Relevant bibliographies by topics / Viscoelastic Properties - Graphene/(poly)vinyl Alcohol(PVA) Nanocomposite

Contents

  1. Journal articles

Academic literature on the topic 'Viscoelastic Properties - Graphene/(poly)vinyl Alcohol(PVA) Nanocomposite'

Author: Grafiati
Published: 7 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Viscoelastic Properties - Graphene/(poly)vinyl Alcohol(PVA) Nanocomposite.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Viscoelastic Properties - Graphene/(poly)vinyl Alcohol(PVA) Nanocomposite"

1

Tomić, Nataša Z., Myriam Ghodhbane, Zineb Matouk, Nujood AlShehhi, and Chiara Busà. "Enhancement of Self-Healing Efficacy of Conductive Nanocomposite Hydrogels by Polysaccharide Modifiers." Polymers 15, no. 3 (January 18, 2023): 516. http://dx.doi.org/10.3390/polym15030516.

Full text
Abstract:
The proper design of a polysaccharide/hydrocolloid modifier significantly affects the conductivity, self-healing, and viscoelastic properties of nanocomposite hydrogels. Due to the presence of different functional groups, these hydrogels can participate in the covalent, hydrogen and dynamic bonding of a system. The improvement of interactions in this system can lead to the development of high-performance nanocomposite hydrogels. In this study, resilient, self-healing and self-adhesive conductive nanocomposite hydrogels were produced by multiple and diverse coordination connections between various polysaccharide-based modifiers (Arabic gum, sodium carboxymethyl cellulose, and xanthan), the poly(vinyl alcohol) (PVA) network and different graphene-based fillers. Graphene nanoplatelets (GNP), activated carbon black (ACB), and reduced graphene oxide (rGO) have distinct functionalized surfaces, which were analyzed by X-ray photoelectron spectroscopy (XPS). Furthermore, the introduction of fillers balanced the hydrogels’ viscoelastic properties and electrical conductivity, providing the hydrogels with resilience, improved electrical conductivity, and extreme stretchability (5000%). The self-healing properties were analyzed using time-dependent measurements in a shear strain mode using an RSO Rheometer. The improvement in electrochemical and conductivity properties was confirmed by electrochemical impedance spectroscopy (EIS). The obtained conductive nanocomposite hydrogels design opens new possibilities for developing high-performance polysaccharide-based hydrogels with wearable electrical sensors and healthcare monitoring applications.
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Min Eui, and Hyoung-Joon Jin. "Nanocomposite Films of Poly(vinyl alcohol)-Grafted Graphene Oxide/Poly(vinyl alcohol) for Gas Barrier Film Applications." Journal of Nanoscience and Nanotechnology 15, no. 10 (October 1, 2015): 8348–52. http://dx.doi.org/10.1166/jnn.2015.11257.

Full text
Abstract:
Poly(vinyl alcohol) (PVA) composites containing graphene oxide (GO) functionalized with PVA were synthesized via the esterification of the carboxylic groups of GO. The presence of PVA-grafted GO (PVA-g-GO) in the PVA matrix induced strong interactions between the chains of the PVA matrix and allowed the PVA-g-GO to be uniformly dispersed throughout the matrix. The grafting of PVA to GO increased the gas barrier properties of the GO/PVA composites because of the increased compatibility between GO and PVA. The PVA-g-GO/PVA composites were used to coat the surface of poly(ethylene terephthalate) films. These coated films exhibited excellent gas barrier properties; the film containing 0.3 wt% of PVA-g-GO had an oxygen transmission rate (OTR) of 0.025 cc/(m2 · day) and an optical transmittance of 83.8%. As a result, PVA-g-GO/PVA composites that exhibited enhanced gas barrier properties were prepared with a solution mixing method.
APA, Harvard, Vancouver, ISO, and other styles
3

Luo, Qiaomei, Yangyang Shan, Xia Zuo, and Jiaqi Liu. "Anisotropic tough poly(vinyl alcohol)/graphene oxide nanocomposite hydrogels for potential biomedical applications." RSC Advances 8, no. 24 (2018): 13284–91. http://dx.doi.org/10.1039/c8ra00340h.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yilmaz Dogan, Hazal, Yasin Altin, and Ayşe Çelik Bedeloğlu. "Fabrication and properties of graphene oxide and reduced graphene oxide reinforced Poly(Vinyl alcohol) nanocomposite films for packaging applications." Polymers and Polymer Composites 30 (January 2022): 096739112211133. http://dx.doi.org/10.1177/09673911221113328.

Full text
Abstract:
Petroleum-based polymers have a wide range of uses in the packaging industry, including films, food packaging, rigid containers, foamed containers, medical products, etc. This study focuses on improving the properties of polyvinyl alcohol (PVA) based material systems, one of the most popular water-soluble biopolymers, to reduce the waste of petroleum-based plastics, which are widely used. Polyvinyl alcohol (PVA) nanocomposite films containing low concentrations (0.05–1%) of graphene oxide (GO) and reduced graphene oxide (rGO) were produced via the solution casting method. When electrical properties of nanocomposite films were evaluated, the addition of 1 wt% GO and rGO resulted in a 36% and 45% decrease in the volumetric resistance of the films as well as a decrease in surface resistance of 24.5% and 34.9%, respectively. The maximum tensile strength of 1% GO and rGO-reinforced PVA nanocomposites was found to be ∼59 MPa and ∼68 MPa with an increase of 20% and 38% compared to neat PVA films, respectively. The average Young’s modulus of 1% GO and rGO-reinforced PVA nanocomposites also increased from 2561 MPa to 3515 MPa and 4219 MPa with an increase of 37% and 65%, respectively. As a result, the electrical conductivity, Young’s modulus, maximum tensile strength, thermal properties, and optical absorption of nanocomposite films increased by adding GO and rGO to PVA. The results show that the produced nanocomposite film may be a promising material for packaging applications.
APA, Harvard, Vancouver, ISO, and other styles
5

Makharza, Sami, Maryam Faroun, Mohammad Bawwab, and Ibrahim Afaneh. "GRAPHENE OXIDE REINFORCED POLY (VINYL ALCOHOL) NANOCOMPOSITE: FABRICATION AND CHARACTERIZATION FOR THERMAL AND MECHANICAL PROPERTIES INVESTIGATIONS." Engineering Structures and Technologies 11, no. 4 (December 31, 2019): 125–29. http://dx.doi.org/10.3846/est.2019.12473.

Full text
Abstract:
We reported the fabrication of poly (vinyl alcohol) incorporated with two different sizes of graphene oxide particles. Scanning electron microscopy (SEM) revealed two sizes of graphene oxide, the first size is as prepared GO_300 nm and the second size is 100nm after hard sonication. The alteration in thermal and mechanical properties of PVA/ GO (5, 10, 15, 20%) nanocomposite compering with PVA are mainly due to the uniform dispersion of GO particles in the polymer matrix and huge interfacial interaction between PVA and GO sheets. Differential scanning calorimetry shows obvious changes in thermal characteristics of PVA after mixing with GO particles. The composite samples exhibit a significant finding at different concentrations and size distribution of GO.
APA, Harvard, Vancouver, ISO, and other styles
6

Frounchi, Masoud, Susan Dadbin, and Sara Haddadi. "Poly (vinyl alcohol)/nano-diamond composite films and hydrogels prepared by gamma ray." Journal of Polymer Engineering 38, no. 9 (October 25, 2018): 857–62. http://dx.doi.org/10.1515/polyeng-2017-0290.

Full text
Abstract:
Abstract Poly (vinyl alcohol) and nano-diamond, PVA/ND, hydrogels were prepared and assessed as prosthetic material suitable for replacement of the nucleus pulposus. The hydrogels were prepared by gamma irradiation at various doses (15 kGy, 25 kGy, 35 kGy, 45 kGy) and at various ND concentrations ranging from 0.25 wt.% to 3 wt.%. Extent of gelation, equilibrium water content, and viscoelastic properties of swelled hydrogels at definite water contents were measured and examined as a function of ND concentration as well as gamma dose. According to viscoelastic measurements, the strength of hydrogels increased considerably over that of pure PVA at a low concentration of ND. By increasing irradiation dose, gel percent and strength of hydrogels increased. Hydrogel water content was in a range of 80 wt.% to 90 wt.% similar to that of natural nucleus pulposus. The G″ values of hydrogels were much smaller than G′ values indicating elastic behavior. Also PVA/ND nanocomposite films were prepared at various ND concentrations by solution casting. The ND particles were uniformly distributed within PVA films. Tensile modulus and strength of the films increased over pure PVA.
APA, Harvard, Vancouver, ISO, and other styles
7

Cho, Beom-Gon, Shalik Ram Joshi, Seongjin Lee, Shin-Kwan Kim, Young-Bin Park, and Gun-Ho Kim. "Enhanced Mechanical and Antibacterial Properties of Nanocomposites Based on Poly(vinyl Alcohol) and Biopolymer-Derived Reduced Graphene Oxide." Polymers 13, no. 4 (February 18, 2021): 615. http://dx.doi.org/10.3390/polym13040615.

Full text
Abstract:
Functionalized graphene–polymer nanocomposites have gained significant attention for their enhanced mechanical, thermal, and antibacterial properties, but the requirement of multi-step processes or hazardous reducing agents to functionalize graphene limits their current applications. Here, we present a single-step synthesis of thermally reduced graphene oxide (TrGO) based on shellac, which is a low-cost biopolymer that can be employed to produce poly(vinyl alcohol) (PVA)/TrGO nanocomposites (PVA–TrGO). The concentration of TrGO varied from 0.1 to 2.0 wt.%, and the critical concentration of homogeneous TrGO dispersion was observed to be 1.5 wt.%, below which strong interfacial molecular interactions between the TrGO and the PVA matrix resulted in improved thermal and mechanical properties. At 1.5 wt.% filler loading, the tensile strength and modulus of the PVA–TrGO nanocomposite were increased by 98.7% and 97.4%, respectively, while the storage modulus was increased by 69%. Furthermore, the nanocomposite was 96% more effective in preventing bacterial colonization relative to the neat PVA matrix. The present findings indicate that TrGO can be considered a promising material for potential applications in biomedical devices.
APA, Harvard, Vancouver, ISO, and other styles
8

Cobos, Mónica, M. Fernández, and M. Fernández. "Graphene Based Poly(Vinyl Alcohol) Nanocomposites Prepared by In Situ Green Reduction of Graphene Oxide by Ascorbic Acid: Influence of Graphene Content and Glycerol Plasticizer on Properties." Nanomaterials 8, no. 12 (December 6, 2018): 1013. http://dx.doi.org/10.3390/nano8121013.

Full text
Abstract:
The enhanced properties of polymer nanocomposites as compared with pure polymers are only achieved in the presence of well-dispersed nanofillers and strong interfacial adhesion. In this study, we report the preparation of nanocomposite films based on poly(vinyl alcohol) (PVA) filled with well dispersed graphene sheets (GS) by in situ reduction of graphene oxide (GO) dispersed in PVA solution using ascorbic acid (L-AA) as environmentally friendly reductant. The combined effect of GS content and glycerol as plasticizer on the structure, thermal, mechanical, water absorption, and water barrier properties of PVA/GS nanocomposite films is studied for the first time. Higher glass transition temperature, lower crystallinity, melting, and crystallization temperature, higher mechanical properties, and remarkable improvement in the thermal stability compared to neat PVA are obtained as a result of strong interfacial interactions between GS and PVA by hydrogen bonding. PVA/GS composite film prepared by ex situ process is more brittle than its in situ prepared counterpart. The presence of GS improves the water barrier and water resistance properties of nanocomposite films by decreasing water vapor permeability and water absorption of PVA. This work demonstrates that the tailoring of PVA/GS nanocomposite properties is enabled by controlling GS and glycerol content. The new developed materials, particularly those containing plasticizer, could be potential carriers for transdermal drug delivery.
APA, Harvard, Vancouver, ISO, and other styles
9

Cobos, Mónica, Iker De-La-Pinta, Guillermo Quindós, María Jesús Fernández, and María Dolores Fernández. "Synthesis, Physical, Mechanical and Antibacterial Properties of Nanocomposites Based on Poly(vinyl alcohol)/Graphene Oxide–Silver Nanoparticles." Polymers 12, no. 3 (March 24, 2020): 723. http://dx.doi.org/10.3390/polym12030723.

Full text
Abstract:
The design of new materials with antimicrobial properties has emerged in response to the need for preventing and controlling the growth of pathogenic microorganisms without the use of antibiotics. In this study, partially reduced graphene oxide decorated with silver nanoparticles (GO–AgNPs) was incorporated as a reinforcing filler with antibacterial properties to poly(vinyl alcohol) (PVA) for preparation of poly(vinyl alcohol)/graphene oxide-silver nanoparticles nanocomposites (PVA/GO–AgNPs). AgNPs, spherical in shape and with an average size of 3.1 nm, were uniformly anchored on the partially reduced GO surface. PVA/GO–AgNPs nanocomposites showed exfoliated structures with improved thermal stability, tensile properties and water resistance compared to neat PVA. The glass transition and crystallization temperatures of the polymer matrix increased with the incorporation of the hybrid. The nanocomposites displayed antibacterial activity against Staphylococcus aureus and Escherichia coli in a filler content- and time-dependent manner. S. aureus showed higher susceptibility to PVA/GO–AgNPs films than E. coli. Inhibitory activity was higher when bacterial cells were in contact with nanocomposite films than when in contact with leachates coming out of the films. GO–AgNPs based PVA nanocomposites could find application as wound dressings for wound healing and infection prevention.
APA, Harvard, Vancouver, ISO, and other styles
10

Sharma, S. K., J. Prakash, and P. K. Pujari. "Effects of the molecular level dispersion of graphene oxide on the free volume characteristics of poly(vinyl alcohol) and its impact on the thermal and mechanical properties of their nanocomposites." Physical Chemistry Chemical Physics 17, no. 43 (2015): 29201–9. http://dx.doi.org/10.1039/c5cp05278e.

Full text
Abstract:
The effects of the molecular dispersion of graphene oxide on (A) the crystallinity of PVA–GO nanocomposite films and (B) nanohole size distribution in the amorphous region of PVA–GO nanocomposite films.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Viscoelastic Properties - Graphene/(poly)vinyl Alcohol(PVA) Nanocomposite' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography