Tesis sobre el tema "Energy efficiency management system"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte los 50 mejores tesis para su investigación sobre el tema "Energy efficiency management system".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Explore tesis sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.
Chen, Chia-Chi (Chia-Chi Jacky). "Improving energy efficiency : (turning wasted heat into cash flow)". Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/105306.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (page 62).
The following gaps in critical goals are derived through a direct comparison of the Needs to Goals transformation versus the current waste heat recovery solutions and their stated goals. 1. Critical: Implementation of a sustainable financial plan which can help to initiate an increase in waste heat recovery 2. Critical: Deployment of waste heat recovery strategies for reducing greenhouse emissions A proposed solution to achieve these two goals would be: 1. Purchasing waste heat from industries. 2. Storing this energy with our proprietary thermal storage materials. 3. Selling the stored energy at either industrial sites or to pricier markets. New thermal-storage materials and a mini-sized combined heat and power (CHP) system have been further developed. This system will be the first to involve the arbitrage of waste heat energy by using cheap thermal storage material (made with zero greenhouse emissions) and a mini generator. This system could play an important role in providing economic incentives for industries that wish to recover waste heat.
by Chia-Chi (Jacky) Chen.
S.M. in Engineering and Management
Lee, Heechang. "An analysis of the impact of datacenter temperature on energy efficiency". Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/76590.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (p. 65-66).
The optimal air temperature for datacenters is one of ways to improve energy efficiency of datacenter cooling systems. Many datacenter owners have been interested in raising the room temperature as a quick and simple method to increase energy efficiency. The purpose of this paper is both to provide recommendations on maximizing the energy efficiency of datacenters by optimizing datacenter temperature setpoint, and to understand the drivers of datacenter costs. This optimization and the potential energy savings used in cooling system can drive higher energy use in IT equipment and may not be a good trade off. For this reason, this paper provided a detailed look at the overall effect on energy of temperature changes in order to figure out the optimal datacenter temperature setpoint. Since this optimal temperature range varies by equipment and other factors in the datacenter, each datacenter should identify its appropriate temperature based on the optimization calculation in this paper. Sensitivity analysis is used to identify the drivers of the cost of ownership in a datacenter and to identify opportunities for datacenter efficiency improvement. The model is also used to evaluate potential datacenter efficiency.
by Heechang Lee.
S.M.in Engineering and Management
Kifleyesus, Biniam Okbaendrias. "Eneregy Management In Industries : Analysis of Energy Saving potential by Steam conedensate recovery". Thesis, Högskolan i Gävle, Energisystem, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-25090.
Texto completoSnowdon, David Computer Science & Engineering Faculty of Engineering UNSW. "Operating system directed power management". Awarded By:University of New South Wales. Computer Science & Engineering, 2010. http://handle.unsw.edu.au/1959.4/44747.
Texto completoGregg, Christopher B. "ALTERNATIVE ENERGY TESTBED ELECTRIC VEHICLE AND THERMAL MANAGEMENT SYSTEM INVESTIGATION". Ohio University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1187371346.
Texto completoQian, Hao. "A High-Efficiency Grid-Tie Battery Energy Storage System". Diss., Virginia Tech, 2011. http://hdl.handle.net/10919/29008.
Texto completoPh. D.
Kelly, Ryan L. "Optimizing gas generator efficiency in a forward operating base using an energy management system". Monterey, California: Naval Postgraduate School, 2013. http://hdl.handle.net/10945/34686.
Texto completoA Forward Operating Base (FOB) is designed to support combat operations in an austere environment, which often lacks pre-existing infrastructure. On-site diesel generators are the primary source of FOB electricity. Traditionally, each generator is connected to its own set of loads and operates independently from other generators. The benefits of transitioning from traditional generator employment to an alternative architecture using an Energy Management System (EMS) were investigated in this thesis. The EMS provides an interface between power sources, loads, and energy storage elements to form a microgrid. Using power electronics and programmable logic, the EMS provides capabilities such as power source selection, power metering, flow control, and peak power management. These capabilities enable more efficient generator utilization by matching real time load demand to the smallest capable power source, reducing overall fuel consumption. The EMS offers redundancy as it can connect any one of multiple power sources to critical loads. A hardware-based laboratory experiment demonstrated the ability to transition from one power source to another while providing uninterrupted current to the load. The results of the experiment validate a Simulink model of the EMS. An example load profile was applied to the model to compare overall fuel consumption between the traditional architecture and EMS-enabled microgrid.
DARABNIA, BEHNOUSH. "An Interactive Decision Support System for Energy Management in Process Industry". Doctoral thesis, Politecnico di Torino, 2013. http://hdl.handle.net/11583/2507375.
Texto completoLi, Haoming. "Fiber-connected massively distributed antenna systems : energy efficiency and interference management". Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45199.
Texto completoButt, Nathaniel J. "Development and Thermal Management of a Dynamically Efficient, Transient High Energy Pulse System Model". Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1527602141695356.
Texto completoÅkerblom, Signe. "Improving energy performance within the framework of the Energy Efficiency Directive". Thesis, KTH, Energisystemanalys, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-171199.
Texto completoFranklin, James G. "Systemic impediments to constructing energy-efficient commercial buildings". Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/100372.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (pages 71-72).
Exploring a systems-based view of the energy efficiency roadblocks faced by financiers, builders, owners, and tenants. In 1992 Amory Lovins, founder of the Rocky Mountain Institute, wrote a paper entitled "Energy-Efficient Buildings: Institutional Barriers and Opportunities". In it, he detailed roadblocks to constructing energy efficient commercial buildings- from the fear of lenders to finance the unknown, to developers unmotivated to instill efficiency, to mechanical engineers specifying job-securing (and commission-increasing) safety margins when (over)sizing the apparati- every step of a commercial building's genesis is fraught with status quo and timidity. Now, almost 25 years later, we will take a look at what has changed, what hasn't, and what areas still need incentivizing to get on a sustainable track towards efficiency. We model the systems to exhibit the persistent resistance to changes, the extraordinary pace with which some markets have embraced change, and the feedback mechanisms that can make efficiency both possible and profitable.
by James G. Franklin.
S.M. in Engineering and Management
Keville, Kurt (Kurt Lawrence). "Green HPC : a system design approach to energy-efficient datacenters". Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/67557.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (p. 63-65).
Green HPC is the new standard for High Performance Computing (HPC). This has now become the primary interest among HPC researchers because of a renewed emphasis on Total Cost of Ownership (TCO) and the pursuit of higher performance. Quite simply, the cost of operating modern HPC equipment can rapidly outstrip the cost of acquisition. This phenomenon is recent and can be traced to the inadequacies in modern CPU and Datacenter systems design. This thesis analyzes the problem in its entirety and describe best practice fixes to solve the problems of energy-inefficient HPC.
by Kurt Keville.
S.M.in Engineering and Management
Ababneh, Majdi M. "Design of Micro-Scale Energy Harvesting Systems for Low Power Applications Using Enhanced Power Management System". Scholar Commons, 2018. http://scholarcommons.usf.edu/etd/7117.
Texto completoPardo, García Nicolás. "Energy efficiency improvement of hybrid ground coupled HVAC systems from thermal energy generation and storage management". Doctoral thesis, Universitat Politècnica de València, 2009. http://hdl.handle.net/10251/6065.
Texto completoPardo García, N. (2009). Energy efficiency improvement of hybrid ground coupled HVAC systems from thermal energy generation and storage management [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/6065
Palancia
Enefalk, Tommy. "Improvements to Thermal Management System for Automotive Components". Thesis, KTH, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-244321.
Texto completoDen globala uppvärmningen medför stora utmaningar, och de antropogena växthusgasutsläppen måste minskas genom aktiva åtgärder. Transportsektorn är en av de viktigaste sektorerna där avsevärda utsläppsminskningar eftersträvas. I ett fordon är kylsystemet ett delsystem avsett att kontrollera temperaturen på komponenter som är viktiga för fordonets funktion. Att sänka kylsystemets effektförbrukning är ett av flera möjliga sätt att minska fordonets miljöpåverkan. Den här rapporten utgår från ett befintligt referenskylsystem, med tre separata kretsar som arbetar vid olika temperaturnivåer. Syftet är att föreslå förbättringar för att öka energieffektiviteten, samt minska antalet komponenter i systemet. Potentiella förbättringar identifieras genom en litteraturstudie, och utvärderas därefter en efter en. Efter denna utvärdering väljs fyra förbättringar ut: För det första, en vätskevärmeväxlare i högtemperaturkretsen, med anslutningar till både mellan- och lågtemperaturkretsen. För det andra, gemensamma mellan- och lågtemperaturkylare, som kan fördelas mellan kretsarna efter behov. För det tredje, röranslutningar för överföring av kylvätska mellan låg- och mellantemperaturkretsen. Slutligen, en vätskekyld kondensor i det aktiva kylsystemet, vilken kyls av mellantemperaturkretsen. Resultatet är ett kylsystem med flexibel tilldelning av kylare, jämnare fördelning av värmeförluster, möjlighet att värma komponenter med förlustvärme från andra komponenter, samt en kylare mindre än referenssystemet. Som sista steg genomförs en helsystemsutvärdering, för att hitta det mest fördelaktiga sättet att placera komponenterna i förhållande till varandra. Stationära beräkningar utförs i MATLAB, med fem olika driftfall som indata. Av sex olika utformningar rekommenderas en för drift med hög belastning, och en annan för drift med lägre belastning. Skillnaden mellan dem är kondensorns placering, på grund av att en låg kondensationstemperatur bör prioriteras vid låg belastning men inte vid hög belastning. Den största osäkerheten i tillvägagångssättet är de stationära beräkningarna, som inte helt motsvarar verkliga körfall, samt approximationer som gjorts vid brist på indata. För framtida arbete rekommenderas verifiering av dessa resultat genom transienta simuleringar och praktiska tester. Att ta bort en av högtemperaturkylarna och/eller minska storleken på mellantemperaturkylaren kan också undersökas. Även integration med kupéns värme- och kylsystem, vilket ligger utanför ramen för denna rapport, är ett relevant område för fortsatta undersökningar. Genom att föreslå förbättringar av ett delsystem i ett fordon strävar denna rapport efter att åstadkomma förbättringar på liten skala, men också att bidra till en pågående omvandling på den globala skalan.
Wilhelmsson, Jessica y Signe Åkerblom. "Improving energy performance within the framework of the Energy Efficiency Directive". Thesis, KTH, Industriell ekonomi och organisation (Inst.), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-168738.
Texto completoIt is necessary for large companies to understand and be able to adapt to the industrial Transformation towards an increasing focus on energy efficiency, which takes place today. The Energy Efficiency Directive (EED)issued by the European Union has enlarged the focus on working with energy efficiency within large companies. Further, the Swedish government has introduced the law about energy auditing in large companies, which is based on the EED. These regulations encourage companies to develop a management system that includes requirements on conducting energy audits and propose cost Deffective measures. Energy efficiency is already an important aspect within many companies environmental work, however a more developed and systematic approach to energy efficiency than most companies already have is needed in order to fulfill the legal requirements. The Company investigated in this study is one the worlds leading technology companies with more than 9000 employees in Sweden. Currently, they have energy as a significant aspect in their environmental work according to the international management system standard ISO 14001. Today they are also developing their energy work by conducting energy audits in order to comply with the new legislation. This gives a mor detailed view of the energy use and potential improvements that can be done, but in order to ensure continual improvements over a long period of time further measures are needed. Within this study it was investigated what measures a large company needs to implement in order to increase their energy performance and comply with the legislation. By a literature review focusing on management systems as well as interviews within the Company, a complementary study with two companies covered by the EED and three expert interviews, five key factors were identified. These factors are, top management commitment, awareness, goals, measurements and evaluation. A model was then developed aligning these factors. Further, concrete proposals for action to manage these factors were presented. By!increasing focus on these key factors and implement proposed measures companies will increase their energy performance and also make the organization aware of how actions affect a company’s energy performance
McKenney, Kurtis G. (Kurtis Gifford) 1979. "Sustainable approach to achieving energy efficiency in manufacturing operations". Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/73387.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (p. 75-76).
Energy management in industrial facilities is becoming increasingly popular as firms attempt to become more environmentally responsible and reduce cost by improving operational efficiency. Raytheon is a leader in their industry in energy management, and they view the initiative as a way to become more competitive along with being environmentally responsible. The goal of this project was to develop a framework for achieving sustainable cost reduction in production operations through energy efficiency. The energy efficiency framework will build off the existing lean and six sigma tools and philosophies in an attempt to accelerate acceptance and deployment by using a common language and proven methods in the company and industry. A 1.6 million square foot manufacturing facility at Raytheon IDS consumed $13 million of energy (90% electric) in 2010, 75% of which was consumed directly by production equipment. The equipment is diffuse, highly specialized, and used in "high mix, low volume" manufacturing. The challenge with improving production energy efficiency in this environment is that it requires a combination of technology improvements, processes modifications, and changes in the way employees conduct their work every day. The project's success relied on cross-functional (i.e., operations, engineering, and facilities) engagement from senior management to front-line operators. To sustain results, energy performance metrics were designed to keep production area leaders engaged and allow management to set progressive goals over time and reward success. The proposed metrics use a combination of tracked energy use and a "best practice" scorecard that promotes proactive engagement. Lean "Energy Gemba Walks" were initiated to generate and manage best practices and to share knowledge among production areas. The implementation phase of the pilot project (October and November 2011) resulted in an 18% energy reduction compared with the average for the year. Meanwhile, production output and total labor hours were up 18% and 11%, respectively, during the pilot, while the product mix remained constant throughout the year. The improvements, if sustained, correspond to a $74,000 per year cost savings in the pilot area.
by Kurtis McKenney.
S.M.
M.B.A.
Schroeder, Frederick William. "Energy efficiency opportunities in mine compressed air systems / F.W. Schroeder". Thesis, North-West University, 2009. http://hdl.handle.net/10394/4913.
Texto completoThesis (M.Ing. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2010.
Yu, Wenhe. "Approaches to energy efficiency in China’s large-scale public building". Thesis, KTH, Industriell ekologi, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-58641.
Texto completoSamadiani, Emad. "Energy efficient thermal management of data centers via open multi-scale design". Diss., Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/37218.
Texto completoYang, Simei. "Run-Time Management for Energy Efficiency of Cluster-Based Multi/Many Core Systems". Thesis, Nantes, 2020. http://www.theses.fr/2020NANT4004.
Texto completoCluster-based multi/many-core platforms represent promising solutions to deliver high computing performance and energy efficiency in modern embedded systems. These platforms often support per-cluster Dynamic Voltage/Frequency Scaling (DVFS), allowing different clusters to change their own v/f levels independently. The increasing application complexity and application dynamism on such platforms arise the need for run-time management. This dissertation focuses on the run-time management of applications on clusterbased multi/many-core systems to improve energy efficiency. Towards the run-time management purpose, this dissertation presents different management strategies that estimate the mutual influence between application mapping and cluster v/f configurations to respectively achieve local optimization within a cluster and global optimization in the overall system. The proposed management strategies can achieve near-optimal management solutions with less strategy complexity compared to state-of-theart strategies. ln addition, this dissertation presents a new modelling and simulation approach that allows the evaluation of run-time management strategies in multi/many-core systems to guarantee that system constraints are fully met. The proposed simulation approach is validated using an industrial modelling and simulation framework
Tolentino, Matthew Edward. "Managing Memory for Power, Performance, and Thermal Efficiency". Diss., Virginia Tech, 2009. http://hdl.handle.net/10919/26301.
Texto completoPh. D.
Nathuji, Ripal. "Mechanisms for coordinated power management with application to cooperative distributed systems". Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24646.
Texto completoCommittee Chair: Schwan, Karsten; Committee Co-Chair: Yalamanchili, Sudha; Committee Member: Lee, Hsien-Hsin Sean; Committee Member: Loh, Gabriel; Committee Member: Madisetti, Vijay; Committee Member: Owen, Henry
Van, Tonder Adriaan Jacobus Marthinus. "Sustaining compressed air DSM project savings using an air leakage management system / A.J.M. van Tonder". Thesis, North-West University, 2010. http://hdl.handle.net/10394/4458.
Texto completoThesis (M.Ing. (Electrical and Electronic Engineering))--North-West University, Potchefstroom Campus, 2011.
Saha, Avijit. "Development of a Software Platform with Distributed Learning Algorithms for Building Energy Efficiency and Demand Response Applications". Diss., Virginia Tech, 2017. http://hdl.handle.net/10919/74423.
Texto completoPh. D.
Wenhe, Yu. "Approaches to energy efficiency in China’s large-scale public building". Thesis, KTH, Industriell ekologi, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-33523.
Texto completowww.ima.kth.se
Levihn, Fabian. "Investments, system dynamics, energy management and policy : a solution to the metric problem of bottom-up supply curves". Doctoral thesis, KTH, Hållbarhet och industriell dynamik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-161904.
Texto completoKlimatfrågan och konkurrens om knappa resurser medför ett förändringstryck på nationer och företag. Att hantera förändringar har aldrig varit enkelt, vilket är tydligt bland företag inom energisektorn såsom el och fjärrvärmeproducenter. Energisystemen dessa företag är del av har stark intern dynamik, men även dynamik mellan olika energisystem är vanligt. Detta måste tas i beaktande när strategier och planer för att hantera förändring utformas. Under början av 1980-talet skapades en optimeringsmodell baserad på den nationalekonomiska jämviktsmodellen för att kunna utvärdera olika specifika möjligheter att nå ett mål, t.ex. energibesparingar. Denna modell, som idag ofta benämns MACC (Marginal Abatement Cost Curves) eller CSC (Concervation Supply Curves), används idag av akademin, industrin och myndigheter inom områden så som energibesparingar, minskade CO2-utsläpp, sophantering och design av ekonomiska policyinstrument. De icke-akademiska användarna inkluderar FNs klimatorgan IPCC, IEA och Världsbanken. Även konsultfirman McKinsey&Company använder modellen regelbundet i olika studier. Tyvärr har modellen många begräsningar när det kommer till att hantera dynamiker mellan de specifika åtgärder som identifierats för att nå ett mål. Den allvarligast begränsningen utgörs dock av ett optimeringsfel som leder till felaktiga slutsatser om prioriteringen mellan de åtgärder som har en negativ marginalkostnad. Som en lösning på detta problem har pareto-optimering föreslagits, vilket denna avhandling dock visar är problematiskt på grund av de dynamiker som finns inom och mellan energisystem. Det övergripande syftet med denna avhandling är att förbättra möjligheten att hantera förändringar och nå uppsatta mål. Specifikt diskuteras hur beroenden mellan olika åtgärder för att nå det satta målet kan hanteras. Avhandlingen adresser även problemet att prioritera mellan åtgärder med negativ marginalkostnad. Utöver detta bidrar avhandlingen med praktiska implikationer för politiker, myndigheter och företag involverade i fjärrvärmeproduktion i Stockholm. Slutsatser dras kring energibesparingar och minskade utsläpp av CO2, SOx och NOx. Praktiska implikationer ges även för hur system som detta fjärrvärmesystem samverkar och interagerar med det nordiska elsystemet.
QC 20150414
Investments in energy efficiency and climate change abatement: revising marginal cost curves as an optimization model
Goyal, Nitesh. "Macro-modeling and energy efficiency studies of file management in embedded systems with flash memory". Texas A&M University, 2005. http://hdl.handle.net/1969.1/3766.
Texto completoChen, Chen y Paul Torstensson. "Environmental management system's impact on corporate social responsibility : A case study of a multinational company operating in China". Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-35354.
Texto completoFöretag stöter på allt fler utmaningar inom miljöområdet och inte minst när det gäller att utvärdera energianvändning och minimera miljöpåverkan. Denna uppsats handlar om hur miljöledningssystemet påverkar energieffektivitet samt om det kan bidra till en hållbar utveckling och kan leda till ett ökat samhällsansvar. Metodiken utgörs av en fallstudie på ett multinationellt företag, och det empiriska materialet är hämtat från en av koncernens fabriker i Kina. Det teoretiska ramverket omfattar huvudsakligen följande tre konsept: hållbar utveckling, företags samhällsansvar samt miljöledningssystem. Uppsatsen resulterar i ett förslag på beräkningsmodell för att utvärdera hur miljöledningssystemet har påverkat energieffektiviteten. Denna modell samt vilka faktorer som ligger bakom förändringar i energieffektivitet analyseras genom det empiriska materialet. Slutsatsen är att fallstudieföretaget har, genom ökad personalträning och uppgraderad produktionsanläggning, lyckats att öka energieffektiviteten med avseende på alla energikällor förutom vatten.
企业面临更多的挑战在环境领域,尤其当涉及到评估能源使用,并尽量减少对环境的影响。这份报告是关于如何管理环境影响能源效率,这有助于实现可持续发展,并可能导致更大的社会责任。使用的方法是多的国际企业的案例研究和实证材料取自该公司在中国的业务。该理论框架包括可持续发展,企业社会责任和环境管理。论文导致提出的模型计算来评估环境管理体系影响能源效率。这种模式的背后改变能源效率的因素是由经验材料进行分析。得出的结论是,案例研究公司,通过增加人员培训和升级生产设施,管理,以提高能源利用效率相对于除水以外的所有来源。
Cerra, Noemi. "An Energy Management Oriented Analysis: Case Study of a Waste to Energy Plant in Lecco, Italy". Thesis, KTH, Kraft- och värmeteknologi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-250665.
Texto completoISO 50001-standarden för energihanteringssystem släpptes 2011 för att ge organisationer en standardiserad riktlinje för utvärdering och kontinuerlig förbättring av energiprestanda. Komplexa strukturer som sektorn för avfall till energi (WTE), som måste uppfylla målen socialt, miljömässigt, ekonomiskt och produktivt, kan dra nytta av utvecklingen av ett kompatibelt energihanteringssystem (EnMS). Energieffektivitet och energibesparingar bidrar till att mildra den stora kostnaden för en sådan anläggning, medan jämförelseanalysen gör det möjligt att verifiera systemets tillstånd och de potentiella förbättringsområdena. Förbättringen av energiprestanda kan värderas på en miljöbas, och en korrekt främjande av processen kan bidra till att mildra social opposition. Denna avhandling granskar energiprestanda för ett slöseri till en energianläggning i Lecco, Italien, med hjälp av den information som finns tillgänglig från det styrsystem som redan är installerat i företaget. Regressionsanalys används för att passa linjära och polynomiska funktionsformer till energiförbrukningsdata och skapa energigrundnivå för områdena med betydande energianvändning och produktion med en prediktiv effekt på 59-92%. Skillnaden mellan baslinjen och den faktiska energiförbrukningen föreslås som indikator för energiprestanda för att uppskatta resultaten av förbättringsmöjligheterna och en uppsättning nyckelresultatindikatorer utvärderas för intern och extern riktmärkning av anläggningen. Den ekonomiska möjligheten för ett urval av sektorns bästa tillgängliga teknik (BAT) och den därmed sammanhängande förbättringen av energieffektiviteten utvärderas, vilket visar att 2 - 16 miljoner euro kan investeras i systemets eftermontering. skapandet av synergier med anläggningens uppvärmning, kylning och el efterfrågan föreslås också. Slutligen föreslås en energi-, ekonomisk och miljöanalys som ett rankningssystem för de identifierade förbättringsmöjligheterna. Metoden och resultaten av denna studie är avsedda att ge en ordentlig energianalyse för Silea Spa, föreslå ett granskningsförfarande för andra WTE-anläggningar som är villiga att utveckla en kompatibel ENMS och berika litteraturen med en fallstudie om WTE. För det italienska sammanhanget, som för närvarande står inför svårigheter i moderniseringen av avfallshanteringssystemet (WMS), erbjuder ISO 50001-tillämpningen på WTE-anläggningar en enhetlig struktur som kan användas av regeringen för att kartlägga nuvarande status för varje anläggning och utveckla den rättsliga ramen i enlighet med WMS, den cirkulära ekonomins och den allmänna opinionens behov.
Shelor, Charles F. "Dataflow Processing in Memory Achieves Significant Energy Efficiency". Thesis, University of North Texas, 2018. https://digital.library.unt.edu/ark:/67531/metadc1248478/.
Texto completoFarhadi, Mustafa. "Hybrid Energy Storage Implementation in DC and AC Power System for Efficiency, Power Quality and Reliability Improvements". FIU Digital Commons, 2016. http://digitalcommons.fiu.edu/etd/2471.
Texto completoEtinski, Maja. "DVFS power management in HPC systems". Doctoral thesis, Universitat Politècnica de Catalunya, 2012. http://hdl.handle.net/10803/96192.
Texto completoEl aumento de rendimiento que han experimentado los sistemas de altas prestaciones ha venido acompañado de un aumento aún mayor en el consumo de energía. El consumo de los supercomputadores actuales implica unos costes muy altos de funcionamiento. Estos costes no tienen simplemente implicaciones a nivel económico sino también implicaciones en el medio ambiente. Dado la importancia del problema, en los últimos tiempos se han realizado importantes esfuerzos de investigación para atacar el problema de la gestión eficiente de la energía que consumen los sistemas de supercomputación. Dado que la CPU supone un alto porcentaje del consumo total de un sistema, nuestro trabajo se centra en la reducción y gestión eficiente de la energía consumida por la CPU. En concreto, esta tesis se centra en la viabilidad de realizar esta gestión mediante la técnica de Dynamic Voltage Frequency Scalingi (DVFS), una técnica ampliamente utilizada con el objetivo de reducir el consumo energético de la CPU. Sin embargo, esta técnica puede implicar una reducción en el rendimiento de las aplicaciones que se ejecutan, ya que implica una reducción de la frecuencia. Si tenemos en cuenta que el contexto de esta tesis son sistemas de alta prestaciones, minimizar el impacto en la pérdida de rendimiento será uno de nuestros objetivos. Sin embargo, en nuestro contexto, el rendimiento de un trabajo viene determinado por dos factores, tiempo de ejecución y tiempo de espera, por lo que habrá que considerar los dos componentes. Los sistemas de supercomputación suelen estar gestionados por sistemas de colas. Los trabajos, dependiendo de la política que se aplique y el estado del sistema, deberán esperar más o menos tiempo antes de ser ejecutado. Dado las características del sistema objetivo de esta tesis, nosotros consideramos que el Planificador de trabajo (o Job Scheduler), es el mejor componente del sistema para incluir la gestión de la energía ya que es el único punto donde se tiene una visión global de todo el sistema. En este trabajo de tesis proponemos un conjunto de políticas de planificación que considerarán el consumo energético como un recurso más. Estas políticas decidirán que trabajo ejecutar, el número de cpus asignadas y la lista de cpus (y nodos) sino también la frecuencia a la que estas cpus se ejecutarán. Estas políticas estarán orientadas a dos objetivos: reducir la energía total consumida por un conjunto de trabajos y controlar en consumo puntual de un conjunto puntual para evitar saturaciones del sistema en aquellos centros que puedan tener una capacidad limitada (permanente o puntual). El primer grupo de políticas intentará reducir el consumo total minimizando el impacto en el rendimiento. En este grupo encontramos una primera política que asigna la frecuencia de las cpus en función de la utilización del sistema y una segunda que calcula una estimación de la penalización que sufrirá el trabajo que va a empezar para decidir si reducir o no la frecuencia. Estas políticas han mostrado unos resultados aceptables con sistemas poco cargados, pero han mostrado unas pérdidas de rendimiento significativas cuando el sistema está muy cargado. Estas pérdidas de rendimiento no han sido a nivel de incremento significativo del tiempo de ejecución de los trabajos, pero sí de las métricas de rendimiento que incluyen el tiempo de espera de los trabajos (habituales en este contexto). El segundo grupo de políticas, orientadas a sistemas con limitaciones en cuanto a la potencia que pueden consumir, han mostrado un gran potencial utilizando DVFS como mecanismo de gestión. En este caso, comparado con un sistema que no incluya esta gestión, han demostrado mejoras en el rendimiento ya que permiten ejecutar más trabajos de forma simultánea, reduciendo significativamente el tiempo de espera de los trabajos. En este segundo grupo proponemos una política basada en el rendimiento del trabajo que se va a ejecutar y una segunda que considera la asignación de todos los recursos como un problema de optimización lineal. Esta última política es la contribución más importante de la tesis ya que demuestra un buen comportamiento en todos los casos evaluados. La última contribución de la tesis es un estudio del potencial de DVFS como técnica de gestión de la energía en un futuro próximo, en función de un estudio de las características de las aplicaciones, de la reducción de DVFS en el consumo de la CPU y del peso de la CPU dentro de todo el sistema. Este estudio indica que la capacidad de DVFS de ahorrar energía será limitado pero sigue mostrando un gran potencial de cara al control del consumo energético.
Castro, Renato Ely. "Plataforma automatizada e normatizada de monitoração, verificação e gestão de índices de energia". reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2014. http://hdl.handle.net/10183/96660.
Texto completoThis work describes the requirements for the definition, implementation, maintenance and improvement of energy management systems in the industrial environment with a systematic approach concerning continuous improvement routines for energy efficiency. For this purpose, it was proposed the establishment of a framework based on automation to implement monitoring, verification and management of energy resources compatible with a standardized energy management system, including requirements for energy use and consumption, in addition to monitoring, documentation, communication, project best practices, equipment acquisition, systems, processes and human resources involved in energy performance. The strategy of energy use analysis proposed in this work is based on the methodology of monitoring and targeting that consists of a systematic approach in the use of energy resources in order to achieve the best economic result through the permanent management of energy consumption. Furthermore, this work includes that system as a procedure in the planning phase of ISO50001 standard which establishes the concepts for energy management systems implementation. In order to aggregate all tools associated to this scenario, this paper proposes the use of a supervisory tool integrated to a real-time software (Soft-PLC) that runs the control application and a factory floor distributed system automation hardware in an IEC61131 compatible environment. The project of the control application of energy use was conducted using different programming languages defined in IEC to perform all the procedures of measurement, monitoring and management required by the system, including comparative analysis with the "best practices", use of innovative technologies, product and service approach, energy audit and compliance with regulatory milestones. The expected results of adopting an automation-based platform for energetic management include system flexibility, adaptability and usability. Besides, a project of automation in this scenario of open platform tends to introduce lower development and deployment costs.
Diaz, Castañeda Jenny Lorena. "Advanced energy management/control strategies for smart manufacturing systems". Doctoral thesis, TDX (Tesis Doctorals en Xarxa), 2020. http://hdl.handle.net/10803/672058.
Texto completoEsta tesis se basa en el estudio de las técnicas de control basadas en optimización para el diseño de estrategias de control que mejoren la eficiencia energética de los sistemas de manufactura inteligentes. La industria de manufactura se está transformando hacia sistemas de manufactura inteligentes, flexibles y eficientes energéticamente, que requiere de estructuras modulares y reconfigurables para poder responder a los cambios en la programación de la producción y la demanda de piezas. Así, se deben diseñar sistemas de control que cumplan los requerimientos de dicha transformación mientras minimizan el consumo de energía y maximizan la rentabilidad de la planta. En este sentido, los controladores basados en optimización son adecuados para el diseño de sistemas de control que minimicen el consumo de energía de dichos sistemas mientras mantienen su productividad teniendo en cuenta los factores que los afectan. Primero, se presentan como las técnicas de control basadas en optimización pueden contribuir a hacer frente a los desafíos impuestos por la industria de manufactura. Con base en esta revisión, la industria manufacturera se clasifica por niveles, nivel de máquina, línea de proceso, y planta, para el diseño de controladores basados en optimización. Además, para diseñar estrategias de control que no afecten la productividad de la planta, se propone una clasificación para estos sistemas en función de las operaciones realizadas. Con base en estas clasificaciones, se diseñan estrategias de control que minimicen el consumo de energía de los sistemas de manufactura o los costos asociados a dicho consumo. A los niveles de maquina y línea, se diseñaron estrategias de control para minimizar el consumo de energía de los sistemas de manufactura con base en el enfoque de control predictivo basado en modelo. Las estrategias propuestas se basan en la gestión independiente de aquellos dispositivos que no están directamente relacionados con las operaciones de mecanizado. Por lo tanto, modelos de consumo de energía fueron necesarios para predecir el perfil del consumo de energía de estos sistemas y, a partir de esto, seleccionar los instantes de activación/desactivación de los dispositivos manipulados que minimicen el consumo de energía y garanticen el correcto funcionamiento de dichos sistemas. Dado que al nivel de línea el tamaño y la complejidad de estos sistemas aumenta, se propone a una estrategia de control basada en dos modos de control para reducir la carga computacional mediante la conmutación de un modo de control basado en optimización a un modo autónomo que no requiere optimización. Dada la necesidad de sistemas de manufactura flexibles y reconfigurables, estrategias de control no centralizadas se proponen para minimizar el consumo de dichos sistemas a los niveles más altos. Para este fin, los sistemas de manufactura se dividieron en subsistemas, y se diseñaron controladores locales de tipo cooperativo y no cooperativo usando métodos alternativos de dirección de multiplicadores para resolver los problemas de optimización. Además, debido a la naturaleza de los objetivos de control propuesto, se propuso una forma de establecer el consenso entre los controladores locales con dinámicas acopladas. Finalmente, a nivel de planta, se diseñan estrategias de control con base en el enfoque control predictivo basado en modelo económico para maximizar la rentabilidad de la planta. A este nivel, los objetivos de control se centran en determinar la programación de la producción óptima que deberán seguir las estrategias de control diseñadas a niveles más bajos. Así, la programación de la producción de la planta se determina teniendo en cuenta la demanda de piezas, el consumo de energía total, y el mercado energético con sus fluctuaciones. Las estrategias de control propuestas en esta tesis se probaron en simulación considerando diferentes escenarios diseñados con base en la operación real de una planta de fabricación de piezas automotrices.
Aquesta tesi es centra principalment en l’estudi de les tècniques de control basades en optimització per al disseny d’estratègies que contribueixin a millorar l’eficiència energètica dels sistemes de manufactura intel·ligents. Actualment, la indústria manufacturera està experimentant una transformació cap a sistemes de manufactura intel·ligents, flexibles i eficients energèticament, impulsada pels avenços en dispositius de mesura, gestió de dades i eines de comunicació i connectivitat. Aquesta transformació requereix que els sistemes de manufactura siguin modulars i reconfigurables per poder respondre als canvis en la programació de la producció i de la demanda i disseny de les peces mentre continuen operant de manera eficient i sostenible. Per tant, per tal d’assolir una indústria de manufactura m’és intel·ligent, s’han de dissenyar sistemes de control adequats que permetin complir els requeriments d’aquesta transformació, així com també minimitzar el consum d’energia i maximitzar la rendibilitat de la planta. En aquest sentit, els controladors basats en optimització i les arquitectures de control no centralitzat podrien ser adequats per al disseny de sistemes de control que contribueixin a minimitzar el consum d’energia total d’aquests sistemes mentre mantenen la seva productivitat i tenen en compte les restriccions operatives i els factors externs que afecten aquests sistemes. Per tant, mitjançant l’ús d’estratègies de control avançat, els sistemes de control poden ser degudament actualitzats per incloure la informació sobre els canvis en l’operació dels sistemes de manufactura, així com també la variació del mercat energètic per minimitzar els costos d’energia durant l’operació de la planta. Primer, en aquesta tesi, es presenten i discuteixen les estratègies actualment implementades en la indústria manufacturera per millorar la seva eficiència energètica. En base a aquesta revisió, s’identifiquen les principals bretxes de recerca en aquest camp i es discuteix com les tècniques de control basades en optimització poden contribuir a fer front als desafiaments imposats per la nova era de la indústria manufacturera (Industry 4.0). Recolzant-se en la revisió de la literatura, es proposa classificar la indústria manufacturera per nivells, considerant el nivell de màquina, línia de procés i planta, per al disseny de controladors basats en optimització. A més, per tal de dissenyar estratègies de control que no afectin la productivitat de la planta, és a dir, el nombre de peces processades per unitat de temps, els elements constitutius dels sistemes de manufactura també es classifiquen en dispositius de mecanitzat i perifèrics en funció de les operacions realitzades. Els elements de la primera classe corresponen a aquells que estan directament involucrats en les operacions de mecanitzat, mentre que els de la segona classe són aquells que s’encarreguen de proveir els recursos requerits pels dispositius de mecanitzat. Després, en base a aquesta classificació, es proposen estratègies de control en cada nivell per minimitzar el seu consum d’energia o els costos associats a aquest consum. Per als nivells de màquina i línia de procés, es dissenyen estratègies de control per minimitzar el consum d’energia dels sistemes de manufactura en base a l’enfocament de control predictiu basat en model. Les estratègies proposades es basen en la idea de gestionar de manera independent els dispositius (o sistemes) perifèrics per tal de no afectar el temps de processament de les màquines tot mantenint l’operació dels dispositius de mecanitzat. Per tant, calen models de consum d’energia per a predir el perfil de consum d’energia dels sistemes de manufactura i, en base a aquesta predicció, seleccionar els instants d’activació / desactivació per als dispositius manipulats a partir dels quals es minimitzi el consum d’energia total i es pugui garantir el correcte funcionament d’aquests sistemes. D’altra banda, atès que al nivell de línia de procés la mida i la complexitat dels sistemes de manufactura augmenta, es proposa una estratègia de control basada en dos modes de control per tal de reduir la càrrega computacional i dissenyar controladors que puguin ser implementats en temps real. En aquest sentit, tenint en compte que els sistemes de manufactura presenten un comportament diari, es proposa un algoritme per detectar la periodicitat d’aquests sistemes i, després, commutar a un mode de control autònom que no requereixi resoldre un problema d’optimització en línia. D’altra banda, donada la necessitat de sistemes de manufactura flexibles i reconfigurables, es proposen estratègies de control no centralitzades per minimitzar el consum d’energia dels sistemes de fabricació als nivells més alts. Amb aquesta finalitat, els sistemes de manufactura es divideixen en subsistemes, i es dissenyen controladors locals de tipus cooperatiu i no cooperatiu utilitzant mètodes alternatius de direcció de multiplicadors per resoldre els problemes d’optimització de manera distribuïda. A més, a causa de la naturalesa de l’objectiu de control proposat, el qual està enfocat en minimitzar el consum d’energia dels sistemes de manufactura, es proposa una forma d’establir el consens entre els controladors locals amb dinàmiques acoblades. Després, les estratègies de control proposades són extrapolades al nivell de planta usant objectius de tipus econòmic, i es comparen les arquitectures de control centralitzat i no centralitzat pel que fa al seu acompliment en llac¸ tancat i la càrrega computacional requerida per trobar una solució. Finalment, a nivell de planta, es dissenyen estratègies de control en base a l’enfocament de control predictiu basat en model econòmic per tal de maximitzar la rendibilitat de la planta i minimitzar els costos associats a la seva operació. Per tant, a aquest nivell, els objectius de control se centren a determinar la programació de la producció òptima de la planta que hauran de seguir les estratègies de control dissenyades als nivells més baixos. En aquest sentit, la programació de la producció de la planta és determinada tenint en compte la demanda actual de peces, el consum d’energia dels sistemes de manufactura i el mercat energètic amb les seves fluctuacions. Totes les estratègies de control proposades en aquesta tesi es proven en simulació considerant diferents escenaris basats en l’operació real d’una planta de fabricació de peces automotrius.
Lehner, Wolfgang. "Energy-Efficient In-Memory Database Computing". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-115547.
Texto completoMassana, i. Raurich Joaquim. "Data-driven models for building energy efficiency monitoring". Doctoral thesis, Universitat de Girona, 2018. http://hdl.handle.net/10803/482148.
Texto completoA dia d’avui l’energia és un bé completament necessari arreu del món. Degut als avantatges que presenta en el transport i a les necessitats de les llars i la indústria, l’energia és transformada en energia elèctrica. Tenint en compte la total expansió i domini de l’electricitat, iniciatives com Horitzó 2020, tenen per objectiu un futur més sostenible: reduint les emissions de carboni i el consum i incrementant l’ús de renovables. Partint dels defectes de la xarxa elèctrica clàssica, com són gran distància al punt de consum, poca flexibilitat, baixa sostenibilitat, baixa qualitat de l’energia, dificultats per a emmagatzemar energia, etc. apareixen les Smart Grid (SG), una evolució natural de la xarxa clàssica. Un dels principals elements que permetrà a les SG millorar les xarxes clàssiques és l’Energy Management System (EMS). Així doncs, per a que l’EMS pugui dur a terme la gestió dels diversos elements, una de les necessitats bàsiques dels EMS serà un sistema de predicció, o sigui, saber per endavant quin consum hi haurà en un entorn determinat. A més, les empreses subministradores d’electricitat també requeriran de prediccions per a gestionar la generació, el manteniment i fins i tot les inversions a llarg termini. Així doncs ens calen sistemes de predicció del consum elèctric que, partint de les dades disponibles, ens subministrin el consum que hi haurà d’aquí a unes hores, uns dies o uns mesos, de la manera més aproximada possible. És dins d’aquest camp on s’ubica la recerca que presentem. Degut a la proliferació de xarxes de sensors i computadors més potents, s’han pogut desenvolupar sistemes de predicció més precisos. A tall de resum, en el primer treball, i tenint en compte que s’havia de conèixer en profunditat l’estat de la qüestió en relació a la predicció del consum elèctric, es va fer una anàlisi completa de l’estat de l’art. Un cop fet això, i partint del coneixement adquirit, en el segon treball es va dur a terme la instal•lació de les xarxes de sensors, la recollida de dades de consum i el modelatge amb models lineals d’auto-regressió (AR). En el tercer treball, un cop fets els models es va anar un pas més enllà recollint dades d’ocupació, de meteorologia i ambient interior, provant diferents models paradigmàtics com Multiple Linear Regression (MLR), Artificial Neural Network (ANN) i Support Vector Regression (SVR) i establint quines dades exògenes milloren la predicció dels models. Arribat a aquest punt, i havent corroborat que l’ús de dades d’ocupació millora la predicció, es van generar tècniques per tal de disposar de les dades d’ocupació per endavant, o sigui a hores vista. D’aquesta manera es van dissenyar diferents atributs d’ocupació artificials, permetent-nos fer prediccions horàries de consum a llarg termini. Aquests conceptes s’expliquen en profunditat al quart treball.
Stewart, Jeremy M. (Jeremy Matthew). "Developing a low-cost, systematic approach to increase an existing data center's Energy Efficiency". Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/59178.
Texto completoCataloged from PDF version of thesis.
Includes bibliographical references (p. 87-91).
Data centers consume approximately 1.5% of total US electricity and 0.8% of the total world electricity, and this percentage will increase with the integration of technology into daily lives. In typical data centers, valued added IT equipment such as memory, servers, and networking account for less than one half of the electricity consumed, while support equipment consumes the remaining electricity. The purpose of this thesis is to present the results of developing, testing, and implementing a low-cost, systematic approach for increasing the energy efficiency of data centers. The pilot process was developed using industry best practices, and was piloted at a Raytheon site in Garland, TX. Because the approach is low-cost, there is an emphasis on increasing the energy efficiency of data centers' heat removal and lighting equipment. The result of implementing the low-cost systematic approach, consisting of both technical and behavior modifications, was a 23% reduction in electricity consumption, leading to annual savings of over $53,000. The improvement to the heat removal equipment's energy efficiency was 54%. In addition to presenting the results of the pilot, recommendations for replicating the pilot's success are provided. Two major managerial techniques are described - creating an aligned incentive structure in both Facilities and IT departments during the data center design phase, and empowering employees to make improvements during the use phase. Finally, a recommended roll out plan, which included a structure for Data Center Energy Efficiency Rapid Results Teams, is provided.
by Jeremy M. Stewart.
S.M.
M.B.A.
Berntsson, Simon y Mattias Andreasson. "Efficient Route-based Optimal Energy Management for Hybrid Electric Vehicles". Thesis, Linköpings universitet, Fordonssystem, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-148565.
Texto completoМартиненко, М. М. "Розробка типового електронного пакету нормативного забезпечення системи енергетичного менеджменту. Елементи системи менеджменту". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/75807.
Texto completoКвалификационная работа магистра составляет 87 страницы, в том числе 29 рисунков, одна таблица, библиографии из 45 источников на пяти страницах, одного приложения на 4 страницах. Цель исследования. Повышение энергоэффективности и конкурентоспособности предприятий Сумского региона на основе внедрения систем энергетического менеджмента путем разработки типового электронного пакет нормативного обеспечения, отвечающего принципам и требованиям ДСТУ ISO 50001: 2014. Для достижения поставленной цели были установлены следующие задачи: 1) исследовать опыт стран ЕС по повышению энергоэффективности экономик стран-членов; 2) исследовать требования международных стандартов систем управления энергоэффективностью и оценки энергетических услуг для потребителей; 3) разработать типовой электронный пакет нормативного обеспечения системы энергетического менеджмента, чтобы отвечал требованиям ДСТУ ISO 50001: 2014. Научная новизна полученных результатов. Впервые предложена на основе применения программного среде Microsoft Excel принципы разработки типового электронного пакета нормативного обеспечения по разработке и внедрению системы энергетического управления, который полностью соответствует принципам и требованиям ДСТУ ISO 50001: 2014 и позволяет управлять документацией системы менеджмента в электронном виде. Практическое значение полученных результатов. В работе предложен типовой электронный пакет нормативного обеспечения разработки и внедрения система энергетического управления, который полностью соответствует принципам и требованиям ДСТУ ISO 50001: 2014.
The master's qualification is 87 pages, including 29 drawings, one table, bibliographies from 45 sources on five pages, one application on 4 pages. The aim of the study. Improvement of energy efficiency and competitiveness of Sumy region enterprises based on the implementation of energy management systems by developing a standard electronic regulatory package that meets the principles and requirements of DSTU ISO 50001: 2014. To achieve this goal, the following research objectives have been set: 1) to examine the experience of EU countries in improving the energy efficiency of Member States' economies; 2) explore the requirements of international standards for energy efficiency management systems and the evaluation of energy services for consumers; 3) develop a standard electronic package of regulatory support for the energy management system that would meet the requirements of DSTU ISO 50001: 2014. Scientific novelty of the obtained results. For the first time, based on the application of the Microsoft Excel software environment, the principles of developing a standard electronic regulatory package for the development and implementation of an energy management system that fully complies with the principles and requirements of DSTU ISO 50001: 2014 and allows you to manage the documentation of the management system in electronic form. The practical significance of the results obtained. The paper proposes a standard electronic package of regulatory support for the development and implementation of an energy management system that fully complies with the principles and requirements of DSTU ISO 50001: 2014.
Sala, Cardoso Enric. "Advanced energy management strategies for HVAC systems in smart buildings". Doctoral thesis, Universitat Politècnica de Catalunya, 2019. http://hdl.handle.net/10803/668528.
Texto completoL’eficàcia dels sistemes de gestió d’energia per afrontar el consum d’energia en edificis és un tema que ha rebut un interès en augment durant els darrers anys a causa de la creixent demanda global d’energia i del gran percentatge d’energia que n’utilitzen actualment els edificis. L’escala d’aquest sector ha atret l'atenció de nombrosa investigació amb l’objectiu de descobrir possibles vies de millora i materialitzar-les amb l’ajuda de recents avenços tecnològics que es podrien aprofitar per disminuir les necessitats energètiques dels edificis. Concretament, en l’àrea d’instal·lacions de calefacció, ventilació i climatització, la disponibilitat de grans bases de dades històriques als sistemes de gestió d’edificis fa possible l’estudi de com d'eficients són realment aquests sistemes quan s’encarreguen d'assegurar el confort dels seus ocupants. En realitat, informes recents indiquen que hi ha una diferència entre el rendiment operatiu ideal i el rendiment generalment assolit a la pràctica. En conseqüència, aquesta tesi considera la investigació de noves estratègies de gestió de l’energia per a instal·lacions de calefacció, ventilació i climatització en edificis, destinades a reduir la diferència de rendiment mitjançant l’ús de mètodes basats en dades per tal d'augmentar el seu coneixement contextual, permetent als sistemes de gestió dirigir l’operació cap a zones de treball amb un rendiment superior. Això inclou tant l’avanç de metodologies de modelat capaces d’extreure coneixement de bases de dades de comportaments històrics d’edificis a través de la previsió de càrregues de consum i l’estimació del rendiment operatiu dels equips que recolzin la identificació del context operatiu i de les necessitats energètiques d’un edifici, tant com del desenvolupament d’una estratègia d’optimització multi-objectiu generalitzable per tal de minimitzar el consum d’energia mentre es satisfan aquestes necessitats energètiques. Els resultats experimentals obtinguts a partir de la implementació de les metodologies desenvolupades mostren un potencial important per augmentar l'eficiència energètica dels sistemes de climatització, mentre que són prou genèrics com per permetre el seu ús en diferents instal·lacions i suportant equips diversos. En conclusió, durant aquesta tesi es va desenvolupar, implementar i validar un marc d’anàlisi i actuació complet mitjançant una base de dades experimental adquirida en una planta pilot durant el període d’investigació de la tesi. Els resultats obtinguts demostren l’eficàcia de les contribucions de manera individual i, en conjunt, representen una solució idònia per ajudar a augmentar el rendiment de les instal·lacions de climatització sense afectar el confort dels seus ocupants
Estaña, Garcia Guillermo y Julian Iñigo Ruiz. "Feasibility of converting a Science Park in a cold climate into an “off-grid” facility using renewable energies and seasonal storage systems". Thesis, Högskolan i Gävle, Avdelningen för byggnadsteknik, energisystem och miljövetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-30417.
Texto completoDu, Plessis Gideon Edgar. "A variable water flow strategy for energy savings in large cooling systems / Gideon Edgar du Plessis". Thesis, North-West University, 2013. http://hdl.handle.net/10394/9509.
Texto completoThesis (PhD (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2013
Katchasuwanmanee, Kanet. "Investigation of the energy efficient sustainable manufacturing approach and its implementation perspectives". Thesis, Brunel University, 2016. http://bura.brunel.ac.uk/handle/2438/14348.
Texto completoDas, Barun Kumar. "Optimisation of stand-alone hybrid energy systems for power and thermal loads". Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2018. https://ro.ecu.edu.au/theses/2150.
Texto completoGómez, Blanco Paula Andrea. "Improvement of the Energy Efficiency and GHG Emissions Management Systems of an O&G Company's E&P Operated Assets". Thesis, KTH, Tillämpad termodynamik och kylteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-129176.
Texto completoReichenwallner, Christopher y Daniel Wasborg. "Control of a Hydraulic Hybrid System for Wheel Loaders". Thesis, Linköpings universitet, Fluida och mekatroniska system, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-158902.
Texto completoMämmelä, O. (Olli). "Algorithms for efficient and energy-aware network resource management in autonomous communications systems". Doctoral thesis, Oulun yliopisto, 2017. http://urn.fi/urn:isbn:9789526216089.
Texto completoTiivistelmä Langattoman tietoliikenteen nopean kasvun ennustetaan jatkuvan edelleen lähivuosinakin ja alan teollisuuden arvioiden mukaan matkapuhelinliikenteen määrä ylittäisi globaalisti 30,6 eksatavua vuoteen 2020 mennessä. Tämä tarkoittaisi liikennemäärän kahdeksankertaistumista ajanjaksolla 2015–2020. Älypuhelimet tuottavat suurimman osan matkapuhelinliikenteestä, ja älypuhelimien lukumäärän arvioidaan jatkavan kasvuaan vuoteen 2020 saakka, mikä johtaa nopeaan liikenteen kasvuun. Tämän lisäksi arvioidaan, että 5G verkot ja esineiden Internet tuottavat suuren määrän verkkoliikennettä. Matkapuhelinliikenteen ja laitteiden määrän kasvu tuo haasteita verkko-operaattoreille, palvelun tarjoajille, ja datakeskusoperaattoreille. Mikäli verkossa ei ole tarpeeksi siirtokapasiteettia dataliikenteen määrää varten, verkko ruuhkautuu ja lopulta palvelukokemus kärsii. Matkapuhelinverkot tulevat myös tulevaisuudessa tarvitsemaan datakeskusten laskentakapasiteettia. Datakeskusten energiankulutus on kuitenkin kasvanut viime vuosina, mikä on ongelma datakeskusoperaattoreille. Perinteinen strategia ongelmien ratkaisemiseksi on lisätä resurssien määrää tai tarjota tehokkaampaa laitteistoa. Resurssien liiallinen lisääminen kasvattaa kuitenkin sekä käyttö- että pääomakustannuksia ilman takuuta siitä, että keskimääräinen myyntitulo per käyttäjä kasvaisi. Tämän lisäksi tietoliikennejärjestelmät ovat monimutkaisia ja dynaamisia järjestelmiä, minkä vuoksi tehokas resurssienhallinta on haastavaa. Tämän vuoksi tarvitaan älykkäitä ja kestäviä metodeja, jotka pystyvät käyttämään olemassa olevia resursseja tehokkaasti tekemällä autonomisia päätöksiä ilman ylläpitäjän väliintuloa. Tämän tutkimuksen tavoitteena on toteuttaa, kehittää, mallintaa, ja testata algoritmeja, jotka mahdollistavat tehokkaan ja energiatietoisen verkkoresurssien hallinnan autonomisissa tietoliikennejärjestelmissä. Tutkimus esittää aluksi supertietokonedatakeskuksiin energiatietoisen algoritmin, jonka avulla voidaan vähentää energiankulutusta yhden datakeskuksen sisällä sekä usean eri datakeskuksen välillä. Verkkoyhteyden valintaan heterogeenisissä langattomissa verkoissa esitetään kaksi algoritmia. Ensimmäinen on käyttäjäkohtainen algoritmi, joka pyrkii optimoimaan yksittäisen käyttäjän palvelukokemusta. Toinen on verkon puolen algoritmi, joka keskittyy optimoimaan verkon kokonaisresurssien käyttöä. Lopuksi esitetään videopalvelulle algoritmi, joka parantaa videosisällön jakoa kontrolloidusti ja resurssitehokkaasti ilman että matkapuhelinverkon infrastruktuurille tarvitaan muutoksia
Reidl, Tim, Jürgen Weber y Steffen Ihlenfeldt. "Investigation of energy management topologies for forming presses with electro hydrostatic drivetrains". Technische Universität Dresden, 2020. https://tud.qucosa.de/id/qucosa%3A71190.
Texto completo