Tesis: "Finite element analysis"

1

Margetts, Lee. "Parallel finite element analysis". Thesis, University of Manchester, 2002. http://www.manchester.ac.uk/escholar/uk-ac-man-scw:70784.

Texto completo

Resumen

Finite element analysis is versatile and used widely in a range of engineering andscientific disciplines. As time passes, the problems that engineers and designers areexpected to solve are becoming more computationally demanding. Often theproblems involve the interplay of two or more processes which are physically andtherefore mathematically coupled. Although parallel computers have been availablefor about twenty years to satisfy this demand, finite element analysis is still largelyexecuted on serial machines. Parallelisation appears to be difficult, even for thespecialist. Parallel machines, programming languages, libraries and tools are used toparallelise old serial programs with mixed success. In some cases the serialalgorithm is not naturally suitable for parallel computing. Some argue that rewritingthe programs from scratch, using an entirely different solution strategy is a betterapproach. Taking this point of view, using MPI for portability, a mesh free elementby element method for simple data distribution and the appropriate iterative solvers,a general parallel strategy for finite element analysis is developed and assessed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Larsson, Jesper. "Spring Element Evaluation Using Finite Element Analysis". Thesis, Högskolan i Jönköping, Tekniska Högskolan, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-45837.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Wong, S.-W. "Element-by-element methods in transient analysis". Thesis, University of Manchester, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383902.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Bakhtiari, Siamak. "Stochastic finite element slope stability analysis". Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/stochastic-finite-element-slope-stability-analysis(c1b451d9-8bf6-43ff-9c10-7b5209fb45c1).html.

Texto completo

Resumen

In this thesis, the failures that occurred during the construction of the Jamuna Bridge Abutment in Bangladesh have been investigated. In particular, the influence of heterogeneity on slope stability has been studied using statistical methods, random field theory and the finite element method. The research is divided into three main parts: the statistical characterization of the Jamuna River Sand, based on an extensive in-situ and laboratory database available for the site; calibration of the laboratory data against a double-hardening elastoplastic soil model; and stochastic finite element slope stability analyses, using a Monte Carlo simulation, to analyse the slope failures accounting for heterogeneity. The sand state has been characterised in terms of state parameter, a meaningful quantity which can fully represent the mechanical behaviour of the soil. It was found that the site consists of predominantly loose to mildly dilative material and is very variable. Also, a Normal distribution was found to best represent the state parameter and a Lognormal distribution was found to best represent the tip resistance.The calibration of the constitutive model parameters was found to be challenging, as alternative approaches had to be adopted due to lack of appropriate test results available for the site. Single-variate random fields of state parameter were then linked to the constitutive model parameters based on the relationships found between them, and a parametric study of the abutment was then carried out by linking finite elements and random field theory within a Monte Carlo framework.It was found that, as the degree of anisotropy of the heterogeneity increases, the range of structural responses increases as well. For the isotropic cases, the range of responses was relatively smaller and tended to result in more localised failures. For the anisotropic cases, it was found that there are two different types of deformation mechanism. It was also found that, as the vertical scale of fluctuation becomes bigger, the range of possible structural responses increases and failure is more likely. Finally, it was found that the failed zones observed during the excavation of the West Guide Bund of the Jamuna Bridge Abutment could be closely predicted if heterogeneity was considered in the finite element analyses. In particular, it was found that, for such a natural deposit, a large degree of anisotropy (in the range of 20) could account for the deformation mechanisms observed on site.

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Monaghan, Dermot James. "Automatically coupling elements of dissimilar dimension in finite element analysis". Thesis, Queen's University Belfast, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326293.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Berger, Stephanie 1981. "Experimental and finite element analysis of high pressure packer elements". Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28879.

Texto completo

Resumen

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2004.
Includes bibliographical references (leaf 30).
Packer elements are traditionally rubber seals that can operate under specified downhole conditions and provide a seal for either a short-term, retrievable, or a long-term, permanent, completion. In this case a retrievable 19.7cm (7-3/4") packer element for a high-pressure high-temperature (HPHT) environment was designed and tested. The element created a seal between the mandrel, or tubing, and the casing. At high temperature and pressure rubber needs to be contained so that it will create and maintain an energized seal. In this study only Aflas rubber was tested. Various backup systems were examined; some more traditional designs such as the carbon steel foldback ring were compared to more experimental ideas. Results of theoretical simulations were compared to actual test results in order to gain a greater understanding of element behavior. Experiments were also performed to study the process of element setting, which is difficult to observe due to the high pressures and temperatures required. In a related study alternative materials to rubber such as annealed high-conductivity oxygen-free copper were tested to determine if the properties could be applied for packer element applications. The most successful design was the foldback ring with an anti-extrusion PEEK ring under the gage ring. This design passed a liquid test at 134 MPa (19.5k psi) differential pressure and a gas test at 87.6 MPa (12.7k psi) differential pressure. New designs such as the split ring with mesh and the garter spring with mesh did not pass fixture tests but could be successful with further modifications. FEA was used as an analytical tool to create simulations of the element after a setting force is applied. The modeling was shown to correlate to the actual test results and therefore it would be a good tool to use in future studies.
by Stephanie Berger.
S.M.

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Xiao, Dong Wen. "Efficiency analysis on element decomposition method for stochastic finite element analysis". Thesis, University of Macau, 2000. http://umaclib3.umac.mo/record=b1636334.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Irfanoglu, Bulent. "Boundary Element-finite Element Acoustic Analysis Of Coupled Domains". Phd thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/12605360/index.pdf.

Texto completo

Resumen

This thesis studies interactions between coupled acoustic domain(s) and enclosing rigid or elastic boundary. Boundary element-finite element (BE-FE) sound-structure interaction models are developed by coupling frequency domain BE acoustic and FE structural models using linear inviscid acoustic and elasticity theories. Flexibility in analyses is provided by discontinuous triangular and quadrilateral elements in the BE method (BEM), and a rectangular plate and a triangular shell element in the FE method (FEM). An analytical formulation is developed for an extended fundamental sound-structure interaction problem that involves locally reacting sound absorptive treatment on interior elastic boundary. This new formulation is built upon existing analytical solutions for a configuration known as the cavity-backed-plate problem. Results from developed analytical formulation are compared against those from independent BE-FE analyses. Analytical and BE-FE analysis results for a selection of cavity-plate(s) interaction cases are given. Single- and multi-domain BE analyses of cavity-Helmholtz resonator interaction are provided as an alternative to modal method of acoustoelasticity. A discrete-form of the existing BE acoustic particle velocity formulation is presented and demonstrated on a basic case study. Both the existing and the discretized BE acoustic particle velocity formulations could be utilized in acoustic studies. A selection of case studies involving fundamental configurations are studied both analytically and computationally (by BE or BE-FE methods). These studies could provide a basis for benchmark case development in the field of acoustics.

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Jacobs, Ralf Theo. "Finite element-boundary element analysis of conformal microstrip antennas". Thesis, Heriot-Watt University, 2001. http://hdl.handle.net/10399/531.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Elofsson, Johan y Per Martinsson. "Welding simulation with Finite Element Analysis". Thesis, University West, Department of Technology, Mathematics and Computer Science, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-827.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

11

Johannessen, Kjetil André. "An adaptive isogeometric finite element analysis". Thesis, Norwegian University of Science and Technology, Department of Mathematical Sciences, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9936.

Texto completo

Resumen

In this thesis we will explore the possibilities of making a finite element solver for partial differential equations using the isogeometric framework established by Hughes et al. Whereas general B-splines and NURBS only allow for tensor product refinement, a new technology called T-splines will open for true local refinement. We will give an introduction into T-splines along with B-splines and NURBS on which they are built, presenting as well a refinement algorithm which will preserve the exact geometry of the T-spline and allow for more control points in the mesh. For the solver we will apply a residual-based a posteriori error estimator to identify elements which contribute the most to the error, which in turn allows for a fully automatic adaptive refinement scheme. The performance of the T-splines is shown to be superior on problems which contains singularities when compared with more traditional splines. Moreover the T-splines along with a posteriori error estimators are shown to have a very positive effect on badly parametrized models, as it seem to make the solution grid independent of the original parametrization.

Los estilos APA, Harvard, Vancouver, ISO, etc.

12

Risa, Adrian Opheim. "Finite element analysis of marine umbilical". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for marin teknikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-15368.

Texto completo

Resumen

Background: Marine umbilicals play a vital role in oil and gas production fields. The oil and gas industry is in constant change, as the resources in the reservoirs are ever decreasing. Today oil and gas exploration takes place at increasing depths, and in harsher environments. This means that components like marine umbilicals are getting more advanced. Thus accurate structural analysis is important. The focus in this thesis is an umbilical consisting of 19 copper conductors. The goal is to model it in ABAQUS, and compare the results with laboratory testing. Results: Stress distribution and fatigue calculations were the main focus. Ultimately, it was proven that ABAQUS was able to represent the umbilical's general behavior. However, due to computational limitations and limits in the material model, the result proved inaccurate. In particular, values for axial stress and strain, exceeds the expected values. Conclusion: The model was able to represent the general behavior from the laboratory results. Effort should be made in the future to overcome the computational problems, and the material model should be revised.

Los estilos APA, Harvard, Vancouver, ISO, etc.

13

Witte, Holger. "Magnet design using finite element analysis". Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.491607.

Texto completo

Resumen

This thesis applies the method of finite element software to calculate pulsed high field magnets. The calculations address the structural and thermal load of pulsed magnets during discharge and at peak field. The most successful currently-used coil designs from different magnet laboratories are assessed with these methods. The results are compared against wellestablished analytic programs; arising differences are discussed. Particular emphasis is on the coil designs developed for the pulsed field facility in the Clarendon Laboratory, Oxford, UK. The facility, named after Nikolas Kurti, is described and classified. The coil designs are based on a novel high strength copper-silver conductor, which is compared to other common conductors. In combination with the novel calculation methods this established a new quality of high magnetic fields: the local record was broken in March 2007 by creating the highest magnetic field to date in the Clarendon Laboratory. Present and future trends in pulsed magnet design are discussed and evaluated. These include a discussion of foil coils, braiding of conductors and the matching of conductors with suitable reinforcement. Particular emphasis is placed on the verification of the simulation results. To this end a finite element method is developed which can be used to predict the irreversible change of the inductance of pulsed magnets due to plastic deformation. Preliminary results of residual strains in a magnet using neutron scattering are also considered. Another focus is on reducing the cool-down time of pulsed magnets by using rapid cooling methods. The concept of the so-called 'cooling disc' is new in this respect. Experimental and theoretical results are contrasted with other methods. Other work has contributed to the design of the magnetic channel of the international Muon Ionization Cooling Experiment; this thesis gives a summary. The work comprises force calculations, quench considerations and magnetic shielding issues.

Los estilos APA, Harvard, Vancouver, ISO, etc.

14

Wagner, Roy E. "Finite element analysis of wire coating". Thesis, University of Ottawa (Canada), 1987. http://hdl.handle.net/10393/5236.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

15

Wanstreet, Pinar. "Finite element analysis of slope stability". Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5480.

Texto completo

Resumen

Thesis (M.S.)--West Virginia University, 2007.
Title from document title page. Document formatted into pages; contains xii, 86 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 80-82).

Los estilos APA, Harvard, Vancouver, ISO, etc.

16

Perry, William H. "Finite element analysis of polymer flows". Ohio : Ohio University, 1985. http://www.ohiolink.edu/etd/view.cgi?ohiou1184072781.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

17

Mousa, A. I. "Finite element analysis of shell structure". Thesis, Cardiff University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532180.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

18

Lee, J. S. "Finite element analysis of structured media". Thesis, Swansea University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637869.

Texto completo

Resumen

The main objective of this research is to develop techniques for the analysis of the load-deformation behaviour of bodies made of structured and composite media using the finite element method and the homogenisation technique. The conventional finite element method is not economical for the analysis of structured and composite media as a large number of elements are required to model different constituents and their interfaces. In this study, an approximate method called homogenisation technique, in which average mechanical characteristics of the structured media are considered, is developed through appropriate equilibrium as well as kinematic conditions, and the resulting constitutive relations are implemented in a finite element program. This technique has been applied to a number of engineering problems and, through numerical examples, the versatility of the proposed model for the analysis of structured media has been demonstrated. Comparison between the proposed model and the conventional methods are next made to illustrate the simplicity and effectiveness of the proposed homogenisation technique. The following conclusions have been reached: For the problems of media having pre-existing discontinuities such as rock joints and interfaces between two materials, the dimensions of the zone of homogenisation along the discontinuity do not show significant difference on the overall behaviour of the structure. For the problems of media in which a structure or fabric evolves during the process of deformation such as tensile fracturing and shear localisation, the proposed model shows mesh-independent behaviour and results appear to be in good agreement with the experimental results in many cases.

Los estilos APA, Harvard, Vancouver, ISO, etc.

19

Wilkerson, Lucas T. "FINITE ELEMENT ANALYSIS OF CANCELLOUS BONE". UKnowledge, 2012. http://uknowledge.uky.edu/me_etds/17.

Texto completo

Resumen

A variety of pathologies exist which increase the likelihood of bone fracture. Present methods for determining the fracture risk of a specific patient are based exclusively on the amount of bone present. While the quantity of bone tissue is correlated with strength, it neglects to account for bone’s intricate microarchitecture. To assess the effect of bone quality on strength, a methodology was developed for the structural analysis of cancellous bone biopsies. Thirty biopsies were selected from a pre-existing biopsy bank, and scanned using a SCANCO µCT-40 at a resolution of 30 microns. Cortical bone was removed from the resulting three-dimensional geometry, and the remaining cancellous bone was meshed with solid tetrahedral elements. A linear static uniaxial compression test was performed using ANSYS v14.0 to determine the apparent-level Young’s modulus. The maximum von Mises stress was also investigated, but showed poor convergence with increased mesh density. Consistent with the methodology of Pistoia et al., the failure load was assumed to occur when 2% of the bone volume exceeded 7000 µstrain. The results of the finite element analysis compared favorably with known values for cancellous bone strength.

Los estilos APA, Harvard, Vancouver, ISO, etc.

20

El-Erris, Hazim Faysal. "Finite element analysis of shell structures". Thesis, Cardiff University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329658.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

21

Begg, Michael Colin. "Finite element analysis of induction motors". Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/37942.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

22

Behroozi, Mohammad H. "Finite element analysis of aircraft tyres". Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5390/.

Texto completo

Resumen

In this thesis, the Finite Element (FE) Analysis of aircraft tyres is presented. The modelling and simulations of detailed construction of tyre enable tyre manufacturers to evaluate new designs and development before a prototype is fabricated, and aim to reduce the research costs and efforts to optimise the current tyre design of tyres. The material properties is key in the FE modelling and analysis, a number of sample from the rubber compounds and reinforcement were used to characterise the elastic, hyperelastic and viscoelastic behaviour of material. In this research, two aircraft tyres were employed for correlation study to a number of design checks and standard tests such as profile growth, sidewall deformation, footprint, contact pressure, and load-deformation data. The burst simulation was carried out to investigate when and where the failure in tyre occurs and compares it with what happens in real-world burst test as an important procedure in tyre safety certification by aviation authorities. As a result, the virtual testing would shorten the design procedure by checking the design parameters in advance of tyre prototyping. Moreover, the FE parameters such as mesh size and tyre geometry are investigated for optimisation of the runtime and accuracy and improvements in the FE results. A number of simulations were run to determine generated forces and moments across the contact patch using a steady-state approach in presence of air as the tyre inflator to obtain a higher accuracy in prediction of the vertical stiffness and footprint area. In addition, the tyre was freely rolled on the runway using an explicit approach to investigate the energy dissipation and heat build-up per tyre rotation due to the tyre viscoelasticity. Finally, TAIS (Tyre Analysis Interface System) development is explained in response to the design requirements from Dunlop Aircraft Tyres.

Los estilos APA, Harvard, Vancouver, ISO, etc.

23

Hsiao, Yung-Chin. "Finite element analysis of laser forming". Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/17440.

Texto completo

Resumen

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering, 1997, and Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1997.
Includes bibliographical references (leaves 158-161).
by Yung-Chin Hsiao.
M.S.

Los estilos APA, Harvard, Vancouver, ISO, etc.

24

Noelting, Swen Erik 1960. "FINITE ELEMENT ANALYSIS OF SHELL STRUCTURES". Thesis, The University of Arizona, 1986. http://hdl.handle.net/10150/275502.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

25

Xia, Jianjun. "Finite Element Analysis of Ship Collisions". Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/34133.

Texto completo

Resumen

The serious consequence of ship collisions necessitates the development of regulations and requirements for the subdivision and structural design of ships so that damage and environmental pollution is reduced, and safety is improved. A simplified collision model (SIMCOL) is currently being developed at Virginia Tech to conduct probabilistic analysis of damage in ship collisions and ultimately optimize ship structural designs to improve crashworthiness. Collision data for validation of SIMCOL is very difficult to obtain, and model testing is very costly. Finite Element Analysis (FEA) provides an alternative to physical validation that can be used to increase confidence and insight in simplified model results. This thesis develops a complete methodology for ship-to-ship collision simulations using the explicit non-linear FE code LS-DYNA3D. Various modeling alternatives are considered. The ability to model a complete ship-to-ship collision is developed incrementally starting with bow collisions with a rigid wall. A super-element (intersection model) approach is considered to increase the calculation speed of bow models. A conventional fine mesh finite element bow model is also developed. Results from both models are compared with each other, and with a closed-form calculation from Pedersen. A fine mesh model is developed for a struck tanker cargo section and integrated in a total ship framework modeling external dynamics and ship-to-ship contact. A series of collision scenarios is simulated using the conventional bow model and a rigid bow model striking a double hull tanker. Results are compared with SIMCOL, DAMAGE, DTU and ALPS/SCOL models. LS-DYNA provides detailed and reasonable results for ship collision analysis and comparison to increase confidence in simplified models.
Master of Science

Los estilos APA, Harvard, Vancouver, ISO, etc.

26

Bentler, David J. "Finite Element Analysis of Deep Excavations". Diss., Virginia Tech, 1998. http://hdl.handle.net/10919/30767.

Texto completo

Resumen

This dissertation describes enhancements made to the finite element program, SAGE, and research on the performance of deep excavations. SAGE was developed at Virginia Tech for analysis of soil-structure interaction problems (Morrison, 1995). The purpose of the work described in this text with SAGE was to increase the capabilities of the program for soil-structure analysis. The purpose of the research on deep excavations was to develop a deeper understanding of the behavior of excavation support systems. The significant changes made to SAGE during this study include implementation of Biot Consolidation, implementation of axisymmetric analysis, and creation of a steady state seepage module. These changes as well as several others are described. A new manual for the program is also included. A review of published studies of deep excavation performance and recent case histories is presented. Factors affecting the performance of excavation support systems are examined, and performance data from recent published case histories is compared to data from Goldberg et al.'s 1976 report to the Federal Highway Administration. The design, construction, and performance of the deep excavation for the Dam Number 2 Hydroelectric Project is described. Finite element analyses of the excavation that were performed with SAGE are presented and discussed.
Ph. D.

Los estilos APA, Harvard, Vancouver, ISO, etc.

27

Wilson, Kelly A. "Finite Element Analysis of Breast Implants". Thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/32972.

Texto completo

Resumen

The Breast Implant Lifetime Study at Virginia Tech, on which this thesis is based, seeks to develop methods and data for predicting the lifetime of saline-filled implants. This research developed Finite Element Analysis (FEA) models to evaluate the stresses that are present in the silicone breast implant material under different loading situations. The FEA work was completed using the commercial codes PATRAN and ABAQUS. PATRAN was used for pre- and post-processing, while ABAQUS was used for the actual analysis and to add fluid and contact elements not supported by PATRAN. Many different loading situations and constraints were applied to these models, as well as variations in the material and model properties. Varying the Poisson's ratio of the implant material from 0.45 to 0.49 did not make a significant difference in the results. Changing the elastic modulus of the implant material from the modulus of a Smooth implant to the modulus of a Siltex implant had a noticeable effect on the stress results, increasing the maximum stresses by almost 8%. Changing the modulus of the surrounding tissue had marked effects as well, with stiffer tissue (E=300 psi) decreasing the implant's stresses by about 60% as compared to softer tissue (E=100 psi). A ten percent decrease in implant thickness yielded a 17% average increase in stress experienced by the implant. For both the 2.5" radius and the 4" radius tissue models, using CAX4 elements produced higher overall stresses in the tissue with the same loading conditions. However, in the 2.5" tissue model, the implant itself experienced less stress with the CAX4 tissue than the CAX3 tissue. In the 4" tissue model, the implant experienced more stress when surrounded by the CAX4 tissue elements. These models will be combined with implant fatigue data to develop a life prediction method for the implant membrane.
Master of Science

Los estilos APA, Harvard, Vancouver, ISO, etc.

28

Seay, Patricia Anne. "Finite Element Analysis of Geotextile Tubes". Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36592.

Texto completo

Resumen

The three-dimensional behavior of geotextile tubes is studied using finite element modeling. Two initial shapes are investigated, one with a flat length-to-width ratio of 2:1 and the other with a flat length-to-width ratio of 5:1. The tubes are modeled resting on elastic foundations. For each initial shape, the elastic foundation is modeled using two different stiffnesses; one allows a minimum amount of "sinking" into the foundation and the other allows a considerable amount. The weight of the geotextile is included. Hydrostatic pressure is applied internally to each initially flat tube to model the pumped slurry. The shape of the tube is studied along with the contact region between the tube and its foundation, the stresses which develop in the geotextile along the planes of symmetry, and the relationship between the height of the tube and the amount of applied hydrostatic pressure.
Master of Science

Los estilos APA, Harvard, Vancouver, ISO, etc.

29

Perry, William H. Jr. "Finite element analysis of polymer flows". Ohio University / OhioLINK, 1985. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1184072781.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

30

Mahomed, N. "Finite element analysis of groundwater contamination". Master's thesis, University of Cape Town, 1990. http://hdl.handle.net/11427/8294.

Texto completo

Resumen

Includes bibliographical references.
The purpose of this study was to develop a computational Finite Element model, validated by experimentation, to assist in the understanding of groundwater contamination problems. It was mainly aimed at studying the extent and manner of travel of contaminants in the saturated soil of unconfined aquifers which may be pumped by of wells.

Los estilos APA, Harvard, Vancouver, ISO, etc.

31

Zheng, Yi. "Finite Element Analysis for Fixture Stiffness". Link to electronic thesis, 2005. http://www.wpi.edu/Pubs/ETD/Available/etd-050505-130954/.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

32

Nava, JoseÌ Manuel Franco. "Finite element versus boundary element analysis of finite strain elastic and elastoplastic fracture mechanics". Thesis, Cranfield University, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.401612.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

33

Lai, Zhi Cheng. "Finite element analysis of electrostatic coupled systems using geometrically nonlinear mixed assumed stress finite elements". Diss., Pretoria : [s.n.], 2007. http://upetd.up.ac.za/thesis/available/etd-05052008-101337/.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

34

Tseng, Gordon Bae-Ji. "Investigation of tetrahedron elements using automatic meshing in finite element analysis /". Online version of thesis, 1992. http://hdl.handle.net/1850/10699.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

35

Svensson, Daniel y Tomas Walander. "Evaluation of an Interphase Element using Explicit Finite Element Analysis". Thesis, University of Skövde, School of Technology and Society, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-3895.

Texto completo

Resumen

A research group at University of Skövde has developed an interphase element for implementation in the commercial FE-software Abaqus. The element is using the Tvergaard & Hutchinson cohesive law and is implemented in Abaqus Explicit version 6.7 using the VUEL subroutine. This bachelor degree project is referring to evaluate the interphase element and also highlight problems with the element.

The behavior of the interphase element is evaluated in mode I using Double Cantilever Beam (DCB)-specimens and in mode II using End Notch Flexure (ENF)-specimens. The results from the simulations are compared and validated to an analytical solution.

FE-simulations performed with the interphase element show very good agreement with theory when using DCB- or ENF-specimens. The only exception is when an ENF-specimen has distorted elements.

When using explicit finite element software the critical time step is of great importance for the results of the analyses. If a too long time step is used, the simulation will fail to complete or complete with errors. A feasible equation for predicting the critical time step for the interphase element has been developed by the research group and the reliability of this equation is evaluated.

The result from simulations shows an excellent agreement with the equation when the interphase element governs the critical time step. However when the adherends governs the critical time step the equation gives a time step that is too large. A modification of this equation is suggested.

Los estilos APA, Harvard, Vancouver, ISO, etc.

36

Galuta, Ezeedin M. "Combined boundary element and finite element analysis of composite bridges". Thesis, University of Ottawa (Canada), 1994. http://hdl.handle.net/10393/6814.

Texto completo

Resumen

In this thesis, the coupling of boundary element and finite element methods and its application to analyze bridges are studied for the first time. The coupling technique is implemented to analyze slab on girders and box girder bridges. The boundary element method is employed to model the bridge deck while the finite element method is used to model the girders. The finite elements and boundary elements are connected at a number of interface nodes in the longitudinal direction. For the finite element region, a static condensation technique is applied to condense the non-interface degrees of freedom. Then the finite element equations are transformed into boundary element equations and the compatibility interface mechanism required to combine the two methods is developed. A computer program which combines boundary element and finite element methods in one solution is developed in this thesis. Different types of bridges with different load cases are considered in the study in order to test the performance of the combined method. It has been shown that the results obtained by the combined method (BEM-FEM) are in good agreement with the finite strip solution. The numerical examples, considered in this thesis, demonstrated the accuracy of the results and the simplicity and reduction of the input data.

Los estilos APA, Harvard, Vancouver, ISO, etc.

37

Abou, Ghadir Mohamed Mohamed Moustafa. "Combined finite strip and finite element methods in structural analysis". Thesis, University of Leeds, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.446434.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

38

Varghese, Julian. "Hierarchical strategy for rapid finite element analysis". Thesis, Texas A&M University, 2003. http://hdl.handle.net/1969.1/232.

Texto completo

Resumen

A new methodology is introduced where the natural hierarchical character of model descriptions and simulation results are exploited to expedite analysis of problems. The philosophy and the different concepts involved are illustrated by implementing the strategy to solve some practical problems. The end result was a mix of mechanics, well-designed data structures and software interfaces that forms a rapid analysis environment. This can be very advantageous for cases where a sequence of analyses is required because of safety concerns or cost. When designing a structure, it is common to make frequent modifications to the model during the process. In such cases, the ability to use data from different models within the same analysis environment becomes a major advantage. The proposed system's forte is its hierarchical framework that allows models to communicate with each other and share information with one another. This makes it ideal for global local analyses where solutions from a global model are used to derive the boundary conditions for the local model. The system was also used to conduct a micro mechanical analysis on unidirectional composites that have a non-uniform spatial distribution of the fibers. The hierarchical strategy is not tied to any specific methodology and can be adapted to solve problem using different technologies. This allows the strategy to be used across multiple length scales and governing equations.

Los estilos APA, Harvard, Vancouver, ISO, etc.

39

Li, Jingang. "Isogeometric Finite Element Analysis Using T-Splines". Diss., CLICK HERE for online access, 2009. http://contentdm.lib.byu.edu/ETD/image/etd3159.pdf.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

40

Bodur, Mehmet Ata. "Finite Element Analysis Of Discontinuous Contact Problems". Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12606964/index.pdf.

Texto completo

Resumen

Contact is a phenomenon faced in every day life, which is actually a complex problem to tackle for engineers. Most of the times, may be impossible to get analytic or exact results for the interaction of bodies in contact. In this thesis work, solution of the frictionless contact of an elastic body, touching to a rigid planar surface for two-dimensional elasticity
namely plane stress, plane strain and axi-symmetric formulations is aimed. The problem is solved numerically, with Finite Element Method, and an Object Oriented computer program in C++ for this purpose is written, and the results are verified with some basic analytic solutions and ABAQUS package program. It is not aimed in this thesis work to give a new solution in the area of solution of contact problems, but instead, it is aimed to form a strong basis, and computational library, which is extendible for further development of the subject to include friction, plasticity, and different material modeling in this advanced field of mechanics.

Los estilos APA, Harvard, Vancouver, ISO, etc.

41

Zhang, Lin. "Generalized finite element method for multiscale analysis". Diss., Texas A&M University, 2003. http://hdl.handle.net/1969.1/1141.

Texto completo

Resumen

This dissertation describes a new version of the Generalized Finite Element Method (GFEM), which is well suited for problems set in domains with a large number of internal features (e.g. voids, inclusions, etc.), which are practically impossible to solve using the standard FEM. The main idea is to employ the mesh-based handbook functions which are solutions of boundary value problems in domains extracted from vertex patches of the employed mesh and are pasted into the global approximation by the Partition of Unity Method (PUM). It is shown that the p-version of the Generalized FEM using mesh-based handbook functions is capable of achieving very high accuracy. It is also analyzed that the effect of the main factors affecting the accuracy of the method namely: (a) The data and the buffer included in the handbook domains, and (b) The accuracy of the numerical construction of the handbook functions. The robustness of the method is illustrated by several model problems defined in domains with a large number of closely spaced voids and/or inclusions with various shapes, including the heat conduction problem defined on domains with porous media and/or a real composite material.

Los estilos APA, Harvard, Vancouver, ISO, etc.

42

Ganendra, Dennis. "Finite element analysis of laterally loaded piles". Thesis, Imperial College London, 1993. http://hdl.handle.net/10044/1/7304.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

43

Chen, Yuan Liang. "Finite element analysis of reinforced concrete members". Thesis, University of Ottawa (Canada), 1985. http://hdl.handle.net/10393/4842.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

44

Nelson, Gregory Scott. "Finite element analysis of the interventricular septum". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0033/NQ38494.pdf.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

45

Nandula, Ramgopal. "Finite element analysis of eccentrically loaded angles". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0013/MQ52474.pdf.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

46

Bucci, Filippo. "Finite element analysis of repaired concrete structures". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0003/MQ40918.pdf.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

47

Valentin, Rodolfo V. "Finite element analysis of adhesively bonded joints". Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/17575.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

48

Gray, Hans. "Finite element analysis of the human tibia". Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.442458.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

49

Gislason, Magnus Kjartan. "Finite element analysis of the wrist joint". Thesis, University of Strathclyde, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.501701.

Texto completo

Resumen

The wrist is a very anatomically complex joint and little has been reported about the biomechanics of the wrist joint. Cadaveric measurements have been carried out to investigate the load transfer characteristics. Due to the complexity of the joint, analytical models are difficult to create, but the finite element method is generally employed to create a numerical model of the joint. Current finite element studies of the wrist have only looked at a small subset of the joint or created a simplified model using un-physiological boundary conditions. The presented work reports on the creation of subject specific models of the whole wrist, during gripping, using loading conditions obtained through biomechanical experiments in order to be able to predict in-vivo stresses in the wrist joint, with the wrist in three different positions: neutral position, radial deviation and ulnar deviation.

Los estilos APA, Harvard, Vancouver, ISO, etc.

50

Paw, G. F. "Parallel processing procedures for finite element analysis". Thesis, Swansea University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.638432.

Texto completo

Resumen

The objective of the research is to improve the solution capability of a finite element system by the use of parallel processing techniques. Initial research began with the transputer system at a time when the transputer was considered the ultimate parallel machine. The transputer based parallel program LINSUB was developed to solve linear static stress analysis problems using a modified Cholesky algorithm for substruturing. Further developments in this field were halted when it became clear that other parallel systems, namely, those concerned with workstation clusters, were moving rapidly ahead of the transputer in terms of performance and the transputer was rapidly becoming obsolete. Further work concentrated on parallel processing on workstation clusters in a local area network and the effectiveness of the Parallel Virtual Machine (PVM) used as the supportive parallel environment was investigated. This work was then extended onto a shared memory - MIMD system on the Silicon Graphics Power Challenge workstation. The program PARFEI (PARallel Finite Element Implementation) was developed for large linear static stress analyses and nonlinear analyses of elasto-plastic problems in particular, using a multifrontal approach based on domain decomposition techniques. An implementation based on a specially designed share memory (SM) synchronization concept was incorporated into the same program, so that PARFEI can run sequentially or in parallel using either PVM or SM. Performance tests were carried out on the workstation clusters using PVM and on the shared memory machine using PVM and SM. The results revealed that, in general, PVM performed better for the linear system and SM was the more efficient of the two when an incremental/iterative process was involved.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Tesis sobre el tema "Finite element analysis"

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros