Dissertations / Theses: 'Wood-pulp industry Tasmania Waste disposal'

1

Carpenter, Andrew. "An Evaluation of Pulp Sludge as a Component In Manufactured Topsoils." Fogler Library, University of Maine, 1998. http://www.library.umaine.edu/theses/pdf/Carpenter.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Long, Xiaoping. "Minimum effluent process for pulp mill." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/11825.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Trosok, Steve Peter Matyas. "Mediated biochemical oxygen demand biosensors for pulp mill wastewaters." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape2/PQDD_0030/MQ64470.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bhinge, Deepak. "Color removal from pulp and paper wastes by coagulation." Thesis, Virginia Tech, 1986. http://hdl.handle.net/10919/41569.

Full text

Abstract:

Coagulation studies were conducted to determine an appropriate treatment approach to remove color and organic carbon from the pulp and paper wastes from the Union Camp Corporation, Franklin, Va.

Based on a preliminary analysis of the data collected during this research, either alum or ferric chloride may be used to remove color from pulp and paper wastes. An effluent with final residual color less than 5 color units can be generated using PAC treatment after flocculating certain waste streams with alum or ferric chloride. Higher molecular weight organics (above 5K mass units) showed a near complete removal by coagulation.

It is expected that alum coagulation would involve a lesser cost in pH adjustment as compared to ferric chloride coagulation. Alum sludge dewatered and thickened more rapidly than the iron sludge; however, after mechanical dewatering, the alum cake had a slightly greater moisture content than the sludge produced after ferric chloride coagulation.

Master of Science

APA, Harvard, Vancouver, ISO, and other styles

5

Neufeld, Josh D. "Development of a quantitative method for functional gene detection in pulp and paper wastewater treatment systems." Thesis, McGill University, 2000. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=33430.

Full text

Abstract:

The recent development of culture-independent methods has revolutionized the study of complex microbial communities such as those present in activated sludge treatment systems. DNA probes that hybridize to genes coding for key enzymes that catalyze microbial processes have been widely used. Can such probes be used to quantify target genes and thus quantify the potential of a microbial community to carry out a reaction of interest?
Optimal conditions for DNA extraction, probe validation, hybridization, and activity measurements were determined for the pulp and paper treatment system environment under study. Using gene probes for key denitrification genes (nirS, nirK), the correlation between denitrifiers and denitrification activity in an enrichment culture and activated sludge samples was tested. The same correlation between nitrogen fixation and nitrogen-fixing bacteria in primary clarifiers was assessed using a probe for the gene encoding a component of the nitrogenase enzyme (nifH). This work was successful in establishing the correlation between gene numbers and their corresponding enzymatic activity and thus supports the quantitative hybridization approach for the monitoring of microbial communities. (Abstract shortened by UMI.)

APA, Harvard, Vancouver, ISO, and other styles

6

Ganta, Madhuri. "Anaerobic digestion of pulp and paper mill solid wastes : evaluation of operational parameters and microbial diversity." Diss., Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/27081.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Frigon, Dominic. "Molecular and phenotypic characterization of the microbial communities in two pulp and paper wastewater treatment systems." Thesis, McGill University, 1998. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=29803.

Full text

Abstract:

Phylogenetic hybridization and phenotypic fingerprinting were applied to the analysis of bacterial communities in wastewater treatment systems. These approaches were aimed at (i) developing monitoring tools able to foresee operational problems, and (ii) providing the rationale to optimize the operation of bioreactors. The work presented is intended to first describe the community found in two reactors treating pulp and paper mill effluent, and second evaluate the possibilities of these techniques with respect to the development of new monitoring tools.
Phylogenetic membrane hybridization showed that the bacterial communities were dominated by Alpha and Beta Proteobacteria, a structure probably linked to the low F:M ratio. Other important factors determining the community structure were the proportion of COD in the high molecular weight fraction, the sludge age, phosphate addition, and the concentration of specific compounds (alcohols, phenols, volatile fatty acids) in the influent. The community structure partly determined the sludge characteristics demonstrating its potential value in the assessment of reactor performance. The results obtained by phylogenetic membrane hybridization suggest that the probes used in a monitoring tool would not need to be targeted to the species level to provide relevant information. However, they also suggest that the technique is more sensitive to changes in population density as opposed to changes in bacterial metabolism.
Phenotypic fingerprinting measured a smaller difference between the communities of the two reactors studied than what was measured by phylogenetic membrane hybridization. However, differences in heterotrophic activities observed between the two communities were linked to differences in influent composition.

APA, Harvard, Vancouver, ISO, and other styles

8

Joyce, Jim. "Color and TOC removal from pulp and paper wastes by ultrafiltration." Thesis, Virginia Polytechnic Institute and State University, 1986. http://hdl.handle.net/10919/91035.

Full text

Abstract:

Ultrafiltration studies were conducted to determine a treatment approach to remove color and organic carbon from the pulp and paper wastewaters at the Union Camp Corporation, Franklin, VA. Analysis of data collected during this research indicate that ultrafiltration can produce an effluent with less than 5 color units and less than 5 mg/L TOC (99% and 97% removal respectively). The data also indicate that biotreatment of the wastes prior to ultrafiltration removes the smaller molecular weight organic compounds, making ultrafiltration more effective. Pretreatment by pH adjustment and alum coagulation were not effective in improving ultrafiltration performance. Concentration studies indicate that volume reductions up to 95% may be accomplished without excessive membrane fouling. Membrane cleaning with caustic, hypochlorite and detergent produced identical results. It is expected that ultrafiltration would be a more cost effective method of color and TOC removal than coagulation, and would not require sludge disposal.
M.S.

APA, Harvard, Vancouver, ISO, and other styles

9

Fortin, Nathalie. "Molecular characterization of dechlorination potential in kraft pulp mill effluent treatment systems." Thesis, McGill University, 1996. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=27317.

Full text

Abstract:

Many low molecular weight chlorinated organic compounds produced by the pulp and paper industry during kraft bleaching of the wood pulp are toxic. Mass balance studies suggest that mineralization of chlorinated organics is occurring in pulp and paper mill wastewater treatment systems. To understand the nature of dechlorination activity, molecular tools such as oligonucleotide primers and corresponding DNA probes were developed to monitor the presence of microorganisms possessing key genes (dehalogenases) responsible for the degradation of chloroaliphatic organics in kraft pulp mill effluent treatment systems. Oligonucleotide primers designed from the coding sequence of known dehalogenases and a methane monooxygenase gene, which is known to catalyze dehalogenation reactions, were used for polymerase chain reaction (PCR) analysis, using genomic DNA extracted from dehalogenating bacterial isolates and total community DNA extracted from water and sediments of lagoon treatment systems. PCR amplification with dhlB oligonucleotide primers, designed from the haloacid dehalogenase of Xanthobacter autotrophicus, revealed the presence of dehalogenase genes in both aerated lagoons and stabilization basins. Similar results were obtained with mmoX primers designed from the methane monooxygenase gene of Methylococcus capsulatus. DNA sequence analysis of several PCR fragments showed significant similarity to known dehalogenase genes. The molecular tools developed in this study revealed the presence of different types of microorganisms with dechlorination potential in the microbial community of pulp mill effluents.

APA, Harvard, Vancouver, ISO, and other styles

10

Gauthier, Francis. "Study of coliform bacteria in Canadian pulp and paper mill water systems : their ecology and utility as health hazard indicators." Thesis, McGill University, 2000. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=33401.

Full text

Abstract:

Coliform bacteria have long been used to indicate fecal contamination of food, water, and solid surfaces, and thus the presence of a health hazard. In this study, the in-mill water and external effluent treatment systems of seven typical Canadian pulp and paper mills were shown to support the growth of numerous coliforms, especially Klebsiella spp, Escherichia coli, Enterobacter spp., and Citrobacter spp . Mill coliforms were shown to be not just simple transients from feedwater or furnish (wood), but to be continuously growing, especially in the primary clarifiers. Therefore, coliforms and fecal coliforms cannot be used as fecal contamination indicators in pulp and paper mill water and effluent treatment systems.
N2-fixing coliform populations were detected in mill water systems and were analyzed using N2-fixation assays and nitrogenase gene (nifH) probing. Both active in situ populations and cultured microbial isolates were tested. Active N2-fixation was demonstrated in six primary clarifiers. Measurement of the numbers and composition of the total culturable bacterial community in a primary clarifier revealed that approximately 50% of all aerobic cells contained nifH , of which >90% were Klebsiella. Coliforms growing on MacConkey agar plates from the primary clarifier were all identified as Klebsiella and 100% of these Klebsiella contained the nifH gene. Preliminary estimates indicate that the amount of N2 fixed per day is substantial in some clarifiers.

APA, Harvard, Vancouver, ISO, and other styles

11

Bhathena, Jasmine. "The physical and physiological effects of nitrogen and phosphorus limitation on a pulp and paper mill effluent biotreatment microbial community /." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=80228.

Full text

Abstract:

The influence of nitrogen (N) and phosphorus (P) limitation on pulp and paper mill activated sludge (AS) floc properties was studied using a bioreactor fed with synthetic Kraft mill effluent. The bioreactor and synthetic effluent were designed and shown to perform like the real mill system providing the AS, establishing the in vivo relevance of the results. Limitation of either N or P produced inadequate effluent biotreatment, shown by poor BOD5 and suspended solids removal, and by decreased biomass health, performance, and floc settling. Greatly enhanced poly-beta-hydroxybutyrate (PHB) (but not carbohydrate or extracellular polymeric substances [EPS]) synthesis was the common response of the floc microbial community to N limitation over many days. In contrast, P-limitation increased total carbohydrate and EPS, but not PHB.
N limitation, but not P limitation, caused the net floc surface charge to be much more negative, while P-limitation, but not N-limitation, increased the floc bound water content and surface hydrophobicity. Thus, in real pulp and paper mill AS systems, careful manipulation of N or P additions may be useful to optimize the key process of charged polymer-assisted AS dewatering.

APA, Harvard, Vancouver, ISO, and other styles

12

Rigby, Tracey. "Development of a capillary electrophoretic method for the separation and detection of resin acids." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape2/PQDD_0035/MQ64439.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Pouliot, Cédrick. "Acetate and poly-b-hydroxybutyrate (PHB) metabolism by the activated sludge floc community of a hardwood Kraft pulp and paper mill." Thesis, McGill University, 2005. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=82401.

Full text

Abstract:

This research followed acetate carbon (C) uptake, metabolism, and fate through a typical modern Kraft pulp and paper mill AS system. Freshly collected mill biomass (AS floc suspensions) was placed under conditions representing four key phases of AS biotreatment: (1) initial acetate uptake by aerated starved AS; (2) ongoing acetate uptake; (3) aerobic metabolism of acetate-loaded AS in acetate-stripped effluent; and (4) anaerobic, settled biomass metabolism. Conditions mimicked the mill system as closely as possible. Acetate carbon uptake kinetics and conversion to CO2, growth products, PHB, and secreted metabolites in each of the four phases were measured. The role of PHB synthesis in the initial stripping of acetate from mill effluent and the PHB production potential of this mill AS were also investigated.
Results showed that acetate was rapidly taken up by high-affinity systems in the AS. During the initial exposure of mill-starved AS, acetate greatly stimulated AS-O2 uptake, and was quickly converted to PHB and CO 2. Upon depletion of available effluent acetate, as occurs in the downstream sections of the aeration tank, O2-uptake rates decreased and the acetate-C stored in AS-PHB was slowly released as CO2, and partly used for growth. Under secondary clarifier-like anaerobic conditions, the AS released virtually no CO2. However, substantial amounts of PHB were used for growth under anaerobic conditions and a small proportion of the original acetate C exited the cells as organic acids.

APA, Harvard, Vancouver, ISO, and other styles

14

Williams, Chris L. "In-situ biodegradation study using ³⁶Cl labeled bleaching filtrates." Diss., Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/7072.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Boussaid, Abdellatif. "Pulp-mill effluent color removal using Sagenomella striatispora." Thesis, 1995. http://hdl.handle.net/1957/34626.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Moodley, Brenda. "Characterisation of SAPPI SAICCOR pulp mill's effluent." Thesis, 2001. http://hdl.handle.net/10413/5610.

