Libros sobre el tema "Buckling"

Lindberg, Herbert E. y Alexander L. Florence. Dynamic Pulse Buckling. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3657-7.

Byskov, Esben. Selected buckling problems. Lyngby, Denmark: Department of Structural Engineering, Technical University of Denmark, 1990.

G, Falzon B. y Aliabadi M. H, eds. Buckling and post buckling structures: Experimental, analytical and numerical studies. London: Imperial College Press, 2008.

Johann, Arbocz y Weller T, eds. Buckling experiments: Experimental methods in buckling of thin-walled structures. Chichester: Wiley, 1998.

Shama, Mohamed. Buckling of Ship Structures. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-17961-7.

Shama, Mohamed. Buckling of Ship Structures. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.

Kachanov, L. M. Delamination Buckling of Composite Materials. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2819-0.

Bushnell, D. Computerized buckling analysis of shells. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5063-4.

Akbarov, Surkay. Stability Loss and Buckling Delamination. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30290-9.

C, Chamis C. y United States. National Aeronautics and Space Administration., eds. Probabalistic progressive buckling of trusses. [Washington, DC]: National Aeronautics and Space Administration, 1991.

Thompson, Randolph C. Thermal-structural panel buckling tests. Edwards, Calif: National Aeronautics and Space Administration, Ames Research Center, Dryden Flight Research Facility, 1991.

Essa, Hesham S. Distortional buckling of steel beams. Edmonton, Alta., Canada: Dept. of Civil Engineering, University of Alberta, 1993.

Riks, E. The B2000 linear buckling processor. Amsterdam: National Aerospace Laboratory, 1988.

Hakmi, Mohammed Raheef. Local buckling of sandwich panels. Salford: University of Salford, 1988.

Thompson, Randolph C. Thermal-structural panel buckling tests. Edwards, Calif: National Aeronautics and Space Administration, Ames Research Center, Dryden Flight Research Facility, 1991.

S, Kitipornchai, ed. Buckling of thick skew plates. Brisbane: University of Queensland, Dept. of Civil Engineering, 1992.

Pai, Shantaram S. Probablistic progressive buckling of trusses. [Washington, DC]: National Aeronautics and Space Administration, 1991.

Teng, J. G. Buckling of thin metal shells. London: Spon Press, 2004.

Dux, P. F. Buckling of suspended I-beams. St. Lucia: University of Queensland, Dept. of Civil Engineering, 1988.

Fan, Chun Keung Roger. Buckling in continuous composite beams. [s.l.]: typescript, 1990.

Michael, Rotter J., ed. Buckling of thin metal structures. London: Spon Press, 2003.

Zhong, H. G. A hybrid procedure for the solution of mode jumping problems. London: Imperial College of Science, Technology & Medicine, Dept. of Aeronautics, 1996.

Ho, William L. Compressive buckling analysis of hat-stiffened panel. Edwards, Calif: Dryden Flight Research Facility, 1991.

J, Turvey G. y Marshall I. H, eds. Buckling and postbuckling of composite plates. London: Chapman & Hall, 1995.

Sun, Guojun. Optimization of laminated cyclinders for buckling. [Downsview, Ont.]: [Institute for Aerospace Studies], 1986.

Turvey, G. J. y I. H. Marshall, eds. Buckling and Postbuckling of Composite Plates. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-1228-4.

Dickel, Timm, Heinz-Peter Klemens y Heinrich Rothert. Ideale Biegedrillknickmomente / Lateral-Torsional Buckling Coefficients. Wiesbaden: Vieweg+Teubner Verlag, 1991. http://dx.doi.org/10.1007/978-3-663-14083-2.

Lee, A. S. Buckling analysis of spent fuel basket. Washington, D.C: Division of Industrial and Medical Nuclear Safety, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 1995.

M, Jones Robert. Buckling of bars, plates, and shells. Blacksburg, Va: Bull Ridge Publishing, 2006.

M, Jones Robert. Buckling of bars, plates, and shells. Blacksburg, VA: Bull Ridge Publishing, 2007.

Sung, Guojun. Optimization of laminated cylinders for buckling. [Downsview, Ont.]: Institute for Aerospace Studies, 1987.

Lindberg, Herbert E. Dynamic Pulse Buckling: Theory and Experiment. Dordrecht: Springer Netherlands, 1987.

Turvey, G. J. Buckling and Postbuckling of Composite Plates. Dordrecht: Springer Netherlands, 1995.

G, Greimann L., U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering. y Ames Laboratory, eds. Buckling evaluation of System 80+ containment. Washington, DC: Division of Engineering, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1994.

1928-, Florence Alexander L., ed. Dynamic pulse buckling: Theory and experiment. Dordrecht: M. Nijhoff, 1987.

Simitses, George J. An introduction to the elastic stability of structures. Malabar, Fla: R.E. Krieger Pub. Co., 1986.

Center, Langley Research, ed. The analysis of non-linear dynamic behavior (including snap-through) of postbuckled plates by simple analytical solution. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1988.

Daniel, Sydow P., Librescu Liviu y United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Postbuckling response of long thick isotropic plates loaded in compression including higher order transverse shearing effects. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Center, Langley Research, ed. Nondimensional parameters and equations for buckling of symmetrically laminated thin elastic shallow shells. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.

Whitcomb, John D. Three-dimensional analysis of a postbuckled embedded delamination. Hampton, Va: Langley Research Center, 1988.

Center, Langley Research, ed. The analysis of non-linear dynamic behavior (including snap-through) of postbuckled plates by simple analytical solution. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1988.

Buckling and Post-Buckling. Berlin/Heidelberg: Springer-Verlag, 1987. http://dx.doi.org/10.1007/bfb0009196.

Buckling of Structures. Elsevier, 1988. http://dx.doi.org/10.1016/c2009-0-09697-4.

Shama, Mohamed. Buckling of Ship Structures. Springer, 2014.

Falzon, B. G. y M. H. Aliabadi. Buckling and Postbuckling Structures. PUBLISHED BY IMPERIAL COLLEGE PRESS AND DISTRIBUTED BY WORLD SCIENTIFIC PUBLISHING CO., 2008. http://dx.doi.org/10.1142/p506.

Shama, Mohamed. Buckling of Ship Structures. Springer, 2012.

Bian, Bingchuan y Huazhong University Huazhong University of Science and Technology. Topological Optimization of Buckling. de Gruyter GmbH, Walter, 2018.

Buckling Of Ship Structures. Springer, 2012.

Bian, Bingchuan y Huazhong University Huazhong University of Science and Technology. Topological Optimization of Buckling. de Gruyter GmbH, Walter, 2018.

Bian Huazhong University of Science and. Topological Optimization of Buckling. De Gruyter, 2018.