Bibliografías temáticas / Industry Pictures

Literatura académica sobre el tema "Industry Pictures"

Autor: Grafiati
Publicado: 26 de julio de 2024
Última modificación: 27 de julio de 2024

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Índice

Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Industry Pictures".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Artículos de revistas sobre el tema "Industry Pictures"

1

Christopherson, S. y M. Storper. "The City as Studio; The World as Back Lot: The Impact of Vertical Disintegration on the Location of the Motion Picture Industry". Environment and Planning D: Society and Space 4, n.º 3 (septiembre de 1986): 305–20. http://dx.doi.org/10.1068/d040305.

Texto completo
Resumen
Motion picture production is currently carried out by small firms under contract to an independent producer rather than in large integrated firms, the major studios. In this paper the emergence of this vertically disintegrated industry is traced and its impact on the location of the motion picture industry is analyzed. Vertical disintegration has led to a reagglomeration of motion picture employment and establishments in Los Angeles, despite the dispersal of film shooting throughout the world. The processes that are shaping the present-day organization of motion pictures can be observed across a range of industries. An examination of these processes in motion pictures suggests that their association with reagglomeration in urban centers could have an important impact on patterns of urbanization.
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Orme, Tylor y Harold L. Vogel. "Is the Motion-Pictures Industry Recession Proof?" International Advances in Economic Research 26, n.º 4 (noviembre de 2020): 363–75. http://dx.doi.org/10.1007/s11294-020-09811-2.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Marvasti, A. "Motion Pictures Industry: Economies of Scale and Trade". International Journal of the Economics of Business 7, n.º 1 (febrero de 2000): 99–114. http://dx.doi.org/10.1080/13571510084087.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Hennig-Thurau, Thorsten, Victor Henning y Henrik Sattler. "Consumer File Sharing of Motion Pictures". Journal of Marketing 71, n.º 4 (octubre de 2007): 1–18. http://dx.doi.org/10.1509/jmkg.71.4.001.

Texto completo
Resumen
Illegal consumer file sharing of motion pictures is considered a major threat to the movie industry. Whereas industry advocates and some scholars postulate a cannibalistic effect on commercial forms of movie consumption, other researchers deny this effect, though sound evidence is lacking on both sides. Drawing on extant research and utility theory, the authors present hypotheses on the consequences and determinants of consumer file sharing and test them with data from a controlled longitudinal panel study of German consumers. The data contain information on the consumers' intentions toward and actual behavior in relation to the consumption of 25 new motion pictures, allowing the authors to study more than 10,000 individual file-sharing opportunities. The authors test the effect of file sharing on commercial movie consumption using a series of ReLogit regression analyses and apply partial least squares structural equation modeling to identify the determinants of consumer file sharing. They find evidence of substantial cannibalization of theater visits, DVD rentals, and DVD purchases responsible for annual revenue losses of $300 million in Germany. Five categories of file-sharing behavior drive file sharing and have a significant impact on how consumers obtain and watch illegal movie copies.
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Dong, Hao, Yu Liu, Peng Li y Qiao Hu Yang. "A Mobile Monitoring Extension of PC-PLC Architecture". Applied Mechanics and Materials 433-435 (octubre de 2013): 1535–38. http://dx.doi.org/10.4028/www.scientific.net/amm.433-435.1535.

Texto completo
Resumen
In view of the popularity of mobile device within the industry, a mobile monitor extension of PC-PLC architecture is designed and implemented. The extension module utilizes OLE for Process Control (OPC) technology to access industry control configuration software, and then publishes monitoring operations as service by employing Windows Communication Foundation (WCF), so that management staffs can monitor the process of production by any mobile device which has ability to invoke web service. Since Android operation system has a high market share, some industry controls based on Android are developed, which have been used to configure production pictures. Combing production picture generated in advance and real-time production data, the extension module is able to provide the capability of visual monitoring at any time and place.
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Huang, Tingting, Muhammad Fadhil Wong Bin Abdullah y Abdul Aziz Bin Zalay @. Zali. "Re-design Requirements Research for Intangible Cultural Heritage Products in the Tourism Industry: A Case Study of Mianzhu New Year Picture". International Journal of Religion 5, n.º 10 (15 de julio de 2024): 4083–98. http://dx.doi.org/10.61707/pfveyw66.

Texto completo
Resumen
In response to the challenges faced by Mianzhu New Year picture, a national-level intangible cultural heritage in China, in the transformation of tourism, including issues of homogenization, lack of cultural content, and limited innovation, this study aims to optimize the design of tourism derivative products of Mianzhu New Year picture. The goal is to avoid issues that may impact tourism consumption and cultural development. To achieve this, a method for evaluating the redesign requirements of Mianzhu New Year picture tourism products based on the KANO-AHP hybrid model is proposed, with the intention of providing guidance for the development of derivative products of intangible cultural heritage.Focusing on the "cultural creative products" in the redesign of Mianzhu New Year picture tourism products, the KANO model is applied. Based on tourism marketing demands, the study focuses on three main intentions: enhancing tourism consumption, cultural communication, and artistic innovation of Mianzhu New Year pictures tourism products. These are further subdivided into specific contents of artistry, functionality, technology, safety, and culture. A total of 30 requirement indicators are identified, and their KANO requirement attributes are determined. The study then constructs requirements indicators for cultural creative products of Mianzhu New Year picture tourism through statistical analysis. Subsequently, the Analytic Hierarchy Process (AHP) is applied to determine the weights of the cultural creative product requirements indicators. By analyzing and organizing the comprehensive weights of the top 10 requirement indicators, an optimized solution for the redesign of Mianzhu New Year pictures tourism products is obtained.
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Shcherbinina, Yu V. "Why would a book need “pictures”?" Literature at School, n.º 1, 2020 (2020): 89–95. http://dx.doi.org/10.31862/0130-3414-2020-1-89-95.

Texto completo
Resumen
The article deals with the analysis of the functions of book illustration in a historical retrospect – from Antiquity to the present. The purposes and tasks of including images of various types in the book, specificity of visual representation of its contents at the main stages of forming and development of book business is considered. The specificity of visualization of the text content of the book depending on its genre, addressee, and cultural status in different historical periods is traced. Industry specialization, professional approaches, creative strategies of illustrators are described.
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Bakker, Gerben. "How Motion Pictures Industrialized Entertainment". Journal of Economic History 72, n.º 4 (14 de diciembre de 2012): 1036–63. http://dx.doi.org/10.1017/s002205071200068x.

Texto completo
Resumen
Motion pictures constituted a revolutionary new technology that transformed entertainment—a rival, labor-intensive service—into a non-rival commodity. Combining growth accounting with a new output concept shows productivity growth in entertainment surpassed that in any manufacturing industry between 1900 and 1938. Productivity growth in personal services was not stagnant by definition, as current understanding has it, but instead was unparalleled in some cases. Motion pictures’ contribution to aggregate GDP and TFP growth was much smaller than that of general purpose technologies steam, railways, and electricity, but not insignificant. An observer might have noted that “motion pictures are everywhere except in the productivity statistics.”“So long as the number of persons who can be reached by a human voice is strictly limited, it is not very likely that any singer will make an advance on the £10,000 said to have been earned in a season by Mrs. Billington at the beginning of the last century, nearly as great as that which the business leaders of the present generation have made on the last.”1Alfred Marshall
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Liu, Chang Jie, Jia Jing Pi y Sheng Hua Ye. "The Template Matching Research Based on Multiple Images Fusion". Advanced Materials Research 655-657 (enero de 2013): 993–99. http://dx.doi.org/10.4028/www.scientific.net/amr.655-657.993.

Texto completo
Resumen
Visual inspection has been widely used in the field of automobile industry. On a car production line, we use an online monitoring system to measure the same feature region of a work piece. Traditionally one picture is chosen as the template and used for other target measurements. However, this method tends to causing measurement error. In this paper a new algorithm is proposed which can generate a better template by multiple pictures. The process is as following: we firstly match the feature area; secondly, the gray information of this area is segmented; then after optimizing a new template is finally formed. The experimental results show that the NMSD (Normalized Mean Square Difference) is 0.0047 when we use the old template to match 10 pictures, but with the new one, the NMSD is only 0.0005. These results show that the new template is more accurate and stable.
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Mehr, Linda Harris. "Oscar’s very special library: the Margaret Herrick Library of the Academy of Motion Picture Arts and Sciences". Art Libraries Journal 34, n.º 3 (2009): 29–34. http://dx.doi.org/10.1017/s0307472200015996.

Texto completo
Resumen
‘Oscar’ is the best-known symbol of the Academy of Motion Picture Arts and Sciences. But there is more to the Academy than the golden statuette. The Academy’s Margaret Herrick Library, which has been in existence for 80 years, is widely regarded as the pre-eminent research and reference facility for the study of all aspects of motion pictures, as an art form and an industry. The non-circulating research and reference collection, located in Beverly Hills, California, is open to the public, free of charge, and is heavily used by students, scholars, industry personnel, journalists, filmmakers and the general public. Its holdings document the multiple facets of the film industry and its personnel, past and present, and include books, periodicals, clipping files and screenplays, as well as special collections of photographs, manuscripts, posters, graphic art materials, music and recorded sound, and oral histories.
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Tesis sobre el tema "Industry Pictures"

1

Wang, Ting. "Global Hollywood and China's filmed entertainment industry". online access from Digital Dissertation Consortium access full-text, 2006. http://libweb.cityu.edu.hk/cgi-bin/er/db/ddcdiss.pl?3230167.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

McKenzie, Jordi. "An economic analysis of motion pictures in the Australian cinema industry, 1997-2000". Connect to full text, 2005. http://hdl.handle.net/2123/1794.

Texto completo
Resumen
Thesis (Ph. D.)--Discipline of Economics, University of Sydney, [2006?].
Title from title screen (viewed 27th June, 2007). Submitted in fulfilment of the requirements for the degree of Doctor of Philosophy to the Discipline of Economics, University of Sydney. Degree awarded 2006?; thesis submitted 2005. Includes bibliographical references. Also issued in print.
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

司若. "中國電影大片路 = The high concept movies in China". HKBU Institutional Repository, 2007. http://repository.hkbu.edu.hk/etd_ra/799.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Watkins, Jessica. "From fallen women to risen heroines representations of gender and sexuality in American film, 1929-1942 /". Huntington, WV : [Marshall University Libraries], 2005. http://www.marshall.edu/etd/descript.asp?ref=539.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Niemand, Ella Catharina. "Reinventing cinema a perspective on the implications of the Internet on the cinema industry /". Diss., Pretoria : [s.n.], 2003. http://upetd.up.ac.za/thesis/available/etd-11082004-134651/.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Ryu, Jae Hyung. "Reality & effect a cultural history of visual effects /". unrestricted, 2006. http://etd.gsu.edu/theses/available/etd-03292007-172937/.

Texto completo
Resumen
Thesis (Ph. D.)--Georgia State University, 2006.
Title from file title page. Ted Friedman, committee chair; Kathy Fuller-Seeley, Angelo Restivo, Jung-Bong Choi, Alisa Perren, committee members. Electronic text (249 p.) : digital, PDF file. Description based on contents viewed Oct. 29, 2007. Includes bibliographical references (p. 236-249).
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Falicov, Tamara Leah. "The contemporary Argentine film industry, 1983-1998 : state cultural policy within a global market /". Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 1999. http://wwwlib.umi.com/cr/ucsd/fullcit?p9956448.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Huggett, Nancy. "A cultural history of cinema-going in the Illawarra (1900-50)". Connect to this title online, 2002. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20050317.111523/.

Texto completo
Resumen
Thesis (Ph. D.)--University of Wollongong, 2002.
Title from PDF title page (viewed on Aug. 14, 2005). Ill. in print version lacking in electronic version. Includes bibliographical references (p. 285-301).
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Carter, Sandra Gayle. "Moroccan cinema : what Moroccan cinema? /". Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Gunckel, Colin. ""A theater worthy of our race" the exhibition and reception of Spanish language film in Los Angeles, 1911-1942 /". Diss., Restricted to subscribing institutions, 2009. http://proquest.umi.com/pqdweb?did=1997008061&sid=1&Fmt=2&clientId=1564&RQT=309&VName=PQD.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Libros sobre el tema "Industry Pictures"

1

Dondureĭ, D. B. Russian film industry, 2001-2006. Moskva: STS Media, 2006.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Great Britain. Parliament. House of Commons. National Heritage Committee. The British film industry. London: HMSO, 1995.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Great Britain. Parliament. House of Commons. National Heritage Committee. The British film industry. London: HMSO, 1995.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Loader, Jayne. Between pictures. New York: Grove Press, 1987.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Canada. Industry, Science and Technology Canada. Motion pictures. Ottawa, Ont: Industry, Science and Technology Canada, 1991.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Canada. Industry, Science and Technology Canada. Motion pictures. Ottawa, Ont: Industry, Science and Technology Canada, 1988.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Cones, John W. Motion pictures: A complete guide to the industry. New York: Peter Lang, 2008.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

1963-, McDonald Paul y Wasko Janet, eds. The contemporary Hollywood film industry. Malden, MA: Blackwell Pub., 2008.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Producing Bollywood: Inside the contemporary Hindi film industry. Durham: Duke University Press, 2012.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Spencer, Michael. Hollywood North: Creating the Canadian motion picture industry. Montréal, QC: Cantos International, 2003.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Capítulos de libros sobre el tema "Industry Pictures"

1

Reisinger, Gerhard, Philipp Hold y Wilfried Sihn. "Automated Information Supply of Worker Guidance Systems in Smart Assembly Environment". En IFIP Advances in Information and Communication Technology, 235–48. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72632-4_17.

Texto completo
Resumen
AbstractThe global megatrends of digitization and individualization substantially affect manufacturing enterprises. Assembly workers are exposed to increased process complexity resulting in physical and cognitive workload. Worker guidance systems (WGS) are used to overcome this challenge through output of information regarding what should be done, how it should be done and why it should be done. An unsolved scientific challenge in this context is efficient information supply of WGS. Information such as worker’s instruction texts, pictures or 3D representations are created by employees of the work preparation department and transferred to the WGS. Manual information supply is a time-consuming and complex process, which requires a high (non-value-adding) effort as well as comprehensive knowledge in handling 3D CAD modelling and software programming. This paper presents a novel approach to reduce the required manual effort in information supply process. A knowledge-based model is proposed that enables an automated information supply of WGS in smart assembly environment by means of algorithms and self-learning expert systems, which pursues a holistic and consistent approach without media breaks. The automated approach assists employees of work preparation department, which means they can concentrate on their essential core competencies instead of being busy, for example, creating assembly plans, instruction texts or pictures for individual WGS. Finally, the technical implementation as a software-based proof-of-concept demonstrator and sub-sequent integration into the IT environment of TU Wien Pilot Factory Industry 4.0 is outlined.
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Stark, Rainer. "The Big Picture—Information Technology in Enterprises". En Virtual Product Creation in Industry, 13–41. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. http://dx.doi.org/10.1007/978-3-662-64301-3_3.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Kumb, Florian. "Literature Review on the Motion Picture Industry". En Local Movie Supply in the German Motion Picture Industry, 23–47. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-20685-7_3.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Eckhardt, Ulrich y Gerd Maderlechner. "Topological Algorithms in Picture Processing". En Proceedings of the Fifth European Conference on Mathematics in Industry, 209–12. Wiesbaden: Vieweg+Teubner Verlag, 1991. http://dx.doi.org/10.1007/978-3-663-01312-9_35.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Murray, Patrick. "Beyond the ‘Commerce and Industry’ Picture of Capital". En The Circulation of Capital, 33–66. London: Palgrave Macmillan UK, 1998. http://dx.doi.org/10.1007/978-1-349-14319-1_3.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Tucker, April. "Sound for Picture (Broadcast, Production, and Post-Production)". En Finding Your Career in the Modern Audio Industry, 358–86. London: Focal Press, 2022. http://dx.doi.org/10.4324/9781003050346-19.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Hofmann, Kay H. "Contemporary Co-Financing Practices in the Motion Picture Industry". En Co-Financing Hollywood Film Productions with Outside Investors, 41–54. Wiesbaden: Springer Fachmedien Wiesbaden, 2012. http://dx.doi.org/10.1007/978-3-658-00787-4_3.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Kumb, Florian. "Introduction". En Local Movie Supply in the German Motion Picture Industry, 1–7. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-20685-7_1.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Kumb, Florian. "Theoretical Background". En Local Movie Supply in the German Motion Picture Industry, 9–21. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-20685-7_2.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Kumb, Florian. "The Influence of Supply Drivers". En Local Movie Supply in the German Motion Picture Industry, 49–79. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-20685-7_4.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.

Actas de conferencias sobre el tema "Industry Pictures"

1

Xiaoou, Huang y Lu Yufen. "The Current Situation and Future of Thermal Spraying Industry in China". En ITSC2004, editado por Basil R. Marple y Christian Moreau. ASM International, 2004. http://dx.doi.org/10.31399/asm.cp.itsc2004p0036.

Texto completo
Resumen
Abstract The author carried out in 2003 a multiclient survey and research covering thermal spraying industry in China. This work mainly focus on the productive level and scale of thermal spraying equipment and materials, application and coating job shop, R&D in universities and institutes as well as the develop trends of thermal spraying industry in China. This presentation intends to provide general pictures on thermal spraying industry in China, by offering data and analysis, forecasts the future of thermal spraying in China.
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Dues, Joseph Francis. "Connecting With Industry". En ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42489.

Texto completo
Resumen
In an era of tight budgets, Universities must plan their capital spending on lab equipment carefully. This process is even more critical for smaller colleges and satellite locations. To address the problem of a limited budget for lab equipment but a strong need for expanded labs to meet minimum course requirements, faculty contacted local industry to ask for help. The Mechanical Engineering Technology department includes a metallography lab as one of its core learning objectives in the freshman level Materials I course. The metallography lab consists of mounting, grinding, polishing and etching a metallographic specimen to identify features of the specimen’s microstructure. Unfortunately, lab equipment was not available for these tasks at one of the University’s satellite locations. However, through contacts with the school’s Industrial Advisory Board, a local company offered to host the laboratory and allow students to use its metallography facility. Conforma Clad, in New Albany, IN, applies very hard coatings to protect metal surfaces subject to wear and abrasion. For quality control purposes, they perform metallographic examinations of the applied coatings. Conforma Clad engineers demonstrated the preparation of the metallographic specimens and the analysis of their microstructure and then let students prepare and view their own specimens. This experiment showed the students the procedures and equipment needed to create pictures of a metal’s microstructure. By preparing the samples themselves, they gained an appreciation of the skill and technique required to successfully view the microstructure. This paper describes the collaboration the MET faculty used to add laboratory experiments without capital expenditures by connecting with local industry. Students benefited by gaining access to the operations and facilities of a local company as well as the knowledge gained by performing the metallography lab. The paper concludes with an evaluation of the experience and the improvements planned for the coming year.
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Paltrinieri, Nicola, Gabriele Landucci y Pierluigi Salvo Rossi. "Real-Time Data for Risk Assessment in the Offshore Oil and Gas Industry". En ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/omae2017-61486.

