Academic literature on the topic 'Температурний контроль'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Contents
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Температурний контроль.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Температурний контроль"
Boriak, K. F., and N. A. Peretyaka. "TEMPERATURE CONTROL AT TESTS OF REDUCERS OF A REDUCER-PITCH DRIVE OF CURRENT GENERATORS LOCATED UNDER THE BODY OF A PASSENGER CAR." Key title Zbìrnik naukovih pracʹ Odesʹkoï deržavnoï akademìï tehnìčnogo regulûvannâ ta âkostì -, no. 1(6) (2015): 53–58. http://dx.doi.org/10.32684/2412-5288-2015-1-6-53-58.
Full textСемин, Михаил Александрович, Артем Вячеславович Зайцев, Олег Сергеевич Паршаков, and Максим Сергеевич Желнин. "ОБОСНОВАНИЕ ТЕХНОЛОГИЧЕСКИХ ПАРАМЕТРОВ ТЕРМОМЕТРИЧЕСКОГО КОНТРОЛЯ СОСТОЯНИЯ ЛЕДОПОРОДНОГО ОГРАЖДЕНИЯ." Izvestiya Tomskogo Politekhnicheskogo Universiteta Inziniring Georesursov 331, no. 9 (September 22, 2020): 215–28. http://dx.doi.org/10.18799/24131830/2020/9/2824.
Full textШвец, В. А., Д. В. Марин, М. В. Якушев, and С. В. Рыхлицкий. "Исследование температурной зависимости спектров оптических постоянных пленок Hg-=SUB=-1-x-=/SUB=-Cd-=SUB=-x-=/SUB=-Te, выращенных методом молекулярно-лучевой эпитаксии." Оптика и спектроскопия 129, no. 1 (2021): 33. http://dx.doi.org/10.21883/os.2021.01.50436.213-20.
Full textOzarkiv, I. M., M. S. Kobrynovuch, Z. H. Humeniuk, and I. V. Petryshak. "Контроль напружено-деформованого стану і вологості деревини в тепломасообмінних процесах сушіння." Scientific Bulletin of UNFU 28, no. 10 (November 29, 2018): 81–84. http://dx.doi.org/10.15421/40281017.
Full textUtepov, Y., A. Tulebekova, A. Kazkeyev, and M. Oshan. "NORMATIVE REGULATION OF METHODS OF TEMPERATURE AND STRENGTH CONTROL OF CONCRETE." Herald of Kazakh-British technical university 18, no. 2 (June 1, 2021): 99–105. http://dx.doi.org/10.55452/1998-6688-2021-18-2-99-105.
Full textMasalskiy, V. P., and S. I. Kuznetsov. "Вплив паркових насаджень на температурний режим урбанізованого середовища." Scientific Bulletin of UNFU 28, no. 7 (September 27, 2018): 49–52. http://dx.doi.org/10.15421/40280710.
Full textSyas’ko, V. A., S. S. Golubev, and A. E. Ivkin. "Experience of Developing Instruments for Measuring Firearm Functional Coating Thickness." Bulletin of Kalashnikov ISTU 22, no. 3 (October 9, 2019): 11. http://dx.doi.org/10.22213/2413-1172-2019-3-11-18.
Full textШликов, Владислав Валентинович, and Андрій Григорович Дубко. "БЕЗКОНТАКТНИЙ МЕТОД КОНТРОЛЮ ТЕМПЕРАТУРИ ПРИ ВИСОКОЧАСТОТНОМУ ЗВАРЮВАННІ ТКАНИН." Біомедична інженерія і технологія, no. 2 (November 30, 2019): 117–23. http://dx.doi.org/10.20535/2617-8974.2019.2.185450.
Full textА. С. Никифоров, А. К. Кинжибекова, Е. В. Приходько, and А. Е. Карманов. "АНАЛИЗ УСЛОВИЙ ЭКСПЛУАТАЦИИ, ВЛИЯЮЩИХ НА ОСТАТОЧНЫЙ РЕСУРС ОБМУРОВКИ КОТЕЛЬНЫХ АГРЕГАТОВ." Bulletin of Toraighyrov University. Energetics series, no. 4.2021 (November 28, 2021): 57–66. http://dx.doi.org/10.48081/dqzb7257.
Full textVivat, Anatolii, Yurii Korduba, and Sergii Petrov. "ДОСЛІДЖЕННЯ ВПЛИВУ ТЕМПЕРАТУРИ НА ЗМІНУ РОЗМІРУ КОНТРОЛЬНИХ ЛІНІЙОК ІЗ ВИКОРИСТАННЯМ ІНДИКАТОРА ГОДИННИКОВОГО ТИПУ." TECHNICAL SCIENCES AND TECHNOLOGIES, no. 3(21) (2020): 310–18. http://dx.doi.org/10.25140/2411-5363-2020-3(21)-310-318.
Full textDissertations / Theses on the topic "Температурний контроль"
Бойко, Іван Сергійович. "Автоматизована система тепловентиляції з температурним контролем." Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/34433.
Full textThesis project on the topic: "Automated thermal ventilation system with temperature control", consists of 5 sections, the volume of the explanatory note - 63 pages of printed text, includes 20 figures, 7 tables, four sheets of A1, one sheet of A3, 2 sheets of A4. The purpose of the diploma project is to develop an air conditioning system for the paint room and automate its operation. During the work on the project, standard calculations for the ventilation system were performed, equipment was selected and an automatic control scheme was developed. The first section presents the basic requirements for ventilation and air conditioning in the room of the technological process of painting cars and methods of their implementation. The second and third sections calculated the aerodynamic and electrical characteristics of the necessary elements of the automation system. The section "Occupational Safety" presented the basic requirements for electrical safety, fire safety, and requirements for microclimate and lighting in the room where the project took place.
Близнюк, Д. С. "Налаштування температурних режимів екструдеру 3D принтера." Thesis, ХНУРЕ, 2019. http://openarchive.nure.ua/handle/document/10051.
Full textГусаков, К. В., and Сергій Олександрович Губський. "Тензометричний неруйнівний контроль металоконструкції кранів." Thesis, Національний технічний університет "Харківський політехнічний інститут", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/44086.
Full textДячун, Денис Васильович, and Denys Dyachun. "Зарядний пристрій акумуляторів з контролем температури." Bachelor's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2021. http://elartu.tntu.edu.ua/handle/lib/35605.
Full textThe work is devoted to the development of a battery charger, that is, the development of a block diagram, an electrical circuit diagram. When selecting the components, the synthesis of electrical circuit components is performed. Technical characteristics: Input voltage more than 12-15V, charge current 0.1-4.0A (step 0.1A), number of charging and discharging cycles not less than 300 cycles. Battery type must be LI-Ion / Polymer-1-5 (3.6 / 3.7V).
Перелік умовних позначень, символів, одиниць, скорочень і термінів 7 Вступ 8 1 Основна частина 9 1.1 Аналіз технічного завдання 9 1.1.2 Основні робочі характеристики акумуляторів 10 1.1.3 Способи заряду Ni-MH та Ni-Cd акумуляторів 11 1.1.4 Аналіз існуючих пристроїв для зарядження акумуляторів 16 1.1.5 Постановка задачі 23 1.2 Розроблення структурної схеми 23 1.3 Проектування і розрахунок вузлів електричної принципової схеми пристрою 25 1.3.1 Розробка електричної схеми зарядного пристрою 25 1.3.2 Вузловий розрахунок 34 1.4 Компонентна база для зарядного пристрою 41 1.5 Компоновка друкованого вузла пристрою 46 1.5.1 Розрахунок механічної міцності та стійкості пристрою 46 1.5.2 Розрахунок вібростійкості 46 1.5.3 Розрахунок електромагнітної сумісності 49 1.6 Висновок до розділу 1 50 2 Безпека життєдіяльності, основи охорони праці 51 2.1 Актуальність безпеки життєдіяльності людини 51 2.2 Пожежна профілактика на дільниці (в цеху) 54 2.3 Висновок до розділу 2 57 Висновки 58 Список використаних джерел 59Додатки Додаток А. Технічне завдання Додаток Б. Перелік елементів Додаток В. Специфікація
Павленко, Я. М. "Лабораторний цифровий стенд контролю вібрації, температури та вологості." Thesis, Чернігів, 2021. http://ir.stu.cn.ua/123456789/25021.
Full textВ рамках випускної роботи було розроблено лабораторний цифровий стенд контролю вібрації, вологості та температури, яка складається з двох частин - блоку датчику та збору інформації, блок датчика зчитує показання віброприскорення, температури, вологості та надсилає за запитом до блоку збору інформації. Комунікація відбувається у напівдуплексному режимі по протоколу Modbus-RTU. Особливістю розробки було використання мікроконтролерів STM32 компанії STmicroelectronix. Додатки містять схему електричну принципову, схему електричну структурну, лістинг програми, перелік компонентів. Робота містить сорок три формули, тридцять чотири посилань, дві друковані плати, три схеми електричні принципові, два програмних коди, дві схеми програми для двох пристроїв. Загальний обсяг пояснювальної записки 149 сторінок.
Аs part of the final work, a laboratory digital stand for vibration, humidity and temperature control was developed, which consists of two parts - sensor unit and information collection unit, sensor unit reads vibration acceleration, temperature, humidity readings and sends on request to the information collection unit. Communication takes place in half-duplex mode according to the Modbus- RTU protocol. A feature of the development was the use of STM32 microcontrollers from STmicroelectronix. Applications contain a schematic electrical diagram, electrical structural diagram, program listing, list of components. The work contains forty-three formulas, thirty-four references, two printed circuit boards, three electrical schematics, two program codes, two program diagrams for two devices. The total volume of the explanatory note is 149 pages.
Маслій, В. В., and В. Г. Здоренко. "Дослідження методів контроля температури технологічних об'єктів та виробів." Thesis, КНУТД, 2016. https://er.knutd.edu.ua/handle/123456789/5204.
Full textБуличова, К. В., and Ігор Володимирович Григоренко. "Використання нейронної мережі для контролю точності роботи лазерної системи." Thesis, Національний технічний університет "Харківський політехнічний інститут", 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/45115.
Full textПроценко, Сергій Іванович, Сергей Иванович Проценко, Serhii Ivanovych Protsenko, Михайло Валерійович Каверін, Михаил Валерьевич Каверин, and Mykhailo Valeriiovych Kaverin. "Сучасні системи контролю деформації та температури в фізичному експерименті." Thesis, Видавництво СумДУ, 2007. http://essuir.sumdu.edu.ua/handle/123456789/15220.
Full textВарян, Сергій Андрійович, and Serhii Varian. "Комп'ютеризована система для безконтактного контролю температури людей при вході в приміщення." Bachelor's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2021. http://elartu.tntu.edu.ua/handle/lib/35382.
Full textThe bachelor's thesis consists of four sections. The first section analyzes the terms of reference, and sets out the requirements for a computerized system and an analysis of possible solutions. The second section describes the process of designing and implementing a project as a computerized system for non-contact temperature control of people entering the room. The development of software for the operation of the device is given. Libraries and realization of functions built on their basis, their algorithms are considered. In the third section, the practical implementation and testing of a computerized system for non-contact temperature control of people entering the room in real operating conditions. The fourth section describes the safety of life, the basics of labor protection.
СПИСОК СКОРОЧЕНЬ. ВСТУП. РОЗДІЛ 1 АНАЛІЗ ТЕХНІЧНОГО ЗАВДАННЯ. 1.1 Основні вимоги до вимірювання температури людини. 1.2 Основні вимоги до системи. 1.3 Аналіз можливих рішень поставленого завдання. 1.3.1 Системи управління доступом в приміщення.. 1.3.2 Апаратна підтримка периферійних пристроїв для побудови комп’ютеризованої системи.. 1.3.3 Огляд можливостей мережі Lorawan. 1.3.4 Під’єднання модулів через SPI. РОЗДІЛ 2 ПРОЕКТНА ЧАСТИНА. 2.1 Розробка узагальненої структури комп’ютеризованої системи. 2.2 Обґрунтування вибору апаратного забезпечення проектованої комп'ютеризованої системи. 2.2.1 Вибір мікроконтролера Arduino Leonardo. 2.2.2 Вибір інфрачервоного вимірювача температури MLX90614. 2.2.3 Вибір зчитувача RFID міток. 2.2.4 Вибір цифрового модему Lora. 2.3 Обґрунтування вибору програмного забезпечення проектованої комп'ютерної системи. 2.3.1 Опис використовуваних бібліотек. 2.4 Проектування алгоритму роботи комп’ютеризованої системи. РОЗДІЛ 3 ПРАКТИЧНА ЧАСТИНА. 3.1 Підключення і налаштування модулів. 3.2 Налаштування шлюза LoRaWAN. 3.3 Підключення до сервера The Things Network. 3.4 Відправлення даних в сервіс The Things Network. РОЗДІЛ 4 БЕЗПЕКА ЖИТТЄДІЯЛЬНОСТІ, ОСНОВИ ОХОРОНИ ПРАЦІ. 4.1 Менеджмент безпеки. 4.2 Гігієнічні вимоги до параметрів виробничого середовища приміщень з ВДТ. ВИСНОВКИ. ПЕРЕЛІК ПОСИЛАНЬ.
Боженко, М. М., and Ігор Володимирович Григоренко. "Блок контролю параметрів технологiчного процесу виготовлення губної помади." Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/38761.
Full text