Bibliografías temáticas / Connectio

Índice

Artículos de revistas
Tesis
Libros
Capítulos de libros
Actas de conferencias
Informes

Literatura académica sobre el tema "Connectio"

Autor: Grafiati

Publicado: 4 de junio de 2021

Última modificación: 1 de febrero de 2022

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Connectio".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Artículos de revistas sobre el tema "Connectio"

Lee, Sang-Sup, Keum-Sung Park, Ju-Seong Jung y Kang-Seok Lee. "Evaluation of the Structural Performance of a Novel Methodology for Connecting Modular Units Using Straight and Cross-Shaped Connector Plates in Modular Buildings". Applied Sciences 10, n.º 22 (19 de noviembre de 2020): 8186. http://dx.doi.org/10.3390/app10228186.

Texto completo

Resumen

The strength capacity of modular buildings is determined by the weakest part, and connections between modular units are often weaker than the modular units themselves. Thus, to verify the safety of modular structures, the structural performance of connections between modular units should be evaluated; the practical suitability of connection methods under a range of construction conditions should also be determined. In conventional modular building structures, modular units are generally connected using bolts between connector plates, interlocking devices, or steel plate welding. However, current methods are not technically or practically suitable for all types of modular buildings, such as high-rise modular buildings. Here, we describe a novel technology for connecting modular units to ensure the safety of modular structures. In this study, straight and cross-shaped metal connectors that use rectangular tubular columns and channel beams were proposed for connecting modules. Their structural performance was evaluated through cyclic loading tests by controlling the story drift angle in the width and longitudinal directions. The experimental results demonstrated that all specimens exhibited relatively stable behavior up to a drift angle of 0.04 rad, and there was a superior response in terms of energy absorption capability in the longitudinal direction results compared to the width direction. However, in comparison to the cross-shaped connector plate, the stiffness of the straight connector plate decreased as the drift angle of the column increased.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Lee, Mi-Ran. "A Study on the Countermeasure of the Integrated Care Network for the Elderly to Promote Community Cooperation and Connectio". Asia-pacific Journal of Convergent Research Interchange 5, n.º 1 (31 de marzo de 2019): 65–75. http://dx.doi.org/10.21742/apjcri.2019.03.07.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Hiemstra, P. H., N. Fujiwara, F. M. Selten y J. Kurths. "Complete synchronization of chaotic atmospheric models by connecting only a subset of state space". Nonlinear Processes in Geophysics 19, n.º 6 (12 de noviembre de 2012): 611–21. http://dx.doi.org/10.5194/npg-19-611-2012.

Texto completo

Resumen

Abstract. Connected chaotic systems can, under some circumstances, synchronize their states with an exchange of matter and energy between the systems. This is the case for toy models like the Lorenz 63, and more complex models. In this study we perform synchronization experiments with two connected quasi-geostrophic (QG) models of the atmosphere with 1449 degrees of freedom. The purpose is to determine whether connecting only a subset of the model state space can still lead to complete synchronization (CS). In addition, we evaluated whether empirical orthogonal functions (EOF) form efficient basis functions for synchronization in order to limit the number of connections. In this paper, we show that only the intermediate spectral wavenumbers (5–12) need to be connected in order to achieve CS. In addition, the minimum connection timescale needed for CS is 7.3 days. Both the connection subset and the connection timescale, or strength, are consistent with the time and spatial scales of the baroclinic instabilities in the model. This is in line with the fact that the baroclinic instabilities are the largest source of divergence between the two connected models. Using the Lorenz 63 model, we show that EOFs are nearly optimal basis functions for synchronization. The QG model results show that the minimum number of EOFs that need to be connected for CS is a factor of three smaller than when connecting the original state variables.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Jiang, Baolong, Shuyan Ji, Yingmin Li, Pu Yang, Yangyang Tang y Zhikun Chen. "DESIGN AND ANALYSIS OF CONNECTION TYPES FOR ULTRA-HIGH-RISE TWIN-TOWER STRUCTURE LEARNING". NED University Journal of Research 3, Special Issue on First SACEE'19 (12 de diciembre de 2019): 191–98. http://dx.doi.org/10.35453/nedjr-stmech-2019-0039.

Texto completo

Resumen

One of key issues of designing connected structure is the design of the connecting body between towers. This paper presents the analysis of different connecting body design schemes based on a 202.15 m (663 ft) twin-tower ultra-high-rise structure connected by a connecting truss. The influence of height and type of connection on the entire building structure was studied by comparing storey shear forces and drift of structure. The results indicated that the connection type between the connecting body and main structure has little influence on the building structure performance. Finite element analysis of the connecting body indicated that the internal force characteristic of rigid connection type is better compared to the hinge connection type. Furthermore, the connecting truss design based on inclined braces connected by hinge joint is superior compared to the rigid joints.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Lee, Myung Jae. "Improvement of Shear Connection Design Procedure using Connections Standardization Database". Journal of Korean Society of Steel Construction 26, n.º 2 (2014): 81. http://dx.doi.org/10.7781/kjoss.2014.26.2.081.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Song, Guo Hua, Dong Wei Wang y Bing Kang Liu. "Study on Seismic Behavior of Vertical Connection in Prefabricated Reinforced Concrete Structures". Advanced Materials Research 250-253 (mayo de 2011): 1385–94. http://dx.doi.org/10.4028/www.scientific.net/amr.250-253.1385.

Texto completo

Resumen

The paper attempts to research the seismic behavior and mechanical mechanisms under repeated low-cycle loading of vertical connections in prefabricated reinforced concrete structures. Eighteen specimens were designed and tested, the test process and the mechanical mechanisms are studied, the seismic behavior of connections is analyzed, and the shear resistance formulas are proposed. The theoretical values based on proposed formulas are good agreement with test results. Under repeated loading, the shear resistance decreases, the connection ductility increases with connecting bar, but decreases with connection width. However, all the connections fail crisply with poor ductility. At sudden-cracking, the shear resistance increases with connecting bar, but changes nonlinearly with connection width. The resistance is composed of attributions of mechanism of diagonal-compressive column (MDCC) and mechanism of compressive friction action (MCFA). After sudden-cracking, the shear resistance is provided by weakened MDCC and dowel action of connecting bars (DACB). It increases with connecting bar and connection width.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Xie, Jin Fa y Yan Qiang Cheng. "A Kind of Swinging Bumper in the Rear of a Truck and its Performance Research". Applied Mechanics and Materials 578-579 (julio de 2014): 736–40. http://dx.doi.org/10.4028/www.scientific.net/amm.578-579.736.

Texto completo

Resumen

Using three-dimensional modeling software to design a kind of swinging rear underrun protective device, using the Ansys finite element analysis software, in accordance with the provisions of GB11567.2-2001, the rear underrun protective device applied static load analysis. The results show that the protective device and the body in the welding and bolt connecting two different cases, connected by bolts can effectively avoid the connection of stress concentration, and support as the main part of the force. But by welding, the connections exist obvious stress concentration, may to cause the protective frame dropping.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Kuklík, Petr, Anna Kuklíková y Anna Gregorová. "Timber-Concrete Composite Structures with Semi-Rigid Connections". Key Engineering Materials 677 (enero de 2016): 282–87. http://dx.doi.org/10.4028/www.scientific.net/kem.677.282.

Texto completo

Resumen

This paper deals with behavior of timber-concrete composite structures with mechanical connection systems. The paper is focused to two different connection systems: using dowel-type fasteners and using special surface connector. Behavior of dowel-type connection system is based on modification of Johansen ́s equations valid for timber to timber connections. Behavior of connection system with special surface connector is evaluated by experiments and numerical simulations.

Los estilos APA, Harvard, Vancouver, ISO, etc.

O.Y., Hilodo, Arsiriy A.M., Korshak О.М., Kovtun V.P. y Kitaiev A.A. "TEST OF A NET DOME FRAGMENT". Modern structures of metal and wood, n.º 25 (agosto de 2021): 21–26. http://dx.doi.org/10.31650/2707-3068-2021-25-21-26.

Texto completo

Resumen

A geodesic or net dome, also known as a Fuller’s dome, is a spherical structure. Geodesic domes are well receptive to asymmetric loads, especially snow and wind, have high aerodynamics, increased rigidity and stability. It should be noted that the larger the diameter of the sphere, the greater its bearing capacity, and the strength of such dome slightly depends on the building materials used. With significant advantages, the design and construction of wooden net domes has not become widespread. The fact is that net domes are spatial structures with a large number of elements, which accordingly entails a large number of nodes. The elements of the dome are connected with dowels, wet film gauge, bolts, wood screws, staples, screws, nails. Adhesive connections on washers are used, also steel clamps, straps, overlays are applied. However, they all have disadvantages, the scope of each connector is different, and their cost is often comparable to the cost of the dome elements. We offer a universal connector for connecting dome parts at any angle. As a result of introduction of such technical decision of knot, we receive essential simplification of a design, reduction of quantity of components, at the same time with increase of its manufacturability. To study the operation of the joint of wooden glue-board elements of the dome with the use of a universal connector, its experimental studies were carried out. The purpose of the study: to study the actual operation of the connection of wooden parts of the dome with a universal connector in the form of rotating fasteners that rotate freely on the draw bolt, to assess its strength and deformability, to assess the possibility of using such a connection in the design of spatial structures. To solve the tasks, a full-scale fragment of the dome was tested, which includes characteristic nodes with rigid adjacency of elements to each other.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Peleshchak, R. М., V. V. Lytvyn, О. І. Cherniak, І. R. Peleshchak y М. V. Doroshenko. "STOCHASTIC PSEUDOSPIN NEURAL NETWORK WITH TRIDIAGONAL SYNAPTIC CONNECTIONS". Radio Electronics, Computer Science, Control, n.º 2 (7 de julio de 2021): 114–22. http://dx.doi.org/10.15588/1607-3274-2021-2-12.

Texto completo

Resumen

Context. To reduce the computational resource time in the problems of diagnosing and recognizing distorted images based on a fully connected stochastic pseudospin neural network, it becomes necessary to thin out synaptic connections between neurons, which is solved using the method of diagonalizing the matrix of synaptic connections without losing interaction between all neurons in the network. Objective. To create an architecture of a stochastic pseudo-spin neural network with diagonal synaptic connections without loosing the interaction between all the neurons in the layer to reduce its learning time. Method. The paper uses the Hausholder method, the method of compressing input images based on the diagonalization of the matrix of synaptic connections and the computer mathematics system MATLAB for converting a fully connected neural network into a tridiagonal form with hidden synaptic connections between all neurons. Results. We developed a model of a stochastic neural network architecture with sparse renormalized synaptic connections that take into account deleted synaptic connections. Based on the transformation of the synaptic connection matrix of a fully connected neural network into a Hessenberg matrix with tridiagonal synaptic connections, we proposed a renormalized local Hebb rule. Using the computer mathematics system “WolframMathematica 11.3”, we calculated, as a function of the number of neurons N, the relative tuning time of synaptic connections (per iteration) in a stochastic pseudospin neural network with a tridiagonal connection Matrix, relative to the tuning time of synaptic connections (per iteration) in a fully connected synaptic neural network. Conclusions. We found that with an increase in the number of neurons, the tuning time of synaptic connections (per iteration) in a stochastic pseudospin neural network with a tridiagonal connection Matrix, relative to the tuning time of synaptic connections (per iteration) in a fully connected synaptic neural network, decreases according to a hyperbolic law. Depending on the direction of pseudospin neurons, we proposed a classification of a renormalized neural network with a ferromagnetic structure, an antiferromagnetic structure, and a dipole glass.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Más fuentes

Tesis sobre el tema "Connectio"

au, louiseduxbury@westnet com y Marie-Louise Duxbury. "Implementing a relational worldview: Watershed Torbay, Western Australia connecting community and place". Murdoch University, 2007. http://wwwlib.murdoch.edu.au/adt/browse/view/adt-MU20080617.132132.

Texto completo

Resumen

The Australian landcare movement is considered to be a major success, with an extensive community landcare network developed, raised levels and depth of awareness, and a range of demonstration projects undertaken. It has inspired people across Australia and has been emulated overseas. However, negative trends in environmental conditions continue unabated. If the approach of the Australian landcare movement to date has not addressed the current unsustainable farming practices, what approach will? This Australian study explores the history of the mechanistic worldview, its influence on the attitudes to and treatment of landscapes and indigenous knowledge from colonisation, and the ongoing impacts on current social and natural rural landscapes. Increasing tension between the mechanistic worldview and the growing landcare ethic based on relationships is apparent. Through the focus project, Watershed Torbay, a different way of seeing and treating the world is explored by praxis. A worldview based on relationships and connection as the end purpose is proffered. Strengthening connection with ones own moral framework, and relationships with people and place in community, are seen as the path to achieving sustainability based on ecological and values rationality. It is recognised that there are multiple ways of seeing and experiencing the world, and it is important to give voice to all players with a connection to decision making. This also means that there are different forms of knowledge; these can be grouped under the typology of epistemic or scientific knowledge, techne or technical/practical capability, and the central form of knowledge about values and interests. I have worked with the focus project as a reflective practitioner undertaking action research; this is evident in the movement between theory and practice through the thesis. The thesis concludes in praxis taking the learning from the focus project, and exploration of theory, to answer the question posed at the outset by outlining how the relational worldview can be applied to the regional bodies now delivering major landcare programs.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Anderson, Joanna M., Deborah Parrott y Renee Lyons. "Making the Connection: Connecting Children to Books through Multimedia". Digital Commons @ East Tennessee State University, 2013. https://dc.etsu.edu/etsu-works/396.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Sekely, Kelly H. "Connecting One and Many - Reinventing the Procession of the Cinema Experience". VCU Scholars Compass, 2011. http://scholarscompass.vcu.edu/etd/2413.

Texto completo

Resumen

In the past, going to the movies was an event. The grand lit marquee made a statement, ushering you inside. The elaborately decorated lobby transported you to a place in your dreams where riches and opulence abound. The curtained screen marked the start of a true storied spectacle as you sat close to your friends and neighbors dressed in their Sunday best. There was no denying that the cinema was the place to see, be seen and to socialize. In contrast, today’s movie-going can be classified as more of a singular experience. You wait in long, solemn cattle lines to enter a cluttered lobby with loud video games, tacky candy machines and tunnel-like hallways. You sit in plush recliners in a sea of strangers and rush out of the theater before even the lights come up. In response to this cultural shift, my proposed design solution will challenge the isolation of today’s cinema by recreating the procession associated with neighborhood movie-going of the early 1900s. I will reinvent a cinema built in 1937, the Bellevue Theater, and develop a design that is contemporary, incorporating both modern technology and interests of today. The design will explore the spatial connections between one and many, fostering both the individual and group experience associated with the big screen – the cinema procession of the past.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Kariyannavar, Kiran. "Connecting the human body - Models, Connections and Competition". Thesis, Linköpings universitet, Elektroniksystem, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-78009.

Texto completo

Resumen

Capacitive communication using human body as a electrical channel has attracted much attention in the area of personal area networks (PANs) since its introduction by Zimmerman in 1995. The reason being that the personal information and communication appliances are becoming an integral part of our daily lives. The advancement in technology is also helping a great deal in making them interesting,useful and very much affordable. If we interconnect these body-based devices with capacitive communication approach in a manner appropriate to the power, size, cost and functionality, it lessens the burden of supporting a communication channel by existing wired and wireless technologies. More than that, using body as physical communication channel for a PAN device compared to traditional radio transmission seems to have a lot of inherent advantages in terms of power and security etc. But still a lot of feasibility and reliability issues have to be addressed before it is ready for prime time. This promising technology is recently sub-classified into body area networks (BAN) and is currently under discussion in the IEEE 802.15.6 Task Group for addressing the technical requirements to unleash its full potential for BANs. This could play a part in Ericsson's envision of 50 billion connections by 2020. This thesis work is part of the main project to investigate the models, interface and derive requirements on the analog-front-end (AFE) required for the system. Also to suggest a first order model of the AFE that suits this communication system.In this thesis work the human body is modeled along with interfaces and transceiver to reflect the true condition of the system functioning. Various requirements like sensitivity, dynamic range, noise figure and signal-to-noise ratio (SNR) requirements are derived based on the system model. An AFE model based on discrete components is simulated, which was later used for proof of concept. Also a first order AFE model is developed based on the requirements derived. The AFE model is simulated under the assumed interference and noise conditions. The first order requirements for the submodules of the AFE are also derived. Future work and challenges are discussed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Tanguturi, Sai Kishan. "Effect on Contact Resistance dueto Cross Connection of MC4 Compatible Connector". Thesis, Högskolan Dalarna, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:du-28838.

Texto completo

Resumen

Electrical connectors are the blocks that connect solar panels together. Whenever a photovoltaic plant commences, the main discussion goes around on solar panels, inverters, charge controllers, etc. But the topic of connectors is usually hardly discussed. Connectors in a photovoltaic system can definitely contribute to improve the overall performance of the system, provided that importance is given while selecting the connectors. The electrical connectors used in photovoltaic systems can be connected in two possible ways. Connectors can be connected either in a pure-connection or in a cross-connection. Male and female connectors from the same brand results a pure-connection (P-C). Male and female connectors from two different brands results in a cross-connection (C-C). There have been discussions in photovoltaic, electrical connector markets and international solar events regarding the risks involved, losses and consequences due to a cross-connection. The main reason behind cross-connections is the unawareness of the installers in knowing the difference between a pure-connection and a cross-connection. Even though the installers are aware of this difference, they are not aware of the consequences of cross-connections. Multi-Contact, a leading electrical connector manufacturer of MC4 photovoltaic connectors affected by the counterfeit products of MC4, due to the sudden boom in the solar market during 2011-12. With the help of TÜV Rheinland, Multi-Contact conducted couple of tests namely temperature increase test and accelerated stress tests to understand the disadvantages of cross-connections. This thesis tried to replicate the tests performed by Multi-Contact in an attempt to understand the test results by using connectors that are used in the Swedish market. Performing temperature increase test and accelerated stress tests on most commonly used connectors in the Swedish market is the main aim of this thesis. The first test, gives an understanding of the temperature variations across various connector sets (four connector sets from various manufacturers used in this thesis) and the latter tests helps to understand the quality of the contact resistance of these connector sets. The four connector set manufacturers used in this test were Multi-Contact (MC), Weidmüller (WM), Blussun solar (BSS) and PBM. The quality of contact resistance of a connector is directly related to the quality of the connector set. During the 20 minutes of the temperature increase test, the connector set from WM performed better than its competitors in the P-C. Whereas, the MC-BSS connector set had performed well in the C-C. The connector type of male MC and female BSS showed its dominance throughout the test. Unfortunately, no conclusions were able to be drawn from this test results due to insufficient information about the test procedure. From the results of accelerated stress tests, the C-C set from MC outperformed its P-C counterpart. All ten connector sets used in this project passed the standard and qualified as connectors with good quality contact resistance. Therefore the best results out of only a P-C connector set does not seems to be completely true. With the standard used in this thesis, it is quite difficult to judge the quality of connectors. Rather than saying a P-C is superior and a C-C is inferior in terms of quality, there is a need to come up with a new method to evaluate the quality of connectors. Matching the connectors based on their tolerances could be a potential solution to the mismatching problem in connectors.

Los estilos APA, Harvard, Vancouver, ISO, etc.

MUELLER, ANGELA MARIE. "CONNECTION BETWEEN SIMPLE SPAN PRECAST CONCRETE GIRDERS MADE CONTINUOUS-MODIFIED CONNECTIONS". University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1021907161.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

DIMMERLING, AMY JO. "CONNECTION BETWEEN SIMPLE SPAN PRECAST CONCRETE GIRDERS MADE CONTINUOUS-EMBEDDED CONNECTIONS". University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1022153268.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Martin, Brandi Nichole. "A comparison of double clip angle shear connections to shear tab connections in industrial applications". Kansas State University, 2017. http://hdl.handle.net/2097/35552.

Texto completo

Resumen

Master of Science
Department of Architectural Engineering
Kimberly W. Kramer
In structural steel connection design, simple shear connections are one of the most common connection types utilized. The industry, especially from the side of the engineer, tends to lean toward using Double Clip Angle Connections as the default standard for simple shear connections. A double clip angle connection is a connection consisting of two angles transferring the shear forces from one member to the next either through bolts or welds. The design of Double Clip Angle Connections is efficient and the connections themselves are easy to fabricate. However, benefits to utilizing other types of shear connections exist. Many of these benefits are seen in the fabrication shop or during erection and construction. This is especially true of single shear plate or shear tab connections when applied to open structure design. Shear tab connections consist of a single plate that transfers the shear forces from one member to the next with bolts or with welds. The design of shear tab connections can be a more involved process than the design of double clip angles. Sometimes the shear plate or shear tab has to be longer than is typical. This is called an extended shear plate connection. These extended shear plates can bring other variables into the design that typically don’t occur with Double Clip Angle Connections such as bending of the plate or the need for multiple bolt columns. However, with proper planning and detailing, the benefits and savings experienced in the fabrication or construction phase may outweigh what can be seen as a more laborious design task. The purpose of this report is to identify the possible benefits achieved in using each of these connections, highlight the differences in the design approach for each, and use a study model to compare the outcome of using one connection over another in the design of a typical open structure. Double clip angles are typically the most efficient approach when speed of design and simplicity of fabrication are the desired outcomes. However, shear plate or shear tab connections have the potential to provide safer erection alternatives and materials savings if used in appropriate ways and with the right applications.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Griffin, David. "A connected and connecting church, will the Internet help us?" Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0019/MQ49177.pdf.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Ekama, Peter J. "A House that Connects: enriching life through connection to inhabitant and site". University of Cincinnati / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1277135199.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Más fuentes

Libros sobre el tema "Connectio"

Robin, Mason, ed. The connecticon: Learning for the connected generation. Greenwich, Conn: Information Age Pub., 2004.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

1965-, Mitrea Dorina, ed. Calculus connections: Connecting middle school and college mathematics (CM)². Upper Saddle River, N.J: Pearson Education, 2007.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Connecting middle school and college mathematics (CM)²: Algebra connections. Upper Saddle River, N.J: Pearson Prentice Hall, 2005.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Chui, Alan. Connection. Dublin: University College Dublin, 2002.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Freund, Roland W. A biconjugate gradient type algorithm on massively parallel architectures. [Moffett Field, Calif.]: Research Institute for Advanced Computer Science, NASA Ames Research Center, 1991.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Hoefel, Roseanne L. Connecting the French connection: Emily Dickinson and Virginia Woolf writing the (female) body. Ann Arbor, Michigan: UMI, 1990.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Trepp, Gian. Swiss Connection. Zurich, Switzerland: Unionsverlag, 1996.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Ledwidge, Michael. Bad connection. New York: Pocket Books, 2001.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Lorraine connection. London: Arcadia Books, 2009.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Number Connection (Number Connections). Heinemann Educational Books - Primary Division, 1998.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Más fuentes

Capítulos de libros sobre el tema "Connectio"

Telle, Jan Arne y Yngve Villanger. "Connecting Terminals and 2-Disjoint Connected Subgraphs". En Graph-Theoretic Concepts in Computer Science, 418–28. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-45043-3_36.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Carroll, Noel, Marie Travers y Ita Richardson. "Connecting Multistakeholder Analysis Across Connected Health Solutions". En Biomedical Engineering Systems and Technologies, 319–39. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-54717-6_18.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Simpson, Anna. "Connection". En The Innovation-Friendly Organization, 149–78. London: Palgrave Macmillan UK, 2017. http://dx.doi.org/10.1057/978-1-137-48302-7_6.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Barber, Sarah. "Connection". En The Disputatious Caribbean, 83–117. New York: Palgrave Macmillan US, 2014. http://dx.doi.org/10.1057/9781137480019_4.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Smith, J. Goosby y Josie Bell Lindsay. "Connection". En Beyond Inclusion, 33–49. New York: Palgrave Macmillan US, 2014. http://dx.doi.org/10.1057/9781137385420_4.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Elnikety, Sameh. "Connection". En Encyclopedia of Database Systems, 581–82. New York, NY: Springer New York, 2018. http://dx.doi.org/10.1007/978-1-4614-8265-9_666.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Kalmar, Jayne M., Brigid M. Lynch, Christine M. Friedenreich, Lee W. Jones, A. N. Bosch, Alessandro Blandino, Elisabetta Toso et al. "Connectin". En Encyclopedia of Exercise Medicine in Health and Disease, 208. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-540-29807-6_4133.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Kinley, Nik y Shlomo Ben-Hur. "Connection". En Leadership OS, 245–57. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-27293-7_16.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Mercado, Gustavo. "connection". En The Filmmaker's Eye: The Language of the Lens, 64–65. London; New York: Routledge, 2019.: Routledge, 2019. http://dx.doi.org/10.4324/9780429446894-10.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Talen, Emily y Sungduck Lee. "Connection". En Design for Social Diversity, 125–46. Second edition. | New York: Routledge, 2017.: Routledge, 2018. http://dx.doi.org/10.4324/9781315442846-9.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Actas de conferencias sobre el tema "Connectio"

Nordahl, Håvard, Martin Rindarøy, Stian Skjong, Lars T. Kyllingstad, Dirk Walther y Tore Brekke. "An Ontology-Based Approach for Simplified FMU Variable Connections With Automatic Verification of Semantically Correct Configuration". En ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/omae2020-18135.

Texto completo

Resumen

Abstract Simulation is increasingly used as an engineering tool in the maritime industry. Currently, there is a particular focus on digital twins, where a supplier of equipment should also supply a simulation model of the equipment. Today, the person configuring the simulator must manually connect all required signals between these models, interpreting the meaning of each signal name to determine which signal can be connected together (e.g., connecting “pressure out” to “pressure in”, while ensuring that their units match). This is a tedious and error-prone process. In this paper, we present a method for automatically connecting variables of different models while complying with the FMI standard in co-simulations. This also includes a method for unit conversions. The methods for both automatic connections and unit conversions are based on ontologies. The key idea is to build an ontology, based on existing ontologies, which enables structuring model input and output variables into groups and hierarchies, and assign them a defined type. This enables reasoning about connections between models, and simplifies the model connections. The focus in this paper is to present the ontology, how FMI interface signals can be connected to the ontology, and how this can be used to simplify model connections.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Vasdravellis, George y Eliza Feidaki. "Horizontal push out tests on a steel-yielding demountable shear connector". En 12th international conference on ‘Advances in Steel-Concrete Composite Structures’ - ASCCS 2018. Valencia: Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/asccs2018.2018.7073.

Texto completo

Resumen

The most common type of a steel concrete composite beam is the one using conventional welded headed studs to connect the top flange of a steel beam to the concrete slab. However, the monolithic structure between the headed studs and the concrete slab prevents the deconstruction of the beam. More sustainable solutions in construction can be achieved by developing demountable connections which allow for fully deconstruction and reuse of all structural systems. This paper presents a novel demountable shear connector for use in steel concrete composite beams in conjunction with precast hollow core slab units. The demountable connection proposed has the advantages of minimal use of in situ concrete required only in specific regions, increased ductility due to the unique shape of the shear connector and since it is not embedded in in situ concrete, it facilitates the deconstruction procedure. Ten horizontal push out tests aiming at investigating the structural performance of the demountable shear connector were carried out. The strength of the connection is predicted using simple mechanics based on plastic beam analysis. The experimental results showed that the proposed demountable shear connector can achieve increased strength depending on the geometric characteristics of the connector, a ductile slip-load curve and a very high slip capacity.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Skoglind, Brian, Travis Roberts, Sourabh Karmakar, Cameron Turner y Laine Mears. "Localized Acoustic-Event Measurement Probe: Connector Confirmation Utilizing Acoustic Signatures". En ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8446.

Texto completo

Resumen

Abstract Electrical connections in consumer products are typically made manually rather than through automated assembly systems due to the high variety of connector types and connector positions, and the soft flexible nature of their structures. Manual connections are prone to failure through missed or improper connections in the assembly process and can lead to unexpected downtime and expensive rework. Past approaches for registering connection success such as vision verification or Augmented Reality have shown limited ability to verify correct connection state. However, the feasibility of an acoustic-based verification system for electrical connector confirmation has not been extensively researched. One of the major problems preventing acoustic based verification in a manufacturing or assembly environment is the typically low signal to noise ratio (SNR) between the sound of an electrical connection and the diverse soundscape of the plant. In this study, a physical means of background noise mitigation and signature amplification are investigated in order to increase the SNR between the electrical connection and the plant soundscape in order to improve detection. The concept is that an increase in the SNR will lead to an improvement in the accuracy and robustness of an acoustic event detection and classification system. Digital filtering has been used in the past to deal with low SNRs, however, it runs the risk of filtering out potential important features for classification. A sensor platform is designed to filter out and reduce background noise from the plant without effecting the raw acoustic signal of the electrical connection, and an automated detection algorithm is presented. The solution is over 75% effective at detecting and classifying connections.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Gao, Bingjun, Bin Liu, Junhua Dong y JinHua Shi. "Application of Sub-Modeling in the Finite Element Analysis of a Large Fixed Tubesheet Heat Exchanger". En ASME 2017 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/pvp2017-65287.

Texto completo

Resumen

There are enormous tubes in large fixed tubesheet heat exchangers making it difficult to model all the tubes and tubesheet connections in detail for a finite element (FE) analysis. Alternatively, an equivalent solid plate with various simplified tube connections are employed in the FE modeling. But this fails to yield an accurate stress field around the connecting region of tubes and the tubesheet. Given that the maximum stress of the equivalent solid plate generally occurs adjacent to the solid tubesheet, a novel finite element modeling methodology is proposed in this paper. A two part process is used. The first part is a coarse FE model and the second part is a more detailed FE model. In the coarse FE model, the equivalent solid plate is employed in the central region of the tubesheet with simplified tube connections such as equivalent cylinder by multi-points contacting. And quasi detailed tube and tubesheet connections are used in the coarse FE model for the region adjacent to the solid plate, in which the tube and the tubesheet are simply connected with same nodes. This means that both tubesheet and tubes are established in this quasi detailed FE modeling region. Although both the weld and contacting condition between the tube and the tubesheet are not included, the coarse model is enough to yield a believable stress field for the determination of the maximum stress point of the quasi detailed FE modeling region. In the second part, the sub-model methodology is utilized in the predetermined maximum stress point, in which the detailed connecting structure of the tube and the tubesheet is included, such as the weld and the contact condition. The proposed modeling methodology is helpful to have an insight into the stress around the connecting region of the tube and tubesheet for the effective evaluation of the tubesheet and the connection.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Pourmohamadian, Neema, Mike L. Philpott y Mark A. Shannon. "Novel Connections for Non-Metallic, Flexible, Thin, Microchannel Heat Exchangers". En ASME 2004 2nd International Conference on Microchannels and Minichannels. ASMEDC, 2004. http://dx.doi.org/10.1115/icmm2004-2439.

Texto completo

Resumen

Non-metallic, flexible, thin, microchannel heat exchangers made from heat-sealable polyimide films have recently been developed for refrigeration and air-conditioning applications. In order for these heat exchangers to function properly and independently, robust and reliable connectors are needed. The connectors must be easy to manufacture and assemble, hold high pressures without leaking, and have the ability to connect to standard tubing and piping and different heat exchangers together in series and parallel. Three uniquely different connector designs have been developed, manufactured, and tested. The first includes a machined metal connector internally embedded within the heat exchanger that is capable of holding pressures up to 1.03 MPa. The second connector design includes a two-piece polymer assembly containing an O-ring used to seal around the inlet and outlet holes of the heat exchanger. The design incorporates a 10-degree wedge that creates the sealing force when fully assembled with the heat exchanger and has been pressure tested to 2.07 MPa without leaking. A variation of the design allows multiple heat exchangers to connect in series and in parallel. Finally, the third design contains no additional parts and connects two heat exchangers together by thermally bonding the inlet of one heat exchanger to the outlet of another. The thermally bonded connection was able to hold pressures greater than 2.07 MPa.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Magomedov, D. M. "Compound sentences with connecting unions in Dagestan languages". En SCIENCE OF RUSSIA: GOALS AND OBJECTIVES. L-Journal, 2020. http://dx.doi.org/10.18411/sr-10-12-2020-20.

Texto completo

Resumen

The semantic connection between the parts of a complex sentence is determined by the unions by which they are connected. In the Dagestan languages, there are three types of creative conjunctions: connecting, separating, adversary. Parts of compound sentences are equal. The union is not included in any of the predicative parts. Compound sentences, parts of which are connected by connecting unions, can convey different semantic meanings between parts, namely: simultaneity, sequence of actions, as well as the meanings of cause and effect. Such proposals are very common in Dagestani.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Ikegami, Kunihiro, Martin Baba y Tomohiro Yamasaki. "Response Characteristics of the Floating Water Purifier “Water Beetle” in Waves". En ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2011. http://dx.doi.org/10.1115/omae2011-49963.

Texto completo

Resumen

In closed water areas such as reservoirs and ponds, the water quality is prone to deteriorate when water flowing into the area is polluted and over-rich in nutrients. This causes algae to increase. The Water Beetle is a floating water purification unit on new principle to have the high performance with small energy. When the Water Beetle is used in a water area of complicated shape, plural miniaturized units are arranged to adjust the shape of area and connected to each other by use of mechanical connecting devices. To design the mechanical connecting device, it is necessary to grasp the exact response characteristics of the Water Beetle connected to each other in waves. A model basin test was conducted for the Water Beetle connected to each other in waves. In the model basin test, three floating unit models of the Water Beetle were connected by mechanical connecting devices that were simplified. The test was carried out to vary the connecting mechanism at connecting points. The measured results were compared with the calculated results obtained by use of the calculation method for motion analysis of multiple bodies connected to each other in waves, and they were compared between various connecting conditions to evaluate the most suitable connecting condition. As the result, the characteristics of response of the Water Beetle connected to each other in waves were obtained experimentally and theoretically, and the most suitable connection mechanism of connecting device was able to be decided. Therefore, the realization of the multi-connected Water Beetle system was confirmed experimentally.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Kubota, Osamu, Akira Maki y Tomomichi Uegata. "The Application of Noise Analysis to Find the Miss-Connected LPRM Cables Before Plant Startup". En 17th International Conference on Nuclear Engineering. ASMEDC, 2009. http://dx.doi.org/10.1115/icone17-75795.

Texto completo

Resumen

The miss-connected LPRM (Local Power Range Monitor) cables were occasionally found at the BWRs (Boiling Water Reactors) in Japan. These miss-connections were confirmed by visual inspection after the plant shutdown. In 2007, we proposed a method to find the miss-connection by applying noise analysis to LPRM signal data during plant operation. Actually, in 2008, the miss-connection was found by the method during plant operation at a BWR in Japan. It showed the effectiveness of the method. However, it should be more convenient and helpful, if the miss-connection could be found before the plant startup. A new method is proposed here to find the miss-connections before plant startup, that is, before the primary containment vessel is closed after plant startup preparation.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Stephens, Michael John, Simon John Roberts y Derek James Bennet. "A Validated Methodology to Establish Structural Capacities for Subsea Connector Families". En SPE Offshore Europe Conference & Exhibition. SPE, 2021. http://dx.doi.org/10.2118/205412-ms.

Texto completo

Resumen

Abstract Understanding the structural limits of subsea connectors used in offshore environments is critical to ensure safe operations. The latest industry standards establish the requirement for physical testing to validate analysis methodologies for connector designs. In this paper, an analysis methodology, compliant with the latest API 17G standard, is presented for calculating structural capacities of non-preloaded connectors. The methodology has been developed for complex combined loading scenarios and validated using full-scale physical testing for different connector families. Detailed 3-D, non-linear, finite element models were developed for three different non-preloaded connections, which consisted of threaded and load shoulder connectors. A comprehensive set of combined tension and bending moment structural capacities at normal, extreme and survival conditions were calculated for each connection. The calculated capacities were validated for each connection by performing a test sequence using full-scale structural testing. A final tension or bending to failure test was also completed for each test connection to validate the physical failure mode, exceeding the latest API 17G requirements. For all connections tested, capacities calculated using the methodology were validated from the successful completion of the test sequences. The physical failure modes of the test connections also matched the predicted failure modes from the FEA, and the tensile or bending moment loading at physical collapse exceeded that predicted by the global collapse of the FEA model. Using the validated approach described in this paper significantly reduces the requirement of physical testing for connector families, establishing confidence in the structural limits that are critical for safe operations.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Tang, Elaine, Reza H. Khiabani, Christopher M. Haggerty y Ajit P. Yoganathan. "In Vitro Investigation of the Effect of Flow Pulsatility on Power Loss in the Total Cavopulmonary Connection". En ASME 2011 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2011. http://dx.doi.org/10.1115/sbc2011-54020.

Texto completo

Resumen

Total Cavopulmonary Connection (TCPC) is the most common surgical palliation for single ventricle heart defects. In such connections, venae cavae are connected to the pulmonary arteries, bypassing the right ventricle. The patient-specific anatomical complexity makes characterization and optimization of the fluid mechanics a unique challenge.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Informes sobre el tema "Connectio"

Vera-Cossio, Diego A. Research Insights: Do Better-Connected Community Members Benefit More from Subsidized Credit? Inter-American Development Bank, agosto de 2021. http://dx.doi.org/10.18235/0003594.

Texto completo

Resumen

More powerful and less productive households, both in terms of wealth and connections, ended up obtaining more credit from a community-based lending program. Informal markets partially attenuated these targeting distortions by redirecting credit from connected to unconnected households, albeit at higher rates. Despite the targeting distortions, a community-based approach may still be more appealing than other centralized criteria to target credit. Eliminating the connection-based advantage may lead to village-level gains in terms of equity and output.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Akcigit, Ufuk, Salomé Baslandze y Francesca Lotti. Connecting to Power: Political Connections, Innovation, and Firm Dynamics. Cambridge, MA: National Bureau of Economic Research, octubre de 2018. http://dx.doi.org/10.3386/w25136.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Sturzenegger, Germán, Cecilia Vidal y Sebastián Martínez. The Last Mile Challenge of Sewage Services in Latin America and the Caribbean. Editado por Anastasiya Yarygina. Inter-American Development Bank, noviembre de 2020. http://dx.doi.org/10.18235/0002878.

Texto completo

Resumen

Access to piped sewage in Latin America and the Caribbean (LAC) cities has been on the rise in recent decades. Yet achieving high rates of end-user connection between dwellings and sewage pipelines remains a challenge for water and sanitation utilities. Governments throughout the region are investing millions in increasing access to sewage services but are failing in the last mile. When households do not connect to the sewage system, the full health and social benefits of sanitation investments fail to accrue, and utilities can face lost revenue and higher operating costs. Barriers to connect are diverse, including low willingness to pay for connection costs and/or the associated tariffs, liquidity and credit constrains to cover the cost of upgrades or repairs, information gaps on the benefits of connecting, behavioral obstacles, and collective action failures. In contexts of weak regulation and strong social pressure, utilities typically lack the ability to enforce connection through fines and legal action. This paper explores the scope of the connectivity problem, identifies potential connection barriers, and discusses policy solutions. A research agenda is proposed in support of evidence-based interventions that have the potential to achieve higher effective sanitation coverage more rapidly and cost-effectively in LAC. This research agenda must focus on: i) quantifying the scope of the problem; ii) understanding the barriers that trigger it; and iii) identifying the most cost-effective policy and market-based solutions.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Chen, Zixuan, Jun Dong, Mengling Wang, Yang Peng y Yuner Huang. NON-LINEAR FINITE ELEMENT ANALYSIS OF STAINLESS STEEL SLIP-RESISTANT CONNECTIONS WITH PARTICLES EMBEDDED IN CONNECTED PLATES. The Hong Kong Institute of Steel Construction, diciembre de 2018. http://dx.doi.org/10.18057/icass2018.p.131.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Soltis, Lawrence A. y Thomas Lee Wilkinson. Bolted-connection design. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 1987. http://dx.doi.org/10.2737/fpl-gtr-54.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Stanton, John F., Richard G. Anderson, Charles W. Dolan y David E. McCleary. Moment Resistant Connections and Simple Connections. Precast/Prestressed Concrete Institute, 1986. http://dx.doi.org/10.15554/pci.rr.conn-008.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Bergen, Benjamin Karl. FleCSI: Connection to Legion. Office of Scientific and Technical Information (OSTI), agosto de 2016. http://dx.doi.org/10.2172/1296696.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Williams, N. IPsec Channels: Connection Latching. RFC Editor, octubre de 2009. http://dx.doi.org/10.17487/rfc5660.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Peter Hayes, PhD. Regional Grid Connection Project. Office of Scientific and Technical Information (OSTI), noviembre de 2003. http://dx.doi.org/10.2172/819439.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Patton, B. Switchyard Enclosure Bolted Connection Calculations. Office of Scientific and Technical Information (OSTI), septiembre de 2001. http://dx.doi.org/10.2172/15005722.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!