Journal articles: 'WIRELESS MESS NETWORK'

1

Kaur, Navpreet. "Implementation of Security of Wireless Mess Network from Denial of Service Attack." International Journal for Research in Applied Science and Engineering Technology 6, no. 2 (February 28, 2018): 501–5. http://dx.doi.org/10.22214/ijraset.2018.2100.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Li, Zhi, and Qi Zhu. "Genetic Algorithm-Based Optimization of Offloading and Resource Allocation in Mobile-Edge Computing." Information 11, no. 2 (February 3, 2020): 83. http://dx.doi.org/10.3390/info11020083.

Full text

Abstract:

Mobile edge computing (MEC) can use a wireless access network to serve smart devices nearby so as to improve the service experience of users. In this paper, a joint optimization method based on the Genetic Algorithm (GA) for task offloading proportion, channel bandwidth, and mobile edge servers’ (MES) computing resources is proposed in the scenario where some computing tasks can be partly offloaded to the MES. Under the limitation of wireless transmission resources and MESs’ processing resources, GA was used to solve the optimization problem of minimizing user task completion time, and the optimal offloading task strategy and resource allocation scheme were obtained. The simulation results show that the proposed algorithm can effectively reduce the task completion time and ensure the fairness of users’ completion times.

APA, Harvard, Vancouver, ISO, and other styles

3

Talele, Ajay, Prajyot Mehta, Yogesh Gadade, Avinash Mundhe, and Akshay Kandhare. "A QoS-Aware Multipath Routing Protocol for Wi-Fi Based Long Distance Mesh Networks." Asian Journal of Science and Applied Technology 7, no. 1 (May 5, 2018): 44–46. http://dx.doi.org/10.51983/ajsat-2018.7.1.1018.

Full text

Abstract:

Routing plays a crucial role in provisioning Quality of Service (QoS) over WiFi-based Long Distance (WiLD) mesh networks. Traditional routing protocols normally maintain a single optimal path between each pair of source and destination nodes. In gateway-based mesh networks, the optimal paths between gateway and other nodes often overlap and hence degrades the overall network performance significantly. Multipath routing protocols are widely used in Wireless Mess Networks (WMN) for providing QoS to various network applications. Smooth routing of real time traffic with varying QoS requirements is a challenging task. In this paper, we propose a QoS-aware hybrid multipath routing protocol which can discover multiple maximally disjoint paths between a gateway and any other node. The gateway node selects n-best paths for the source node. Before starting a given real time flow, a path selection scheme chooses the appropriate path or set of paths amongst the available discovered paths. To evenly distribute the traffic among the paths chosen, an admission control mechanism has been proposed. In case of significant change in the quality of any discovered paths, a path maintenance process induces the source node to trigger a route update process. The proposed protocol enhances the performance of real time traffic significantly. The simulation results show that the proposed protocol achieves significant improvement in different QoS parameters. With the increase in number of disjoint paths from source to destination, a substantial improvement in throughput and delay is observed.

APA, Harvard, Vancouver, ISO, and other styles

4

Chishti, Abdul Rehman, Abdul Aziz, Muhammad Ali Qureshi, Muhammad Nawaz Abbasi, Abdullah M. Algarni, Azzedine Zerguine, Niamat Hussain, and Rifaqat Hussain. "Optically Transparent Antennas: A Review of the State-of-the-Art, Innovative Solutions and Future Trends." Applied Sciences 13, no. 1 (December 24, 2022): 210. http://dx.doi.org/10.3390/app13010210.

Full text

Abstract:

The requirement of mounting several access points and base stations is increasing tremendously due to recent advancements and the need for high-data-rate communication services of 5G and 6G wireless communication systems. In the near future, the enormous number of these access points might cause a mess. In such cases, an optically transparent antenna (OTA) is the best option for making the environment more appealing and pleasant. OTAs provide the possible solution as these maintain the device aesthetics to achieve transparency as well as fulfill the basic coverage and bandwidth requirements. Various attempts have been made to design OTAs to provide coverage for wireless communication, particularly for the dead zones. These antennas can be installed on building windows, car windscreens, towers, trees, and smart windows, which enables network access for vehicles and people passing by those locations. Several transparent materials and techniques are used for transparent antenna design. Thin-film and mesh-grid techniques are very popular to transform metallic parts of the antenna into a transparent material. In this article, a comprehensive review of both the techniques used for the design of OTAs is presented. The performance comparison of OTAs on the basis of bandwidth, gain, transparency, transmittance, and efficiency is also presented. An OTA is the best choice in these situations to improve the aesthetics and comfort of the surroundings with high antenna performance.

APA, Harvard, Vancouver, ISO, and other styles

5

Muhammad, Dicky, Gita Indah Hapsari, and Giva Andriana Mutiara. "An Experimental Connectivity Performance of Simple Wireless Mesh Implementation Using Wireless Distribution System (WDS)." IJAIT (International Journal of Applied Information Technology) 1, no. 02 (August 14, 2017): 18–27. http://dx.doi.org/10.25124/ijait.v1i02.871.

Full text

Abstract:

Today wireless technology grows rapidly, especially in the field of telecommunications and communications. Computer networks now widely utilizes wireless. Wireless Mesh Network is one of the method which is use to communicate computer wirelessly. One important factor in application of wireless network is how to extend wireless signal coverage. Wireless Distribution System is one way to expand the wireless network by mean of wireless interconnection of access point on the network IEEE 8022.11. This study suggests how to build a simple wireless computer network using WDS technology and describes connectivity performance and its signal coverage. The test result of connectivity performance shows that the connectivity between two computers work properly for reliability and multi SSID testing. However, the connectivity was not success in multichannel testing. Furthermore the test result of coverage shows that the range of wireless signal coverage reaches 39 meters with different circumstance room.

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, Xinheng. "Wireless mesh networks." Journal of Telemedicine and Telecare 14, no. 8 (December 2008): 401–3. http://dx.doi.org/10.1258/jtt.2008.008003.

Full text

Abstract:

Wireless telemedicine using GSM and GPRS technologies can only provide low bandwidth connections, which makes it difficult to transmit images and video. Satellite or 3G wireless transmission provides greater bandwidth, but the running costs are high. Wireless networks (WLANs) appear promising, since they can supply high bandwidth at low cost. However, the WLAN technology has limitations, such as coverage. A new wireless networking technology named the wireless mesh network (WMN) overcomes some of the limitations of the WLAN. A WMN combines the characteristics of both a WLAN and ad hoc networks, thus forming an intelligent, large scale and broadband wireless network. These features are attractive for telemedicine and telecare because of the ability to provide data, voice and video communications over a large area. One successful wireless telemedicine project which uses wireless mesh technology is the Emergency Room Link (ER-LINK) in Tucson, Arizona, USA. There are three key characteristics of a WMN: self-organization, including self-management and self-healing; dynamic changes in network topology; and scalability. What we may now see is a shift from mobile communication and satellite systems for wireless telemedicine to the use of wireless networks based on mesh technology, since the latter are very attractive in terms of cost, reliability and speed.

APA, Harvard, Vancouver, ISO, and other styles

7

Wicaksono, Arief Ikhwan, Rama Sahtyawan, and Agung Priyanto. "Komparasi Analisa Kinerja Mesh Interface Dan Bridge Interface Pada Wireless WDS Mesh Network." JISKA (Jurnal Informatika Sunan Kalijaga) 5, no. 1 (May 19, 2020): 36. http://dx.doi.org/10.14421/jiska.2020.51-05.

Full text

Abstract:

Wireless mesh networking provides a solution to the problem of network distribution that has been constrained by cable networks and wireless networks that are not directly related to other wireless networks. Some of the advantages of wireless mesh technology include extended coverages, robustness, self-configuration, easy maintenance, and low cost. Based on the problems described in the previous paragraph, this research will analyze the performance of two wireless mesh distribution methods using several topology scenarios which will later be considered to affect the quality of network distribution WDS Mesh distribution methods that will be compared in this study are WDS Mesh with Mesh Interface, and WDS Mesh with Bridge Interface. Evaluation of the two methods will be conducted periodically to get the results of the analysis which will be used to do re-configuring to maximize the features and advantages of mesh technology in maintaining reliable network quality.

APA, Harvard, Vancouver, ISO, and other styles

8

Pulyala, Ranjith. "Localized Network Reconfiguration Plan for Wireless Mesh Networks." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (April 30, 2022): 779–805. http://dx.doi.org/10.22214/ijraset.2022.41305.

Full text

Abstract:

Abstract: Wireless mesh networks (WMNs) have emerged as a key technology for next-generation wireless networking. Because of their advantages over other wireless networks, WMNs are undergoing rapid progress and inspiring numerous applications. In multi-hop wireless mesh networks (WMNs) experience frequent link failures caused by channel interference, dynamic obstacles and/or applications’ bandwidth demands. These failures cause severe performance degradation in WMNs or require expensive, manual network management for their real-time recovery. This paper presents an Autonomous network Reconfiguration System (ARS) that enables a multi-radio WMN to autonomously recover from local link failures to preserve network performance. ARS also improves channel efficiency by more than 90% over the other recovery methods. During their lifetime, multi-hop wireless mesh networks (WMNs) experience frequent link failures caused by channel interference, dynamic obstacles, and/or applications’ bandwidth demands. These failures cause severe performance degradation in WMNs or require expensive manual network management for their real-time recovery. By using channel and radio diversities in WMNs, ARS generates necessary changes in local radio and channel assignments in order to recover from failures. Next, based on the thus-generated configuration changes, the system cooperatively reconfigures network settings among local mesh routers. ARS has been evaluated extensively through ns2-based simulation. Our evaluation results show that ARS outperforms existing failure-recovery schemes in improving channel-efficiency by more than 90% and in the ability of meeting the applications’ bandwidth demands by an average of 200%. Keywords: WMN, ARS, AODV, WCETT, ETT, RSVP, DSDV, ETX, ETOPE, BLC

APA, Harvard, Vancouver, ISO, and other styles

9

Jin, YanLiang, HuiJun Miao, Quan Ge, and Chi Zhou. "Expected Transmission Energy Route Metric for Wireless Mesh Senor Networks." International Journal of Digital Multimedia Broadcasting 2011 (2011): 1–7. http://dx.doi.org/10.1155/2011/947396.

Full text

Abstract:

Mesh is a network topology that achieves high throughput and stable intercommunication. With great potential, it is expected to be the key architecture of future networks. Wireless sensor networks are an active research area with numerous workshops and conferences arranged each year. The overall performance of a WSN highly depends on the energy consumption of the network. This paper designs a new routing metric for wireless mesh sensor networks. Results from simulation experiments reveal that the new metric algorithm improves the energy balance of the whole network and extends the lifetime of wireless mesh sensor networks (WMSNs).

APA, Harvard, Vancouver, ISO, and other styles

10

Megat Mohamed Noor, Megat Norulazmi. "Cell-based intrusion detection using wireless mesh network." International Journal of Academic Research 5, no. 5 (October 10, 2013): 94–99. http://dx.doi.org/10.7813/2075-4124.2013/5-5/a.12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Assegie, Tsehay Admassu, and Pramod Sekharan Nair. "The performance of Gauss Markov’s mobility model in emulated software defined wireless mesh network." Indonesian Journal of Electrical Engineering and Computer Science 18, no. 1 (April 1, 2020): 428. http://dx.doi.org/10.11591/ijeecs.v18.i1.pp428-433.

Full text

Abstract:

Wireless mesh networks (WMNs) are a new trend in wireless communication promising greater flexibility, reliability, and performance over traditional wireless local area networks (WLANs).Test bed analysis and emulation plays an important role in evaluation of wireless networks and node mobility is the prominent feature of next generation wireless network. In this paper we will focus on the models of wireless station mobility and discuss their importance within the software defined wireless mesh network performance evaluation. The existing mobility models for the next generation software defined wireless network will be explored. Finlay, we will present the mobility models in the mininet-Wi-Fi test bed, and evaluate the performance of the models

APA, Harvard, Vancouver, ISO, and other styles

12

Mu, Rui Hui. "The Application of Wireless Sensor Networks in Power Engineering." Advanced Materials Research 986-987 (July 2014): 1673–76. http://dx.doi.org/10.4028/www.scientific.net/amr.986-987.1673.

Full text

Abstract:

The fast evolution of computer technology, sensor technology, MEMS and modern wireless communication technology has impelled development of wireless sensor networks. Wireless sensor networks are consist of a large number of nodes which can be capable of communicating, computing and cooperation in ad hoc model. In this paper, we study the application of wireless sensor networks in power engineering. A device for remote monitoring of electric towers is designed. This paper proposes the implementations of remote wireless centralized electricity meter reading based on wireless sensor network.

APA, Harvard, Vancouver, ISO, and other styles

13

Mu, Rui Hui. "The Application of Wireless Sensor Networks in Power Engineering." Applied Mechanics and Materials 494-495 (February 2014): 1880–83. http://dx.doi.org/10.4028/www.scientific.net/amm.494-495.1880.

Full text

Abstract:

The fast evolution of computer technology, sensor technology, MEMS and modern wireless communication technology has impelled development of wireless sensor networks. Wireless sensor networks are consist of a large number of nodes which can be capable of communicating, computing and cooperation in ad hoc model. In this paper, we study the application of wireless sensor networks in power engineering. A device for remote monitoring of electric towers is designed. This paper proposes the implementations of remote wireless centralized electricity meter reading based on wireless sensor network.

APA, Harvard, Vancouver, ISO, and other styles

14

Shang, Zhi Jun, Shi Jie Cui, and Qiu Shi Wang. "Network Calculus Based Dimensioning for Industrial Wireless Mesh Networks." Applied Mechanics and Materials 303-306 (February 2013): 1989–95. http://dx.doi.org/10.4028/www.scientific.net/amm.303-306.1989.

Full text

Abstract:

Wireless Mesh network is widely adopted in both wideband mobile communication network and short distance RF industrial network. As for the latter field, network robustness and real-time are two important issues. Network dimensioning is therefore required for this kind of networks. We models wireless mesh network as four tuples and present a topology transform methodology to change the mesh topology to a cluster tree. Research results from network calculus theory are then applied to obtain key merits such as buffer requirement, bandwidth requirement and end to end delay bound.

APA, Harvard, Vancouver, ISO, and other styles

15

Katti, Sachin, Dina Katabi, Hari Balakrishnan, and Muriel Medard. "Symbol-level network coding for wireless mesh networks." ACM SIGCOMM Computer Communication Review 38, no. 4 (October 2008): 401–12. http://dx.doi.org/10.1145/1402946.1403004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Lv, Pin, Xudong Wang, and Ming Xu. "Virtual access network embedding in wireless mesh networks." Ad Hoc Networks 10, no. 7 (September 2012): 1362–78. http://dx.doi.org/10.1016/j.adhoc.2012.03.016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Fang, Chang, Zhifang Feng, and Chao Zuo. "Utilization and Balance in Channel Assignment for Rural Wireless Mesh Networks." Journal of Advanced Computational Intelligence and Intelligent Informatics 22, no. 6 (October 20, 2018): 800–808. http://dx.doi.org/10.20965/jaciii.2018.p0800.

Full text

Abstract:

Wireless mesh networks with directional antennas are expected to be a new promising technology and an economic approach for providing wireless broadband services in rural areas. In these networks, the effective use of multiple non-overlapping channels can significantly enhance the network capacity by allowing more concurrent transmissions. However, the performances of wireless mesh networks are severely degraded by interference between links with overlapping channels in nearby areas. In this paper, we address the issue of joint utilization and balance in channel assignment for rural wireless mesh networks. We design a new channel assignment framework with the goal of optimizing the channel resource utilization across the entire network while taking balanced allocation into account. This balanced channel assignment allows for the cost-effective reuse of channels without a consequent loss of quality in the rural wireless mesh networks. We also evaluate the proposed framework on some Cartesian product graphs that are popular interconnection network topologies. The framework guarantees that these topologies require a small number of channels for balanced allocation.

APA, Harvard, Vancouver, ISO, and other styles

18

Megat Mohamed Noor, Megat Norulazmi. "Community based home security system using wireless mesh network." International Journal of Academic Research 5, no. 5 (October 10, 2013): 73–79. http://dx.doi.org/10.7813/2075-4124.2013/5-5/a.9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Kumari, Usha, and Udai Shankar. "COORDINATED DISTRIBUTED SCHEDULING IN WIRELESS MESH NETWORK." INTERNATIONAL JOURNAL OF COMPUTERS & TECHNOLOGY 3, no. 3 (November 22, 2012): 368–74. http://dx.doi.org/10.24297/ijct.v3i3a.2940.

Full text

Abstract:

IEEE 802.16 based wireless mesh networks (WMNs) are a promising broadband access solution to support flexibility, cost effectiveness and fast deployment of the fourth generation infrastructure based wireless networks. Reducing the time for channel establishment is critical for low latency/interactive Applications. According to IEEE 802.16 MAC protocol, there are three scheduling algorithms for assigning TDMA slots to each network node: centralized and distributed the distributed is further divided into two operational modes coordinated distributed and uncoordinated distributed. In coordinated distributed scheduling algorithm, network nodes have to transmit scheduling message in order to inform other nodes about their transfer schedule. In this paper a new approach is proposed to improve coordinated distributed scheduling efficiency in IEEE 802.16 mesh mode, with respect to three parameter Throughput, Average end to end delay and Normalized Overhead. For evaluating the proposed networks efficiency, several extensive simulations are performed in various network configurations and the most important system parameters which affect the network performance are analyzed

APA, Harvard, Vancouver, ISO, and other styles

20

Elzain and Wu. "Software Defined Wireless Mesh Network Flat Distribution Control Plane." Future Internet 11, no. 8 (July 25, 2019): 166. http://dx.doi.org/10.3390/fi11080166.

Full text

Abstract:

Wireless Mesh Networks (WMNs), have a potential offering relatively stable Internet broadband access. The rapid development and growth of WMNs attract ISPs to support users’ coverage anywhere anytime. To achieve this goal network architecture must be addressed carefully. Software Defined Networking (SDN) proposes new network architecture for wired and wireless networks. Software Defined Wireless Networking (SDWN) has a great potential to increase efficiency, ease the complexity of control and management, and accelerate technology innovation rate of wireless networking. An SDN controller is the core component of an SDN network. It needs to have updated reports of the network status change, as in network topology and quality of service (QoS) in order to effectively configure and manage the network it controls. In this paper, we propose Flat Distributed Software Defined Wireless Mesh Network architecture where the controller aggregates entire topology discovery and monitors QoS properties of extended WMN nodes using Link Layer Discovery Protocol (LLDP) protocol, which is not possible in multi-hop ordinary architectures. The proposed architecture has been implemented on top of POX controller and Advanced Message Queuing Protocol (AMQP) protocol. The experiments were conducted in a Mininet-wifi emulator, the results present the architecture control plane consistency and two application cases: topology discovery and QoS monitoring. The current results push us to study QoS-routing for video streaming over WMN.

APA, Harvard, Vancouver, ISO, and other styles

21

Alsaadi, Mohsen S., and Naif D. Alotaibi. "Routing Protocols Design and Performance Evaluation in Wireless Mesh Networks." International Journal of Technology Diffusion 10, no. 1 (January 2019): 60–74. http://dx.doi.org/10.4018/ijtd.2019010104.

Full text

Abstract:

The wireless mesh networks (WMNs) have become one of the popular technologies of the wireless network utilization. WMN provides reliable and scalable wireless network because of its features such as dynamic self-organizing, self-configuring, Self-managing and self-healing. Routing protocols play an essential role in finding and establishing an active route from a source to a destination in WMNs. This article focuses on the performance evaluation and comparison of some routing protocols commonly used in WMNs for VoIP application: AODV, DSR, OLSR and TORA has been investigated over client Wireless Mesh Networks based on OPNET simulation in a different network sizes and mobility. This article presents a background of some designs and solutions based on an elaborated simulation investigation. The performance comparisons are carried out with regard to the node variation in network sizing and mobility. Based on the empirical outputs, the authors suggested that to utilize a specific routing protocol in certain situations.

APA, Harvard, Vancouver, ISO, and other styles

22

Alsaadi, Mohsen S., and Naif D. Alotaibi. "Routing Protocols Design and Performance Evaluation in Wireless Mesh Networks." International Journal of Technology Diffusion 10, no. 1 (January 2019): 81–95. http://dx.doi.org/10.4018/ijtd.2019010105.

Full text

Abstract:

The wireless mesh networks (WMNs) have become one of the popular technologies of the wireless network utilization. WMN provides reliable and scalable wireless network because of its features such as dynamic self-organizing, self-configuring, Self-managing and self-healing. Routing protocols play an essential role in finding and establishing an active route from a source to a destination in WMNs. This article focuses on the performance evaluation and comparison of some routing protocols commonly used in WMNs for VoIP application: AODV, DSR, OLSR and TORA has been investigated over client Wireless Mesh Networks based on OPNET simulation in a different network sizes and mobility. This article presents a background of some designs and solutions based on an elaborated simulation investigation. The performance comparisons are carried out with regard to the node variation in network sizing and mobility. Based on the empirical outputs, the authors suggested that to utilize a specific routing protocol in certain situations.

APA, Harvard, Vancouver, ISO, and other styles

23

Tian, Qi Ming, and Hao Yu Meng. "Analysis and Comparison of Routing Metrics for Multi-Interface Wireless Mesh Networks." Advanced Materials Research 268-270 (July 2011): 1856–61. http://dx.doi.org/10.4028/www.scientific.net/amr.268-270.1856.

Full text

Abstract:

The development of wireless broadband access in multimedia field has a higher requirement on wireless mesh networks’ performance. The design of routing metric is the key to improve the performance of wireless mesh networks. How to make full use of multi-interface technology in routing metric design to improve the network capacity has become a research focus. This article first analyzes the requirements of multi-interface wireless mesh networks on routing metric design, then analyzes strengths and weaknesses of nine routing metrics applied in wireless mesh networks currently, and finally compares the conditions of nine routing metrics capturing different performance indicators of wireless networks. As routing metrics like WCETT, MIC, WCETT-LB, IAWARE, ILA, MI and IDA all take channel interference problems into account, they are more suitable for multi-interface wireless mesh networks.

APA, Harvard, Vancouver, ISO, and other styles

24

Rahim Al-juaifari, Mohammad Khalaf, Hussain Mumtaiz Alshamy, and Noor Hassan Abed Khammas. "Power enhancement based link quality for wireless mesh network." International Journal of Electrical and Computer Engineering (IJECE) 11, no. 2 (April 1, 2021): 1388. http://dx.doi.org/10.11591/ijece.v11i2.pp1388-1394.

Full text

Abstract:

Energy consumption of wireless network communication is still a big issue and a lot of research papers have proposed many solutions to increase node life time. The WMN architecture is made up of a fixed and mobile component, whereas the wireless mesh networks (WMNs) are multi-hop wireless networks with instant deployment, self-healing, self-organization and self-configuration features. The reduction in the distance by a factor of two can result in at least four times more powerful signals at the receiver. This paper presents suggestions that the links are more reliable without the increase in power of the transmitter in individual nodes. As a result, the present simulations networks are nine mobile nodes for considering coverage issues of the service area. The analytic results show that the link power node for direct communication between two nodes with long distance consuming more power than it is cleared. The improvement in the network performance for maintaining is available and this solution can be used to implement mobility in such case with low power region for the wireless mesh networks.

APA, Harvard, Vancouver, ISO, and other styles

25

Owczarek, Piotr, and Piotr Zwierzykowski. "Metrics in routing protocol for wireless mesh networks." Image Processing & Communications 18, no. 4 (December 1, 2013): 7–20. http://dx.doi.org/10.2478/v10248-012-0089-9.

Full text

Abstract:

Abstract The interest in services offered by wireless network has been growing for many years. It has encouraged the development of wireless technologies. New solutions are able to satisfy the ever-increasing demands concerning wireless services. It is also evident in the diversification of quality assessment methods employed with reference to connections used in such networks. One of the basic elements used in connection quality assessment are metrics. The use of metrics is directly linked to the type of the routing protocol applied in a given network. The selection of a given routing protocol is often determined by its specific properties that might be advantageous in a certain network type, or that are important in terms of the type or scope of services provided. Therefore, it is easy to identify a relationship between metrics and the area of application of a given routing protocol. The significance and diversity of metrics is also reflected inWireless Mesh Networks (WMNs). The proposed paper presents a review of the current state-of-the-art routing metrics for Ad-hoc and WMN networks

APA, Harvard, Vancouver, ISO, and other styles

26

Yan Gu, Han Han, Xujie Li, and Jie Guo. "Network Coding-Aware routing protocol in Wireless Mesh Networks." Tsinghua Science and Technology 20, no. 1 (February 2015): 40–49. http://dx.doi.org/10.1109/tst.2015.7040512.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Yu, Jinqiang, and Wai-Choong Wong. "A Network Resource Management Framework for Wireless Mesh Networks." Wireless Personal Communications 95, no. 3 (February 2, 2017): 3433–57. http://dx.doi.org/10.1007/s11277-017-4006-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Campos, Rui, Ricardo Duarte, Filipe Sousa, Manuel Ricardo, and José Ruela. "Network infrastructure extension using 802.1D-based wireless mesh networks." Wireless Communications and Mobile Computing 11, no. 1 (January 2011): 67–89. http://dx.doi.org/10.1002/wcm.916.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Gerk, Livia F., and Débora C. Muchaluat-Saade. "Voice Traffic Service Guarantee in Wireless Mesh Networks Based on IEEE 802.11e." International Journal of Business Data Communications and Networking 8, no. 4 (October 2012): 49–66. http://dx.doi.org/10.4018/jbdcn.2012100104.

Full text

Abstract:

The IEEE 802.11e standard is mostly concerned with traffic differentiation in single-hop infrastructured wireless networks. Wireless mesh networks use several wireless hops in order to forward packets to their destination. A significant issue is that the standard does not map network characteristics into the access protocol parameters it provides. This paper investigates different configurations of the IEEE 802.11e access parameters in wireless mesh networks and proposes two configuration settings. Both proposals provide voice traffic service guarantee without significantly degrading the performance of other multimedia traffic classes, as demonstrated by simulation experiment results.

APA, Harvard, Vancouver, ISO, and other styles

30

Wang, Jia Chen, and Min Cang Fu. "A Network Coding Based Rate Adaptive Protocol for Wireless Mesh Network." Applied Mechanics and Materials 135-136 (October 2011): 1140–46. http://dx.doi.org/10.4028/www.scientific.net/amm.135-136.1140.

Full text

Abstract:

In this paper, TRANC-a transmission rate adaption network coding protocol for wireless mesh network is proposed. We investigate the interaction between network coding and transmission rate adaption in wireless mesh network. Traditional network coding schemes either assume a fixed transmission rate and do not consider the impact of using diverse rates on the performance of the network, which limits the performance of the wireless networks. each node makes the routing decision based on the link quality, making full use of the transmission capacity of idle nodes in the network, which effectively reduces the communication costs between nodes, as well as the probability of packet duplication. Simulations show that TRANC can effectively improve network throughput with a lower end to end delay.

APA, Harvard, Vancouver, ISO, and other styles

31

Singh, Rajinder, and Er Nidhi Bhalla. "Path Mechanism to reduce packet data loss in Wireless Mesh Networks." INTERNATIONAL JOURNAL OF COMPUTERS & TECHNOLOGY 2, no. 3 (June 30, 2012): 134–41. http://dx.doi.org/10.24297/ijct.v2i3c.6779.

Full text

Abstract:

A wireless mesh network (WMN) is a communicationnetwork made up of radio nodes organized in a meshtopology. Wireless mesh network often consists of meshclients, mesh routers and gateways. A wireless Mesh networkuses multi-hop communication. Due to multi-hop architectureand wireless nature, Mesh networks are vulnerable to varioustypes of Denial of Services attack. It suffers from Packetdropping at Routing layer. Client nodes are unable to getservices from gateway nodes, hence network gets down. ThePaper emphasis on the developing of a path protocol when theminimun possible packet dropp occurs in wireless meshnetworks. Due to packet droping occurrences the networkperformance degrades. In the work, we have evaluated thePerformance of WMN under packet dropping on the basis oftheir throughput and Data packet loss.

APA, Harvard, Vancouver, ISO, and other styles

32

Sharma, Sharad, and Asha Malik. "Routing in Wireless Mesh Networks based on Termites' Intelligence." International Journal of Applied Metaheuristic Computing 8, no. 2 (April 2017): 1–21. http://dx.doi.org/10.4018/ijamc.2017040101.

Full text

Abstract:

Wireless Mesh Network (WMN) is envisaged to be key component of next generation wireless networks which can effectively cope with the ever increasing fast and vast growing need to access data and avail services over the network. These networks provide infrastructure less high speed internet access to the end users and have a cutting edge over the existing networks. Routing, being most critical issue in their implementation. The dynamic network conditions impose setbacks in the selection of optimal path. There is exigent requirement to tackle these routing issues in context of these networks. In this paper, the authors apply a nature inspired soft computing based meta heuristic technique called Termite Colony Optimization in WMN to find an optimal route based on the link cost. TCO approach is inspired by the emergent behaviour exhibited by the natural termite colony swarms for mound building. Experimentally TCO shows faster converges over some existing algorithms.

APA, Harvard, Vancouver, ISO, and other styles

33

Cass, S. "Viva mesh Vegas [mesh wireless network]." IEEE Spectrum 42, no. 1 (January 2005): 48–53. http://dx.doi.org/10.1109/mspec.2005.1377876.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Shen, Xiao Jian, and Zhi Gang Chen. "A Load-Balanced Coding-Aware Multicast Routing in Cognitive Wireless Mesh Networks." Applied Mechanics and Materials 740 (March 2015): 777–81. http://dx.doi.org/10.4028/www.scientific.net/amm.740.777.

Full text

Abstract:

Cognitive wireless mesh networks use network coding techniques can improve the transmission performance. Thus, a new load-balanced routing measure CRM-LB(Coding-aware Routing Metric with Load Balancing) based on network coding was presented, the CRM-LB increase of the considerations of traffic concentration level congestion level all nodes on the path P based on CRM(Coding-aware Routing Metric). Further proposed cognitive wireless mesh networks multicast routing CLR(Coding and Load-balancing Routing) based on the CRM-LB. The protocol can increase network coding opportunities, taking into account the network load balancing. The performance analysis and simulation results show that the protocol, under the premise of improving throughput, not only to better support network coding, and to achieve load balancing in network.

APA, Harvard, Vancouver, ISO, and other styles

35

Paszkiewicz, Andrzej, and Przemysław Zapała. "The modified metric for self-organization wireless MESH networks." ITM Web of Conferences 21 (2018): 00010. http://dx.doi.org/10.1051/itmconf/20182100010.

Full text

Abstract:

This paper concerns the modified metrics for MESH wireless networks. This metric is important when a specific data transmission path is being chosen. The parameters regarding the connection quality and overload are introduced in it. Therefore, the proposed metric takes a closer look at changing conditions of the wireless environment and contributes to a better self-organization functioning of this type of network. Its importance increases for networks characterized by the transmission of converged traffic. The paper also presents the results of a simulation showing the dependence of metric values on transmission parameters for selected wireless transmission technologies.

APA, Harvard, Vancouver, ISO, and other styles

36

MA, LIANG, and MIESO K. DENKO. "ENHANCED ROUTING METRIC FOR LOAD-BALANCING IN WIRELESS MESH NETWORKS." Journal of Interconnection Networks 08, no. 04 (December 2007): 407–26. http://dx.doi.org/10.1142/s0219265907002107.

Full text

Abstract:

Wireless mesh networks (WMNs) have been drawing significant attention in recent years due to their flexibility in providing extensive wireless backbone. WMNs typically consist of mesh routers and mesh clients with each node operating not only as a host but also as a router. Due to the traffic patterns in WMNs, load-balancing becomes an important issue and may degrade the performance of the entire network. This paper proposes a routing metric known as Weighted Cumulative Expected Transmission Time with Load-Balancing (WCETT-LB) for wireless mesh networks. WCETTT-LB enhances the basic Weighted Cumulative Expected Transmission Time (WCETT) by incorporating load-balancing into the routing metric. Unlike existing schemes, WCETT-LB implements load-balancing at mesh routers. WCETT-LB provides a congestion-aware routing and traffic splitting mechanism to achieve global load-balancing in the network. By conducting an extensive simulation experiments, the result shows that WCETT-LB outperforms the existing routing metrics in load-balancing in terms of achieving high packet delivery ratio, low average end-to-end delay and low average congestion level in wireless mesh networks. The qualitative and quantitative analysis also show the significance of the proposed scheme.

APA, Harvard, Vancouver, ISO, and other styles

37

Mathad, K., and M. Math. "Inference and performance aware multi-channel scheduling and routing scheme with call admission control in wireless mesh networks." International Journal on Information Technologies and Security 15, no. 1 (March 1, 2023): 15–26. http://dx.doi.org/10.59035/xuys3831.

Full text

Abstract:

As wireless mesh networks have been deployed in the urban area, dynamic channel allocation is more challengeable because co-located wireless mediums are likely to be tuned to the same channels and may interfere with communication. Further, existing model doesn’t consider reutilizing routing resource. This paper presents an efficient scheduling and routing model considering an external interference and routing resource reutilization for multi-channel wireless mesh networks. Each mesh node uses a novel technique to estimate the usage status of all the channels within its interference range and assigns channels dynamically to radios to minimize interference within the mesh network and between the mesh network and collocated wireless networks. Simulation results demonstrate that our proposed algorithm can improve the network throughput, reduce packet failure rate and consume more energy while transmission substantially compared to other algorithms by removing the interference overestimation problem and assigning channels aggressively with priority.

APA, Harvard, Vancouver, ISO, and other styles

38

Hassan, Walaa, and Tamer Farag. "Adaptive Allocation Algorithm for Multi-Radio Multi-Channel Wireless Mesh Networks." Future Internet 12, no. 8 (July 29, 2020): 127. http://dx.doi.org/10.3390/fi12080127.

Full text

Abstract:

The wireless mesh network (WMN) has proven to be a great choice for network communication technology. WMNs are composed of access points (APs) that are installed and communicate with each other through multi-hop wireless networks. One or more of these APs acts as a gateway (GW) to the internet. Hosts of WMNs are stationary or mobile. According to the structure of WMNs, some network features may be affected, such as the overall performance, channel interference, and AP connectivity. In this paper, we propose a new adaptive channel allocation algorithm for a multi-radio multi-channel wireless mesh network. The algorithm is aimed to minimize the number of channel reassignments while maximizing the performance under practical constraints. The algorithm defines a decision function for the channel reassignments. The decision function aims to minimize the traffic around the GW. Whenever the traffic changes in the wireless mesh network, the decision function decides which channel radio reassignment should be done. We demonstrated the effectiveness of our algorithm through extensive simulations using Network Simulator 2 (NS-2).

APA, Harvard, Vancouver, ISO, and other styles

39

Ar-Reyouchi, El Miloud, Yousra Lamrani, Imane Benchaib, Kamal Ghoumid, and Salma Rattal. "The Total Network Capacity of Wireless Mesh Networks for IoT Applications." International Journal of Interactive Mobile Technologies (iJIM) 14, no. 08 (May 20, 2020): 61. http://dx.doi.org/10.3991/ijim.v14i08.12697.

Full text

Abstract:

<p class="0abstract">Computing and measuring the total capacity of a data network are a remarkably difficult problem. These metrics are directly linked to the available bandwidth to each wireless internet of things (IoT) device of the network. In this paper, the authors study the performance metrics associated with capacity traffic in multi-hop wireless mesh networks (WMNs). It is dedicated to Internet access assuming a time division multiple access (TDMA). They focus simultaneously on three key operating metrics, the total network capacity (TNC), total application network capacity (TANC), and the Average message time (AMS). They also analyze how parameters such as forward error correction (FEC) and acknowledgments (ACK) affect the overall network capacity under different operating conditions. Theoretical network capacity for WMNs, in this paper, is explored to draw attention to the number of open research issues</p>

APA, Harvard, Vancouver, ISO, and other styles

40

Santos, Luís, Tiago Costa, João M. L. P. Caldeira, and Vasco N. G. J. Soares. "Performance Assessment of ESP8266 Wireless Mesh Networks." Information 13, no. 5 (April 20, 2022): 210. http://dx.doi.org/10.3390/info13050210.

Full text

Abstract:

This paper presents a wireless mesh network testbed based on ESP8266 devices using painlessMesh library. It evaluates its feasibility and potential effectiveness as a solution to monitor perishable goods, such as fresh fruit and vegetables, which are often stored and transported inside refrigerated containers. Performance testing experiments with different numbers of nodes and traffic loads and different message payload sizes are conducted under unicast transmission. The impact on network performance is evaluated in terms of delivery ratio and delivery delay, which, consequently, affect the energy consumption and, hence, network lifetime. The results of this investigation are an important contribution to help researchers to propose mechanisms, schemes, and protocols to improve performance in such challenging networks.

APA, Harvard, Vancouver, ISO, and other styles

41

Oostvogels, Jonathan, Fan Yang, Sam Michiels, and Danny Hughes. "Symbol-Synchronous Buses: Deterministic, Low-Latency Wireless Mesh Networking with LEDs." Communications of the ACM 66, no. 4 (March 23, 2023): 93–101. http://dx.doi.org/10.1145/3583762.

Full text

Abstract:

Latency-sensitive applications for the Internet of Things often require performance guarantees that contemporary wireless networks fail to offer. The cause of this shortcoming lies in the inherent complexity and inefficiency of networking abstractions such as routing, medium access control, and store-and-forward packet switching, which coordinate multiple nodes across a wireless network. This research highlight describes a novel networking paradigm that aims to enable a new class of latency-sensitive applications by systematically breaking these abstractions. The paradigm, referred to as a symbol-synchronous bus, has nodes that concurrently transmit optical signals and thus delivers a wireless mesh network with a performance envelope resembling that of a wired bus in terms of deterministic latency and throughput. A physical prototype, called ZERO-WIRE, confirms that symbol-synchronous buses unlock a novel end-to-end performance envelope for wireless mesh networks: our 25-node test bed achieves 19kbps of contention-agnostic goodput, latency under 1 ms for two-byte frames across four hops, jitter on the order of 10μs of (is, and a base reliability of 99%. These early results suggest a bright future for the under-explored area of optical wireless mesh networks in delivering ubiquitous connectivity through a low-complexity physical layer.

APA, Harvard, Vancouver, ISO, and other styles

42

Hasegawa, Go, Toshiaki Hidekuma, Masahiro Sasabe, and Hirotaka Nakano. "Power Control Methods for Improving Spatial Reuse in TDMA-Based Wireless Mesh Networks." ISRN Communications and Networking 2011 (August 15, 2011): 1–12. http://dx.doi.org/10.5402/2011/970943.

Full text

Abstract:

Wireless Mesh Networks (WMNs) have attracted a great deal of interest in recent years as a cost-effective method to provide a wireless network infrastructure. To accommodate various types of application traffic in WMNs, improvement of network capacity is one of the most critical issues. The efficiency of wireless network resource utilization decreases due to radio interference when multiple transmissions occur simultaneously in an interference region. To resolve this problem, we focus on the transmission power control of mesh nodes. We expect to improve spatial reuse by applying power control because this decreases radio interference between wireless links. In this paper, we propose power control methods of mesh nodes for improving spatial reuse in TDMA-based wireless mesh networks. We first propose two types of power control methods, which employ a simple threshold-based mechanism. Furthermore, we develop an additional method that suppresses the unnecessary increase in path length associated with limiting the increase in the hop count to the nearby mesh nodes. Numerical evaluation results reveal that the proposed method decreases the frame length by up to 27% with non sensitive parameter setting.

APA, Harvard, Vancouver, ISO, and other styles

43

Yafei HU, Fangmin LI, and Xinhua LIU. "On Network Coding for Qos Improvement in Wireless Mesh Networks." INTERNATIONAL JOURNAL ON Advances in Information Sciences and Service Sciences 4, no. 17 (September 30, 2012): 100–113. http://dx.doi.org/10.4156/aiss.vol4.issue17.11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Grobler, M. J., and A. S. J. Helberg. "Identifying Opportunities for Deterministic Network Coding in Wireless Mesh Networks." SAIEE Africa Research Journal 102, no. 1 (March 2011): 8–15. http://dx.doi.org/10.23919/saiee.2011.8531563.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Xiong, Ke, Pingyi Fan, Su Yi, Ming Lei, and Zhangdui Zhong. "Cooperative opportunistic network-coded transmission strategy for wireless mesh networks." International Journal of Ad Hoc and Ubiquitous Computing 20, no. 2 (2015): 78. http://dx.doi.org/10.1504/ijahuc.2015.071693.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Lv, Pin, Zhiping Cai, Jia Xu, and Ming Xu. "Multicast Service-Oriented Virtual Network Embedding in Wireless Mesh Networks." IEEE Communications Letters 16, no. 3 (March 2012): 375–77. http://dx.doi.org/10.1109/lcomm.2012.012412.112364.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Khatri, Chintan B., and Karan B. Maniar. "Wireless Mesh Networks: Network Architecture, Routing Protocols and Research Challenges." International Journal of Computer & Organization Trends 13, no. 1 (October 25, 2014): 7–9. http://dx.doi.org/10.14445/22492593/ijcot-v13p302.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Huang, Feiyi, Yang Yang, and Liwen He. "A flow-based network monitoring framework for wireless mesh networks." IEEE Wireless Communications 14, no. 5 (October 2007): 48–55. http://dx.doi.org/10.1109/mwc.2007.4396942.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Li, J. S., K. H. Liu, N. Chilamkurti, T. Q. Duong, and L. Shu. "Scheduling performance enhancement by network coding in wireless mesh networks." IET Communications 6, no. 13 (September 5, 2012): 1912–19. http://dx.doi.org/10.1049/iet-com.2011.0445.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Chen, Tingting, Ankur Bansal, and Sheng Zhong. "A reputation system for wireless mesh networks using network coding." Journal of Network and Computer Applications 34, no. 2 (March 2011): 535–41. http://dx.doi.org/10.1016/j.jnca.2010.12.016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'WIRELESS MESS NETWORK'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles