Tesis sobre el tema "CJC"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte los 50 mejores tesis para su investigación sobre el tema "CJC".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Explore tesis sobre una amplia variedad de disciplinas y organice su bibliografía correctamente.
Bukowski, Meike [Verfasser], Bernd [Akademischer Betreuer] Siebenhüner y Ulrich [Akademischer Betreuer] Scheele. "Environmental conflicts and conservation justice (CJC) in marine protection : a CJC-analysis / Meike Bukowski ; Bernd Siebenhüner, Ulrich Scheele". Oldenburg : BIS der Universität Oldenburg, 2018. http://d-nb.info/1181325218/34.
Texto completoBukowski, Meike Verfasser], Bernd [Akademischer Betreuer] [Siebenhüner y Ulrich [Akademischer Betreuer] Scheele. "Environmental conflicts and conservation justice (CJC) in marine protection : a CJC-analysis / Meike Bukowski ; Bernd Siebenhüner, Ulrich Scheele". Oldenburg : BIS der Universität Oldenburg, 2018. http://nbn-resolving.de/urn:nbn:de:gbv:715-oops-40556.
Texto completoBadenes, Marina Martins. "In vivo evaluation of the role of Delta-like 4/Notch signaling in the development of intestinal tumors". Doctoral thesis, Universidade de Lisboa. Faculdade de Medicina Veterinária, 2016. http://hdl.handle.net/10400.5/11190.
Texto completoColorectal cancer (CRC) is the third most common malignancy and the second leading cause of cancer-related death in the Western world. Dll4/Notch signaling has been shown to regulate tumor angiogenesis and cancer stem cell maintenance in CRC, but how it affects the intestinal precancerous lesions that lead to CRC initiation is not known. Therefore we evaluated the role of Dll4/Notch pathway during intestinal tumorigenesis. For that we used two well-established mouse models of CRC, the ApcMin/+ autochthonous transgenic model and the azoxymethane plus dextran sodium sulphate chemically induced model of chronic colitis associated-cancer (CAC). First we analyzed the protein expression pattern of Dll4 and other Notch pathway members in these settings relatively to that in the normal gut. Then we evaluated the effect of endothelial-specific or ubiquitous Dll4 deregulation and performed a therapeutic trial with the Dll4 inhibitor Dll4-Fc. This protein was administered alone, and in combination with the epidermal growth factor receptor (EGFR)-specific tyrosine kinase inhibitor erlotinib to assess if the anti-Dll4 therapy mediated vascular defects impaired the delivery of other anti-cancer drugs to the tumors. We observed that the Notch pathway is activated in the two studied models of CRC. The normal protein expression pattern of Notch pathway members in the gut is altered in chronic colitis and in ApcMin/+ and colitis-driven intestinal tumors. Dll4 is the most upregulated ligand in the intestinal adenomas in both models of CRC and is present in both tumor epithelium and stroma. Both Dll4 blockade (endothelial-specific and ubiquitously) and activation (endothelial-specific) have an inhibitory effect on intestinal tumor initiation and growth by promoting a noncompetent vasculature or decreasing the vessel density, respectively. Besides its angiogenic related effects, Dll4/Notch pathway promotes excessive inflammation in CAC, sustains the tumor stem cell pool and tumor proliferation synergistically with Wnt signaling, and inhibits differentiation mainly of the secretory cells. In addition, the effectiveness of erlotinib is not affected by Dll4-Fc, where these therapies additively inhibit intestinal tumorigenesis.
RESUMO - Avaliação in vivo da função da sinalização intercelular Dll4/Notch no desenvolvimento de tumores intestinais - O cancro colo-rectal (CCR) é o terceiro tipo de cancro mais comum e é uma das principais causas de morte no Mundo Ocidental. O CCR geralmente desenvolve-se esporadicamente, mas também pode ser hereditário como na síndrome polipose adenomatosa familiar (PAF). A PAF está associada à ativação da via de sinalização Wnt através de mutações no gene supressor tumoral Adenomatous Polyposis Coli (APC), que também ocorre frequentemente nos CCR esporádicos. O desenvolvimento do CCR também pode estar associado a inflamação crónica, nomeadamente à doença de Crohn (CD) e à colite ulcerativa (UC). Infelizmente o desenvolvimento de novas estratégias terapêuticas ou preventivas que tenham como alvo vias de sinalização críticas no desenvolvimento do CCR continua a ser extremamente necessário. Uma dessas estratégias tem como alvo a angiogénese tumoral. O primeiro agente anti-angiogénico a ser aprovado foi o Bevacizumab, que é usado em combinação com outros fármacos no tratamento do CCR metastático. No entanto, a utilização deste fármaco leva ao aparecimento de efeitos secundários e resistência tumoral e em tumores não metastáticos não se tem mostrado eficaz. Assim, continua a ser necessário desenvolver melhores estratégias terapêuticas anti-angiogénicas...
Centro de Investigação Interdisciplinar em Sanidade Animal (CIISA) e União Europeia: Fundo Social Europeu
Ede, Andrew y andrew ede@premiers qld gov au. "The Prevention of Police Corruption and Misconduct: A Criminological Analysis of Complaints Against Police". Griffith University. School of Criminology and Criminal Justice, 2000. http://www4.gu.edu.au:8080/adt-root/public/adt-QGU20030102.114721.
Texto completoRezai, Armon. "Demand and distribution in integrated economies". Oxford University Press, 2014. http://dx.doi.org/10.1093/cje/beu060.
Texto completoCoimbra, Daniel Fernando. "Natureza da ligação Ru-NO em novos nitrosilo complexos de rutênio com ligantes quelantes CCC e CNC contendo carbenos". reponame:Repositório Institucional da UFSC, 2015. https://repositorio.ufsc.br/xmlui/handle/123456789/136460.
Texto completoMade available in DSpace on 2015-11-17T03:05:39Z (GMT). No. of bitstreams: 1 335949.pdf: 3299080 bytes, checksum: fc7c42f7c1c0103a1f2daa1e2f7d6199 (MD5) Previous issue date: 2015
Compostos capazes de liberar ou sequestrar óxido nítrico são promissores agentes terapêuticos como antimicrobianos, reguladores da pressão sanguínea, no combate ao câncer, dentre outros. Neste trabalho foram investigados novos nitrosilo complexos de rutênio, potencialmente liberadores de óxido nítrico, contendo ligantes pinça quelantes tridentados em que dois sítios coordenantes são carbenos N heterociclos ligados por uma ponte fenila ou piridil que também coordena-se ao centro metálico. Derivados destes complexos são obtidos pela substituição de grupos alquila no átomo de nitrogênio dos grupos imidazolilideno. A estrutura geométrica e eletrônica destes complexos organometálicos e de seus produtos de redução monoeletrônica foram investigadas por métodos computacionais empregando-se a Teoria do Funcional da Densidade (DFT). A natureza da ligação química Ru NO foi estudada utilizando-se as técnicas de Análise de Decomposição de Energia de Su-Li (Su-Li EDA) e Orbitais Naturais de Ligação (NBO). Neste trabalho também foi avaliada uma metodologia para a predição de potenciais de redução dos nitrosilo complexos de rutênio estudados.
Abstract : Compounds capable of releasing or scavenging nitric oxide are promising therapeutic agents as antimicrobials, blood pressure regulators, in cancer treatment and many others. In this work were investigated new ruthenium nitrosyl complexes, potentially capable of releasing nitric oxide, containing chelating tridentade pincer ligands in which two coordinating sites are N-heterocyclic carbenes united by a bridging coordinating phenyl or pyridyl unit. Derivatives of these complexes are obtained by substitution of alkyl groups at the imidazolylidene nitrogen. The geometric and electronic structure of these organometallic complexes and their one-electron reduction products were investigated by computational methods employing Density Functional Theory. The nature of the Ru NO chemical bond was investigated using the Energy Decomposition Analysis of Su-Li and Natural Bond Orbitals. In this work it was also evaluated a methodology for the prediction of reduction potentials of the ruthenium nitrosyl complexes under investigation.
Coupar, Sally-Anne. "The chronology and development of the coinage of Corinth to the Peloponnesian War". Thesis, University of Glasgow, 2000. http://theses.gla.ac.uk/2557/.
Texto completoKandaskalov, Dmytro. "Etude théorique de défauts ponctuels et complexes dans les métaux : application au fer-cc et nickel-cfc". Thesis, Toulouse, INPT, 2013. http://www.theses.fr/2013INPT0007/document.
Texto completoThe study of point defects (vacancies, impurity) and complex defects (cavities, grain boundary etc.) is a major challenge for solid state physics. The physical and chemical properties of materials (such elasticity, plasticity, embrittlement etc.) are correlated to the presence of these defects. The experimental study is not always able to bring sufficient information about them. In this way computational simulations and the modeling on the atomic level is efficient to interpret the experimental results and to obtain new informations. This PhD work consists also in a theoretical study of defects in metals. This manuscript is organized in four main parts. In the first and second part, we present the theoretical principles and the methodology used in this work. In the third part, we report a long discussion on the study of formation, migration and diffusion of multivacancies Vn in the bcc-iron system. The main objective of this study is to identify and to analyze most stable configurations of multivacancies for different sizes of Vn (n=1-15) in Fe. The migration is also investigated. In the last part, we present a study of S atoms in nickel. The different sites (interstitial and substitutional sites) in solid solution of nickel-fcc and the segregation of sulfur on and in the Ni(100) and Ni(111) surfaces are discussed. The study of sulfur in the bulk shows that the atoms S occupy the substitutional sites. The S-S and S-Ni interactions are also presented. We conclude by a discussion on the segregation and the adsorption on free surfaces
Cima, Franciele Fatima. "Capacidade de combinação de genitores, parâmetros genéticos de aparência e de rendimento de tubérculos e características de qualidade funcional e industrial de clones de batata". Universidade Federal de Pelotas, 2018. http://guaiaca.ufpel.edu.br:8080/handle/prefix/4111.
Texto completoApproved for entry into archive by Aline Batista (alinehb.ufpel@gmail.com) on 2018-08-16T18:03:42Z (GMT) No. of bitstreams: 1 TESE_Francieli_Fatima_Cima.pdf: 1522443 bytes, checksum: 765fffef828845aa25396ca45a86542e (MD5)
Made available in DSpace on 2018-08-16T18:03:42Z (GMT). No. of bitstreams: 1 TESE_Francieli_Fatima_Cima.pdf: 1522443 bytes, checksum: 765fffef828845aa25396ca45a86542e (MD5) Previous issue date: 2018-06-26
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
Batatas com polpa colorida contêm altas concentrações de antioxidantes, incluindo ácidos fenólicos, antocianinas e carotenoides. Esses fitoquímicos apresentam efeitos terapêuticos e promotores da saúde humana, exercendo papel-chave na prevenção e/ou tratamento de doenças crônicas. O crescente interesse nos benefícios à saúde adquiridos através da alimentação tem contribuído para o aumento do consumo dessas batatas “especiais” e crescimento de um mercado especializado. Para atender a demanda desse nicho de mercado é imprescindível o desenvolvimento de cultivares de polpa colorida e, para o rápido progresso, é fundamental a escolha correta dos genitores e procedimentos eficientes de seleção. Nesse sentido, foram desenvolvidos três estudos. O primeiro visou estimar capacidade de combinação de clones de batata de polpa colorida e de polpa creme e amarelo claro para caracteres de aparência externa e interna e de rendimento de tubérculos. Foram avaliadas oito famílias segregantes de batata, em modelo de dialelo parcial (3x3). Verificou-se que há predomínio de efeitos aditivos de genes no controle de caracteres de aparência e de rendimento de tubérculos. O segundo estudo visou estimar parâmetros genéticos de caracteres de aparência externa e interna e de rendimento de tubérculos, e suas implicações na seleção, em uma população híbrida constituída de 12 famílias segregantes para cor da polpa. Os resultados sugerem que pode se aplicar forte pressão de seleção para os caracteres cor da película, cor predominante da polpa, cor secundária da polpa e distribuição da cor secundária, e seleção leve a moderada para profundidade de gemas, formato e aparência geral de tubérculo, na primeira geração clonal. O terceiro estudo visou caracterizar 12 clones de batata de polpa colorida quanto à concentração de compostos bioativos, caracteres de qualidade industrial e de rendimento de tubérculos. Os clones C2715-01-09, C2721-22-09 e C2743-01-09 apresentam elevadas concentrações de compostos bioativos e alta capacidade antioxidante, além de boas características de qualidade de processamento e bom potencial produtivo. O clone C2743-09-09 é o mais produtivo e possui atributos para fritura, porém apresenta teores mais baixos de compostos bioativos e atividade antioxidante mediana.
Colored fleshed potatoes contain high concentrations of antioxidants, including phenolic acids, anthocyanins and carotenoids. These phytochemicals have therapeutic effects and promoters of human health, playing a key role in the prevention and/or treatment of chronic diseases. The growing interest in the health benefits acquired through food has contributed to increase consumption of these "special" potatoes and growth of a specialized market. In order to meet the demand of this market niche, the development of colored fleshed varieties is essential, and for a fast progress it is fundamental the correct parental choice and efficient selection procedures. In this sense, three studies were developed. The first aimed to estimate combining ability of colored fleshed and cream and light yellow fleshed potato clones in the external and internal tuber appearance, and tuber yield. Eight segregating potato families were evaluated using a partial diallel design (3x3). It was verified that there is a predominance of additive effects of genes in the control of tuber appearance and yield traits. The second study aimed to estimate genetic parameters of tuber external and internal appearance and yield traits, and their implications on selection, in a hybrid population consisting of 12 segregating families for flesh color. The results suggest that a high pressure of selection can be applied to the traits color of the skin, predominant color of the flesh, secondary color of the flesh and distribution of secondary color, and mild to moderate selection for bud depth, shape and overall appearance of tuber, in the first clonal generation. The third study aimed to characterize 12 colored flesh potato clones as to the concentration of bioactive compounds, processing quality traits and tuber yield. Clones C2715-01-09, C2721-22-09 and C2743-01-09 present high concentrations of bioactive compounds and high antioxidant capacity, besides good processing quality traits and good yield potential. The clone C2743-09-09 is the most productive and has frying attributes, but presents lower levels of bioactive compounds, and medium antioxidant activity.
Machado, Gilmara de Oliveira. "Preparação e caracterização de CMC e CMC graftizada". Universidade de São Paulo, 2000. http://www.teses.usp.br/teses/disponiveis/88/88131/tde-11092001-160555/.
Texto completoThe cellulosic pulp obtained from sugar cane bagasse was used to synthesize carboxymethylcellulose (CMC), the substrate for the grafting reactions with mono and di-isocyanathes. The sugar cane bagasse was separated into fiber and non-fiber fractions that then were submitted to the pre-hydrolyses and pulping reactions (sodium hydroxide/anthraquinone and ethanol/water). After that the sodium hydroxide/anthraquinone pulp of the fiber fraction was bleached to obtain a high purity cellulosic material. This cellulose was used to obtain the sodium and lithium salts of CMC (NaCMC and LiCMC respectively). Then these samples were used for grafting reactions with commercial octadecylisocyanate and hexamethylene-diisocyanate and synthesized monoisocyanate of poly(propylene oxide). All the samples were characterized through thermal analyses (DSC/TGA), infra-red spectroscopy (IR), solid state 13C nuclear magnetic resonance (13C-NMR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The thermal analysis indicate a possible glass transition of CMC at about 65oC that decreases for to about 29oC after the grafting reaction with isocyanate. The micrographs show structural changes occurred during the several reactions confirmed by thermal analysis. The detailed analysis of IR and NMR 13C spectra of grafted samples indicated the formation of urethane bonds. Conductivity measurements of NaCMC grafted with the poly(propylene oxide) isocyanate gave the value of 10-5 S/cm at 100oC that is comparable with other polymeric solid electrolytes.
Bergamini, Jeffrey Albert. "Virterrain 3D visual earth environment simulation /". View Senior Project online:, 2003. http://srproj.lib.calpoly.edu/projects/CSC/bbergamini.
Texto completoPratt, Stephen Wells. "The design and implementations of a push down automaton simulator senior project /". Download online PDASimulator Zip file, 2004. http://srproj.lib.calpoly.edu/projects/csc/spratt/.
Texto completoPassi, Emilio C. "Bloom's taxonomy agent /". View online record:, 2000. http://srproj.lib.calpoly.edu/projects/csc/Passi%5FEmilio/.
Texto completoZanotelli, Tiago. "Técnicas multivariadas para detecção das respostas auditivas em regime permanente". Universidade Federal de Minas Gerais, 2011. http://hdl.handle.net/1843/CJTC-8T7LY6.
Texto completoA Resposta Auditiva em Regime Permanente (ASSR) é um potencial eliciado no córtex devido a uma estimulação rápida o suficiente para que a resposta a um dado estímulo sobreponha à resposta do estímulo seguinte. A detecção da ASSR tem sido utilizada na estimação de um perfil audiométrico fisiológico abrangente, principalmente em indivíduos que não podem responder aos exames convencionais. Técnicas univariadas de detecção objetiva (ORD) que utilizam informação de energia (Teste Espectral F), fase (Medida de Sincronismo de Componente - CSM) e coerência (Magnitude Quadrática da Coerência - MSC) têm sido utilizadas para identificar a ASSR. Um dos problemas do exame de ASSR é a sua duração, entre 45 e 60 minutos. A presente dissertação tem por objetivo investigar a utilização de técnicas ORD Multivariadas (MORD) para detectar a ASSR com tons AM, visando reduzir o tempo de sua detecção. As técnicas MORD utilizadas foram: a Medida de Sincronismo de Componente Múltipla (MCSM) e a Magnitude Quadrática da Coerência Múltipla (MMSC). Os sinais de EEG foram coletados de oito (8) indivíduos saudáveis em F3, F4, Fz, C3, C4, Cz, P3, P4, Pz, T3, T4 e Oz durante duas sessões de 16 minutos de estimulação auditiva com intensidades de 60 e 40 dB SPL. Em cada sessão, apresentou-se simultaneamente na orelha esquerda e na direita um estímulo constituído por quatro tons AM portadoras de 0,5, 1, 2 e 4 kHz para ambas as orelhas e modulantes de 78, 83, 88, 92 Hz para a orelha direita e 81, 85, 90, 95 Hz para a esquerda. Os resultados mostraram que, com a utilização das técnicas de MORD com cinco canais, é possível reduzir o tempo de detecção da ASSR em até 25,15% (MMSC) em relação às técnicas ORD (MSC). Assim, as técnicas de MORD se apresentam como uma ferramenta promissora, para detecção da ASSR, podendo ser utilizada para reduzir o tempo da obtenção dos limiares fisiológicos auditivos.
Claesson, Göran y Jonas Silverborn. "Multifunktionell CNC-maskin". Thesis, Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-24576.
Texto completoDoody, Aaron L. (Aaron Lee). "CNC router modernization". Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/40405.
Texto completoIncludes bibliographical references.
A large-format CNC router has been stored in the Pappalardo Laboratory wood shop for several years in an unusable state. A need assessment determined that it would be cost effective to bring the router online for use in the mechanical engineering curriculum. The router was cleaned and inspected; it was determined that the router was in sound mechanical condition. The stepper motors, control system, and power supply were also functional, but the CNC interface software was outdated. To ensure the long term viability of the router as an effective teaching tool the most cost effective solution was to upgrade the motors, control system, and CNC interface software using a package provided by the original supplier, Techno-Isel Inc. The motors, control system, and software were installed, bringing the router to a fully functional state. Dust and ejected cuttings cause a safety hazard and cleanliness problem when operating the router. An enclosure was designed and installed in order to trap the majority of debris and reduce noise levels in the workspace, and a brief user guide has been compiled to ensure safe and effective usage.
by Aaron L. Doody.
S.B.
Direne, Filho Hellinton. "MIG/MAG CCC". reponame:Repositório Institucional da UFSC, 2014. https://repositorio.ufsc.br/xmlui/handle/123456789/129663.
Texto completoMade available in DSpace on 2015-02-05T21:21:27Z (GMT). No. of bitstreams: 1 328837.pdf: 3599401 bytes, checksum: e5820867f869d6e549fde5af56c60012 (MD5) Previous issue date: 2014
Nas indústrias de petróleo e gás e de construção naval, a união entre componentes metálicos, caracterizada por grandes espessuras e soldagem multipasse, é, em sua maioria, executada de forma manual por soldadores previamente qualificados. Desta forma, a qualidade da solda está intimamente ligada à habilidade do soldador em adequar as condições do arco voltaico e da transferência metálica à junta que está sendo soldada. A obtenção de soldas com mínima formação de defeitos é principalmente agravada na soldagem do passe de raiz. Nesta situação é necessário um meticuloso controle da poça de fusão a fim de obter a penetração desejada, sem promover o escorrimento da poça, fenômeno conhecido como burn-through. Outro agravante está na preparação da junta a ser soldada, que nem sempre oferece dimensões repetitivas, apresentando irregularidades como gaps e ângulos variáveis, high-low, entre outras variações nas dimensões da junta. A influência destes defeitos sobre o passe de raiz é minimizada ao se garantir um maior controle da energia aportada à peça, proposição das tecnologias de controle da transferência por curto-circuito. Contudo, atualmente, a maioria do suprimento desta tecnologia advém de empresas de fontes de soldagem situadas no exterior. Além da escassez de informações sobre as várias soluções disponibilizadas por diferentes fabricantes, ainda, se está restrito a soluções para aplicações pré-definidas de fábrica. Dentro deste cenário é que se insere o presente trabalho. Ele aprimora uma tecnologia nacional, denominada de CCC (Curto-Circuito Controlado), com início de desenvolvimento em 1999. O objetivo é a criação de uma base sólida para o desenvolvimento e consolidação deste tipo de tecnologia em território nacional. Isto assegura melhor feedback com efetiva adaptação contínua. Por intermédio de implementações de software e hardware na fonte de soldagem, foi atingido um controle de alta dinâmica na forma de onda de corrente, na faixa dos microssegundos, além de melhorias nas rotinas de realimentação e controle das variáveis elétricas do processo. Cada fase da transferência metálica por curto-circuito foi avaliada em ensaios práticos de soldagem, resultando em maior precisão no controle da transferência das gotas e na dinâmica da poça de fusão. Foram desenvolvidos programas sinérgicos para os arames ER70S-6 de 1,0 e 1,2 mm de diâmetro, utilizando como gás de proteção uma composição de 75% de argônio e 25% de CO2. Procurando aumentar a facilidade de utilização do processo por parte do soldador, definiram-se apenas duas variáveis de regulagem para o processo CCC, a velocidade de alimentação de arame, entre 2 e 6 m/min, e o parâmetro ?a?, responsável por regulagens finas na potência. Os testes foram monitorados com auxílio de câmera de alta velocidade e sistemas de aquisições de dados. Com a utilização destas ferramentas de avaliação foi possível obter explicações concisas sobre a influência de cada fase da forma de onda de corrente na dinâmica da transferência metálica e da poça de fusão. Como resultado dos desenvolvimentos realizados neste trabalho, atualmente o processo de soldagem CCC apresenta alta regularidade na transferência metálica, baixa formação de respingos e adequado controle da poça de fusão, além de oferecer programas sinérgicos.
Abstract : In the oil and gas and shipbuilding industries, the welds between metal components are characterized by large thicknesses and multipass welding. This job is mostly performed manually by previously trained welders. Thus, the weld quality is closely linked to the ability of the welder to adjust the conditions of the arc and the metal transfer mode to the joint. Achieving healthy welds is particularly aggravated in the root pass welding. In this situation is necessary a meticulous control of weld pool in order to obtain the desired penetration without causing burn-through. Another problem is in the joint preparation, it does not always provide exact dimensions, presenting irregularities such as inconstant gaps and angles, high-low and other dimensions variations. The technologies that propose the controlled short circuit technology minimize the influence of these defects on the root pass with greater control of heat input. However, currently, most of the supply of this technology is in the international power sources, and the high-tech products stay in these regions and local industry just uses this technology. To create a solid foundation and develop this technology in Brazil, providing greater feedback with effective continuous adaptation, evolution and a potential success in the application of the process to the local industry, was planned out the main objective of this work, that is the improvement of the welding process CCC (Controlled short circuit), seeking to optimize its current waveform and the formulation of a synergistic program. Through software and hardware implementations and improvements in routines and feedback control of electrical process variables, the welding source is working in a high dynamic control of the current waveform, at a microsecond range. In experimental welding tests each phase of short circuit transfer was evaluated, resulting in greater precision in controlling the transfer of droplets and weld pool dynamics. Based on these results, were developed synergistic programs to mild steel consumables 1.0 to 1.2 mm in diameter, using protective gas as a composition of 75% argon and 25% CO 2. Seeking facilitate the use of the process by the welder, were set up just two variables for adjusting the CCC process, the wire feed speed, between 2 and 6 m / min, and the  a parameter responsible for fine adjustments in output power. The tests were monitored with high-speed camera and data acquisition systems. The use of these assessment tools enabled to obtain concise explanations of the influence of each phase of the current waveform and of metal transfer and weld pool dynamics. As a result this work, currently, the CCC welding process has high regularity of metal transfer, low spatter and good weld pool control, and provides synergistic programs.
Krejčí, Jan. "CNC řízení frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442459.
Texto completoPERSSON, LINUS y NATALIJA ZIVANOVIC. "Picasso : CNC plotter". Thesis, KTH, Mekatronik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-233002.
Texto completoI dagens samhälle används CNC-maskiner för olika ändamål. I detta projekt skapades en CNC-plotter för att analysera hur plotterns prestanda skiljer sig vid användning av två olika motorer: en DC motor kontrollerad av en potentiometer i horisontell riktning och en stegmotor i vertikal riktning. En CNC-plotter byggdes och användes för genomförande av tester för att kunna svara på forskningsfrågan. Resultaten visar att en DC motor med en potentiometer är mer exakt än en stegmotor och medelvärdet av de relativa felen i vertikala riktningen är alltid högre. Värdena skiljer sig från 1 procentenhet till 3 procentenheter. Skillnaden i prestanda för de två motorerna beror på flera faktorer och en av huvudfaktorerna anses vara det faktum att stegmotorn ibland hoppar över steg.
Kovář, Pavel. "Model CNC frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219700.
Texto completoMoštěk, Jiří. "Malý CNC stroj". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220350.
Texto completoVondrák, Jan. "Technologie CNC frézování". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228933.
Texto completoDrlík, Michal. "Souřadnicová CNC vrtačka". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229482.
Texto completoŽák, Petr. "Konstrukce CNC frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231996.
Texto completoPospíšil, Jiří. "Hobby CNC frézka". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232104.
Texto completoKalina, Vladimír. "Malá CNC frézka". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-319489.
Texto completoBeránek, Jakub. "Bezpečnost CNC brusek". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382265.
Texto completoHanulík, René. "Řízení CNC pískovačky". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413120.
Texto completoChaňo, Patrik. "Hobby CNC frézka". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416606.
Texto completoPersson, Linus y Natalija Zivanovic. "Picasso : CNC plotter". Thesis, KTH, Maskinkonstruktion (Inst.), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-230244.
Texto completoI dagens samhälle används CNC-maskiner för olika ändamål.I detta projekt skapades en CNC-plotter för att analyserahur plotterns prestanda skiljer sig vid användning avtvå olika motorer: en DC motor kontrollerad av en potentiometeri horisontell riktning och en stegmotor i vertikalriktning. En CNC-plotter byggdes och användes för genomförandeav tester för att kunna svara på forskningsfrågan.Resultaten visar att en DC motor med en potentiometer ärmer exakt än en stegmotor och medelvärdet av de relativafelen i vertikala riktningen är alltid högre. Värdena skiljersig från 1 procentenhet till 3 procentenheter. Skillnaden iprestanda för de två motorerna beror på flera faktorer ochen av huvudfaktorerna anses vara det faktum att stegmotornibland hoppar över steg.
Mravec, Filip. "Agreagační chování polysacharidů ve vodných roztocích". Doctoral thesis, Vysoké učení technické v Brně. Fakulta chemická, 2008. http://www.nusl.cz/ntk/nusl-233278.
Texto completoPark, Kyoung-Joo Jenny. "Multi-Parameter Fluorescent Analysis and Quantitative Magnetophoresis Study as Two Different Technologies to Detect and Characterize Cells and Its Various Applications as Biomarkers". The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1512018964871473.
Texto completoWeylandt, Karsten-Henrich. "Towards a functional role for human CIC-3 and human CIC-4, two members of the CIC chloride channel family". Thesis, University of Oxford, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341009.
Texto completoSoca, Guzmán Omar Paul. "Informe sobre Expediente acumulados N° 10-2004/CLC y 12/2004/CLC". Bachelor's thesis, Pontificia Universidad Católica del Perú, 2021. http://hdl.handle.net/20.500.12404/18941.
Texto completoSers, Rickard y Victor Wiberg. "Konstruktion av CNC-Router". Thesis, Örebro universitet, Institutionen för naturvetenskap och teknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-23611.
Texto completoAASS (Applied Autonomous Sensor Systems, Center for Applied Autonomous Sensor) works with research in autonomous systems. Their major application is the development of such systems for the automotive industry as well for the elderly. AASS, have a desire for a simple model of a CNC milling machine for milling smaller parts for prototyping. The focus should be on cost when precision is not of great interest. The mission is to develop a design of a CNC router with three axes with a workspace of 600x450x150mm. The machine should be able to cut soft materials such as wood, plastics as well as soft aluminum. The result is a three-axis CNC router which is driven by three stepper motors which are coupled to respective ball screw. The Cnc router has a workspace of about 600x450x150mm. It is capable of cutting with cutting forces up to 150N without deformations that will produce large errors in values of processed detail. The design consists of main body of aluminum profiles available at Örebro University. The movable parts consist of Quadro Tables manufactured by Rollco. The design provides a good solution to a relatively low cost.
Mitáš, Daniel. "Ovládací rozhraní CNC frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219821.
Texto completoPodloucký, Milan. "Konstrukce malého CNC soustruhu". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230138.
Texto completoJagoš, Roman. "Konstrukce malé CNC frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230234.
Texto completoSobotka, Ondřej. "Návrh CNC řídicího systému". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231279.
Texto completoCherepanov, Maksym. "Ruční programovaní CNC strojů". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317201.
Texto completoKučera, David. "CNC obrábění rotační součásti". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417437.
Texto completoBuš, Martin. "Návrh hobby CNC frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417754.
Texto completoGuedes, Vagner. "CARACTERIZAÇÃO FÍSICO-QUÍMICA DO LODO GERADO NUM SISTEMA ANAERÓBICO DE TRATAMENTO DE EFLUENTES DE ORIGEM RESIDENCIAL". UNIVERSIDADE ESTADUAL DE PONTA GROSSA, 2013. http://tede2.uepg.br/jspui/handle/prefix/2112.
Texto completoTo avoid pollution and damage to the environment, Effluents need of treatment. The appropriate target these effluents should be the (STP), which are responsible for the removal of contaminants. The wastewater treatment plants seek to apply the same natural principles, using the same organisms that proliferate in soil and water, improving processes and minimizing costs to get the highest possible efficiency and can use aerobic or anaerobic processes. There is worldwide increasing production of waste, among which stands out the sewage sludge, generated by the sheer volume and complexity of management, which typically involves several processing steps. Chemical study was made of the sludge from the sludge blanket reactor (UASB) during the period of one year, using as the main techniques Fluorescence X-ray Absorption Spectroscopy Atomic Emission Spectroscopy for Flame, UV-vis spectroscopy and metal extraction by Tessier method, the parameters analyzed were pH, cation exchange capacity, sum of bases, exchangeable acidity, potassium, phosphorus mineral, organic phosphorus, nitrogen and metals: barium, cadmium, lead, copper, chromium, iron , nickel, manganese, silver, and zinc. x
Os efluentes necessitam de tratamento, evitando a poluição e os danos causados ao ambiente. O destino adequado destes efluentes deve ser a (ETE), que são responsáveis pela remoção dos contaminantes. As estações de tratamento de efluentes procuram aplicar os mesmos princípios naturais, utilizando os mesmos organismos que proliferam no solo e na água, melhorando os processos e minimizando custos para obter a maior eficiência possível, podendo utilizar os processos aeróbios ou anaeróbios. Verifica-se em todo mundo a produção crescente de resíduos urbanos, entre os quais se destaca o lodo de esgoto, pelo grande volume gerado e pela complexidade de gerenciamento, que normalmente envolve diversas etapas de processamento. Fez-se estudo químico do lodo proveniente do reator de manto de lodo, (UASB) durante o período de um ano, utilizando como técnicas principais a Fluorescência de raios X, Espectroscopia de Absorção Atômica, Espectroscopia Emissão pela Chama, Espectroscopia UV-vis e Extração de metais pelo Método de Tessier, os atributos analisados foram pH, capacidade de troca catiônica, soma total das bases, acidez trocável, potássio, fósforo mineral, fósforo orgânico, nitrogênio e metais: bário, cadmio, chumbo, cobre, cromo, ferro, níquel, manganês, prata e zinco.
Wallberg, Elin y Amanda Wallberg. "En kväll på Karlstad CCC". Thesis, Karlstads universitet, Fakulteten för ekonomi, kommunikation och IT, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-14442.
Texto completoCleary, Matthew John. "CMC Modelling of Enclosure Fires". University of Sydney. Aerospace, Mechanical and Mechatronic Engineering, 2005. http://hdl.handle.net/2123/696.
Texto completoRautava, J. P. (Jori-Pekka). "CNC-jyrsimen tärinän mittaus värinäsensorilla". Bachelor's thesis, University of Oulu, 2017. http://urn.fi/URN:NBN:fi:oulu-201710072962.
Texto completoIn the beginning of this thesis I make a literature overview of the basics of LTE technology and the possibilities of 5G technology and IoT applications. In the theory part I review what makes LTE technology and what are the key principles that allow greater data rates compared to 3G. The very basics of 5G technology is introduced. I also review why 5G technology allows greater data rates and lower latency compared to 4G technology. In the end of this thesis I present IoT application I have made that allows to examine vibration from CNC milling machine. For measuring the vibration ADIS16227 vibration sensor is connected with Raspberry Pi computer. Finally, I consider what can be done with this IoT application and what constraints it may have
Pérez, Cosavalente Carlos Enrique. "Consulting report - CAC Oro Verde". Master's thesis, Pontificia Universidad Católica del Perú, 2017. http://tesis.pucp.edu.pe/repositorio/handle/123456789/9412.
Texto completoCAC Oro Verde es una cooperativa peruana ubicada en la región de San Martín, Perú con mucho interés en explorar el mercado nicho canadiense de cacao. Así, el principal objetivo del proyecto de consultoría es identificar y desarrollar una oportunidad de negocio viable en este mercado. Para ello, se evaluó y planteó una estrategia de marketing, un marketing mix y se realizó una evaluación financiera con el fin de determinar una solución viable que pueda ser implementada. A través de este estudio, se identificó que la mejor oportunidad de negocio y mercado nicho para la cooperativa se encontraba en el mercado de cacaos de fino aroma que cuentan con certificaciones de comercio justo y orgánico. Asimismo, tomando en cuenta las necesidades del mercado y las posibilidades de producción de la cooperativa, se eligió al segmento bean-to-bar como el mercado a penetrar. Del mismo modo, se identificó que exportar directamente hacia socios comerciales es el mejor método de entrada hacia la provincia elegida, British Columbia. Por otro lado, el marketing mix propuesto se desplegó en un plan de implementación cuyo costo y duración estimados son 109,000 USD y 30 semanas, respectivamente. Debido a que el producto ofrecido es considerado de alta calidad y, tomando en cuenta otros puntos de referencia en cuanto al precio del producto, se determinó que el rango más aproximado de precio sugerido es desde 5,000 USD a 6,500 USD. A partir de ello, se realizó la evaluación financiera a 18 diferentes escenarios variando el precio y la cuota de mercado posible de alcanzar. De ese análisis, se determinó que el punto de equilibrio se alcanza cuando la cuota de mercado es entre 4.9% y 6.1% de la demanda, es decir, desde 8.9 TNE a 11 TNE vendidas por año. En el mejor escenario, CAC Oro Verde es capaz de lograr utilidades netas por 530,000 PEN en el primer año si es que se logra alcanzar una cuota de mercado de 20% lo que en cinco años significaría un valor presente neto de 3’400,000 PEN y una tasa interna de retorno de 192.4% demostrando que el proyecto es viable y factible
Tesis
Matoušek, Vojtěch. "Návrh a řízení CNC stroje". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218945.
Texto completoVlček, Michal. "Integrace měření do CNC obrábění". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229070.
Texto completoMichele, Jiří. "Konstrukce malé vertikální CNC frézky". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230492.
Texto completo