Full text

Abstract:

SAPPI SAJCCOR, whose factory is situated south of Durban, South Africa, is one of the few paper and pulp mills that uses the acid sulphite process with calcium and magnesium bases to produce a high-grade cellulose pulp. Four streams of effluent, namely, the calcium - spent liquor stream, the magnesium condensate stream and two streams from the bleaching effluent are produced during this sulphite pulping process and they contain a variety of organic compounds extracted from the wood. Characterisation of the effluent was based on isolation using column chromatography and identification using NMR techniques. A range of constituents, such as lignans and lignin - type precursors, a trilerpenoid and fatty acids were isolated and identified. X-ray diffraction was used to identify an inorganic residue obtained from the calcium - spent liquor stream and gas chromatography/mass spectrometry was used to identify a wax residue. which builds up in the process. In addition to this, the carbohydrate content of the four streams of effluent was detennined using UV/visiblc spectroscopy.
Thesis (M.Sc.)-University of Natal, Durban, 2001.

APA, Harvard, Vancouver, ISO, and other styles

17

Hossain, Belayet. "Kinetic design of free water surface constructed wetlands for treatment of pulp mill effluent." Thesis, 1993. http://hdl.handle.net/1957/36355.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Lesley, Dawn. "Potential of a fungus, Acremonium sp., to decolorize pulp mill effluent." Thesis, 1993. http://hdl.handle.net/1957/35771.

Full text

Abstract:

This project explored the feasibility of using fungi in a constructed wetland for the treatment of pulp mill effluent. The effluent is high in dissolved lignins (some of which are chlorinated), which have proven very difficult to degrade biologically. Mindful of work done with the (terrestrial) white rot fungi, especially Phanerochaete chtysosporium, the question is asked, Is there a fungus which can tolerate submerged conditions while degrading a significant amount of dissolved lignins? Two fungal species with lignin-degrading capability were isolated from submerged films in a log pond. These fungi have been evaluated for decolorization potential under different environmental conditions. Results of laboratory experiments show that one of these fungi, identified as Acremonium sp., was capable of 44% decolorization of pulp mill effluent under sterile, submerged, room temperature conditions. The fungal decolorization was evaluated both in floating cultures and as a film inoculated on wood chips. In addition, bench-scale examination of the potential of this fungus to decolorize pulp mill effluent in non-sterile conditions was completed.
Graduation date: 1994

APA, Harvard, Vancouver, ISO, and other styles

19

Ismail, Fathima. "An analysis of Sappi Saiccor's effluent streams." Thesis, 2003. http://hdl.handle.net/10413/4046.

Full text

Abstract:

SAPPI SAICCOR is a pulp and paper mill situated in Umkomaas, 50 kms south of the port of Durban in South Africa. It was the first company to produce high grade dissolving pulp from the Eucalyptus tree and is currently the world's largest manufacturer of chemical cellulose. SAICCOR is one of the few pulp and paper mills that produces its dissolving pulp by the acid sulphite process using both calcium and magnesium as bases in the form of calcium bisulphite and magnesium bisulphite. Four streams of effluent are produced during their process, namely, the calcium spent liquor, the magnesium pulp condensate and two streams from the bleaching stages. An acid hydrolysis of the effluent streams yielded a range of organic compounds such as lignans and lignin - type precursors as well as a triterpenoid. Column chromatography and thin layer chromatography, using various ratios of hexane, dichloromethane, ethyl acetate and methanol, were carried out in isolating and purifying the compounds. The structures of these compounds were determined using NMR spectroscopic and mass spectrometric techniques.
Thesis (M.Sc.)-University of Natal, Durban, 2003.

APA, Harvard, Vancouver, ISO, and other styles

20

Reddy, Prenaven. "Investigations on aerobic thermophilic treatment of pulp mill effluent." Thesis, 2004. http://hdl.handle.net/10321/2764.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Negash, Asnake Worku. "Application of statistical multivariate techniques to wood quality data." Thesis, 2010. http://hdl.handle.net/10413/5015.

Full text

Abstract:

Sappi is one of the leading producer and supplier of Eucalyptus pulp to the world market. It is also a great contributor to South Africa economy in terms of employment opportunity to the rural people through its large plantation and export earnings. Pulp mills production of quality wood pulp is mainly affected by the supply of non uniform raw material namely Eucalyptus tree supply from various plantations. Improvement in quality of the pulp depends directly on the improvement on the quality of the raw materials. Knowing factors which affect the pulp quality is important for tree breeders. Thus, the main objective of this research is first to determine which of the anatomical, chemical and pulp properties of wood are significant factors that affect pulp properties namely viscosity, brightness and yield. Secondly the study will also investigate the effect of the difference in plantation location and site quality, trees age and species type difference on viscosity, brightness and yield of wood pulp. In order to meet the above mentioned objectives, data for this research was obtained from Sappi’s P186 trial and other two published reports from the Council for Scientific and Industrial Research (CSIR). Principal component analysis, cluster analysis, multiple regression analysis and multivariate linear regression analysis were used. These statistical analysis methods were used to carry out mean comparison of pulp quality measurements based on viscosity, brightness and yield of trees of different age, location, site quality and hybrid type and the results indicate that these four factors (age, location, site quality and hybrid type) and some anatomical and chemical measurements (fibre lumen diameter, kappa number, total hemicelluloses and total lignin) have significant effect on pulp quality measurements.
Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2010.

APA, Harvard, Vancouver, ISO, and other styles

22

West, D. W. "Responses of wild freshwater fish to anthropogenic stressors in the Waikato River of New Zealand." 2007. http://adt.waikato.ac.nz/public/adt-uow20070828.145414/index.html.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

McPherson, Mamosa Eileen. "Participatory monitoring and evaluation of marine water quality, a case study of Sappi Saiccor, Umkomaas." Thesis, 2002. http://hdl.handle.net/10413/4599.

Full text

Abstract:

Previously, issues concerning the use and conservation of the natural resources were restricted to certain groups of individuals, normally those considered to be scientific experts. However with the emergence of sustainable development and the adoption of its principles therein, there has been increased community concern over environmental quality issues resulting in pressure for transparency in environmental decision-making processes. The result has been a dramatic expansion in the number of organisations at the local, national and global scales committed to environmental improvement. This in turn has let to dramatic changes in the role of the public in decisions relating to natural resource management. Participatory development is now acknowledged as critical in achieving sound environmental management. The initiation of community-based environmental decision-making has led to the formation of new and interesting partnerships. Environmentalists, communities, policy makers and business people have begun to work together in an attempt to find consensus concernIng environmental problems and related socio-economic inequalities. This has resulted in the development of new ways of integrating local and scientific knowledge systems. This thesis illustrates community-based environmental decision-making in the management of the use of the south coast of Durban. It outlines a partnership, through the formation of the Permit Advisory Panel (PAP), comprising industry (Sappi Saiccor), government, through its Department of Water Affairs and Forestry, environmental organisations, and the local people in the monitoring of the impacts of effluent produced by the industry and disposed of into the sea. The aim of this thesis is to develop an alternative methodology that will be acceptable to all stakeholders, for the collection and analysis of data in the monitoring of the Sappi Saiccor effluent. This was achieved through the following objectives: to develop a methodology for the collection and analysis of data, to assess the performance of the new pipeline in terms of reduced aesthetic impacts of the effluent, to assess the role of local knowledge in the monitoring process, and finally to assess the role of this study in the functioning of the PAP. This thesis attempts to integrate qualitative and quantitative methodologies. The subjective local data collected by the divers is analysed using statistical methods to assess the impacts of the effluent on marine water quality and the effect the new pipeline has had in reducing these impacts. Qualitative surveys such as questionnaires and interviews were administered to assess the role of local knowledge in the monitoring process and also to assess the role this study has had in the functioning of the PAP. The statistical analysis did not reveal any major improvement in underwater visibility since the pipeline was extended. There is a 6% and 4% improvement in the number of effluent days and visibility respectively. This however is due to some limitations inherent in the data collection process, and as a result the improvement brought about by the pipeline extension has been toned down. An effluent and visibility index is therefore recommended as an alternative method of data collection and analysis to reduce the level of inaccuracy. The role of local knowledge is perceived by many of the PAP members as vital in the monitoring process. This study was therefore thought of as an important step in validating this local knowledge such that it can be a reliable data source to be used in the monitoring process. It also played an important role in resolving the conflict between the PAP members. It is therefore recommended that the divers data should be continually used in the monitoring process, though the divers have to be more actively involved. The PAP is therefore tasked with liasing with the community members, especially the divers such that they can assume a more active and responsible role within the PAP. They should be involved in the development of the methods of data collection and analysis.
Thesis (M.A.)-University of Natal, Durban, 2002.

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic 'Wood-pulp industry Tasmania Waste disposal'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles