also increase plant safety, reduce wastage and improve environmental considerations of the plant.

Los estilos APA, Harvard, Vancouver, ISO, etc.

18

Mensah, Edoe F. Kwatny Harry G. "Logic-based optimal control for shipboard power system management /". Philadelphia, Pa. : Drexel University, 2008. http://hdl.handle.net/1860/2765.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

19

Leung, C. M. "Modelling and control of a greenhouse energy management system". Thesis, University of Westminster, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378339.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

20

DeBruin, Luke Andrew. "Modeling and Control for Advanced Automotive Thermal Management System". The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1452131016.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

21

Masri, Maher H. "The efficacy of budgets as a management control system". Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-08222009-040421/.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

22

Merical, Kyle I. "Model-Based Control Development for an Advanced Thermal Management System for Automotive Powertrains". The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1366074069.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

23

Tibazarwa, Augustine. "Disciplined agility for process control & automation". Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/58525.

Texto completo

Resumen

Thesis (S.M.)--Massachusetts Institute of Technology, Engineering Systems Division, System Design and Management Program, 2009.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 112-115).
Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of manufacturing equipment, the safe control of large quantities of energy and the safety of dangerous substances used during manufacturing. The manufacturing segment expects greater automation of larger processes, increased capability of process automation systems, and higher quality of those systems. At the same time, business requirements for process automation vendors demand shorter time to market, and greater market return for each dollar invested in product development. Therefore, process automation vendors must determine how to preserve discipline in development processes while adopting process agility necessary to meet dynamic business conditions. Interviews with 9 leaders from 6 companies (2 manufacturers, 2 process automation vendors and 2 automation consulting firms), survey feedback from development personnel and research of literature on state-of-the-art and state-of-the-practice, yielded over 90 findings and observations on process automation business needs, development of automation offerings, and on suitability of agile practices to process automation product development. Agile methods may require changes to manufacturer work processes, but would enable an automation vendor to unlock more of the manufacturer's production value.
(cont.) Disciplined adoption of agile methods is crucial for agility to take hold throughout an automation vendor's organization, and to meet the concerns of process automation stakeholders. Rather than dismiss the suitability of agile development to process automation, a prescriptive guidance is provided that integrates an opportunistic risk-based assessment of how much agility is appropriate. The four values and twelve principles of the Agile Manifesto are a good basis for 8 additional agile practices for process automation: transitioning to agile, investing in agile capability, managing critical system parameters, engineering system-robustness, balancing project risk, continuous system validation, assuring domain expertise and clarifying ecosystem role.
by Augustine Tibazarwa.
S.M.

Los estilos APA, Harvard, Vancouver, ISO, etc.

24

Almejalli, Khaled A., Keshav P. Dahal y M. Alamgir Hossain. "Intelligent traffic control decision support system". Springer-Verlag, 2007. http://hdl.handle.net/10454/2554.

Texto completo

Resumen

When non-recurrent road traffic congestion happens, the operator of the traffic control centre has to select the most appropriate traffic control measure or combination of measures in a short time to manage the traffic network. This is a complex task, which requires expert knowledge, much experience and fast reaction. There are a large number of factors related to a traffic state as well as a large number of possible control measures that need to be considered during the decision making process. The identification of suitable control measures for a given non-recurrent traffic congestion can be tough even for experienced operators. Therefore, simulation models are used in many cases. However, simulating different traffic scenarios for a number of control measures in a complicated situation is very time-consuming. In this paper we propose an intelligent traffic control decision support system (ITC-DSS) to assist the human operator of the traffic control centre to manage online the current traffic state. The proposed system combines three soft-computing approaches, namely fuzzy logic, neural network, and genetic algorithm. These approaches form a fuzzy-neural network tool with self-organization algorithm for initializing the membership functions, a GA algorithm for identifying fuzzy rules, and the back-propagation neural network algorithm for fine tuning the system parameters. The proposed system has been tested for a case-study of a small section of the ring-road around Riyadh city. The results obtained for the case study are promising and show that the proposed approach can provide an effective support for online traffic control.

Los estilos APA, Harvard, Vancouver, ISO, etc.

25

Hopley, Ingrid Elizabeth. "Decision support for emergency handling in energy management systems". Thesis, University of Cambridge, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.308997.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

26

Abdulrazzaq, Mohammed y Yuan Wei. "Industrial Control System (ICS) Network Asset Identiﬁcation and Risk Management". Thesis, Högskolan i Halmstad, Akademin för informationsteknologi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-38198.

Texto completo

Resumen

Setting against the significant background of Industrial 4.0, the Industrial Control System (ICS) accelerates and enriches the upgrade the existing production infrastructure. To make the infrastructures “smart”, huge parts of manual operations have been automated in this upgrade and more importantly, the isolated controlled processes have been connected through ICS. This has also raised the issues in asset management and security concerns. Being the starting point of securing the ICS, the asset identification is, nevertheless, first dealt by exploring the definition of assets in the ICS domain due to insufficient documentation and followed by the introduction of ICS constituents and their statuses in the whole network. When the definition is clear, a well-received categorization of assets in the ICS domain is introduced, while mapping out their important attributes and their significance relating the core of service they perform. To effectively tackle the ever-increasing amount of assets, identification approaches are compared and a case study was performed to test the effectiveness of two open source software. Apart from the identification part, this thesis describes a framework for efficient asset management from CRR. The four cyclic modules proposed give an overview on how the asset management should be managed according the dynamics of the assets in the production environment.

Los estilos APA, Harvard, Vancouver, ISO, etc.

27

Rafiliu, Sergiu. "Stability of Adaptive Distributed Real-TimeSystems with Dynamic Resource Management". Doctoral thesis, Linköpings universitet, Programvara och system, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-98721.

Texto completo

Resumen

Today's embedded distributed real-time systems, are exposed to large variations in resource usage due to complex software applications, sophisticated hardware platforms, and the impact of their run-time environment. As eciency becomes more important, the applications running on these systems are extended with on-line resource managers whose job is to adapt the system in the face of such variations. Distributed systems are often heterogeneous, meaning that the hardware platform consists of computing nodes with dierent performance, operating systems, and scheduling policies, linked through one or more networks using dierent protocols. In this thesis we explore whether resource managers used in such distributed embedded systems are stable, meaning that the system's resource usage is controlled under all possible run-time scenarios. Stability implies a bounded worst-case behavior of the system and can be linked with classic real-time systems' properties such as bounded response times for the software applications. In the case of distributed systems, the stability problem is particularly hard because software applications distributed over the dierent resources generate complex, cyclic dependencies between the resources, that need to be taken into account. In this thesis we develop a detailed mathematical model of an adaptive, distributed real-time system and we derive conditions that, if satised, guarantee its stability.

Los estilos APA, Harvard, Vancouver, ISO, etc.

28

Smith, Lyle Christopher. "Development of a reconfigurable assembly system with an integrated information management system". Thesis, Bloemfontein: Central University of Technology, Free State, 2014. http://hdl.handle.net/11462/247.

Texto completo

Resumen

Thesis (M. Tech. (Engineering Electrical)) -- Central University of Technology, Free State, [2014]
This dissertation evaluates the software and hardware components used to develop a Reconfigurable Assembly System with an Integrated Information Management System. The assembly system consists of a modular Cartesian robot and vision system. The research focuses on the reconfigurability, modularity, scalability and flexibility that can be achieved in terms of the software and hardware components used within the system. The assembly system can be divided into high-level control and low-level control components. All information related to the product, Cartesian positioning and processes to follow resides in the Information Management System. The Information Management System is the high-level component and consists of a database, web services and low-levelcontrol drivers. The high-level system responds to the data received from the low-level systems and determines the next process to take place. The low-level systems consist of the PLC (Programmable Logic Controller) and the vision system. The PLC controls the Cartesian robot’s motor controllers and handles all events raised by field devices (e g. sensors or push buttons). The vision system contains a number of pre-loaded inspections used to identify barcodes and parts, obtain positioning data and verify the products’ build quality. The Cartesian robot’s positioning data and the vision system’s inspections are controlled by the Information Management System. The results showed that the high-level control software components are able to add more modularity and reconfigurability to the system, as it can easily adapt to changes in the product. The high-level control components also have the ability to be reconfigured while the assembly system is online without affecting the assembly system. The low-level control system is better suited to handling the control of motor controllers, field devices and vision inspections over an industrial network.

Los estilos APA, Harvard, Vancouver, ISO, etc.

29

Theodorakopoulos, Thomas F. "Integrated cost management system for delivering construction projects". Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/27629.

Texto completo

Resumen

Cost management forms a major discipline in delivering construction projects of different sizes and complexity. Traditional cost management systems are mostly based on principles enacted several decades ago. A notable feature of these traditional cost management systems is that key information required for critical decisions is usually produced too late, and is often too aggregated and configured in a form that is not amenable to the requirements for current project management practice. Other problems associated with traditional cost systems relate to inadequacies in estimating and cost control processes and particularly the lack of integration of cost management across the whole project. The lack of integration means measurements provided by traditional cost systems do not sufficiently align with the goals and objectives set for the project. To address these inherent weaknesses in the current practice of cost management, a number of studies have argued for an integrated alternative that better responds to the information demand and decision making need to be developed. The thesis presents the development of a solution to such an integrated cost management system. The developed solution addresses the gaps of the traditional option by integrating the stages making up the whole life cycle of the project to enable professionals gain an appreciation of the ramifications of any early decisions made. The investigation conducted to support the development of the integrated cost management system and the applied model addresses user requirements and determination of the system boundary conditions for efficacious use by key decision makers. The new cost management system developed achieves a linkage of the planning and control stages into one, with a continuous stream of cost management information in both stages. The integration ensures that cost information is more relevant to the circumstances of the modern project manager.

