Journal articles: 'Wet processes'

1

Gαsiorowski, H. "Wheat wet fractionation processes." Food / Nahrung 29, no. 9 (1985): 879–84. http://dx.doi.org/10.1002/food.19850290913.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Cavusoglu, Hayrunnisa, and Mustafa Sahin Gulaboglu. "Wet flue gas desulfurization processes." Pamukkale University Journal of Engineering Sciences 19, no. 4 (2013): 187–94. http://dx.doi.org/10.5505/pajes.2013.66376.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Tardif, F., J. Palleau, T. Lardin, O. Demolliens, A. Vincent, and J. Torres. "Wet cleanings adapted to backend processes." Microelectronic Engineering 33, no. 1-4 (January 1997): 195–201. http://dx.doi.org/10.1016/s0167-9317(96)00045-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

SUGIMURA, Hiroyuki, and Osamu TAKAI. "New Developments in Chemical Wet Processes. Microfabrication Based on Self-assembled Monolayer Resists and Wet-chemical Processes." Hyomen Kagaku 22, no. 6 (2001): 364–69. http://dx.doi.org/10.1380/jsssj.22.364.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lyngfelt, A., and P. Stenberg. "Wet Peat Power Processes: A Thermodynamic Study." Journal of Engineering for Gas Turbines and Power 110, no. 2 (April 1, 1988): 155–60. http://dx.doi.org/10.1115/1.3240094.

Full text

Abstract:

The efficiencies of four power processes for wet peat have been studied. These include gas turbine cycles, steam power cycles, and combinations thereof. It is concluded that wet peat can be used in power processes with reasonable efficiency. The paper suggests that wet peat power processes could be cost competitive relative to conventional power production.

APA, Harvard, Vancouver, ISO, and other styles

6

Pipia, Francesco, Annamaria Votta, Alice C. Elbaz, Salvo Grasso, Enrica Ravizza, Simona Spadoni, and Mauro Alessandri. "Cu Surface Characterization after Wet Cleaning Processes." Solid State Phenomena 145-146 (January 2009): 371–75. http://dx.doi.org/10.4028/www.scientific.net/ssp.145-146.371.

Full text

Abstract:

In damascene architecture, widely used both in flash memories and in DRAM as interconnect scheme since 90 nm node, copper surface is exposed after via etch. A deep understanding of the effect of different wet cleanings on Cu surface is therefore mandatory, not only to ensure an efficient post etch polymer removal, but also to provide a better surface termination, capable to minimize Cu oxidation kinetic and to reduce the growth of Cu-rich precipitates which may negatively effect contact resistance. In this work we have analyzed the Cu surface after processing with several cleaning chemistries -often present in BEOL cleaning processes- using XPS (X-ray Photoelectron Spectroscopy) and ToF-SIMS (Time of Flight – Secondary Ion Mass Spectroscopy), fast and powerful techniques widely used in Cu surface characterization [1]. In addition, the evolution of the surface with storage time has been monitored using the same techniques, in order to better understand the effect of the different cleaning chemistries. XPS has been proven to be very sensitive to monitor Cu oxidation, while ToF-SIMS has been used to reveal organic species adsorbed on the surface.

APA, Harvard, Vancouver, ISO, and other styles

7

TSUNEKAWA, Masami, Kunihiro HORI, Naoki HIROYOSHI, and Mayumi ITO. "Technological Developments in Wet Gravity Separation Processes." Shigen-to-Sozai 121, no. 10/11 (2005): 467–73. http://dx.doi.org/10.2473/shigentosozai.121.467.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Saurbier, K., J. W. Schultze, and J. Geke. "Inhibition of Corrosive Processes in Wet Atmosphere." Materials Science Forum 111-112 (January 1992): 73–84. http://dx.doi.org/10.4028/www.scientific.net/msf.111-112.73.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lam, Y. L., C. W. Kan, and C. W. M. Yuen. "Application of Catalyst in Textile Wet Processes." Research Journal of Textile and Apparel 16, no. 1 (February 2012): 10–23. http://dx.doi.org/10.1108/rjta-16-01-2012-b002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Levec, Janez, and Albin Pintar. "Catalytic wet-air oxidation processes: A review." Catalysis Today 124, no. 3-4 (June 2007): 172–84. http://dx.doi.org/10.1016/j.cattod.2007.03.035.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

KOURA, Nobuyuki, and Hideyuki NEGISHI. "Preparation of Superconducting Oxide Films by Wet Processes." Journal of the Surface Finishing Society of Japan 45, no. 12 (1994): 1179–83. http://dx.doi.org/10.4139/sfj.45.1179.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

IWASAKI, Mitsunobu, and Wonkyu PARK. "Preparation of Inorganic Fine Particles through Wet Processes." Shikizai Kyokaishi 81, no. 1 (2008): 17–22. http://dx.doi.org/10.4011/shikizai.81.17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Van der Sluis, Sietse, Annie H. M. Schrijver, Frits P. C. Baak, and Gerda M. Van Rosmalen. "Fluoride distribution coefficients in wet phosphoric acid processes." Industrial & Engineering Chemistry Research 27, no. 3 (March 1988): 527–36. http://dx.doi.org/10.1021/ie00075a026.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Litster, J. D. "Scaleup of wet granulation processes: science not art." Powder Technology 130, no. 1-3 (February 2003): 35–40. http://dx.doi.org/10.1016/s0032-5910(02)00222-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Pastre, Aymeric, Odile Cristini, Alexandre Boe, Katarzyna Raulin, Bertrand Grimbert, Fernand Chassagneux, Nathalie Rolland, and Remy Bernard. "Porous Gold Films Fabricated by Wet-Chemistry Processes." Journal of Nanomaterials 2016 (2016): 1–9. http://dx.doi.org/10.1155/2016/3536153.

Full text

Abstract:

Porous gold films presented in this paper are formed by combining gold electroless deposition and polystyrene beads templating methods. This original approach allows the formation of conductive films (2 × 106 (Ω·cm)−1) with tailored and interconnected porosity. The porous gold film was deposited up to 1.2 μm on the silicon substrate without delamination. An original zirconia gel matrix containing gold nanoparticles deposited on the substrate acts both as an adhesion layer through the creation of covalent bonds and as a seed layer for the metallic gold film growth. Dip-coating parameters and gold electroless deposition kinetics have been optimized in order to create a three-dimensional network of 20 nm wide pores separated by 20 nm thick continuous gold layers. The resulting porous gold films were characterized by GIXRD, SEM, krypton adsorption-desorption, and 4-point probes method. The process is adaptable to different pore sizes and based on wet-chemistry. Consequently, the porous gold films presented in this paper can be used in a wide range of applications such as sensing, catalysis, optics, or electronics.

APA, Harvard, Vancouver, ISO, and other styles

16

Kaczmarek, W. A., and S. J. Campbell. "Transformations in Oxides- Dry and Wet Mechanochemical Processes." Materials Science Forum 269-272 (January 1998): 259–64. http://dx.doi.org/10.4028/www.scientific.net/msf.269-272.259.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Lee, I. Y., and J. D. Shannon. "Indications of nonlinearities in processes of wet deposition." Atmospheric Environment (1967) 19, no. 1 (January 1985): 143–49. http://dx.doi.org/10.1016/0004-6981(85)90145-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Liu, L. X., J. D. Litster, S. M. Iveson, and B. J. Ennis. "Coalescence of deformable granules in wet granulation processes." AIChE Journal 46, no. 3 (March 2000): 529–39. http://dx.doi.org/10.1002/aic.690460312.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Izumi, Kaoru, and Eizi Akitaya. "Hardness of Wet Snow." Annals of Glaciology 6 (1985): 267–68. http://dx.doi.org/10.3189/1985aog6-1-267-268.

Full text

Abstract:

Dependence of Kinosita’s hardness R of wet snow on its dry density ρd and free water content W was obtained in the following form where a, b and c are constants. When wet snow was qualitatively classified into two types, I (coarse-grained granular) and II (new and fine-grained compact) and the constants were determined separately for each type, the correlation coefficients of the above relation were high except between In R and W for snow I. For further investigation of the effect of W on R, a dry snow sample was prepared and R was measured before and after water addition. Aging effect on R was also investigated.

APA, Harvard, Vancouver, ISO, and other styles

20

Soto, B., E. Benito, and F. Diaz-Fierros. "Heat-Induced Degradation Processes in Forest Soils." International Journal of Wildland Fire 1, no. 3 (1991): 147. http://dx.doi.org/10.1071/wf9910147.

Full text

Abstract:

Degradation by heating was studied in samples from the top 5 cm of six woolandHumic Cambisols under Ulex and Pinus pinaster stands in N.W. Spain. After heating to various temperatures, the samples were exposed for 30 minutes to simulated rain with an energy of 24.16 joul m-2 mm-1. Three kinds of degradation were observed: 1) loss of organic matter and water by volatilization ; 2) dry breakdown ; and 3) wet breakdown. The observed degradation processes correlated well with the differential thermal analysis data. Below 170°C, volatilization losses appeared, but there was no dry breakdown and resistance to wet breakdown increased slightly; between 170°C and 380–460°C, all three kinds of degradation increased greatly; and above 460°C, no further volatilization, non dry breakdown ocurred, and wet breakdown tended to decrease.

APA, Harvard, Vancouver, ISO, and other styles

21

Fyfe, W. S. "Granites and a wet convecting ultramafic planenet." Earth and Environmental Science Transactions of the Royal Society of Edinburgh 79, no. 2-3 (1988): 339–46. http://dx.doi.org/10.1017/s0263593300014310.

Full text

Abstract:

ABSTRACTGranites and their associated extrusive rocks are formed in large volumes whenever the continental crust is heated by rising hot mantle, or thickened by collision processes. The complexity of rocks of the granite family is related to the complexity of the continental crust itself and the complexity of processes which lead to thermal perturbations. The light continental crust acts as a density filter which screens out heavy mantle magmas and leads to complex underplating and magma mixing processes. Perhaps the primary cause of crustal melting is the deep recycling of volatiles which are fixed in the oceanic crust before subduction. Modern studies of subduction and collision processes show the large scale and complexity of processes which modify old continental crust.

APA, Harvard, Vancouver, ISO, and other styles

22

Kashkoush, I., G. Chen, D. Nemeth, and J. Rieker. "Optimized Wet Processes and PECVD for High-Efficiency Solar Cells." Solid State Phenomena 195 (December 2012): 297–300. http://dx.doi.org/10.4028/www.scientific.net/ssp.195.297.

Full text

Abstract:

The semiconductor industry considers wet cleans to be critical surface preparation steps. The Si/SiO2 interface, for example, is very critical to achieve high gate oxide integrity and avoid leakage or stacking faults. Similarly, the solar industry has seen the value of wet processes to achieve best cell performance. In this study, we highlight the effect of pre-cleans, texturization and final cleans on cell parameters. We also studied the importance of coupling these wet cleaning and texturization steps with the PECVD steps to achieve the film quality required for highest solar cell efficiency.

APA, Harvard, Vancouver, ISO, and other styles

23

Chen, Ching-Lung, Chien-Chang Huang, Kao-Chia Ho, Ping-Xuan Hsiao, Meng-Shan Wu, and Jo-Shu Chang. "Biodiesel production from wet microalgae feedstock using sequential wet extraction/transesterification and direct transesterification processes." Bioresource Technology 194 (October 2015): 179–86. http://dx.doi.org/10.1016/j.biortech.2015.07.021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Shpenzer, G. G., and A. V. Zakharov. "Flow separation and nonstationary processes in LP wet stages." St. Petersburg State Polytechnical University Journal 219, no. 2 (June 2015): 16–24. http://dx.doi.org/10.5862/jest.219.2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Gretscher, Harald, and Karlheinz Schaber. "Aerosol formation by heterogeneous nucleation in wet scrubbing processes." Chemical Engineering and Processing: Process Intensification 38, no. 4-6 (September 1999): 541–48. http://dx.doi.org/10.1016/s0255-2701(99)00051-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

