Bibliografías temáticas / CAD

Literatura académica sobre el tema "CAD"

Autor: Grafiati
Publicado: 4 de junio de 2021
Última modificación: 29 de julio de 2024

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Índice

Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "CAD".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Artículos de revistas sobre el tema "CAD"

1

KASE, Kiwamu. "An Introduction of Outline of CAD/CAE/CAM/CAT (1)". Journal of the Japan Society for Precision Engineering 79, n.º 2 (2013): 144–47. http://dx.doi.org/10.2493/jjspe.79.144.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

KASE, Kiwamu. "An Introduction of Outline of CAD/CAE/CAM/CAT (2)". Journal of the Japan Society for Precision Engineering 79, n.º 3 (2013): 223–26. http://dx.doi.org/10.2493/jjspe.79.223.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

KASE, Kiwamu. "An Introduction of Outline of CAD/CAE/CAM/CAT (3)". Journal of the Japan Society for Precision Engineering 79, n.º 4 (2013): 309–13. http://dx.doi.org/10.2493/jjspe.79.309.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Netto, Jeffrey, Andrej Teren, Ralph Burkhardt, Anja Willenberg, Frank Beutner, Sylvia Henger, Gerhard Schuler et al. "Biomarkers for Non-Invasive Stratification of Coronary Artery Disease and Prognostic Impact on Long-Term Survival in Patients with Stable Coronary Heart Disease". Nutrients 14, n.º 16 (20 de agosto de 2022): 3433. http://dx.doi.org/10.3390/nu14163433.

Texto completo
Resumen
Knowledge about cardiac and inflammatory biomarkers in patients with stable coronary artery disease (CAD) is limited. To address this, we analyzed 3072 patients (36% female) with a median follow-up of 10 years in the Leipzig LIFE Heart Study with suspected CAD with coronary angiography. Selected biomarkers included troponin T (hsTNT), N-terminal pro B-type natriuretic peptide (NT-proBNP), copeptin, C-reactive protein (hsCRP), and interleukin-6 (IL-6). Patients were stratified by CAD severity: CAD0 (no sclerosis), CAD1 (non-obstructive, i.e., stenosis < 50%), and CAD2 (≥one stenosis ≥ 50%). Group comparison (GC) included GC1: CAD0 + 1 vs. CAD2; GC2: CAD0 vs. CAD1 + 2. CAD0, CAD1, and CAD2 were apparent in 1271, 631, and 1170 patients, respectively. Adjusted for classical risk factors, hs-cTnT, NT-proBNP, and IL-6 differed significantly in both GC and hsCRP only in GC2. After multivariate analysis, hs-cTnT, NT-proBNP, and IL-6 remained significant in GC1. In GC2, hs-cTnT (p < 0.001) and copeptin (p = 0.014) reached significance. Ten-year survival in groups CAD0, CAD1, and CAD2 was 88.3%, 77.3%, and 72.4%. Incorporation of hs-cTnT, NT-proBNP, copeptin, and IL-6 improved risk prediction (p < 0.001). The studied cardiac and inflammatory biomarkers enable fast and precise non-invasive identification of mortality risk in CAD patients, allowing the tailoring of primary and secondary CAD prevention.
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

GAO, Sande y Atsushi KATO. "3209 Research on CAD/CAE/CAM for a Die Cast". Proceedings of Design & Systems Conference 2007.17 (2007): 311–14. http://dx.doi.org/10.1299/jsmedsd.2007.17.311.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Sbrana, Silverio, Jonica Campolo, Alberto Clemente, Luca Bastiani, Antonella Cecchettini, Elisa Ceccherini, Chiara Caselli et al. "Blood Monocyte Phenotype Fingerprint of Stable Coronary Artery Disease: A Cross-Sectional Substudy of SMARTool Clinical Trial". BioMed Research International 2020 (27 de julio de 2020): 1–11. http://dx.doi.org/10.1155/2020/8748934.

Texto completo
Resumen
Background and Aims. Atherosclerosis is an inflammatory disease with long-lasting activation of innate immunity and monocytes are the main blood cellular effectors. We aimed to investigate monocyte phenotype (subset fraction and marker expression) at different stages of coronary atherosclerosis in stable coronary artery disease (CAD) patients. Methods. 73 patients with chronic coronary syndrome were evaluated by CT coronary angiography (CTCA) and classified by maximal diameter stenosis of major vessels into three groups of CAD severity: CAD1 (no CAD/minimal CAD, n°=30), CAD2 (non-obstructive CAD, n°=21), and CAD3 (obstructive CAD, n°=22). Flow cytometry for CD14, CD16, and CCR2 was used to quantify Mon1, Mon2, and Mon3 subsets. Expression of CD14, CD16, CD18, CD11b, HLA-DR, CD163, CCR2, CCR5, CX3CR1, and CXCR4 was also measured. Adhesion molecules and cytokines were quantified by ELISA. Results. Total cell count and fraction of Mon2 were higher in CAD2 and CAD3 compared to CAD1. By multivariate regression analysis, Mon2 cell fraction and Mon2 expression of CX3CR1, CD18, and CD16 showed a statistically significant and independent increase, parallel to stenosis severity, from CAD1 to CAD2 and CAD3 groups. A similar trend was also present for CX3CR1 and HLA-DR expressions on total monocyte population. A less calcified plaque composition was associated to a higher Mon2 expression of CD16 and higher TNF-α levels. IL-10 levels were lower at greater stenosis severity, while the IFN-γ/IL-10 ratio, a marker of a systemic pro-inflammatory imbalance, was directly correlated to stenosis degree and number of noncalcified plaques. Conclusions. The results of this study suggest that a specific pattern of inflammation-correlated monocyte marker expression is associated to higher stenosis severity and less calcified lesions in stable CAD. The clinical trial Identifier is NCT04448691.
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

HAGIWARA, Ichiro. "341 Present Status and Future Prospect of CAD/CAE". Proceedings of The Computational Mechanics Conference 2006.19 (2006): 433–34. http://dx.doi.org/10.1299/jsmecmd.2006.19.433.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Tagowski, Michał y Andrzej Zaborski. "Manufacturing preparation of details using CAD and CAD/CAM software". Mechanik, n.º 7 (julio de 2015): 568/849–568/856. http://dx.doi.org/10.17814/mechanik.2015.7.305.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Babu, Numbury Surendra y Didugu Jayaprakash. "Computational Study of the Stability of Tautomers and equilibrium constants of Cyanuric acid (CA) in Different solvents." JOURNAL OF ADVANCES IN CHEMISTRY 11, n.º 2 (22 de enero de 2015): 3485–97. http://dx.doi.org/10.24297/jac.v11i2.6691.

Texto completo
Resumen
In the present investigation, the tautomeric and equilibrium of Cyanuric acid has been studied using Hartifock (HF) method in the gas phase and different solvents using the PCM model. The relative energies of these tautomers have been calculated at the HF level of theory using 6-311++ G (d,p) basis set. Energetics and relative stabilities of the tautomers were compared and analyzed in both the gaseous and different solvents. The results indicate that the keto tautomer (CA1) is the most stable form in the gas phase and other solvents. The order of stability of isomers was found to be CA1 > CA3> CA11> CA2> CA6> CA10> CA7> CA4> CA5> CA9>CA8. Having the largest dipole moment the CA8 tautomer is expected to have the strongest interaction with polar solvents. The HF method calculated tautomeric equilibrium constants with respect to the most stable tautomer CA1 of Cyanuric acid both in the gas and in different solvents. The of the equilibrium constants calculated starting from the general outline of interconversion.
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

MANAGAKI, Masao. "CAD/CAM Database Systems". Journal of the Society of Mechanical Engineers 91, n.º 833 (1988): 331–37. http://dx.doi.org/10.1299/jsmemag.91.833_331.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Tesis sobre el tema "CAD"

1

Paul, Steffen. "Spritzgußsimulation als Kopplungselement von CAD und CAE". Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-142037.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Böhme, Carsten y Klaus Brökel. "Konzept zum Parameteraustausch zwischen unterschiedlichen CAD/CAE-Plattformen". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-228848.

Texto completo
Resumen
Einleitung und Motivation Im ZIM-Projekt Vestainnen wird die Entwicklung einer stationären Wirbelschichtfeuerungsanlage (SWSF) kleiner Leistung fortgesetzt. Dabei liegen die Schwerpunkte auf der Modellierung und Simulation der Belastungen an Anlage und den Abläufen in der Feuerung. Insgesamt sind am Projekt sieben Partner beteiligt, die parallel und weitgehend unabhängig arbeiten und die Entwicklung ihres Teilprojekts vorantreiben. Bedingt durch die Vielfalt der Aufgaben kommt bei jedem Partner eine eigene, für die Teilaufgabe geeignete Softwarelösung zum Einsatz. Um die Entwicklungsergebnisse jedoch gemeinsam nutzen zu können, müssen diese eigenständigen Teilmodelle jederzeit auf einen gemeinsamen Stand gebracht werden können, um dieselbe Baugröße und Konfiguration der SWSF abzubilden.
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Böhme, Carsten y Klaus Brökel. "Konzept zum Parameteraustausch zwischen unterschiedlichen CAD/CAE-Plattformen". TUDpress - Verlag der Wissenschaften GmbH, 2012. https://tud.qucosa.de/id/qucosa%3A30535.

Texto completo
Resumen
Einleitung und Motivation Im ZIM-Projekt Vestainnen wird die Entwicklung einer stationären Wirbelschichtfeuerungsanlage (SWSF) kleiner Leistung fortgesetzt. Dabei liegen die Schwerpunkte auf der Modellierung und Simulation der Belastungen an Anlage und den Abläufen in der Feuerung. Insgesamt sind am Projekt sieben Partner beteiligt, die parallel und weitgehend unabhängig arbeiten und die Entwicklung ihres Teilprojekts vorantreiben. Bedingt durch die Vielfalt der Aufgaben kommt bei jedem Partner eine eigene, für die Teilaufgabe geeignete Softwarelösung zum Einsatz. Um die Entwicklungsergebnisse jedoch gemeinsam nutzen zu können, müssen diese eigenständigen Teilmodelle jederzeit auf einen gemeinsamen Stand gebracht werden können, um dieselbe Baugröße und Konfiguration der SWSF abzubilden.
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Kitasaka, Takayuki, Kensaku Mori y Yasuhito Suenaga. "NAVIGATION-BASED INTELLIGENT CAD SYSTEM： NAVI-CAD". INTELLIGENT MEDIA INTEGRATION NAGOYA UNIVERSITY / COE, 2006. http://hdl.handle.net/2237/10416.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Xu, Jianfei. "CAD-based integrated simulation environment, CAD-ISE". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/NQ60359.pdf.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Ramos, Carla Müller. "Propriedades mecânicas e caracterização intrínseca de zircônia experimental para uso em sistemas CAD/CAM". Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/25/25148/tde-03092013-155032/.

Texto completo
Resumen
O objetivo deste estudo foi avaliar as propriedades mecânicas e as características intrínsecas de uma zircônia tetragonal policristalina parcialmente estabilizada por ítria (Y-TZP) experimental comparada a outras três Y-TZPs comercialmente disponíveis, a partir de blocos para sistema CAD/CAM. Os grupos foram: Y-TZP Experimental (ZE), Zirconcad (ZCA), IPS e.max ZirCad (ZMAX) e In Ceram YZ (ZYZ). Resistência flexural: 120 espécimes foram construídos para cada grupo (n=30) e submetidos ao ensaio de flexão em três pontos com velocidade de 0,5mm/min, de acordo com a ISO 6872. ANOVA a um critério foi utilizada para análise de diferenças significantes entre os grupos (α=0,05). Para a caracterização da resistência e longevidade dos materiais estudados, utilizou-se a análise estatística de Weibull por meio de dois parâmetros: o módulo de Weibull (m) e a resistência característica (δ0). Análise Fractográfica: a superfície da fratura dos espécimes foi analisada pelo microscópio eletrônico de varredura (MEV) sendo que o tamanho do defeito crítico (c) e a tenacidade à fratura (KIC) foi estimado por análise fractográfica quantitativa e sua caracterização por meio de análise fractográfica qualitativa. Espectroscopia Micro Raman: as fases da estrutura cristalina das diferentes Y-TZP foram identificadas por meio da detecção das bandas características. Houve diferença significativa (p <0,05) na resistência à flexão entre ZCA, que apresentou os menores valores, em comparação com ZE, ZMAX e ZYZ, que, por sua vez, foram semelhantes entre si. As superfícies fraturadas de todos os espécimes apresentaram marcas fractográficas características, sendo observada na superfície de ZCA uma maior quantidade de defeitos. Os valores de tenacidade à fratura de ZE foram significantemente diferente apenas para ZCA. Todos os materiais apresentaram as bandas características das fases tetragonal e monoclínica da Y-TZP. ZE mostrou-se semelhante em suas propriedades mecânicas e microestrutura às ZMAX e ZYZ, apresentando-se como um material promissor para uso em sistema CAD/CAM. ZCA apresentou os menores valores de resistência flexural e tenacidade à fratura o que sugere que a quantidade e distribuição de defeitos tem efeito sobre seu comportamento mecânico.
The aim of this study was to evaluate the mechanical properties and the intrinsic characteristics of an experimental yttrium tetragonal zirconia partially stabilized (Y-TZP) compared the other three Y-TZPs commercially available starting block for CAD/CAM system. The groups were: Experimental Zirconia (ZE), Zirconcad (ZCA), IPS e.max ZirCad (ZMAX) and In Ceram YZ (ZYZ). Flexural strength: 120 specimens were constructed for each group (n=30) and subjected to bending test at three points crosshead speed of 0.5mm/min, according to ISO 6872. ANOVA test was used to analyze significant differences between groups (α=0.05). To characterize the strength and longevity of the materials, the Weibull statistical analysis by two parameters were used: the Weibull modulus (m) and the characteristic strength (δ0). Fractographic analyzes: the fracture surface of the specimens was analyzed by scanning electron microscope (SEM) and the size of the critical defect (c) and fracture toughness (KIC) was estimated by quantitative fractographic analysis and characterization through qualitative analysis. Micro Raman spectroscopy: phases of crystalline structures of different Y-TZP were identified by detecting the characteristic bands. Statistically significant (p <0.05) in flexural strength between ZCA, which had the lowest values compared with ZE, ZMAX and ZYZ, which in turn were similar. The fractured surfaces of all specimens showed similar fractographics characteristics and values of fracture toughness for ZE were significant difference only for ZCA. All materials showed the characteristic bands of tetragonal and monoclinic phases of zirconia. ZE were similar in its mechanical properties and intrinsic, which suggests that material capable of being used for the system CAD/CAM and applied clinically as framework.
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Sguizzardi, Silvio. "Modelando o futuro: a evolução do uso de tecnologias digitais no desenvolvimento de projetos de arquitetura". Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/16/16132/tde-26012012-153604/.

Texto completo
Resumen
A pesquisa aborda processos criativos e produtivos da arquitetura contemporânea, a partir da história do desenvolvimento tecnológico da computação gráfica e sua influência sobre a atividade profissional do arquiteto. Baseada na análise projetual, de forma a explicitar a problemática colocada, toma como estudos de caso três projetos desenvolvidos em diferentes momentos dessa evolução: a Casa da Ópera de Sidney, na Austrália; o pavilhão H2Oexpo na ilha de Neeltje Jans, Holanda; e, o Museu Mercedes-Benz em Stuttgart, Alemanha. Através de uma análise crítica, procuramos entender as relações do uso de computadores no desenvolvimento e construção destes projetos. Para cada caso, foram analisadas as técnicas empregadas, os benefícios conquistados e inovações proporcionadas, bem como, as dificuldades, limitações e os desafios enfrentados, desde o início do desenvolvimento do projeto, ao término da execução da edificação. A leitura integral e objetiva do objeto baseia-se em acervo documental, material bibliográfico e no discurso e posicionamento de profissionais envolvidos, visando à compreensão da riqueza e diversidade do tema. O trabalho pretende dar uma contribuição ao entendimento desta relação, colaborando também para o estudos de questões projetuais ligadas as novas mídias, como forma de estabelecer uma base de conhecimento para a reflexão a respeito do uso de ferramentas da computação gráfica no universo arquitetônico.
With the history of the graphic computation technological development and its influence on the architect\'s professional activity as the starting point, the present research addresses the creative and productive processes of contemporary architecture. Based on the project analysis as a way of explaining the problem being presented, three projects developed at different times along this evolution are presented as case studies: the Sydney Opera House, Australia; the H2Oexpo Pavilion in the island of Neeltje Jans, Netherlands; the Mercedes-Benz Museum in Stuttgart, Germany. By using a critical analysis we try to understand the relations in the use of computers in the development and building of these projects. The analysis of each case included the techniques that were used, the benefits obtained and innovations provided, as well as the difficulties, limitations and challenges that were faced from the very beginning of the project development until the building was constructed. In order to better understand the wealth and diversity of the theme, the collection of documents, bibliography and statements and positioning of the professionals involved were used to obtain a full and objective reading of the object. The present work was designed to bring a contribution to understand this relation, cooperating with the study of project issues related to the new media, as a way to establish a knowledge foundation to reflect on the use of graphic computation tools in the architectural universe.
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Chaudhari, Sachin B. "DEVELOPMENT OF AN INTERNET-BASED ANALYSIS TOOL USING THE BOUNDARY ELEMENT METHOD". University of Cincinnati / OhioLINK, 2000. http://rave.ohiolink.edu/etdc/view?acc_num=ucin971963697.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Bao, Zhuojun. "Rechnerunterstützte Kollisionsprüfung auf der Basis eines B-rep/Polytree/CSG-Hybridmodells in einem integrierten CAD/CAM-System /". Düsseldorf : VDI-Verl, 2000. http://www.gbv.de/dms/bs/toc/319988562.pdf.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Dhamija, Dinesh. "Macintosh - Bridgeport communications CAD/CAM". Ohio : Ohio University, 1988. http://www.ohiolink.edu/etd/view.cgi?ohiou1182784285.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Libros sobre el tema "CAD"

1

Miller, Richard Kendall. Survey on CAD/CAM, CAE. Madison, GA: Future Technology Surveys, 1988.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Carl, Machover y Machover Carl, eds. The CAD/CAM handbook. New York: McGraw-Hill, 1996.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Koller, Rudolf. CAD. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-85837-6.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Roller, Dieter. CAD. Berlin, Heidelberg: Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/978-3-642-79449-0.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Medland, A. J. CAD/CAM in practice: A manager's guide to understanding and using CAD/CAM. New York: Wiley, 1986.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

W, Crawford George y Coticchia Mark E, eds. CAD/CAM dictionary. New York: Dekker, 1985.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

R, Soenen, Olling G y International Federation for Information Processing., eds. Advanced CAD/CAM systems: State-of-the-art and future trends in feature technology. London: Published by Chapman & Hall on behalf of the International Federation for Information Processing (IFIP), 1995.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

1938-, Noor Ahmed Khairy, Malone John B y Langley Research Center, eds. Next generation CAD/CAM/CAE systems. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1997.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

1938-, Noor Ahmed Khairy, Malone John B y Langley Research Center, eds. Next generation CAD/CAM/CAE systems. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1997.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Lee, Kunwoo. Principles of CAD/ CAM/ CAE systems. Reading, MA: Addison-Wesley, 2003.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Capítulos de libros sobre el tema "CAD"

1

Anderl, Reiner y Pablo Castro. "Einleitung". En CAD/CAM, 1–3. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_1.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Anderl, Reiner y Pablo Castro. "CAD/CAM-Systeme im Produktentstehungsprozeß". En CAD/CAM, 4–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_2.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Anderl, Reiner y Pablo Castro. "Merkmale der CAD/CAM-Technologie". En CAD/CAM, 21–35. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_3.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Anderl, Reiner y Pablo Castro. "Datenintegration". En CAD/CAM, 36–81. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_4.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Anderl, Reiner y Pablo Castro. "CAD/CAM-Anwendungen". En CAD/CAM, 82–181. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_5.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Anderl, Reiner y Pablo Castro. "Unterstützung von CAD/CAM-Anwendungen durch wissensbasierte Systeme". En CAD/CAM, 182–215. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_6.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Anderl, Reiner y Pablo Castro. "CAD/CAM-Prozeßketten". En CAD/CAM, 216–73. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_7.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Anderl, Reiner y Pablo Castro. "Nachwort". En CAD/CAM, 274–75. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-93473-5_8.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Toriya, Hiroshi y Hiroaki Chiyokura. "Outline of CAD/CAM/CAE". En 3D CAD, 1–7. Berlin, Heidelberg: Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-45729-6_1.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Riley, Frank. "Electronics CAE/CAD/CAM". En The Electronics Assembly Handbook, 491–500. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-662-13161-9_77.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.

Actas de conferencias sobre el tema "CAD"

1

Andrae, René y Peter Köhler. "Challenges Associated with Teaching CAD/CAE". En CAD'14. CAD Solutions LLC, 2014. http://dx.doi.org/10.14733/cadconfp.2014.134-136.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Wang, Pei-Yu, Shinn-Liang Chang, Chang-Wei Cao y Duy-Hoang Nguyen. "CAD/CAE of spherical gears". En the International Conference. New York, New York, USA: ACM Press, 2016. http://dx.doi.org/10.1145/2952744.2958871.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Andrae, Rene. "Challenges Associated with Teaching CAD/CAE". En CAD'14 Hong Kong. CAD Solutions LLC, 2014. http://dx.doi.org/10.14733/cadconfp.2014.138-140.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Schifko, Martin, Bernhard Kornberger, Daniela Fellhofer y Hans Steiner. "Automatic CAD Data Preparation for CAE". En SAE 2015 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2015. http://dx.doi.org/10.4271/2015-01-1333.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Staubach, Brent. "CAD-CAE-CAM Knowledge/Computer Based". En AIAA International Air and Space Symposium and Exposition: The Next 100 Years. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2003. http://dx.doi.org/10.2514/6.2003-2803.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Li, Lei y Yongsheng Ma. "CAD/CAE Associative Features for Cyclic Fluid Control Effect Modeling". En CAD'15. CAD Solutions LLC, 2015. http://dx.doi.org/10.14733/cadconfp.2015.171-176.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Gajewski, R. "Simulations and Animations for CAD/CAE Software". En 2006 10th International Conference on Computer Supported Cooperative Work in Design. IEEE, 2006. http://dx.doi.org/10.1109/cscwd.2006.253153.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

BOLUKBASI, A., D. FUREY y A. GOODWORTH. "Application of expert systems to CAD/CAE". En Aircraft Design and Operations Meeting. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1989. http://dx.doi.org/10.2514/6.1989-2085.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Suresh, Krishnan. "Automating the CAD/CAE dimensional reduction process". En the eighth ACM symposium. New York, New York, USA: ACM Press, 2003. http://dx.doi.org/10.1145/781606.781621.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Chao, Tien-Hsin y Thomas Lu. "Grayscale optical correlator for CAD/CAC applications". En SPIE Defense and Security Symposium, editado por David P. Casasent y Tien-Hsin Chao. SPIE, 2008. http://dx.doi.org/10.1117/12.785873.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.

Informes sobre el tema "CAD"

1

Keuthan, Lynn M. CAD/CAM Feasibility Study. Fort Belvoir, VA: Defense Technical Information Center, septiembre de 1990. http://dx.doi.org/10.21236/ada226403.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Keuthan, Lynn M. CAD/CAM Feasibility Study. Fort Belvoir, VA: Defense Technical Information Center, septiembre de 1990. http://dx.doi.org/10.21236/ada226554.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Ames, A. L. Immersive CAD. Office of Scientific and Technical Information (OSTI), febrero de 1999. http://dx.doi.org/10.2172/3674.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Langeveld, Willy G. J. The CAD-EGS Project: Using CAD Geometrics in EGS4. Office of Scientific and Technical Information (OSTI), marzo de 2002. http://dx.doi.org/10.2172/799112.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Domm, T. C. y R. S. Underwood. Model-Based Engineering and Manufacturing CAD/CAM Benchmark. Office of Scientific and Technical Information (OSTI), octubre de 1999. http://dx.doi.org/10.2172/14442.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Domm, T. D. y R. S. Underwood. Model-Based Engineering and Manufacturing CAD/CAM Benchmark. Office of Scientific and Technical Information (OSTI), abril de 1999. http://dx.doi.org/10.2172/6890.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

AMES, ARLO L. Cloud to CAD. Office of Scientific and Technical Information (OSTI), mayo de 2001. http://dx.doi.org/10.2172/782599.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Regli, William C., Simon Szykman, Stephen J. J. Smith y Peter F. Brown. Network-Centric CAD:. Gaithersburg, MD: National Institute of Standards and Technology, 1997. http://dx.doi.org/10.6028/nist.ir.6043.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Muto, Kazuo. Trend of 3D CAD/CAE/CAM/CAT/Network Systems and PLM System in Advance Technology for Manufacturing Engineering Development. Warrendale, PA: SAE International, mayo de 2005. http://dx.doi.org/10.4271/2005-08-0137.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Liung, Per. Portable Coupled Field CAD. Fort Belvoir, VA: Defense Technical Information Center, agosto de 2000. http://dx.doi.org/10.21236/ada382657.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
También puede estar interesado en las bibliografías ampliadas sobre el tema "CAD" para tipos de fuentes particulares:
Artículos de revistas Tesis Libros
Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!

Pasar a la bibliografía