Academic literature on the topic 'Zápalník'

Firing pin is a critical component in terms of firearm function. Tip of firing pin can break off due to repeated impact loading, which results in malfunction of the whole firearm. This master's thesis aims to propose changes in geometry of the firing pin so that new firing pin will be more durable against fatigue failure. Geometry and characteristics of the original firing pin are provided by company Česká zbrojovka, a.s. To determine the amount of fatigue damage for specific configuration of firing pin, computational model, which simulates impact loading of the firing pin during dry fire, is created. Finite element method with explicit formulation is used for the calculation. Parameters of geometry, which are assumed to have highest influence on fatigue life, are chosen based on the analisys of the original firing pin. These parameters are changed in further calculations, resulting in new configuration of the firing pin, which is approximately 15 % more durable against fatigue failure.

The main object of this thesis is the diagnostics of the diaphragm discharge generated in water solutions containing supporting electrolytes (mostly NaCl), and description of particular processes before and after discharge breakdown by DC non-pulsed voltage up to 2 kV. Although many applications of electric discharge in liquids have been developed during the last years, the exact mechanism of the discharge ignition is not sufficiently known up to now. Based on this reason, this work is focused on the investigation of processes before the discharge ignition, breakdown parameters and the discharge itself both in the irregular and stable regime. The theoretical part of the work presents proposed mechanisms of the discharge generation in water solutions including the description of particular kinds of known discharges. Diaphragm discharge is one of many possible configurations of electrical discharges in liquids. In fact, electrical discharge in water forms non-thermal plasma, which is generated by high voltage, and many physical and chemical processes are started in plasma channels (so-called streamers). Among physical processes, high electrical field, shock waves and last but not least emission of electromagnetic radiation in visible and ultra-violet radiation belongs. The most important chemical processes are generation of various active species as hydrogen peroxide, and OH radical. Three batch plasma reactors using a diaphragm configuration with different total volume (4 l, 100 ml and 50 ml) are employed in the presented work. The discharge is created in an orifice (a pin-hole) in the dielectric barrier separating two electrode parts of the reactor. DC non-pulsed high voltage up to 4 kV is used for the discharge generation. Electrodes are made of stainless steel or platinum, and they are installed in parallel to the diaphragm in a variable distance from the dielectric barrier in each reactor part. The dielectric barrier is made of PET or Shapal-MTM ceramics with the variable thickness (0.2?2 mm). One pin hole st the diaphragm center with diameter of 0.2?1.5 mm are used in contemporary experiments. Time resolved characteristics of current and voltage are recorded using four-channel oscilloscope which detected their output values. Parameters are measured by the constantly increasing DC voltage with a step of 100 V. The solutions containing sodium chloride electrolyte are used at five different conductivities. Recorded time resolved characteristics determine breakdown moment, and describe current and voltage in particular parts within the static current-voltage curve. The breakdown appeared at lower applied voltage when the electrode distance is enhanced. However, the electrode distances higher than 4 cm does not induce any significant change of the breakdown voltage. The influence of pin-hole diameter is less obvious in the studied range, but a slight enhancement of breakdown voltage is observed with the increasing pin-hole diameter. Current-voltage characteristic curve moves towards lower voltage with the diaphragm thickness enhancement. The work compares the influence of conductivity change on current-voltage characteristics as well as the effect of inorganic salt kind. By the conductivity enhancement, the measured current-voltage curve moves towards lower voltage which means that the breakdown voltage is decreased. Sizes of the reactors do not have any effect on the processes before and after discharge breakdown.

This diploma thesis is aimed to the corona-like discharge in solutions of alcohols, specifically in ethanol, methanol, glycerol, butanol and isopropyl alcohol. The electric discharge was diagnosed by two methods. The first method was the measuring of electrical characteristics. Current-voltage characteristics were constructed from the measured average values of voltage and current. The breakdown voltages were determined from the current-voltage characteristics. The breakdown voltages of the individual alcohol solutions were dependent on the alcohol concentration, polarity of the electrodes in the reactor and solution conductivity. The breakdown voltage was determined for solutions of butanol, glycerol and isopropyl alcohol with a concentration of 20 vol. % and conductivity of 200 µS. The highest value of the breakdown voltage was determined for solution of glycerol at 580 V. The lowest voltage at which the discharge was observed was estimated for butanol (320 V), but due to the limited miscibility with water this value is inaccurate, and therefore in the second part of experiment butanol was not used. Alcohol series was supplemented with methanol. The second diagnostic method was the proton ionization mass spectrometry with the time of flight analyzer. The products formed in the reactor due to the plasma discharge were identified from the mass spectrum. Mostly, aliphatic hydrocarbons and their radicals were detected. The amount of products was observed in the dependence on the changing experimental conditions: alcohol concentration in the solution, the polarity of the electrodes in the reactor and the duration of the discharge. Only a small amount of compounds were detected in methanol. However, more molecules were formed with the increasing carbon chain in the alcohol molecule. More compounds were also detected with the increasing alcohol concentration and in case of the negative polarity of the main electrode. The formation of acetaldehyde as a typical discharge product was studied in details. Its production in time was observed and the reaction pathways of its formation in the ethanol solution were suggested.

This Diploma thesis is focused on physical and chemical effects which contribute to the decomposition of organic dyes by diaphragm discharge generated in water solutions. Due to the application of DC high voltage source in continuous regime, there is an effect of electrolysis contributing to the dye decomposition by diaphragm discharge. The aim of this work was to find out when the electrolysis is running (or when is the moment of discharge breakdown) and which factors influence the breakdown. The other goal was decomposition of selected textile and food organic dyes by electrolysis itself. In the theoretical part, theory about creation of electrical discharges in aqueous solutions is noted and various types of underwater discharges are described. Background researches about underwater electrical discharges used in the world are mentioned as well as the use of diaphragm discharges and various ways how to remove organic dyes from wastewater. Finally, theories of electrolysis, UV-VIS spectroscopy and basis of other analytical methods useful for detection of organic molecules are described. Experimental part is oriented to experiment procedure which was carried out in a reactor with separated electrode areas. Separation was made by dielectric diaphragm with a pinhole in the centre. Its initial diameter was 0.4 mm. Used chemicals and course of experiments are described in this part, too. First, the breakdown moment in the reactor was investigated (i. e. determination, when only electrolysis was operating) by formation of hydrogen peroxide and measurement of dynamic (time resolved) electrical characteristics. Next, decomposition of selected dyes by electrolysis was carried out. As the decomposition was related to decolorization of the solution, UV-VIS spectroscopy in the range of 350–700 nm was used for determination of dye concentration. Next part focused on results presents various factors which had an effect on breakdown of diaphragm discharge. These factors are kind of used electrolyte, initial conductivity of solution, kind of dye, temperature of solution and type of reactor (or solution volume). From the result, the most important factor is initial solution conductivity. After the determination of the breakdown moment, the electrolysis of organic dyes was performed. The applied current was 10 mA, initial conductivity was 500 µS/cm and used electrolyte was NaCl. Moreover comparison of dye decomposition in dependence on the different applied power was realized. From this comparison one can assume, there is no significant contribution of electrolysis (the efficiency is approximately 15 %) to the diaphragm discharge in aqueous solution.

My diploma thesis is focused on a comparison of direct-current and high frequency (15-80 kHz) electric discharge, which generates non-thermal plasma in water solution of sodium chloride. Mainly current-voltage and Lissajous charts are discussed in the first part of this thesis. These charts describe different discharge phases: electrolysis, bubble formation, discharge breakdown and discharge regular operation in a pin-hole of a dielectric barrier. Influence of frequency, electrolyte conductivity, thickness of the diaphragm (or length of the capillary) and pin-hole diameter on discharge breakdown and bubble generation was studied, too. Measurements were realized in a polycarbonate reactor with total volume of 110 ml, which was divided by a changeable polyacetal insulating wall. This wall divided the reactor into two approximately equal spaces with one stainless steel planar electrode in each part. The Shapal-MTM ceramic discs (thickness of 0.3–1.5 mm and diameter of the central pin-hole of 0.3-0.9 mm) were mounted in the centre of the insulating wall. Initial conductivity of sodium chloride solution was chosen within the interval of 100900 S/cm. The second part of my thesis compares an influence of the direct-current (DC) and high frequency (HF) power sources on physical solution properties (conductivity, pH and temperature) and generation of hydrogen peroxide. A plasma reactor with total volume of 4 l and with mixing set up was divided into two equal spaces with one planar platinum electrode in each part. Diaphragm with thickness of 0.6 mm and pin-hole diameter of 0.6 mm was installed in the middle of the separating wall. Experiment was held at discharge operation of 45 W for 40 minutes with both power sources. Detection of hydrogen peroxide was realised by using a titanium reagent forming a yellow complex, which was analysed by absorption spectroscopy. If HF discharge power is plotted as a function of applied frequency, exponential decrease of frequency with increasing power can be observed. Higher breakdown voltage is necessary for thicker dielectric barriers, on the other hand for bigger diameter of the pin-hole lower breakdown voltage and higher power is needed in DC as well as in HF regime. Breakdown voltage is decreased by the increasing conductivity in both regimes; due to more charge carriers in the higher conductivity lower breakdown voltage is needed. However frequency in HF regime and DC discharge power increases. HF discharge power is decreased by the increasing conductivity. Solution conductivity and temperature are increased by initial conductivity value in both discharge regimes. Solution pH drops to acidic conditions when HF or DC positive regime is applied due to the generation of reactive species and electrolysis (in DC regime). However solution becomes alkaline when DC negative regime is applied. Concentration of hydrogen peroxide is produced linearly when HF or DC negative regime is applied and it depends on initial solution conductivity.

The exact mechanism of the discharge in liquids ignition is not sufficiently known up to now. Although during the last years was achieved the great progress and overloading which some of them are written in this theoretical part of thesis. This thesis is divided into two experimental parts. When the first part deals with diagnostics of diaphragm discharge in electrolyte solutions and the second part is focused on its use for uncoiling (higher homogenization) of carbon nanotubes in solutions. In experiment 1, three different sized (4 l, 100 ml, 50 ml) diaphragm discharge configurations were used to diagnose diaphragm discharge in electrolyte solutions. Diagnostics is done through current and voltage waveforms with the addition of synchronized ICCD camera images that have been connected to a four-channel oscilloscope. The V-A characteristic can be described by three events occurring in the electrolyte solution with a gradual increase in voltage. Slowly increasing of the voltage in the solution leads first to electrolysis. The next phase is the formation of microbubbles or bubbles, which is characteristic of the curve by a slight decrease in the increase of the current passing between electrodes. The sudden increase in the current flow is characteristic of the last phase, namely the discharge phase. The distance of the electrodes from the diaphragm does not significantly affect the V-A characteristic. The higher diameter of the pin hole, therefore, has a higher voltage, but this does not affect the origin of bubble generation or breakdown. The higher thickness of diaphragm, the higher voltage is needed to the beginning of the bubbles generation, and consequently the discharge breakdown. Comparison of the voltage of the start generation of the bubbles and breakdown for PET diaphragms and diaphragms from the ceramic there was no mark able difference. One of the most important parameters is the conductivity of the electrolyte solution. The lower voltage is needed for the start generation of the bubbles at the higher solution conductivity, and also the discharge generation is observed at a lower breakdown voltage. The second experimental part is focused on the study of the diaphragm discharge effect on carbon nanotubes. A specially designed U-shaped reactor is used to modify carbon nanoparticles. Tap water and aqueous solutions of organic compounds are used as the electrolytic solutions. The discharge is generated by a non-pulsed DC high source with a voltage in the range of 0-2.8 kV supplied to platinum electrodes located in the electrolyte solution. The experimental results have shown that the diaphragm discharge has positive effects on the disintegration of clusters and agglomerates of carbon nanotubes. The primary effect on disintegration is probably the shock waves generated by the discharge. It turned out that it depends on the electrode configuration, where the treatment in anode space has far greater effects than the treatment in cathode half of the reactor. Effects of carbon nanotubes disintegration in solution are long-lasting and the treatment effect is not loosed after several months. There were detected no significant changes in the structure of plasma-treated nanotubes by Infra-red spectroscopy.

The focus of this thesis will be an exegesis of the term burnt offering in Old Testament. The diploma thesis deals with the location of the cult (Tent of Meeting, temple), priests in Israel, human offerings and reconstruction of ritual burnt offerings with an evaluation of particular acts based on translation and interpretation of the first chapter of Leviticus. The purpose of this work is to detect, what function and meaning this ritual had for the community of Israel, as well as what message the texts contain, with respect to burnt offerings for the current reader.