Literatura académica sobre el tema "Glass-ceramic sealant"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Glass-ceramic sealant".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "Glass-ceramic sealant"
Gunawan, Sulistyo y Iwan Setyawan. "Progress in Glass-Ceramic Seal for Solid Oxide Fuel Cell Technology". Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 82, n.º 1 (11 de abril de 2021): 39–50. http://dx.doi.org/10.37934/arfmts.82.1.3950.
Texto completoLawita, Pornchanok, Apirat Theerapapvisetpong y Sirithan Jiemsirilers. "Effect of Bi2O3 on Thermal Properties of Barium-Free Glass-Ceramic Sealants in the CaO-MgO-B2O3-Al2O3-SiO2 System". Key Engineering Materials 659 (agosto de 2015): 180–84. http://dx.doi.org/10.4028/www.scientific.net/kem.659.180.
Texto completoJaved, Hassan, Antonio Gianfranco Sabato, Mohsen Mansourkiaei, Domenico Ferrero, Massimo Santarelli, Kai Herbrig, Christian Walter y Federico Smeacetto. "Glass-Ceramic Sealants for SOEC: Thermal Characterization and Electrical Resistivity in Dual Atmosphere". Energies 13, n.º 14 (17 de julio de 2020): 3682. http://dx.doi.org/10.3390/en13143682.
Texto completoKingnoi, Namthip, Jiratchaya Ayawanna y Nattapol Laorodphan. "Barium (Zinc) Borosilicate Sealing Glass and Joining Interface with YSZ Electrolyte and Crofer22APU Interconnect in SOFCs". Solid State Phenomena 283 (septiembre de 2018): 72–77. http://dx.doi.org/10.4028/www.scientific.net/ssp.283.72.
Texto completoLey, K. L., M. Krumpelt, R. Kumar, J. H. Meiser y I. Bloom. "Glass-ceramic sealants for solid oxide fuel cells: Part I. Physical properties". Journal of Materials Research 11, n.º 6 (junio de 1996): 1489–93. http://dx.doi.org/10.1557/jmr.1996.0185.
Texto completoHaanappel, V. A. C., P. Batfalsky, S. M. Gross, L. G. J. de Haart, J. Malzbender, N. H. Menzler, V. Shemet, R. W. Steinbrech y I. C. Vinke. "A Comparative Study Between Resistance Measurements in Model Experiments and Solid Oxide Fuel Cell Stack Performance Tests". Journal of Fuel Cell Science and Technology 4, n.º 1 (28 de febrero de 2006): 11–18. http://dx.doi.org/10.1115/1.2393301.
Texto completoGross, Sonja M., Thomas Koppitz, Josef Remmel, Jean-Bernard Bouche y Uwe Reisgen. "Joining properties of a composite glass-ceramic sealant". Fuel Cells Bulletin 2006, n.º 9 (septiembre de 2006): 12–15. http://dx.doi.org/10.1016/s1464-2859(06)71320-7.
Texto completoSmeacetto, Federico, Auristela De Miranda, Andreas Chrysanthou, Enrico Bernardo, Michele Secco, Massimiliano Bindi, Milena Salvo, Antonio G. Sabato y Monica Ferraris. "Novel Glass-Ceramic Composition as Sealant for SOFCs". Journal of the American Ceramic Society 97, n.º 12 (11 de septiembre de 2014): 3835–42. http://dx.doi.org/10.1111/jace.13219.
Texto completoLaorodphan, Nattapol y Jiratchaya Ayawanna. "BaO-Al2O3-SiO2-B2O3 Glass-Ceramic SOFCs Sealant: Effect of ZnO Additive". Key Engineering Materials 751 (agosto de 2017): 455–60. http://dx.doi.org/10.4028/www.scientific.net/kem.751.455.
Texto completoSohn, Sung-Bum, Se-Young Choi, Gyeung-Ho Kim, Hue-Sup Song y Goo-Dae Kim. "Suitable Glass-Ceramic Sealant for Planar Solid-Oxide Fuel Cells". Journal of the American Ceramic Society 87, n.º 2 (febrero de 2004): 254–60. http://dx.doi.org/10.1111/j.1551-2916.2004.00254.x.
Texto completoTesis sobre el tema "Glass-ceramic sealant"
Zhao, Yilin [Verfasser]. "Thermo-mechanical properties of glass-ceramic solid oxide fuel cell sealant materials / Yilin Zhao". Aachen : Hochschulbibliothek der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2013. http://d-nb.info/1046975137/34.
Texto completoDE, MIRANDA AURISTELA CARLA. "Design, production and characterization of glass-ceramic based sealants for solid oxide fuel cells applications". Doctoral thesis, Politecnico di Torino, 2015. http://hdl.handle.net/11583/2591557.
Texto completoJAVED, HASSAN. "Design, synthesis and characterization of glass-ceramic and ceramic based materials for solid oxide electrolysis cell (SOEC) applications". Doctoral thesis, Politecnico di Torino, 2019. http://hdl.handle.net/11583/2743336.
Texto completoReddy, Allu Amarnath. "Alkaline-earth aluminosilicate-based glass and glass-ceramic sealants for functional applications". Doctoral thesis, Universidade de Aveiro, 2014. http://hdl.handle.net/10773/15217.
Texto completoThe planar design of solid oxide fuel cell (SOFC) is the most promising one due to its easier fabrication, improved performance and relatively high power density. In planar SOFCs and other solid-electrolyte devices, gas-tight seals must be formed along the edges of each cell and between the stack and gas manifolds. Glass and glass-ceramic (GC), in particular alkaline-earth alumino silicate based glasses and GCs, are becoming the most promising materials for gas-tight sealing applications in SOFCs. Besides the development of new glass-based materials, new additional concepts are required to overcome the challenges being faced by the currently existing sealant technology. The present work deals with the development of glasses- and GCs-based materials to be used as a sealants for SOFCs and other electrochemical functional applications. In this pursuit, various glasses and GCs in the field of diopside crystalline materials have been synthesized and characterized by a wide array of techniques. All the glasses were prepared by melt-quenching technique while GCs were produced by sintering of glass powder compacts at the temperature ranges from 800−900 ºC for 1−1000 h. Furthermore, the influence of various ionic substitutions, especially SrO for CaO, and Ln2O3 (Ln=La, Nd, Gd, and Yb), for MgO + SiO2 in Al-containing diopside on the structure, sintering and crystallization behaviour of glasses and properties of resultant GCs has been investigated, in relevance with final application as sealants in SOFC. From the results obtained in the study of diopside-based glasses, a bilayered concept of GC sealant is proposed to overcome the challenges being faced by (SOFCs). The systems designated as Gd−0.3 (in mol%: 20.62MgO−18.05CaO−7.74SrO−46.40SiO2−1.29Al2O3 − 2.04 B2O3−3.87Gd2O3) and Sr−0.3 (in mol%: 24.54 MgO−14.73 CaO−7.36 SrO−0.55 BaO−47.73 SiO2−1.23 Al2O3−1.23 La2O3−1.79 B2O3−0.84 NiO) have been utilized to realize the bi-layer concept. Both GCs exhibit similar thermal properties, while differing in their amorphous fractions, revealed excellent thermal stability along a period of 1,000 h. They also bonded well to the metallic interconnect (Crofer22APU) and 8 mol% yttrium stabilized zirconium (8YSZ) ceramic electrolyte without forming undesirable interfacial layers at the joints of SOFC components and GC. Two separated layers composed of glasses (Gd−0.3 and Sr−0.3) were prepared and deposited onto interconnect materials using a tape casting approach. The bi-layered GC showed good wetting and bonding ability to Crofer22APU plate, suitable thermal expansion coefficient (9.7–11.1 × 10–6 K−1), mechanical reliability, high electrical resistivity, and strong adhesion to the SOFC componets. All these features confirm the good suitability of the investigated bi-layered sealant system for SOFC applications.
A concepção planar de células de combustível de óxido sólido (SOFC) é a mais promissora devido a sua fabricação mais fácil, um melhor desempenho e uma densidade de potência relativamente elevada. Nas SOFCs planares e outros dispositivos de electrólitos sólidos são necessárias vedações estanques ao gás ao longo das arestas de cada uma das células e entre os tubos de distribuição de gás e de pilha. Materiais vítreos e vitrocerâmicos (GC), em particular com composições baseadas em aluminosilicatos alcalino-terrosos, estão entre os materiais mais promissores para aplicações de vedação à prova de gás em SOFCs. Além do desenvolvimento de novos materiais à base de vidros e vitrocerâmicos, são também necessários novos conceitos para superar os desafios enfrentados pela tecnologia selante atualmente existente. O presente trabalho visa dar um contributo nesse sentido, propondo soluções de vedação para SOFCs e outras aplicações electroquímicas. Para o efeito, foram sintetizados vários vidros e GCs à base de diópsido, os quais foram caracterizados por recurso a uma grande variedade de técnicas. Todos os vidros foram preparados por fusão, enquanto os GCs foram produzidos por sinterização (tratamento térmico) de compactos de pó de vidro nas faixas de temperatura de 800 − 900 ºC por 1 − 1000 h. Além disso, foram estudados os efeitos de diversas substituições iónicas, especialmente de CaO por SrO, e de MgO + SiO2 por Ln2O3 (Ln = La, Nd, Gd, e Yb), em composições de aluminosilicatos à base de diópsido na estrutura, sinterização e cristalização dos vidros e nas propriedades dos GCs resultantes com particular relevância para as propriedades de vedação em SOFCs. Com base nos resultados obtidos neste estudo, foi possível propor um novo conceito de selante vritrocerâmico em bi-camadas que visa ultrapassar os desafios enfrentados pelos vedantes actualmente usados em SOFCs. Os sistemas designados por Gd−0,3 (em % molar: 20,62 MgO−18,05 CaO−7,74 SrO−46,40 SiO2−1,29 Al2O3−2,04 B2O3−3,87 Gd2O3) e Sr−0,3 (em % molar: 24,54 MgO−14,73 CaO−7,36 SrO−0,55 BaO−47,73 SiO2−1,23 Al2O3−1,23 La2O3−1,79 B2O3−0,84 NiO) foram seleccionados para realizar o conceito de bi-camada. Ambos os GCs exibem propriedades térmicas semelhantes, e excelente estabilidade térmica ao longo de um período de 1.000 horas, mas diferem nas suas fracções vítreas/cristalinas. Eles revelaram também elevada aptidão para se ligarem à interconexão metálica (Crofer22APU) e ao electrólito sólido (zircónia estabilizada com 8 mol% de ítria (8YSZ) sem a formação de camadas interfaciais indesejáveis entre os diferentes componentes das SOFCs. Duas camadas separadas compostas pelos vidros (Gd−0,3 e Sr−0.3) foram preparadas e depositadas sobre as interconexões metálicas através de uma abordagem tape casting. As bi-camadas vitrocerâmicas mostram boa capacidade de molhamento e ligação à placa Crofer22APU, coeficientes de expansão térmica adequados (9,7−11,1 × 10−6 K−1), confiabilidade mecânica, elevada resistividade eléctrica, e uma forte adesão aos componentes da SOFC. Todas estas características confirmam a boa adequação do sistema selante bi-camadas investigado para aplicações em SOFCs.
SABATO, ANTONIO GIANFRANCO. "Study of new glass-ceramic sealants and protective coatings for SOFC application: processing, characterization and performances in relevant conditions". Doctoral thesis, Politecnico di Torino, 2017. http://hdl.handle.net/11583/2674874.
Texto completoChen, Yi-Ju y 陳怡如. "BaO-B2O3-SiO2-Al2O3 Glass Ceramic system used as Sealant for Intermediate-Temperature Solid Oxide Fuel Cell (IT-SOFC)". Thesis, 2008. http://ndltd.ncl.edu.tw/handle/58121142098617370253.
Texto completo國立臺灣大學
材料科學與工程學研究所
96
Several formulations of the glass based on BaO-B2O3-SiO2-Al2O3 systems have been developed and accepted as an appropriate compliant sealing material for planar Solid Oxide Fuel Cells (SOFC) operated at 800oC. The sealing materials in this study are designed by considering lower Tg (glass transition temperature) slightly than the set operation temperature (600-650oC), small CTE mismatch, chemically and physically compatible with the other components, and good wettability with specified substrates. Three main subjects are investigated in this study. The first one is the synthesis and characterization of the glasses, including thermal properties and crystallization behavior. The second is the investigation on crystallization kinetics by using Kissinger equation and Piloyan plot. Third one is to analyze the interfacial stability of the glass with 8YSZ or SDC. Differential thermal analysis (DTA) and Thermal Mechanical Analysis (TMA) were applied to study the thermal properties of the glass. X-ray diffraction (XRD) analysis was conducted to study the crystallization behavior. Scanning and transmission electron microscopes (SEM and TEM) with energy dispersive spectroscopy (EDS) were employed to observe the microstructure and phase evaluation. The results show that 47BaO-21B2O3-27SiO2-5Al¬2O3 (G1A5) possess better glass forming ability (GFA) than other formulation, and has the matched working temperature range (547-694oC) close to the operation temperature 600-650oC of IT-SOFC . The major crystalline phases that would precipitate from the glass matrix during IT-SOFC operation were hexacelsian and BaSiO3. The activation energies for each crystalline phase are 423±38 kJ/mol and 363±19 kJ/mol. When it comes to sealing with 8YSZ, although G1A5 glass can not have a good bonding property with 8YSZ, but it can seal very well with SDC, even after long-term thermal treatment (100 hr at 650oC). On the other hand, in this study we also found out another glass formulation, 53BaO-12B2O3-34SiO2-1Al¬2O3 (G6) can have a good bonding behavior with 8YSZ.
Hou, Fan-lin y 侯梵琳. "Effects of LSM Coating on Joining Strength Between Metallic Interconnect and Glass-Ceramic Sealant for Solid Oxide Fuel Cell". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/83457853690913104073.
Texto completo國立中央大學
機械工程學系
103
The objective of this study is to investigate the joint strength between glass-ceramic sealant and LSM-coated metallic interconnect both in air and a reducing environment (H2-7 vol% H2O) at RT and 800 °C. The applied materials are a GC-9 glass-ceramic developed at the Institute of Nuclear Energy Research (INER), a LSM layer coated at INER, and a commercial Crofer 22 APU ferritic stainless steel. The joint strength is reduced as the testing temperature is increased from room temperature (RT) to 800 °C, regardless of specimen condition. The joint strength between the given GC-9 glass-ceramic sealant and Crofer 22 APU interconnect steel is degraded by 36-80% in applying a LSM coating on the interconnect steel. The shear strength of LSM-coated specimen is enhanced by 52-200% at RT and 800 °C after 1000-h thermal aging in air. This may be attributed to a self-healing effect of the GC-9 glass-ceramic during the thermal aging treatment in air to reduce the pore size existent around the GC-9/LSM interface. As for tensile specimen, the enhancement of joint strength is insignificant after thermal aging in air. A thermal aging of 1000 h in H2-7 vol% H2O reduces the shear strength by 44-100% at RT and 800 °C while it reduces 65% of the tensile strength at RT but enhances it by 87% at 800 °C. The enhancement of tensile strength at 800 °C may result from diffusion of water into GC-9 and relaxation of GC-9 structure during thermal aging in wet hydrogen. No significant environment effect on the joint strength of non-aged, coated specimen is found due to a short period of mechanical testing. After 1000 h-aging in each environment, the joint strength of coated specimens aged in H2-7 vol% H2O is generally lower than that aged in air except the tensile strength at 800 °C. The exception may be associated with a water softening effect during thermal aging in H2-7 vol% H2O. Cr2O3 is observed between LSM and metal substrate in the LSM-coated joint. Pores within GC-9 as well as at the interface of LSM and GC-9 are found in the LSM-coated specimen. Cr is well blocked by the LSM coating such that BaCrO4 is observed only in air-aged specimen due to LSM volume shrinkage. Spinel is observed within the GC-9 pores on the LSM layer after thermal aging in both oxidizing and reducing environments, with a higher density found in the specimen aged in air. The joint strength and fracture path are affected by the pores existent around the LSM/GC-9 interface for the LSM-coated joint. A self-healing effect of GC-9 glass-ceramic at high temperature could help heal these pores and improve the joint strength.
Chen, Yi-Ju. "BaO-B2O3-SiO2-Al2O3 Glass Ceramic system used as Sealant for Intermediate-Temperature Solid Oxide Fuel Cell (IT-SOFC)". 2008. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0001-2107200809555500.
Texto completoLin, Kun-liang y 林坤亮. "Analysis of Creep Properties of Glass Ceramic Sealant and Its Joint with Metallic Interconnect for Solid Oxide Fuel Cells". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/27998474506579563885.
Texto completo國立中央大學
機械工程研究所
100
Creep properties at 800 oC are investigated for a newly developed solid oxide fuel cell glass-ceramic sealant (GC-9) in variously aged conditions using a ring-on-ring test technique. Creep properties of sandwich joint specimens made of GC-9 and a interconnect steel (Crofer 22 H) are also investigated at 800 oC under several constant shear and tensile loadings. When subjected to an applied constant load at 800 oC, the 1000 h-aged GC-9 can last longer than the non-aged and 100 h-aged ones before rupture. The 1000 h-aged GC-9 also exhibits a much smaller minimum creep strain rate than do the non-aged and 100 h-aged ones. Therefore, a longer aging time of 1000 h leads to a greater extent of crystallization and creep resistance at 800 oC for the given GC-9 glass-ceramic sealant. The creep strength at 1000 h is about 6 MPa, 9 MPa, and 15 MPa, for the non-aged, 100 h-aged, and 1000 h-aged GC-9, respectively. The creep rupture time of Crofer 22 H/GC-9/Crofer 22 H joint specimens is increased with a decrease in the applied constant load at 800 oC for both shear and tensile loading modes. The creep strength at 1000 h under shear loading is about one quarter of the shear strength at 800 oC. The tensile creep strength at 1000 h is about 9% of the tensile strength at 800 oC. Failure patterns of both shear and tensile joint specimens are similar regardless of the creep rupture time. Cracks initiate at the interface between the spinel layer and chromate (BaCrO4) layer, penetrate through the BaCrO4 layer, and propagate along the interface between the chromate layer and glass-ceramic substrate until final fracture. Final, fast fracture occasionally takes place within the glass-ceramic layer.
Yeh, Jing-Hong y 葉勁宏. "Analysis of High-Temperature Mechanical Durability for the Joint of Glass Ceramic Sealant and Metallic Interconnect for Solid Oxide Fuel Cell". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/24440539027544024424.
Texto completo國立中央大學
機械工程研究所
99
Mechanical properties at various temperatures (25 oC-800 oC) were investigated for a newly developed solid oxide fuel cell glass sealant (GC-9) in variously aged conditions. The joint strength between the GC-9 glass-ceramic sealant and an interconnect steel (Crofer 22 H) coated with La0.67Sr0.33MnO3 (LSM) was also investigated at 800 oC. In addition, creep rupture properties of the joint specimens were also investigated at 800 oC under constant loading. For the 1000 h-aged, sintered GC-9 glass, the flexural strength at 650 oC-750 oC was greater than that at 25 oC due to a crack healing effect. From the force-displacement curves of the 1000 h-aged GC-9 glass, the inferred glass transition temperature (Tg) was between 750 oC and 800 oC. Therefore, its flexural strength was significantly reduced at 800 oC due to a viscous effect. However, a greater flexural strength and stiffness of the aged GC-9 glass over the non-aged one was observed at temperature higher than 700 oC due to a greater extent of crystallization. Both the shear and tensile bonding strength at 800 oC of the joint specimens coated with LSM were weaker than those of the non-coated ones. Through analysis of the interfacial microstructure, microvoids and microcracks were found at the BaCrO4 chromate layer. When the LSM coating film and BaCrO4 layer were joined together with incompatible deformation, microvoids/microcracks were formed at the BaCrO4 The creep rupture time of both shear and tensile joint specimens was increased with a decrease in the applied constant load at 800 layer. In this regard, the joint strength was degraded by such a coating. oC. The creep strength at 1000 h under shear loading was about one fifth of the shear strength at 800 oC. The tensile creep strength at 1000 h was about 8% of the tensile strength at 800 oC. The failure pattern of the shear creep joint specimens with a shorter creep rupture time was similar to that of the shear joint strength test specimens while a different failure pattern was found for a longer creep rupture time.
Libros sobre el tema "Glass-ceramic sealant"
American Society of Mechanical Engineers. Winter Meeting. Technology of glass, ceramic, or glass-ceramic to metal sealing: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 13-18, 1987. New York, N.Y: American Society of Mechanical Engineers, 1987.
Buscar texto completoW, Kraft, Deutsche Gesellschaft für Metallkunde y International Conference on Joining Ceramics, Glass and Metal (3rd : 1989 : Bad Nauheim, Germany), eds. Joining ceramics, glass, and metal. Oberursel: DGM Informationsgesellschaft, 1989.
Buscar texto completoModdeman. Technology of Glass Ceramic or Glass Ceramic to Metal Sealing/Asme Md. Vol. 4./G00402. Amer Society of Mechanical, 1987.
Buscar texto completoCapítulos de libros sobre el tema "Glass-ceramic sealant"
Hbaieb, Kais. "Determination of Fracture Strength of Glass-Ceramic Sealant Used in SOFC". En Advances in Solid Oxide Fuel Cells V, 195–201. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470584316.ch18.
Texto completoLiu, W. N., X. Sun, B. Koeppel y M. A. Khaleel. "Creep Behavior of Glass/Ceramic Sealant Used in Solid Oxide Fuel Cells". En Advances in Solid Oxide Fuel Cells V, 203–9. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470584316.ch19.
Texto completoSchwickert, T., U. Diekmann, P. Geasee y R. Conradt. "Performance of Different Glass-Ceramic Sealants for a Planar SOFC Concept". En Functional Materials, 217–20. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607420.ch37.
Texto completoGross, S. M., T. Koppitz, J. Remmel y U. Reisgen. "Glass-Ceramic Materials of the System BaO-CaO-SiO2 as Sealants for SOFC Applications". En Ceramic Engineering and Science Proceedings, 239–45. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470291245.ch27.
Texto completoGross, S. M., T. Koppitz y N. H. Menzler. "Chemical Reaction Behavior Between Glass-Ceramic Sealants and High Chromium Ferritic Steels Under Various SOFC Conditions". En Ceramic Engineering and Science Proceedings, 209–16. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470291245.ch24.
Texto completoSabato, Antonio G., Hassan Javed, Milena Salvo, Andreas Chrysanthou y Federico Smeacetto. "Glass–Ceramic Sealants for Solid Oxide Cells Research at Politecnico di Torino: An Overview on Design, Sinter-Crystallization, Integration and Interfacial Issues". En PoliTO Springer Series, 203–27. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-85776-9_6.
Texto completo"Glass and Ceramics Repair and Bonding". En Industrial Polymer Applications: Essential Chemistry and Technology, 140–48. The Royal Society of Chemistry, 2016. http://dx.doi.org/10.1039/bk9781782628149-00140.
Texto completoGross-Barsnick, Sonja-Michaela. "Interaction of glass-ceramic sealants with solid oxide fuel cell components: thermo-mechanical analysis". En Intermediate Temperature Solid Oxide Fuel Cells, 411–26. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-817445-6.00012-0.
Texto completoBasu, Rajendra, Saswati Ghosh, A. Sharma, P. Kundu, Arjun Dey y Anoop Mukhopadhyay. "Nanoindentation Behavior of High-Temperature Glass–Ceramic Sealants for Anode-Supported Solid Oxide Fuel Cell". En Nanoindentation of Brittle Solids, 243–48. CRC Press, 2014. http://dx.doi.org/10.1201/b17110-40.
Texto completoActas de conferencias sobre el tema "Glass-ceramic sealant"
Chang, Hsiu-Tao, Chih-Kuang Lin y Chien-Kuo Liu. "High Temperature Mechanical Properties of a Crystallized BaO-B2O3-Al2O3-SiO2 Glass Ceramic for SOFC". En ASME 2009 7th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2009. http://dx.doi.org/10.1115/fuelcell2009-85084.
Texto completoCaron, N., L. Bianchi y S. Méthout. "Development of a Sealing Technical Layer for SOFCs Applications". En ITSC2008, editado por B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima y G. Montavon. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. http://dx.doi.org/10.31399/asm.cp.itsc2008p0094.
Texto completoHuang, X., K. Ridgeway, S. Narasimhan, K. Reifsnider y X. Ma. "Application of Plasma Sprayed Coatings in a Novel Integrated Composite Seal for SOFCs". En ITSC2006, editado por B. R. Marple, M. M. Hyland, Y. C. Lau, R. S. Lima y J. Voyer. ASM International, 2006. http://dx.doi.org/10.31399/asm.cp.itsc2006p0361.
Texto completoMao, Xiaoan, Patcharin Saechan y Artur J. Jaworski. "Evaluation of Random Stack Materials for Use in Thermoacoustic Refrigerators". En ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-24763.
Texto completoChoi, Won Kyoung, Moon Gi Cho, Sun Kyoung Seo, Hyuck Mo Lee, Byung Gil Jeong, Hwa-Sun Lee, Young-Chul Ko, Jin-Ho Lee y Chang Youl Moon. "Hermetic Packaging of Micro Scanner for Laser Display Applications". En ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems collocated with the ASME 2005 Heat Transfer Summer Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/ipack2005-73252.
Texto completoTamaura, Y., H. Kaneko, Y. Naganuma, S. Taku, K. Ouchi y N. Hasegawa. "Simultaneous Production of H2 and O2 With Rotary-Type Solar Reactor (Tokyo Tech Model) for Solar Hybrid Fuel". En ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/es2008-54282.
Texto completoShahien, M., K. Shinoda y J. Akedo. "Hybrid Aerosol Deposition as an Outstanding Prospective for Dense Barrier Ceramic Coatings Deposition on Different Substrates". En ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0709.
Texto completoPreussner, Brian D., Joseph A. Nenni y Vondell J. Balls. "An Overview of Risk Management Planning for Hot-Isostatic Pressure Treatment of High-Level Waste Calcine for the Idaho Cleanup Project". En ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78150.
Texto completoInformes sobre el tema "Glass-ceramic sealant"
Craven, S., D. Kramer y W. Moddeman. Chemistry of glass-ceramic to metal bonding for header applications: 2. Hydrogen bubble formation during glass-ceramic to metal sealing. Office of Scientific and Technical Information (OSTI), diciembre de 1986. http://dx.doi.org/10.2172/6963554.
Texto completoCassidy, R. T. y W. E. Moddeman. Sealing of Al-containing stainless steel to lithia-alumina-silica glass-ceramic. Office of Scientific and Technical Information (OSTI), diciembre de 1989. http://dx.doi.org/10.2172/274154.
Texto completo