Artículos de revistas: "Advanced materials and technologies"

1

You, Zhanping, Qingli Dai y Feipeng Xiao. "Advanced Paving Materials and Technologies". Applied Sciences 8, n.º 4 (9 de abril de 2018): 588. http://dx.doi.org/10.3390/app8040588.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Natesan, K. "Materials performance in advanced fossil technologies". JOM 43, n.º 11 (noviembre de 1991): 61–67. http://dx.doi.org/10.1007/bf03222723.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Novák, Pavel. "Advanced Powder Metallurgy Technologies". Materials 13, n.º 7 (8 de abril de 2020): 1742. http://dx.doi.org/10.3390/ma13071742.

Texto completo

Resumen

Powder metallurgy is a group of advanced processes for the synthesis, processing, and shaping of various kinds of materials. Initially inspired by ceramics processing, the methodology comprising of the production of a powder and its transformation to a compact solid product has attracted great attention since the end of World War II. At present, there are many technologies for powder production (e.g., gas atomization of the melt, chemical reduction, milling, and mechanical alloying) and its consolidation (e.g., pressing and sintering, hot isostatic pressing, and spark plasma sintering). The most promising ones can achieve an ultra-fine or nano-grained structure of the powder, and preserve it during consolidation. Among these methods, mechanical alloying and spark plasma sintering play a key role. This Special Issue gives special focus to the advancement of mechanical alloying, spark plasma sintering and self-propagating high-temperature synthesis methods, as well as to the role of these processes in the development of new materials.

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Hernandez‐Sosa, Gerardo. "InnovationLab Special Section in Advanced Materials Technologies". Advanced Materials Technologies 6, n.º 2 (febrero de 2021): 2001069. http://dx.doi.org/10.1002/admt.202001069.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Titov, A. "Advanced materials and technologies for modern constructions". Nanoindustry Russia, n.º 5 (2015): 48–54. http://dx.doi.org/10.22184/1993-8578.2015.59.5.48.54.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Powell, Cynthia A. y Bryan D. Morreale. "Materials Challenges in Advanced Coal Conversion Technologies". MRS Bulletin 33, n.º 4 (abril de 2008): 309–15. http://dx.doi.org/10.1557/mrs2008.64.

Texto completo

Resumen

AbstractCoal is a critical component in the international energy portfolio, used extensively for electricity generation. Coal is also readily converted to liquid fuels and/or hydrogen for the transportation industry. However, energy extracted from coal comes at a large environmental price: coal combustion can produce large quantities of ash and CO2, as well as other pollutants. Advanced technologies can increase the efficiencies and decrease the emissions associated with burning coal and provide an opportunity for CO2 capture and sequestration. However, these advanced technologies increase the severity of plant operating conditions and thus require improved materials that can stand up to the harsh operating environments. The materials challenges offered by advanced coal conversion technologies must be solved in order to make burning coal an economically and environmentally sound choice for producing energy.

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Włosiński, Władysław. "Environmentally friendly welding technologies for advanced materials". Welding International 25, n.º 12 (diciembre de 2011): 923–26. http://dx.doi.org/10.1080/09507116.2010.540845.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

(Sam) Froes, F. H. "Advanced Materials and Processing Technologies (AMPT-2003)". Materials Technology 19, n.º 1 (enero de 2004): 40–44. http://dx.doi.org/10.1080/10667857.2004.11753166.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

YAMANAKA, TATSUO. "Advanced Materials are innovating in Space Technologies". Sen'i Gakkaishi 42, n.º 5 (1986): P158—P161. http://dx.doi.org/10.2115/fiber.42.5_p158.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

OHMORI, Hitoshi. "Advanced Materials Fabrication for Nano/Micro Technologies". Journal of the Society of Mechanical Engineers 108, n.º 1040 (2005): 533. http://dx.doi.org/10.1299/jsmemag.108.1040_533.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

11

Müller, Erich A. "Interface Science for Advanced Materials & Technologies". Adsorption Science & Technology 32, n.º 1 (enero de 2014): i—ii. http://dx.doi.org/10.1260/0263-6174.32.1.i.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

12

Palmero, Paola y Stéphane Hocquet. "Advanced materials and technologies for bone engineering". Materials Science and Engineering: C 95 (febrero de 2019): 342. http://dx.doi.org/10.1016/j.msec.2018.09.025.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

13

Boyes, E. D. "LVEDS For Advanced Materials and Semiconductor Technologies". Microscopy and Microanalysis 5, S2 (agosto de 1999): 314–15. http://dx.doi.org/10.1017/s1431927600014896.

Texto completo

Resumen

The need to analyze bulk samples containing features with submicron dimensions has driven revaluation of the processes controlling the interaction of electron beams with inorganic, polymer and semiconductor materials, and to development of LVEDS analysis at lower beam energies of E0 <5kV (1,2).It has previously been shown (1,2) that the physics is much as expected with the vertical penetration range (R) along the beam direction in many cases predicted quite accurately for beam energy E0 by the simple Bethe (e.g. in 3) power law with R = F(E0)5/3. These same factors are effective to varying degrees in all three dimensions. The strong dependence of the range on energy has practical importance for the identification of sub-micron particles, including to help to determine the root cause of a defect Fig. 1 is an example of the sequential analysis of the exact same sub-micron particle, with the very real potential for a processing disaster, on the surface of a silicon wafer. When this feature is analyzed with a 3kV electron beam we learn it is alumina (A12O3). The analysis comes only from the target particle and the data have a simple relationship to the chemistry and the sensitivity for the light element (O) is excellent, providing simple and direct qualitative identification of the oxide compound.

Los estilos APA, Harvard, Vancouver, ISO, etc.

14

Crivello, James V. y Elsa Reichmanis. "Photopolymer Materials and Processes for Advanced Technologies". Chemistry of Materials 26, n.º 1 (8 de noviembre de 2013): 533–48. http://dx.doi.org/10.1021/cm402262g.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

15

KAWAMOTO, Yoshifumi y Keiichi KIMURA. "Consortium for Advanced Semiconductor Materials and Technologies". Journal of the Japan Society for Precision Engineering 74, n.º 5 (2008): 421–24. http://dx.doi.org/10.2493/jjspe.74.421.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

16

Maex, Karen. "Materials aspects of silicides for advanced technologies". Applied Surface Science 53 (noviembre de 1991): 328–37. http://dx.doi.org/10.1016/0169-4332(91)90282-o.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

17

Levy, Esther, Jovia Jiang, Jolke Perelaer, Marco A. Squillaci y Valentina Lombardo. "The Full Impact of Advanced Materials Technologies". Advanced Materials Technologies 4, n.º 8 (agosto de 2019): 1900567. http://dx.doi.org/10.1002/admt.201900567.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

18

Levy, Esther, Jovia Jiang y Jolke Perelaer. "Advanced Materials Technologies Celebrates Its First Anniversary". Advanced Materials Technologies 2, n.º 4 (abril de 2017): 1700055. http://dx.doi.org/10.1002/admt.201700055.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

19

You, Zhanping y Qingli Dai. "Advanced Pavement Technologies". Journal of Materials in Civil Engineering 30, n.º 9 (septiembre de 2018): 02018001. http://dx.doi.org/10.1061/(asce)mt.1943-5533.0002475.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

20

Valiulis, Algirdas Vaclovas y Jelena Škamat. "Advanced Materials Research and Technologies Development: Lithuanian Experience". Solid State Phenomena 165 (junio de 2010): 210–15. http://dx.doi.org/10.4028/www.scientific.net/ssp.165.210.

Texto completo

Resumen

Lithuania, as a small country, cannot afford creating new knowledge in all the fields of science. It is reasonable to firstly focus on those fields in which Lithuania already has scientific and industrial potential and that clearly declare the biggest demand for innovations as well as capability to invest into innovations. Research institutions here usually focus on fundamental research but both the revenues and the human resources of research institutions are rather poor. Dispersion of the Lithuanian potential of science and studies and the absence of critical mass represent the main reasons why R&D lacks effectiveness. The paper presents the main research fields and high-tech research institutions in Lithuania.

Los estilos APA, Harvard, Vancouver, ISO, etc.

21

You, Zhanping, Jian-long Zheng y Hainian Wang. "Achievements and Prospects of Advanced Pavement Materials Technologies". Applied Sciences 10, n.º 21 (2 de noviembre de 2020): 7743. http://dx.doi.org/10.3390/app10217743.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

22

Dini, Danilo y Michael Hanack. "Phthalocyanines as materials for advanced technologies: some examples". Journal of Porphyrins and Phthalocyanines 08, n.º 07 (julio de 2004): 915–33. http://dx.doi.org/10.1142/s1088424604000301.

Texto completo

Resumen

Metallophthalocyanine complexes and related compounds play an important role in many advanced applications and modern technologies mostly by virtue of their characteristic optical absorption and high chemical stability. As a class of materials made well-known by their vivid and fast colors, it is expected that metallophthalocyanines and analogues, e.g. naphthalocyanines, are going to keep their role with the increasing use of natural and artificial light in the technologies of the future. In the present review some relevant properties of phthalocyanines and related macrocycles for technological applications are analyzed. In particular the electrical conductivity and photoconductivity as well as some nonlinear optical properties (mostly optical limiting), of phthalocyanines and related compounds are discussed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

23

Sorace, Stefano, Bert Blocken, Claudio Borri, Luca Caracoglia, Francisco Javier Molina y Gerhardt Müller. "Advanced Materials and Technologies for Structural Performance Improvement". Advances in Materials Science and Engineering 2016 (2016): 1–3. http://dx.doi.org/10.1155/2016/1854839.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

24

Obeng, Yaw S., Kurt G. Steiner, Ankineedu N. Velaga y Chien-Shing Pal. "Dielectric Materials for Advanced VLSI and ULSI Technologies". AT&T Technical Journal 73, n.º 3 (6 de mayo de 1994): 94–111. http://dx.doi.org/10.1002/j.1538-7305.1994.tb00591.x.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

25

Pacchioni, Gianfranco. "Two-Dimensional Oxides: Multifunctional Materials for Advanced Technologies". Chemistry - A European Journal 18, n.º 33 (30 de julio de 2012): 10144–58. http://dx.doi.org/10.1002/chem.201201117.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

26

Sterle, Luka, Damir Grguraš, Matjaž Kern y Franci Pušavec. "Sustainability Assessment of Advanced Machining Technologies". Strojniški vestnik – Journal of Mechanical Engineering 65, n.º 11-12 (18 de noviembre de 2019): 671–79. http://dx.doi.org/10.5545/sv-jme.2019.6351.

Texto completo

Resumen

Efficient cooling and lubrication techniques are required to obtain sustainable machining of difficult-to-cut materials, which are the pillars of aerospace, automotive, medical and nuclear industries. Cryogenic machining with the assistance of lubricated Liquid Carbon Dioxide (LCO2) is a novel approach for sustainable manufacturing without the use of harmful water-based metalworking fluids (MWFs). In case of unavoidable use of MWFs under high pressure, such as turning finishing processes of difficult-to-cut materials, the pulsating high pressure delivery of MWFs prolongs the tool life and enables the control over chip length to prevent surface damage of high value-added parts. In this paper, sustainability assessment of both advanced principles was carried out, considering overall costs and operational safety. Experimental tests were executed on difficult-to-cut materials in comparison to conventional flood lubrication. For both techniques, longer tool life compared to flood lubrication was observed additional cleaner production and higher part quality led to reduced long-term overall costs. These advanced machining technologies are also operation safe, proving to be a sustainable alternative to conventional machining.

Los estilos APA, Harvard, Vancouver, ISO, etc.

27

G Moodley, Kandasamy. "Advances In Corrosion Inhibition Materials And Technologies: A Review". Advanced Materials Letters 10, n.º 4 (1 de febrero de 2019): 231–47. http://dx.doi.org/10.5185/amlett.2019.2199.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

28

Natesan, K. "Materials Performance in Advanced Combustion Systems". Journal of Engineering for Gas Turbines and Power 116, n.º 2 (1 de abril de 1994): 331–37. http://dx.doi.org/10.1115/1.2906824.

Texto completo

Resumen

A number of advanced technologies are being developed to convert coal into clean fuels for use as feedstock in chemical plants and for power generation. From the standpoint of component materials, the environments created by coal conversion and combustion in these technologies and their interactions with materials are of interest. The trend in the new or advanced systems is to improve thermal efficiency and reduce the environmental impact of the process effluents. This paper discusses several systems that are under development and identifies requirements for materials application in those systems. Available data on the performance of materials in several of the environments are used to examine the performance envelopes for materials for several of the systems and to identify needs for additional work in different areas.

Los estilos APA, Harvard, Vancouver, ISO, etc.

29

Patel, Prachi y Oliver Gutfleisch. "Advanced magnetic materials could drive next-generation energy technologies". MRS Bulletin 43, n.º 12 (diciembre de 2018): 918–19. http://dx.doi.org/10.1557/mrs.2018.300.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

30

Choi, Myong Yong, Jayaraman Theerthagiri y Gilberto Maia. "2D advanced materials and technologies for industrial wastewater treatment". Chemosphere 284 (diciembre de 2021): 131394. http://dx.doi.org/10.1016/j.chemosphere.2021.131394.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

31

Sevost’yanov, M. A. y A. S. Lysenkov. "Sixth Interdisciplinary Scientific Forum “New Materials and Advanced Technologies”". Russian Journal of Inorganic Chemistry 66, n.º 8 (agosto de 2021): 1055–56. http://dx.doi.org/10.1134/s0036023621080258.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

32

Santato, Clara, Mihai Irimia Vladu, Maria Holuszko y Lan Yin. "Special Issue of Advanced Materials Technologies on Green Electronics". Advanced Materials Technologies 7, n.º 2 (febrero de 2022): 2101220. http://dx.doi.org/10.1002/admt.202101220.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

33

Tanioka, T. "Future Trends in Aerospace Technologies and Advanced Composite Materials." Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) 47, n.º 5 (1994): P185—P191. http://dx.doi.org/10.4188/transjtmsj.47.5_p185.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

34

Calame, J. P. y D. K. Abe. "Applications of advanced materials technologies to vacuum electronic devices". Proceedings of the IEEE 87, n.º 5 (mayo de 1999): 840–64. http://dx.doi.org/10.1109/5.757257.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

35

Wang, Xiaoyan, Jinhua Li y Lingxin Chen. "Advanced preparation technologies and strategies for molecularly imprinted materials". Chinese Science Bulletin 64, n.º 13 (26 de febrero de 2019): 1352–67. http://dx.doi.org/10.1360/n972018-00964.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

36

Levy, Esther, Jovia Jiang, Jolke Perelaer y Babak Mostaghaci. "Celebrating the First Impact Factor of Advanced Materials Technologies". Advanced Materials Technologies 3, n.º 8 (agosto de 2018): 1800285. http://dx.doi.org/10.1002/admt.201800285.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

37

Asphahani, A. I. "Advanced materials technologies of interest to the process industries". Materials and Corrosion/Werkstoffe und Korrosion 36, n.º 11 (noviembre de 1985): 501–10. http://dx.doi.org/10.1002/maco.19850361105.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

38

Zhu, Bin y Peter Lund. "Advanced fuel cells: from materials and technologies to applications". International Journal of Energy Research 35, n.º 12 (9 de agosto de 2011): 1023–24. http://dx.doi.org/10.1002/er.1905.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

39

O'Brien, J., P. J. Hughes, M. Brunet, B. O'Neill, J. Alderman, B. Lane, A. O'Riordan y C. O'Driscoll. "Advanced photoresist technologies for microsystems". Journal of Micromechanics and Microengineering 11, n.º 4 (1 de julio de 2001): 353–58. http://dx.doi.org/10.1088/0960-1317/11/4/312.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

40

Hashem, Manafi Sheydan. "Manufacture and processing of advanced composite materials". Izvestiya MGTU MAMI 8, n.º 1-2 (10 de marzo de 2014): 191–94. http://dx.doi.org/10.17816/2074-0530-67864.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

41

Kulekci, Mustafa Kemal, Ugur Esme, Funda Kahraman y Seref Ocalir. "Advanced hybrid welding and manufacturing technologies". Materials Testing 58, n.º 4 (4 de abril de 2016): 362–70. http://dx.doi.org/10.3139/120.110858.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

42

Zhu, Rui, Zhongwei Zhang y Yulong Li. "Advanced materials for flexible solar cell applications". Nanotechnology Reviews 8, n.º 1 (18 de diciembre de 2019): 452–58. http://dx.doi.org/10.1515/ntrev-2019-0040.

Texto completo

Resumen

Abstract The solar power is one of the most promising renewable energy resources, but the high cost and complicated preparation technology of solar cells become the bottleneck of the wide application in many fields. The most important parameter for solar cells is the conversion efficiency, while at the same time more efficient preparation technologies and flexible structures should also be taken under significant consideration [1]. Especially with the rapid development of wearable devices, people are looking forward to the applications of solar cell technology in various areas of life. In this article the flexible solar cells, which have gained increasing attention in the field of flexibility in recent years, are introduced. The latest progress in flexible solar cells materials and manufacturing technologies is overviewed. The advantages and disadvantages of different manufacturing processes are systematically discussed.

Los estilos APA, Harvard, Vancouver, ISO, etc.

43

Wharry, Janelle P. y Enrico Salvati. "Advanced welding and joining technologies – A commentary". Materials Today Communications 35 (junio de 2023): 105563. http://dx.doi.org/10.1016/j.mtcomm.2023.105563.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

44

Suzuki, Hirofumi y Kazuhito Ohashi. "Special Issue on Advanced Abrasive Process Technologies". International Journal of Automation Technology 13, n.º 6 (5 de noviembre de 2019): 721. http://dx.doi.org/10.20965/ijat.2019.p0721.

Texto completo

Resumen

The demand for high-precision and high-efficiency machining of hard ceramics such as silicon carbide (SiC) for semiconductors and hardened steel for molding dies has significantly increased for power devices in automobiles, optical devices, and medical devices. Certain types of hard metals can be machined by deterministic precision-cutting processes. However, hard and brittle ceramics, hardened steel for molds, or semiconductor materials have to be machined by precision abrasive technologies such as grinding, polishing, and ultrasonic vibration technologies with diamond super abrasives. The machining of high-precision components and their molds/dies by abrasive processes is much more difficult owing to their complex and nondeterministic nature as well as their complex textured surface. Furthermore, high-energy processes with UV lasers and IR lasers, and ultrasonic vibration can be used to assist abrasive technologies for greater precision and efficiency. In this sense, precision grinding and polishing processes are primarily used to generate high-quality and functional components usually made of hard and brittle materials. The surface quality achieved by precision grinding and polishing processes becomes more important to reduce processing time and costs. This special issue features seven research papers on the most recent advances in precision abrasive technologies for hard materials. These papers cover various abrasive machining processes such as grinding, polishing, ultrasonic-assisted grinding, and laser-assisted technologies. We deeply appreciate the careful work of all the authors and thank the reviewers for their incisive efforts. We also hope that this special issue will encourage further research on abrasive technologies.

Los estilos APA, Harvard, Vancouver, ISO, etc.

45

Ding, Wenjin y Xiaolei Fan. "Special issue on progress in advanced energy technologies and materials". Chinese Journal of Chemical Engineering 34 (junio de 2021): 228–29. http://dx.doi.org/10.1016/j.cjche.2021.01.004.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

46

Ma, Jian-Min y Yu-Tao Li. "Editorial for advanced energy storage and conversion materials and technologies". Rare Metals 40, n.º 2 (12 de enero de 2021): 246–48. http://dx.doi.org/10.1007/s12598-020-01654-4.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

47

Hari M, Arjun y Lintu Rajan. "Advanced Materials and Technologies for Touch Sensing in Prosthetic Limbs". IEEE Transactions on NanoBioscience 20, n.º 3 (julio de 2021): 256–70. http://dx.doi.org/10.1109/tnb.2021.3072954.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

48

Chowdari, B. V. R. y Shweta Agarwala. "Singapore hosts 10th International Conference on Materials for Advanced Technologies". MRS Bulletin 44, n.º 10 (octubre de 2019): 817. http://dx.doi.org/10.1557/mrs.2019.246.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

49

Wen, Zhen, Hengyu Guo y Longfei Wang. "Editorial for Special Issue: Advanced Materials and Technologies in Nanogenerators". Nanomaterials 12, n.º 20 (14 de octubre de 2022): 3606. http://dx.doi.org/10.3390/nano12203606.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

50

Arrigoni, Michel. "Metallic Materials and Their Applications in Aerospace and Advanced Technologies". Metals 12, n.º 2 (26 de enero de 2022): 226. http://dx.doi.org/10.3390/met12020226.

Texto completo

Resumen

Exploring the mysteries of the universe, transporting people over longer distances in the safest way, providing energy to a growing global population, and facing environmental changes are among the major challenges that will face humanity in the coming decades: Satellite observations have become essential in monitoring the ecological health of the Earth, but they require space launches that raise the paradox of greenhouse and toxic gases rejection by the use of solid propellants [...]

Los estilos APA, Harvard, Vancouver, ISO, etc.

Artículos de revistas sobre el tema "Advanced materials and technologies"

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros