Libros sobre el tema "3D data analysi"

The last ten years have seen explosive growth in the technology available to the collision analyst, changing the way reconstruction is practiced in fundamental ways. The greatest technological advances for the crash reconstruction community have come in the realms of photogrammetry and digital media analysis. The widespread use of scanning technology has facilitated the implementation of powerful new tools to digitize forensic data, create 3D models and visualize and analyze crash vehicles and environments. The introduction of unmanned aerial systems and standardization of crash data recorders to the crash reconstruction community have enhanced the ability of a crash analyst to visualize and model the components of a crash reconstruction. Because of the technological changes occurring in the industry, many SAE papers have been written to address the validation and use of new tools for collision reconstruction. Collision Reconstruction Methodologies Volumes 1-12 bring together seminal SAE technical papers surrounding advancements in the crash reconstruction field. Topics featured in the series include: • Night Vision Study and Photogrammetry • Vehicle Event Data Recorders • Motorcycle, Heavy Vehicle, Bicycle and Pedestrian Accident Reconstruction The goal is to provide the latest technologies and methodologies being introduced into collision reconstruction - appealing to crash analysts, consultants and safety engineers alike.

Finding patterns in biomolecular data, particularly in DNA and RNA, is at the center of modern biological research. These data are complex and growing rapidly, so the search for patterns requires increasingly sophisticated computer methods. Pattern Discovery in Biomolecular Data provides a clear, up-to-date summary of the principal techniques. Each chapter is self-contained, and the techniques are drawn from many fields, including graph theory, information theory, statistics, genetic algorithms, computer visualization, and vision. Since pattern searches often benefit from multiple approaches, the book presents methods in their purest form so that readers can best choose the method or combination that fits their needs. The chapters focus on finding patterns in DNA, RNA, and protein sequences, finding patterns in 2D and 3D structures, and choosing system components. This volume will be invaluable for all workers in genomics and genetic analysis, and others whose research requires biocomputing.

The integration of virtual reality into archaeological research began in the early 1990s. The use of computer-based methods in maritime archaeology is recent. Before exploring a real-time virtual, a 3D computer model is created from drawings, general sketches, raw dimensions, 3D scanned data, or photographs, or by using simple primitives and “drawing” on the computer. Virtual reality is a simulation of physical reality offering the viewer real-time movement through a true 3D space and interactivity with the objects, which can be further enhanced with 3D sound, lighting, and touch. This article presents case studies to show how virtual reality becomes valuable for the four components of archaeology: documentation, research/analysis/hypothesis testing, teaching, and publication. As digital technologies advance, so too will the opportunities to explore underwater sites in ways that will continue to enhance our abilities to understand and teach maritime history.

Today, the scientific and technological sphere has become the main arena of competition between countries in the world, and the use of new technologies, especially in the field of armaments, is considered as one of the most important levers of geopolitics. Such technologies are a key for expanding the capabilities of the state's defense capabilities and achieving national security goals, priory to military and military-economic, as well as scientific and technological security. Today, the identification of scientific and technological key areas of military development is used to determine the priorities of scientific and technological development and military-technical policy which is crucial for the process of creating promising models of armaments and military equipment. The introduction of the latest technologies in the military is difficult to imagine without the use of computer and other telecommunications equipment, artificial intelligence technology, military robotics, quantum and space technology, 3D printing and biotechnology. Although they all are already used in the military and security spheres, still monitoring innovation and new technologies in the military are important for understanding not only future wars, but also global security. This study reviews global technological trends based on the analysis of publications of foreign consulting agencies, international organizations and forecasting and analytical research conducted by the author's methodology. The data upon perspective directions of development of scientific and technological researches in the military sphere on the basis of the analysis of publishing activity of a DB of Web of Science and a DB of patents of Derwent Innovations is provided. In particular, the range of new directions of technological development of the military sphere has been expanded and clarified not only in general, but also specified by types and kinds of troops. This analysis allowed us to determine that the areas of development claimed by international organizations and consulting agencies correlate with the areas identified by the authors of the study on the basis of scientometric and patent analysis. At the same time, the forecasted promising areas of research, determined by scientometric analysis of Web of Science publications, more or less completely coincide with the forecasts of NATO, RAND Corporation.

The quality of data collected in official spatial databases is crucial in making strategic decisions as well as in the implementation of planning and design works. Awareness of the level of the quality of these data is also important for individual users of official spatial data. The author presents methods and models of description and evaluation of the quality of spatial data collected in public registers. Data describing the space in the highest degree of detail, which are collected in three databases: land and buildings registry (EGiB), geodetic registry of the land infrastructure network (GESUT) and in database of topographic objects (BDOT500) were analyzed. The results of the research concerned selected aspects of activities in terms of the spatial data quality. These activities include: the assessment of the accuracy of data collected in official spatial databases; determination of the uncertainty of the area of registry parcels, analysis of the risk of damage to the underground infrastructure network due to the quality of spatial data, construction of the quality model of data collected in official databases and visualization of the phenomenon of uncertainty in spatial data. The evaluation of the accuracy of data collected in official, large-scale spatial databases was based on a representative sample of data. The test sample was a set of deviations of coordinates with three variables dX, dY and Dl – deviations from the X and Y coordinates and the length of the point offset vector of the test sample in relation to its position recognized as a faultless. The compatibility of empirical data accuracy distributions with models (theoretical distributions of random variables) was investigated and also the accuracy of the spatial data has been assessed by means of the methods resistant to the outliers. In the process of determination of the accuracy of spatial data collected in public registers, the author’s solution was used – resistant method of the relative frequency. Weight functions, which modify (to varying degree) the sizes of the vectors Dl – the lengths of the points offset vector of the test sample in relation to their position recognized as a faultless were proposed. From the scope of the uncertainty of estimation of the area of registry parcels the impact of the errors of the geodetic network points was determined (points of reference and of the higher class networks) and the effect of the correlation between the coordinates of the same point on the accuracy of the determined plot area. The scope of the correction was determined (in EGiB database) of the plots area, calculated on the basis of re-measurements, performed using equivalent techniques (in terms of accuracy). The analysis of the risk of damage to the underground infrastructure network due to the low quality of spatial data is another research topic presented in the paper. Three main factors have been identified that influence the value of this risk: incompleteness of spatial data sets and insufficient accuracy of determination of the horizontal and vertical position of underground infrastructure. A method for estimation of the project risk has been developed (quantitative and qualitative) and the author’s risk estimation technique, based on the idea of fuzzy logic was proposed. Maps (2D and 3D) of the risk of damage to the underground infrastructure network were developed in the form of large-scale thematic maps, presenting the design risk in qualitative and quantitative form. The data quality model is a set of rules used to describe the quality of these data sets. The model that has been proposed defines a standardized approach for assessing and reporting the quality of EGiB, GESUT and BDOT500 spatial data bases. Quantitative and qualitative rules (automatic, office and field) of data sets control were defined. The minimum sample size and the number of eligible nonconformities in random samples were determined. The data quality elements were described using the following descriptors: range, measure, result, and type and unit of value. Data quality studies were performed according to the users needs. The values of impact weights were determined by the hierarchical analytical process method (AHP). The harmonization of conceptual models of EGiB, GESUT and BDOT500 databases with BDOT10k database was analysed too. It was found that the downloading and supplying of the information in BDOT10k creation and update processes from the analyzed registers are limited. An effective approach to providing spatial data sets users with information concerning data uncertainty are cartographic visualization techniques. Based on the author’s own experience and research works on the quality of official spatial database data examination, the set of methods for visualization of the uncertainty of data bases EGiB, GESUT and BDOT500 was defined. This set includes visualization techniques designed to present three types of uncertainty: location, attribute values and time. Uncertainty of the position was defined (for surface, line, and point objects) using several (three to five) visual variables. Uncertainty of attribute values and time uncertainty, describing (for example) completeness or timeliness of sets, are presented by means of three graphical variables. The research problems presented in the paper are of cognitive and application importance. They indicate on the possibility of effective evaluation of the quality of spatial data collected in public registers and may be an important element of the expert system.

A technical project alongside the University courses can deepen the understanding and increase the motivation for the subject of choice. As a student, there is often a hurdle to start such a project because of a lack of inspiration. And even after overcoming this, the costs associated with such a project may put students off. With my project I show how a 3rd semester Mechanical Engineering student can design and manufacture a rocket engine with all testing components on a student budget. Cost structure and resource planning are explained in detail. I launched the project in December 2020 and in September 2021 it was presented at the StuFoExpo21. A general curiosity for the topic and a basic understanding of mechanical engineering was sufficient for starting the project. Importantly, I gained the most valuable knowledge during the implementation of the project, through active failure-iteration and reading specialised literature. The project is focussed on the design and manufacturing of a rocket engine and its testing components. A special feature is the cooling jacket of the combustion chamber. It has been 3D printed in the SLUB Makerspace, a facility at TU Dresden. Further work packages of the project were the programming of sensors and control systems, first open-air combustion tests of the injector head, safety checks and a Risk & Safety analysis. The first testing and other preliminary work were performed in collaboration with fellow students. During the entire design and manufacturing process I was in continuous exchange with the research group “Space Transportation” of the Institute of Aerospace Engineering at TU Dresden. Special thanks go to Dipl.-Ing. Jan Sieder-Katzmann and Dipl.-Ing. Maximilian Buchholz for their help during this process. For 2022 I plan a test campaign of the rocket engine to collect sensor data and to perform engine thrust measurements.

Heat waves will occur in Rotterdam with greater frequency in the future. Those affected most will be the elderly – a group that is growing in size. In the light of the Paris heat wave of August 2003 and the one in Rotterdam in July 2006, mortality rates among the elderly in particular are likely to rise in the summer. METHOD The aim of the Hotterdam research project was to gain a better understanding of urban heat. The heat was measured and the surface energy balance modelled from that perspective. Social and physical features of the city we identified in detail with the help of satellite images, GIS and 3D models. We determined the links between urban heat/surface energy balance and the social/physical features of Rotterdam by multivariable regression analysis. The crucial elements of the heat problem were then clustered and illustrated on a social and a physical heat map. RESULTS The research project produced two heat maps, an atlas of underlying data and a set of adaptation measures which, when combined, will make the city of Rotterdam and its inhabitants more aware and less vulnerable to heat wave-related health effects. CONCLUSION In different ways, the pre-war districts of the city (North, South, and West) are warmer and more vulnerable to urban heat than are other areas of Rotterdam. The temperature readings that we carried out confirm these findings as far as outdoor temperatures are concerned. Indoor temperatures vary widely. Homes seem to have their particular dynamics, in which the house’s age plays a role. The above-average mortality of those aged 75 and over during the July 2006 heat wave in Rotterdam can be explained by a) the concentration of people in this age group, b) the age of the homes they live in, and c) the sum of sensible heat and ground heat flux. A diverse mix of impervious surfaces, surface water, foliage, building envelopes and shade make one area or district warmer than another. Adaptation measures are in the hands of residents, homeowners and the local council alike, and relate to changing behaviour, physical measures for homes, and urban design respectively.