Los estilos APA, Harvard, Vancouver, ISO, etc.

30

Wilcox, Russ Mark 1957. "An interactive PC-based network management and control package using a database management system". Thesis, The University of Arizona, 1988. http://hdl.handle.net/10150/276805.

Texto completo

Resumen

The growing widespread use of data communication networks has led to increased reliance on the availability of network resources. The network itself is a critical resource which must be managed in a timely and effective manner. In order to manage the network effectively, the network manager must have powerful tools that present network information in a fast and logical way. The work presented here is the design and development of a network management tool for Sytek broadband networks. The Sytek Network Management Package (SNMP) incorporates a commercial database management system, Rbase System V, and menu oriented management functions for the University of Arizona Sytek broadband networks. The SNMP is written in C and executes on a PC connected to the Sytek network. The SNMP allows a network manager to manage both the Sytek LocalNet 20 and System 2000 networks.

Los estilos APA, Harvard, Vancouver, ISO, etc.

31

DeSando, Michael Duke. "Universal Programmable Battery Charger with Optional Battery Management System". DigitalCommons@CalPoly, 2015. https://digitalcommons.calpoly.edu/theses/1409.

Texto completo

Resumen

This report demonstrates improvements made in battery charging and battery management technology through the design of a universal programmable battery charger with optional battery management system attachment. This charger offers improvements in charge efficiency and unique battery charging algorithms to charge a variety of battery chemistries with variety of power requirements. Improvements in efficiency result from a synchronous Buck Controller topology as compared to previous universal chargers that use asynchronous Buck-Boost Converter topologies. This battery charger also surpasses current universal battery chargers by offering different charge modes for different battery chemistries. Charge modes provide the user an option between extending the life of the battery by selecting a mode with a slower, less stressful charge rate or a shorter charge time with a fast, more stressful charging mode. The user can also choose a charge mode in which the battery charges to full capacity, resulting in maximum runtime or a less than full capacity, which puts less stress on the battery thus extending the lifetime. Ultimately, this system permits weighing the performance tradeoff of battery lifetime and charge time. The optional battery management system attachment offers more precise monitoring of each cell and cell balancing for Li-Ion batteries. This further enhances the performance of the charger when integrated, but is not necessary for charger operation. The battery charger consists of three subcircuits: A microcontroller unit, a power stage, and a current sensing circuit. A C2000 Piccolo F28069 microcontroller controls a LM5117 Buck Controller by injecting a pulse-width modulated signal into the feedback node controlling the output of the buck to set a constant current or constant voltage thus creating a programmable battery charger. The pulse-width modulated signal changes according to charge algorithms created in software for specific battery chemistries and charge requirements. An analog-to-digital converter on the microcontroller monitors battery voltage by using a voltage divider and an INA169 current shunt monitor, which outputs a voltage corresponding to the charge current to another analog-to-digital converter on the microcontroller, monitors the charge current. This allows the charger program to maintain correct and safe charging conditions for each charge mode in addition to measuring output power. Lights on the microcontroller display a real-time status to the user of which portion of the charge profile the charger is in. A solid red light means the charger is in the constant current portion of the charge profile. A blinking red light means the charger is in the constant voltage portion. No red light means the battery charger finished and the battery is currently charged above nominal voltage. The battery charger works with the battery management system in the next section to provide ultimate battery charging and managing capabilities. The battery management system consists of two subcircuits: A microcontroller and a battery monitoring circuit. The MSP430FR5969 microcontroller unit communicates with BQ76PL536 battery management integrated circuits to create a battery management system that monitors data such as cell voltage, pack voltage, pack temperature, state of charge, fault statuses, alert statuses, and a variety of other useful cell parameters. This data displays on a liquid crystal display screen through different menu options. The user scrolls through the menus using a capacitive touch slider on the microcontroller unit and selects a given option using the option select button. A cell balance mode allows the user to check the balance of the cells and allows cell balancing if the cells differ by more than a set threshold.

Los estilos APA, Harvard, Vancouver, ISO, etc.

32

Bielunska-Perlikowski, Krystyna. "Planning, control and management of multicellular manufacturing systems by production authorization cards, PAC, system". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/NQ31517.pdf.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

33

Khan, Shaharyar S. M. Massachusetts Institute of Technology. "Using a system-theoretic approach to identify cyber- vulnerabilities and mitigations in industrial control systems". Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/122437.

Texto completo

Resumen

Thesis: S.M. in Engineering and Management, Massachusetts Institute of Technology, System Design and Management Program, 2019
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 123-128).
Recent cyber-physical attacks, such as Stuxnet, Triton etc., have invoked an ominous realization about the lethality of such attacks and the vulnerability of critical infrastructure, including power, gas and water distribution control systems. The traditional industrial practice to enhance security posture by utilizing IT security-biased protection methods narrowly focuses on improving cyber hygiene and individual component protection. Albeit essential and a good countermeasure against indiscriminate, non-targeted attacks, the reality of modern industrial control systems is that they are highly complex, interdependent and software-intensive sociotechnical systems. This makes traditional methods of defense largely impotent in the face of targeted attacks by advanced cyber-adversaries - as was demonstrated by Stuxnet.
A new realization is aggressively permeating through the industry about the need to use a holistic approach that integrates safety and security considerations to rethink, reengineer and redesign these complex control systems. System-Theoretic Accident Model & Processes (STAMP) offers a powerful, holistic, structured framework to analyze safety and security of complex cyber-physical systems in an integrated fashion. The electric grid is universally acknowledged as the holy grail of a target for an advanced cyberadversary. In light of this, this work demonstrates the use of a STAMP-based analysis method on the electric generation and distribution system of the MIT central utilities plant. The analysis is presented in a robust and structured format which can be emulated to analyze larger systems.
Several hazardous control actions such as out-of-sync breaker closure, generator overfluxing, turbine overspeed etc., are identified which could be exploited to cause permanent physical damage to the plant. While traditional counter-measures exist, it is argued that they need to be rethought in the face of potential cyber-attacks by advanced adversaries. Finally, several new functional requirements are presented which do not only span individual technical components but also the broader socio-organizational system.
by Shaharyar Khan.
S.M. in Engineering and Management
S.M.inEngineeringandManagement Massachusetts Institute of Technology, System Design and Management Program

Los estilos APA, Harvard, Vancouver, ISO, etc.

34

Becher, Michael. "Integrated capacity and price control in revenue management : a fuzzy system approach /". Wiesbaden : Gabler, 2008. http://sfx.ethz.ch/sfx_locater?sid=ALEPH:EBI01&genre=book&isbn=9783834996503&id=doi:10.1007/978-3-8349-9650-3.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

35

Yang, Jun. "An expert system for project analysis and control". Thesis, Queensland University of Technology, 1991.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

36

Thipphayathetthana, Somwang. "Model-based guidelines for user-centric satellite control software development". Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/105320.

Texto completo

Resumen

Thesis: S.M. in Engineering and Management, Massachusetts Institute of Technology, Engineering Systems Division, 2015.
Cataloged from PDF version of thesis.
Includes bibliographical references (page 45).
Three persistent common problems in satellite ground control software used by satellite controllers are obsolescence, lack of desired features and flexibilities, and endless software bug fixing. The obsolescence problem occurs when computer and ground equipment hardware become obsolete usually after only one third into the satellite mission lifetime. The satellite ground control software needs to be updated to accommodate changes on the hardware side, requiring significant work of satellite operators to test, verify, and validate these software updates. Software updates can also result from a new software version that offers new features or just fixes some bugs. Trying to help solve these problems, an OPM model and guidelines for developing satellite ground control software have been proposed. The system makes use of a database-driven application and concepts of object-process orientation and modularity. In the new proposed framework, instead of coding each software function separately, the common base functions will be coded, and combining them in various ways will provide the different required functions. The formation and combination of these base functions will be governed by the main code, definitions, and database parameters. These design principles will make sure that the new software framework would provide satellite operators with the flexibility to create new features, and enable software developer to find bugs quicker and fix them more effectively.
by Somwang Thipphayathetthana.
S.M. in Engineering and Management

Los estilos APA, Harvard, Vancouver, ISO, etc.

37

Forbes, Harold C. "Operating system principles and constructs for dynamic multi-processor real-time control systems". Diss., Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/8165.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

38

Wang, Hua. "Access management in electronic commerce system". University of Southern Queensland, Faculty of Sciences, 2004. http://eprints.usq.edu.au/archive/00001522/.

Texto completo

Resumen

The definition of Electronic commerce is the use of electronic transmission mediums to engage in the exchange, including buying and selling, of products and services requiring transportation, either physically or digitally, from location to location. Electronic commerce systems, including mobile e-commerce, are widely used since 1990. The number of world-wide Internet users tripled between 1993 and 1995 to 60 million, and by 2000 there were 250 million users. More than one hundred countries have Internet access. Electronic commerce, especial mobile e-commerce systems, allows their users to access a large set of traditional (for example, voice communications) and contemporary (for example, e-shop) services without being tethered to one particular physical location. With the increasing use of electronic service systems for security sensitive application (for example, e-shop) that can be expected in the future, the provision of secure services becomes more important. The dynamic mobile environment is incompatible with static security services. Electronic service access across multiple service domains, and the traditional access mechanisms rely on cross-domain authentication using roaming agreements starting home location. Cross-domain authentication involves many complicated authentication activities when the roam path is long. This limits future electronic commerce applications. Normally, there are three participants in an electronic service. These are users, service providers, and services. Some services bind users and service providers as well as services such as flight services; other services do not bind any participants, for instance by using cash in shopping services, everyone can use cash to buy anything in shops. Hence, depending on which parts are bound, there are different kinds of electronic services. However, there is no scheme to provide a solution for all kinds of electronic services. Users have to change service systems if they want to apply different kind of electronic services on the Internet. From the consumer's point of view, users often prefer to have a total solution for all kinds of service problems, some degree of anonymity with no unnecessary cross authentications and a clear statement of account when shopping over the Internet. There are some suggested solutions for electronic service systems, but the solutions are neither total solution for all kinds of services nor have some degree of anonymity with a clear statement of account. In our work, we build a bridge between existing technologies and electronic service theory such as e-payment, security and so on. We aim to provide a foundation for the improvement of technology to aid electronic service application. As validation, several technologies for electronic service system design have been enhanced and improved in this project. To fix the problems mentioned above, we extend our idea to a ticket based access service system. The user in the above electronic service system has to pay when s/he obtains service. S/He can pay by traditional cash (physical cash), check, credit or electronic cash. The best way to pay money for goods or services on the Internet is using electronic cash. Consumers, when shopping over the Internet, often prefer to have a high level of anonymity with important things and a low level with general one. The ideal system needs to provide some degree of anonymity for consumers so that they cannot be traced by banks. There are a number of proposals for electronic cash systems. All of them are either too large to manage or lack flexibility in providing anonymity. Therefore, they are not suitable solutions for electronic payment in the future. We propose a secure, scalable anonymity and practical payment protocol for Internet purchases. The protocol uses electronic cash for payment transactions. In this new protocol, from the viewpoint of banks, consumers can improve anonymity if they are worried about disclosure of their identities. An agent, namely anonymity provider agent provides a higher anonymous certificate and improves the security of the consumers. The agent will certify re-encrypted data after verifying the validity of the content from consumers, but with no private information of the consumers required. With this new method, each consumer can get the required anonymity level. Electronic service systems involve various subsystems such as service systems, payment systems, and management systems. Users and service providers are widely distributed and use heterogeneous catalog systems. They are rapidly increasing in dynamic environments. The management of these service systems will be very complex. Whether systems are successful or not depends on the quality of their management. To simplify the management of e-commerce systems \cite{Sandhu97}, we discuss role based access control management. We define roles and permissions in the subsystems. For example, there are roles TELLER, AUDITOR, MANAGER and permissions teller (account operation), audit operation, managerial decision in a bank system. Permissions are assigned to roles such as permission teller is assigned to role TELLER. People (users) employed in the bank are granted roles to perform associated duties. However, there are conflicts between various roles as well as between various permissions. These conflicts may cause serious security problems with the bank system. For instance, if permissions teller and audit operation are assigned to a role, then a person with this role will have too much privilege to break the security of the bank system. Therefore, the organizing of relationships between users and roles, roles and permissions currently requires further development. Role based access control (RBAC) has been widely used in database management and operating systems. In 1993, the National Institute of Standards and Technology (NIST) developed prototype implementations, sponsored external research, and published formal RBAC models. Since then, many RBAC practical applications have been implemented, because RBAC has many advantages such as reducing administration cost and complexity. However, there are some problems which may arise in RBAC management. One is related to authorization granting process. For example, when a role is granted to a user, this role may conflict with other roles of the user or together with this role; the user may have or derive a high level of authority. Another is related to authorization revocation. For instance, when a role is revoked from a user, the user may still have the role. To solve these problems, we present an authorization granting algorithm, and weak revocation and strong revocation algorithms that are based on relational algebra. The algorithms check conflicts and therefore help allocate the roles and permissions without compromising the security in RBAC. We describe the applications of the new algorithms with an anonymity scalable payment scheme. In summary, this thesis has made the following major contributions in electronic service systems: 1. A ticket based global solution for electronic commerce systems; A ticket based solution is designed for different kinds of e-services. Tickets provide a flexible mechanism and users can check charges at anytime. 2. Untraceable electronic cash system; An untraceable e-cash system is developed, in which the bank involvement in the payment transaction between a user and a receiver is eliminated. Users remain anonymous, unless she/he spends a coin more than once. 3. A self-scalable anonymity electronic payment system; In this payment system, from the viewpoint of banks, consumers can improve anonymity if they are worried about disclosure of their identities. Each consumer can get the required anonymity level. 4. Using RBAC to manage electronic payment system; The basic structure of RBAC is reviewed. The challenge problems in the management of RBAC with electronic payment systems are analysed and how to use RBAC to manage electronic payment system is proposed. 5. The investigation of recovery algorithms for conflicting problems in user-role assignments and permission-role assignments. Formal authorization allocation algorithms for role-based access control have developed. The formal approaches are based on relational structure, and relational algebra and are used to check conflicting problems between roles and between permissions.

Los estilos APA, Harvard, Vancouver, ISO, etc.

39

Seekins, Ryan N. (Ryan Nicholas). "The Internet of things applied to command and control networks". Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/106263.

Texto completo

Resumen

Thesis: S.M. in Engineering and Management, Massachusetts Institute of Technology, School of Engineering, System Design and Management Program, Engineering and Management Program, 2016.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 92-96).
The number of people and things connected to the Internet continue growing at an exponential rate. This record setting growth along with the reduction in small sensor costs and machine learning enabled a concept called the Internet of Things (IoT) to thrive. With numerous applications in both commercial and government spaces, the IoT has the ability to transform any organizations network capabilities. The Air Force has a unique set of requirements centered on cyberspace superiority and the ability to command and control people and things. This paper leverages the traditional systems engineering "'V" model as a framework to develop and analyze a concept for an Air Force command and control network. Methods and tools such as stakeholder analysis, hierarchical control structures and object-process diagrams are used to develop the concept of operations, system architecture, and the preliminary design. The programs technology readiness is also assessed before outlining key milestones and deliverables required for transitioning the program forward in the acquisition life-cycle.
by Ryan N. Seekins.
S.M. in Engineering and Management

Los estilos APA, Harvard, Vancouver, ISO, etc.

40

De, La Cruz Marquez Michelle. "Management Control Systems in Not for Profit Organization". Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-10850.

Texto completo

Resumen

The diploma thesis is about management control system. The first part contains the analysis of the subject, the factors, components and tools of management control. In the second part is about the difference of management control in profit and non-profit organizations.

Los estilos APA, Harvard, Vancouver, ISO, etc.

41

Sarban, Singh Ranjit Singh. "A design scheme of energy management, control, optimisation system for hybrid solar-wind and battery energy storages system". Thesis, Brunel University, 2016. http://bura.brunel.ac.uk/handle/2438/13788.

Texto completo

Resumen

Hybrid renewable energy system was introduced to improve the individual renewable energy power system’s productivity and operation-ability. This circumstance has led towards an extensive technological study and analysis on the hybrid renewable energy system. The extensive technological study is conducted using many different approaches, but in this research the linear programming, artificial intelligence and smart grid approaches are studied. This thesis proposed a complete hardware system development, implementation and construction of real-time DC Hybrid Renewable Energy System for solar-wind-battery energy source integrated with grid network support. The proposed real-time DC HRES hardware system adopts the hybrid renewable energy system concept which is composed of solar photovoltaic, wind energy system, battery energy storage system and grid network support. The real-time DC HRES hardware system research work is divided into three stages. Stage 1 involves modelling and simulation of the proposed system using MATLAB Simulink/Stateflow software. During this stage, system’s methodological design and development is emphasised. The obtained results are considered as fundamental finding to design, develop, integrate, implement and construct the real-time DC HRES hardware system. Stage II is designing and developing the electronic circuits for the real-time DC HRES hardware system using PROTEUS software. Real time simulation is performed on the electronic circuits to study and analyse the circuit’s behaviour. This stage also involves embedded software application development for the microcontroller PIC16F877A. Thus, continuous dynamic decision-making algorithm is developed and incorporated into microcontroller PIC16F877A. Next, electronic circuits and continuous dynamic decision-making algorithm are integrated with the microcontroller PIC16F877A as a real-time DC HRES hardware system to perform real time simulation. The real-time DC HRES hardware system simulation results are studied, analysed and compared with the results obtained in Stage 1. Any indifference between the obtained results in Stage 1 and Stage 2 are analysed and necessary changes are made. Stage 3 involves integrating, implementation and construction of real-time DC HRES. The continuous dynamic decision-making algorithm is also incorporated into the real microcontroller PCI16F877A development board. Real-time DC HRES’s experimental results have successfully demonstrated the system’s ability to perform supervision, coordination, management and control of all the available energy sources with lease dependency on the grid network. The obtained results demonstrated the energy management and optimisation of the available energy sources as primary power source deliver.

Los estilos APA, Harvard, Vancouver, ISO, etc.

42

Horan, Stephen, Ryan Aaronscooke y Daniel Jaramillo. "IP-Based Networking as Part of the Design of a Payload Control System". International Foundation for Telemetering, 2008. http://hdl.handle.net/10150/606180.

Texto completo

Resumen

ITC/USA 2008 Conference Proceedings / The Forty-Fourth Annual International Telemetering Conference and Technical Exhibition / October 27-30, 2008 / Town and Country Resort & Convention Center, San Diego, California
As part of a project to develop small satellites, we have developed a combined ground station and flight computer that use IP-based networking for the command and telemetry data communications. The network uses a private IP network between the payload and the ground-station. Commands are sent to the payload as UDP short message packets. Status and real-time telemetry are sent as UDP text strings. Production data are sent as files using a ftp-type of data exchange. Production data types include numeric data (sensor data) and JPEG-formatted picture data (full pictures and thumbnails). Details of the software used, challenges of making the system work over a low-quality radio link, and integration with the operating system will be discussed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

43

Dunkler, Olaf. "Human aided control of a flexible machining system". Thesis, Georgia Institute of Technology, 1986. http://hdl.handle.net/1853/25663.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

44

Rydeman, Gustav. "Decision Support for Work Flow Control in a Warehouse Management System". Thesis, Uppsala University, Department of Information Technology, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-112111.

Texto completo

Resumen

As volatility and customer demands increase, companies are simultaneously trying to reduce their logistic costs. Distribution centers are being forced to increase their agility and flexibility in order to rapidly execute on continuously evolving logistics plans. One proven way of gaining warehouse efficiency and create visibility into processes is through implementation of a Warehouse Management System (WMS) – a leverage technology that introduces automation in warehouse processes. With system directed task assignment work can be optimally balanced and distributed to available resources and auto-generate tasks with high quality. A critical aspect of this have shown to be prioritization of tasks in the dynamic terminal environment. To introduce a new work flow support into an existing organization requires changes in routines, roles and organization to harvest the real efficiency gains. In this report these problematics are applied to the distributing terminal of SCA Transforest, Tunadal, Sweden. A benchmarking study of a terminal in the same business, the Stora Enso terminal in Zeebrügge, Belgium, is the object of comparison. At the latter terminal system directed task assignment has been successfully implemented. Based on the findings from the benchmarking study and other research this report present important success factors as well as specific solutions to issues regarding automation, flexibility and process visibility - with the purpose to guide SCA Transforest in the future system development.

Los estilos APA, Harvard, Vancouver, ISO, etc.

45

Maxwell, Andrew Charles. "A TEACHING JOB SHOP CONTROL SYSTEM WITH REAL-TIME INVENTORY MANAGEMENT". NCSU, 2005. http://www.lib.ncsu.edu/theses/available/etd-06302005-195145/.

Texto completo

Resumen

This thesis presents a teaching job shop control system for running in assembly laboratories at colleges and universities in preparing Industrial Engineering students for challenges faced in real-world factories. Current techniques fail to encompass this idea of training for students like the proposed method does. Microsoft Access was used in creating a database that is the center point in this new system. Inventory is managed using this database system and added if parts are created in the manufacturing lab and moved to the assembly area. The system will stop if parts are low until new parts are created. In this new system, a pallet with an unfinished product on it moves down a conveyor system until it reaches the next workstation. At this station, the station operator scans a barcode on the pallet. This barcode contains what product is on this pallet. Based on this information, an ordered list of tasks appears on the workstation computer screen and must be done before the pallet can be moved on. When all tasks have been completed at a station, the station operator clicks ?done? on the screen and then can either move to the next pallet or end the run. Statistics are kept on the quality of the final products and parts as well as a work-in-process and on a goal percentage of good products out at the end of a one-hour time frame. Administrators will be able to assign tasks and parts to products and stations, as well as be able assign the goal ahead of time.

Los estilos APA, Harvard, Vancouver, ISO, etc.

46

Tan, Lujiao. "Takagi-Sugeno and Mamdani Fuzzy Control of a Resort Management System". Thesis, Blekinge Tekniska Högskola, Sektionen för ingenjörsvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-2661.

Texto completo

Resumen

By means of fuzzy set theory as well as Takagi-Sugeno and Mamdani fuzzy controller, this paper presents the investigation of a Resort Management System implemented by a combination of a T-S model and a Mamdani model. It demonstrates the procedure of the specific premise parameters identification and consequence parameters identification performed by regression knowledge in the T-S model, and the process of the fuzzification, the rule base creation and the defuzzification with COG technique in the Mamdani model. Therefore, an aggregation between T-S controller and Mamdani controller applied in the field of management by a novel angle is illustrated, which, as a result, devotes an improved management system that shares great convenience in the control process when combined with mathematics. Moreover, a modification of the conventional Takagi-Sugeno and Mamdani controller is demonstrated in conjunction with fuzzy operations t-norms and OWA by adjusting the -value, which is used in the calculation of final outputs in the T-S model and the computation of rule consequences in the Mamdani model. The algebraic intersection, bounded intersection as well as the -parameter t-norm are the t-norms which are going to be introduced. Besides, we have tested that t-norms generate the same alpha values when the membership degrees meet the boundary with the value of 1 or 0 while OWA can still yield a well-balanced result different from the one computing by minimum operation. Nevertheless both t-norms and OWA are able to shift the alpha-value in a well-adjusted way when the membership degrees lie in the interval [0,1]. A tendency has been shown that alpha-value tends to decrease by means of t-norms and OWA operations and consequently, the final outputs appear to be reduced.

Los estilos APA, Harvard, Vancouver, ISO, etc.

47

Tipton, Austin L. "Simulation, Experimentation, Control and Management of a Novel Fuel Thermal System". Wright State University / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=wright1578320719632833.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

48

WU, Ray y 吳瑞斌. "Management Control System in Taiwan". Thesis, 1996. http://ndltd.ncl.edu.tw/handle/32888547951001671338.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

49

"Enhancement of inventory management system". 1998. http://library.cuhk.edu.hk/record=b5889392.

Texto completo

Resumen

by Chung Chun Hung.
Thesis (M.B.A.)--Chinese University of Hong Kong, 1998.
Includes bibliographical references (leaves 65-66).
ABSTRACT --- p.ii
TABLE OF CONTENTS --- p.iv
LIST OF TABLES --- p.v
ACKNOWLEDGMENTS --- p.vi
Chapter
Chapter I. --- INTRODUCTION --- p.1
Company Background --- p.2
Chapter II. --- OBJECTIVE & METHODOLOGY --- p.7
Objective --- p.7
Methodology --- p.7
Chapter III. --- CURRENT INVENTORY MANAGEMENT PROBLEMS & CAUSES --- p.9
Chapter IV. --- APPLICATION OF ANALYTICAL TOOLS IN INVENTORY MANAGEMENT --- p.13
Demand Forecasting --- p.14
Forecast Evaluation --- p.17
Result Analysis --- p.18
Inventory Management for Individual Items --- p.20
Safety Stock & Reorder Point --- p.20
Economic Order Quantity --- p.23
Multiple-Item Management --- p.25
Multiple Item ABC Analysis --- p.25
Replenishment Order for Multiple Items --- p.21
Chapter V. --- RECOMMENDATIONS & CONCLUSIONS --- p.32
APPENDIX --- p.36
BIBLIOGRAPHY --- p.65

Los estilos APA, Harvard, Vancouver, ISO, etc.

50

Lai, Mei-Wen y 賴美雯. "The Chemicals Management System with Control Banding". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/52032742205228058712.

Texto completo

Resumen

碩士
國立交通大學
工學院永續環境科技學程
104
While the production and use of chemicals facilitate economic progress, they can also be harmful to human health. The Ministry of Labor officially promulgated the Regulations Governing Assessment and Control Banding of Hazardous Chemicals in 2015, requiring employers to classify chemicals according to CNS 15030 and take necessary measures to contain hazardous chemicals based on their classifications. The Regulations provide grading principles for permissible exposure limits (PELs) and working environments that should be monitored and incorporate chemical control banding (CCB) tools with all new concepts for qualitative and semi-quantitative exposure assessment. The simple and effective implementation procedures can enhance the prevention of chemical hazards. In compliance with the Regulations, this study selected an existing chemical management system (CMS) of a research institute and expanded its indexing and control banding functions. This study investigated current regulations and system conditions to understand the discrepancies between the system and regulatory requirements and then employed Deming’ PDCA to improve the system and apply it to operations in its laboratory to verify its appropriateness. The laboratories selected for this study handle hazardous chemicals, which were assessed and classified to identify operating sites with high risks, residual risks, or regulatory non-compliances. At the same time, this study develops CMS-CCB procedures. The results indicate that the exposure prevention measures at the operating sites all complied with CCB suggestions. Detected and estimated exposure concentrations are compared with PELs for operating sites, and the results reveale that 2% of the assessment items belong to Category 3 and requires immediate improvement, while 48% necessitate further monitoring or assessment. The results of this study provide reference to the case study laboratories for further assessment and improvement. This study also examined the benefits of implementing CCB in the laboratories of the institue. It is hoped that the CCB can effectively reduce potential occupational safety and health risks.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Tesis sobre el tema "Management Control System"

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros