Siga este enlace para ver otros tipos de publicaciones sobre el tema: Copper ores.
Artículos de revistas sobre el tema "Copper ores"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte los 50 mejores artículos de revistas para su investigación sobre el tema "Copper ores".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Explore artículos de revistas sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.
1
Kenzhaliyev, Bagdaulet, Aigul Koizhanova, Tatiana Chepushtanova, Arailym Mukangaliyeva y David Magomedov. "INNOVATIVE METHODS FOR PROCESSING COPPER ORES IN KAZAKHSTAN: A COMPREHENSIVE APPROACH TO ENHANCING THE EFFICIENCY OF VALUABLE COMPONENT EXTRACTION". SERIES CHEMISTRY AND TECHNOLOGY, n.º 3 (1 de octubre de 2024): 124–36. http://dx.doi.org/10.32014/2024.2518-1491.241.
Texto completoResumen
This article presents an innovative approach to processing copper ore from one of the deposits in Kazakhstan, aimed at enhancing the efficiency of copper extraction from materials with a complex mineral composition. The described methodology includes several key stages: comprehensive analysis of the ore's material composition, gravity and flotation beneficiation, as well as hydrometallurgical processes. During the study, the ores underwent preliminary preparation, including crushing and grinding to the required fineness. Experiments on gravity and flotation beneficiation demonstrated that optimizing the parameters of these processes significantly increases the yield of copper concentrate. Additionally, sulfuric acid leaching conducted showed high efficiency in extracting copper from the ground ore. The research results confirm that a comprehensive approach to copper ore processing ensures high efficiency in extracting valuable components and opens up prospects for the sustainable and economically viable utilization of complex copper ores
2
Tran, Hien Thi y Phong Duc Pham. "Research and complete the processing technology of Son La oxide copper ores for the Tay Bac Minerals Joint Stock Company". Journal of Mining and Earth Sciences 62, n.º 3b (20 de julio de 2021): 22–29. http://dx.doi.org/10.46326/jmes.2021.62(3b).03.
Texto completoResumen
The copper ore processing plant of the Tay Bac Minerals Joint Stock Company has been designed and operated to produce metallic copper from copper sulphide ores and copper oxide ores in Son La province. Copper sulphide ores are processed to produce copper concentrates with content of more than 20% Cu for the next processing stage, while copper oxide ores, with average content of 1÷3% Cu and after grinding, are fed directly into hydrometallurgical processes to extract copper. However, this process requires large amount of chemicals. Therefore, the economic efficiency is not high. The National Institute of Mining - Metallurgy Science and Technology has researched and proposed a reasonable technology process for Son La copper oxide ores for solving difficulties and perfecting the processing technology at the plant that improves economic efficiency and minimizes environmental pollutions. This report presents results of the experimental production research project with the code CNKK.013.19, implemented by the Institute of Materials Science and sponsored by the Ministry of Industry and Trade.
3
I., Blinov y Vinogradov N. "Mineral Composition of Ores Used at Ustye-I, a Fortified Settlement of the Bronze Age (Chelyabinsk Region)". Teoriya i praktika arkheologicheskikh issledovaniy 33, n.º 4 (diciembre de 2021): 166–84. http://dx.doi.org/10.14258/tpai(2021)33(4).-10.
Texto completoResumen
At the fortified settlement of the Bronze Age, Ustye-I (South Trans-Urals), metal products of copper, arsenic and tin bronzes, numerous fragments of metallurgical slags, as well as fragments of copper ores have been discovered. According to the results of early studies, pure copper predominates among metal items (53.4% of finds), but also a significant part contains an admixture of arsenic (25.4% of finds), tin (13.6% of finds) and both components simultaneously (7.6% of finds). Several alloying components of the samples are simultaneously found in slags: Pb (50% of cases), As (49% of cases), Zn (40% of cases), Bi (38% of cases), Sn (7% of cases), Ni (4% of cases), Sb (1% of cases). To identify the relationship between the incoming raw materials and the received metal, 15 ore samples were examined. The ores studied are ‘gravelly’ clasts with a size of 5 mm to several centimeters, and ‘sandy’ ores with a size of 2–3 mm. According to their mineral composition, ores are subdivided into malachite, azurite, and limonite. The main copper minerals are malachite and azurite; chrysocolla is found occasionally, chalcopyrite, cuprite are rarely found. Copper is bound to Fe- and Mn-hydroxides. We have identified copper slag fragments in ‘sandy’ ores. In all types of ores, natural alloying components are very rare and are represented by Pb and Zn. These elements can form their own minerals (mottramit, a mineral of the plumbogummite family) or act as an impurity to malachite (up to 0.62 wt% ZnO), azurite (up to 1.12 ZnO and up to 2.37 PbO), iron hydroxides (up to 2.66 ZnO and up to 2.02 PbO) or manganese hydroxides (up to 0.41 ZnO and up to 9.48 PbO). No As and Sn impurities were found. The presence of numerous fragments of brown iron ore at the settlement, the close location of copper mines indicates that the settlers were engaged in the extraction and processing of copper ore. The widespread occurrence of ores, consisting mainly of malachite and azurite, indicates that the ores were mined from the upper parts of the oxidation zone, and the metal smelted from these ores must correspond to pure copper. The distribution of Pb and Zn impurities indicates that some of the copper ores originate from the oxidation zones of pyrite ores or deposits of other formational types with a similar ore composition. The difference in the compositions of the ores found at the settlement and the compositions of slag and metal is associated with several sources of ores. The sources of copper ores could be mines located near the settlement. Arsenic-bearing ores could have come from mines in adjacent areas. Tin ores were brought in as a result of trans-regional exchange with the Central Asian region.
4
Fatyanov, А. y S. Scheglova. "OPTIMIZATION OF THE PROCESSING TECHNOLOGY OF COPPER ORES OF THE UDOKAN DEPOSIT". Transbaikal State University Journal 27, n.º 7 (2021): 33–40. http://dx.doi.org/10.21209/2227-9245-2021-27-7-33-40.
Texto completoResumen
The composition of the mineral raw materials of the Udokan copper deposit has been studied. It is established that the copper minerals antlerite and brochantite are represented both in the form of ordinary and crystal hydrate forms, the properties of which are reflected in the flotation process. Studies were carried out on sulfide, mixed and oxidized samples of ores from the Udokan deposit. A unified flotation scheme for processing such ores with the production of sulfide and mixed copper concentrate with subsequent hydro- and pyrometallurgical methods is recommended. The objects of research are sulfide, mixed and oxidized copper ores of the Udokan deposit. The subject of the study is the technology of processing copper ores. Research objectives: – study of the mineral, material, and chemical composition of copper ores of the Udokan deposit; – study of existing technologies for processing copper ores; – conducting laboratory experiments on sulfide, mixed and oxidized ore samples of the Udokan deposit; – recommendation of a unified enrichment scheme for all types of copper ores of the Udokan deposit. Research methods. The work was carried out on the basis of studying the available sources on the occurrence, composition and structure of copper ores of the Udokan deposit, methods of their processing. In the course of laboratory studies, a flotation method of mineral enrichment was used with the use of operations to stabilize the energy state of the dispersed system (with Eh control) and subsequent electrochemical treatment of the pulp. The authors emphasize that the recommended scheme for processing copper ores from the Udokan deposit will optimize the processing technology and increase the efficiency of mining this deposit. Hydro- and pyrometallurgical methods are the most optimal for processing the obtained sulfide and mixed concentrates
5
Zalesov, M. V., V. A. Grigoreva, V. S. Trubilov y A. Ya Boduen. "Designing of engineering solutions to enhance efficiency of high-copper gold-bearing ore processing". Mining Industry Journal (Gornay Promishlennost), n.º 5/2021 (12 de noviembre de 2021): 51–56. http://dx.doi.org/10.30686/1609-9192-2021-5-51-56.
Texto completoResumen
The modern metals industry is characterised by a downward trend in the quality of ores involved in processing, and conventional methods of extracting useful components are inefficient for raw materials with complex composition. To maintain the growing level of metal production it is required to introduce new efficient technologies for processing of low-grade and refractory ores as well as man-made deposits. The article describes processing methods of refractory raw materials with high cyanide content using copper-gold ores as an example, where gold is the primary commodity, and copper is the accompanying useful component. The most common method of processing copper-gold ores is preconcentration followed by selective leaching of copper and gold. In some cases, technologies involving copper by-products and cyanide recovery from the cyanide leaching solutions offer equally effective options for processing of the copper-gold ores and concentrates. Copper-gold ores are processed at gold mines using the cyanide procedures, supplemented if required by gravity and flotation concentration. In all variations of the cyanide treatment, most of copper minerals actively react with cyanides of alkali metals, binding the CN– ions into the copper complex of [Cu(CN3)]2–. This reaction results in an increased solvent consumption, as well as in number of challenges related to cleaning tailings and slurries from highly toxic cyanide compounds and dissolved copper. In addition to technological complications associated with the need to meet strict requirements for the maximum permissible concentrations, copper accumulated in the cycling solutions also causes a decrease in gold extraction from the processed ores.
6
Chen, Bo Wei, Jian Kang Wen y Guo Cheng Yao. "Acidophiles and its Use in Mineral Biomining with Emphasis on China". Advanced Materials Research 926-930 (mayo de 2014): 4201–4. http://dx.doi.org/10.4028/www.scientific.net/amr.926-930.4201.
Texto completoResumen
Acidophiles have been widely used in heap and dump bioleaching of secondary copper sulfide ores and biooxidation of refractory gold ores. 22 genera of acidophiles have been found in biomining environments. This paper gives a preliminary introduction to the application of mineral biomining in China. Challenges and technical trends for heap bioleaching of primary copper sulfide ores, purification of bioleaching solution of polymetallic sulfide ores and biooxidation of carbonaceous refractory gold ores are also recommended.
7
Neira, Andrés, Diana Pizarro, Víctor Quezada y Lilian Velásquez-Yévenes. "Pretreatment of Copper Sulphide Ores Prior to Heap Leaching: A Review". Metals 11, n.º 7 (2 de julio de 2021): 1067. http://dx.doi.org/10.3390/met11071067.
Texto completoResumen
Although the main cause of hydrometallurgical plant closures is the depletion of oxidized copper minerals reserves, the lack of new hydrometallurgy projects also contributes to these closures. One solution is to be able to process copper sulphide ores hydrometallurgically. However, it is widely known that sulphide copper ores—and chalcopyrite in particular—have very slow dissolution kinetics in traditional leaching systems. An alternative to improve the extraction of copper from sulphide ores is the use of a pretreatment process. Several investigations were developed evaluating the effects of pretreatment, mainly in the extraction of copper from chalcopyrite in chloride media. This study presents a review of various pretreatment methods prior to heap leaching to aid in the dissolution of copper from sulphide ores. Different variables of pretreatment that affect the extraction of copper were identified, including the type of salts used in agglomeration, curing time, and curing temperatures. Successful cases such as the implementation of the CuproChlor® process (use of calcium chloride), and various pilot studies using sodium chloride and temperature, show that pretreatment is an alternative that aids in the dissolution of copper from sulphide ores.
8
Top, J. L., J. N. M. Agricola y A. F. Fort. "Concentration of Cupriferous Micas by Hgms". Magnetic Separation News 2, n.º 3 (1 de enero de 1988): 145–51. http://dx.doi.org/10.1155/1988/45689.
Texto completoResumen
High Gradient Magnetic Separation tests have been carried out on low grade refractory copper ores, consisting mainly of cupriferous micas. An effective concentration of copper was obtained for two types of ores. The copper grade was improved 2 and 1.5 times at a recovery of about 90%. In particular, the amount of quartz in the concentrate could be reduced. This indicates that HGMS could be a successful method for concentration of these ores.
9
Zvereva, N., V. Myazin y I. Kostromina. "Technological possibility of increasing the complexity of the use of gold-bearing polymetallic ores of the Novo-Shirokinsky deposit". TRANSBAIKAL STATE UNIVERSITY JOURNAL 28, n.º 6 (2022): 6–14. http://dx.doi.org/10.21209/2227-9245-2022-28-6-6-14.
Texto completoResumen
Gold-bearing polymetallic ores of the Novo-Shirokinsky deposit (further NShD) are complex, containing other valuable components besides gold and silver, which include lead, zinc, copper, iron, etc. According to the content of sulfides in the ores, they belong to the moderate sulfide type. The main feature of the material composition of ores NShD: expressed multicomponent content of valuable minerals; proximity of flotation properties of shared minerals; especially valuable mineral in ores, in addition to gold and silver, is copper, which is mainly concentrated in lead concentrate. The highest technological indicators of ore beneficiation are achieved when they are enriched according to a collective technological scheme. The technological scheme of ore beneficiation at the plant is shown in fig. 1. A lead-copper concentrate is obtained, which, as a rule, is subsequently sent for subsequent selective flotation. The factory produces two main concentrates - lead and zinc (corresponding to TU 07.29.15-002-24722376-2018, TU 1725-001-24722376-2011). This work is aimed at increasing the complexity of the use of NShD polymetallic ores in order to justify the possibility of additional production of copper concentrate at the plant. The object of the study – gold-bearing polymetallic ores of the Novo-Shirokinsky deposit. The subject of the study – flotation process of ore beneficiation as the basis for obtaining copper concentrate by constructing effective technological schemes for the polymetallic ores’ processing. The main idea of the work – sequential extraction of copper from lead concentrates using retreatments and optimal operating parameters of the flotation process
10
Sanwani, Edy, Riria Zendy Mirahati y Siti Khodijah Chaerun. "Recovery of Copper from Pyritic Copper Ores Using a Biosurfactant-Producing Mixotrophic Bacterium as Bioflotation Reagent". Solid State Phenomena 262 (agosto de 2017): 181–84. http://dx.doi.org/10.4028/www.scientific.net/ssp.262.181.
Texto completoResumen
In an attempt to investigate the use of bacteria and their metabolites as bioflotation reagents for environmentally friendly mineral processing, laboratory cell flotation tests were carried out using copper sulfide ores bearing a high content of pyrite, which were mixed with a biosurfactant-producing mixotrophic bacterium as bioflotation reagents. The interaction of bacterial cells and their metabolic products with the sulfide ores resulted in the alteration of the surface chemistry of both ores and bacterial cells as evidenced by FTIR and SEM-EDS observations as well as surface tension and contact angle measurements. The change in the surface properties of the sulfide ores in turn enabled the bacterium to function as flotation bioregeants in the flotation of copper sulfide ores as a function of bacterial cell concentration, conditioning time, flotation time and pH. Overall, the bacterium and its metabolites as bioreagents yielded flotation recoveries which might be attributed to the multi-function of the bacterium as depressant, collector and frother. Thus, the bacteria tested in this study could potentially be used as flotation bioreagents, providing an alternative to conventional flotation reagents.
11
Chaerun, Siti Khodijah, Frideni Yushandiana Putri, Mohammad Zaki Mubarok, Wahyudin Prawira Minwal y Zela Tanlega Ichlas. "Bioleaching of Supergene Porphyry Copper Ores from Sungai Mak Gorontalo of Indonesia by an Iron- and Sulfur-Oxidizing Mixotrophic Bacterium". Solid State Phenomena 262 (agosto de 2017): 20–23. http://dx.doi.org/10.4028/www.scientific.net/ssp.262.20.
Texto completoResumen
Environmentally friendly mining technologies have to be developed extensively to avoid the impact of mining activities with respect to environmental concern. One example of such technology is bioleaching which has been developed worldwide and is regarded as an appropriate technology for the extraction of metals from polymetallic ores such as supergene porphyry copper ores, mainly consisting of secondary copper sulfides, including chalcocite (Cu2S), covellite (CuS), or oxide minerals, i.e., cuprite (Cu2O) and tenorite (CuO). The extraction process for this complex ore generally requires high temperature, high pressure and/or high acid concentration. For the economic extraction of valuable copper from such ores, the bioleaching of supergene porphyry copper ore from Sungai Max in Southeast Sulawesi of Indonesia was investigated in shake-flask experiments at room temperature (28 °C) for 14 days using an iron- and sulfur-oxidizing bacterium (Alicyclobacillus sp.) indigenous to an Indonesian mine site. The main mineralogical composition of gangue minerals contained in this ore sample included quartz, muscovite, kaolinite and alunite. The relatively high copper extraction efficiencies were obtained over a 14-day period of the bioleaching experiments as a function of pH, pulp density and NaCl concentration. Therefore, the findings of this study provide the first information of bioleaching process of supergene porphyry copper ores in Indonesia that may highly be useful for developing an economical and environmentally friendly extraction process of such complex ores.
12
Fu, Yanhua, Hongfei Xie, Yachun Mao, Tao Ren y Dong Xiao. "Copper Content Inversion of Copper Ore Based on Reflectance Spectra and the VTELM Algorithm". Sensors 20, n.º 23 (27 de noviembre de 2020): 6780. http://dx.doi.org/10.3390/s20236780.
Texto completoResumen
Copper is an important national resource, which is widely used in various sectors of the national economy. The traditional detection of copper content in copper ore has the disadvantages of being time-consuming and high cost. Due to the many drawbacks of traditional detection methods, this paper proposes a new method for detecting copper content in copper ore, that is, through the spectral information of copper ore content detection method. First of all, we use chemical methods to analyze the copper content in a batch of copper ores, and accurately obtain the copper content in those ores. Then we do spectrometric tests on this batch of copper ore, and get accurate spectral data of copper ore. Based on the data obtained, we propose a new two hidden layer extreme learning machine algorithm with variable hidden layer nodes and use the regularization standard to constrain the extreme learning machine. Finally, the prediction model of copper content in copper ore is established by using the algorithm. Experiments show that this method of detecting copper ore content using spectral information is completely feasible, and the algorithm proposed in this paper can detect the copper content in copper ores faster and more accurately.
13
Gayar, El Sayed El y M. P. Jones. "A Possible Source of Copper Ore Fragments Found at the Old Kingdom Town of Buhen". Journal of Egyptian Archaeology 75, n.º 1 (agosto de 1989): 31–40. http://dx.doi.org/10.1177/030751338907500104.
Texto completoResumen
An archaeological investigation of the Old Kingdom town of Buhen in 1962 revealed an ancient copper ‘factory’, some copper ore fragments from which have been examined by modern analytical methods. The results show that the main copper-bearing mineral in the ore is malachite but this has been extensively altered (in situ) to the green copper chloride, atacamite. The ore also contains a very high proportion of gold. The mineralogy of the ‘Buhen’ ore has been compared with known copper ores from Egypt and Northern Sudan. These other ores either do not match the Buhen specimens or they occur very long distances from the town. The only mining activity close to Buhen was at the gold mines of Kush, some of which were on the Nile immediately up-stream of the town and were worked in Middle Kingdom times. No mineralogical details of the Kush ores are known but it is possible in view of their location, and also because of the high proportion of gold found in the Buhen specimens, that it was the Kush ores which were used, in the Old Kingdom, for the extraction of copper.
14
Zhang, Chi, Xiao Dong Jia, Ya Lin Lu, Dian Wen Liu y Xiao Lin Zhang. "Review on New Process and New Reagent of Copper Oxide". Advanced Materials Research 1010-1012 (agosto de 2014): 1618–21. http://dx.doi.org/10.4028/www.scientific.net/amr.1010-1012.1618.
Texto completoResumen
The paper briefly analyzes and systematically summarizes flotation process and chemical treatment method of low-grade oxidized copper ores in recent years. The new high-efficient collectors and system of reagent combined usage are developed widely and have become an important research direction of oxidized copper ores.
15
Zhang, Tie Min, Zhi Cong Wei y Ying Bo Mao. "Ammonia Leaching Study on Refractory Oxidised Copper Ores". Applied Mechanics and Materials 563 (mayo de 2014): 53–56. http://dx.doi.org/10.4028/www.scientific.net/amm.563.53.
Texto completoResumen
Ammonia leaching research is carried out on a certain oxidised copper ores. The effects of oxidized copper ores which came from Yunnan Province were studied in laboratory in order to find out the optimum leaching conditions under normal temperature and pressure. The ores belonged to typical high binding rate minerals. The optimum conditions obtained were as follows: granding fineness about 90% -0.074mm, ammonia concentration 2 mol/l, ammonium fluoride concentration 1.5mol/l , leaching time 2h, and liquid-solid ratio 3:1.The leaching rate of this ore could reach 86%.
16
Jiang, Tai Guo, Jian Jun Fang, Tie Min Zhang, Shan Wang y Ying Bo Mao. "The Effect of Different Collectors on Oxidised Copper Ores Flotation". Advanced Materials Research 962-965 (junio de 2014): 814–17. http://dx.doi.org/10.4028/www.scientific.net/amr.962-965.814.
Texto completoResumen
For a refractory oxidised copper ores in Sichuan province, studing the different collectors on the influence of oxidised copper ores sulfide flotation behavior. The results showed that: the collecting performance of sodium isoamylxanthate was better. When the dosage of sodium isoamylxanthate was 550g/t, the copper concentrate grade of 19.09% could be obtained and recovery was 82.65% under the appropriate process conditions in the closed circuit experiment.
17
DENG, TONG y JIAYONG CHEN. "Treatment of Oxidized Copper Ores with Emphasis on Refractory Ores". Mineral Processing and Extractive Metallurgy Review 7, n.º 3-4 (abril de 1991): 175–207. http://dx.doi.org/10.1080/08827509108952671.
Texto completo
18
Jiang, Tai Guo, Zhi Chong Wei y Tie Min Zhang. "Study on the Beneficiation of an Oxidised Copper Ores in Yunnan Province". Applied Mechanics and Materials 631-632 (septiembre de 2014): 641–45. http://dx.doi.org/10.4028/www.scientific.net/amm.631-632.641.
Texto completoResumen
For a refractory oxidised copper ores in Yunnan province, studing the beneficiation of a oxidised copper ores sulfide flotation behavior. The results showed that: When ethylenediamine phosphate was added with the dosage of 120 g/t, the final copper concentrates were gained with the grade of 21.06% and recovery of 83.20%. Compared to the direct sulfide flotation, the concentrate grade was raised by 3.59% and the recovery was increased by 7.33%.
19
RYLNIKOVA, M. V., G. I. AYNBINDER, N. A. MITISHOVA y L. A. GADZHIEVA. "RESEARCHING REGULATIONS OF FIRE SULFIDE ORE AND BREED DURING COMBINED DEPOSIT DEVELOPMENT". News of the Tula state university. Sciences of Earth 2, n.º 1 (2020): 341–56. http://dx.doi.org/10.46689/2218-5194-2020-2-1-341-356.
Texto completoResumen
Mineralogical and mineralogical-graphic analyzes of samples of the host and ore-bearing rocks of copper-zinc-pyrite deposits were carried out. The Program and the corresponding research methods offactors and patterns of development of the oxidation processes of sulfide ores and rocks have been developed and tested. The results of chemical-technological studies of sulfur-pyrite, copper-pyrite, copper-zinc ores, sericite-quartz rocks and metamorphosed tuffs are presented.
20
Ivasenko, I. B., R. A. Vorobel, V. M. Uchanin, O. R. Berehulyak y T. S. Mandziy. "Detection of chalcopyrite in digital images of copper ore sample sections". Information extraction and processing 2023, n.º 51 (14 de diciembre de 2023): 52–61. http://dx.doi.org/10.15407/vidbir2023.51.052.
Texto completoResumen
Copper ores are mineral formations of natural origin, the concentration of copper or copper compounds in which is sufficient for their commercial mining. Because of this, copper ores are on the list of minerals that are of strategic importance for the sustainable development of the economy and defense capability of Ukraine. In addition, due to the high thermal conductivity, copper and its alloys are widely used for the manufacture of various types of heat exchangers and radiators. The content of copper in ores usually ranges from 1 to 5%; ores containing less than 0.5% copper are unprofitable for processing at the current level of technology. Mining of copper is of strategic importance, as copper is the main material for the production of cable products and other conductive parts in the electrical industry. The efficiency of technological processes in the mining and industry during the production of copper depends on the quality of ores in relation to the content of minerals that contain copper. Copper ore can be considered a heterogeneous material consisting of two homogeneous phases, one phase is host rock, and the other is copper mineral. Modern image processing techniques have allowed as to automate the identification of minerals in ore samples. Automatic recognition and quantification of minerals using X-Ray tomography, scanning electronic microscope, light microscopy, is one of the most important problems in ore processing systems, as the amount of the minerals in the ore must be determined for further processing. A method of segmentation of colour images of sections of test samples of copper ore is proposed to estimate the percentage content of its components in the section of the tested samples. It is based on the use of chalcopyrite colour features in the HSV model. This colour-based segmentation method is proposed to exploit the average value and distribution of HSV colour components of chalcopyrite in an copper ore image. Segmentation parameters are configured. The experimental results of the segmentation of colour images of copper ore slices by the proposed method are analyzed. The effectiveness of the method is checked using synthesized test images. The method provides an absolute error less than 2.5%.
21
Ignatkina, V. A., V. A. Bocharov, A. R. Makavetskas, A. A. Kayumov, D. D. Aksenova, L. S. Khachatryan y Yu Yu Fishchenko. "RATIONAL PROCESSING OF REFRACTORY COPPER-BEARING ORES". Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy, n.º 3 (14 de junio de 2018): 6–18. http://dx.doi.org/10.17073/0021-3438-2018-3-6-18.
Texto completoResumen
The paper presents the results obtained when studying material compositions of four samples of refractory copper-bearing ores from the Uzelga deposit along with technological solutions to improve their processing parameters. The refractoriness of ores is associated with a thin dissemination (up to a micron size) and close intergrowth of ore and rock minerals. Ferrous sulfides are represented by a wide range of minerals: pyrite, marcasite and their variety melnikovite, arsenic pyrite and arsenopyrite; sooty melnikovite has a higher flotation activity. The reduction of iron sulfides from 89 to 29 % is followed by a proportional increase of easy-floatable rock minerals to 45 % and clay to 9 %. These properties make these sulfides difficult to process (float) and maintain ore refractoriness. The content of copper sulfides in ore samples varies from 3,32 to 7,29 %; the relative fraction of copper sulfide in a form of tennantite in different deposit samples varies from 29 to 93 %. Copper is also present as chalcopyrite and bornite. The best flotation activity of tennantite can be seen in neutral and weak acid media in contrast with standard flotation mode for chalcopyrite and bornite with butyl xanthate in a high-alkaline calcareous medium. Free grains of copper minerals can be selectively extracted into the intermediate flotation copper concentrates when grinding maximum 60 % of the –71-μm class. The technology of flotation in a low-alkaline medium is developed for refractory copper-bearing ores with variable tennantite content using the M-TF selective sulfhydryl collector in intermediate copper flotations and copper concentrate upgrading cycle; aeration used to suppress melnikovite flotation activity makes it possible to achieve 80 % copper recovery into conditioned copper concentrate. Bornite, tennantite, chalcopyrite and sphalerite disseminated in pyrite make it rational to obtain copper-pyrite, copper-zinc-pyrite products with their yield up to 12 % for pyroand hydrometallurgical processing.
22
Jiang, Tai Guo, Jian Jun Fang, Tie Min Zhang, Shan Wang y Ying Bo Mao. "The Effects of Different Depressants on Oxidised Copper Ores Flotation". Advanced Materials Research 915-916 (abril de 2014): 1118–23. http://dx.doi.org/10.4028/www.scientific.net/amr.915-916.1118.
Texto completoResumen
For refractory oxidised copper ores of Huidong Sichuan province, studing the different depressants on the influence of oxidised copper ores flotation behavior. The results showed that: the depressanting effect of the combination of sodium hexametaphosphate primarily is better. When the dosage of the combination of sodium hexametaphosphate and sodium humate reagent is 300 g/t, ratio is 2:1,the recovery of copper concentrate is 83.31and the grade is 19.01 in the closed circuit experiment.
23
Medina, Diego y Corby G. Anderson. "A Review of the Cyanidation Treatment of Copper-Gold Ores and Concentrates". Metals 10, n.º 7 (5 de julio de 2020): 897. http://dx.doi.org/10.3390/met10070897.
Texto completoResumen
Globally, copper, silver, and gold orebody grades have been dropping, and the mineralogy surrounding them has become more diversified and complex. The cyanidation process for gold production has remained dominant for over 130 years because of its selectivity and feasibility in the mining industry. For this reason, the industry has been adjusting its methods for the extraction of gold, by utilizing more efficient processes and technologies. Often, gold may be found in conjunction with copper and silver in ores and concentrates. Hence, the application of cyanide to these types of ores can present some difficulty, as the diversity of minerals found within these ores can cause the application of cyanidation to become more complicated. This paper outlines the practices, processes, and reagents proposed for the effective treatment of these ores. The primary purpose of this review paper is to present the hydrometallurgical processes that currently exist in the mining industry for the treatment of silver, copper, and gold ores, as well as concentrate treatments. In addition, this paper aims to present the most important challenges that the industry currently faces, so that future processes that are both more efficient and feasible may be established.
24
Jikia, Nana, Demur Talakhadze y Anzor Abshilava. "Processing Questions of Madneuli Copper Enrichment Plant Tails". Works of Georgian Technical University, n.º 2(528) (29 de mayo de 2023): 47–54. http://dx.doi.org/10.36073/1512-0996-2023-2-47-54.
Texto completoResumen
Madneuli copper enrichment plant works since 1975. This plant works on copper sulphide ores from Madneuli and Sakdrisi deposits. In some ores due to difficulties of blotting secondary copper sulphides, recovery of copper in commercial production is low – 60-65%. At the same time, concentration of copper in tails is 0.17-0.19% and concentration of gold in tails 0.3-0.6 gr/t. In this article we consider combine technology of processing rich flotation tiles: preinrichment by gravity (use centrifugal concentrator and/or short noise hydrocyclone). Gravity concentrate with au and cu 5.47 gr/t, and 0.93%, respectively proceed hydrometallurgicaly (cyanidation) this technology makes possible rise recovery of gold and copper in commercial product by 20-25% and 17-20%.
25
Ranjbar, M., M. Schaffie, Mohammad Pazouki, R. Ghazi, A. Akbary, S. Zanddevakili, S. A. Seied Baghery y Z. Manafi. "Application Potential of Biohydrometallurgy in the Iranian Mining Industry". Advanced Materials Research 20-21 (julio de 2007): 38–41. http://dx.doi.org/10.4028/www.scientific.net/amr.20-21.38.
Texto completoResumen
Several studies and different successful commercial applications had demonstrated that bioleaching can be an innovative approach that is capable to provide mining industry opportunities for essential growth in the medium term[2-18]. To identify the commercial application potential of bioleaching in Iranian copper industry, a research program was initiated. The objective of the main part of this program was to evaluate bacterial leaching processes for copper recovery from (i) high grade ores and flotation concentrates and (ii) low grade ores and flotation tailings. The latest results of these studies indicates the general operability of the bioleaching in both cases. At optimum conditions, the copper extraction from low grade materials was more than 80% and that from high grade ores and flotation concentrates about 95%, which should be high enough to justify the process economically.
26
Liang, Yi Li, Hua Qun Yin, Yun Hua Xiao, Min Tang, Xue Feng, Zhi Yong Xie, Guan Zhou Qiu y Xue Duan Liu. "Microbial Leaching of Copper from Tailings of Low Grade Sulphide Ores in Zambia". Advanced Materials Research 1130 (noviembre de 2015): 473–76. http://dx.doi.org/10.4028/www.scientific.net/amr.1130.473.
Texto completoResumen
Demand for copper is growing in the world,which makes it increasingly necessary to process low-grade ores and tailings that used to be considered as wastes. The development and application of bioleaching by acidophilic chemolithotrophic microorganisms, which obtain energy from the oxidation of sulfide minerals and use carbon dioxide for constructive metabolism, has been a major approach for processing the low-grade copper ores. In this study, mixed culture consisted of six iron and sulfur oxidizing microorganisms were used in leaching of flotation and acid-leaching tailings obtained from Zambia sulfide ores. The result showed that 62.7% and 61.7% copper were dissolved by bioleaching, while 53.8% and 57.4% by acid leaching in flotation and acid leaching tailings, respectively. In addition, mineralogical forms of copper were quite noteworthy since copper sulfide mineral extraction was significantly improved in bioleaching. XRD analysis showed wollastonite and diopside in acid tailing were undetectable after 23 days while others were difficult to be dissolved. No jarosite or sulphur was detected by XRD in residues.
27
Tanaka, Yoshiyuki, Hajime Miki, Gde Suyantara, Yuji Aoki y Tsuyoshi Hirajima. "Mineralogical Prediction on the Flotation Behavior of Copper and Molybdenum Minerals from Blended Cu–Mo Ores in Seawater". Minerals 11, n.º 8 (11 de agosto de 2021): 869. http://dx.doi.org/10.3390/min11080869.
Texto completoResumen
The copper ore in Chilean copper porphyry deposits is often associated with molybdenum minerals. This copper–molybdenum (Cu–Mo) sulfide ore is generally mined from various locations in the mining site; thus, the mineral composition, oxidation degree, mineral particle size, and grade vary. Therefore, in the mining operation, it is common to blend the ores mined from various spots and then process them using flotation. In this study, the floatability of five types of Cu–Mo ores and the blending of these ores in seawater was investigated. The oxidation degree of these Cu–Mo ores was evaluated, and the correlation between flotation recovery and oxidation degree is presented. Furthermore, the flotation kinetics of each Cu–Mo ore were calculated based on a mineralogical analysis using mineral liberation analysis (MLA). A mineralogical prediction model was proposed to estimate the flotation behavior of blended Cu–Mo ore as a function of the flotation behavior of each Cu–Mo ore. The flotation results show that the recovery of copper and molybdenum decreased with the increasing copper oxidization degree. In addition, the recovery of blended ore can be predicted via the flotation rate equation, using the maximum recovery (Rmax) and flotation rate coefficient (k) determined from the flotation rate analysis of each ore before blending. It was found that Rmax and k of the respective minerals slightly decreased with increasing the degree of copper oxidation. Moreover, Rmax varied greatly depending on the mineral species. The total copper and molybdenum recovery were strongly affected by the degree of copper oxidation as the mineral fraction in the ore varied greatly depending upon the degree of oxidation.
28
Díaz, José, Jennyfer Serrano y Eduardo Leiva. "Bioleaching of Arsenic-Bearing Copper Ores". Minerals 8, n.º 5 (17 de mayo de 2018): 215. http://dx.doi.org/10.3390/min8050215.
Texto completo
29
Sayitov, Sardor S., Vladimir D. Tsoi, Shohruh M. ugli Rasulov, Ruslan D. Pechersky, Alina V. Rasulova, Azimjon К. ugli Abduvaitov y Azamat А. ugli Asrorov. "Material composition of copper slag of the Almalyk copper-smelting plant (Uzbekistan)". Bulletin of the Tomsk Polytechnic University Geo Assets Engineering 335, n.º 4 (25 de abril de 2024): 148–58. http://dx.doi.org/10.18799/24131830/2024/4/4292.
Texto completoResumen
Relevance. Copper production is accompanied by release of a large volume of slag. Today, huge quantities of copper slags have accumulated all over the world, in which the copper content is even greater than that in original ores. The slags that result from the smelting of ores and concentrates of both ferrous and non-ferrous metals, together with other metallurgical wastes such as tailings, are increasingly the subject of significant environmental controversy. The only way to reduce the negative impact of slag waste on the environment can be their disposal, by complex extraction of valuable components from them and further use of slag waste for construction purposes. In addition to the main component of copper, copper slags contain elevated contents of gold, silver, zinc, iron, etc. The form of finding valuable metals such as iron, copper, lead and zinc in copper slags is complex. A detailed study of the mineral composition of slags is used in development of an effective technology for processing slags. Aim. To study mineral composition of copper slags, the form of finding valuable components. Object. Copper slag waste from the copper-smelting plant of the Almalyk MMC. Methods. Chemical composition of copper slags was established by phase analysis, atomic absorption, X-ray fluorescence research methods. Mineral composition of the ores was established as a result of complex studies, including: optical microscopy in transmitted and reflected light, X-ray diffraction, microprobe studies and electron microscopy. Results. Copper content in composition of copper slag samples is higher than in copper ores and it is 0.77–0.97%. In addition to copper, copper slags contain elevated contents of a complex of metals (g/t): Au – 0.17–0.26; Ag 8.42–10.64, Zn 4.288–10216, Pb – 2014-3360. Ferrous silicates (fayalite, ferrosillite), vitreous mass of ferruginous-silicate composition predominate in the composition of copper slags. Ore minerals are mainly represented by magnetite. The mineral content is approximately 10–15%. Among сopper sulfides minerals bornite, chalcocite, less often cubanite, chalcopyrite, covellite sharply predominate. Cuprite is observed in small amounts, and native copper is metallic. The mineral form of finding molybdenum is molybdenite. Among the native silver minerals, native silver was found in association with lead minerals. Gold is included in the composition of native copper and chalcocite as an impurity and passes into copper concentrate during processing slags.
30
KOZHONOV, Almaz, Valentin CHANTURIA, Kulgamal NOGAEVA y Yessil ALPIEV. "Technological basis of processing skarn copper-gold-bearing ores of the Kyrgyz Republic". Sustainable Development of Mountain Territories 15, n.º 3 (30 de septiembre de 2023): 693–706. http://dx.doi.org/10.21177/1998-4502-2023-15-3-693-706.
Texto completoResumen
Introduction. The paper studies the matters of processing of skarn copper-gold ores from a deposit in the Kyrgyz Republic. Materials and methods. As a study task, the authors performed an analysis of the material composition, including micro- and macroscopic types of analyses are presented. Results. Textural-structural analysis and mineralogical characteristics of the main ore minerals is detailed. The characteristic features of the material composition of the studied types of ores are highlighted and described. The reagent suite for processing of skarn ores has been established by means of additional feed of weakly selective depressants (Na2SiO3) and effective flotation reagents to the process, the introduction of which can significantly improve the concentrate quality. The study direction is also supplemented by the consideration and introduction of the process of mechanical activation into the process flow diagram as a reserve in increasing the grade of metals in the concentrate through the mechanical liberation of minerals by ultrafine grinding. The forms of metal loss with concentrating tailings, which are represented by wollastonite, garnet (andradite) and pyroxenes, clay-micaceous minerals, feldspars, and talc are determined. Discussion. The main losses of sulphide copper are associated with the presence of intergrowths of copper minerals with barren minerals in the samples. When evaluating copper minerals in tailings, copper is present in sulphide minerals – 79.2% and 20.8% rel. belongs to the oxide minerals. Conclusion. The paper summarizes the results of the study with the developed closed flotation flowsheet for the processing of copper-gold skarn ores, which makes it possible to obtain the flotation concentrate with grade of Cu – 25.01%, Au – 55.02g/t, Ag – 401g/t, with recovery into concentrate of Cu – 84.65%, Au – 87.94%, Ag – 89.44%. Concentrate output 2.33%. The implementation of the proposed flowsheet will ensure the achievement of planned production performance in the processing of skarn ores. Resume. At the end of the study work, the authors issued recommendations on adjusting the reagent suite with the inclusion of the weakly selective depressant – liquid glass (Na2SiO3), introducing the process of attritioning the feed of the cleaning operation (ultrafine regrinding) and considering the regularity of the phase composition of the copper minerals of skarn ore from the copper grade, providing the initial grade of copper at 0.9-1.0% in the processed ore by blending the ore feed ore to the concentrator. Suggestions for practical application and direction for future research. The materials of the paper can be useful for mining and processing enterprises when processing skarn copper-gold ores.
31
Kamradt, Andreas, Juliane Schaefer, Axel Schippers y Sabrina Hedrich. "Comparative Bioleaching and Mineralogical Characterization of Black Shale-Hosted Ores and Corresponding Flotation Concentrates". Solid State Phenomena 262 (agosto de 2017): 139–42. http://dx.doi.org/10.4028/www.scientific.net/ssp.262.139.
Texto completoResumen
In this study, two black shale copper ores from different Mid-European Kupferschiefer-type deposits and their flotation concentrates were used for bioleaching tests. All samples were subjected to stirred tank bioleaching using an acidophilic, moderately thermophilic microbial consortium. The distribution of sulfides and gangue minerals in the ores, copper concentrates and residues of both, bioleaching and sterile chemical control tests were investigated using EDX-based particle analysis. The black shale ores and the extracted copper concentrates varied in their mineralogical composition with respect to the distribution of sulfides and gangue. While the copper-bearing sulfides in the Sangerhausen black shale and concentrate were dominated by bornite and chalcopyrite, the Rudna black shale and its flotation concentrate were rich in chalcocite and bornite. Differences in the portion of gangue minerals were detected in particular for carbonates that represented the dominant mineral group in the Rudna black shale and its copper concentrate. Distinct Cu dissolution kinetics and recovery rates of Co and other associated metals were observed for the various materials processed by bioleaching. Copper sulfides were completely dissolved also in both black shale ores. However, the sulfide distribution in the bioleaching residues of the Sangerhausen concentrate revealed that a significant portion of chalcopyrite was not leached. Even higher recovery rates for copper and other metals were determined for the bioleaching tests on the Rudna concentrate, in which copper sulfides were nearly completely dissolved. Alteration of copper sulfides and the formation of calcium sulfate were in particular observed in the sterile control residue of the Rudna concentrate, due to excessively use of sulfuric acid for pH stabilization. Lead sulfate precipitates increasingly occurred in the bioleaching residues, but represented also a common secondary phase in the sterile leaching residues.
32
NAKAMURA, Hidekatsu, Muneyuki TAMURA, Tadashi CHIDA y Naoki SATO. "Acceleration of Copper Leaching of Secondary Copper Sulfide Ores". Journal of MMIJ 126, n.º 6 (2010): 184–89. http://dx.doi.org/10.2473/journalofmmij.126.184.
Texto completo
33
Liu, Dian Wen, Jian Jun Fang, Xiao Lin Zhang, Shu Ming Wen, Zhi Cong Wei, Shao Jun Bai, Bing Liang Xu y Wen Bin Zhang. "Sulfidisation Promotion Effect of Ammonium Sulfate on Flotation of Copper Oxide Ore". Advanced Materials Research 524-527 (mayo de 2012): 1109–14. http://dx.doi.org/10.4028/www.scientific.net/amr.524-527.1109.
Texto completoResumen
This paper presents the sulfidisation promotion effect of ammonium sulfate on the sulfidisation flotation of both malachite and copper oxide ores. Copper oxide ores are commonly difficult-to-float due to its molecular structure, and adding sodium sulfide as activator is necessary; however, its dosage to the flotation pulp must be strictly controlled, as it is also a powerful depressant for copper sulfide minerals, and will, if in excess, depress the activated copper oxide minerals. This depression will be alleviated while ammonium sulfate is added, as it accelerates the speed of sulfidisation, and alleviates excessive sulfide ions on the depression of copper oxide minerals. Ammonium sulfate, therefore, may be a sulfidisation promoter, and plays a role of sulfidisation promotion effect; it makes the coating of sodium sulfide on the ore surface more dense and stable, which is ready for xanthate adsorption on the surface of copper oxide minerals. The results of experiments show that the flotation recovery is increased 12.28% while ammonium sulfate is added in the presence of excessive sodium sulfide in the pulp, and the highest recovery is obtainable when the ammonium sulfate and sodium sulfide are in the same dosages. The sulfidisation promotion effect of ammonium sulfate is confirmed by pure copper oxide mineral flotation test and copper oxide ores flotation test, as well as by SEM images of floated malachite.
34
Xiong, Fei, Yan Jun Li, Zheng Zhang, Guo Fang Du y Yao Zhong Lan. "Application of Chelating Collectors in the Flotation of Copper Minerals". Advanced Materials Research 868 (diciembre de 2013): 417–22. http://dx.doi.org/10.4028/www.scientific.net/amr.868.417.
Texto completoResumen
The application of new chelating reagents on the flotation of copper minerals has been paid much attention in recent years. These collectors have successfully extracted the copper minerals from the low-grade refractory ores, and one of the most important collectors is the alkylhydroxamate-based chelating reagent which shows the excellent flotation performance to the copper oxide minerals. Furthermore, the mixture of various chelating reagents can recover the copper sulfides and oxides simultaneously from the complicated copper ores, which is attributed to the synergy among collectors. Thus we conclude that it is an important flotation method by using chelating collectors in conjunction with other traditional collectors, by which the synergy can break through the limitation of single reagent and enhance the flotation efficiency.
35
Konareva, Tatiana y Maxim Kirilchuk. "Research of combined reagent schemes of activation leaching of gold from oxidized ores of the Malmyzh field". E3S Web of Conferences 192 (2020): 02020. http://dx.doi.org/10.1051/e3sconf/202019202020.
Texto completoResumen
The results of studies of the cyanide and an alternative methods for leaching gold and silver from oxidized ores of the Malmyzh field are presented. The possibility of recovering gold and silver from oxidized porphyry copper ores by thiosulfate solutions in agitation and percolation modes without intensifying the process – heating the solutions and adding copper ions – has been shown. Also, in a separate cycle – copper leaching with low-concentration sulfuric acid-sulfite solutions with additional opening of the silicate matrix with ammonium hydrofluoride – has been studied. The possibility of using ammonia-thiosulfate leaching in percolation mode has been investigated.
36
Medyanik, Nadezhda L., Anton P. Ponomarev y Olga V. Yershova. "The Chemical Technology for Producing Precious Metals from Enrichment Rejects of Copper-Pyrite Ores". Solid State Phenomena 316 (abril de 2021): 625–30. http://dx.doi.org/10.4028/www.scientific.net/ssp.316.625.
Texto completoResumen
The chemical technology for recovery precious metals Au and Ag from mature flotation tailings of copper-pyrite ores by two-stage sintering with chlorine-ammonium reagents and leaching of bakes with water is developed. The chemical extraction of gold and silver is carried out, using NH4Cl and NH4NO3 reagents in the ratios of 1:1 at a temperature of 250 °C, and 2:1 at 200 °C. In accordance with the obtained results, a chemical technology of enrichment rejects of copper-pyrite ores processing and a scheme of primary apparatus chain for implementing this technology are proposed. The economic effect of the technology realization is calculated. This effect is 96.3 million rubles with a payback period of 8 years when processing enrichment rejects of copper-pyrite ores in amount of 109.5 thousand tons per year under the conditions of JSC “Uchaly Mining and Metallurgical Combine”.
37
Li, Guo Dong, Li Kun Gao, Hui Xin Dai y Hai Fang Dong. "Study on Application of Intensifying Depression Talcum in the Copper Sulphide Flotation". Applied Mechanics and Materials 295-298 (febrero de 2013): 3043–49. http://dx.doi.org/10.4028/www.scientific.net/amm.295-298.3043.
Texto completoResumen
Talcum is a common gangue with which sulphide ores are associated, it has an adverse impact on sulphide ores flotation and product index due to its high natural floatability. In this paper it takes talcum-bearing copper sulphide ores from DongChuan in Yunnan province as experimental samples, and a series of tests on depressing talcum in the copper suphide ore flotation were carried out. Results show that when took the composed CMC and sodium hexametaphosphate as depressant with respective dosage 200g/t and 300g/t, it obtained a favourableeffect. In addition, depression effect can get improved with the dosage of collector increasing properly, it shows that when took the composed CMC and sodium hexametaphosphate as depressant, it can make the flotation process stable.It employed rougher-scavenger-three cleaners system as the closed-circuit flowsheet, and attained a Cu concentrate product of whom grade and recovery is 16.16%, 78.78% respectively.The results might contribute to dispose some similar talcum-bearing sulphide ores in the future.
38
Li, Xiaohua, Wouter Monnens, Zheng Li, Jan Fransaer y Koen Binnemans. "Solvometallurgical process for extraction of copper from chalcopyrite and other sulfidic ore minerals". Green Chemistry 22, n.º 2 (2020): 417–26. http://dx.doi.org/10.1039/c9gc02983d.
Texto completo
39
Liu, Zhengyu, Jue Kou, Lipeng Fan, Weibin Zhang, Jie Tian, Chunbao Sun, Qiang Li, Jiubo Liu, Chengjun Xing y Guanhua Li. "Research on Enhancing Copper-Ammonia-Thiosulfate Eco-Friendly Gold Leaching by Magnetization of Lixiviant Solution and Their Kinetic Mechanism". Minerals 14, n.º 7 (8 de julio de 2024): 697. http://dx.doi.org/10.3390/min14070697.
Texto completoResumen
In thiosulfate leaching of gold, the copper-ammonia complex serves as an oxidant and catalyst. This study examined the impact of magnetizing the copper-ammonia thiosulphate lixiviant solution on gold leaching from refractory oxidized ores. Magnetization reduced surface tension, improved wettability and infiltration, and enhanced the diffusion of leaching agents. It also increased dissolved oxygen content and boosted the catalytic efficiency of copper-ammonia complexes. These changes led to more efficient gold extraction, with column leaching showing a 4.74% improvement in extraction rates compared to non-magnetized methods and a 3.67% improvement over cyanide processes. These findings suggest that magnetized copper-ammonia thiosulphate lixiviant is a promising, environmentally friendly alternative to cyanide for refractory oxidized gold ores.
40
Szubert, Agnieszka, Anne-Gwénaëlle Guezennec, Françoise Bodénan, Stefan Dirlich, Agnieszka Pawłowska, Andrzej Grotowski, Zygmunt Sadowski y Kajetan Witecki. "An update on possibilities of metals recovery from Polish copper ores by biotechnology. Project Ecometals". E3S Web of Conferences 18 (2017): 01015. http://dx.doi.org/10.1051/e3sconf/20171801015.
Texto completoResumen
The possibilities of metals recovery from copper ores with the biotechnological methods are widely known. The methods consist in bioleaching of copper ores, copper concentrates and byproducts of their production, as well as metals recovery from leaching solutions. Biohydrometallurgical methods were tested for years to be applied at KGHM Polska Miedź S.A., in order to improve efficiency of copper production. Several different research units worked on the topic, and the most significant and wide range initiatives in this area are mentioned in this article. One of the initiatives is an ongoing German and French Ecometals project. KGHM Polska Miedź S.A. and KGHM Cuprum Ltd. Research and Development Centre are this project Partners. In the frame of the project different metals bearing materials (ores, concentrates and tailings) are tested. Among them three lithological types of the copper ore from Rudna mine and the copper concentrate from Lubin concentrator are used for studies. The article gives a general overview of these activities, with the main focus on results of bioleaching studies of selected materials, conducted by KGHM Cuprum. In these studies sandstone and shale, as well as so called “shale concentrate” (containing 39% of the shale) were used for experiments, and possibilities of their bioleaching were evaluated.
41
Aikawa, Kosei, Mayumi Ito, Nodoka Orii, Sanghee Jeon, Ilhwan Park, Kazutoshi Haga, Taro Kamiya et al. "Flotation of Copper Ores with High Cu/Zn Ratio: Effects of Pyrite on Cu/Zn Separation and an Efficient Method to Enhance Sphalerite Depression". Minerals 12, n.º 9 (30 de agosto de 2022): 1103. http://dx.doi.org/10.3390/min12091103.
Texto completoResumen
Porphyry copper deposits are important sources of copper and typically processed by flotation to produce copper concentrates. As mining areas become deeper, the amounts of impurities, such as sphalerite, can be increased in copper ores, so the appropriate depression of sphalerite floatability should be achieved to obtain saleable copper concentrates. In this study, the flotation behaviors of chalcopyrite and sphalerite in model samples mimicking copper ores with high Cu/Zn ratios (i.e., the ratio of chalcopyrite/sphalerite = 13:1) were investigated with zinc sulfate as a depressant for sphalerite. In addition, the effect of pyrite—a major gangue mineral in copper ores—on the depression of sphalerite floatability with zinc sulfate was examined. When sphalerite and chalcopyrite coexisted, the floatability of the former was effectively depressed by zinc sulfate (Zn recovery: <12%), whereas the presence of pyrite promoted the release of Cu2+ due to the galvanic interaction with chalcopyrite, which resulted in the elimination of the effectiveness of zinc sulfate in depressing sphalerite floatability (Zn recovery: >90%). Despite the presence of much higher amounts of chalcopyrite and pyrite than sphalerite, the application of nitrogen (N2) gas limiting the galvanic interaction between pyrite and chalcopyrite by reducing the dissolved oxygen (DO) concentration in the system effectively depressed the floatability of sphalerite (Zn recovery: <30%).
42
Ngom, Baba, Yili Liang y Xueduan Liu. "Cross-Comparison of Leaching Strains Isolated from Two Different Regions: Chambishi and Dexing Copper Mines". BioMed Research International 2014 (2014): 1–11. http://dx.doi.org/10.1155/2014/787034.
Texto completoResumen
A cross-comparison of six strains isolated from two different regions, Chambishi copper mine (Zambia, Africa) and Dexing copper mine (China, Asia), was conducted to study the leaching efficiency of low grade copper ores. The strains belong to the three major species often encountered in bioleaching of copper sulfide ores under mesophilic conditions:Acidithiobacillus ferrooxidans,Acidithiobacillus thiooxidans, andLeptospirillum ferriphilum. Prior to their study in bioleaching, the different strains were characterized and compared at physiological level. The results revealed that, except for copper tolerance, strains within species presented almost similar physiological traits with slight advantages of Chambishi strains. However, in terms of leaching efficiency, native strains always achieved higher cell density and greater iron and copper extraction rates than the foreign microorganisms. In addition, microbial community analysis revealed that the different mixed cultures shared almost the same profile, andAt. ferrooxidansstrains always outcompeted the other strains.
43
Murzin, V. V., G. A. Palyanova, E. V. Anikina y V. P. Moloshag. "Mineralogy of noble metals (Au, Ag, Pd, Pt) in Volkovskoe Cu-Fe-Ti-V deposit (Middle Urals, Russia)". LITHOSPHERE (Russia) 21, n.º 5 (31 de octubre de 2021): 653–59. http://dx.doi.org/10.24930/1681-9004-2021-21-5-643-659.
Texto completoResumen
Research subject. The mineral compositions of titanomagnetitic (apatite, titanomagnetite) and copper-titanomagnetitic (bornite, chalcopyrite, apatite, titanomagnetite) ores of the Volkovskoe Cu-Fe-Ti-V deposit (Middle Urals, Russia).Methods. The research was carried out using a Jeol JSM-6390LV scanning electron microscope and X-ray spectral microanalyzers JXA-5 (Jeol) at the Geoanalitik Collective Use Center of the IGG UB RAS. Results and conclusions.Native gold (with ≤ 0.3 wt % Pd, 0.2–0.4 wt % Cu; fneness 800–914 ‰), tellurides of Pd, Au and Ag (merenskyite, keithconnite, sylvanite, hessite) and Pt arsenide (sperrylite) were found in the copper-titanomagnetitic ores. For the frst time, two generations of native gold (fneness 1000 and 850–860 ‰) and palladium telluride (keithconnite Pd3-xTe) were detected in titanomagnetitic ores. The sequence of ore mineral formation and the features of their genesis were revealed. Native gold (fneness 1000‰) in the form of microinclusions in titanomagnetite was attributed to the magmatic stage. Noble metal minerals, intergrown with copper sulfdes (bornite, chalcopyrite, digenite) and associated with late hydroxyl-bearing minerals (amphibole, epidote, chlorite), are superimposed in relation to the magmatic minerals (pyroxene, plagioclase, hornblende, apatite, titanomagnetite, ilmenite, etc.) of these ores. Merenskyite, sperrylite, high fneness gold (800–914 ‰), as well as carrolite, cobaltite, copper-cobalt telluride and bismuth tellurium-selenide kawazulite Вi2Te2Se are syngenetic with copper sulfdes. The Au-Ag tellurides were deposited later than these minerals. It is shown that the high fugacity of tellurium, which binds Pd, Au, and Ag into tellurides, prevents the occurrence of native gold containing high concentrations of palladium and silver.
44
Grigoriev, S. A. "Development of metallurgy of copper and copper alloys in China in the 2nd millennium BC". VESTNIK ARHEOLOGII, ANTROPOLOGII I ETNOGRAFII, n.º 2(57) (15 de junio de 2022): 31–43. http://dx.doi.org/10.20874/2071-0437-2022-57-2-3.
Texto completoResumen
The first rare metal finds in China are dated to the Neolithic period, but most of them belong to its final phase. For this period, pure copper is known, very rare arsenic alloys, probably smelted from ore with arsenic admixtures. At the beginning of the 2nd millennium BC, in Gansu, the technology of smelting ore with the following alloying with arsenic, occasionally tin minerals were borrowed from an unknown source. This technology spread to the east, and is present in the Erlitou II layer. At the beginning of the Erlitou III phase (which corresponds to the beginning of the Shang dynasty), the tradition of the Seima-Turbino metallurgy and the technology of smelting copper sulfide ores and alloying with tin penetrated into the Yellow River basin from the north (through Shanxi) from southern Siberia. This tradition soon spread to southern China, as well as the western and northern peri-phery of Chinese civilization. The penetration of the Karasuk tradition of arsenic alloys is also observed in the west and north in the late Shang period, and the Shang and Karasuk metallurgical traditions coexisted there. A special situation formed in Xinjiang, where the Andronovo tradition of smelting sulfide ores and tin alloys pene-trated, but this penetration was limited to the west of the region. It did not affect the development of Chinese me-tallurgy. In general, in China, there is the same correspondence between the types of used ores and alloys as in the rest of Eurasia: native copper and malachite — pure copper, oxidized ores and secondary sulfides with gangue — arsenic copper, occasionally tin bronze, copper-iron sulfides — tin bronze. But in China, this sequence was driven by two technological impulses at the beginning of the 2nd millennium BC (from an unclear source) and at the end of the second half of the 2nd millennium BC from southern Siberia. In addition, during the late Shang period, the interaction of the Shang and Karasuk traditions occurred in the north and west.
45
Abbas Jasim, Sundus, Sajad Abd Al-kadhum Mohsin y Maithem Ammory Jaafer. "Production of Copper Powder from Ores by Elecrodeposition Process". Journal of University of Babylon for Engineering Sciences 27, n.º 2 (10 de junio de 2019): 233–41. http://dx.doi.org/10.29196/jubes.v27i2.2342.
Texto completoResumen
This paper studies the preparation of Copper powder from copper sulphate aqueous solution (CuSO4.5H2O), sulfuric acid (H2SO4) and copper chloride (CuCl2.2H2O) by using the process of electrodeposition. Process of Powder deposition has been investigated for copper powder; it is a fine layer on cathode electrode by using the value of different from time of deposition (15, 30, 45, and 60) min. it is noticed the weight of the powder rises with the rise of time of depostion.
Diffractions of X-ray (XRD) revealed high crystallinity and pure copper powder not contain impurity or oxides. Optical microscopes have revealed the particles of copper have dendritic shapes. The size of Particles analyzer measured the size of a particle which is about (4.645) μm.
46
Karimova, F. B., D. I. Jumaniyazov y A. V. Tevelev. "Potential ore possibility of rocks of the deposit Kalmakyr of Almalyk district (Middle Tien-Shan)". Moscow University Bulletin. Series 4. Geology, n.º 2 (7 de junio de 2023): 60–65. http://dx.doi.org/10.55959/msu0579-9406-4-2023-63-2-60-65.
Texto completoResumen
The article presents the mineralogical and geochemical features of the types and grades of ores of the porphyry copper deposit Kalmakyr. The chemical, mass spectrometric results of analyzes of selected samples are given. When describing polished sections, ore minerals and their structural and textural features were established. The polyformation and potential ore content of the rocks of the deep horizons of the Kalmakyr deposit was revealed. It has been determined that the change of copper mineralization with depth to copper-molybdenum is due to the change of diorite by monzonitoids. Gold and silver ores appear to be superimposed, young, and associated with basic-felsic dykes.
47
Kyaw, Zay Ya, Kyaw Kyaw Phyo, A. B. Kopylov y R. A. Kovalev. "IMPROVEMENT OF REAGENT REGIMES OF FLOTATION OF SPHALERITE AND PYRITE FROM SILVER COPPER-ZINC AND POLYMETALLIC ORE DEPOSITS". News of the Tula state university. Sciences of Earth 4, n.º 1 (2021): 374–88. http://dx.doi.org/10.46689/2218-5194-2021-4-1-374-388.
Texto completoResumen
Pyrite copper-zinc (sulfide) and polymetallic ores in Russia are complex and refracto-ry mineral raw materials. The main processing technology for such ores is flotation. Currently, the improvement of the flotation technology of such mineral raw materials is carried out in several directions. It has been established by the practice of enrichment of copper-zinc ores that obtaining high-quality zinc and pyrite concentrates is impossible without the use of various modifiers in the practice of flotation of sphalerite and pyrite. Such reagents are copper (II), zinc and iron (II) sulfates in an alkaline lime environment. Therefore, studies were carried out to float sphalerite and pyrite in an alkaline lime medium with the addition of one of the indicat-ed sulfates to the mineral flotation operation. The effect of each of the sulfates of copper (II), zinc and iron (II) on the flotation of sphalerite and pyrite was studied during flotation of the mineral with butyl xanthate and dithiophosphate at pH = 8, 10, and 12. The aim of this work was to study the effect of sulfhydryl collectors in the presence of copper sulfates , zinc and iron for flotation of sphalerite and pyrite with a size class (-0.074 + 0.044 mm) from one of the Rus-sian deposits.
48
Kyaw, Z. Y., Z. A. Tiagalieva, Z. O. Htet y K. K. Phyo. "Improvement of reagent flotation modes of sphalerite and pyrite from deposits of copper-zinc pyrite, polymetallic copper-zinc pyrite and polymetallic ores". IOP Conference Series: Earth and Environmental Science 942, n.º 1 (1 de noviembre de 2021): 012004. http://dx.doi.org/10.1088/1755-1315/942/1/012004.
Texto completoResumen
Abstract Copper-zinc pyrite (Sulphide) and polymetallic ores of Russia are complex and difficult to process mineral raw materials. The main technology for the enrichment of this ores are flotation. Currently, the improvement of the flotation technology of this mineral raw materials is carried out in several way. It has been established by the practice of beneficiation of copper-zinc ores that obtaining high-quality zinc and pyrite concentrates is impossible without adding flotation modifiers of sphalerite and pyrite to various flotation operations. This reagent are copper (II) sulfates, zinc and iron (II) sulfates in an alkaline calcareous medium. Therefore, studies on the flotation of sphalerite and pyrite in an alkaline calcareous medium with the addition of one of these metal sulfates to the mineral flotation operation were performed. The effect of each copper (II) sulfates zinc, and iron (II) on the flotability of sphalerite and pyrite was studied during flotation of the mineral and xanthate and dithiophosphate at pH = 8, 10, and 12. The aim of this work was to study the effect of the flotation size class (- 0.074 + 0.044 mm) sphalerite and pyrite of one of the Russian deposits by sulfhydryl collectors in the presence of copper, zinc and iron sulfates in the liquid phase of flotation pulp
49
Klochko, Viktor I., Vjacheslav I. Manichev, Galina S. Kompanec y Miron S. Kovalchuk. "Wychodnie rud miedzi na terenie ukrainy zachodniej jako baza surowcowa metalurgii kolorowej w okresie funkcjonowania kultury trypolskiej". Folia Praehistorica Posnaniensia 10 (1 de noviembre de 2018): 47–77. http://dx.doi.org/10.14746/fpp.2003.10.03.
Texto completoResumen
The article presents a study of copper ore from western Ukraine aimed at explanation of possibilities of their exploitation for the color metallurgy development during the period of Tripolye culture. It gives a short characteristics of lithological, mineralogical, and geochemical composition of copper ores from the Dneper area, Volhynia, and the Carpathians plateau. It further presents results of chemical and spectral analysis of ore-bearing rocks, evaluation of its current state and potential possibilities of their use in the past. Based upon a statement that metal objects produced during the existence of the Tripolye culture were made of pure copper two methods of its procurement were considered: (a) from a virgin copper, and (b) from oxygenated copper ore of sedimentary origin in which a small number of admixtures was noticed. The paper shows the potential of studies aimed at explanation of the correlation between contemporary and past copper ores and some copper goods from archaeological sites of the Tarnopol region.
50
Sekisov, Artur y Slava Korolev. "Prospects for using combined (traditional and physical-chemical) mining technologies in the development of large gold-copper ore deposits". E3S Web of Conferences 192 (2020): 02001. http://dx.doi.org/10.1051/e3sconf/202019202001.
Texto completoResumen
The article deals with the problems of development of large gold-copper ore deposits, which have prospects for the development of mining and processing complexes based on them, which produce refined metals as final products. The article substantiates the feasibility of using combined traditional and physical-chemical geotechnologies in the development of these deposits, including geotechnologies in mining, using innovative processes of activation of heap and underground leaching of copper, fine and dispersed gold from complex ores. At the initial stage of development of the large deposits of complex ores, in parallel with traditional schemes open-pit mining and ore processing at the processing plant, it is advisable to use the activation heap leaching of valuable components from poor and refractory ores and flotation tailings from ordinary and rich ore. At the second stage, when switching to the underground method of field development, it is proposed to use blockhole leaching with explosion-injection ore preparation with combination with it. The proposed schemes for combined development of complex gold-copper ore and copper-ore deposits with precious metal mineralization are based on data obtained during many years of experimental research and pilot tests.