Relevant bibliographies by topics / Waste treatment

Academic literature on the topic 'Waste treatment'

Author: Grafiati

Published: 4 June 2021

Last updated: 21 February 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Waste treatment.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Waste treatment"

Dani Alsyah, Anang, Adriani Darmawati, and Sumarsono Sumarsono. "Respon pertumbuhan dan produksi tanaman Pakchoy (Brassica chinensis L.) akibat pemberian berbagai pupuk limbah organik." Journal of Agro Complex 2, no. 1 (February 25, 2018): 59. http://dx.doi.org/10.14710/joac.2.1.59-67.

Full text

Abstract:

The purpose of this study was to determine the effect of fertilizer application types such as wasted tea fertilizer, leaf litter fertilizer, and market wasted fertilizer on growth and yield of pakchoy mustard. The experimental design was Mono factorial Complete Randomized Design with 8 treatments and 3 replications. The treatments were without fretilization (A0), Tea Wasted fertilizer (A1), Leaf Litter fertilizer (A2), Market Wasted fertilizer (A3), Tea Wasted fertilizer + leaf litter fertilizer (A4), Tea Wasted fertilizer + Market Wasted fertilizer (A5), leaf litter fertilizer + Market Wasted fertilizer (A6), Urea fertilizer 300 kg/ha (A7). Each treatment was replicated in three times and produced 24 experimental units with experimental plots area of 1 m x 1.5 m. The observed parameters were plant height, number of leaves, leaf area index and fresh canopy production. Data were analyzed by Analysis of Variance and continuedby Duncan Multiple Range Test (DMRT) 5%. The results showed that fertilizer treatment of various types of organic waste fertilizer Tea Wasted fertilizer, Leaf Litter fertilizer, Market Wasted fertilizer, Tea Wasted fertilizer + leaf litter fertilizer, Tea Wasted fertilizer + Market Wasted fertilizer, leaf litter fertilizer + Market Wasted fertilize resulted in plant height, number of leaves, fresh leaf canopy production significantly different from treatment without fertilization and urea fertilization. The best result of fresh canopy production was found in the treatment of market waste fertilizer weighing 2,778.47 g / m², the fertilizer application of market waste fertilizer and the combination treatment of tea and market waste fertilizer yielded the best plant height with 31.16 cm, the combination treatment of waste fertilizer Tea and market produces the best leaves as much as 12.44 leaflets, and fertilizer treatment of tea waste fertilizer, market waste fertilizer, tea waste fertilizer + market waste fertilizer, and leaf litter fertilizer + market waste fertilizer yield value index of leaf area 1.23. Keywords : Organic Fertilizer, Organic Wasted Fertilizer, Pakchoy

APA, Harvard, Vancouver, ISO, and other styles

Ismail, Norasyikin, and Farid Nasir Ani. "Solid Waste Management and Treatment in Malaysia." Applied Mechanics and Materials 699 (November 2014): 969–74. http://dx.doi.org/10.4028/www.scientific.net/amm.699.969.

Full text

Abstract:

A huge amount of solid wastes are generated daily in Malaysia. A staggering amount of municipal solid waste (MSW) is produced by one person daily in both urban and rural areas. Apart from these there would also be wastes that come from sewage sludge, industrial waste, agricultural waste, and clinical waste. Statistics of waste generated in Malaysia from each sector mention is presented in this paper. As the population of the country keep expanding, so does the generation of solid waste. However, we could take advantage of the situation by converting these wastes into syngas; which is known to be potentially capable in replacing natural gas for industrial and consumer’s energy application. In addition, existing treatment and processing of biomass and solid fuels such as coal has been widely used in industrial scales to generate electricity. Treatment of solid waste is one of many ways to manage this massive amount of solid waste generated.

APA, Harvard, Vancouver, ISO, and other styles

Ranalli, A. "Microbiological treatment of oil mill waste waters." Grasas y Aceites 43, no. 1 (February 28, 1992): 16–19. http://dx.doi.org/10.3989/gya.1992.v43.i1.1191.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Glass, David J. "Waste Management: Biological Treatment of Hazardous Wastes." Environment: Science and Policy for Sustainable Development 33, no. 9 (November 1991): 5–45. http://dx.doi.org/10.1080/00139157.1991.9933177.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Nieminen, Matti, Markus Olin, Jaana Laatikainen-Luntama, Stephen M. Wickham, Slimane Doudou, Adam J. Fuller, Jenny Kent, et al. "Thermal treatment for radioactive waste minimisation." EPJ Nuclear Sciences & Technologies 6 (2020): 25. http://dx.doi.org/10.1051/epjn/2019040.

Full text

Abstract:

Safe management of radioactive waste is challenging to waste producers and waste management organisations. Deployment of thermal treatment technologies can provide significant improvements: volume reduction, waste passivation, organics destruction, safety demonstration facilitation, etc. The EC-funded THERAMIN project enables an EU-wide strategic review and assessment of the value of thermal treatment technologies applicable to Low and Intermediate Level waste streams (ion exchange media, soft operational waste, sludges, organic waste, and liquids). THERAMIN compiles an EU-wide database of wastes, which could be treated by thermal technologies and documents available thermal technologies. Applicability and benefits of technologies to the identified waste streams will be evaluated through full-scale demonstration tests by project partners. Safety case implications will also be assessed through the study of the disposability of thermally treated waste products. This paper will communicate the strategic aims of the ongoing project and highlight some key findings and results achieved to date.

APA, Harvard, Vancouver, ISO, and other styles

Dobilaitė, Vaida, Milda Ališauskienė, and Virginija Sacevičienė. "Study of Textile Waste Generation and Treatment in Lithuania." Fibres and Textiles in Eastern Europe 25 (December 31, 2017): 8–13. http://dx.doi.org/10.5604/01.3001.0010.5360.

Full text

Abstract:

The constantly encouraged worldwide production and consumption of textile products is leading to an increase in wastes, which causes environmental problems. This research is aimed at identifying the present state of textile waste generation and treatment in Lithuania and compare the trends obtained with other EU countries. The investigation is based on statistical data of textile waste generation and management from 2009 to 2014 in Lithuania. Municipal textile wastes and those from the leather, fur and textile industries as well as other fields of this kind of waste generation were taken for analysis. On average, 6500 tonnes per year of total textile waste was generated during the period analysed. According to these data, Lithuania is in a middle position in comparison with other EU countries. A significant growth in the collection of municipal wastes is observed. From 2012, pre-consumer textile waste amounts to on average 32 percent of the total textile waste collected. The dominant practice of treatment was disposal in landfills, but an increasing tendency to recycle textile waste was observed. Nevertheless a great deal more effort should be made to promote the prevention of waste production and to achieve the average EU waste management indicators.

APA, Harvard, Vancouver, ISO, and other styles

Holt, Erika, Maria Oksa, Matti Nieminen, Abdesselam Abdelouas, Anthony Banford, Maxime Fournier, Thierry Mennecart, and Ernst Niederleithinger. "Predisposal conditioning, treatment, and performance assessment of radioactive waste streams." EPJ Nuclear Sciences & Technologies 8 (2022): 40. http://dx.doi.org/10.1051/epjn/2022036.

Full text

Abstract:

Before the final disposal of radioactive wastes, various processes can be implemented to optimise the waste form. This can include different chemical and physical treatments, such as thermal treatment for waste reduction, waste conditioning for homogenisation and waste immobilisation for stabilisation prior to packaging and interim storage. Ensuring the durability and safety of the waste matrices and packages through performance and condition assessment is important for waste owners, waste management organisations, regulators and wider stakeholder communities. Technical achievements and lessons learned from the THERAMIN and PREDIS projects focused on low- and intermediate-level waste handling is shared here. The recently completed project on Thermal Treatment for Radioactive Waste Minimization and Hazard Reduction (THERAMIN) made advances in demonstrating the feasibility of different thermal treatment techniques to reduce volume and immobilise different streams of radioactive waste (LILW) prior to disposal. The Pre-Disposal Management of Radioactive Waste (PREDIS) project addresses innovations in the treatment of metallic materials, liquid organic waste and solid organic waste, which can result from nuclear power plant operation, decommissioning and other industrial processes. The project also addresses digitalisation solutions for improved safety and efficiency in handling and assessing cemented-waste packages in extended interim surface storage.

APA, Harvard, Vancouver, ISO, and other styles

Kumar Das, Chandan. "Bio-Detoxification Treatment of Waste Water Containing Cadmium." International Journal of Engineering and Technology 4, no. 1 (2012): 72–75. http://dx.doi.org/10.7763/ijet.2012.v4.321.

Full text

APA, Harvard, Vancouver, ISO, and other styles

S.Mahima, S. Mahima. "Environmentally Sound Electronic Waste Treatment Technologies - An Analysis." Global Journal For Research Analysis 3, no. 5 (June 15, 2012): 21–24. http://dx.doi.org/10.15373/22778160/may2014/9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Liu, Jianquan, and Wentai Dai. "Overview of nuclear waste treatment and management." E3S Web of Conferences 118 (2019): 04037. http://dx.doi.org/10.1051/e3sconf/201911804037.

Full text

Abstract:

Nuclear energy is an efficient energy source. Nuclear fuel has the advantages of high energy density and convenient transportation and storage. After decades of tortuous development, nuclear energy has been well utilized in many ways, especially in the field of nuclear power generation. However, as the number of nuclear power plants continues to increase, the problem of nuclear waste disposal is becoming more and more serious. Nuclear waste disposal is a complex process. For nuclear waste treatment, people initially only temporarily deposit these nuclear wastes or dump them directly. However, as people’s awareness of nuclear waste increases, and the huge potential threat of nuclear waste is known, it is necessary to analyze the current characteristics of nuclear waste and its pollution status in order to find a better nuclear waste treatment and management method.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Waste treatment"

Marklund, Erik. "Treatment oriented waste characterization." Licentiate thesis, Luleå tekniska universitet, Geovetenskap och miljöteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-71570.

Full text

Abstract:

New types of materials and products are developed every day, and subsequently, new types of wastes. At the same time, new regulations are put forth to protect human health and the ecosystems from the negative impacts of wastes. Often, the waste management industry is responsible to deal with these problems, and hence, good knowledge about wastes and their treatment is crucial. Waste is normally characterized in order to determine a treatment; however, this usually implies a known treatment method. This thesis aims to provide a structured approach about how to describe different treatments, and to provide guidance on how to characterize wastes in a solution oriented manner. A distinction is made between two types of treatments: those based on separation processes and those based on transformation processes, as well as combinations of the two. Separation processes are common in mechanical treatment such as sieving or air-classification. Transformation processes are common in such treatments as shredding, electroporation, radiation treatment, and stabilization. Most treatments consist of both a transformation and a separation process, such as incineration, in which the organic carbon is oxidized (transformed) into CO2,that then is separated from the remaining solids. Other examples of combined processes are composting and anaerobic digestion. A framework is presented that enables a quantitative description of different waste treatments such as anaerobic digestion and incineration in the same context. All transformation processes take place in an environment that can be described by environmental factors such as temperature, pH, redox, radiation etc. By relating different treatments or observations to each other in an n-dimension matrix, it is possible to not only locate the currently known treatments, but also to locate unexplored areas, i.e. combinations of environmental factors that could be used to treat wastes in new ways. The addition of the n-dimensional framework to the general characterization model, together with the “top down” strategy for characterization provide valuable insights useful for dealing with new types of wastes in an efficient manner.

APA, Harvard, Vancouver, ISO, and other styles

Jafaripour, Amir. "Utilisation of waste gas sludge for waste water treatment." Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/4784/.

Full text

Abstract:

This hypothesis driven research investigated the removal of Cu, Fe, Zn and Mn from synthetic metal solutions and real Acid Mine Drainage (AMD) from Wheal Jane mine in West Cornwall UK, employing waste gas sludge (BOS sludge) which is an end waste reside generated from steel production. Batch experiments showed the efficiency and adsorption rates increased with reduction in BOS sludge particle size, lower in initial metal concentration, increase in BOS sludge dosage, an increase in initial pH and increase in agitation speed. Fitting of the Langmuir isotherm model to experimental data gave a good fit with correlation coefficients R\(^2\)≥0.99 and the selectivity series of BOS sludge was: Cu\(^2\)\(^+\)>Fe\(^3\)\(^+\)>Zn\(^2\)\(^+\)>Mn\(^2\)\(^+\). For single and multiadsorbate systems, a Pseudo second order model was the most appropriate theory to satisfactorily describe experimental data and the rate limiting step for this process was chemisorption. Adsorption was spontaneous and high pH promoted adsorption possibly by precipitation and/or ion exchange processes which had taken place between the exchangeable cations present in BOS and solutions. Results from the treatment of real and synthetic AMD solutions revealed that BOS sludge worked well and hence BOS sludge as a novel low cost material could be used as a sustainable sorbent in AMD treatment technologies.

APA, Harvard, Vancouver, ISO, and other styles

Ahtesham, Babar. "Treatment of nickel plating waste." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0003/MQ45893.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Abou-Jamous, Jamal Khalil. "Radioactive waste treatment using zeolites." Thesis, University of Salford, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.376846.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Sun, Tianhua. "Modelling an SBR waste treatment system." Thesis, University of Ottawa (Canada), 1996. http://hdl.handle.net/10393/10330.

Full text

Abstract:

The sequencing batch reactor (SBR), developed from batch reactor technology, has made significant progress in the past two decades with increasing use in wastewater treatment. However, there are still some important aspects of the system that need improvement. Modelling SBR system, developing lab methods for estimation of the model parameters, re-defining SBR design parameters and comparing SBR and continuous flow stirred tank reactor (CFSTR) systems were the four objectives of this thesis. Previous SBR models cannot predict an entire SBR operation cycle because they have some obvious deficiencies. No consideration of soluble microbial products (SMP) by the models is one of the deficiencies. These deficiencies were carefully reviewed and discussed before beginning the modelling work. A new mathematical model based on the standard Lawrence and McCarty model and IAWPRC model No. 1 has been developed for the SBR activated sludge system. In contrast with previous SBR models, the most important developments of the new model are involving expressions for SMP formed from substrate metabolism and released from activated sludge decay and classifying different basic chemical oxygen demand (COD) categories based on their biodegradabilities. In the new SBR model, total COD is divided into two parts: soluble and insoluble. The soluble part is further subdivided into easy-to-biodegrade substrate (EBS), difficult-to-biodegrade substrate (DBS) and biologically inert organic materials (IOM). The classification of COD makes it possible to describe the degradation process of organic substances more precisely. Quantitative batch test methods for the classification of the substrate have been devised to aid in characterizing and developing the coefficient values of the new SBR model. The batch test techniques were employed for measuring the three different (EBS, DBS and IOM) soluble COD fractions in the influent as well as the formation or release of these three types of substances from metabolism and sludge decay. The kinetic constants of the new model can also be estimated by the techniques. It was found that EBS degradation followed Monod kinetics and DBS degradation followed first-order kinetics. It was also found that the soluble COD released from substrate metabolism is closely related to the type of substrate degraded while the soluble COD released from activated sludge decay is not. (Abstract shortened by UMI.)

APA, Harvard, Vancouver, ISO, and other styles

Li, Yuen-chi. "Sustainable waste treatment in Hong Kong /." View the Table of Contents & Abstract, 2006. http://sunzi.lib.hku.hk/hkuto/record/B37120426.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Ahmed, Yousif Hummaida. "Toxic waste treatment by slag cements." Thesis, Imperial College London, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.336560.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Li, Yuen-chi, and 李宛芝. "Sustainable waste treatment in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B45013512.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Kier, D. "Ion-exchange for radioactive waste treatment." Thesis, University of Salford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.376870.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Carpenter, William K. "Design of medical waste treatment systems employing bioremediation." Thesis, Virginia Tech, 1992. http://hdl.handle.net/10919/42615.

Full text

Abstract:

The design and development of a system for disinfecting medical waste at the site of origin is presented. Investigation of the current commercial systems that accomplish this task shows that they all expose the waste to physical conditions that are harmful to all forms of life. Further, most are very expensive to install and to operate. A recently developed biochemical process promises to effectively inactivate harmful pathogenic organisms economically and without the danger of extreme heat or poisonous chemicals. The biochemical process is not yet fully developed. Nonetheless, the development of a marketable system to take advantage of this technology has been initiated. The motivation for developing this technology and the particular system that will employ it is presented. A general overview of the system and components is presented. Previous and suggested future testing strategies are explained. Component interactions and process control are described.
Master of Science

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Waste treatment"

Maczulak, Anne E. Waste treatment: Reducing global waste. New York: Facts on File, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Ekama, George. Municipal waste treatment. Cape Town: University of Cape Town, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Great Britain. Contaminated Land and Liabilities Division. Waste recycling, treatment and disposal sites hazardous waste treatment plants. Ruislip: DOE, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

J, Vamos Richard, ed. Hazardous and industrial waste treatment. Englewood Cliffs, N.J: Prentice Hall, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Geoffrey, Hamer, and Moo-Young Murray, eds. Waste treatment and utilization. Oxford: Pergamon, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Williams, Paul T. Waste Treatment and Disposal. New York: John Wiley & Sons, Ltd., 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Waste treatment and disposal. Chichester: Wiley, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Rao, Bhamidimarri, International Association on Water Pollution Research and Control., Massey University, and New Zealand. Dept. of Health., eds. Alternative waste treatment systems. London: Elsevier Applied Science, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Hester, R. E., and R. M. Harrison, eds. Waste Treatment and Disposal. Cambridge: Royal Society of Chemistry, 2007. http://dx.doi.org/10.1039/9781847552334.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Municipal waste waters treatment. Amsterdam: Elsevier, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Waste treatment"

Ward, Owen P. "Waste Treatment." In Bioprocessing, 170–77. Boston, MA: Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-3914-8_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Boardman, Gregory D. "Waste Treatment." In The Seafood Industry, 327–47. Oxford, UK: Wiley-Blackwell, 2012. http://dx.doi.org/10.1002/9781118229491.ch25.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Burke and, John M., and William A. Gaines. "Waste Treatment." In Metalworking Fluids, Third Edition, 375–98. Third edition. | Boca Raton : Taylor & Francis, CRC Press, 2017.: CRC Press, 2017. http://dx.doi.org/10.4324/9781351228213-15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Bilitewski, Bernd, Georg Härdtle, and Klaus Marek. "Waste Treatment." In Waste Management, 127–257. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-662-03382-1_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Kranert, Martin, and Detlef Clauss. "Waste treatment." In Technology Guide, 398–401. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-88546-7_74.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Chambon, M., and A. Navarro. "Sludge Treatment." In Chemical Waste, 277–87. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-69625-1_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Salameh, Elias, Musa Shteiwi, and Marwan Al Raggad. "Waste Water Treatment." In Water Resources of Jordan, 87–110. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-77748-1_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Narasimha Swamy, A. V. "Bio Waste Treatment." In Horizons in Bioprocess Engineering, 303–18. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-29069-6_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Al Arni, Saleh S., and Mahmoud M. Elwaheidi. "Waste Treatment Processes." In Concise Handbook of Waste Treatment Technologies, 39–53. First edition. | Boca Raton, FL: CRC Press, 2021.: CRC Press, 2020. http://dx.doi.org/10.4324/9781003112266-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Giroletti, E., and L. Lodola. "Medical Waste Treatment." In Technologies for Environmental Cleanup: Toxic and Hazardous Waste Management, 159–76. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-017-3213-0_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Waste treatment"

salahat, Inayat. "WASTE WATER TREATMENT." In المؤتمر العلمي الدولي التاسع - "الاتجاهات المعاصرة في العلوم الاجتماعية، الانسانية، والطبيعية". شبكة المؤتمرات العربية, 2018. http://dx.doi.org/10.24897/acn.64.68.212.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Deckers, Jan, Rik Vanbrabant, Ronald Womack, and Mark Shuey. "Plasma Treatment of Problematic Waste." In ASME 2001 8th International Conference on Radioactive Waste Management and Environmental Remediation. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/icem2001-1234.

Full text

Abstract:

Abstract Worldwide a great deal of the low and medium radioactive waste inventory is mixed with hazardous wastes and different non-combustibles. The path to treating these wastes historically has been to sort combustibles from non-combustibles and process them separately through incineration, supercompaction, cementation or other encapsulating technologies. Special attention has to be taken due to the presence of hazardous constituents. The cost and health physics exposure for sorting these types of mixed wastes and treating the separated streams in specialized infrastructure is not optimal and leaves a great potential for further optimization. After several years of development, a commercially available high temperature treatment system has been developed and installed that treats heterogeneous low-level radioactive waste. High temperature plasma processing and unique torch design and operating features make it feasible to achieve a volume reduced, permanent, high integrity waste form while eliminating the personnel exposure and cost associated with sorting, characterizing and handling. Plasma technology can also be used to recondition previous conditioned waste packages that don’t meet any longer the present acceptance criteria for final disposal. Plasma treatment can result in many cases in a substantial volume reduction, lowering the final disposal costs. This paper covers the unique plasma centrifugal treatment principles and history. It also explains the roles of international partners that blend plasma, off gas treatment and nuclear expertise into one “best developed and available technology” (BDAT) for the treatment of problematic wastes.

APA, Harvard, Vancouver, ISO, and other styles

Matthews, R. J., M. K. Winson, and J. Scullion. "Aerobic biological treatment of landfill leachate." In WASTE MANAGEMENT 2006. Southampton, UK: WIT Press, 2006. http://dx.doi.org/10.2495/wm060461.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Buendía, I. M., F. J. Fernández, J. Villaseñor, and L. Rodríguez. "Squeezing wastes in a wastewater treatment plant." In WASTE MANAGEMENT 2008. Southampton, UK: WIT Press, 2008. http://dx.doi.org/10.2495/wm080111.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Panepinto, D., and G. Genon. "Wastewater sewage sludge: the thermal treatment solution." In WASTE MANAGEMENT 2014. Southampton, UK: WIT Press, 2014. http://dx.doi.org/10.2495/wm140171.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Arahuetes, A. "Wastewater treatment and reuse in Alicante (Spain)." In WASTE MANAGEMENT 2016. Southampton UK: WIT Press, 2016. http://dx.doi.org/10.2495/wm160331.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Kodali, Ravi Kishore. "Smart waste water treatment." In 2017 IEEE Region 10 Symposium (TENSYMP). IEEE, 2017. http://dx.doi.org/10.1109/tenconspring.2017.8070092.

Full text

APA, Harvard, Vancouver, ISO, and other styles

"Waste treatment and utilization." In The 8th International Mineral Processing Symposium. Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742: CRC Press, 2017. http://dx.doi.org/10.4324/9780203747117-120.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Vlyssides, A., E. M. Barampouti, S. Mai, A. Stamatoglou, and D. Skouroumounis. "Fenton oxidation and biological treatment on pharmaceutical wastewater." In WASTE MANAGEMENT 2008. Southampton, UK: WIT Press, 2008. http://dx.doi.org/10.2495/wm080781.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Rada, E. C. "Local environmental impact from MSW aerobic biological treatment." In WASTE MANAGEMENT 2012. Southampton, UK: WIT Press, 2012. http://dx.doi.org/10.2495/wm120021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Waste treatment"

McCabe, Daniel J., William R. Wilmarth, and Charles A. Nash. Waste Treatment Technology Process Development Plan For Hanford Waste Treatment Plant Low Activity Waste Recycle. Office of Scientific and Technical Information (OSTI), August 2013. http://dx.doi.org/10.2172/1091890.

Full text

APA, Harvard, Vancouver, ISO, and other styles

England, J. L., and J. P. Kanzleiter. Hazardous Waste/Mixed Waste Treatment Building throughput study. Office of Scientific and Technical Information (OSTI), December 1991. http://dx.doi.org/10.2172/7170183.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Full text

APA, Harvard, Vancouver, ISO, and other styles

Kidd, S., and J. S. Bowers. Treatment of mixed waste coolant. Office of Scientific and Technical Information (OSTI), February 1995. http://dx.doi.org/10.2172/46594.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Yimbo, P. Decontamination and Waste Treatment Facility. Office of Scientific and Technical Information (OSTI), March 2008. http://dx.doi.org/10.2172/926407.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Pope, Michael T., and Jeffrey Bryan. Polyoxometalates for Radioactive Waste Treatment. Office of Scientific and Technical Information (OSTI), June 1999. http://dx.doi.org/10.2172/827108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Pope, Michael T. POLYOXOMETALATES FOR RADIOACTIVE WASTE TREATMENT. Office of Scientific and Technical Information (OSTI), June 2000. http://dx.doi.org/10.2172/827110.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Bostick, W. D., D. P. Hoffmann, J. M. Chiang, W. H. Hermes, L. V. Jr Gibson, A. A. Richmond, J. Mayberry, and G. Frazier. Surrogate formulations for thermal treatment of low-level mixed waste, Part II: Selected mixed waste treatment project waste streams. Office of Scientific and Technical Information (OSTI), January 1994. http://dx.doi.org/10.2172/10160913.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Gates-Anderson, D., C. Laue, and T. Fitch. Dissolution Treatment of Depleted Uranium Waste. Office of Scientific and Technical Information (OSTI), February 2004. http://dx.doi.org/10.2172/15009777.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Vienna, J. D., E. D. Collins, J. V. Crum, W. L. Ebert, S. M. Frank, T. G. Garn, D. Gombert, et al. Closed Fuel Cycle Waste Treatment Strategy. Office of Scientific and Technical Information (OSTI), February 2015. http://dx.doi.org/10.2172/1178373.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!