Academic literature on the topic 'Whiteschist assemblages'

AbstractMetamorphic rocks of undoubted crustal origin have been described in recent years, principally from Mediterranean collision zones that have been subjected to PT conditions along very low geothermal gradients (∼ 7°C/km) and have reached pressures up to 30 kbar. MgAl-rich metapelites develop particularly diagnostic high-pressure minerals and mineral assemblages that have been and are being studied experimentally in model systems involving the components K2O, MgO, Al2O3, TiO2, SiO2, P2O5, and H2O up to pressures of 50 kbar and temperatures of 1000°C.In the present review the following synthetic phases and phase assemblages are discussed, emphasizing their water-pressure-temperature stability fields (approximated in parentheses here), their reaction relationships, and their known or potential occurrences in metamorphic rocks. Sudoite (0 to ∼ 12 kbar, 150? to 380°C) occurs in very low-grade metapelites. Mg-carpholite (∼ 7 to ∼ 45 kbar, ∼ 200 to 600°C) is found in subducted metabauxites, metapelites, and related quartz veins. Mg-chloritoid (18 to 45 kbar?; 400 to 760°C) has not been found in nature as pure or nearly pure end-member; it requires silica-deficient environments. Yoderite, known in nature only from a single talc-kyanite schist occurrence, has only a small stability field (9 to 18 kbar?, 700 to 870°C?), cannot coexist with quartz, but may be stabilized by Fe3+. Pyrope (∼ 15 to at least 50 kbar, ∼ 700°C to melting), with or without relic coesite inclusions, occurs spectacularly in quartzites. Mg-staurolite (∼ 14 to some 90 kbar?, 700 to 1000°C), recently discovered as inclusions in pyrope, requires silica-deficiency. MgMgAl-pumpellyite is a new synthetic phase in which Mg totally replaces Ca of normal pumpellyite; because of its very high-pressure, low-temperature stability (∼ 37 to at least 55 kbar, < 400 to 780°C) it may not form within our globe. Ellenbergerite, the new high-pressure mineral forming inclusions in pyrope, apparently exhibits a rather composition-dependent stability with Ti-ellenbergerite, requiring higher pressures (> 20 kbar) than P-bearing, Ti-free members; a pure hydrous Mg-phosphate with ellenbergerite structure was synthesized at 10 kbar. Phengites, the widespread MgSi-substituted muscovites, require increasingly high water pressures (up to ∼ 20 kbar) for higher degrees of substitution, but the Al-celadonite end-member is not stable under any conditions; the compositions of phengites coexisting with limiting assemblages such as phlogopite, K-feldspar, and an SiO2 phase are useful geobarometers. The common assemblage Mg-chlorite + Al2SiO5 (mainly kyanite) has an extensive stability field ranging from near zero to 31 kbar at temperatures varying from some 320 to ∼ 760°C depending on pressure. The whiteschist assemblage talc + kyanite (6 to ∼ 45 kbar, 550 to 810°C) plays an important role in collision zone metamorphism as it forms from the greenschist assemblage chlorite + quartz at low grades but is also known to break down into pyrope + coesite at the highest grade observed thus far. The assemblage talc-phengite (11 to at least 35 kbar, 300? to 820°C depending on pressure), on the other hand, is well known from subducted metapelites. At pressures of 15–20 kbar and temperatures of 400–650°C a very K,Mg-rich, siliceous fluid forms as a consequence of the mutual reaction of the minerals K-feldspar and phlogopite (biotite) which are very common in crustal rocks including granites. Such fluids are bound to cause metasomatism in neighbouring mantle rocks which, upon subsequent increase of temperature, produce post-collisional ultrapotassic, lamproitic melts.

AbstractThe Monte Rosa nappe consists of a wide range of lithologies that record conditions associated with peak Alpine metamorphism. While peak temperature conditions inferred from previous studies largely agree, variable peak pressures have been estimated for the Alpine high-pressure metamorphic event. Small volumes of whiteschist lithologies with the assemblage chloritoid + phengite + talc + quartz record peak pressures up to 0.6 GPa higher compared to associated metapelitic and metagranitic lithologies, which yield a peak pressure of ca. 1.6 GPa. The reason for this pressure difference is disputed, and proposed explanations include tectonic mixing of rocks from different burial depths (mélange) or local deviations of the pressure from the lithostatic value caused by heterogeneous stress conditions between rocks of contrasting mechanical properties. We present results of detailed field mapping, structural analysis and a new geological map for a part of the Monte Rosa nappe exposed at the cirque du Véraz field area (head of the Ayas valley, Italy). Results of the geological mapping and structural analysis shows the structural coherency within the western portions of the Monte Rosa nappe. This structural coherency falsifies the hypothesis of a tectonic mélange as reason for peak pressure variations. Structural analysis indicates two major Alpine deformation events, in agreement with earlier studies: (1) north-directed nappe emplacement, and (2) south-directed backfolding. We also analyze a newly discovered whiteschist body, which is located at the intrusive contact between Monte Rosa metagranite and surrounding metapelites. This location is different to previous whiteschist occurrences, which were entirely embedded within metagranite. Thermodynamic calculations using metamorphic assemblage diagrams resulted in 2.1 ± 0.2 GPa and 560 ± 20 °C for peak Alpine metamorphic conditions. These results agree with metamorphic conditions inferred for previously investigated nearby whiteschist outcrops embedded in metagranite. The new results, hence, confirm the peak pressure differences between whiteschists and the metagranite and metapelite. To better constrain the prograde pressure–temperature history of the whiteschist, we compare measured Mg zoning in chloritoid with Mg zoning predicted by fractional crystallization pseudo-section modelling for several hypothetical pressure–temperature paths. In order to reach a ca. 0.6 GPa higher peak pressure compared to the metapelite and metagranite, our results suggest that the whiteschist likely deviated from the prograde burial path recorded in metapelite and metagranite lithologies. However, the exact conditions at which the whiteschist pressure deviated are still contentious due to the strong temperature dependency of Mg partitioning in whiteschist assemblages. Our pseudo-section results suggest at least that there was no dramatic isothermal pressure increase recorded in the whiteschist.

AbstractWhiteschists from the Monte Rosa Nappe were examined in the field as well as with petrographic, geochemical, and isotopic methods to constrain the controversial origin of these rocks in their Alpine metamorphic context. Whiteschists occur as ellipsoidal-shaped, decametric-sized bodies, within a Permian metagranite, and consist mainly of chloritoid, talc, phengite, and quartz. The transition from whiteschist to metagranite is marked by multiple sharp mineralogical boundaries defining concentric zones unrelated to Alpine deformation. The development of reaction zones, as well as the geometry of the whiteschist suggest a pervasive fluid infiltration, facilitated and canalized by reaction fingering. Whole-rock compositions of whiteschists and metagranites indicate an enrichment in MgO and H2O and depletion of Na2O, CaO, Ba, Sr, Pb, and Zn in the whiteschist relative to the metagranite. Trace- and rare-earth elements, together with all other major elements, notably K2O and SiO2, were within uncertainty not mobile. Such a K and Si saturated, Na undersaturated fluid is not compatible with previous interpretations of fluids derived from ultramafic rocks, evaporites, or Mg-enriched seawater due to mantle interactions. Together with the large variations in δD and δ18O values, this indicates large fluid fluxes during metasomatism. Calculated δD and δ18O values of fluids in equilibrium with the whiteschist support a magmatic–hydrothermal fluid source, as does the chemical alteration pattern. Bulk rock 87Sr/86Sr ratios in whiteschists confirm a pre-Alpine age of fluid infiltration. The 87Sr/86Sr ratios in whiteschists were subsequently partially homogenized in a closed system during Alpine metamorphism. In conclusion, the granite was locally affected by late magmatic–hydrothermal alteration, which resulted in sericite–chlorite alteration zones in the granite. The entire nappe underwent high-pressure metamorphism during the Alpine orogeny and the mineralogy of the whiteschist was produced during dehydration of the metasomatic assemblage under otherwise closed-system metamorphism. While each whiteschist locality needs to be studied in detail, this in-depth study suggests that many whiteschists found in granitic bodies in the Alps might be of similar origin.

This item is only available electronically.
The Winnecke Gorge-Two Mile Bore region (Winnecke Domain) of the Arunta Block, central Australia, contains a highly condensed geological section from greenschist-facies Amadeus Basin cover sequences (Heavitree Quartzite and Bitter Springs Formation), through amphibolite-grade assemblages (Ankala gneiss), to granulite-facies mafic, felsic and calc-silicate lithologies (Strangways Metamorphic Complex). Juxtaposition of these blocks of widely varying metamorphic grade has been facilitated via the activation (and probable reactivation in many cases) of several major sub-parallel, E-W trending shear zones. Greenschist-facies shear zones to the immediate north of the Heavitree Quartzite have previously been demonstrated to have been associated with the Palaeozoic Alice Springs Orogeny. In this study, the petrological character of assemblages from across the Winnecke Domain have been investigated. Thermobarometric estimates (using THERMOCALC and other pressure-temperature estimators) have been used to constrain the change in pressure-temperature conditions across the Winnecke Domain. Pressures obtained from gneissic assemblages increase from around 4.0 kbars in the Winnecke South gneiss (the southern extent of the transect) to around 8.5 kbars in the Cadney metamorphics (the northern extent), and step significantly at major lithological boundaries (i.e. Erontonga metamorphics - Two Mile Bore shear zone contact). The range of pressures obtained from schistose assemblages is quite variable (between 3.3 and 6.8 kbars), and does not increase consistently towards the north. This possibly indicates several phases of activation of shear zones in the region, or it may reflect the presence of variable, but significant, amounts of non-KFMASH components (e.g. Mn) in phases such as garnet. Significant, but variable, potassium and iron metasomatism was typically associated with the development of schists throughout the Winnecke Domain, and was often accompanied by coarse grained biotite, muscovite and magnetite growth. The source of such large quantities of potassium in the potassium-poor granulite terrain is unknown at present. A significant occurrence of a whiteschist (kyanite/talc-bearing) assemblage, the first of its type documented from mainland Australia, is described from the southern margin of the Erontonga metamorphics. The first reported occurrence of a kyanite-bearing schist from the Cadney metamorphics (in the Marbles Bore region) is documented in this study.
Thesis (B.Sc.(Hons)) -- University of Adelaide, School of Earth and Environmental Sciences, 1996