Texto completo
Resumen
Recent major accidents in the offshore oil and gas (O&G) industry have showed inadequate assessment of system risk and demonstrated the need to improve risk analysis. While direct causes often differ, the failure to update risk evaluation on the basis of system changes/modifications has been a recurring problem. Risk is traditionally defined as a measure of the accident likelihood and the magnitude of loss, usually assessed as damage to people, to the environment, and/or economic loss. Recent revisions of such definition include also aspects of uncertainty. However, Quantitative Risk Assessment (QRA) in the offshore O&G industry is based on consolidated procedures and methods, where periodic evaluation and update of risk is not commonly carried out. Several methodologies were recently developed for dynamic risk analysis of the offshore O&G industry. Dynamic fault trees, Markov chain models for the life-cycle analysis, and Weibull failure analysis may be used for dynamic frequency evaluation and risk assessment update. Moreover, dynamic risk assessment methods were developed in order to evaluate the risk by updating initial failure probabilities of events (causes) and safety barriers as new information are made available. However, the mentioned techniques are not widely applied in the common O&G offshore practice due to several reasons, among which their complexity has a primary role. More intuitive approaches focusing on a selected number of critical factors have also been suggested, such as the Risk Barometer or the TEC2O. Such techniques are based on the evaluation of technical, operational and organizational factors. The methodology allows supporting periodic update of QRA by collecting and aggregating a set of indicators. However, their effectiveness relies on continuous monitoring activity and realtime data capturing. For this reason, this contribution focuses on the coupling of such methods with sensors of different nature located in or around and offshore O&G system. The inheritance from the Centre for Integrated Operations in the Petroleum Industries represents the basis of such study. Such approach may be beneficial for several cases in which (quasi) real-time risk evaluation may support critical operations. Two representative cases have been described: i) erosion and corrosion issues due to sand production; and ii) oil production in environmental sensitive areas. In both the cases, dynamic risk analysis may employ real-time data provided by sand, corrosion and leak detectors. A simulation of dynamic risk analysis has demonstrated how the variation of such data can affect the overall risk picture. In fact, this risk assessment approach has not only the capability to continuously iterate and outline improved system risk pictures, but it can also compare its results with sensor-measured data and allow for calibration. This can potentially guarantee progressive improvement of the method reliability for appropriate support to safety-critical decisions.
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Champ, Pascal, Jacques Bardet y Benjamin Attias. "Industrial Scale HL-LL Waste Canister Transfer Demonstrator". En ASME 2011 14th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2011. http://dx.doi.org/10.1115/icem2011-59305.

Texto completo
Resumen
In 2007, Cegelec has been attributed a contract by ANDRA under the ESDRED program (Engineering Studies and Demonstrations of Repository Designs) financed by 13 organisations across Europe, for the design, manufacturing and trial test of a full scale industrial demonstrator of HL-LL waste canister transfer system. Completed in 2009, this project gives a good synthesis of solutions the industry can offer in order to manage HLW transportation with regard to deep geological disposal. This paper highlights solutions developed and results achieved with numerous pictures of the actual system.
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Liu, Chin Kai, Chi Jen. Chen, Jeh Yan.Chiou y David Su. "A Methodology to Reduce Ion Beam Induced Damage in TEM Specimens Prepared by FIB". En ISTFA 2002. ASM International, 2002. http://dx.doi.org/10.31399/asm.cp.istfa2002p0313.

Texto completo
Resumen
Abstract Focused ion beam (FIB) has become a useful tool in the Integrated Circuit (IC) industry, It is playing an important role in Failure Analysis (FA), circuit repair and Transmission Electron Microscopy (TEM) specimen preparation. In particular, preparation of TEM samples using FIB has become popular within the last ten years [1]; the progress in this field is well documented. Given the usefulness of FIB, “Artifact” however is a very sensitive issue in TEM inspections. The ability to identify those artifacts in TEM analysis is an important as to understanding the significance of pictures In this paper, we will describe how to measure the damages introduced by FIB sample preparation and introduce a better way to prevent such kind of artifacts.
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Stutius, W. y L. Heath. "High power lasers for medical and graphic arts printing applications". En Semiconductor Lasers: Advanced Devices and Applications. Washington, D.C.: Optica Publishing Group, 1995. http://dx.doi.org/10.1364/slada.1995.mc.1.

Texto completo
Resumen
Ecological concerns and time and cost saving measures have started a trend towards dry-processed, high quality image recording media for digital medical and graphic arts imaging applications. As compared to silver-halide film based systems, the photosensitive layers in most of these media are considerably less sensitive than traditional wet-processed film and therefore require a high laser power for exposure. In addition, advanced screening methods, like FM or stochastic screening, require an extremely well controlled laser spot size. The most recent developments in the graphic arts industry are directed towards eliminating film as an intermediate step for plate-making altogether and instead writing the image (comprising text, line art and pictures) directly onto plates. What these technological developments have in common is that, independent of the specific method for implementation, they all rely on various high power laser sources with extremely well controlled beam properties for writing the image. This talk will address the present status of laser requirements for non-silver-halide-based medical and graphic arts printing, as well as impending industry-wide technological changes and the resulting “wish list” for advanced laser sources.
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Salonen, Jarno, Tatu Niskanen y Pia Raitio. "How to Enhance the Sharing of Cyber Incident Information via Fine-Grained Access Control". En 3rd International Conference on Data Mining and Machine Learning (DMML 2022). Academy and Industry Research Collaboration Center (AIRCC), 2022. http://dx.doi.org/10.5121/csit.2022.120717.

Texto completo
Resumen
Industry 4.0 and the ongoing digital transformation along with a large number interconnected machines anddevices increase the role of cybersecurity, cyber incident handling and incident response in the factories of the future (FoF). Cyber incident information sharing plays a major role when we need to formulate situational pictures about FoF operations and environment, and respond to cybersecurity threats related to e.g. the implementation of novel technologies. Sharing of incident information has a major drawback since it may reveal too much about the attack target, e.g. in the case of legacy systems and therefore restrictions may apply. We have developed a proof-of-concept service that combines access control and encryption of data at high granularity and a mechanism for requesting access to restricted cyber incident information. Theobjective was to demonstrate how access to restricted incident data fields could be managed in a fine-grained manner to enhance information sharing.
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Rajan, Pramod, P. K. Raju y Chetan S. Sankar. "Experiences of a US-India Team in Developing a Case Study That Illustrates Technical and Global Issues in Weld Design". En ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-50132.

Texto completo
Resumen
Understanding the real-world issues in the global industry is one of the ways of enhancing the learning experience of engineering students. This paper describes such an experience. This was a collaborative weld design project between Auburn University, Auburn, Alabama, Indian Institute of Technology (IIT), Madras, India and Bharat Heavy Electricals Limited (BHEL), Tiruchirappalli, India. The main problems BHEL faced were (1) Inspection time of the welds, (2) Inaccessibility of the welds, and (3) Detection of kissing bond or pasty weld. Three possible solutions to these problems were identified by the practitioners. In order to bring this real-world issue into engineering classrooms, the authors developed a case study. The authors also developed a multimedia CD-ROM which brings the problem live into class rooms using video, audio and pictures. This case study has been tested with mechanical engineering students. The majority of the students found the use of case studies to be beneficial, particularly because of the group work and applicability to real life situations. The details of the case study and its implementation in an engineering class room at Auburn University are discussed in the paper.
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Wu, Bin, Guoheng Chen, John Moreland, Dui Huang, Dezhi Zheng y Chenn Q. Zhou. "Industrial Application of CFD Simulation and VR Visualization". En ASME 2010 World Conference on Innovative Virtual Reality. ASMEDC, 2010. http://dx.doi.org/10.1115/winvr2010-3734.

Texto completo
Resumen
The petroleum refining industry involves many capital and energy intensive processes. Due to complex phenomena and the difficulties in taking measurements, the knowledge needed for process optimization can be most readily obtained through the development of high fidelity computational fluid dynamics (CFD) numerical simulations. CFD has become a powerful simulation technology used in industrial process design and optimization for productivity enhancement, energy efficiency optimization, environmental management, and quality assurance. With increasingly complex CFD capable of simulating and analyzing ever-larger amounts of data, interpolating and presenting the numerical data in a meaningful fashion is a key for effective communication between CFD experts and plant engineers. Traditionally, CFD experts frequently develop two-dimensional pictures and animate their results to help make the information easily digestible. Recently, virtual reality (VR) technology made it possible for people to analyze huge amounts of CFD data in a virtual environment. VR creates a computer-generated world in which people who are not analysis experts can see the results in a context that they can easily understand. Even people who are familiar with interpreting analysis results can gain insights that make it possible to understand the root causes of observed problems and plan design changes in much less time. The integration of CFD with VR is a growing and emerging research field which can provide virtual engineering (VE) systems. In the present study, several VE applications in the petroleum refining industry have been discussed. The VE environment has greatly enhanced the value of CFD simulations and allows engineers to gain much needed process insights in order to make sound engineering decisions.
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Aoshima, Kenichi, Hidekazu Kinjo, Kenji Machida, Daisuke Kato, Kiyoshi Kuga, Tomoyuki Mishina, Hiroshi Kikuchi y Naoki Shimidzu. "Three dimensional motion picture technologies". En 2014 IEEE Industry Applications Society Annual Meeting. IEEE, 2014. http://dx.doi.org/10.1109/ias.2014.6978440.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.

Informes sobre el tema "Industry Pictures"

1

Webb, Philip. Unsettled Issues on the Viability and Cost-Effectiveness of Automation in Aerospace Manufacturing. SAE International, febrero de 2021. http://dx.doi.org/10.4271/epr2021005.

Texto completo
Resumen
The aerospace manufacturing industry is, in many ways, one of the most sophisticated commercial manufacturing systems in existence. It uses cutting-edge materials to build highly complex, safety-critical structures and parts. However, it still relies largely upon human skill and dexterity during assembly. There are increasing efforts to introduce automation, but uptake is still relatively low. Why is this and what needs to be done? Some may point to part size or the need for accuracy. However, as with any complex issue, the problems are multifactorial. There are no right or wrong answers to the automation conundrum and indeed there are many contradictions and unsettled aspects still to be resolved. Unsettled Issues on the Viability and Cost-Effectiveness of Automation in Aerospace Manufacturing builds a comprehensive picture of industry views and attitudes backed by technical analysis to answer some of the most pressing questions facing robotic aerospace manufacturing.
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Fisbhen, Marco, Victor Sahate y Augusto Duarte. How Disruptive Innovators Prepare Today's Students to Be Tomorrow's Workforce?: Descomplica and Effective Remote Learning. Inter-American Development Bank, diciembre de 2020. http://dx.doi.org/10.18235/0002962.

Texto completo
Resumen
In Brazil, income and race impact on standardized test grades. Standardized test grades are the sole criterion for access to most public universities, or the top higher education institutions. In response, the whole university preparation industry has emerged to cater to students from high-income families, rigging the selection process and perpetuating inequality. This paper aims to describe typical university admissions systems in Brazil to demonstrate how Descomplica is changing the odds of thousands of underprivileged students. With a clear picture of how this system caters to the more privileged, we introduce Descomplica, its tools and learning methodology, and the significant improvements it brings to students, who would not have a hope of joining quality higher education institutions in Brazil otherwise. Finally, the paper discusses the potential impacts and replicability for similar innovation elsewhere in the Americas to help decision-makers in the region especially when lockdowns and curfews are necessary, such as the COVID-19 pandemic.
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Stankovic, Mirjana y Agustín Ignacio Filippo. Global Value Chain Data for Mexico in the Automotive and Electronics Sectors. Inter-American Development Bank, septiembre de 2021. http://dx.doi.org/10.18235/0003664.

Texto completo
Resumen
This report uses the Global Value Chain (GVC) data framework to provide scoping review and analysis of Mexico's current position and potential for using and harvesting GVC data in the automotive and electronics sectors. By conducting the study on GVCs data, we hope to broaden the understanding of the importance of data transfers for GVCs, production, and trade, underlining that data are critical to all companies and not only to the so-called "high-tech companies." Data protection, sharing, and security are also central to manufacturers in the automotive and electronics sectors. This report will review how datafication, data protection, sharing, and security impact Mexico's automotive and electronics industry. This information is analyzed from a global perspective and the viewpoint of Mexico to provide a holistic picture of the situation when identifying trajectories for entry, growth, and upgrading along GVCs that rely on datafication and digital transformation. It will also offer recommendations for regulators and policymakers on how to facilitate successful GVCs' data functioning and guidance for businesses on how to harvest data for growth and digital transformation.
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Webb, Philip y Sarah Fletcher. Unsettled Issues on Human-Robot Collaboration and Automation in Aerospace Manufacturing. SAE International, noviembre de 2020. http://dx.doi.org/10.4271/epr2020024.

Texto completo
Resumen
This SAE EDGE™ Research Report builds a comprehensive picture of the current state-of-the-art of human-robot applications, identifying key issues to unlock the technology’s potential. It brings together views of recognized thought leaders to understand and deconstruct the myths and realities of human- robot collaboration, and how it could eventually have the impact envisaged by many. Current thinking suggests that the emerging technology of human-robot collaboration provides an ideal solution, combining the flexibility and skill of human operators with the precision, repeatability, and reliability of robots. Yet, the topic tends to generate intense reactions ranging from a “brave new future” for aircraft manufacturing and assembly, to workers living in fear of a robot invasion and lost jobs. It is widely acknowledged that the application of robotics and automation in aerospace manufacturing is significantly lower than might be expected. Reasons include product variability, size, design philosophy, and relatively low volumes. Also, the occasional reticence due to a history of past false starts plays a role too. Unsettled Issues on Human-Robot Collaboration and Automation in Aerospace Manufacturing goes deep into the core questions that really matter so the necessary step changes can move the industry forward.
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Oltarzhevskyi, Dmytro. HISTORICAL FEATURES OF CORPORATE MEDIA FORMATION IN UKRAINE AND IN THE WORLD. Ivan Franko National University of Lviv, febrero de 2021. http://dx.doi.org/10.30970/vjo.2021.49.11067.

Texto completo
Resumen
The article examines the world and Ukrainian history of corporate periodicals. The main purpose of this study is to reproduce an objective global picture of the emergence and formation of corporate periodicals, taking into account the business and socio-economic context. Accordingly, its tasks are to compare the conditions and features of corporate media genesis in different countries, to determine the main factors of their development, as well as to clarify the transformations of the terminological apparatus. The research is based on mostly foreign secondary scientific works published from 1915 to the present time. The literature was studied using methods such as overview, historical, functional and thematic analysis, description, and generalization. A systematic approach was used to determine the role and place of each element in the system, as well as to comprehensively consider the object in the general historical context and within the current scientific discourse. The method of systematization made it possible to establish internal and external connections, patterns and contradictions in the development of the object of study. The main historical milestones on this path are identified, examples of the first successful corporate publications and their contribution to business development, public relations, and corporate communications are considered. It was found that corporate media emerged in the mid-nineteenth century spontaneously, on the wave of practical business needs in response to industrialization, company increase, staff growth, and consumer market development. Their appearance preceded the formation of the public relations industry and changed the structure of the information space. The scientific significance of this research is that the historical look at the evolution of corporate media provides an understanding of their place, influence, capabilities, and growing communicative role in the digital age.
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Lee, Wall y Burch. L52333 NDE and Inspection Techniques Applied to Composite Wrap Repairs. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), junio de 2012. http://dx.doi.org/10.55274/r0010468.

Texto completo
Resumen
The objective includes: Assess commercially available inspection methods to validate integrity of composite repair systems. Identify applicability to inspect composite overwrap and parent metal for both onshore and sub-sea pipelines (where information is available). Identify sources of data to include other users of composite materials(aerospace/aircraft, naval/ship repairs). Identify procedures and technologies to assess inspection effectiveness and provide a gap analysis. Interface with other PRCI projects on long-term testing of composite repairs and other joint industry projects on composite repairs to improve our understanding of long term durability of repairs. Identify global experience with composite repairs; not just North America. For general wall loss, radiography or electromagnetic techniques appear to be the best candidates. Standard radiography techniques can detect changes in wall thickness over a large area. Saturated low frequency systems, e.g. SLOFEC are good for a quick rapid scan of the area of interest. Pulsed eddy current, e.g. PEC, is also available for a general survey of the underlying substrate. For pinhole leaks, the electromagnetic techniques do not have sufficient resolution to detect defects of order 20 mm (0.8 in.) diameter and less. Standard radiography techniques can detect pinhole leaks down to diameters of 3 mm (0.12 in.) or less. Tangential radiography techniques are generally good for defect sizing but there are practical limitations with chord length (i.e. beam path through the pipe wall). Ultrasonic techniques could offer a potential solution but is currently limited due to the high attenuation of the composite repair material where through the repair inspection could only detect large diameter defects greater than 25 mm (1 in.) diameter on thin repairs less than 5 mm (0.2 in.). Detecting pin hole defects by applying the ultrasound along the axial direction of the substrate, effectively skipping the ultrasound under the repair, showed more promise. For delamination or debonding of the interface between the composite laminate and the steel substrate, laser shearography and microwave inspection appear to offer the best solution. Currently there is no single inspection technique that can be applied with confidence to the inspection of interfacial delaminations. Further developments are on-going to provide a solution to this challenging inspection problem. Acoustic emission is able to give an overall picture of the damage within the composite under live loads. It can be used as a QA tool to test the integrity of the repair. However, it is difficult to interpret the signals to gain any quantitative information about a particular defect.
Los estilos APA, Harvard, Vancouver, ISO, etc.
También puede estar interesado en las bibliografías ampliadas sobre el tema "Industry Pictures" para tipos de fuentes particulares:
Artículos de revistas Tesis Libros
Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!

Pasar a la bibliografía