Literatura académica sobre el tema "Characterization of sensors"
Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros
Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Characterization of sensors".
Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.
También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.
Artículos de revistas sobre el tema "Characterization of sensors"
Giurgiutiu, Victor y Andrei N. Zagrai. "Characterization of Piezoelectric Wafer Active Sensors". Journal of Intelligent Material Systems and Structures 11, n.º 12 (diciembre de 2000): 959–76. http://dx.doi.org/10.1106/a1hu-23jd-m5au-engw.
Texto completoPetrović, Davor y Željko Barač. "Different Sensor Systems for the Application of Variable Rate Technology in Permanent Crops". Tehnički glasnik 12, n.º 3 (25 de septiembre de 2018): 188–95. http://dx.doi.org/10.31803/tg-20180213125928.
Texto completoAijazi, A. K., L. Malaterre, L. Trassoudaine y P. Checchin. "SYSTEMATIC EVALUATION AND CHARACTERIZATION OF 3D SOLID STATE LIDAR SENSORS FOR AUTONOMOUS GROUND VEHICLES". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLIII-B1-2020 (6 de agosto de 2020): 199–203. http://dx.doi.org/10.5194/isprs-archives-xliii-b1-2020-199-2020.
Texto completoYulianti, Ian, Ngurah Made Darma Putra, Fianti Fianti, Abu Sahmah Mohd Supa’at, Helvi Rumiana, Siti Maimanah y Kukuh Eka Kurniansyah. "Characterization of Temperature Response of Asymmetric Tapered-Plastic Optical Fiber-Mach Zehnder Interferometer". Jurnal Penelitian Fisika dan Aplikasinya (JPFA) 10, n.º 1 (14 de julio de 2020): 34. http://dx.doi.org/10.26740/jpfa.v10n1.p34-43.
Texto completoGrima, Adrian, Mario Di Castro, Alessandro Masi y Nicholas Sammut. "Frequency response characterization of ironless inductive position sensors with long cables". MATEC Web of Conferences 208 (2018): 03007. http://dx.doi.org/10.1051/matecconf/201820803007.
Texto completoNouri, Hanen, Dhivakar Rajendran, Rajarajan Ramalingame y Olfa Kanoun. "Homogeneity Characterization of Textile-Integrated Wearable Sensors based on Impedance Spectroscopy". Sensors 22, n.º 17 (30 de agosto de 2022): 6530. http://dx.doi.org/10.3390/s22176530.
Texto completoVivek, A., K. Shambavi y Zachariah C. Alex. "A review: metamaterial sensors for material characterization". Sensor Review 39, n.º 3 (20 de mayo de 2019): 417–32. http://dx.doi.org/10.1108/sr-06-2018-0152.
Texto completoMoreno, Javier, Eduard Clotet, Dani Martínez, Marcel Tresanchez, Tomàs Pallejà y Jordi Palacín. "Experimental Characterization of the Twin-Eye Laser Mouse Sensor". Journal of Sensors 2016 (2016): 1–8. http://dx.doi.org/10.1155/2016/4281397.
Texto completoBanothu, Akhil Naik, Vinay Budhraja, Prabha Sundaravadivel, Reginald Fletcher y Krishna Reddy. "Design and Characterization of Printed Flexible Humidity Sensor". ECS Transactions 113, n.º 13 (17 de mayo de 2024): 27–34. http://dx.doi.org/10.1149/11313.0027ecst.
Texto completoXu, Hong Yan, Xing Qiao Chen, Ling Zhan Fang y Bing Qiang Cao. "Preparation and Characterization of Cerium-Doped Tin Oxide Gas Sensors". Advanced Materials Research 306-307 (agosto de 2011): 1450–55. http://dx.doi.org/10.4028/www.scientific.net/amr.306-307.1450.
Texto completoTesis sobre el tema "Characterization of sensors"
Petitdidier, Nils. "LSST: Characterization of the CCD sensors". Thesis, KTH, Tillämpad fysik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-168008.
Texto completoHughes, Höglund Joshua. "Bed-time sensors - characterization and comparison". Thesis, Uppsala universitet, Avdelningen för datorteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-371795.
Texto completoBlank, Kerstin. "Molecular force sensors design, characterization and applications /". Diss., [S.l.] : [s.n.], 2006. http://edoc.ub.uni-muenchen.de/archive/00006085.
Texto completoLOMBARDO, LUCA. "Development and characterization of sensors for human health". Doctoral thesis, Politecnico di Torino, 2019. http://hdl.handle.net/11583/2774813.
Texto completoAnnanouch, Fatima Ezahra. "Design, Optimization and Characterization of Metal Oxide Nanowire Sensors". Doctoral thesis, Universitat Rovira i Virgili, 2015. http://hdl.handle.net/10803/352214.
Texto completoEn esta tesis, he estudiado y desarrollado un método de deposición química en fase vapor asistido por aerosol (AACVD), para el crecimiento directo de nanoagujas de óxido de tungsteno funcionalizadas o intrínsecas. Los depósitos se han realizado sobre distintos sustratos transdcutores para su aplicación a la detección de gases. Esta técnica ofrece la posibilidad de co-depositar los metales con los óxidos metálicos empleando una sola etapa de deposición. La síntesis del material nanoestructurado, la fabricación del dispositivo, la caracterización de los materiales y la detección de gases han sido investigadas. El método AACVD se empleó para el crecimiento y la integración directa de la película de sensible sobre sustratos cerámicos (alúmina), MEMS (micro hotplates) y poliméricos flexibles, lo que demuestra su compatibilidad e idoneidad para el crecimiento de nanoestructuras de óxido metálicos sobre una amplia gama de sustratos transductores. Además, el método AACVD se ha implementado también en un reactor de pared fría para crecer las nanoestructuras de WO3, empleando el calentamiento localizado que permiten conseguir las microresistencias calefactoras integradas en algunos de los transductores empleados. Todas las películas sintetizadas en esta tesis doctoral se componían de nanoagujas de WO3 puro o de WO3 funcionalizado con nanopartículas de oro (Au), platino (Pt), óxido de cobre (Cu2O) o paladio (Pd). Se utilizaron diversas tecnologías de análisis para caracterizar la morfología, la estructura y la composición de las películas producidas. Los resultados mostraron que nuestro método es eficaz para el crecimiento de nanoagujas cristalinas de WO3 decoradas con nanopartículas de metales / óxidos metálicos, a temperaturas moderadas (es decir, 380 ° C), con eficacia en sus costes y con tiempos de fabricación cortos, directamente sobre el elemento trasndcutor con vistas a obtener sensores de gases. Los estudios de detección de gases han mostrado que este nanomaterial híbrido tiene una excelente sensibilidad y selectividad en comparación con muestras de WO3 puro. Además, los nanocompuestos Cu2O / WO3 y Pd / WO3 han demostrado poseer una excelente sensibilidad y selectividad hacia los gases H2S y H2, respectivamente.
In this thesis, I have studied and developed aerosol assisted chemical vapour deposition (AACVD) methods for the direct growth of non-functionalized and functionalized tungsten oxide nanoneedles, onto different transducer substrates, for gas sensing applications. This technique gives the possibility to co-deposit metals with metal oxides nanostructures within a single step deposition. The nanostructured material synthesis, device fabrication, material characterization and gas sensing performance have been investigated. AACVD method was employed for the direct growth and integration of the sensing film onto ceramic (alumina), MEMS (silicon micro hotplates) and flexible polymeric substrates, demonstrating its compatibility and suitability for growing metal oxide nanostructures onto a wide spectrum of sensor substrates. Furthermore, AACVD based on the localized heating of substrates employing their embedded resistive microheaters has been also performed and developed for the growth of WO3 nanostructures, using a cold wall reactor. All the synthesized films used in this doctoral thesis were composed of pure WO3 nanoneedles or WO3 nanoneedles functionalized with either gold (Au), platinum (Pt), cuprous oxide (Cu2O) or palladium (Pd) nanoparticles. Various analytical techniques were used to characterize the morphology, the structure and the composition of the produced films. The results showed that our method is effective for growing single crystalline WO3 nanoneedles decorated with metals/metal oxides nanoparticles at moderate temperatures (i.e., 380 °C), with cost effectiveness and short fabrication times, directly onto transducers in view of obtaining gas sensors. The gas sensing studies performed showed that these hybrid nanomaterials have excellent sensitivity and selectivity compared to pristine WO3 samples. Cu2O/WO3 and Pd/WO3 nanocomposites have shown excellent sensitivity and selectivity toward H2S and H2 gases respectively.
Griffiths, David John. "Development of Ionic Polymer Metallic Composites as sensors". Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/35676.
Texto completoMaster of Science
Tsolov, Peter. "Design, fabrication and characterization of thick-film gas sensors". Doctoral thesis, Universitat Rovira i Virgili, 2004. http://hdl.handle.net/10803/8450.
Texto completoTítulo: Diseño, fabricación y caracterización de sensores de capa gruesa
Doctorando: Peter Tsolov Ivanov
Director: Xavier Correig Blanchar
Los sensores de gases de estado sólido han demostrado ser muy prometedores para
supervisar la emisión de los agentes contaminadores en el aire, porque son una opción
de bajo coste para la construcción de analizadores de gases. Algunos problemas se
relacionados con este tipo de dispositivos, especialmente su baja selectividad y el alto
consumo de energía, siguen sin resolver. El objetivo de esta tesis doctoral es el
desarrollo de nuevos sensores y matrices de sensores con mejorada selectividad y
reducido consumo de energía.
La metodología usada en esta tesis consiste en fabricar matrices de sensores hechas de
sensores con distintas selectividades. Como la respuesta del sensor es diferente en
distintas temperaturas de trabajo y como los distintos dopantes o los filtros catalíticos
aceleran o reducen la respuesta del sensor, los diferentes sensores dan diferentes
reacciones. Combinando estas reacciones y con la ayuda de técnicas del reconocimiento
de patrones, se pueden crear grupos de sensores capaces de distinguir entre distintos
agentes contaminantes.
La tesis comienza repasando los métodos usados para la fabricación de los sensores de
gases y discutiendo los problemas relacionados con la baja selectividad de los óxidos
metálicos. Se especifican también los diferentes métodos para aumentar la selectividad.
Se introduce y se describe detalladamente la técnica de screen-printing. Los
experimentos se realizaron con cuatro tipos de substratos de sensores (cerámica, silicio,
microhotplate y silicon-on-insulator) y con más de 15 capas activas basadas en dióxido
de estaño y trióxido de tungsteno (puras y dopadas con oro, platino, plata, titanio y
paladio). Una amplia variedad de compuestos volátiles (amoníaco, etanol, acetona y
benceno), de gases (monóxido de carbono, dióxido de nitrógeno, metano y sulfuro de
PhD thesis of Peter Tsolov Ivanov Resumen de la tesis doctoral
hidrógeno) y de algunas mezclas binarias ha sido medida. Los resultados obtenidos por
los análisis cuantitativos y cualitativos de los gases estudiados con una matriz de
sensores basada en cuatro sensores simples nos han llevado a descubrir el óptimo
sensor/matriz para los distintos gases/mezclas binarias.
Los resultados demostraron que, con la ayuda de redes neuronales Fuzzy ARTMAP, es
posible identificar y cuantificar simultáneamente los gases analizados usando solamente
una matriz de microhotplates (cuatro sensores) con la misma capa activa. Los sensores
de SnO2 y de WO3 dopados demostraron diversa respuesta a los agentes contaminantes
probados. Componiendo cuidadosamente la matriz de sensores y definiendo bien la
temperatura de trabajo podemos discriminar, con un alto grado de éxito, los diversos
gases probados sin la necesidad de técnicas de reconocimiento de patrones.
La conclusión principal que se puede sacar de esta tesis es que las matrices de sensores,
junto con las técnicas de reconocimiento de patrones, se pueden utilizar para aumentar
perceptiblemente la selectividad de los sensores de óxidos metálicos. La simplicidad de
los métodos propuestos permite su uso en el desarrollo de analizadores de gases más
baratos y narices electrónicas portátiles.
A partir de la investigación realizada durante esta tesis doctoral se han elaborado 15
artículos publicados en revistas internacionales, 10 comunicaciones en las conferencias
internacionales y 3 comunicaciones en conferencias españolas.
PhD thesis of Peter Tsolov Ivanov Resume of the doctoral thesis
OF THE DOCTORAL THESIS
Title: Design, Fabrication and Characterization of Thick-Film Gas Sensors
Doctorate: Peter Tsolov Ivanov
Director: Xavier Correig Blanchar
Solid-state gas sensors have proved to be very promising for monitoring the emission of
air pollutants because they are a low cost option for constructing gas analysers. Some
problems associated to this approach, especially their deficient selectivity and high
power consumption, remain unsolved. The aim of this doctoral thesis is to develop new
sensors and sensor matrices that can improve the selectivity of metal oxide gas sensors
and decrease their power consumption.
The methodology used here consists of creating sensor matrices made from sensors with
different selectivities. As the sensor response is different at different working
temperatures and as the different dopants or catalytic filters accelerate or reduce the
sensor response, the different sensors give different reactions. If these reactions are
combined, sensor groups capable of discriminating between different pollutants can be
obtained with the help of pattern recognition techniques.
The thesis begins by reviewing the methods used for fabricating gas sensors and
discussing the problems caused by the poor selectivity of metal oxide gas sensors and
the methods for increasing their selectivity. Then, the screen-printing technique is
introduced and described. The experiments were performed with four different types of
gas sensor substrates (ceramic, silicon, microhotplate and silicon-on-insulator) and more
than 15 active layers (undoped and doped with gold, platinum, silver, titanium and
paladium tin dioxide and tungsten trioxide sensitive layers). A wide variety of volatile
compounds (ammonia, ethanol, acetone and benzene), gases (carbon monoxide,
nitrogen dioxide, methane and hydrogen sulphide) and some binary mixtures were
measured. The results obtained from quantitative and qualitative gas analysis using the
PhD thesis of Peter Tsolov Ivanov Resume of the doctoral thesis
sensor response from a simple 4 sensor based matrix led to the optimal sensor/sensor
matrix for gas/binary mixtures.
The results showed that, with the help of fuzzy ARTMAP neural networks, it is possible
to identify and simultaneously quantify the gases analysed by using only one MHP-chip
(four sensors) with the same active layer. The doped SnO2 and WO3 sensors showed
different response to the tested pollutants. Composing carefully the sensor matrix and
defining well the working temperature we were able to discriminate, with a high success
rate, between the different test gases with no need for pattern recognition techniques.
The main conclusion that can be drawn from this thesis is that sensor matrices can be
used, coupled to dynamic pattern recognition techniques, to significantly increase the
selectivity of metal oxide sensors. The simplicity of the methods implemented makes
them suitable for developing low-cost gas analysers and hand-held e-noses.
The research carried out during this doctoral thesis resulted in 15 articles being
published in international journals, 10 communications at international conferences and
3 communications at a Spanish national conference.
PhD thesis of Peter Tsolov Ivanov Resumen de la tesis doctoral
Unander, Tomas. "Characterization of Low Cost Printed Sensors for Smart Packaging". Licentiate thesis, Mid Sweden University, Department of Information Technology and Media, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-7049.
Texto completoCurrently there are very significant interests in printed electronics in the world. The possibility to produce electronics in a roll to roll printing process will considerably reduce the cost of the electronic devices. However, these new devices will most probably not replace the traditional silicon based electronics, but will be a complement in low cost applications such as in intelligent packages and other printable media. One interesting area is printable low cost sensors that add value to packages. In this thesis a study of the performance of low cost sensors is presented. The sensors were fabricated using commercial printing processes used in the graphical printing business. The sensors were characterized and evaluated for the intended application. The evaluated sensors were moisture sensing sensor solutions and touch sensitive sensor solutions.
A printable touch sensitive sensor solution is presented where the sensor is incorporated into a high quality image such as in point of sales displays. The sensor solution showed good touch sensitivity at a variety of humidity levels. Four printed moisture sensor concepts are presented and characterized. Firstly, a moisture sensor that shows good correlation to the moisture content of cellulose based substrates. Secondly, a sensor that measures the relative humidity in the air, the sensor has a measuring accuracy of 0.22% at high relative humidity levels. Thirdly, a moisture sensor that utilizes unsintered silver nano-particles to measure the relative humidity in the air, the sensor has a linear response at very low relative humidity levels. And fourth, an action activated energy cell that provides power when activated by moisture. A concept of remote moisture sensing that utilizes ordinary low cost RFID tags has also been presented and characterized. The remote sensor solution works both with passive and semi-passive RFID systems. The study shows that it is possible to manufacture low cost sensors in commercial printing processes.
Det är för närvarande ett stort intresse för tryckt elektronik. Att kunna tillverka elektroniska komponenter i en rulle till rulle process möjliggör en reducering av tillverkningskostnaden. Dessa nya komponenter kommer sannolikt inte konkurrera ut den traditionella kiselbaserade elektroniken utan kommer att kunna komplimentera kiselelektronik i segment där kostnaden är väldigt viktig som i intelligenta förpackningar och andra tryckta medier. Ett intressant område är tryckta sensorer som kan addera värde till förpackningar. I denna avhandling presenteras en studie kring tryckta sensorer som kan tillverkas till låg kostnad. Sensorerna är tillverkade i kommersiella grafiska tryckpressar. Sensorerna karakteriseras och utvärderas för de applikationer som de är tänkta för. I denna avhandling har fuktsensorer och beröringskänsliga sensorer undersökts.
Det presenteras en tryckt beröringskänslig sensor som integreras i ett högkvalitativt grafiskt tryck. Denna sensor är tänkt att användas i reklamskyltar för att skapa interaktivitet. Sensorn har en bra känslighet vid varierande fukthalter. Även fyra fuktsensorer presenteras och utvärderas. Den första sensorn mäter fukthalten i cellulosabaserade substrat och visar en bra korrelation till fukthalten i substratet. Den andra sensorn mäter den relativa fukten i luften, denna sensor har en mätnoggrannhet på 0.22% för höga fukthalter. Den tredje sensorn använder partiklar i nanostorlek för att mäta fukthalten i luften. Denna sensor fungerar väldigt bra vid låga fukthalter. Den fjärde sensorn är en energicell som producerar el när den blir fuktig. Även en fuktsensor som kan läsas av på håll utvärderas. Detta sensorkoncept är baserad på vanliga RFID taggar och kan användas med både passiva och semi-passiva taggar. Denna avhandling visar att det är möjligt att tillverka sensorer till en låg kostnad in en traditionell grafisk tryckpress.
Wang, Xiaozhen. "Characterization of Fiber Tapers for Fiber Devices and Sensors". Thèse, Université d'Ottawa / University of Ottawa, 2012. http://hdl.handle.net/10393/23330.
Texto completoLee, Hsiao-Yen. "Synthesis and characterization of nano-sructured materials for sensors". Thesis, University of Leeds, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.505052.
Texto completoLibros sobre el tema "Characterization of sensors"
O, Claus Richard y United States. National Aeronautics and Space Administration., eds. Optical fiber sensors for materials and structures characterization. [Washington, DC: National Aeronautics and Space Administration, 1991.
Buscar texto completoPopović, R. S. Hall effect devices: Magnetic sensors and characterization of semiconductors. Bristol, England: A. Hilger, 1991.
Buscar texto completoShams, Qamar A. Characterization of polymer-coated MEMS humidity sensors for flight applications. Hampton, VA: National Aeronautics and Space Administration, Langley Research Center, 2003.
Buscar texto completoC, Stone David, ed. Surface-launched acoustic wave sensors: Chemical sensing and thin-film characterization. New York: Wiley, 1997.
Buscar texto completo1926-, Tsuchiya Kiyoshi y World Space Congress (2nd : 2002 : Houston, Texas), eds. Calibration, characterization of satellite sensors, physical parameters derived from satellite data. Kidlington, Oxford: Published for the Committee on Space Research [by] Pergamon, 2003.
Buscar texto completoAmorphous silicon carbide thin films: Deposition, characterization, etching, and piezoresistive sensors applications. Hauppauge, N.Y: Nova Science Publishers, 2011.
Buscar texto completoL, Barker John y United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, eds. Landsat-4 science characterization early results. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.
Buscar texto completoN, Kumta Prashant y American Ceramic Society Meeting, eds. Processing and characterization of electrochemical materials and devices. Westerville, Ohio: American Ceramic Society, 2000.
Buscar texto completoShimoda, Haruhisa, Xiaoxiong Xiong y Choen Kim. Earth observing missions and sensors: Development, implementation, and characterization : 13-14 October 2010, Incheon, Korea, Republic of. Editado por SPIE (Society) y Han'guk Haeyang Yŏn'guwŏn. Bellingham, Wash: SPIE, 2010.
Buscar texto completoShimoda, Haruhisa. Earth observing missions and sensors: Development, implementation, and characterization II : 30 October-1 November 2012, Kyoto, Japan. Editado por SPIE (Society). Bellingham, Washington: SPIE, 2012.
Buscar texto completoCapítulos de libros sobre el tema "Characterization of sensors"
Gupta, Ankur y Gulshan Verma. "Characterization of Nanomaterials". En Nanostructured Gas Sensors, 25–63. New York: Jenny Stanford Publishing, 2022. http://dx.doi.org/10.1201/9781003331230-2.
Texto completoFerrari, Paolo, Luca Lamagna y Francesco Daniele Revello. "Thin Films Characterization and Metrology". En Silicon Sensors and Actuators, 105–32. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-80135-9_4.
Texto completoFatimah, Is, Gani Purwiandono, Ganjar Fadillah y Wiyogo Prio Wicaksono. "Functional Nanomaterials for Characterization Techniques". En Functional Nanomaterials for Sensors, 39–59. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003263852-3.
Texto completoRupitsch, Stefan Johann. "Characterization of Sensor and Actuator Materials". En Piezoelectric Sensors and Actuators, 127–93. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57534-5_5.
Texto completoKim, Jung-Keun, Chang-Soo Lee y Eunji Lee. "Smart Vesicles: Synthesis, Characterization and Applications". En Smart Membranes and Sensors, 53–103. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781119028642.ch3.
Texto completoYahyazadeh, Arash y Alivia Mukherjee. "Functionalization and Characterization of Carbon Nanotubes". En Carbon Nanotube-Based Sensors, 44–67. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003376071-3.
Texto completoCeccone, Giacomo, D. Gilliland y Wilhelm Kulisch. "Surface Analytical Characterization of Biosensor Materials". En Nanotechnological Basis for Advanced Sensors, 81–102. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-0903-4_10.
Texto completoRupitsch, Stefan Johann. "Characterization of Sound Fields Generated by Ultrasonic Transducers". En Piezoelectric Sensors and Actuators, 341–406. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57534-5_8.
Texto completoAyyanar, C. Balaji, K. Marimuthu y B. Gayathri. "Characterization of Syzygium cumini Particulates-Filled Epoxy Composites". En Intelligent Technologies for Sensors, 39–44. New York: Apple Academic Press, 2023. http://dx.doi.org/10.1201/9781003314851-5.
Texto completoPang, Lingyan, Xiao Jia, Jiaojiao Gao y Hui Liu. "Self-Assembly and Fabrication of Biomaterials onto Transducers and Their Characterization". En Biomaterials-Based Sensors, 127–75. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8501-0_5.
Texto completoActas de conferencias sobre el tema "Characterization of sensors"
Phillips, David M., Keith A. Slinker, Cody W. Ray, Benjamin J. Hagen, Jeffery W. Baur, Benjamin T. Dickinson y Gregory W. Reich. "Artificial Hair Sensors: Electro-Mechanical Characterization". En ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/smasis2014-7707.
Texto completoSheiretov, Yanko, Leslie Evans, Darrell Schlicker, Vladimir Zilberstein, Neil Goldfine y Ruth Sikorski. "TBC Characterization Using Magnetic and Electric Field Sensors". En ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-27526.
Texto completoCarvalho, V., F. Soares, M. Belsley y R. M. Vasconcelos. "Automatic yarn characterization system". En 2008 IEEE Sensors. IEEE, 2008. http://dx.doi.org/10.1109/icsens.2008.4716557.
Texto completoSheridan, Eoin, Mohammad Amanzadeh, Saiied M. Aminossadati, Mehmet S. Kizil y Warwick P. Bowen. "Fibre Microfabrication and Characterization for Gas Sensing". En Optical Sensors. Washington, D.C.: OSA, 2012. http://dx.doi.org/10.1364/sensors.2012.stu2f.3.
Texto completoPeiner, Erwin y Lutz Doering. "Characterization of diesel injectors using piezoresistive sensors". En 2010 Ninth IEEE Sensors Conference (SENSORS 2010). IEEE, 2010. http://dx.doi.org/10.1109/icsens.2010.5690341.
Texto completoGao, Zhaolin, Matthew J. Danley, Jack T. Kloster, Victor K. Lai y Ping Zhao. "Characterization of Nanoporous Polyvinylidene Fluoride (PVDF) Sensors Under Tensile Loading". En ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/smasis2021-67462.
Texto completoFerrara, Giovanni, Lorenzo Ferrari y Gabriele Sonni. "Experimental Characterization of a Remoting System for Dynamic Pressure Sensors". En ASME Turbo Expo 2005: Power for Land, Sea, and Air. ASMEDC, 2005. http://dx.doi.org/10.1115/gt2005-68733.
Texto completoNüssler, Dirk, Christian Krebs y Ralf Brauns. "Detection of non-metallic impurities and defects through radar measurements". En OCM 2013 - Optical Characterization of Materials. KIT Scientific Publishing, 2013. http://dx.doi.org/10.58895/ksp/1000032143-14.
Texto completoLefebvre, Paul, Andre Vincelette, Peter Ficocelli, Sebastien Allard y Sylvie Carbonneau. "Reliability Characterization of Fiber Bragg Grating". En Optical Fiber Sensors. Washington, D.C.: OSA, 2006. http://dx.doi.org/10.1364/ofs.2006.md6.
Texto completoRupitsch, Stefan J. "Simulation-based characterization of piezoceramic materials". En 2016 IEEE SENSORS. IEEE, 2016. http://dx.doi.org/10.1109/icsens.2016.7808757.
Texto completoInformes sobre el tema "Characterization of sensors"
Thundat, Thomas G., Zhiyu Hu, Gilbert M. Brown y Baohua Gu. Microcantilever Sensors for In-Situ Subsurface Characterization. Office of Scientific and Technical Information (OSTI), junio de 2006. http://dx.doi.org/10.2172/895615.
Texto completoFonseca, Michael A., Jennifer M. English, Martin Von Arx y Mark G. Allen. High Temperature Characterization of Ceramic Pressure Sensors. Fort Belvoir, VA: Defense Technical Information Center, enero de 2001. http://dx.doi.org/10.21236/ada463252.
Texto completoHolman, Rob. Robust Littoral Characterization using Electro-Optical Sensors. Fort Belvoir, VA: Defense Technical Information Center, septiembre de 2011. http://dx.doi.org/10.21236/ada557166.
Texto completoIsrael, Scott y Zoltan Gecse. Characterization of Silicon Sensors for HGCal in CMS. Office of Scientific and Technical Information (OSTI), julio de 2019. http://dx.doi.org/10.2172/1614730.
Texto completoCampanella, Michael, Maral Alyari y Ron Lipton. Characterization of CMS High Granularity Calorimeter Silicon Sensors. Office of Scientific and Technical Information (OSTI), agosto de 2019. http://dx.doi.org/10.2172/1623362.
Texto completoFink, Bruce K., Mahendra B. Dorairaj, John W. Gillespie y Jr. Vinyl-Ester (VE) Cure Characterization Via Direct Current Sensors. Fort Belvoir, VA: Defense Technical Information Center, marzo de 2001. http://dx.doi.org/10.21236/ada392622.
Texto completoClausen, Jay, Richard Hark, Russ Harmon, John Plumer, Samuel Beal y Meghan Bishop. A comparison of handheld field chemical sensors for soil characterization with a focus on LIBS. Engineer Research and Development Center (U.S.), febrero de 2022. http://dx.doi.org/10.21079/11681/43282.
Texto completoGanguly, Suman. Experimental Demonstration of Underground Structure Characterization Using Sensitive Magnetic Sensors. Fort Belvoir, VA: Defense Technical Information Center, enero de 1999. http://dx.doi.org/10.21236/ada399347.
Texto completoGanguly, Suman. Experimental Demonstration of Underground Structure Characterization Using Sensitive Magnetic Sensors. Fort Belvoir, VA: Defense Technical Information Center, noviembre de 2000. http://dx.doi.org/10.21236/ada406535.
Texto completoNguyen, Q. H. Vendors search for viscosity sensors for in situ tank waste characterization. Office of Scientific and Technical Information (OSTI), octubre de 1994. http://dx.doi.org/10.2172/10192394.
Texto completo