Academic literature on the topic 'XML transmission methods'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'XML transmission methods.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "XML transmission methods"
1
Zorriassatine, F., B. Ashraf, L. Notini, R. M. Parkin, M. R. Jackson, and J. Coy. "Smarter maintenance through internet-based condition monitoring with indirect sensing, novelty detection, and XML." Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 219, no. 4 (June 1, 2005): 283–93. http://dx.doi.org/10.1243/095965105x9605.
Full textAbstract:
In engineering, combining a number of solutions and technologies can result in more effective systems than using only one approach on its own. In particular, it has been shown that in condition monitoring (CM), smarter maintenance systems may be obtained by integrating various sensors together. This paper extends this idea by integrating various non-homogeneous technologies horizontally. The proposed system is an internet-based condition monitoring (e-CM) prototype that can identify abnormal tension in moving belts. It is shown that by applying a classification technique, known as novelty detection, it is possible to decide the status of belt tension by processing the belt vibration signals from an optical sensor (i.e. an indirect sensing approach). A novel method for industrial network communication using XML to create a single standard format for sensor information is also used to link the sensor to the process controller via the internet using the flexible CAN bus technology; this is used together with low-cost microcontrollers with a built-in ethernet link for data acquisition and transmission. The resulting integrated approach is more efficient because: (a) it can reduce waste by minimizing process interruptions caused by direct belt inspection methods while obtaining high detection accuracy (99.67 per cent) and (b) it can provide on-line remote CM that is cost-effective, simple, standardized, and scalable across a wide area and for a relatively large number of sensors. This improvement is especially important when applied to bottleneck processes and critical components.
2
Iqbal, Taufiq, and Syarifuddin Syarifuddin. "Pengembangan Repository berbasis Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) pada Standar Metadata Encoding and Transmission Standard (METS) dan MPEG-21 Digital Item Declaration Language (DIDL)." Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi) 4, no. 2 (December 6, 2020): 7. http://dx.doi.org/10.35870/jtik.v5i1.161.
Full textAbstract:
The purpose of this research is to build a repository model and feature the Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) and the Metadata Encoding and Transmission Standard (METS) and MPEG-21 Digital Item Declaration Language (DIDL). The research model used is qualitative research and methods. Application development used is Fourth Generation Techniques (4GT). From the results of the development of the repository by involving the Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) module on the Metadata Encoding and Transmission Standard (METS) and MPEG-21 Digital Item Declaration Language (DIDL), it has been applied to the repository application that was built. The test results using the OAI-PMH URL using the OVAL validator tool found that there were no problems and problems in validating and verifying data in the Identify, ListMetadataFormats, ListSets, ListIdentifiers, ListRecords, and XML Validation commands. While the test results show the success rate in crawling each metadata in the web repository, the average success rate of crawling metadata by Google Scholar is 90%, while the error is known to be 10% because some documents do not have complete metadata such as bibliography and uploaded documents.
3
Shen, Jie, Jingyi Zhou, Jiemin Zhou, Lukas Herman, and Tomas Reznik. "Constructing the CityGML ADE for the Multi-Source Data Integration of Urban Flooding." ISPRS International Journal of Geo-Information 9, no. 6 (May 30, 2020): 359. http://dx.doi.org/10.3390/ijgi9060359.
Full textAbstract:
Urban flooding, as one of the most serious natural disasters, has caused considerable personal injury and property damage throughout the world. To better cope with the problem of waterlogging, the experts have developed many waterlogging models that can accurately simulate the process of pipe network drainage and water accumulation. The study of urban waterlogging involves many data types. These data come from the departments of hydrology, meteorology, planning, surveying, and mapping, etc. The incoordination of space–time scale and format standard has brought huge obstacles to the study of urban waterlogging. This is not conducive to interpretation, transmission, and visualization in today’s network environment. In this paper, the entities and attributes related to waterlogging are defined. Based on the five modules of urban drainage network, sub basin, dynamic water body, time series, and meteorological data, the corresponding UML (Unified Modeling Language) model is designed and constructed. On this basis, the urban waterlogging application domain extension model city waterlogging application domain extension (CTWLADE) is established. According to the characteristics of different types of data, two different methods based on FME object and citygml4j are proposed to realize the corresponding data integration, and KML (Keyhole Markup Language) /glTF data organization form and the corresponding sharing method are proposed to solve the problem that the CTWLADE model data cannot be visualized directly on the web and cannot interact in three-dimensional format. To evaluate the CTWLADE, a prototype system was implemented, which can convert waterlogging-related multi-source data in extensible markup language (XML) files conform. The current CTWLADE can map the data required and provided by the hydraulic software tool storm water management model (SWMM) and is ready to be integrated into a Web 3D Service to provide the data for 3D dynamic visualization in interactive scenes.
4
Warner, Jeremy, Kevin S. Hughes, John C. Krauss, Suzanne Maddux, Peter Paul Yu, and Edward P. Ambinder. "An interoperable HL7 document standard to improve the quality of cancer care across multiple locations." Journal of Clinical Oncology 31, no. 31_suppl (November 1, 2013): 12. http://dx.doi.org/10.1200/jco.2013.31.31_suppl.12.
Full textAbstract:
12 Background: Cancer care is by nature interdisciplinary and increasingly depends on seamless electronic transmission of clinical data. Health information exchange and semantic understanding are critical for improved outcomes, personalized medicine, comparative effectiveness research, and cost control. While there is a growing focus on this, sharing patient information remains difficult due to a lack of standardization and general incompatibility between electronic health record products. There is a need for well-designed, oncology-specific interoperability standards. Thus ASCO is developing standards to improve the quality and insight of cancer care. Methods: ASCO volunteers formed a Standards Work Group (Standards WG) in 2012, and ASCO engaged an independent consulting firm to perform the technical work. The Standards WG first developed an interoperable standard with broad application that would also be a foundation for future standards work. They adapted ASCO’s Breast Cancer Adjuvant Treatment Plan and Summary (Breast TPS), which was originally developed as a paper-based form. This adaptation required extensive work involving input from medical and surgical oncologists, ASCO staff, and the consultants. This preparatory work was vital to define and disambiguate clinical concepts. Some value sets in the original Breast TPS were replaced with National Cancer Institute value sets. Multiple oncology and standards stakeholders reviewed the draft to ensure accurate representation of the data and harmonization with related standards. Results: The standard was developed using the Health Level Seven International (HL7) Clinical Document Architecture, a widely used XML-based markup standard with national and international recognition. The draft Breast Cancer Adjuvant Treatment Plan and Summary Standard was successfully balloted through HL7 in May 2013 and will subsequently be published for trial use in late 2013. Conclusions: The Breast Cancer Adjuvant Treatment Plan and Summary Standard will improve quality by allowing providers to efficiently transmit clinical data with semantic meaning to health professionals, patients, quality improvement initiatives, and registries.
5
van Leeuwen, M., J. A. N. van Aardt, T. Kampe, and K. Krause. "A BOX-COUNTING METHOD TO CHARACTERIZE DEGREES OF FOLIAGE CLUMPING USING AIRBORNE AND SIMULATED LIDAR DATA." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XL-7/W3 (April 30, 2015): 1325–31. http://dx.doi.org/10.5194/isprsarchives-xl-7-w3-1325-2015.
Full textAbstract:
Monitoring forest productivity and health is key to sustainable ecosystem management and informed decision making. A key parameter used in monitoring forest resources is the leaf area index (LAI), which is defined as the one-sided leaf area per unit ground area and is used to describe the canopy radiation regime, among other forest biophysical dynamics. Traditional optics-based methods to estimate LAI rely on the measurement of canopy transmission and foliage clumping. Extending optical methods to LiDAR data has been challenging and studies have reported effective LAI assessments, with no further quantification of foliage clumping. This study investigates the use of the box-counting method to assess the fractal dimension of point cloud data for contrasting forest types and along a gradient of foliage dispersal. We demonstrate the box-counting method on simulated ‘range-to-hit’, as well as acquired airborne discrete LiDAR data. Coherent results obtained from the different test cases hint at the potential of the box-counting fractal dimension to characterize foliage clumping and bode well for the use of clumping assessments in support of airborne, wall-to-wall estimates of LAI.
6
Zychowska, Magdalena, Ewelina Rojewska, Anna Piotrowska, Grzegorz Kreiner, and Joanna Mika. "Microglial Inhibition Influences XCL1/XCR1 Expression and Causes Analgesic Effects in a Mouse Model of Diabetic Neuropathy." Anesthesiology 125, no. 3 (September 1, 2016): 573–89. http://dx.doi.org/10.1097/aln.0000000000001219.
Full textAbstract:
Abstract Background Recent studies indicated the involvement of some chemokines in the development of diabetic neuropathy; however, participation of the chemokine-C-motif ligand (XCL) subfamily remains unknown. The goal of this study was to examine how microglial inhibition by minocycline hydrochloride (MC) influences chemokine-C-motif ligand 1 (XCL1)–chemokine-C-motif receptor 1 (XCR1)/G protein–coupled receptor 5 expression and the development of allodynia/hyperalgesia in streptozotocin-induced diabetic neuropathy. Methods The studies were performed on streptozotocin (200 mg/kg, intraperitoneally)-induced mouse diabetic neuropathic pain model and primary glial cell cultures. The MC (30 mg/kg, intraperitoneally) was injected two times daily until day 21. XCL1 and its neutralizing antibody were injected intrathecally, and behavior was evaluated with von Frey and cold plate tests. Quantitative analysis of protein expression of glial markers, XCL1, and/or XCR1 was performed by Western blot and visualized by immunofluorescence. Results MC treatment diminished allodynia (0.9 ± 0.1 g; n = 7 vs. 3.8 ± 0.7 g; n = 7) and hyperalgesia (6.5 ± 0.6 s; n = 7 vs. 16.5 ± 1 s; n = 7) in the streptozotocin-induced diabetes. Repeated MC administration prevented microglial activation and inhibited the up-regulation of the XCL1/XCR1 levels. XCL1 administration (10 to 500 ng/5 μl; n = 9) in naive mice enhanced nociceptive transmission, and injections of neutralizing XCL1 (4 to 8 μg/5 μl; n = 10) antibody into the mice with diabetic neuropathic pain diminished allodynia/hyperalgesia. Microglia activation evoked in primary microglial cell cultures resulted in enhanced XCL1 release and XCR1 expression. Additionally, double immunofluorescence indicated the widespread coexpression of XCR1-expressing cells with spinal neurons. Conclusions In diabetic neuropathy, declining levels of XCL1 evoked by microglia inhibition result in the cause of analgesia. The putative mechanism corroborating this finding can be related to lower spinal expression of XCR1 together with the lack of stimulation of these XCR1 receptors, which are localized on neurons.
7
Benatti, S., M. Damasso, F. Borsa, D. Locci, I. Pillitteri, S. Desidera, A. Maggio, et al. "Constraints on the mass and on the atmospheric composition and evolution of the low-density young planet DS Tucanae A b." Astronomy & Astrophysics 650 (June 2021): A66. http://dx.doi.org/10.1051/0004-6361/202140416.
Full textAbstract:
Context. Observations of young close-in exoplanets are providing initial indications for the characteristics of the population and clues to the early stages of their evolution. Transiting planets at young ages are also key benchmarks for our understanding of planetary evolution via the verification of atmospheric escape models. Aims. We performed radial velocity (RV) monitoring of the 40 Myr old star DS Tuc A with HARPS at the ESO-3.6 m to determine the planetary mass of its 8.14-day planet, which was first revealed by the NASA TESS satellite. We also observed two planetary transits with HARPS and ESPRESSO at ESO-VLT to measure the Rossiter-McLaughlin (RM) effect and characterise the planetary atmosphere. We measured the high-energy emission of the host with XMM-Newton observations to investigate models for atmospheric evaporation. Methods. We employed a Gaussian Processes (GP) regression to model the high level of the stellar activity, which is more than 40 times larger than the expected RV planetary signal. GPs were also used to correct the stellar contribution to the RV signal of the RM effect. We extracted the transmission spectrum of DS Tuc A b from the ESPRESSO data and searched for atmospheric elements and molecules either by single-line retrieval and by performing cross-correlation with a set of theoretical templates. Through a set of simulations, we evaluated different scenarios for the atmospheric photo-evaporation of the planet induced by the strong XUV stellar irradiation. Results. While the stellar activity prevented us from obtaining a clear detection of the planetary signal from the RVs, we set a robust mass upper limit of 14.4 M⊕ for DS Tuc A b. We also confirm that the planetary system is almost (but not perfectly) aligned. The strong level of stellar activity hampers the detection of any atmospheric compounds, which is in line with other studies presented in the literature. The expected evolution of DS Tuc A b from our grid of models indicates that the planetary radius after the photo-evaporation phase will be 1.8–2.0 R⊕, falling within the Fulton gap. Conclusions. The comparison of the available parameters of known young transiting planets with the distribution of their mature counterpart confirms that the former are characterised by a low density, with DS Tuc A b being one of the less dense. A clear determination of their distribution is still affected by the lack of a robust mass measurement, particularly for planets younger than ~100 Myr.
8
Alby, E. "Point cloud vs drawing on archaeological site." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XL-5/W7 (August 11, 2015): 7–11. http://dx.doi.org/10.5194/isprsarchives-xl-5-w7-7-2015.
Full textAbstract:
Archaeology is a discipline closely related to the representation of objects that are at the center of its concerns. At different times of the archaeological method, representation approach takes different forms. It takes place on the archaeological excavation, during the exploration, or in a second time in the warehouse, object after object. It occurs also in different drawing scales. The use of topographical positioning techniques has found its place for decades in the stratigraphic process. Plans and sections are thus readjusted to each other, on the excavation site. These techniques are available to the archaeologist since a long time. The most of the time, a qualified member of the team performs himself these simple topographical operations. The two issues raised in this article are: three-dimensional acquisition techniques can they, first find their place in the same way on the excavation site, and is it conceivable that it could serve to support the representation? The drawing during the excavations is a very time-consuming phase; has it still its place on site? Currently, the drawing is part of the archaeological stratigraphy method. It helps documenting the different layers, which are gradually destroyed during the exploration. Without systematic documentation, any scientific reasoning cannot be done retrospectively and the conclusions would not be any evidence. Is it possible to imagine another way to document these phases without loss compared to the drawing? Laser scanning and photogrammetry are approved as acquisition techniques. What can they bring more to what is already done for archaeologists? Archaeological practice can be seen as divided into two parts: preventive archeology and classical archeology. The first has largely adopted the techniques that provide point clouds to save valuable time on site. Everything that is not destroyed by the archaeological approach will be destroyed by the building construction that triggered the excavations. The practice of classical archeology by academics is less governed by the on-site timesaving. The excavation is also the place of the transmission of knowledge and the time spent is beneficial to students. But experimenting with the production of point clouds by archaeologists of emergency can influence the practices of archeology as a whole. An experiment is ongoing on the Saint-Hilarion Monastery site in the Gaza Strip. Each layer of a stratigraphic excavation area was documented by photogrammetry. This project was the means to transfer knowledge related to photogrammetry to allow the archaeologist to document the stratigraphic layers one after the other. Indeed it is essential that this documentation is systematic and not dependent on the availability of specialist in photogrammetry. The risks related to possible wrong practices of photogrammetry by archaeologist are identified, and solutions are proposed. Monitoring means of photogrammetric missions must be established to allow complete and usable documentation. The methods implemented are already applied on other archaeological sites and help save precious time on site.
9
Ma, Hetong, Liu Shen, Haixia Sun, Zidu Xu, Li Hou, Sizhu Wu, An Fang, Jiao Li, and Qing Qian. "COVID term: a bilingual terminology for COVID-19." BMC Medical Informatics and Decision Making 21, no. 1 (August 3, 2021). http://dx.doi.org/10.1186/s12911-021-01593-9.
Full textAbstract:
Abstract Background The coronavirus disease (COVID-19), a pneumonia caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has shown its destructiveness with more than one million confirmed cases and dozens of thousands of death, which is highly contagious and still spreading globally. World-wide studies have been conducted aiming to understand the COVID-19 mechanism, transmission, clinical features, etc. A cross-language terminology of COVID-19 is essential for improving knowledge sharing and scientific discovery dissemination. Methods We developed a bilingual terminology of COVID-19 named COVID Term with mapping Chinese and English terms. The terminology was constructed as follows: (1) Classification schema design; (2) Concept representation model building; (3) Term source selection and term extraction; (4) Hierarchical structure construction; (5) Quality control (6) Web service. We built open access for the terminology, providing search, browse, and download services. Results The proposed COVID Term include 10 categories: disease, anatomic site, clinical manifestation, demographic and socioeconomic characteristics, living organism, qualifiers, psychological assistance, medical equipment, instruments and materials, epidemic prevention and control, diagnosis and treatment technique respectively. In total, COVID Terms covered 464 concepts with 724 Chinese terms and 887 English terms. All terms are openly available online (COVID Term URL: http://covidterm.imicams.ac.cn). Conclusions COVID Term is a bilingual terminology focused on COVID-19, the epidemic pneumonia with a high risk of infection around the world. It will provide updated bilingual terms of the disease to help health providers and medical professionals retrieve and exchange information and knowledge in multiple languages. COVID Term was released in machine-readable formats (e.g., XML and JSON), which would contribute to the information retrieval, machine translation and advanced intelligent techniques application.
Dissertations / Theses on the topic "XML transmission methods"
1
Ridgewell, Alexander Graham, and n/a. "A Method for Efficient Transmission of XML Data across a Network." University of Canberra. School of Information Sciences & Engineering, 2007. http://erl.canberra.edu.au./public/adt-AUC20070801.151913.
Full textAbstract:
Extensible Markup Language (XML) is a simple, very flexible text format derived from SGML (ISO 8879), which is a well defined, public standard. It uses plain text to encode a hierarchical set of information using verbose tags to allow the XML document to be understood without any special reader. The use of schemas in XML also allows a well defined contract describing what a single XML document means. The self-contained nature of XML and the strong contract provided by its schemas makes it useful as an archival storage format and as a means of communicating across system or organizational boundaries. As such XML is being increasingly used by businesses throughout the world. These businesses use XML as a means of storing, transmitting and (with the use of style sheets) displaying information.
The simple, well defined structure of XML does present some problems when it is used by businesses and similar organizations. As it is an open, plain text based standard care must be taken when looking at security. The use of plain text with verbose tags also results in XML documents that are far larger than other means of storing the same information.
This thesis focuses on the affect of the large size of XML when it is used to communicate across a network. This large size can often increase the time taken to transmit the document and we were interested to see how it could be minimized. we investigated the ways that are used to control the size of XML documents and how they are transmitted.
We carefully investigated by implementing solutions on how to transmit the XML document. We then first presented a new method, called dynamic adaptive threshold transmission (DATT), in comparisons with other existing similar methods, which, under the discussed conditions, offers significant improvements in transmission times and network transmission efficiencies.
Book chapters on the topic "XML transmission methods"
1
Rabadi, Yousef E., and Joan Lu. "Building a Secured XML Real-Time Interactive Data Exchange Architecture." In Ontologies and Big Data Considerations for Effective Intelligence, 327–412. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-2058-0.ch008.
Full textAbstract:
TCP and UDP communication protocols are the most widely used transport methods for carrying out XML data messages between different services. XML data security is always a big concern especially when using internet cloud. Common XML encryption techniques encrypt part of private sections of the XML file as an entire block of text and apply these techniques directly on them. Man-in-the-Middle and Cryptanalysts can generate statistical information, tap, sniff, hack, inject and abuse XML data messages. The purpose of this study is to introduce architecture of new approach of exchanging XML data files between different Services in order to minimize the risk of any alteration, data loss, data abuse, data misuse of XML critical business data information during transmission; by implementing a vertical partitioning on XML files. Another aim is to create a virtual environment within internet cloud prior to data transmission in order to utilise the communication method and rise up the transmission performance along with resources utilisation and spreads the partitioned XML file (shredded) through several paths within multi agents that form a multipath virtual network. Virtualisation in cloud network infrastructure to take advantage of its scalability, operational efficiency, and control of data flow are considered in this architecture. A customized UDP Protocol in addition to a pack of modules in RIDX adds a reliable (Lossless) and Multicast data transmission to all nodes in a virtual cloud network. A comparative study has been made to measure the performance of the Real-time Interactive Data Exchange system (RIDX) using RIDX UDP protocol against standard TCP protocol. Starting from 4 nodes up to 10 nodes in the domain, the results showed an enhanced performance using RIDX architecture over the standard TCP protocol.
2
Rabadi, Yousef E., and Joan Lu. "Building a Secured XML Real-Time Interactive Data Exchange Architecture." In Research Anthology on Architectures, Frameworks, and Integration Strategies for Distributed and Cloud Computing, 270–357. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-5339-8.ch013.
Full textAbstract:
TCP and UDP communication protocols are the most widely used transport methods for carrying out XML data messages between different services. XML data security is always a big concern especially when using internet cloud. Common XML encryption techniques encrypt part of private sections of the XML file as an entire block of text and apply these techniques directly on them. Man-in-the-Middle and Cryptanalysts can generate statistical information, tap, sniff, hack, inject and abuse XML data messages. The purpose of this study is to introduce architecture of new approach of exchanging XML data files between different Services in order to minimize the risk of any alteration, data loss, data abuse, data misuse of XML critical business data information during transmission; by implementing a vertical partitioning on XML files. Another aim is to create a virtual environment within internet cloud prior to data transmission in order to utilise the communication method and rise up the transmission performance along with resources utilisation and spreads the partitioned XML file (shredded) through several paths within multi agents that form a multipath virtual network. Virtualisation in cloud network infrastructure to take advantage of its scalability, operational efficiency, and control of data flow are considered in this architecture. A customized UDP Protocol in addition to a pack of modules in RIDX adds a reliable (Lossless) and Multicast data transmission to all nodes in a virtual cloud network. A comparative study has been made to measure the performance of the Real-time Interactive Data Exchange system (RIDX) using RIDX UDP protocol against standard TCP protocol. Starting from 4 nodes up to 10 nodes in the domain, the results showed an enhanced performance using RIDX architecture over the standard TCP protocol.
Conference papers on the topic "XML transmission methods"
1
Thomson, Barbara A., and Norman J. Armendariz. "X-ray Laminography Benchmarking and Failure Analysis of Solder Joint Interfaces." In ISTFA 2003. ASM International, 2003. http://dx.doi.org/10.31399/asm.cp.istfa2003p0120.
Full textAbstract:
Abstract A new generation X-ray laminography (XRL) automated Xray inspection (AXI) tool was evaluated for surface mount technology (SMT) assembly defect detection and was qualified using formal “benchmark” comparative analysis processes. In addition, defect characterization was performed using the XRL AXI system in manual X-ray inspection mode to correlate various failure modes and mechanisms at SMT solder joint interfaces for selected non-destructive failure analyses and technology development. Since ball grid array (BGA) solder joint quality is a great concern in board assembly, test technology development and failure analysis teams explored the use of XRL AXI as a method to detect and monitor BGA ball abnormalities using XRL AXI-generated solder ball images and measurements. It was found that XRL AXI was able to successfully discern differences in the shape, location and diameter of the suspect BGA solder balls from XRL AXI horizontal image planes (slices) for physical failure analysis and reliability issues not previously detected using conventional X-ray transmission or electrical methods. Subsequent metallographic x-sectioning correlated the XRL AXI mages to the physical condition of the suspected second level interconnect (SLI) solder joint location.
2
Albers, Albert, Alexander Schwarz, and Matthias Behrendt. "Integrated Approach for System Oriented Analyses and Optimization of Complex Hybrid Powertrain Applications by Means of Vehicle-in-the-Loop Roller Test Bench." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62943.
Full textAbstract:
Central activity in the development process of automotive drive systems is the validation to meet the customers’ demands. Thereby the transmission topology as well as the operation and drive strategy and their independencies have a great influence on the comfort and the energy efficiency of the vehicle. Especially in modern drivelines, like in hybrid electric vehicles there are great independencies between those factors, which have to be considered and integrated in order to achieve a global optimum. In this contribution an integrated validation and development environment with the focus on hybrid transmission applications is presented. This approach is capable to integrate and consider aspects of complex powertrain systems, as hybrid powertrains, and to cover the competing aspects of NVH, drivability as well as energy efficiency. The approach is an integral combination of new or already published as well as established individual methods that have been extended with challenging aspects of hybrid powertrain development. One integrated method is the time-efficient arrangement of measuring points in order to shorten the global needed conditioning phases. For gearshift evaluation of a dual clutch transmission, this reduces operation time on the roller test bench about 80% compared to an experienced test driver [1]. The integrated approach uses system identification to create time and cost efficient test runs for the test based optimization [2]. Thereby advanced methods for rating the drivability and for automatic identification of NVH-Phenomena [3] are used to optimize multi criteria objective functions. The measurement is done in the IPEK-X-in-the-Loop Framework (XiL) [4], which enables a transmission assessment on the complete vehicle level.