Artículos de revistas: "Computer Aided Technologies"

1

Menshutina, Natalia V. y Tadeusz Kudra. "COMPUTER AIDED DRYING TECHNOLOGIES". Drying Technology 19, n.º 8 (31 de agosto de 2001): 1825–49. http://dx.doi.org/10.1081/drt-100107275.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Popov, Stepan Alexandrovich. "The Importance of Computer Aided Technologies and Brand Promotion in Dress Design". Revista Gestão Inovação e Tecnologias 11, n.º 2 (5 de junio de 2021): 1243–52. http://dx.doi.org/10.47059/revistageintec.v11i2.1752.

Texto completo

Resumen

This article discusses the importance of computer aided technologies and brand promotion in dress design. The subject of research is computer aided technologies in dress design. The research topic involves interrelations between fine arts and computer aided technologies, which should be considered as the basis of brand promotion in dress design. The research is aimed at revealing necessity of computer aided technologies as an inherent attribute in design. The research hypothesis assumes that interrelation between computer aided technologies and design is highly relevant and required at present. The integrated approach used for considering designer activity in connection with realities of technological progress, as well as the system approach used for revealing the interrelation between the theory of fashion industry and the designing practice, and stylistic and technological analysis were applied in the work. The techniques of dress design using professional computer graphics were described. The research results eliminate drawbacks in model development regarding creative dress design concept and visual presentation of collection for consumers. The relevance of computer aided technologies for modern design assumes various opportunities of application of these tools both in teaching professional disciplines and in creation of dress design. Development of computer aided technologies allows designing models by computer graphics, which assists development of fashion industry and education in total.

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Kolbasin, Alexander y Oksana Husu. "Computer-aided design and Computer-aided engineering". MATEC Web of Conferences 170 (2018): 01115. http://dx.doi.org/10.1051/matecconf/201817001115.

Texto completo

Resumen

In modern industrial production some of the major factors of successful development include: cost reduction of the production, im-provement of its quality, as well as help to minimise the time in market en-try. Computer-aided design and Computer-aided engineering (CAD / CAE - systems) are the most effective for implementation of these requirements. Possible use of this engineering modeling simulation in conjunction with the power and speed of high performance computing could reduce costs and time of each cycle of designing, and also significantly reduce devel-opment time. The introduction of new technologies, the use of high quality products and engagement of qualified personnel would allow businesses and organizations to get on a path of innovative development of design and production systems.

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Alizoti, Alion. "Computer – Aided RGB analyses of images". Technium Romanian Journal of Applied Sciences and Technology 3, n.º 8 (28 de septiembre de 2021): 1–12. http://dx.doi.org/10.47577/technium.v3i8.4691.

Texto completo

Resumen

Computers have long been applied to physics and education. Considering that computer technologies are affecting science in many ways, special attention is payed to images and image analyses. RGB processing is used to analyse several computer images and presented with this papper. Furthermore, numerical data from images are used to tables and graphs, to motivate students devoted to science and research.

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Onoral, Özay. "New Approaches in Computer Aided Printing Technologies". Cumhuriyet Dental Journal 19, n.º 3 (24 de marzo de 2017): 256. http://dx.doi.org/10.7126/cumudj.298920.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Gaines, B. R. y M. L. G. Shaw. "The changing technologies underlying computer-aided design". Environment and Planning B: Planning and Design 13, n.º 4 (1986): 377–84. http://dx.doi.org/10.1068/b130377.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Horváth, László y Imre J. Rudas. "Emerging Intelligent Technologies in Computer-Aided Engineering". Journal of Advanced Computational Intelligence and Intelligent Informatics 4, n.º 4 (20 de julio de 2000): 268–78. http://dx.doi.org/10.20965/jaciii.2000.p0268.

Texto completo

Resumen

Competition generated the requirement of quick decisions at engineering activities. As a consequence, application of advanced computer modeling in engineering design needs application of intelligent computer methods to assist human decision making. A powerful CAD/CAM system with a comprehensive range of sophisticated modeling tools for describing engineering objects and programming tools for creating modeling procedures constitutes an appropriate environment to accept intelligent methods. The only way of survival for companies producing mechanical products on the competitive edge seems application of advanced modeling together with intelligent decision making. Much modeling, problem solving, database handling, visualization and other methods are involved in a typical computer-based engineering process. This process recently relies upon an integrated set of modeling tools and an integrated product database. Involving intelligent computer methods is a great challenge in this field. This paper surveys advanced modeling from the point of view of application of intelligent methods. It is organized as follows. A characterization of state of the art in advanced engineering modeling reveals important issues to be discussed in this paper. Following this, worldwide network-based group work of engineers is discussed. Human computer interaction (HCI) and network communication methods as important aspects of computer-aided engineering are outlined. Then recent development results in modeling of mechanical systems with special emphasis on integrated modeling of mechanical products, especially well-engineered shapes, are introduced. Finally, virtual manufacturing as an area of involving intelligent methods in CAD/CAM technology is discussed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Chen, Shang-Liang y Wen-Tsai Wang. "Computer aided manufacturing technologies for centrifugal compressor impellers". Journal of Materials Processing Technology 115, n.º 3 (septiembre de 2001): 284–93. http://dx.doi.org/10.1016/s0924-0136(01)00828-7.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Lynch, Charles J. y Conor Liston. "New machine-learning technologies for computer-aided diagnosis". Nature Medicine 24, n.º 9 (septiembre de 2018): 1304–5. http://dx.doi.org/10.1038/s41591-018-0178-4.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Neugebauer, Jörg, Gerhard Stachulla, Lutz Ritter, Timo Dreiseidler, Robert A. Mischkowski, Erwin Keeve y Joachim E. Zöller. "Computer-aided manufacturing technologies for guided implant placement". Expert Review of Medical Devices 7, n.º 1 (enero de 2010): 113–29. http://dx.doi.org/10.1586/erd.09.61.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

11

Maba, Adem. "Computer-aided music education and musical creativity". Journal of Human Sciences 17, n.º 3 (7 de agosto de 2020): 822–30. http://dx.doi.org/10.14687/jhs.v17i3.5908.

Texto completo

Resumen

It has become an absolute necessity to integrate informatics into educational activities as it is in all areas of life by using innovative teaching methods in the globalized world. As in other fields, developing the knowledge and experience of students by using information technologies in music education should be one of the principles of today's education system. Utilizing computer technologies and software applications especially in the areas of music perception in order to promote the creativity and knowledge contributes to an increase in students' positive attitude towards the course by enriching the context of the course. If a complex and difficult topic, such as composing music, which is one of the upper dimensions of creativity, is supported by the computer technologies and software applications, it will obviously help students to understand the process that is very demanding and create a product. In addition, many subjects that are difficult and abstract for everyone to conceive can be made easier by means of the computer technologies and software. When the educational programs developed in recent years are examined, it can be seen that informatics is included in many learning outcomes and activities aiming to improve musical creativity. In this study, detailed information about the effect of computer-aided education on the development of musical creativity is given. Suggestions for future studies are also presented.

Los estilos APA, Harvard, Vancouver, ISO, etc.

12

Emoto, M. y A. Gomi. "Latest Trends of Computer-aided Technologies in Construction Companies". Concrete Journal 50, n.º 9 (2012): 820–23. http://dx.doi.org/10.3151/coj.50.820.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

13

Kidd, P. T. "On the Design of Skill Supporting Computer-Aided Technologies". IFAC Proceedings Volumes 25, n.º 27 (septiembre de 1992): 35–41. http://dx.doi.org/10.1016/s1474-6670(17)49555-3.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

14

Kyratsis, Panagiotis, Konstantinos Kakoulis y Angelos P. Markopoulos. "Advances in CAD/CAM/CAE Technologies". Machines 8, n.º 1 (13 de marzo de 2020): 13. http://dx.doi.org/10.3390/machines8010013.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

15

KALELİ, Necati, Çağrı URAL y Yurdanur UÇAR. "Computer-aided dental manufacturing technologies used in fabrication of metal frameworks". Journal of Experimental and Clinical Medicine 38, SI-2 (19 de mayo de 2021): 119–22. http://dx.doi.org/10.52142/omujecm.38.si.dent.7.

Texto completo

Resumen

Metal alloys have been used for many years as framework material of dental restorations. The conventional lost-wax and casting method, which was very popular in fabrication of metal frameworks, are now being replaced by computer-aided manufacturing technologies. Computer-aided manufacturing methods offer many advantages, such as standardization and quality in manufacturing, precise fit of restorations, and improved mechanical strength. Digital technologies used in fabrication of metal frameworks are simply classified as subtractive and additive computer-aided manufacturing systems, and each have their own subdivisions, which show differences in the used technology. This review summarizes computer-aided systems used in fabrication of metal frameworks in terms of use in dental practice, advantages, disadvantages and provides clinical recommendations.

Los estilos APA, Harvard, Vancouver, ISO, etc.

16

Yushchenko, Alexander G. "A Computer Aided Synergetic WW3!" Cross-Currents: An International Peer-Reviewed Journal on Humanities & Social Sciences 4, n.º 4 (25 de julio de 2018): 52–57. http://dx.doi.org/10.36344/ccijhss.2018.v04i04.003.

Texto completo

Resumen

The paper proposes a hypothesis that Russia uses AI methods and supercomputers to optimize its strategy in the synergistic war. The priorities of the synergistic war and the methodology for revealing its consequences through intellectual simulation are described. Several resonant geopolitical events in the US and Ukraine that seemed to be patriotic when initiated by the presidents or civic activists but ultimately proved to be beneficial to the enemy are reviewed in this light. A new body intended for global geopolitical monitoring and management of synergetic defense of the Russian Federation is described and analyzed, which bases its work on an expert system installed on a powerful supercomputer. The importance of the information component of the synergetic war is underlined and the technologies for Data Mining modeling the media influence on a society are briefly described. It is proposed to create defense centers in NATO member countries that would be analogous to the described defense center in Russia, and it is recommended to use AI methods in their work to simulate geopolitical situations for making more effective management decisions.

Los estilos APA, Harvard, Vancouver, ISO, etc.

17

Mihailovic, Branko, Milos Duka, Zoran Lazic, Dragan Mladenovic, Biljana Vujicic y Milan Miladinovic. "Computer-aided technologies in diagnostics and therapy of impacted teeth". Vojnosanitetski pregled 68, n.º 4 (2011): 353–58. http://dx.doi.org/10.2298/vsp1104353m.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

18

Raffaeli, Roberto y Michele Germani. "Advanced computer aided technologies for design automation in footwear industry". International Journal on Interactive Design and Manufacturing (IJIDeM) 5, n.º 3 (17 de mayo de 2011): 137–49. http://dx.doi.org/10.1007/s12008-011-0122-z.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

19

Saz, Oscar, Shou-Chun Yin, Eduardo Lleida, Richard Rose, Carlos Vaquero y William R. Rodríguez. "Tools and Technologies for Computer-Aided Speech and Language Therapy". Speech Communication 51, n.º 10 (octubre de 2009): 948–67. http://dx.doi.org/10.1016/j.specom.2009.04.006.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

20

Collins, Mark A. "Computer-Aided Screening: Myth, Magic, or Reality". Journal of Biomolecular Screening 1, n.º 2 (marzo de 1996): 81–84. http://dx.doi.org/10.1177/108705719600100206.

Texto completo

Resumen

Worldwide, considerable research efforts are being directed toward the discovery of novel drugs against human diseases. Enabling technologies have provided much knowledge about disease mechanisms, extremely sensitive assay techniques, and expanding compound libraries, and much of the information resides in computer databases. Despite this massive technological effort the number of truly new drugs available to treat disease is not that great, yet the information may well exist about them. It could be argued that the problem is not the quantity of information, nor necessarily its quality, but the ability to assimilate and act upon it. New developments in software technology, changes in the way in which users expect to interact and use computers, and the opening up and globalization of information networks will impact greatly on the pharmaceutical industry. This paper discusses these developments and provides a somewhat far-reaching vision of a future where computers play a more fundamental role in screening for new drugs.

Los estilos APA, Harvard, Vancouver, ISO, etc.

21

Chelyshkov, Pavel. "Computer-aided design of cyber-physical building systems". E3S Web of Conferences 97 (2019): 01012. http://dx.doi.org/10.1051/e3sconf/20199701012.

Texto completo

Resumen

At present, an increasing number of researchers and specialists in the construction industry come to the opinion that it is advisable to use a number of technologies (BIM, Smart City, Big Data, IOT and others) in the practice of construction (in the broad sense of this concept), which are united by the concept of the Fourth Industrial Revolution. The result of the implementation of these technologies in the construction should be the transition to the widespread use of cyber-physical systems. The problem of using information technologies in construction today is not due to the lack of this process as such, but to the lack of consistency and consistency in it. Fragmentary nature of the application, inconsistency of the applied technologies at different levels of management and at different stages of the life cycle of construction projects sharply reduce the potential positive effect of informatization and building automation. At the same time, the concept of cyber-physical systems, that is, the integration at the system level of physical processes and controls has proven effective in industrial production. The approaches to ensuring the processes of designing cyber-physical building systems through the development and application of General mathematical models for the processes of data exchange and management are considered. The presented models of data exchange and management of cyber-physical building systems describe the processes implemented at each stage of the life cycle of cyber-physical building systems. Functional blocks of the considered models allow to describe the processes of data collection, storage and processing on the current and past stages of the life cycle of cyber-physical construction systems. The presented models are the elements of mathematical support of the processes of designing cyber-physical building systems, which determine the processes of information exchange and management between the structures of cyber-physical building systems of different levels of hierarchy in the full life cycle.

Los estilos APA, Harvard, Vancouver, ISO, etc.

22

Pfeifer, Marcel Rolf. "Computer-Aided Standardisation for Manufacturing and Maintenance Activities". Technological Engineering 16, n.º 1 (1 de octubre de 2019): 22–24. http://dx.doi.org/10.1515/teen-2019-0004.

Texto completo

Resumen

Abstract The paper deals with the development and application of computer-aided standardisation (CAS) for the distribution of standardisation data of production and maintenance processes within the company network. Rising integration pressure of company software tools also include CAx technologies. These CAx technologies provide software solutions for different applications, being able to work closely together with ERP-systems, Business Intelligence (BI) tools and further systems. The possibility of integration makes it also feasible to look on the CAS tool and its potential. While CAS is a topic not yet fully discussed, future development may lead to the requirement of integrating the CAS with the ERP and planning system. Approaches, such as CIM, digital factories (DF) and Industry 4.0 benefit from a broader database available with the CAS system employed

Los estilos APA, Harvard, Vancouver, ISO, etc.

23

Medetbayeva, Salima A. y Nurlan K. Akhmetov. "Psychological and Pedagogical Problems of Computer-aided Teaching of Natural Sciences". International Journal of Emerging Technologies in Learning (iJET) 16, n.º 20 (25 de octubre de 2021): 208. http://dx.doi.org/10.3991/ijet.v16i20.24427.

Texto completo

Resumen

Information has become a global inexhaustible resource for mankind, which has entered a new era in the development of civilisation. Today it is important to improve the quality of education by introducing computer technologies in chemistry classes. The purpose of the study was to develop and present the methodological foundations of the development and implementation of computer technologies in the game teaching of chemistry to improve the teaching methods. To achieve this goal, the corresponding tasks were identified, as well as methods for their solution: the analysis and comparative analysis, modelling. Results of the study: the positive and negative factors of the use of modern computer technologies in chemistry classes were identified; the principles of selecting the content of the material using information and communication technologies in teaching were characterised; the methodical foundations of the application and use of information and communication technologies when teaching chemistry were considered. It was concluded that the use of a computer in the educational process contributes to the improvement of teaching methods more than any other technical means at the teacher's disposal. The introduction of information technologies into the educational process significantly changes and ultimately increases the effectiveness of teaching. The practical significance of the study is conditioned by the fact that the methodical foundations of the use of information technologies in chemistry class presented in the paper can be applied in schools and other educational institutions.

Los estilos APA, Harvard, Vancouver, ISO, etc.

24

Thakkar, Amol, Simon Johansson, Kjell Jorner, David Buttar, Jean-Louis Reymond y Ola Engkvist. "Artificial intelligence and automation in computer aided synthesis planning". Reaction Chemistry & Engineering 6, n.º 1 (2021): 27–51. http://dx.doi.org/10.1039/d0re00340a.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

25

Doraiswamy, Anand y Roger J. Narayan. "Vascular tissue engineering by computer-aided laser micromachining". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 368, n.º 1917 (28 de abril de 2010): 1891–912. http://dx.doi.org/10.1098/rsta.2010.0004.

Texto completo

Resumen

Many conventional technologies for fabricating tissue engineering scaffolds are not suitable for fabricating scaffolds with patient-specific attributes. For example, many conventional technologies for fabricating tissue engineering scaffolds do not provide control over overall scaffold geometry or over cell position within the scaffold. In this study, the use of computer-aided laser micromachining to create scaffolds for vascular tissue networks was investigated. Computer-aided laser micromachining was used to construct patterned surfaces in agarose or in silicon, which were used for differential adherence and growth of cells into vascular tissue networks. Concentric three-ring structures were fabricated on agarose hydrogel substrates, in which the inner ring contained human aortic endothelial cells, the middle ring contained HA587 human elastin and the outer ring contained human aortic vascular smooth muscle cells. Basement membrane matrix containing vascular endothelial growth factor and heparin was to promote proliferation of human aortic endothelial cells within the vascular tissue networks. Computer-aided laser micromachining provides a unique approach to fabricate small-diameter blood vessels for bypass surgery as well as other artificial tissues with complex geometries.

Los estilos APA, Harvard, Vancouver, ISO, etc.

26

Bilgin, Mehmet Selim, Ebru Nur Baytaroğlu, Ali Erdem y Erhan Dilber. "A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication". European Journal of Dentistry 10, n.º 02 (abril de 2016): 286–91. http://dx.doi.org/10.4103/1305-7456.178304.

Texto completo

Resumen

ABSTRACTThe aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now.

Los estilos APA, Harvard, Vancouver, ISO, etc.

27

Chen, Ji Wen, Xiao Dong Xu y Xiao Qin Shen. "Review of Computer Aided Product Innovation Design Based on Knowledge". Applied Mechanics and Materials 713-715 (enero de 2015): 2335–40. http://dx.doi.org/10.4028/www.scientific.net/amm.713-715.2335.

Texto completo

Resumen

Design knowledge acquisition, representation and application are key technologies in computer-aided innovation design. It is an important way to improve the innovation capability and core competitiveness of manufacturing enterprises. The present state of the art of theories and tools of computer-aided product innovation design was presented, some key technologies and problems of the computer-aided product innovation design based on knowledge were summarized and analyzed. It was proposed that the ontology-based knowledge modeling based on design process was the base of computer-aided innovation design, The efficient and precise ontology matching method is seeked to efficiently support updating design knowledge by synthetically considering the concept semantics and concept hierarchy structure, and the knowledge association and concept semantic retrieval and reasoning can be better realized by taking into full consideration of semantic relationships of between design knowledges.

Los estilos APA, Harvard, Vancouver, ISO, etc.

28

Rakhmanovich, Karimov Bakhtiyor y Mutalov Shoahmad Shonazarovich. "MULTIMEDIA AND INFORMATION TECHNOLOGIES AIDED SOLUTIONS IN THE SYSTEM OF WORLD CIVILISATION LANGUAGE PROCESSES". European International Journal of Multidisciplinary Research and Management Studies 02, n.º 10 (1 de octubre de 2022): 154–60. http://dx.doi.org/10.55640/eijmrms-02-10-29.

Texto completo

Resumen

It is proposed to create averaged languages by using the methods of mathematical and computer linguistics based on averaging vocabularies and grammar rules and norms of genealogically cognate languages has been proposed. The idea of creating averaged world language is proposed by means of averaging the averaged and isolated languages. Social, cultural, linguistic, information, communication problems of averaged languages and ways of using multimedia technologies in the area have been investigated.

Los estilos APA, Harvard, Vancouver, ISO, etc.

29

Anakhov, Sergey, Yuriy Pyckin y Anatoliy Matushkin. "METHODICAL PRINCIPLES OF COMPUTER-AIDED GAS-DYNAMIC DESIGN IN ELECTROPLASMA TECHNOLOGIES". PNIPU Bulletin. The mechanical engineering, materials science. 20, n.º 1 (30 de marzo de 2018): 62–70. http://dx.doi.org/10.15593/2224-9877/2018.1.07.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

30

Anakhov, Sergey, Yuriy Pyckin y Anatoliy Matushkin. "METHODICAL PRINCIPLES OF COMPUTER-AIDED GAS-DYNAMIC DESIGN IN ELECTROPLASMA TECHNOLOGIES". PNIPU Bulletin. The mechanical engineering, materials science. 20, n.º 1 (30 de marzo de 2018): 62–70. http://dx.doi.org/10.15593/2227-9877/2018.1.07.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

31

Kldd, P. T. "Interdisciplinary design of skill-based computer-aided technologies: Interfacing in depth". International Journal of Human Factors in Manufacturing 2, n.º 3 (julio de 1992): 209–28. http://dx.doi.org/10.1002/hfm.4530020304.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

32

Shakya, Sudip, Shinya Inazumi y Supakij Nontananandh. "Potential of Computer-Aided Engineering in the Design of Ground-Improvement Technologies". Applied Sciences 12, n.º 19 (26 de septiembre de 2022): 9675. http://dx.doi.org/10.3390/app12199675.

Texto completo

Resumen

The progress status of jet-grouting construction during the construction phase is difficult to verify and even after the completion of construction, it can be verified only by empirical methods. This study attempted to recreate a realistic simulation result of the middle-pressure jet-grouting method by establishing a computer-aided engineering (CAE) system from the planning/design stage of the ground model and verifying the validity of the construction process after the model was analyzed by the moving particle semi-implicit (MPS) method. The governing parameters for the ground were determined by the MPS simulation of the unconfined compression test. The construction simulation was analyzed and the results were validated by visual confirmation of the related phenomena, such as the soil-improved body formation and mud discharge. To verify the accuracy of the mud discharge phenomenon, three different probe regions were set above the model ground and the amount of mud discharge generated in each region was computed before drawing an overall conclusion of the study. A soil-improvement body of approximately 0.38 m3 was observed to have formed at the end of the study and the highest mud discharge particle number measured, for instance, was 896. This study is expected to serve as a guideline for further studies on simulation-based research.

Los estilos APA, Harvard, Vancouver, ISO, etc.

33

Hatamleh, Muhanad M., Elizabeth Yeung, Jonas Osher y Chrisopher Huppa. "Novel Treatment Planning of Hemimandibular Hyperplasia by the Use of Three-Dimensional Computer-Aided-Design and Computer-Aided-Manufacturing Technologies". Journal of Craniofacial Surgery 28, n.º 3 (mayo de 2017): 764–67. http://dx.doi.org/10.1097/scs.0000000000003438.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

34

Deepak, B. B. V. L., Raju M. V. A. Bahubalendruni, Ch A. Rao y Jalumuru Nalini. "Computer aided weld seam tracking approach". Journal of Engineering, Design and Technology 15, n.º 1 (6 de febrero de 2017): 31–43. http://dx.doi.org/10.1108/jedt-10-2015-0069.

Texto completo

Resumen

Purpose This paper aims to automate the welding operation that motion control, sensor integration and coordination with the welding power source. Therefore, there is a need for sophisticated technologies to control precisely the process in terms of positioning the welding torch, and controlling the welding parameters through the use of correct devices which are aided by appropriate control tools and techniques. Design/methodology/approach A new seam tracking methodology, named sewing technique, has been introduced for the welded joints available in computer-aided design (CAD) environment. This methodology gives the seam path by drawing a line through the adjacent centroids of curve fitted in the weld joint volume. Obtained geometric path and kinematic constraints are given as input to the modeled robot for performing welding operation followed by desired trajectory. Findings In this investigation, a novel and efficient weld seam technique has been developed to produce uniform welded joints. The key feature of this approach is that the initial and end positions of the weld seams can be obtained easily. Because of this, the robot can be controlled flexibly during welding operation. Originality/value This investigation deals with the development of an automated seam tracking methodology for the welded joints available in CAD environment. Validation of the developed methodology has been done through simulation results while performing welding operations for different weld profiles.

Los estilos APA, Harvard, Vancouver, ISO, etc.

35

Wu, Bao Zhong, Jing Qiu, Jing Zhong Gong, Meng Zhang y Xin Yin. "Design of Computer-Aided Assembly Software for Precision Machines". Advanced Materials Research 630 (diciembre de 2012): 463–72. http://dx.doi.org/10.4028/www.scientific.net/amr.630.463.

Texto completo

Resumen

Assembly is the very last and most important procedure to ensure the quality of precision machines. The prototype of computer-aided assembly software is designed, which takes the processes, tools and information into consideration. The multi-layer architecture is built, and some key technologies of the software and their preliminary solutions are elaborated. Finally, the initial application of the software is presented.

Los estilos APA, Harvard, Vancouver, ISO, etc.

36

Zhang, Ji Tang, C. Tan y X. G. Shen. "A Study on Computer Aided Ultrasonic Testing Scheme Planning". Key Engineering Materials 474-476 (abril de 2011): 1249–54. http://dx.doi.org/10.4028/www.scientific.net/kem.474-476.1249.

Texto completo

Resumen

On the basis of proposing the general ultrasonic testing system, this paper discusses the concept and the composite module of computer aided ultrasonic testing scheme planning. By the thought of ultrasonic testing part family and modularization parameterization design, and the paper induces the needed study to solute the theory question and each key technologies of ultrasonic testing scheme. Finally, it simply introduced the developed computer aided ultrasonic testing scheme planning system of rotational parts.

Los estilos APA, Harvard, Vancouver, ISO, etc.

37

Popov, Vladimir y Tatjana Grigorjeva. "INTEGRATED COMPUTER – AIDED DESIGN OF BUILDING STRUCTURES". Engineering Structures and Technologies 2, n.º 1 (31 de marzo de 2010): 31–37. http://dx.doi.org/10.3846/skt.2010.04.

Texto completo

Resumen

With the growth of information technologies in the field of computer-aided design, the concept of CAD acquires new meaning and changes the contents. More and more a new definitions, i.e. Building Information Modeling - BIM, Fabrication Information Modeling - FIM, Integrated Structural Modeling - ISM, Building Lifecycle Management - PLM and others are encountered, the concept of which may be described as way to develop the strategy of building project design, construction, and maintenance management based on the computer aided modeling and simulation technologies. Examine BIM application in building design process it can be assumed that of object modeling and simulation technique comprises a full range of actions starting from the development of virtual model of the project under consideration, describing all physical parameters characteristic of a real structure, defining the conditions of its position. Then analysis of model behavior under real maintenance conditions is performed: effects of different character are described and the results obtained are analyzed. The results received by next step are presented in common technical documentation form: general arrangement and erection drawings are generated, final detailing of connections and structural elements in the form of shop drawing or NC code is performed, bill of materials, cut lists, various reports, specifications and estimates are composed. During the last five years there is strong request from the market for the state-of-the-art computer-aided design applications developed to meet the needs and requirements of the Architectural, Engineering, and Construction as well as Plant, Process, and Power industries, for high performance, flexible and versatile tools with extended graphics integration to simulation and analysis systems within a user-friendly design environment that allows the close emulation of natural design phases and workflow to which structural are accustomed. This could became possible due to the innovative development of ‘new generation’ structural software application capable to maintain an intelligent and true 3D real-world simulated structure containing all the information required for the general and detailed design, fabrication and construction of engineering structures, enabling designers to operate intuitively in the adaptive high-performance real-time visual modeling environment while simultaneously achieving high-quality results by applying powerful simulation, analysis and optimization methods which would guarantee a rational and effective choice of the constructive decision. It has to be flexible to enable external best of breed vertical market products to be linked to the application and hence creating an open design environment; this enables members of a workgroup to collaborate effectively, performing the multiple tasks associated with construction design.

Los estilos APA, Harvard, Vancouver, ISO, etc.

38

Shah, Mayank. "RETRACTED: Auricular prosthesis fabrication using computer-aided design and rapid prototyping technologies". Prosthetics and Orthotics International 40, n.º 3 (8 de octubre de 2013): NP1. http://dx.doi.org/10.1177/0309364613504779.

Texto completo

Resumen

At the request of the editor Mayank Shah ‘Auricular prosthesis fabrication using computer-aided design and rapid prototyping technologies’ Prosthetics and Orthotics International, published online before print on October 8, 2013 as doi:10.1177/0309364613504779 has been retracted. This is because it contains unattributed overlap with K. Subburaj, C. Nair, S. Rajesh, S. M. Meshram, B. Ravi ‘Rapid development of auricular prosthesis using CAD and rapid prototyping technologies’ International Journal of Oral & Maxillofacial Surgery 2007; 36: 938–943 doi:10.1016/j.ijom.2007.07.013

Los estilos APA, Harvard, Vancouver, ISO, etc.

39

Matúšová, Miriam y Erika Hrušková. "Applying the Computer Aided Systems in Education Process". Management Systems in Production Engineering 27, n.º 1 (1 de marzo de 2019): 46–50. http://dx.doi.org/10.1515/mspe-2019-0008.

Texto completo

Resumen

AbstractThe article summarizes the experience of laboratory technical subjects teaching methodologies using a number of software products. The main aim is to modernize the teaching process in accordance with the requirements of today – based on information technology. Increasing of the study attractiveness and effectiveness is due to the introduction of Computer Aided (CA) technologies in the learning process. This paper discussed the areas where individual CA system used and concrete examples used in the education process. They are CAD system Catia V5, FluidSIM created and simulates the pneumatics and electropneumatic schemes and circles, software witness used for simulation of material flow planning and RobotStudio that illustrates operated Robot in his own manipulated area. Environment using CA systems are briefly presented in each chapter.

Los estilos APA, Harvard, Vancouver, ISO, etc.

40

Zhou, Xian y Qing Zhao. "Key Technologies of Computer Aided Color Design System for the Color Blind". Advanced Materials Research 411 (noviembre de 2011): 617–21. http://dx.doi.org/10.4028/www.scientific.net/amr.411.617.

Texto completo

Resumen

The paper analyses the feature of the color blind when they distinguish colors, and according to their physiological feature, a new strategy of designing color based on mapping arithmetic and thesis of designing color are proposed, and a model for the color blindness to choose color in contrast is realized. Finally, the system is proved effectively through merging into the solid works software.

Los estilos APA, Harvard, Vancouver, ISO, etc.

41

Torgaev, S. N. y M. L. Gromov. "The XIII International Conference Computer-aided technologies in applied mathematics ICAM 2020". Journal of Physics: Conference Series 1680 (diciembre de 2020): 011001. http://dx.doi.org/10.1088/1742-6596/1680/1/011001.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

42

Karima, M. y J. Richardson. "A knowledge-based systems framework for computer-aided technologies in metal forming". Journal of Mechanical Working Technology 15, n.º 3 (diciembre de 1987): 253–73. http://dx.doi.org/10.1016/0378-3804(87)90041-6.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

43

Lin, Yipeng. "Review of Modern Computer-aided Drug Design Methods". International Journal of Biology and Life Sciences 1, n.º 1 (1 de diciembre de 2022): 47–50. http://dx.doi.org/10.54097/ijbls.v1i1.3230.

Texto completo

Resumen

Computer technology has developed rapidly in recent decades, and it is also widely used in the field of drug research and development. Computer-aided drug design (CADD) has appeared in the form of assistance to drug discovery process in this background. Computer-aided drug design can save time which is spent in the experimental process in the real world. Since appearance of computer-based drug design strategies, the concepts of HTS, structure-based and ligand-based drug design (SBDD and LBDD), and virtual screening (VS) have been proposed. These technologies have their own advantages and disadvantages, and have different scope of application. This review provides an introduction of modern drug design strategies which are based on computer technology, classifies different methods and finds out the basic working principle of each one, the applicability and limitations of these methods are discussed and recommendations are provided in the application of each method.

Los estilos APA, Harvard, Vancouver, ISO, etc.

44

Wang, Chuan. "Application Research of Computer Aided Design in Environmental Art Design". BCP Social Sciences & Humanities 15 (13 de marzo de 2022): 228–32. http://dx.doi.org/10.54691/bcpssh.v15i.427.

Texto completo

Resumen

Computer-aided design technology has certain improvements and enhancements to the planning of environmental art. This paper proposes a conceptual model of parametric virtual vegetation landscape planning and design and virtual display by using new technologies such as virtual reality, virtual plants and geographic information systems. In this way, the parametric plant modeling method and the plant spatial layout method are integrated.

Los estilos APA, Harvard, Vancouver, ISO, etc.

45

SUSCA, LORENZO, FERRUCCIO MANDORLI, CATERINA RIZZI y UMBERTO CUGINI. "Racing car design using knowledge aided engineering". Artificial Intelligence for Engineering Design, Analysis and Manufacturing 14, n.º 3 (junio de 2000): 235–49. http://dx.doi.org/10.1017/s0890060400143057.

Texto completo

Resumen

The evolution of computer aided design (CAD) systems and related technologies has promoted the development of software for the automatic configuration of mechanical systems. This occurred with the introduction of knowledge aided engineering (KAE) systems that enable computers to support the designer during the decision-making process. This paper presents a knowledge-based application that allows the designer to automatically compute and evaluate mass properties of racing cars. The system is constituted by two main components: the computing core, which determines the car model, and the graphic user interface, because of which the system may be used also by nonprogrammers. The computing core creates the model of the car based on a tree structure, which contains all car subsystems (e.g., suspension and chassis). Different part–subpart relationships define the tree model and link an object (e.g., suspension) to its components (e.g., wishbones and wheel). The definition of independent parameters (including design variables) and relationships definition allows the model to configure itself by evaluating all properties related to dimension, position, mass, etc. The graphic user interface allows the end user to interact with the car model by editing independent design parameters. It visualizes the main outputs of the model, which consist in numeric data (mass, center of mass of both the car and its subsystems) and graphic elements (car and subsystems 3D representation).

Los estilos APA, Harvard, Vancouver, ISO, etc.

46

Zhou, Bing, Shao Yi Bei y Jing Bo Zhao. "Computer-Aided Design of Curved Assistance Characteristic of EPS System". Applied Mechanics and Materials 39 (noviembre de 2010): 598–601. http://dx.doi.org/10.4028/www.scientific.net/amm.39.598.

Texto completo

Resumen

The control strategy is one of the key technologies of EPS system, and the assistance characteristic has great importance to the vehicle handiness and road feeling. Based on the EPS dynamic model, the curved assistance characteristic is designed. The curved assistance characteristic has the superiority to find the better balance between handiness and road feeling. It has engineering significance to the overall design, function enhancement and optimization and steering manipulation and safety improvement.

Los estilos APA, Harvard, Vancouver, ISO, etc.

47

Mirkovic, Sinisa, Igor Budak, Tatjana Puskar, Ana Tadic, Mario Sokac, Zeljko Santosi y Tatjana Djurdjevic-Mirkovic. "Application of modern computer-aided technologies in the production of individual bone graft: A case report". Vojnosanitetski pregled 72, n.º 12 (2015): 1126–31. http://dx.doi.org/10.2298/vsp140915117m.

Texto completo

Resumen

Introduction. An autologous bone (bone derived from the patient himself) is considered to be a ?golden standard? in the treatment of bone defects and partial atrophic alveolar ridge. However, large defects and bone losses are difficult to restore in this manner, because extraction of large amounts of autologous tissue can cause donor-site problems. Alternatively, data from computed tomographic (CT) scan can be used to shape a precise 3D homologous bone block using a computer-aided design-computer-aided manufacturing (CAD-CAM) system. Case report. A 63-year old male patient referred to the Clinic of Dentistry of Vojvodina in Novi Sad, because of teeth loss in the right lateral region of the lower jaw. Clinical examination revealed a pronounced resorption of the residual ridge of the lower jaw in the aforementioned region, both horizontal and vertical. After clinical examination, the patient was referred for 3D cone beam (CB)CT scan that enables visualization of bony structures and accurate measurement of dimensions of the residual alveolar ridge. Considering the large extent of bone resorption, the required ridge augmentation was more than 3 mm in height and 2 mm in width along the length of some 2 cm, thus the use of granular material was excluded. After consulting prosthodontists and engineers from the Faculty of Technical Sciences in Novi Sad we decided to fabricate an individual (custom) bovine-derived bone graft designed according to the obtained 3D CBCT scan. Conclusion. Application of 3D CBCT images, computer-aided systems and software in manufacturing custom bone grafts represents the most recent method of guided bone regeneration. This method substantially reduces time of recovery and carries minimum risk of postoperative complications, yet the results fully satisfy the requirements of both the patient and the therapist.

Los estilos APA, Harvard, Vancouver, ISO, etc.

48

Sukiasyan, Eduard. "Progress of computer-aided library technologies in Russia: Thinking of something expected, though unaccomplished". Scientific and Technical Libraries, n.º 4 (1 de abril de 2017): 34–43. http://dx.doi.org/10.33186/1027-3689-2017-4-34-43.

Texto completo

Resumen

The author reviews the development of computer-aided library technologies in Russia. He analyzes why we have stopped half way and do not design union e-catalogs, do not introduce single user cards, or uniformed computer-aided retrieval software. The author also questions why we abandoned card catalogs though had not define whether e-catalogs could fully make up for their functionality, why almost every national ALIS is alike those foreign systems; why we use three formats at once - MARC21, UNIMARC, RUSMARC? The author concludes that departmental dispersion of libraries prevents them from solving the problems.

Los estilos APA, Harvard, Vancouver, ISO, etc.

49

Erdolu, Emek. "Lines, triangles, and nets: A framework for designing input technologies and interaction techniques for computer-aided design". International Journal of Architectural Computing 17, n.º 4 (diciembre de 2019): 357–81. http://dx.doi.org/10.1177/1478077119887360.

Texto completo

Resumen

This article serves to the larger quest for increasing our capacities as designers, researchers, and scholars in understanding and developing human-computer interaction in computer-aided design. The central question is on how to ground the related research work in input technologies and interaction techniques for computer-aided design applications, which primarily focus on technology and implementation, within the actual territories of computer-aided design processes. To discuss that, the article first reviews a collection of research studies and projects that present input technologies and interaction techniques developed as alternative or complimentary to the mouse as used in computer-aided design applications. Based on the mode of interaction, these studies and projects are traced in four categories: hand-mediated systems that involve gesture- and touch-based techniques, multimodal systems that combine various ways of interaction including speech-based techniques, experimental systems such as brain-computer interaction and emotive-based techniques, and explorations in virtual reality- and augmented reality-based systems. The article then critically examines the limitations of these alternative systems related to the ways they have been envisioned, designed, and situated in studies as well as of the two existing research bases in human-computer interaction in which these studies could potentially be grounded and improved. The substance of examination is what is conceptualized as “frameworks of thought”—on variables and interrelations as elements of consideration within these efforts. Building upon the existing frameworks of thought, the final part discusses an alternative as a vehicle for incorporating layers of the material cultures of computer-aided design in designing, analyzing, and evaluating computer-aided design-geared input technologies and interaction techniques. The alternative framework offers the potential to help generate richer questions, considerations, and avenues of investigation.

Los estilos APA, Harvard, Vancouver, ISO, etc.

50

Yezhova, Olga V., Kalina L. Pashkevich y Denys V. Gryn. "DEVELOPMENT OF TECHNOLOGY EDUCATION STUDENTS’ ICT COMPETENCE WHILE TEACHING COMPUTER-AIDED FASHION DESIGN". Information Technologies and Learning Tools 73, n.º 5 (22 de octubre de 2019): 15–27. http://dx.doi.org/10.33407/itlt.v73i5.2547.

Texto completo

Resumen

The present paper deals with the problem of CAD (computer-aided design) competence formation of would-be teachers of technology and vocational school teachers. It is noted that for fashion industry to develop, it is necessary that its professionals should have both the knowledge of basic communication technologies and foundations of using CAD. ICT competence is necessary for trainee teachers of technology and vocational education specialists both for their educational activity and for successful creation of outfit models using computer techniques. The aim of the research lies in grounding the list of software equipment to be used by trainee teachers of technology and vocational school teachers to provide effective learning of CAD in professional sphere. The introduction to professional-oriented software is realized in higher education institutions of Ukraine during the course of “Basics of computer aided design”, after a preparatory course “Information Technologies” Information technologies are used in fashion industry for creating new models, equipment management, and for maintaining the life cycle of outfits. Hereby presented is a systemized list of computer software tools for professional purposes to be used in automated workstation of the designer: software tools for correct and safe system component management; software for file creation and information sharing; CAD-subsystems. The content of the course “Basics of computer aided design” have been described. Practical approbation has proved effectiveness of the developed syllabus along with the methodological support of the course “Basics of computer-aided design”. The results of the investigation are important for grounding the content of study for trainee teachers of technology and specialists of vocational education, as well as for professionals in fashion industry.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Artículos de revistas sobre el tema "Computer Aided Technologies"

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros