Academic literature on the topic 'Розрахунок витрат'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Розрахунок витрат.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Розрахунок витрат"
Tluchkevych N. and Nuzhna O. "ЗАСТОСУВАННЯ МАРЖИНАЛЬНОГО АНАЛІЗУ ДЛЯ ПРИЙНЯТТЯ УПРАВЛІНСЬКИХ РІШЕНЬ." Economic forum 1, no. 4 (November 24, 2021): 145–51. http://dx.doi.org/10.36910/6775-2308-8559-2021-4-20.
Full textYaroshenko, O. L. "МОДЕЛЬ ОЦІНКИ РІВНЯ ВИТРАТ ПІДПРИЄМСТВ З ПІДЗЕМНОГО ЗБЕРІГАННЯ ГАЗУ." Actual problems of regional economy development 2, no. 13 (June 26, 2017): 45–53. http://dx.doi.org/10.15330/apred.2.13.45-53.
Full textТітлов, О. С., І. Л. Бошкова, В. М. Дорошенко, В. М. Світлицький, Т. А. Сагала, and О. А. Морозов. "Аналіз енергетичних перспектив охолодження природного газу в магістральних газопроводах за допомогою абсорбційних холодильних машин." Refrigeration Engineering and Technology 57, no. 3 (October 15, 2021): 147–57. http://dx.doi.org/10.15673/ret.v57i3.2165.
Full textМарценюк, Л. В. "Розрахунок витрат та прибутку на утримання та обслуговування вузькоколійної туристичної лінії." Інвестиції: практика та досвід, no. 11, червень (2016): 41–49.
Find full textПисаренко, П. В., А. О. Тараненко, Д. В. Чальцев, О. О. Кахикало, К. Є. Гришина, and О. П. Корчагін. "ЕКОЛОГІЧНІ АСПЕКТИ МІЖРЕГІОНАЛЬНОЇ ВЗАЄМОДІЇ У СФЕРІ ПОВОДЖЕННЯ З ТВЕРДИМИ ВІДХОДАМИ (НА ПРИКЛАДІ ПРОГРАМИ РЕАБІЛІТАЦІЇ ЗАБРУДНЕНИХ ЗЕМЕЛЬ)." Вісник Полтавської державної аграрної академії, no. 4 (December 25, 2020): 120–27. http://dx.doi.org/10.31210/visnyk2020.04.14.
Full textБілецька, Н. "Розрахунок доходів і витрат банку внаслідок впровадження Національної системи масових електронних платежів." Банківська справа, no. 4 (2002): 48–58.
Find full textГоловацька, С. І. "КОНТРОЛЬ ВИКОНАННЯ БЮДЖЕТІВ: ОБЛІКОВО-ІНФОРМАЦІЙНА СКЛАДОВА КОНТРОЛІНГУ ВИТРАТ ПІДПРИЄМСТВА." Herald of Lviv University of Trade and Economics Economic sciences, no. 60 (July 3, 2020): 111–17. http://dx.doi.org/10.36477/2522-1205-2020-60-18.
Full textГАНДЗЮК, Микола, Дмитро ГАНДЗЮК, and Богдан ШУМІК. "РОЗРОБКА МЕТОДИКИ ОПЕРАТИВНОГО ПЛАНУВАННЯ РОБОТИ АВТОМОБІЛІВ НА МІЖМІСЬКИХ МАРШРУТАХ." СУЧАСНІ ТЕХНОЛОГІЇ В МАШИНОБУДУВАННІ ТА ТРАНСПОРТІ 2, no. 17 (November 14, 2021): 47–61. http://dx.doi.org/10.36910/automash.v2i17.634.
Full textDidyk, A. Z. "Облік виробничих витрат на хлібопекарських підприємствах України." Scientific Bulletin of UNFU 29, no. 8 (October 31, 2019): 93–96. http://dx.doi.org/10.36930/40290816.
Full textGlavatskhih, V. I. "ЕФЕКТИВНІСТЬ РОБОТИ СУДЕН ЗАЛЕЖНО ВІД ШВИДКІСНОГО РЕЖИМУ." Transport development, no. 4(11) (January 14, 2022): 104–15. http://dx.doi.org/10.33082/td.2021.4-11.10.
Full textDissertations / Theses on the topic "Розрахунок витрат"
Соколов, О. С. "Оптимізація витрат пального у ракеті для досягнення максимальної висоти." Thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/67046.
Full textГолодна, Катерина Олександрівна. "Розробка технології нанесення захисно–декоративного хромового покриття." Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/43155.
Full textThe project develops the technology of applying a protective and decorative chrome coating of the front adapter of the car disk with a sublayer of copper, nickel and an outer layer of chromium with a thickness of 1 micron. The three-layer covering promotes increase of corrosion resistance of details, and also gives them attractive appearance. Chromium is deposited in the self-regulating electrolyte at a cathode current density of 50 A / dm2 and a temperature of 55oC. The project provides technological calculations, as well as diagrams and drawings of the selected part and equipment, developed a scheme for automatic regulation of the chrome plating process. There are calculations of the economic part of the organization of production. The scheme of sewage treatment by the reagent method is developed, the harmful factors of production and ways of avoiding their influence at observance of safety measures are listed.
Потапська, Богдана Валентинівна. "Вдосконалення методики розрахунку витрат пального автомобілей." Магістерська робота, Хмельницький національний університет, 2021. http://elar.khnu.km.ua/jspui/handle/123456789/11616.
Full textГалюга, А. В., and А. Л. Приступа. "Щодо уточнення розрахунку технологічних витрат електричної енергії." Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/40010.
Full textПолозова, Т. В. "Розрахунок обсягу беззбитковості виробництва." Thesis, Наука і освіта, 2005. http://openarchive.nure.ua/handle/document/7978.
Full textЛюта, М. В., and І. І. Бєлов. "Актуальність розробки мобільного додатку розрахунку витрат та заощадження коштів." Thesis, Видавництво "Молодий вчений", 2020. https://er.knutd.edu.ua/handle/123456789/17738.
Full textБуславець, Ольга Анатоліївна. "Методи та засоби підвищення достовірності розрахунку та аналізу технологічних витрат електроенергії для обґрунтування їх зменшення." Thesis, НТУ "ХПІ", 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/33065.
Full textThe dissertation for the Candidate Degree (Engineering) on specialty 05.14.02 "Electric power stations, networks and systems". – Kharkiv Petro Vasilenko National Technical University of Agriculture, Kharkiv, 2017. As the values of technological electric power consumption in the process of its transportation in distribution grids of Ukraine remain high and the trend to their decrease is not observed it is necessary to continue studying the directions , aimed at their reduction in new economic conditions. One of the ways to reduce TPC is to increase reliability of TPC calculation and analysis to substantiate the choice of measures for their reduction. This concerns the need to improve methodological, informational and hardware support, and for more efficient use of electrical equipment of power systems electric grids. The dissertation is dedicated to the increase of electric grids operation efficiency by improvement of calculation and analysis methods of technological electric power consumption. It has been shown that the modernization of power sector of the economy on the basis of Smart Grid concept enables to improve significantly the controllability of the processes of generation, transportation, distribution and consumption of electric energy. Due to introduction of new technologies, the power industry adapts itself to market conditions, meeting the requirements of its integration into a United power system of Europe. The transition to a new technological platform gives the possibility to raise to a higher level of energy efficiency energy supply systems, increase the reliability, quality and economic efficiency of electric energy supply.
Буславець, Ольга Анатоліївна. "Методи та засоби підвищення достовірності розрахунку та аналізу технологічних витрат електроенергії для обґрунтування їх зменшення." Thesis, Харківський національний технічний університет сільського господарства ім. Петра Василенка, 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/33066.
Full textThe dissertation for the Candidate Degree (Engineering) on specialty 05.14.02 "Electric power stations, networks and systems". – Kharkiv Petro Vasilenko National Technical University of Agriculture, Kharkiv, 2017. As the values of technological electric power consumption in the process of its transportation in distribution grids of Ukraine remain high and the trend to their decrease is not observed it is necessary to continue studying the directions , aimed at their reduction in new economic conditions. One of the ways to reduce TPC is to increase reliability of TPC calculation and analysis to substantiate the choice of measures for their reduction. This concerns the need to improve methodological, informational and hardware support, and for more efficient use of electrical equipment of power systems electric grids. The dissertation is dedicated to the increase of electric grids operation efficiency by improvement of calculation and analysis methods of technological electric power consumption. It has been shown that the modernization of power sector of the economy on the basis of Smart Grid concept enables to improve significantly the controllability of the processes of generation, transportation, distribution and consumption of electric energy. Due to introduction of new technologies, the power industry adapts itself to market conditions, meeting the requirements of its integration into a United power system of Europe. The transition to a new technological platform gives the possibility to raise to a higher level of energy efficiency energy supply systems, increase the reliability, quality and economic efficiency of electric energy supply.
Глухов, В. Є. "Розрахунок осьових коливань ротора високонапірного високообертового насоса." Master's thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/71741.
Full textМихайлова, Ірина Олександрівна. "Розвиток методів розрахунку охолодження обертових елементів газових турбін." Thesis, Національний технічний університет "Харківський політехнічний інститут", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/38782.
Full textThe dissertation for the degree of Candidate of Technical Sciences (Ph. D.) in the specialty 05.05.16 "Turbomachine and turbine plants", (technical sciences). National Technical University "Kharkiv Polytechnical Institute", Ministry of Science and Science of Ukraine, Kharkiv, 2018. Dissertation is devoted to solving an important scientific and technical task of improving the cooling systems of gas turbines by further developing the methods of hydraulic and thermal calculation of the channels of the cooling system of gas turbines. To study the structure and flow properties of these elements, to obtain the dependences describing this flow. The analysis of scientific and technical literature devoted to the design of cooling systems for gas turbine engines was carried out, in which international experience of experimental studies and computational experiments was considered, to the study of heat transfer and flow hydrodynamics in rotating elements. As a result of the analysis of the literature, it is shown that the main direction of development of efficient and reliable GTE cooling systems is to improve the accuracy of the calculation of the flow and hydraulic characteristics of the elements of the cooling system. It is shown that the modeling of processes is influenced by the channel geometry, flow direction (centrifugal, centripetal), presence of associated flows, parameters and properties (air, oil-air) of the cooling medium. Therefore, the accuracy with which the simulation of the entire cooling system depends on the accuracy with which the individual element will be modeled. Mathematical models of hydraulic network elements have been adapted to calculate gas turbine cooling systems, such as: a device for swirling flow, a heat exchanger, channels that are moved. Description, theoretical bases of modeling of these elements of a hydraulic circuit, the researches carried out on the influence of the apparatus of the twist and the heat exchange apparatus on the efficiency of cooling are given, the corresponding models of cooling systems are made. Impact study conducted of the centrifugal effect on the possibility of air supply in the cavity of the rotor of the turbine has been studied. The considered examples of air flow in cavities formed by two parallel disks with axial or radial air supply at a peripheral radius. CFD analysis showed that, depending on the direction of air supply, the nature of the flow in the cavity is significantly changed. At radial air supply in the direction of the axis of rotation there is a non-vortex nature of the flow, with axial - vortex occurs. However, the difference in the nature of the flow almost does not affect the magnitude of the back pressure, which impedes the movement of air. The range of reliability of the results of the calculation method of the pump effect in the disk cavities of the rotors of the gas turbines is determined, namely: the ratio of the width of the cavity to the external radius of the disk does not exceed the value of 0.17, which allows us to use this method reasonably for calculations of the cooling systems. Developed a generalized approach to the method of calculating the flow coefficients and the hydraulic resistance of elements of the cooling systems of gas turbines such as openings, thickened diaphragms, labyrinth seals, regulating the flow of cooling air, which are responsible for the reliability and economy of the cooling system. In the calculations of the hydraulic circuit, the hydraulic resistance coefficients of each section of the circuit are used, and the experimental data are often represented by flow coefficients. Therefore, a connection is established between them using assumptions that take into account the difference between compressible and incompressible media. On the basis of the research, justified correction for compressibility to the coefficient of hydraulic resistance of elongated diaphragms, holes, labyrinth seals, which specifies the coefficient of hydraulic resistance to 25%. A mathematical model for calculating the bearing has been developed, approaches have been described for determining the concentration and thermodynamic characteristics of a two-phase homogeneous medium, which made it possible to include the bearing in both the hydraulic and thermal models of gas turbine cooling systems.A method was developed for calculating the hydraulic network for the air-oil mixture, which significantly expanded the possibilities for simulating the cooling processes of the rotors and bearings of gas turbines and providing bearings with oil, which made it possible to jointly calculate the cooling system of the turbine rotor and bearings. A study of the cooling system of the rotor of a high-temperature gas turbine was carried out using the developed calculation methods. It is established that the calculation methods correspond to the working data of the D-36 gas turbine engine.
Book chapters on the topic "Розрахунок витрат"
Горбачова, О. М., Л. Л. Турова, and В. В. Смілянець. "МЕХАНІЗМ ФІНАНСОВОГО УПРАВЛІННЯ БІЗНЕС-ПРОЦЕСАМИ СТАЛОГО РОЗВИТКУ АЕРОПОРТОВИХ КОМПЛЕКСІВ." In Economics, management and administration in the coordinates of sustainable development. Publishing House “Baltija Publishing”, 2021. http://dx.doi.org/10.30525/978-9934-26-157-2-16.
Full text