Literatura académica sobre el tema "High strain-rates tests"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "High strain-rates tests".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "High strain-rates tests"
Piao, Ming Jun, Hoon Huh y Ik Jin Lee. "Characterization of Hardening Behavior at Ultra-High Strain Rate, Large Strain, and High Temperature". Key Engineering Materials 725 (diciembre de 2016): 138–42. http://dx.doi.org/10.4028/www.scientific.net/kem.725.138.
Texto completoCadoni, Ezio, George Solomos y Carlo Albertini. "Concrete behaviour in direct tension tests at high strain rates". Magazine of Concrete Research 65, n.º 11 (junio de 2013): 660–72. http://dx.doi.org/10.1680/macr.12.00175.
Texto completoYounes, Ayham, Vignaesh Sankaran, André Seidel, Martin Waldmann, Chokri Cherif y Jan Hausding. "Stress-strain behavior of carbon filament yarns under high strain rates". Textile Research Journal 82, n.º 7 (13 de febrero de 2012): 685–99. http://dx.doi.org/10.1177/0040517511433151.
Texto completoMentl, Vaclav y Josef Bystricky. "Compression Tests of High Strength Steels". Advanced Materials Research 59 (diciembre de 2008): 293–98. http://dx.doi.org/10.4028/www.scientific.net/amr.59.293.
Texto completoPark, Chung Hee, Seh Wan Jeong, Hoon Huh y Jung Su Park. "Material Behaviors of PBX Simulant with Various Strain Rates". Key Engineering Materials 535-536 (enero de 2013): 117–20. http://dx.doi.org/10.4028/www.scientific.net/kem.535-536.117.
Texto completoSingh, Nilamber Kumar, Ezio Cadoni, Maloy K. Singha y Narinder K. Gupta. "Mechanical Behavior of Advanced High Strength Steel at High Strain Rates". Applied Mechanics and Materials 82 (julio de 2011): 178–83. http://dx.doi.org/10.4028/www.scientific.net/amm.82.178.
Texto completoMeyer, Lothar W., Shawky Abdel-Malek y Norman Herzig. "Experimental Methods for Characterizing of Sheet Metals at High Strain Rates". Key Engineering Materials 473 (marzo de 2011): 474–81. http://dx.doi.org/10.4028/www.scientific.net/kem.473.474.
Texto completoPiao, Ming Jun, Chung Hee Park, Hoon Huh y Ik Jin Lee. "Validation of Dynamic Hardening Models with Taylor Impact Tests at High Strain Rates". Key Engineering Materials 626 (agosto de 2014): 389–96. http://dx.doi.org/10.4028/www.scientific.net/kem.626.389.
Texto completoLei, S., Y. C. Shin y F. P. Incropera. "Material Constitutive Modeling Under High Strain Rates and Temperatures Through Orthogonal Machining Tests". Journal of Manufacturing Science and Engineering 121, n.º 4 (1 de noviembre de 1999): 577–85. http://dx.doi.org/10.1115/1.2833062.
Texto completoRey-de-Pedraza, V., F. Gálvez y D. Cendón Franco. "Measurement of fracture energy of concrete at high strain rates". EPJ Web of Conferences 183 (2018): 02065. http://dx.doi.org/10.1051/epjconf/201818302065.
Texto completoTesis sobre el tema "High strain-rates tests"
Walker, A. G. "Mechanical behaviour of copper at high strain rates". Thesis, Loughborough University, 1987. https://dspace.lboro.ac.uk/2134/10949.
Texto completoShen, Yubin. "The chemical and mechanical behaviors of polymer / reactive metal systems under high strain rates". Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45804.
Texto completoRuiz, Daniel John. "Mechanical behaviour of materials at high rates of strain : a study of the double notch shear test". Thesis, University of Oxford, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.280611.
Texto completoTodesco, Sérgio Roberto. "Projeto e construção de um dispositivo para ensaio de impacto em materiais, barra de compressão". Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-13032018-103518/.
Texto completoThis dissertation presents a design of a device to collect characteristic data of materials submitted to the high strain rates, device that takes the name of its idealizer the English engineer Sir Bertram Hopkinson. More specifically, this dissertation is inseparably linked to the development of a package for the transport of radioactive elements as part of the general scope of a CAPES project in partnership with the Materials Science and Technology Center (CCTM), Nuclear and Energy Research Institute IPEN - CNEN / SP, autarchy associated with the University of São Paulo. The development of the device is part of the scope of procurement, and collection of data required for the design, and the construction of the packaging. This dissertation deals with the mechanical design of the device, important, divided into two parts, dimensioning of the bars, which would be the impact bar, the input and output bars and the design of the impact device. The sizing of the bars involves knowledge of the concept of elastic waves in solid media so that the length of the bars is estimated in order to serve as a guide for the elastic waves, which will cause deformation in the test body, and enable a good reading of these waves for analysis of the data. The impact device has to be robust enough to produce the stress wave that deforms the test body but not to deform the bars plastically, which will have to continue throughout the test within the elastic regime.
Lee, Chih-Chun y 李季春. "A Study on Material Tests in High Strain Rates". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/32824664376501112901.
Texto completo國立臺灣大學
機械工程學研究所
97
The finite element method has been widely applied to simulate the crashworthiness tests in the automotive industry. However, in the high strain-rate deformation, the yield strength and ultimate tensile strength of a material may be changed. In order to obtain accurate results, the stress-strain relations of the material in high strain rates are required for the simulations of the crashworthiness tests. There are various high strain-rate tests available to obtain the stress-strain relations, such as the split Hopkinson bar system, direct impact method, and servo hydraulic system. Each test method is applicable in certain strain-rate range. In the present study, the servo hydraulic system MTS819 was adopted to implement the high rate tests in a strain-rate range below 500s-1. The testing equipment including the machine frame, load cell, and data acquisition system was fine tuned first to make it suitable for the tests. As strain rate increasing, the amplitude of the stress vibration acquired from load cell increases. Hence, the efforts to determine the cause of the stress vibration and the remedy approaches were made. The actual strain rate measured in specimen during the test was considered. It was found that there is an acceleration zone in the beginning of the test. So it is important to determine when the strain rate comes to a constant strain rate. The stress-strain curves acquired from the experiments conducted in the present study were fitted by the Cowper-Symonds equation and then input to the finite element software for simulations. Through the finite element simulations, the actual strain rates in specimen and stress distributions in the grip during experiment were investigated. The finite element simulations were also performed to examine the strain rate effect on the impact of a hydro-formed engine cradle to a rigid wall. The experimental approach and the finite element simulations results obtained in the present study could be valuable references for the future researches in field of deformation on the high strain rates.
Pires, Tiago Leonel Marques Carmona Afonso. "Barra de Pressão de Hopkinson". Master's thesis, 2016. http://hdl.handle.net/10400.26/15072.
Texto completoNowadays, for the realization of any project it’s necessary to make an accurate choice of the materials that are going to be used, and for that you need to know how they behave before the various factors present. These behaviors are usually studied in destructive tests at high strain rate, such as the system of the Split Hopkinson Pressure Bar. This works aims to create a design of a Split Hopkinson Pressure Bar to be built in the laboratory of the Department of Science and Technology of the Portuguese Naval Academy, so that the future Cadets of the Naval Engineering Class of the Mechanical Branch can perform tests and study the behavior of the material in high strain rates. In this Dissertation is explained the whole theory behind the system of a Split Hopkinson Pressure Bar and all the steps that were taken to the creation of design, in order to simplify the best possible way, all physics that is behind this system, in order to facilitate the reading
Capítulos de libros sobre el tema "High strain-rates tests"
Kwon, J. B., H. Huh y C. N. Ahn. "An Improved Technique for Reducing the Load Ringing Phenomenon in Tensile Tests at High Strain Rates". En Dynamic Behavior of Materials, Volume 1, 253–57. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-22452-7_35.
Texto completoWolff, C. y A. R. Bunsell. "Testing of Composites at High Strain Rates Using ± 45° Shear Test". En Developments in the Science and Technology of Composite Materials, 653–58. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0787-4_90.
Texto completoEl-Magd, E. y M. Abouridouane. "Compression Test on Magnesium Alloy MgAl8Zn at High Strain Rates and Temperatures". En Magnesium Alloys and their Applications, 324–29. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607552.ch51.
Texto completoFletcher, Lloyd y Fabrice Pierron. "A Simple Data-Rich IBII Test for Identifying All Orthotropic Stiffness Components at High Strain Rates". En Dynamic Behavior of Materials, Volume 1, 53–56. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-86562-7_9.
Texto completoLok, T. S., X. B. Li, P. J. Zhao, D. S. Liu, S. R. Lan y G. H. Yeo. "Uniaxial compression tests on granite and its complete stress-strain relationship at high strain rates". En Frontiers of Rock Mechanics and Sustainable Development in the 21st Century, 85–87. CRC Press, 2020. http://dx.doi.org/10.1201/9781003077510-17.
Texto completoZhang, Weigang, Changming Xie, Xi Wei y Min Ge. "C/C-ZrB2-ZrC-SiC Composite Derived from Polymeric Precursor Infiltration and Pyrolysis". En MAX Phases and Ultra-High Temperature Ceramics for Extreme Environments, 435–59. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-4066-5.ch014.
Texto completoBrara, Ahmed. "Critical Infrastructure: Design and Behavior of Materials Under Impact and Explosion Loads". En Critical Energy Infrastructure Protection. IOS Press, 2022. http://dx.doi.org/10.3233/nicsp220004.
Texto completo"Propagated Fish in Resource Management". En Propagated Fish in Resource Management, editado por JOSEPH R. KOZFKAY, DANIEL J. SCHILL y DAVID M. TEUSCHER. American Fisheries Society, 2004. http://dx.doi.org/10.47886/9781888569698.ch41.
Texto completoActas de conferencias sobre el tema "High strain-rates tests"
Lei, Shuting, Yung C. Shin y Frank P. Incropera. "Material Constitutive Modeling Under High Strain Rates and Temperatures Through Orthogonal Machining Tests". En ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-1140.
Texto completoLall, Pradeep, Sandeep Shantaram, Mandar Kulkarni, Geeta Limaye y Jeff Suhling. "Constitutive Behavior of SAC Leadfree Alloys at High Strain Rates". En ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/ipack2011-52194.
Texto completoQin Fei, An Tong y Chen Na. "Dynamic behavior tests of lead-free solders at high strain rates by the SHPB technique". En 2008 International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP). IEEE, 2008. http://dx.doi.org/10.1109/icept.2008.4607060.
Texto completoLall, Pradeep, Sandeep Shantaram, Jeff Suhling y David Locker. "Mechanical Behavior of Sn1Ag0.5Cu and Sn3Ag0.5Cu Alloys at High Strain Rates". En ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-93059.
Texto completoLall, Pradeep, Di Zhang y Vikas Yadav. "High Strain-Rate Constitutive Behavior of SAC305 Solder During Operation at High Temperature". En ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-39518.
Texto completoWest, Ashby, Garrett Venable, Michael Flanagan, Evan Harris, Brad G. Davis, F. Todd Davidson y Joseph Hanus. "Constitutive Modeling and Validation of Sintered Metal Powders Subjected to Large Strains and High Strain Rates". En ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-71461.
Texto completoMunson, Douglas, Timothy M. Adams y Shawn Nickholds. "Determination of Tensile Elastic Modulus in High Density Polyethylene Piping at Seismic Strain Rates". En ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78777.
Texto completoHojjati, Reza, Matthias Steinhoff, Steven Cooreman, Filip Van den Abeele y Patricia Verleysen. "Effects of High Strain Rates on Ductile Slant Fracture Behaviour of Pipeline Steel: Experiments and Modelling". En 2016 11th International Pipeline Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/ipc2016-64332.
Texto completoSohoni, G. S., M. V. Walame, V. Tandon, R. S. Mahajan y S. Raju. "Dynamic Behavior Characterization of Lead at High Strain Rates Using High Speed Photography for Finite Element Simulation". En ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82693.
Texto completoIsakov, Matti, Jeremy Seidt, Kauko O¨stman, Amos Gilat y Veli-Tapani Kuokkala. "Characterization of a Ferritic Stainless Sheet Steel in Simple Shear and Uniaxial Tension at Different Strain Rates". En ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63141.
Texto completoInformes sobre el tema "High strain-rates tests"
Cox, Bradley. Fiber Bragg Grating validation tests to measure high-strain rates at elevated temperatures. Office of Scientific and Technical Information (OSTI), septiembre de 2015. http://dx.doi.org/10.2172/1215806.
Texto completoTENSILE BEHAVIOUR OF TMCP Q690D HIGH-STRENGTH STRUCTURAL STEEL AT STRAIN RATES FROM 0.00025 TO 760 S-1. The Hong Kong Institute of Steel Construction, marzo de 2022. http://dx.doi.org/10.18057/ijasc.2022.18.1.7.
Texto completo