Academic literature on the topic 'Welding and surfacing'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Welding and surfacing.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Welding and surfacing"
Wu, Dong Ting, Yong Zou, Guan Lin Zhao, and Chuan Wei Shi. "Wear-Resistant Surfacing Layer Preparated by High Efficiency Twin-Wire Indirect Arc Welding." Materials Science Forum 985 (April 2020): 229–39. http://dx.doi.org/10.4028/www.scientific.net/msf.985.229.
Full textLiao, Xue Bing, Ren Bin Zhou, An Qing Ming, and Zhen Zhong Quan. "Research on the Performance and Process of Fe/Cr-V – WC Surfacing Welding Layer on Weapons Parts Department." Applied Mechanics and Materials 456 (October 2013): 416–20. http://dx.doi.org/10.4028/www.scientific.net/amm.456.416.
Full textYu, Jin, Yin Zhuo Huang, Bo Wen Wu, and Hou Xian Zhou. "Structure and Performance of Fe-Al Alloy Layer for Twin Wire Surfacing on the Steel Substrate." Advanced Materials Research 658 (January 2013): 158–64. http://dx.doi.org/10.4028/www.scientific.net/amr.658.158.
Full textWang, Xiao Ming, Sheng Zhu, Zhi Hao Zhao, Qi Wei Wang, and Min Zhang. "Effect of Addition of Sc, Zr, Er on Microstructure of Al-Mg Ingot to Generate Welding Wire and Micro-Hardness of Surfacing Layer." Advanced Materials Research 940 (June 2014): 28–31. http://dx.doi.org/10.4028/www.scientific.net/amr.940.28.
Full textMalushin, N. N., Denis V. Valuev, D. P. Il’yaschenko, V. A. Trifonov, and R. Yu Nekrasov. "Technological Improvement of Surfacing of Parts of Hammer Crushers Used in Coke-Chemical Industry." Materials Science Forum 927 (July 2018): 168–75. http://dx.doi.org/10.4028/www.scientific.net/msf.927.168.
Full textMeng, Li Xin, and Xi Zhang. "The Repairing of Camshaft Based on Surfacing Welding and Brush Plating." Applied Mechanics and Materials 127 (October 2011): 292–94. http://dx.doi.org/10.4028/www.scientific.net/amm.127.292.
Full textWang, Hong Mei, and Chang Jun Liu. "Research on the Microstructure and Performance of Co-Based Alloy Surfacing Layer." Advanced Materials Research 652-654 (January 2013): 1886–91. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.1886.
Full textZhang, Qing, Qing Zhang, Wei Shen, and Jun Tan. "Microstructure and Properties of High-Energy Pulsed Cold-Welded Surfacing Layers on 18Cr2Ni4WA Steel." Advanced Materials Research 557-559 (July 2012): 1353–57. http://dx.doi.org/10.4028/www.scientific.net/amr.557-559.1353.
Full textWang, Jin, Min Wei, Jimiao He, Yuqi Wang, and Changrong Ren. "Optimization of Repair Process Parameters for Open-Arc Surfacing Welding of Grinding Rolls Based on the Response Surface Method." Processes 10, no. 2 (February 8, 2022): 321. http://dx.doi.org/10.3390/pr10020321.
Full textDolinenko, V. V., E. V. Shapovalov, V. A. Kolyada, and T. G. Skuba. "Synthesis of Fuzzy Logic Mathematical Model for Adaptive Control of the Mig/Mag Surfacing." Èlektronnoe modelirovanie 43, no. 5 (October 4, 2021): 43–54. http://dx.doi.org/10.15407/emodel.43.05.043.
Full textDissertations / Theses on the topic "Welding and surfacing"
Nagel, Falk. "Investigating the potential of magnetic are oscillated GMWA - welding for hard surfacing applications." Master's thesis, Pontificia Universidad Católica del Perú, 2012. http://tesis.pucp.edu.pe/repositorio/handle/123456789/6235.
Full textDas Metallschutzgasschweißen mit Fülldrahtelektrode ist ein in der Industrie verbreitetes Verfahren zur Herstellung von Hartpanzerungen. Charakteristisch ist die gezielte Beeinflussung des Schweißprozesses und der chemischen Zusammensetzung des Schweißguts durch die Auswahl der Füllstoffe. Des Weiteren können dem Fülldraht Stoffe hinzugegeben werden, wodurch das Schweißen ohne Schutzgas durchgeführt werden kann. Nachteilig ist jedoch der hohe Aufmischungsgrad bei diesem Verfahren. Eine Möglichkeit, diesem Effekt entgegenzuwirken, besteht darin, den Lichtbogen durch das Anlegen eines Magnetfelds in eine oszillierende Bewegung zu versetzen. Der Einfluss eines oszillierenden transversalen Magnetfeldes auf die Nahtausbildung beim MSG-Schweißen mit Fülldraht wurde untersucht. Es zeigt sich dabei, dass der Einbrand verbreitert und die Einbrandtiefe durch die gezielte Auslenkung verringert werden konnte. Der Einfluss des magnetischen Pendelns ist beim Kurzschlusslichtbogen kleiner als beim Impulslichtbogen. Bei hohen Frequenzen und hoher Flussdichte wurde außerdem eine Verringerung der Prozessstabilität und eine daraus resultierende Verschlechterung der Schweißnahtausbildung festgestellt. Außerdem führte ein starker Einfluss des Magnetfelds zu einer erschwerten Tropfenablösung beim Impluls- und Sprühlichtbogen.
Tesis
Марченко, Станіслав Вікторович, Станислав Викторович Марченко, Stanislav Viktorovych Marchenko, Т. С. Липова, and В. В. Дудченко. "Новітні зварювальні технології для наплавлення." Thesis, Видавництво СумДУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/7031.
Full textШкіндер, Олексій Миколайович. "Створення порошкових дротів з покращеними властивостями для дугового наплавлення." Master's thesis, КПІ ім. Ігоря Сікорського, 2019. https://ela.kpi.ua/handle/123456789/31447.
Full textNowadays the industry is developing rapidly. Therefore, powder coils are manufactured, which use a wide variety of types of equipment in their work. The systems used in the current production make it possible to manufacture high quality powder wire with guaranteed power properties, which requires exacting of technical documentation. Thanks to a new, higher technological process, it is theoretically possible to increase the productivity, speed and economy of production.
Špičková, Petra. "Protikorozní ochrana povrchu u rotorů parních turbín." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229973.
Full textЛозовий, С. В. "Проєкт легкового автомобіля з дослідженням технологічного процесу відновлення шарніра рівних кутових швидкостей, відновлення розподільчого валу /комплексний проект/." Thesis, Чернігів, 2021. http://ir.stu.cn.ua/123456789/25318.
Full textВ моїй роботі магістра, було проведено порівняння та характеристика схожих за конструкцію автомобілів, вибрано авто-прототип ЗАЗ 1103 (Славута), виконано розрахунок потужності двигуна, вантажопідйомність автомобіля, передаточні числа КПП на 5 передачах та задня. Визначено параметри двигуна автомобіля, теплові характеристики, навантаження на КШМ. Розраховані параметри руху рівномірного та нерівномірного, паливна економічність. Розрахована гальмівна система, гальмівний привід, гальмівний шлях, зроблено модернізація елементів гальмування. Після виконано процес дослідження технологій відновлення шарніра рівних кутових швидкостей за з дефектами, у відповідності до завдання. Для виконання розрахунків та графічної частини використовувались такі спеціальні програми як: “Mathcad”, “Компас 3D”, “Paint”.
In my master's thesis, a comparison and characterization of similar cars was made, a car prototype ZAZ 1103 (Slavuta) was selected, engine power was calculated, the car's load capacity, gear ratios in 5 gears plus rear. The parameters of the car engine, thermal characteristics, load on KShM are defined. Calculated parameters of uniform and non-uniform motion, fuel economy. The brake system, brake drive, brake path are calculated, modernization of braking elements is made. After the process of research of technologies of restoration of the hinge of equal angular velocities on with defects, according to the task is executed. Special programs such as “Mathcad”, “Compass 3D”, “Paint” were used to perform calculations and graphics.
Двойнос, С. О. "Проєкт вантажного автомобіля /комплексний проєкт/ з розрахунком коробки перемикання передач та розробкою технологічного роцесу відновлення вилки карданного вала." Thesis, Чернігів, 2021. http://ir.stu.cn.ua/123456789/23191.
Full textПід час виконання магістерської випускної роботи, визначили параметри автомобіля його масові показники, провели розрахунок двигуна автомобіля, розрахували навантаження на КШМ, розрахували показники динамічності автомобіля, його гальмівні властивості й паливну економічність. У спеціальній частині магістерської роботи було розглянуто види коробок перемикання, виконали розрахунок коробки перемикання передач. У продовженні спеціальної частини виконали відновлення вилки кардану, яке включає в себе, аналіз та характеристику деталі, вибір способів та методів відновлення, вбір обладнання для відновлення, розрахунок припускі, вибір режимів обробки з подальшим розрахунком норм часу. В написаному висновку підсумували всі результати та пророблену роботу.
During the master's thesis, the parameters of the car were determined by its mass indicators, the car engine was calculated, the load on the CSM was calculated, the dynamics of the car, its braking properties and fuel economy were calculated. In the special part of the master's thesis the types of gearboxes were considered, the calculation of the gearbox was performed. In continuation of the special part, the cardan fork was restored, which includes analysis and characteristics of the part, selection of methods and methods of restoration, selection of equipment for restoration, calculation of allowances, selection of trim modes with subsequent calculation of time norms. The written conclusion summarized all the results and the work done.
Каменецький, Д. А. "Проєкт вантажного автомобіля з дослідженням технологічного процесу відновлення впускного клапана та відновлення вилки карданного вала/комплексний проєкт/." Thesis, Чернігів, 2021. http://ir.stu.cn.ua/123456789/25315.
Full textПри написанні кваліфікаційної роботи, розрахували масові показники й параметри вантажного автомобільного засобу, провели розрахунок двигуна та його теплових характеристик, розрахували передаточні числа коробки перемикання передач, визначили динаміку та навантаження на КШМ автомобіля, дізналися показники динамічності засобу. Дізнався про гальмівний шлях на максимальній швидкості та витрату полива на 100 км.. У спеціальній частині моєї кваліфікаційної роботи було розглянуто види керувань, й виконане модернізування русльової системи авто. Далі виконав відновлення вилки кардану, провів аналіз деталі, вибрав способ й методи для подальшого ремонту (відновлення), підібрав обладнання обладнання, розрахував припуски, вибрав режими обробки вилки кардану ГАЗ 2310 з подальшим розрахунком норм часу на кожну операцію з відновлення.
When writing the dissertation, calculated the mass parameters and parameters of the truck, calculated the engine and its thermal characteristics, calculated the gear ratios, determined the dynamics and load on the vehicle's HF, learned the dynamics of the vehicle. Learned about the braking distance at maximum speed and fuel consumption per 100 km .. In the special part of my qualification work the types of controls were considered, and the modernization of the car's steering system was performed. Then he restored the propeller fork, analyzed the part, chose the method and methods for further repair (restoration), selected the equipment, calculated the allowances, selected the modes of processing the propeller fork GAZ 2310 with subsequent calculation of time for each recovery operation.
Deuis, Robert Leslie. "Aqueous corrosion and tribological properties of metal matrix composite coatings produced by plasma transferred arc surfacing." 1997. http://arrow.unisa.edu.au:8081/1959.8/80086.
Full textBooks on the topic "Welding and surfacing"
Ryabov. Surface Phenomena in Welding and Surfacing (Welding & Surfacing Reviews). Taylor & Francis, 1998.
Find full textSimonov, V. A., V. Petushkov, V. G. Petushkov, V. S. Sedykh, and Yu I. Fadeenko. Explosion Welding Criteria (Welding and Surfacing Reviews). Routledge, 1994.
Find full textRyabeo, V. R. Welding of Composite Materials (Welding and Surfacing Reviews). Routledge, 1995.
Find full textPokhodynya. Welding with Flux-cored Wire (Welding and Surfacing Reviews). Routledge, 1997.
Find full textLobanov, L. Welded Structures (Welding and Surfacing Reviews). Taylor & Francis, 1997.
Find full textSurfacing: Core Research from TWI. Woodhead Publishing, 2000.
Find full textLebedev, A. V. Transistorized Power Sources for Arc Welding (Welding and Surfacing Reviews). Taylor & Francis, 1998.
Find full textLebedev, A. V. Automatic Control of Arc Welding Process (Welding and Surfacing Reviews). Taylor & Francis, 1997.
Find full textRyabov, V. R. Welding of Aluminum Alloys to Steels (Welding and Surfacing Reviews). Taylor & Francis, 1998.
Find full textWelding: The fundamentals of welding, cutting, brazing, soldering and surfacing metals. Moline, Illinois: John Deere Publishing, 2000.
Find full textBook chapters on the topic "Welding and surfacing"
Boronenkov, Vladislav, Michael Zinigrad, Leopold Leontiev, Edward Pastukhov, Mikhail Shalimov, and Sergey Shanchurov. "Modeling and Simulation of Welding, Surfacing and Coating Processes." In Phase Interaction in the Metal - Oxide Melts - Gas -System, 265–322. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-22377-8_6.
Full textZhang, Yuan Bin, and Yao Wu Shi. "Study on the Carbides and the Interface Bonding in Surfacing Welding Metal." In Key Engineering Materials, 1692–95. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.1692.
Full textBoronenkov, Vladislav, Michael Zinigrad, Leopold Leontiev, Edward Pastukhov, Mikhail Shalimov, and Sergey Shanchurov. "Predicting the Structure, Phase Composition and Properties of the Metal During Welding and Surfacing." In Phase Interaction in the Metal - Oxide Melts - Gas -System, 323–55. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-22377-8_7.
Full textFrolov, Aleksey V. "The Experience of the Portal Machine Control System Modernizing for Automatic Arc Welding and Surfacing in a Shielded Gas." In Current Problems and Ways of Industry Development: Equipment and Technologies, 622–31. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69421-0_66.
Full textGregory, E. N., and A. A. Armstrong. "Surfacing." In Welding Symbols on Drawings, 39. Elsevier, 2005. http://dx.doi.org/10.1016/b978-1-85573-589-7.50014-x.
Full text"Friction Surfacing." In Welding, Brazing and Soldering, 321–23. ASM International, 1993. http://dx.doi.org/10.31399/asm.hb.v06.a0001383.
Full text"Friction Surfacing[1]." In Welding Fundamentals and Processes, 678–81. ASM International, 2011. http://dx.doi.org/10.31399/asm.hb.v06a.a0005560.
Full text"Flux-cored wire for surfacing and wear resistance." In Advanced Welding Processes, 260–61. Elsevier, 2006. http://dx.doi.org/10.1016/b978-1-84569-130-1.50028-8.
Full textMeigh, Harry J. "Welding and Fabrication (including metallic surfacing)." In Cast and Wrought Aluminium Bronzes, 126–55. CRC Press, 2018. http://dx.doi.org/10.1201/9781315138848-7.
Full textKretzschmar, E. "PROTECTION AGAINST WEAR BY SURFACING WITH WELDING PASTES." In Advances in Thermal Spraying, 661–67. Elsevier, 1986. http://dx.doi.org/10.1016/b978-0-08-031878-3.50072-1.
Full textConference papers on the topic "Welding and surfacing"
Seidi, Ebrahim, and Scott F. Miller. "Friction Surfacing Using Consumable Tools: A Review." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2963.
Full textRelue, William, Ebrahim Seidi, Lloyd H. Hihara, and Scott F. Miller. "Corrosion Performance of Different Aluminum Alloy Deposits Fabricated by Lateral Friction Surfacing." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-70717.
Full textSitte, G., and S. Keitel. "Rollennaht-Auftragschweißen – eine Alternative zum thermischen Spritzen hochbeanspruchter Oberflächen (Resistance Roller Seam Deposition Welding – An Alternative for Thermal Spraying of High Strained Surfaces)." In ITSC 1999, edited by E. Lugscheider and P. A. Kammer. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 1999. http://dx.doi.org/10.31399/asm.cp.itsc1999p0414.
Full textLiu, Bowen, Hong Lu, Zidong Wu, Shuo Li, and Qiong Liu. "Detection Scheme of Volume of Repair of Engineering Equipment Based on Line Structured Light." In ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8237.
Full textAhieieva, Marina, and Aleksandr Razmyshlyaev. "ABOUT MIXING A LIQUID METAL OF A WELDING POOL IN ARC SURFACING WITH A TRANSVERSE MAGNETIC FIELD EFFECT." In Problèmes et perspectives d'introduction de la recherche scientifique innovante. Plateforme scientifique européenne, 2019. http://dx.doi.org/10.36074/29.11.2019.v2.05.
Full textLugscheider, E., G. Langer, K. Schlimbach, U. Dilthey, and L. Kabatnik. "Möglichkeiten zur Verbesserung der Verschleißeigenschaften von Aluminium-Legierungen durch Plasma-Pulver-Schweißverfahren (Possibilities for Improving Wear-Properties of Aluminium-Alloys by Plasma Powder Welding Process)." In ITSC 1999, edited by E. Lugscheider and P. A. Kammer. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 1999. http://dx.doi.org/10.31399/asm.cp.itsc1999p0410.
Full text