MAJUMDER, T., D. MEISNER, and C. SCHICK. "Dielectric processes of wet and well-dried wheat starch." Carbohydrate Polymers 56, no. 3 (July 8, 2004): 361–66. http://dx.doi.org/10.1016/j.carbpol.2004.03.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Mouche, L., F. Tardif, and J. Derrien. "Particle Deposition on Silicon Wafers during Wet Cleaning Processes." Journal of The Electrochemical Society 141, no. 6 (June 1, 1994): 1684–91. http://dx.doi.org/10.1149/1.2054983.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Haneef, S. J., J. B. Johnson, G. E. Thompson, and G. C. Wood. "The degradation of coupled stones by wet deposition processes." Corrosion Science 34, no. 3 (March 1993): 497–510. http://dx.doi.org/10.1016/0010-938x(93)90119-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Luck, F. "A review of industrial catalytic wet air oxidation processes." Catalysis Today 27, no. 1-2 (January 1996): 195–202. http://dx.doi.org/10.1016/0920-5861(95)00187-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Fujio, Shin’ichiro. "Early Grain Cultivation and Starting Processes in the Japanese Archipelago." Quaternary 4, no. 1 (January 27, 2021): 3. http://dx.doi.org/10.3390/quat4010003.

Full text

Abstract:

This paper presents a specific examination of the introduction of grain cultivation and the processes of development in the Japanese Archipelago. In fact, no definitive archaeological evidence has been found that Jomon hunter–gatherers cultivated grain in the Japanese Archipelago; the earliest potential evidence of grain is a stamp mark of rice on the surface of a final late-Jomon, in about 11th century BC, pottery found at the Itaya 3 site in Shimane Prefecture. Current evidence indicates that the first grain cultivation was started by Jomon people who adopted irrigated wet rice cultivation that had arrived from the Korean Peninsula to northern parts of Kyushu, and gradually spread eastward thereafter. This study specifically examines four regions, including northern Kyushu, Kinki, southern Kanto, and northern Tohoku, in order to investigate the processes of grain cultivation initiation and spread. First, the years during which wet rice cultivation started in each region are estimated based on carbon-14 dating of earthenware types used during that period. Secondly, the timing of the spread of wet rice cultivation has been estimated based on carbon-14 dating of earthenware. Subsequently, differences in the periods between the initiation and dissemination of wet rice cultivation were estimated. Results suggest that dissemination took place over approximately 250 years in northern Kyushu, where wet rice cultivation first started. The time required for adoption decreased gradually as the trend moved eastward. It was estimated to have taken approximately 150 years in Kinki and 20–30 years in southern Kanto, taking place at about the same time. A factor, significantly contributing to such differences in timing and development processes among regions, was likely the relationship between the first farmers who introduced wet rice farming and the indigenous hunter–gatherers who lived there.

APA, Harvard, Vancouver, ISO, and other styles

31

Amir, Nizar, Makhfud Efendy, Rachmad Hidayat, and Misri Gozan. "The Effects of Dry and Wet Grinding Processes on The Salt Quality." E3S Web of Conferences 328 (2021): 07011. http://dx.doi.org/10.1051/e3sconf/202132807011.

Full text

Abstract:

Studies were conducted on the salt quality, such as NaCl percent and whiteness achieved by dry and wet grinding methods. Crude solar salt is carefully collected from traditional solar salt ponds to ensure the uniformity of the sample. Several salt processing methods were applied in this research, such as washing, grinding, and dewatering by centrifuge hydro extractor and drying. The effect of reducing salt particle size to 0.6 and 0.25 mm was also studied. The dry grinding method is conducted before the washing stage, while the wet grinding method is applied after the washing stage. Both dry and wet grinding methods provide high-quality salt products, indicating high NaCl percent and whiteness. The dry grinding method produces higher NaCl percent and whiteness than the wet grinding method. However, the wet grinding method was better in water management and equipment durability with loss of salt losses during the washing stage. Finally, both grinding methods have advantages and disadvantages, so for developing the salt processing industry, both methods should be correctly chosen and match product output requirements.

APA, Harvard, Vancouver, ISO, and other styles

32

Velásquez, Sofía, Carlos Banchón, Willian Chilán, and José Guerrero-Casado. "Effect of Three Post-Harvest Methods at Different Altitudes on the Organoleptic Quality of C. canephora Coffee." Beverages 8, no. 4 (December 13, 2022): 83. http://dx.doi.org/10.3390/beverages8040083.

Full text

Abstract:

C. canephora (syn. C. robusta) is distinctive due to its rising industrial value and pathogen resistance. Both altitude and post-harvest methods influence coffee cup quality; however, modest information is known about this coffee species. Therefore, the aim of this study was to determine the relationship between four different altitudes and post-harvest processes (dry, honey, and wet) to the improvement of the organoleptic quality of the C. canephora congolensis and conilon drink. For dry processing, congolensis and conilon showed the lowest scores in terms of fragrance/aroma, flavour, aftertaste, salt–acid, bitter–sweet, and body. Above 625 m, coffees from dry, honey, and wet processes increased scores in their sensory attributes, but there was no difference at such high altitudes when comparing post-harvest samples. Dry-processed coffee samples had total scores over 80 points at high altitudes. Conilon was perceived to have the best sensory attributes at high altitudes using honey processing. In general, the wet-processed congolensis and conilon samples had a tastier profile than dry-processed ones.

APA, Harvard, Vancouver, ISO, and other styles

33

Kim, Kwandong D., Seungyeon Lee, Jae-Jin Kim, Sang-Hyun Lee, DaeGyun Lee, Jae-Bum Lee, Jin-Young Choi, and Minjoong J. Kim. "Effect of Wet Deposition on Secondary Inorganic Aerosols Using an Urban-Scale Air Quality Model." Atmosphere 12, no. 2 (January 28, 2021): 168. http://dx.doi.org/10.3390/atmos12020168.

Full text

Abstract:

We investigated the effects of wet deposition on secondary inorganic aerosols (SIAs) in urban areas by coupling the wet deposition module with the three-dimensional computational fluid dynamics atmospheric chemistry model (CFD-Chem). We developed a wet deposition model for the microscale model by improving on the global modeling initiative scheme. We evaluated the model by comparing it to the observed washout ratio from the total wet deposition. The simulated washout ratio calculated using the wet scavenging coefficient (WSC) based on the theoretical calculation is six times lower than that observed, suggesting that the wet deposition amount of SIAs from below-cloud scavenging might be underestimated. When we applied the WSC based on field measurements, the washout ratio was much improved; however, it was slightly overestimated compared to the observed rate. Therefore, we estimated the optimal WSC for SIAs in the urban area using a linear regression approach. We conducted a model using the wet deposition of SIAs in a megacity to understand the effects of wet deposition on the SIA concentration using estimated optimal WSCs. The simulated results indicate that washout processes decrease the surface aerosol concentration, showing that reductions in the average surface concentrations from washout processes were from 7.1% to 11.2%. The simulation results suggest that washout processes can reduce the particulate matter concentration in urban areas, indicating that washout processes should be considered in the microscale model, although the modeling domain can only simulate washout processes.

APA, Harvard, Vancouver, ISO, and other styles

34

Saikh, Mahammed Athar Alli, and Prithwiraj Mohapatra. "Specialised Coating Processes Finding Pharmaceutical Applicability." Journal of Drug Delivery and Therapeutics 11, no. 6 (November 15, 2021): 209–24. http://dx.doi.org/10.22270/jddt.v11i6.5133.

Full text

Abstract:

The manuscript aims at furnishing comprehensive information pertaining specialised coating technology/ processes. Solid dosage forms and solid particulates (SDFSP) are the major contributing group in the solid pharmaceuticals (SoPs). SDFSP exhibit peculiar physico-chemical properties and interaction behaviour which create problems/ issues during their handling, processing, storage, and use. Modifying and/or engineering surface attributes of SDFSP are advocated as powerful tool to modify their interaction behaviour and realise their worthy applications and functionalities. In this regard coating their surfaces with coating material (CM) is novel approach. Said approach involves wet and dry process for realising deposition of CM onto the surface of SDFSP substrates. Both the processes modify and/or alter innate properties of SDFSP substrates either physically or chemically. Basing on involved wet or dry process the coating method is either dry coating method (DCM) or wet coating method (WCM). Accordingly nowadays there available number of specialised devices, that bases on diverse technologies. Amongst them some involves state-of-art process/ technology like Supercell coating technology (SCT), Chemical vapour deposition (CVD), Atomic/molecular layer deposition (AMLD), Electrostatic deposition, Thermo-mechanical process, Resonant acoustic technology, Fluidised-bed process, Supercritical fluid (SCF) technology, and others. These foundational for commercially availability of specialised equipments like Magnetically Assisted Impaction Coater (MAIC), Resodyn acoustic mixer, Hybridizer®, Theta-composer®. Mechanofusion®, and others. Working and working principle, applicability, benefits, pros and limitations of specialised coating processes and technologies are herein discussed and presented. Contained information hoped to be beneficent for pharmaceutical professionals and technocrats and professionals of allied field. Keywords: Coating, composite product, modification, specialised, surface.

APA, Harvard, Vancouver, ISO, and other styles

35

Korbutowicz, R., and A. Zakrzewski. "Preliminary comparison of three processes of AlN oxidation: dry, wet and mixed ones." Materials Science-Poland 34, no. 1 (March 1, 2016): 157–63. http://dx.doi.org/10.1515/msp-2016-0010.

Full text

Abstract:

AbstractThree methods of AlN layers oxidation: dry, wet and mixed (wet with oxygen) were compared. Some physical parameters of oxidized thin films of aluminum nitride (AlN) layers grown on silicon Si(1 1 1) were investigated by means Energy-Dispersive X-ray Spectroscopy (EDS) and Spectroscopic Ellipsometry (SE). Three series of the thermal oxidations processes were carried out at 1012 °C in pure nitrogen as carrying gas and various gas ambients: (a) dry oxidation with oxygen, (b) wet oxidation with water steam and (c) mixed atmosphere with various process times. All the research methods have shown that along with the rising of the oxidation time, AlN layer across the aluminum oxide nitride transforms to aluminum oxide. The mixed oxidation was a faster method than the dry or wet ones.

APA, Harvard, Vancouver, ISO, and other styles

36

Vera Valero, C., Y. Bühler, and P. Bartelt. "Point release wet snow avalanches." Natural Hazards and Earth System Sciences Discussions 3, no. 4 (April 30, 2015): 2883–912. http://dx.doi.org/10.5194/nhessd-3-2883-2015.

Full text

Abstract:

Abstract. Wet snow avalanches can initiate from large fracture slabs or small point releases. Point release wet snow avalanches can reach dangerous proportions when they (1) initiate on steep and long avalanche paths and (2) entrain warm moist snow. In this paper we investigate the dynamics of point release wet snow avalanches by applying a numerical model to simulate documented case studies on high altitude slopes in the Chilean Andes (33° S). The model predicts avalanche flow temperature as well as meltwater production, given the thermal initial conditions of the release mass and snowcover entrainment. As the release mass is small, avalanche velocity and runout are primarily controlled by snowcover temperature and moisture content. We demonstrate how the interaction between terrain and entrainment processes influence the production of meltwater and therefore lubrication processes leading to longer runout. This information is useful to avalanche forecasters. An understanding of wet snow avalanche dynamics is important to study how climate change scenarios will influence land usage in mountain regions in the near future.

APA, Harvard, Vancouver, ISO, and other styles

37

Lee, F. H., C. H. Lee, and G. R. Dasari. "Centrifuge modelling of wet deep mixing processes in soft clays." Géotechnique 56, no. 10 (December 2006): 677–91. http://dx.doi.org/10.1680/geot.2006.56.10.677.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Al-Dahoudi, Naji, and Michel A. Aegerter. "Transparent and Antiglare Conducting Coatings Deposited by Wet Chemical Processes." Key Engineering Materials 230-232 (October 2002): 555–58. http://dx.doi.org/10.4028/www.scientific.net/kem.230-232.555.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Wu, Shu Ya, Xiao Qiang Liu, and Xiang Ming Chen. "Low Temperature Synthesis of ZnNb2O6Fine Powders by Wet-Chemical Processes." Ferroelectrics 388, no. 1 (September 28, 2009): 114–19. http://dx.doi.org/10.1080/00150190902965869.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Lai, Yong G. "SIMULATION OF HEAT-TRANSFER CHARACTERISTICS OF WET CLUTCH ENGAGEMENT PROCESSES." Numerical Heat Transfer, Part A: Applications 33, no. 6 (May 1998): 583–97. http://dx.doi.org/10.1080/10407789808913956.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Frances, Christine. "On modelling of submicronic wet milling processes in bead mills." Powder Technology 143-144 (June 2004): 253–63. http://dx.doi.org/10.1016/j.powtec.2004.04.018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Zou, Xianshao, Chuanshuai Li, Xiaojun Su, Yuchen Liu, Daniel Finkelstein-Shapiro, Wei Zhang, and Arkady Yartsev. "Carrier Recombination Processes in GaAs Wafers Passivated by Wet Nitridation." ACS Applied Materials & Interfaces 12, no. 25 (May 29, 2020): 28360–67. http://dx.doi.org/10.1021/acsami.0c04892.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Ledesma, B., S. Román, E. Sabio, and A. Álvarez-Murillo. "Improvement of spent activated carbon regeneration by wet oxidation processes." Journal of Supercritical Fluids 104 (September 2015): 94–103. http://dx.doi.org/10.1016/j.supflu.2015.05.007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Watano, Satoru. "Direct control of wet granulation processes by image processing system." Powder Technology 117, no. 1-2 (June 2001): 163–72. http://dx.doi.org/10.1016/s0032-5910(01)00322-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Hung, Chang-Mao, Jie-Chung Lou, and Chia-Hua Lin. "Removal of ammonia solutions used in catalytic wet oxidation processes." Chemosphere 52, no. 6 (August 2003): 989–95. http://dx.doi.org/10.1016/s0045-6535(03)00303-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Pathare, Pankaj B., and Edmond P. Byrne. "Application of Wet Granulation Processes for Granola Breakfast Cereal Production." Food Engineering Reviews 3, no. 3-4 (October 16, 2011): 189–201. http://dx.doi.org/10.1007/s12393-011-9043-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Mui, David S. L., Eric Howard Lenz, Christine Cyterski, Kartik Venkataraman, and Mark Kawaguchi. "Wafer Surface Charging Model for Single-Wafer Wet-Spin Processes." IEEE Transactions on Semiconductor Manufacturing 24, no. 4 (November 2011): 552–58. http://dx.doi.org/10.1109/tsm.2011.2162346.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

KAWAI, Jun. "New Developments in Chemical Wet Processes. X-Ray Traveling Waves." Hyomen Kagaku 22, no. 6 (2001): 397–403. http://dx.doi.org/10.1380/jsssj.22.397.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Muukkonen, Esa, Teija H?kkinen, Tarja Riihisaari, Simo Er?nen, Ismo Luusua, Arto Kiviranta, and Pekka Savolahti. "Characterization of Wet Chemistry Resist and Resist Residues Removal Processes." Physica Scripta T79, no. 1 (1999): 255. http://dx.doi.org/10.1238/physica.topical.079a00255.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Riella, H. G., M. Durazzo, M. Hirata, and R. A. Nogueira. "UO2-Gd2O3 solid solution formation from wet and dry processes." Journal of Nuclear Materials 178, no. 2-3 (February 1991): 204–11. http://dx.doi.org/10.1016/0022-3115(91)90387-m.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Wet processes'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles