Libros sobre el tema "18MND5 low alloy steel"

International Iron and Steel Institute. Committee on Technology., ed. High strength low alloy steels. Brussels, Belgium: International Iron and Steel Institute, 1987.

Society, Iron and Steel, ed. Steel products manual.: Carbon, high strength low alloy, and alloy. Warrendale, PA: Iron and Steel Society, 1995.

Society, Iron and Steel, ed. Steel products manual.: Rolled floor plates, carbon, high strength low alloy, and alloy steel. [Warrendale, Pa.]: Iron and Steel Society, 1991.

Society, Iron and Steel, ed. Steel products manual.: Rolled floor plates, carbon, high strength low alloy, and alloy steel. [Warrendale, Pa.]: Iron and Steel Society, 1997.

Society, Iron and Steel, ed. Steel products manual.: Carbon and high strength low alloy steel. [Warrendale, Pa.]: Iron & Steel Society, 1998.

Society, Iron and Steel, ed. Steel products manual.: Carbon and high strength low alloy steel. [Warrendale, PA]: Iron and Steel Society, 1991.

Dicken, Rachel. Trace element embrittlement in a low alloy steel. Manchester: University of Manchester, 1994.

1923-, Tamura Imao, ed. Thermomechanical processing of high-strength low-alloy steels. London: Butterworths, 1988.

Farrar, J. C. M. The alloy tree: A guide to low-alloy steels, stainless steels and nickel-base alloys. Cambridge: Woodhead, 2004.

Society, Iron and Steel, ed. Sheet steel: Carbon, high strength low alloy, alloy, uncoated, metallic coated, coil coated, coils, cut lengths, corrugated products. Warrendale, Pa: Iron and Steel Society, 1999.

Tylczak, J. H. Correlating abrasive wear to alloy additions in low-alloy steels. Pittsburgh, Pa: U.S. Dept. of the Interior, Bureau of Mines, 1986.

Li, Chen Xi. Fretting fatigue behaviour of surface engineered low alloy steel. Birmingham: University of Birmingham, 1998.

Society, American Welding y American welding Society Technical Activities Committee., eds. Specification for resistance welding of carbon and low-alloy steels. Miami, FL: American Welding Society, 2000.

Society, Iron and Steel. Pocketbook of tolerances and metallurgical information: Strip steels : carbon, high strength low alloy, alloy. Warrendale, PA: Iron & Steel Society, 2001.

Cooper, David. The boundary lubricated friction and wear of low alloy steel. Birmingham: Aston University. Department of Electrical and Electronic Engineering and Applied Physics, 1989.

Yong, Sun. Plasma nitriding and PVD ceramic coating of low alloy steel. Birmingham: University of Birmingham, 1989.

M, Cobb Harold y Iron and Steel Society, eds. Steel products manual.: Carbon, high strength low alloy, and alloy coils and cut lengths (including coated products). Warrendale, PA: Iron and Steel Society, 1988.

Keisler, J. Fatigue strain-life behavior of carbon and low-alloy steels, austenitic stainless steels, and alloy 600 in LWR environments. Washington, DC: U.S. Nuclear Regulatory Commission, 1995.

Brooks, Charlie R. Principles of the heat treatment of plain carbon and low alloy steels. Materials Park, OH: ASM International, 1996.

Dawud, Sattar Jabar. Oxidational wear of low alloy steel in gases other than air. Birmingham: Aston University. Department of Electronic Engineering and Applied Physics., 1992.

AWS Committee on Filler Metals., ed. Specification for low-alloy steel electrodes for flux cored arc welding. Miami, Fla: American Welding Society, 1998.

Society, Iron and Steel, ed. Pocketbook of tolerances for dimensions for sheet steel (including coated products): Carbon, high strength low alloy, alloy. Warrendale, PA: Iron & Steel Society, 1997.

Society, Iron and Steel, ed. Pocketbook of tolerances for dimensions for sheet steel (including coated products): Carbon high-strength low-alloy, alloy. Warrendale, PA: Iron & Steel Society, 1999.

Bose, Waldek Wladimir Filho. Micromechanisms of brittle fracture in high strength low alloy steel weld metals. Birmingham: University of Birmingham, 1995.

McLean, Steven. Chemical vapour deposition of titanium carbide on low alloy high speed steel. Birmingham: University of Birmingham, 1987.

Wrigley, Nigel Stuart. The fracture characteristics of a boron containing high strength low alloy steel. Salford: University ofSalford, 1994.

American Welding Society. Committee on Filler Metal., ed. Specification for low-alloy steel electrodes and rods for gas shielded arc welding. Miami, Fla: American Welding Society, 1990.

(Australia), Materials Research Laboratories, ed. The influence of forge reduction ratio on the tensile and impact properties of a low-alloy ESR steel. Ascot Vale, Vic: Dept. of Defence, Materials Research Laboratories, 1986.

Birchall, K. L. The stress corrosion cracking of a low alloy steel in lithiated boric acid solutions. Manchester: UMIST, 1989.

K, Chopra O., Shack W. J, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering. y Argonne National Laboratory, eds. Interim fatigue design curves for carbon, low-alloy, and austenitic stainless steels in LWR environments. Washington, DC: Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1993.

Saenger, Fritz. Guide to weldablity: Carbon and low alloy steels : how to get the needed results and stay out of trouble. Miami, Fla: American Welding Society, 2005.

Vaidya, W. V. Compliance variations in the fatigue threshold regime of a low alloy ferritic steel under closure-free testing conditions. Geesthacht: GKSS-Forschungszentrum Geesthacht GmbH, 1991.

Priestner, Deborah Mary. An investigation of the chemical vapour deposition of titanium carbide onto pre-carburised low carbon, low alloy steel substrates. Birmingham: University of Birmingham, 1989.

K, Chopra O., Shack W. J, U.S. Nuclear Regulatory Commission. Division of Safety Issue Resolution. y Argonne National Laboratory, eds. Statistical analysis of fatigue strain-life data for carbon and low-alloy steels. Washington, DC: Division of Safety Issues Resolution, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1994.

K, Chopra O., Shack W. J, U.S. Nuclear Regulatory Commission. Division of Safety Issue Resolution. y Argonne National Laboratory, eds. Statistical analysis of fatigue strain-life data for carbon and low-alloy steels. Washington, DC: Division of Safety Issues Resolution, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1994.

Pollock, W. J. Statistical treatment of slow strain rate data for assessment of hydrogen embrittlement in low alloy high strength steel. Melbourne, Victoria: Aeronautical Research Laboratory, 1990.

Berkhout, C. F. Metallurgy and mechanical properties of multipass submerged arc weld metal in C/MN and low alloy constructional steel. Luxembourg: Commission of the European Communities, 1987.

Vaidya, W. V. An experimental assessment of hysteresis in near-threshold fatigue crack propagation regime of a low alloy ferritic steel under closure-free testing conditions. Geesthacht: GKSS-Forschungszentrum Geesthacht GmbH, 1991.

Institute of Materials, Minerals, and Mining. A working party report on guidelines on materials requirements for carbon and low alloy steels for H₂S-containing environments in oil and gas production. 3^a ed. Leeds, UK: Published for the European Federation of Corrosion by Maney Publishing on behalf of the Institute of Materials, Minerals & Mining, 2009.

Institute of Materials, Minerals, and Mining., ed. A working party report on guidelines on materials requirements for carbon and low alloy steels for H₂S-containing environments in oil and gas production. 3^a ed. Leeds, UK: Published for the European Federation of Corrosion by Maney Publishing on behalf of the Institute of Materials, Minerals & Mining, 2009.

Tack, Andrew J. The effect of microstructure and loading variables on fatigue crack propagation in three aerospace bearing steels anda low alloy steel. Birmingham: University of Birmingham, 1989.

Ricardo, Branco. High-strength steels: New trends in production and applications. New York: Nova Science Publishers, Incorporated, 2018.

Plates, Rolled Floor Plates: Carbon, High Strength Low Alloy, and Alloy Steel. Iron & Steel Society, 1991.

Steel products manual.: Carbon, high strength low alloy, and alloy. Warrendale, PA: Iron and Steel Society, 1988.

Society, Iron and Steel. Steel Products Manual: Carbon and High Strength Low Alloy Steel. Iron & Steel Society, 1991.

Farrar, C. Alloy Tree: A Guide to Low-Alloy Steels, Stainless Steels and Nickel-Base Alloys. Elsevier Science & Technology, 2004.

Farrer, J. C. M. The Alloy Tree: A Guide to Low-Alloy Steels, Stainless Steels, and Nickel-base Alloys. CRC, 2004.

NCCER. 29305-16 GTAW Low Alloy and Stainless Steel Pipe. Pearson Education, Limited, 2016.

Steel products manual.: Carbon, high strength low alloy, alloy uncoated, metallic coated, coil coated, coils, cut lengths, corrugated products. Warrendale, PA: Iron and Steel Society, 1996.

Magdowski, Ruth Maria. Stress corrosion cracking of low alloy steel in water. 1987.