Siga este enlace para ver otros tipos de publicaciones sobre el tema: Dynamics of optimization.
Tesis sobre el tema "Dynamics of optimization"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte los 50 mejores tesis para su investigación sobre el tema "Dynamics of optimization".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Explore tesis sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.
1
Marsden, Christopher J. "Nonlinear dynamics of pattern recognition and optimization". Thesis, Loughborough University, 2012. https://dspace.lboro.ac.uk/2134/10694.
Texto completoResumen
We associate learning in living systems with the shaping of the velocity vector field of a dynamical system in response to external, generally random, stimuli. We consider various approaches to implement a system that is able to adapt the whole vector field, rather than just parts of it - a drawback of the most common current learning systems: artificial neural networks. This leads us to propose the mathematical concept of self-shaping dynamical systems. To begin, there is an empty phase space with no attractors, and thus a zero velocity vector field. Upon receiving the random stimulus, the vector field deforms and eventually becomes smooth and deterministic, despite the random nature of the applied force, while the phase space develops various geometrical objects. We consider the simplest of these - gradient self-shaping systems, whose vector field is the gradient of some energy function, which under certain conditions develops into the multi-dimensional probability density distribution of the input. We explain how self-shaping systems are relevant to artificial neural networks. Firstly, we show that they can potentially perform pattern recognition tasks typically implemented by Hopfield neural networks, but without any supervision and on-line, and without developing spurious minima in the phase space. Secondly, they can reconstruct the probability density distribution of input signals, like probabilistic neural networks, but without the need for new training patterns to have to enter the network as new hardware units. We therefore regard self-shaping systems as a generalisation of the neural network concept, achieved by abandoning the "rigid units - flexible couplings'' paradigm and making the vector field fully flexible and amenable to external force. It is not clear how such systems could be implemented in hardware, and so this new concept presents an engineering challenge. It could also become an alternative paradigm for the modelling of both living and learning systems. Mathematically it is interesting to find how a self shaping system could develop non-trivial objects in the phase space such as periodic orbits or chaotic attractors. We investigate how a delayed vector field could form such objects. We show that this method produces chaos in a class systems which have very simple dynamics in the non-delayed case. We also demonstrate the coexistence of bounded and unbounded solutions dependent on the initial conditions and the value of the delay. Finally, we speculate about how such a method could be used in global optimization.
2
Zhu, Yitao. "Sensitivity Analysis and Optimization of Multibody Systems". Diss., Virginia Tech, 2015. http://hdl.handle.net/10919/71649.
Texto completoResumen
Multibody dynamics simulations are currently widely accepted as valuable means for dynamic performance analysis of mechanical systems. The evolution of theoretical and computational aspects of the multibody dynamics discipline make it conducive these days for other types of applications, in addition to pure simulations. One very important such application is design optimization for multibody systems. Sensitivity analysis of multibody system dynamics, which is performed before optimization or in parallel, is essential for optimization.
Current sensitivity approaches have limitations in terms of efficiently performing sensitivity analysis for complex systems with respect to multiple design parameters. Thus, we bring new contributions to the state-of-the-art in analytical sensitivity approaches in this study. A direct differentiation method is developed for multibody dynamic models that employ Maggi's formulation. An adjoint variable method is developed for explicit and implicit first order Maggi's formulations, second order Maggi's formulation, and first and second order penalty formulations. The resulting sensitivities are employed to perform optimization of different multibody systems case studies. The collection of benchmark problems includes a five-bar mechanism, a full vehicle model, and a passive dynamic robot. The five-bar mechanism is used to test and validate the sensitivity approaches derived in this paper by comparing them with other sensitivity approaches. The full vehicle system is used to demonstrate the capability of the adjoint variable method based on the penalty formulation to perform sensitivity analysis and optimization for large and complex multibody systems with respect to multiple design parameters with high efficiency.
In addition, a new multibody dynamics software library MBSVT (Multibody Systems at Virginia Tech) is developed in Fortran 2003, with forward kinematics and dynamics, sensitivity analysis, and optimization capabilities. Several different contact and friction models, which can be used to model point contact and surface contact, are developed and included in MBSVT.
Finally, this study employs reference point coordinates and the penalty formulation to perform dynamic analysis for the passive dynamic robot, simplifying the modeling stage and making the robotic system more stable. The passive dynamic robot is also used to test and validate all the point contact and surface contact models developed in MBSVT.Ph. D.
3
Lei, Zhen. "Isogeometric shell analysis and optimization for structural dynamics". Thesis, Ecully, Ecole centrale de Lyon, 2015. http://www.theses.fr/2015ECDL0028/document.
Texto completoResumen
Cette thèse présente des travaux effectués dans le cadre de l'optimisation de forme de pièces mécaniques, sous critère dynamique, par approche isogéométrique. Pour réaliser une telle optimisation nous mettons en place dans un premier temps les éléments coque au travers des formulations Kirchhoff-Love puis Reissner-Minlin. Nous présentons une méthode permettant d'atteindre les vecteurs normaux aux fibres dans ces formulations au travers de l'utilisation d'une grille mixte de fonctions de base interpolantes, traditionnellement utilisées en éléments finis, et de fonction non interpolantes issues de la description isogéométrique des coques. Par la suite, nous détaillons une méthode pour le couplage de patch puis nous mettons en place la méthode de synthèse modale classique dans le cadre de structures en dynamique décrites par des éléments isogéometriques. Ce travail établit une base pour l'optimisation de forme sous critères dynamique de telles structures. Enfin, nous développons une méthode d'optimisation de forme basée sur le calcul du gradient de la fonction objectif envisagée. La sensibilité de conception est extraite de l'analyse de sensibilité au niveau même du maillage du modèle, qui est obtenue par l'analyse discrète de sensibilité. Des exemples d'application permettent de montrer la pertinence et l'exactitude des approches proposéesIsogeometric method is a promising method in bridging the gap between the computer aided design and computer aided analysis. No information is lost when transferring the design model to the analysis model. It is a great advantage over the traditional finite element method, where the analysis model is only an approximation of the design model. It is advantageous for structural optimization, the optimal structure obtained will be a design model. In this thesis, the research is focused on the fast three dimensional free shape optimization with isogeometric shell elements. The related research, the development of isogeometric shell elements, the patch coupling in isogeometric analysis, the modal synthesis with isogeometric elements are also studied. We proposed a series of mixed grid Reissner-Minlin shell formulations. It adopts both the interpolatory basis functions, which are from the traditional FEM, and the non-interpolatory basis functions, which are from IGA, to approximate the unknown elds. It gives a natural way to define the fiber vectors in IGA Reissner-Mindlin shell formulations, where the non-interpolatory nature of IGA basis functions causes complexity. It is also advantageous for applying the rotational boundary conditions. A modified reduce quadrature scheme was also proposed to improve the quadrature eficiency, at the same time, relieve the locking in the shell formulations. We gave a method for patch coupling in isogeometric analysis. It is used to connect the adjacent patches. The classical modal synthesis method, the fixed interface Craig-Bampton method, is also used as well as the isogeometric Kirchhoff-Love shell elements. The key problem is also the connection between adjacent patches. The modal synthesis method can largely reduce the time costs in analysis concerning structural dynamics. This part of work lays a foundation for the fast shape optimization of built-up structures, where the design variables are only relevant to certain substructures. We developed a fast shape optimization framework for three dimensional thin wall structure design. The thin wall structure is modelled with isogeometric Kirchhoff-Love shell elements. The analytical sensitivity analysis is the key focus, since the gradient base optimization is normally more fast. There are two models in most optimization problem, the design model and the analysis model. The design variables are defined in the design model, however the analytical sensitivity is normally obtained from the analysis model. Although it is possible to use the same model in analysis and design under isogeomeric framework, it might give either a highly distorted optimum structure or a unreliable structural response. We developed a sensitivity mapping scheme to resolve this problem. The design sensitivity is extracted from the analysis model mesh level sensitivity, which is obtained by the discrete analytical sensitivity analysis. It provides exibility for the design variable definition. The correctness of structure response is also ensured. The modal synthesis method is also used to further improve the optimization eficiency for the built-up structure optimization concerning structural dynamics criteria
4
Lundvall, Johan. "Data Assimilation in Fluid Dynamics using Adjoint Optimization". Doctoral thesis, Linköping : Matematiska institutionen, Linköpings universitet, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-9684.
Texto completo
5
ROUSSEAU, Yannick, Igor MEN'SHOV y Yoshiaki NAKAMURA. "Morphing-Based Shape Optimization in Computational Fluid Dynamics". 日本航空宇宙学会, 2007. http://hdl.handle.net/2237/13876.
Texto completo
6
Munro, Bruce C. "Airplane trajectory expansion for dynamics inversion". Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-07102009-040551/.
Texto completo
7
Wu, Kailiang. "Modeling the semiconductor industry dynamics". Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/45280.
Texto completoResumen
Thesis (S.M.)--Massachusetts Institute of Technology, Computation for Design and Optimization Program, 2008.Includes bibliographical references (p. 89-92).
The semiconductor industry is an exciting and challenging industry. Strong demand at the application end, plus the high capital intensity and rapid technological innovation in manufacturing, makes it difficult to manage supply chain planning and investment in technology transitions. Better understanding the essence of the industry dynamics will help firms win competitive advantages in this turbulent market. In this thesis, we will study semiconductor industry dynamics from three different angles: quantitative modeling, industry dynamics simulation, and strategic analysis. First, we develop a stochastic linear optimization model to address the supplier's "order fulfillment dilemma" suggested by previous empirical studies. The model provides optimal equipment production decisions that minimize the total cost under stochastic demand. To solve the large scale problem, we introduce the Bender's Decomposition, which is proven to outperform the pure Simplex method. Furthermore, we extend the basic model to multiple periods, allowing equipment inventory planning over a period of time. Second, we build a macro-level industry dynamic model using the methodology of System Dynamics. The model includes components of electronics demand projection, fabrication capacity allocation, fabrication cost structure, technology roadmapping as well as equipment production and R&D. The model generates projections of demand , industry productivity, schedule of building new fabrication, adoption of the latest process technology, etc., which are validated by actual industry data. In addition, we devise a control panel in the software that enables the users to implement flexible scenario and sensitivity analysis. Third, we propose a strategic framework for companies to pinpoint the root causes of the supply-demand mismatch problem.
(cont.) This framework considers long lead times, fast clockspeeds, Moore's Law, and risky product and technology, which transitions contribute to the pronounced volatility amplification occurring in the semiconductor industry. This framework, along with several industry successful practices, will assist companies to mitigate the demand volatility and improve their supply chain performance.
by Kailiang Wu.
S.M.
8
Williams, Nathan A. "Drag optimization of light trucks using computational fluid dynamics". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03sep%5FWilliams%5FNathan.pdf.
Texto completoResumen
Thesis (M.S. in Mechanical Engineering and M.S. in Information Technology Management)--Naval Postgraduate School, September 2003.Thesis advisor(s): Joshua H. Gordis, Dan Boger. Includes bibliographical references (p. 157-158). Also available online.
9
Kwok, Terence 1973. "Neural networks with nonlinear system dynamics for combinatorial optimization". Monash University, School of Business Systems, 2001. http://arrow.monash.edu.au/hdl/1959.1/8928.
Texto completo
10
Fahrenkopf, Max A. "Optimization, Dynamics and Stability of Non-Linear Separation Processes". Research Showcase @ CMU, 2014. http://repository.cmu.edu/dissertations/390.
Texto completoResumen
In this thesis we develop a non convex non-linear programming problem that determines the minimum run time of a rapid, gel-free DNA separation technique called micelle end-labeled free solution electrophoresis (ELFSE). Micelle ELFSE is typically performed in capillary electrophoresis where the capillary length, electric field strength, and micelle drag tag size are the primary tuning variables. Using optimization, we demonstrate that capillary electrophoresis can be used to separate up to 600 bases in under 50 minutes. A significant improvement in performance is then shown to be achievable by using parallel capillaries which can separate up to 600 bases in under 5 minutes. Even more improvement is shown to be possible by using alternative separation modes, such as using an EOF counter- ow which enables 600 bases to be separated in under 4.5 minutes using a single capillary, and microfluidics utilizing snapshot detection to yield 600 bases in under 3.5 minutes. Long DNA, above 5000 bases, is particularly challenging to separate quickly. Using Brownian dynamics simulations we show the viability of integrating two DNA separation techniques: end-labeled DNA electrophoresis and entropic trapping. We present simulation results that demonstrate improved performance of the integrated device over entropic trapping alone. Brownian dynamics simulations are very computationally expensive, often taking over 24 hours per data point. We present an acceleration technique called projective integration which may be useful for simulations with a large amount of integration steps. We show that, using a model built from linear regression, periodic extrapolations can be used to decrease computational time. Finally we present the stability of the multi-component distillation column. We demonstrate, through the use of thermodynamics, that the distillation column is asymptotically stable when using pressure, temperature, and level control on the reboiler and condenser.
11
Abraham, Yonas Beyene. "Optimization with surrogates for electronic-structure calculations /". Electronic thesis, 2004. http://etd.wfu.edu/theses/available/etd-05102004-012537/.
Texto completo
12
Stelzer, Maximilian. "Forward dynamics simulation and optimization of walking robots and humans /". Düsseldorf : VDI-Verl, 2007. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=016358195&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Texto completo
13
Gupta, Rikin. "Incorporating Flight Dynamics and Control Criteria in Aircraft Design Optimization". Diss., Virginia Tech, 2020. http://hdl.handle.net/10919/104967.
Texto completoResumen
The NASA Performance Adaptive Aeroelastic Wing (PAAW) project goals include significant reductions in fuel burn, emissions, and noise via efficient aeroelastic design and improvements in propulsion systems. As modern transport airplane designs become increasingly lightweight and incorporate high aspect-ratio wings, aeroservoelastic effects gain prominence in modeling and design considerations. As a result, the influence of the flight dynamics and controls on the optimal structural and aerodynamic design needs to be captured in the design process. There is an increasing interest in more integrated aircraft multidisciplinary design optimization (MDAO) processes that can bring flight control design into the early stage of an aircraft design cycle. So, in this thesis different flight dynamics modeling methodologies are presented that can be integrated within the MDAO framework. MDAO studies are conducted to maximize the controllability and observability of a UAV type aircraft using curvilinear SpaRibs and straight spars and ribs as the internal structural layout. The impulse residues and controllability Gramians are used as surrogates for the control objectives in the MDAO to maximize the controllability and observability of the aircraft. The optimal control designs are compared with those obtained using weight minimization as the design objective. It is found that using the aforementioned control objectives, the resulting aircraft design is more controllable and can be used to expand the flight envelope by up to 50% as compared to the weight minimized design.Doctor of Philosophy
Over the last two decades, several attempts have been made towards multidisciplinary design analysis and optimization (MDAO) of flexible wings by integrating flight control laws in the wing design so that the aircraft will have sufficient control authority across different flying conditions. However, most of the studies have been restricted to the wing design only using a predefined control architecture approach, which would be very difficult to implement at the conceptual design stage. There is a need for an approach that would be faster and more practical. Including control surface and control law designs at the conceptual design stage is becoming increasingly important, due to the complexity of both the aircraft control laws and that of the actuation and sensing, and the enhanced wing flexibility of future transport aircraft. A key question that arises is, can one design an aircraft that is more controllable and observable? So, in this thesis, a more fundamental approach, in which the internal structural layout of the aircraft is optimized to design an aircraft that is more controllable, is presented and implemented. The approach uses the fundamentals of linear systems theory for maximizing the controllability and observability of the aircraft using an MDAO framework.
14
Wu, Yi. "Topology optimization in structural dynamics : vibrations, fracture resistance and uncertainties". Thesis, Paris Est, 2022. http://www.theses.fr/2022PESC2007.
Texto completoResumen
L'objectif de cette thèse est de développer des méthodes d'optimisation topologiques basées sur la densité pour plusieurs problèmes difficiles de structure en dynamique. Premièrement, nous proposons une stratégie de normalisation en élasto-dynamique en vue d'obtenir une distribution optimale de matériau dans la structure qui réduit la réponse aux excitations dynamiques en fréquence et améliore la stabilité numérique dans la méthode BESO (bi-directional evolutionary structural optimisation). Ensuite, pour décrire les incertitudes de paramètres pouvant intervenir dans des problèmes réalistes en ingénierie, un modèle d'incertitudes à intervalle hybride est développé pour prendre en compte les incertitudes dans le problème d'optimisation en dynamique. Une méthode de perturbation est développée pour une optimisation topologique robuste vis-à-vis des incertitudes et permettant des gains de temps de calculs importants. De plus, nous introduisons un modèle d'incertitude de champ d'intervalle dans ce cadre. L'approche est appliquée à l'optimisation topologique des structures mono-matériaux, composites et multi-échelles. Enfin, nous développons un cadre d'optimisation topologique pour la résistance des structures à la fissuration quasi-fragile dans un cadre dynamique, par combinaison avec la méthode de champs de phase. Ce cadre est étendu à la conception de structures résistantes à des impacts. Contrairement aux approches basées sur les contraintes, la totalité de la propagation des fissures est prise en compte dans le processus d'optimisationThe objective of this thesis is to develop density based-topology optimization methods for several challenging dynamic structural problems. First, we propose a normalization strategy for elastodynamics to obtain optimized material distributions of the structures that reduces frequency response and improves the numerical stabilities of the bi-directional evolutionary structural optimization (BESO). Then, to take into account uncertainties in practical engineering problems, a hybrid interval uncertainty model is employed to efficiently model uncertainties in dynamic structural optimization. A perturbation method is developed to implement an uncertainty-insensitive robust dynamic topology optimization in a form that greatly reduces the computational costs. In addition, we introduce a model of interval field uncertainty into dynamic topology optimization. The approach is applied to single material, composites and multi-scale structures topology optimization. Finally, we develop a topology optimization for dynamic brittle fracture structural resistance, by combining topology optimization with dynamic phase field fracture simulations. This framework is extended to design impact-resistant structures. In contrast to stress-based approaches, the whole crack propagation is taken into account into the optimization process
15
Morris, Bradford Shepherd J. E. Shepherd J. E. "Charge-exchange collision dynamics and ion engine grid geometry optimization /". Diss., Pasadena, Calif. : California Institute of Technology, 2007. http://resolver.caltech.edu/CaltechETD:etd-02282007-154751.
Texto completo
16
Sorrentino, Luigi. "Simulation and optimization of crowd dynamics using a multiscale model". Doctoral thesis, Universita degli studi di Salerno, 2012. http://hdl.handle.net/10556/318.
Texto completoResumen
2010 - 2011In the last decades, the modeling of crowd motion and pedestrian .ow has attracted the attention of applied mathematicians, because of an increasing num- ber of applications, in engineering and social sciences, dealing with this or similar complex systems, for design and optimization purposes. The crowd has caused many disasters, in the stadiums during some major sporting events as the "Hillsborough disaster" occurred on 15 April 1989 at Hills- borough, a football stadium, in She¢ eld, England, resulting in the deaths of 96 people, and 766 being injured that remains the deadliest stadium-related disaster in British history and one of the worst ever international football accidents. Other example is the "Heysel Stadium disaster" occurred on 29 May 1985 when escaping, fans were pressed against a wall in the Heysel Stadium in Brussels, Belgium, as a result of rioting before the start of the 1985 European Cup Final between Liv- erpool of England and Juventus of Italy. Thirty-nine Juventus fans died and 600 were injured. It is well know the case of the London Millennium Footbridge, that was closed the very day of its opening due to macroscopic lateral oscillations of the structure developing while pedestrians crossed the bridge. This phenomenon renewed the interest toward the investigation of these issues by means of mathe- matical modeling techniques. Other examples are emergency situations in crowded areas as airports or railway stations. In some cases, as the pedestrian disaster in Jamarat Bridge located in South Arabia, mathematical modeling and numerical simulation have already been successfully employed to study the dynamics of the .ow of pilgrims, so as to highlight critical circumstances under which crowd ac- cidents tend to occur and suggest counter-measures to improve the safety of the event. In the existing literature on mathematical modeling of human crowds we can distinguish two approaches: microscopic and macroscopic models. In model at microscopic scale pedestrians are described individually in their motion by ordinary di¤erential equations and problems are usually set in two-dimensional domains delimiting the walking area under consideration, with the presence of obstacles within the domain and a target. The basic modeling framework relies on classical Newtonian laws of point. The model at the macroscopic scale consists in using partial di¤erential equations, that is in describing the evolution in time and space of pedestrians supplemented by either suitable closure relations linking the velocity of the latter to their density or analogous balance law for the momentum. Again, typical guidelines in devising this kind of models are the concepts of preferred direction of motion and discomfort at high densities. In the framework of scalar conservation laws, a macroscopic onedimensional model has been proposed by Colombo and Rosini, resorting to some common ideas to vehicular tra¢ c modeling, with the speci.c aim of describing the transition from normal to panic conditions. Piccoli and Tosin propose to adopt a di¤erent macroscopic point of view, based on a measure-theoretical framework which has recently been introduced by Canuto et al. for coordination problems (rendez-vous) of multiagent systems. This approach consists in a discrete-time Eulerian macroscopic representation of the system via a family of measures which, pushed forward by some motion mappings, provide an estimate of the space occupancy by pedestrians at successive time steps. From the modeling point of view, this setting is particularly suitable to treat nonlocal interactions among pedestrians, obstacles, and wall boundary conditions. A microscopic approach is advantageous when one wants to model di¤erences among the individuals, random disturbances, or small environments. Moreover, it is the only reliable approach when one wants to track exactly the position of a few walkers. On the other hand, it may not be convenient to use a microscopic approach to model pedestrian .ow in large environments, due to the high com- putational e¤ort required. A macroscopic approach may be preferable to address optimization problems and analytical issues, as well as to handle experimental data. Nonetheless, despite the fact that self-organization phenomena are often visible only in large crowds, they are a consequence of strategical behaviors devel- oped by individual pedestrians. The two scales may reproduce the same features of the group behavior, thus providing a perfect matching between the results of the simulations for the micro- scopic and the macroscopic model in some test cases. This motivated the multiscale approach proposed by Cristiani, Piccoli and Tosin. Such an approach allows one to keep a macroscopic view without losing the right amount of .granularity,.which is crucial for the emergence of some self-organized patterns. Furthermore, the method allows one to introduce in a macroscopic (averaged) context some micro- scopic e¤ects, such as random disturbances or di¤erences among the individuals, in a fully justi.able manner from both the physical and the mathematical perspec- tive. In the model, microscopic and macroscopic scales coexist and continuously share information on the overall dynamics. More precisely, the microscopic part tracks the trajectories of single pedestrians and the macroscopic part the density of pedestrians using the same evolution equation duly interpreted in the sense of measures. In this respect, the two scales are indivisible. Starting from model of Cristiani, Piccoli and Tosin we have implemented algo- rithms to simulate the pedestrians motion toward a target to reach in a bounded area, with one or more obstacles inside. In this work di¤erent scenarios have been analyzed in order to .nd the obstacle con.guration which minimizes the pedes- trian average exit time. The optimization is achieved using to algorithms. The .rst one is based on the exhaustive exploration of all positions: the average exit time for all scenarios is computed and then the best one is chosen. The second algorithm is of steepest descent type according to which the obstacle con.guration corresponding to the minimum exit time is found using an iterative method. A variant has been introduced to the algorithm so to obtain a more e¢ cient proce- dure. The latter allows to .nd better solutions in few steps than other algorithms. Finally we performed other simulations with bounded domains like a classical .at with .ve rooms and two exits, comparing the results of three di¤erent scenario changing the positions of exit doors. [edited by author]
X n.s.
17
Rampazzo, Franco. "Impulsive Control Systems : Dynamics, Optimization Problems, and Applications to Mechanics". Doctoral thesis, SISSA, 1989. http://hdl.handle.net/20.500.11767/4558.
Texto completo
18
Chandramoorthy, Nisha. "Molecular dynamics-based approaches for mesoscale lubrication". Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/107059.
Texto completoResumen
Thesis: S.M., Massachusetts Institute of Technology, Computation for Design and Optimization Program, 2016.Cataloged from PDF version of thesis.
Includes bibliographical references (pages 101-109).
Classical lubrication theory is unable to describe nanoscale flows due to the failure of two of its constitutive components: a) the Newtonian stress-strain rate relationship and b) the no-slip boundary condition. In this thesis, we present a methodology for deriving a modified Reynolds equation (referred to as the Molecular Dynamics-based Equation for Lubrication, or the MODEL) which overcomes these limitations by introducing a Molecular Dynamics-based constitutive relationship for the flow rate through the lubrication gap, that is valid beyond the range of validity of the Navier-Stokes constitutive models. We demonstrate the proposed methodology for the flow of a simple lubricant, n-hexadecane, between smooth Iron walls and show that the MODEL is able to predict flow rates with good accuracy even in nanochannels that are only a few atomic layers wide. The MODEL constitutive relationship for the flow rate used in this work is a slip-corrected Poiseuille model with the slip length and viscosity derived from Molecular Dynamics (MD) simulations of pressure-driven flow in nanochannels sufficiently large that the Navier-Stokes description is valid. Although more general expressions for the flow rate can certainly be used, for the lubricant-solid system modeled here, the slip-corrected Poiseuille flow was surprisingly found to be sufficient. We validate the MODEL by comparing MD results for the pressure distribution in a barrel-drop lubrication configuration with the analytical solution for the pressure obtained by solving the MODEL. The excellent agreement obtained between the dynamic pressure in the fluid measured from these MD simulations and the MODEL results suggests that it is possible to extend pde-based hydrodynamic modelling of lubrication problems even to nanoscale films beyond the validity of the Navier-Stokes description. In other words, once the flow rate constitutive relation is obtained, lubrication problems in nanoscale films can be solved without resorting to expensive particle methods like MD. We demonstrate that slip cannot be neglected in the boundary lubrication regime by considering various lubrication problems of practical interest. Using a simple barrel-drop lubrication model for the top two rings in an internal combustion engine, we show that for lubrication gaps with a minimum thickness that is ten times the size of the slip length, the normal force and the frictional force are overestimated by a factor of 1.5 when assuming no-slip. By modifying the Twin Land Oil Control Ring (TLOCR)-liner interface model to include slip, we find significant reduction in the hydrodynamic pressure and the friction when compared to the original model; the oil flow rate does not change appreciably. Finally, we chalk out a procedure for the inclusion of slip in the methodology for developing correlations for the pressure, friction and the flow rate in the TLOCR-liner system.
by Nisha Chandramoorthy.
S.M.
19
Chung, Hyun-Joon. "Optimization-based dynamic prediction of 3D human running". Diss., University of Iowa, 2009. https://ir.uiowa.edu/etd/348.
Texto completoResumen
Mathematical modeling of human running is a challenging problem from analytical and computational points of view. Purpose of the present research is to develop and study formulations and computational procedures for simulation of natural human running. The human skeletal structure is modeled as a mechanical system that includes link lengths, mass moments of inertia, joint torques, and external forces. The model has 55 degrees of freedom, 49 for revolute joints and 6 for global translation and rotation. Denavit-Hartenberg method is used for kinematics analysis and recursive Lagrangian formulation is used for the equations of motion. The dynamic stability is achieved by satisfying the zero moment point (ZMP) condition during the ground contact phase. B-spline interpolation is used for discretization of the joint angle profiles. The joint torque square, impulse at the foot strike, and yawing moment are included in the performance measure. A minimal set of constraints is imposed in the formulation of the problem to simulate natural running motion. Normal running with arm fixed, slow jog along curves, and running with upper body motion are formulated. Simulation results are obtained for various cases and discussed. The cases are running with different foot locations, running with backpack, and running with different running speeds. Also, extreme cases are performed. Each case gives reasonable cause and effect results. Furthermore, sparsity of the formulation is studied. The results obtained with the formulation are validated with the experimental data. The proposed formulation is robust and can predict natural motion of human running.
20
Yao, Yuwen. "Analysis of multi-branch torsional vibration for design optimization". Morgantown, W. Va. : [West Virginia University Libraries], 2004. https://etd.wvu.edu/etd/controller.jsp?moduleName=documentdata&jsp%5FetdId=19.
Texto completoResumen
Thesis (Ph. D.)--West Virginia University, 2004.Title from document title page. Document formatted into pages; contains viii, 180 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 123-128).
21
Ayten, Kagan Koray. "Optimum trajectory planning for redundant manipulators through inverse dynamics". Thesis, University of Bath, 2012. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.665377.
Texto completoResumen
The purpose of this thesis is to develop methods to generate minimum-energy consumption trajectories for a point-to-point motion under pre-defined kinematic and dynamic constraints for robotic manipulators. With respect to other trajectory optimization methods, the work presented in this thesis provides two new methods to the scientific literature. The proposed methods improve the handling of the constraints in trajectory optimization methods as well as reducing the computational complexity of redundant/hyper-redundant manipulator systems.
22
Deng, Yun. "Design optimization of a micro wind turbine using computational fluid dynamics". Click to view the E-thesis via HKUTO, 2008. http://sunzi.lib.hku.hk/hkuto/record/B4098770X.
Texto completo
23
Huynh, Due Quoc. "Optimization of coulombic semi-active automotive suspension systems". Thesis, Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/16072.
Texto completo
24
McGillivray, Nathan T. "Coupling Computational Fluid Dynamics Analysis and Optimization Techniques for Scramjet Engine Design". Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1536311445147862.
Texto completo
25
Deng, Yun y 鄧昀. "Design optimization of a micro wind turbine using computational fluid dynamics". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B4098770X.
Texto completo
26
Chrobok, Viktor. "Optimization of Harvesting Natural Resources". Doctoral thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-196942.
Texto completoResumen
The thesis describes various modifications of the predator-prey model. The modifications are considering several harvesting methods. At the beginning a solution and a sensitivity analysis of the basic model are provided. The first modification is the percentage harvesting model, which could be easily converted to the basic model. Secondly a constant harvesting including a linearization is derived. A significant part is devoted to regulation models with special a focus on environmental applications and the stability of the system. Optimization algorithms for one and both species harvesting are derived and back-tested. One species harvesting is based on econometrical tools; the core of two species harvesting is the modified Newton's method. The economic applications of the model in macroeconomics and oligopoly theory are expanded using the methods derived in the thesis.
27
Ramanata, Peeroon Pete. "Optimal Vehicle Path Generator Using Optimization Methods". Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36615.
Texto completoResumen
This research explores the idea of developing an optimal
path generator that can be used in conjunction with a
feedback steering controller to automate track testing
experiment. This study specifically concentrates on
applying optimization concepts to generate paths that
meet two separate objective functions; minimum time and
maximum tire forces.
A three-degree-of freedom vehicle model is used to approximate the handling dynamics of the vehicle. Inputs into the vehicle model are steering angle and longitudinal force at the tire. These two variables approximate two requirements that are essential in operating a vehicle. The Third order Runge-Kutta integration routine is used to integrate vehicle dynamics equations of motion. The Optimization Toolbox of Matlab is used to evaluate the optimization algorithm. The vehicle is constrained with a series of conditions, includes, a travel within the boundaries of the track, traction force limitations at the tire, vehicle speed, and steering.
The simulation results show that the optimization applied to vehicle dynamics can be useful in designing an automated track testing system. The optimal path generator can be used to develop meaningful test paths on existing test tracks. This study can be used to generate an accelerated tire wear test path, perform parametric study of suspension geometry design using vehicle dynamics handling test data, and to increase repeatability in generating track testing results.
Vita removed at author's request. GMc 3/13/2013
Master of Science
28
Aslam, Tehseen. "Analysis of manufacturing supply chains using system dynamics and multi-objective optimization". Doctoral thesis, Högskolan i Skövde, Institutionen för teknik och samhälle, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-8661.
Texto completoResumen
Supply chains are in general complex networks composed of autonomous entities whereby multiple performance measures in different levels, which in most cases are in conflict with each other, have to be taken into account. Hence, due to the multiple performance measures, supply chain decision making is much more complex than treating it as a single objective optimization problem. Thus, the aim of the doctoral thesis is to address the supply chain optimization problem within a truly Pareto-based multi-objective context and utilize knowledge extraction techniques to extract valuable and useful information from the Pareto optimal solutions. By knowledge extraction, it means to detect hidden interrelationships between the Pareto solutions, identify common properties and characteristics of the Pareto solutions as well as discover concealed structures in the Pareto optimal data set in order to support managers in their decision making. This aim is addressed through the SBO-framework where the simulation methodology is based on system dynamics (SD) and the optimization utilizes multi-objective optimization (MOO). In order to connect the SD and MOO software, this doctoral thesis introduced a novel SD and MOO interface application which allow the modeling and optimization applications to interact. Additionally, this thesis work also presents a novel SD-MOO methodology that addresses the issue of curse off dimensionality in MOO for higher dimensional problems and with the aim to execute supply chain SD-MOO in a computationally cost efficient way, in terms of convergence, solution intensification and accuracy of obtaining the Pareto-optimal front for complex supply chain problems. In order to detect evident and hidden structures, characteristics and properties of the Pareto-optimal solutions, this work utilizes Parallel Coordinates, Clustering and Innovization, which are three different types of tools for post-optimal analysis and facilitators of discovering and retrieving knowledge from the Pareto-optimal set. The developed SD-MOO interface and methodology are then verified and validated through two academic case studies and a real-world industrial application case study. While not all the insights generated in these application studies can be generalized for other supply-chain systems, the analysis results provide strong indications that the methodology and techniques introduced in this thesis are capable to generate knowledge to support academic SCM research and real-world SCM decision making, which to our knowledge cannot be performed by other methods.
29
Guo, Zhijiang. "Design and optimization of weighted orthogonal Gough-Stewart platforms with desired dynamics". Laramie, Wyo. : University of Wyoming, 2006. http://proquest.umi.com/pqdweb?did=1225139851&sid=1&Fmt=2&clientId=18949&RQT=309&VName=PQD.
Texto completo
30
Hariri, Mahdiar. "A study of optimization-based predictive dynamics method for digital human modeling". Diss., University of Iowa, 2012. https://ir.uiowa.edu/etd/2886.
Texto completoResumen
This study develops theorems which generalize or improve the existing predictive dynamics method and implements them to simulate several motion tasks of a human model. Specifically, the problem of determination of contact forces (non-adhesive) between the environment and the digital human model is addressed. Determination of accurate contact forces is used in the calculation of joint torques and is important to account for human strength limitations in simulation of various tasks. It is shown that calculation of the contact forces based on the distance of the contact areas from the Zero Moment Point (ZMP) leads to unrealistic values for some of the forces. This is the approach that has been used in the past. In this work, necessary and sufficient constraints for modeling the non-adhesiveness of a contact area are presented through the definition of NCM (Normal Contact Moment) concepts. NCM point, constraints and stability margins are the new theoretical concepts introduced. When there is only one contact area between the body and the environment, the ZMP and the NCM point coincide. In this case, the contact forces and moments are deterministic. When there are more than one contact areas, the contact forces and moments are indeterminate. In this case, an optimization problem is defined based on the NCM constraints where contact forces and moments are treated as the unknown design variables. Here, kinematics of the motion is assumed to be known. It is shown that this approach leads to more realistic values for the contact forces and moments for a human motion task as opposed to the ZMP based approach. The proposed approach appears to be quite promising and needs to be fully integrated into the predictive dynamics approach of human motion simulation. Some other insights are obtained for the predictive dynamics approach of human motion simulation. For example, it is mathematically proved and also validated that there is a need for an individual constraint to ensure that the normal component of the resultant global forces remains compressive for non-adhesive contacts between the body and the environment. Also, the ZMP constraints and stability margins are applicable for the problems where all the contacts between the environment and the body are in one plane; however, the NCM constraints and stability margins are applicable for all types of arbitrary contacts between the body and the environment. The ZMP and NCM methods are used to model the motion of a human (soldier) performing several military tasks: Aiming, Kneeling, Going Prone and Aiming in Prone Position. New collision avoidance theorems are also presented and used in these simulations.
31
Ratnarajah, Thanujan. "Modeling the dynamics of software competition to find appropriate openness and pricing strategy". Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/31166.
Texto completoResumen
Software firms can use open source development model combined with proprietary development model to increase their profitability. Open source development models can help software firms create products with better technical features at a lower price. Since open source development is a community based development method the popularity of the software among customers will also increase. Using open source development method with proprietary method will also require firms to sell the product at a lower price. This creates a challenge for the firms to find the optimal price and level of openness to maximize their profit.
Using the systems dynamics methodology, development, employment and customer choice for a typical software firm was captured in a simulation model to understand the dynamics of the software firm in a competitive market and to find the optimal level of openness and price. The model was built based on previous research literature, various software models and from the authorâ s understanding of the software industry.
Our analysis suggests that in a fast evolving market where customers spend less time researching and shopping for a software product (Antivirus market VS Operating Systems market), companies should maintain lower level of openness and higher proprietary type development to increase the Net Present Value of the organization. The software firm could benefit from a higher level of openness in a market where the customers base their purchasing decision on the popularity and compatibility of the software and strong network effects are present (e.g. Business intelligence software).Master of Science
32
Sareen, Ashish Kumar. "Rotorcraft airframe structural optimization for vibration and dynamic stress reduction including damping treatment". Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/12951.
Texto completo
33
Daily, Robert L. Jones Peter D. "Optimization of hull shapes for water-skiing and wakeboarding". Auburn, Ala., 2005. http://repo.lib.auburn.edu/2005%20Fall/Thesis/DAILY_ROBERT_13.pdf.
Texto completo
34
Wilson, James M. "Exploitation of Nonlinear Dynamics of Buckled Beams". Miami University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=miami1448374236.
Texto completo
35
Bhatia, Abhishek. "Multivariable Feedback Control of Unstable Aircraft Dynamics". University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1479809412341377.
Texto completo
36
Almahmoud, Omar H. M. "Design Optimization of Functionalized Silica-Polymer Nanocomposite through Finite Element and Molecular Dynamics Modeling". Thesis, University of North Texas, 2020. https://digital.library.unt.edu/ark:/67531/metadc1707245/.
Texto completoResumen
This dissertation focuses on studying membrane air dehumidification for a membrane moisture exchanger in a membrane heat pump system. The study has two parts: an optimization of membrane moisture exchanger for air dehumidification in the macroscale, and diffusion of water vapor in polymer nanocomposites membrane for humid air dehumidification in the nanoscale. In the first part of the research, the mass transport of water vapor molecules through hydrophilic silica nanochannel chains in hydrophobic polyurethane matrix was studied by simulations and experiments for different membrane moisture exchanger design configurations. The mass transport across the polymer nanocomposite membrane occurs with the diffusion of moist air water vapor molecules in the membrane moisture exchanger in a membrane heat pump air conditioning system for air dehumidification purposes. The hydrophobic polyurethane matrix containing the hydrophilic silica nanochannel chains membrane is responsible for transporting water vapor molecules from the feed side to the permeate side of the membrane without allowing air molecules to pass through.In the second part of the research, diffusion analysis of the polymer nanocomposite membrane were performed in the nanoscale for the polymer nanocomposite membrane. The diffusion phenomena through the polymer, the polymer nanocomposite without modifying the silica surfaces, and the polymer nanocomposite with two different silica modified surfaces were studied in order to obtain the highest water vapor removal through the membrane. Different membrane moisture exchanger configurations for optimal water vapor removal were compared to get the desired membrane moisture exchanger design using the finite element method (FEM) with the COMSOL Multiphysics software package. The prediction of mass transport through different membrane configurations can be done by obtaining the mass flux value for each configuration. An experimental setup of one membrane moisture exchanger design was introduced to verify the simulation results. Also, for different membrane structures, permeability was measured according to the ASTM E-96 method. The prediction of water vapor diffusion through the polymer nanocomposite was studied by molecular dynamics simulation with the MAPS 4.3 and LAMMPS software packages. As a new nanocomposite material used in air dehumidification application, water vapor diffusivity through Silica-Polyurethane nanocomposite membranes was measured by the random movement of water vapor molecules through the formed nanochannels in the nanocomposite. For the diffusivity value, the Einstein's relationship was employed for the movement of each single water vapor molecule during the simulation time for all suggested membranes. The results of the proposed research will contribute to enhancing the energy efficiency of air conditioning systems by choosing the membrane moisture exchanger configuration which maximizes water vapor removal while, at the same time, enhancing the silica surfaces with the desired surface modifier that will maximize diffusion through the membrane itself.
37
Kaphle, Manindra. "Simulations of human movements through temporal discretization and optimization". Licentiate thesis, KTH, Mechanics, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4585.
Texto completoResumen
Study of physical phenomena by means of mathematical models is common in various branches of engineering and science. In biomechanics, modelling often involves studying human motion by treating the body as a mechanical system made of interconnected rigid links. Robotics deals with similar cases as robots are often designed to imitate human behavior. Modelling human movements is a complicated task and, therefore, requires several simplifications and assumptions. Available computational resources often dictate the nature and the complexity of the models. In spite of all these factors, several meaningful results are still obtained from the simulations.
One common problem form encountered in real life is the movement between known initial and final states in a pre-specified time. This presents a problem of dynamic redundancy as several different trajectories are possible to achieve the target state. Movements are mathematically described by differential equations. So modelling a movement involves solving these differential equations, along with optimization to find a cost effective trajectory and forces or moments required for this purpose.
In this study, an algorithm developed in Matlab is used to study dynamics of several common human movements. The main underlying idea is based upon temporal finite element discretization, together with optimization. The algorithm can deal with mechanical formulations of varying degrees of complexity and allows precise definitions of initial and target states and constraints. Optimization is carried out using different cost functions related to both kinematic and kinetic variables.
Simulations show that generally different optimization criteria give different results. To arrive on a definite conclusion on which criterion is superior over others it is necessary to include more detailed features in the models and incorporate more advanced anatomical and physiological knowledge. Nevertheless, the algorithm and the simplified models present a platform that can be built upon to study more complex and reliable models.
38
Kuttarath, Veettil Deepak. "Thermal Design Optimization of a Miniature Condensate Particle Counter". University of Cincinnati / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1250651342.
Texto completo
39
Schamel, Andreas. "A frequency domain approach to the analysis and optimization of valve spring dynamics". Thesis, Loughborough University, 1993. https://dspace.lboro.ac.uk/2134/14724.
Texto completoResumen
In this thesis a method is derived and presented, for the efficient analysis of the steady state response of dynamic systems with time variant propenies. The method is especially attractive for the simulation of the steady state response of lightly damped systems with low numbers of degree of freedom which are forced by a periodic excitation. A major feature of the method is that the system non-linearities can be successfully modelled as time variant propenies. An ideal application for this approach is the calculation of the dynamic response of a modal model for progressive valve springs in the frequency domain. The solution method is explained and derived using this example. The differences, drawbacks, and advantages are assessed by comparison with both a linear modal model and a discrete time-domain model; correlation with actual measurement is also shown. The extreme efficiency of the method allows its application in a more general study of the dynamic propenies of valve springs. This analysis is initially discussed and examined using statistical methods. Then the frequency domain solution method is employed to perform an automatic optimization of the spring frequency characteristic for a 16 valve prototype engine application. The spring design obtained from this study has been manufactured and the resulting hardware is discussed. The measured response of this hardware is compared with simulation results for the same configuration, verifying the fmdings from the statistical investigation and the optimization. Finally open issues and further envisaged work in the area of damping mechanisms in valve springs and manufacturing issues are diScussed and an approach for the next steps to take is outlined.
40
Moghadasi, Ali [Verfasser] y Robert [Akademischer Betreuer] Seifried. "Contributions to topology optimization in flexible multibody dynamics / Ali Moghadasi ; Betreuer: Robert Seifried". Hamburg : Universitätsbibliothek der Technischen Universität Hamburg-Harburg, 2019. http://d-nb.info/1190723743/34.
Texto completo
41
Koren, Dejan. "Computational Fluid Dynamics Unstructured Mesh Optimization for the Siemens 4th Generation DLE Burner". Thesis, KTH, Mekanik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-178034.
Texto completoResumen
Every computational fluid dynamics engineer deals with a never ending story – limitedcomputer resources. In computational fluid dynamics there is practically never enoughcomputer power. Limited computer resources lead to long calculation times which result inhigh costs and one of the main reasons is that large quantity of elements are needed in acomputational mesh in order to obtain accurate and reliable results.Although there exist established meshing approaches for the Siemens 4th generation DLEburner, mesh dependency has not been fully evaluated yet. The main goal of this work istherefore to better optimize accuracy versus cell count for this particular burner intended forsimulation of air/gas mixing where eddy-viscosity based turbulence models are employed.Ansys Fluent solver was used for all simulations in this work. For time effectivisationpurposes a 30° sector model of the burner was created and validated for the meshconvergence study. No steady state solutions were found for this case therefore timedependent simulations with time statistics sampling were employed. The mesh convergencestudy has shown that a coarse computational mesh in air casing of the burner does not affectflow conditions downstream where air/gas mixing process is taking place and that a majorpart of the combustion chamber is highly mesh independent. A large reduction of cell count inthose two parts is therefore allowed. On the other hand the RPL (Rich Pilot Lean) and thepilot burner turned out to be highly mesh density dependent. The RPL and the Pilot burnerneed to have significantly more refined mesh as it has been used so far with the establishedmeshing approaches. The mesh optimization has finally shown that at least as accurate resultsof air/gas mixing results may be obtained with 3x smaller cell count. Furthermore it has beenshown that significantly more accurate results may be obtained with 60% smaller cell count aswith the established meshing approaches.A short mesh study of the Siemens 3rd generation DLE burner in ignition stage of operationwas also performed in this work. This brief study has shown that the established meshingapproach for air/gas mixing purposes is sufficient for use with Ansys Fluent solver whilecertain differences were discovered when comparing the results obtained with Ansys Fluentagainst those obtained with Ansys CFX solver. Differences between Fluent and CFX solverwere briefly discussed in this work as identical simulation set up in both solvers producedslightly different results. Furthermore the obtained results suggest that Fluent solver is lessmesh dependent as CFX solver for this particular case.
42
Gomez, Miguel J. "Optimization-based analysis of rigid mechanical systems with unilateral contact and kinetic friction /". Thesis, Connect to this title online; UW restricted, 2008. http://hdl.handle.net/1773/6793.
Texto completo
43
Mack, Elizabeth. "Hemodynamic Optimization of a Passive Assist Total Cavopulmonary Connector for ages 1-20". Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/84450.
Texto completoResumen
Currently, the surgical procedure followed by the majority of cardiac surgeons to address right ventricular dysfunction is the Fontan procedure, which connects the superior and inferior vena cava directly to the left and right pulmonary arteries bypassing the right atrium. However, this is not the most efficient configuration from a hemodynamics perspective. The goal of this study is to develop a patient-specific 4-way connector to bypass the dysfunctional right ventricle and augment the pulmonary circulation. The 4-way connector was intended to channel the blood flow from the inferior and superior vena cava directly to the right and left pulmonary arteries. By creating a connector with proper hemodynamic characteristics, one can control the jet flow interactions between the inferior and superior vena cava and streamline the flow towards the right and left pulmonary arteries. In this study, the focus was on creating a system that could identify the optimal configuration for the 4-way connector for patients from 1-20 years of age.
A platform was created in ANSYS that utilized the design of experiments (DOE) function to minimize power-loss and blood damage propensity in the connector based on junction geometries. A CFD model was created to simulate the blood flow through the connector. Then the geometry of the bypass connector was parameterized for the DOE process. The selected design parameters included inlet and outlet diameters, radius at the intersection, and length of the connector pathways. The chosen range for each geometric parameter was based on the relative size of the patient’s arteries found in the literature. It was confirmed that as the patient’s age and artery size change, the optimal size and shape of the connector also changes. However, the corner radius did not decrease at the same rate as the opening diameters. This means that creating different sized connectors is not just a matter of scaling the original connector to match the desired opening diameter. However, it was found that power losses within the connector decrease and average and maximum blood traversal time through the connector increased for increasing opening radius.
A follow up study was conducted to try to reduce or negate a consistent recirculation area found at the center of the connectors. To accomplish this a flow diverter was added to the center of the connector and optimized for each of the connectors found for the age groups used. From this study, it was found that the diverter did negate the recirculation area form the centers of the connectors. A separate Blood Damage Index (BDI) study was also run on this optimized connector with a diverter, the optimized connectors from the first study and a baseline connector. This showed a decrease in IVC sourced BDI for the optimized versions of the connector compared to the baseline geometries. This information could be used to create a more specific relationship between the opening radius and the flow characteristics. So in order to create patient specific connectors, either a new more complicated trend needs to be found or an optimization program would need to be run on each patient’s specific geometry when they need a new connector.Master of Science
Currently, the surgical procedure followed by the majority of cardiac surgeons to address a nonfunctioning right portion of the heart is the Fontan procedure, which connects the two major inflow venous structures from the right side of the heart directly to the two major outflow venous structures, bypassing the right nonfunctioning right portion of the heart. However, this is not the most efficient configuration from a fluid flow perspective. The goal of this study is to develop a patient-specific 4-way connector to bypass the nonfunctioning right side of the heart and aid in overall circulation. Just like the Fontan procdure, the 4-way connector was intended to channel the blood flow from the two main inflow venous structures directly to the two major outflow venous structures. By creating a connector with proper fluid flow characteristics, one can control the flow interactions between the two inflows and streamline the flow towards the two outflow venous structures. In this study, the focus was on creating a system that could identify the optimal configuration for the 4-way connector for patients from 1-20 years of age. A platform was created in a modeling and simulation program, called ANSYS, that utilized the design of experiments (DOE) function to minimize power-loss and the likelihood of blood damage in the connector based on connector geometries. A CFD model was created to simulate the blood flow through the connector. Then the geometry of the bypass connector was parameterized for the DOE process. The selected design parameters included inlet and outlet diameters, radius at the intersection, and length of the connector pathways. The chosen range for each geometric parameter was based on the relative size of the patient’s arteries found in the literature. It was confirmed that as the patient’s age and artery size change, the optimal size and shape of the connector also changes. From the results of the first study showed a very decreasing relationship between the opening radius and the corner radius as the opening radius increased in size. It was also found that power losses within the connector decrease and average and maximum blood traversal time through the connector increased for increasing opening radius. A follow up study was conducted to try to reduce or negate a consistent recirculation area found at the center of the connectors. To accomplish this a flow diverter was added to the center of the connector and optimized for each of the connectors found for the age groups used. From this study, it was found that the diverter did negate the recirculation area form the centers of the connectors. A separate Blood Damage Index (BDI) study was also run on this optimized connector with a diverter, the optimized connectors from the first study and a baseline connector. This showed a decrease in BDI from the venous structure with the larger inlet flow for the optimized versions of the connector compared to the baseline geometries. This information could be used to create a more specific relationship between the opening radius and the flow characteristics. So in order to create patient specific connectors, either a new more complicated trend needs to be found or an optimization program would need to be run on each patient’s specific geometry when they need a new connector.
44
Takemiya, Tetsushi. "Aerodynamic design applying automatic differentiation and using robust variable fidelity optimization". Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26515.
Texto completoResumen
Thesis (Ph.D)--Aerospace Engineering, Georgia Institute of Technology, 2009.Committee Chair: Mavris, Dimitri; Committee Member: Alley, Nicholas; Committee Member: Lakshmi, Sankar; Committee Member: Sriram, Rallabhandi; Committee Member: Stephen, Ruffin. Part of the SMARTech Electronic Thesis and Dissertation Collection.
45
Mandal, Pritesh. "Design and Optimization of Boundary Layer Ingesting Propulsor". University of Cincinnati / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1573812115023373.
Texto completo
46
El-Ansary, Amgad Saad Eldin. "Minimization of stresses and pressure surges in pipes using nonlinear optimization". Diss., The University of Arizona, 1989. http://hdl.handle.net/10150/184632.
Texto completoResumen
The control of stresses and liquid pressure surges in pipes is an important problem in the design of hydraulic pipe networks. The method of characteristics has been used to solve the transient stresses and pressures in liquid-filled piping systems. The friction force is included in the equations of motion for the fluid and the pipe wall. The maximum pressure and maximum stress at any point along the length of the pipe are evaluated for the entire simulation time. A nonlinear search technique has been developed using the simplex method. The optimal valve closure is sought, that will minimize the maximum pressure and/or stresses. A continuous optimal valve closure policy is specified using spline functions. Numerical examples are presented showing the reduction of the dynamic pressure and the dynamic stress from linear valve closure to optimal valve closure for a simple pipeline and a complex pipeline. Also, a method for choosing the shortest time of closure which will keep the stresses below specified allowable stresses is presented.
47
Waldron, William Michael. "Optimal vertical plane booster guidance including pitch dynamics". Diss., This resource online, 1996. http://scholar.lib.vt.edu/theses/available/etd-10042006-143908/.
Texto completo
48
Fu, Xiaojing S. M. Massachusetts Institute of Technology. "High-resolution simulation of pattern formation and coarsening dynamics in 3D convective mixing". Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/106958.
Texto completoResumen
Thesis: S.M., Massachusetts Institute of Technology, School of Engineering, Center for Computational Engineering, Computation for Design and Optimization Program, 2015.Cataloged from PDF version of thesis.
Includes bibliographical references (pages 45-47).
Geologic C0₂ sequestration is considered a promising tool to reduce anthropogenic C0₂ emissions while allowing continued use of fossil fuels for the current time. The process entails capturing C0₂ at point sources such as coal-fired power plants, and injecting it in its supercritical state into deep saline aquifers for long-term storage. Upon injection, C0₂ partially dissolves in groundwater to form an aqueous solution that is denser than groundwater. The local increase in density triggers a gravitational instability at the boundary layer that further develops into columnar C0₂-rich plumes that sink away. This mechanism, also known as convective mixing, greatly accelerates the dissolution rate of C0₂ into water and provides secure storage of C0₂ underground. Understanding convective mixing in the context of C0₂ sequestration is essential for the design of injection and monitoring strategies that prevent leakage of C0₂ back into the atmosphere. While current studies have elucidated various aspects of this phenomenon in 2D, little is known about this process in 3D. In this thesis we investigate the pattern-formation aspects of convective mixing during geological C0₂ sequestration by means of high-resolution three-dimensional simulation. We find that the C0₂ concentration field self-organizes as a cellular network structure in the diffusive boundary layer right beneath the top boundary. By studying the statistics of the cellular network, we identify various regimes of finger coarsening over time, the existence of a nonequilibrium stationary state, and an universal scaling of 3D convective mixing. We explore the correlation between the observed network pattern and the 3D flow structure predicted by hydrodynamics stability theory.
by Xiaojing Fu.
S.M.
49
Wong, Kin Ming. "Evolutionary structural form optimisation for lateral stiffness design of tall buildings /". View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202007%20WONGK.
Texto completo
50
Xiong, Yeyue. "Developing Fast and Accurate Water Models for Atomistic Molecular Dynamics Simulations". Diss., Virginia Tech, 2021. http://hdl.handle.net/10919/105002.
Texto completoResumen
Water models are of great importance for different fields of studies such as fluid mechanics, nano materials, and biomolecule simulations. In this dissertation, we focus on the water models applied in atomistic simulations, including those of biomolecules such as proteins and DNA. Despite water's simple structure and countless studies carried out over the decades, the best water models are still far from perfect. Water models are normally divided into two types--explicit model and implicit model. Here my research is mainly focused on explicit models. In explicit water models, fixed charge n-point models are most widely used in atomistic simulations, but have known accuracy drawbacks. Increasing the number of point charges, as well as adding electronic polarizability, are two common strategies for accuracy improvements. Both strategies come at considerable computational cost, which weighs heavily against modest possible accuracy improvements in practical simulations. With a careful comparison between the two strategies, results show that adding polarizability is a more favorable path to take. Optimal point charge approximation (OPCA) method is then applied along with a novel global optimization process, leading to a new polarizable water model OPC3-pol that can reproduce bulk liquid properties of water accurately and run at a speed comparable to 3- and 4-point non-polarizable water models. For practical use, OPC3-pol works with existing non-polarizable AMBER force fields for simulations of globular protein or DNA. In addition, for intrinsically disordered protein simulations, OPC3-pol fixes the over-compactness problem of the previous generation non-polarizable water models.Doctor of Philosophy
With the rapid advancements of computer technologies, computer simulation has become increasingly popular in biochemistry research fields. Simulations of microscopic substances that are vital for living creatures such as proteins and DNAs have brought us more and more insights into their structures and functions. Because of the fact that almost all the microscopic substances are immersed in water no matter they are in a human body, a plant, or in bacteria, accurately simulating water is crucial for the success of such simulations. My research is focused on developing accurate and fast water models that can be used by researchers in their biochemical simulations. One particular challenge is that water in nature is very flexible and properties of water can change drastically when its surroundings change. Many classical water models cannot correctly mimic this flexibility, and some more advanced water models that are able to mimic it can cost several times more computing resources. Our latest water model OPC3-pol, benefited from a new design, accurately mimics the flexibility and runs as fast as a traditional rigid water model.