Academic literature on the topic 'Vibration load'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Vibration load.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Vibration load"
Dapeng, Zhu, Qin Liangkai, and Lin Yundian. "Analytical Study on Dynamic Response of Deep Foundation Pit Support Structure under the Action of Subway Train Vibration Load: A Case Study of Deep Foundation Pit of the New Museum Near Metro Line 2 in Chengdu, China." Shock and Vibration 2015 (2015): 1–10. http://dx.doi.org/10.1155/2015/535196.
Full textNiu, Jianye, Jiang Wu, Qiming Liu, Li Chen, and Shijie Guo. "A Dumbbell Shaped Piezoelectric Motor Driven by the First-Order Torsional and the First-Order Flexural Vibrations." Actuators 9, no. 4 (November 30, 2020): 124. http://dx.doi.org/10.3390/act9040124.
Full textGODZHAEV, Z. A., V. V. SHEKHOVTSOV, M. V. LIASHENKO, A. I. ISKALIEV, and P. V. POTAPOV. "TEST STAND FOR VIBRATION ISOLATORS OF VEHICLE CABIN SUSPENSION." Fundamental and Applied Problems of Engineering and Technology, no. 5 (2021): 165–73. http://dx.doi.org/10.33979/2073-7408-2021-349-5-165-173.
Full textFarrokhi Zanganeh, Niusha, Gholamhossein Shahgholi, and Soleiman Agh. "Studying the Effect of Balancer on Engine Vibration of Massey Ferguson 285 Tractor." Acta Technologica Agriculturae 24, no. 1 (January 29, 2021): 14–19. http://dx.doi.org/10.2478/ata-2021-0003.
Full textKaminsky, R. V., I. V. Kovaltsov, E. A. Kostyukov, S. V. Sibiryakov, and A. S. Filippov. "Vibration analysis of diesel turbocharger for agricultural use." Traktory i sel hozmashiny 85, no. 5 (October 15, 2018): 47–55. http://dx.doi.org/10.17816/0321-4443-66414.
Full textShuai, Chang-geng, Bu-yun Li, Jian-guo Ma, and Zhao-hao Yang. "A Novel Low Stiffness Air Spring Vibration-Isolation Mounting System." Shock and Vibration 2022 (February 21, 2022): 1–11. http://dx.doi.org/10.1155/2022/5598689.
Full textHuang, Yu Yang, Laszlo Horvath, and Péter Böröcz. "Measurement and Analysis of Industrial Forklifts Vibration Levels for Unit Load Testing Purposes." Applied Sciences 11, no. 7 (March 24, 2021): 2901. http://dx.doi.org/10.3390/app11072901.
Full textNasirshoaibi, Mehrdad, Nader Mohammadi, and Masih Nasirshoaibi. "Forced Transverse Vibration of a Closed Double Single-Walled Carbon Nanotube System Containing a Fluid with Effect of Compressive Axial Load." Shock and Vibration 2015 (2015): 1–11. http://dx.doi.org/10.1155/2015/435284.
Full textLi, Guang Hui, Zhen Yu Wang, Guo Peng Liao, and Guang Yu Tan. "Experimental Study on Critical Vibration for the Load of Motion Platform of Linear Servo Motor." Key Engineering Materials 522 (August 2012): 613–17. http://dx.doi.org/10.4028/www.scientific.net/kem.522.613.
Full textGunasekaran, Vijay, Jeyaraj Pitchaimani, and Lenin Babu Mailan Chinnapandi. "Free vibration and inherent material damping characteristics of boron-FRP plate: influence of non-uniform uniaxial edge loads." International Journal for Simulation and Multidisciplinary Design Optimization 12 (2021): 18. http://dx.doi.org/10.1051/smdo/2021017.
Full textDissertations / Theses on the topic "Vibration load"
Kluger, Jocelyn Maxine. "Nonlinear beam-based vibration energy harvesters and load cells." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/87958.
Full textCataloged from PDF version of thesis.
Includes bibliographical references (pages 216-218).
This thesis studies a novel nonlinear spring mechanism that is comprised of a cantilever wrapping around a curved surface as it deflects. Static force versus displacement tests and dynamic "initial displacement" tests verified the spring theory for a large range of oscillator parameters. Various human motion energy harvester configurations that use the nonlinear spring were numerically optimized for power, robustness, and adaptivity. Based on the optimization results, both the nonlinear and linear devices studied in this thesis generate more power per volume and per mass when excited at one's hip while walking than current commercial energy harvesters. The two degree-of-freedom (2DOF) nonlinear oscillator is more adaptive to different excitation signals and resistant to power decay when parasitic damping is present than the IDOF and 2DOF linear systems. These significant advantages are caused by the 2DOF nonlinear system harvesting its optimal power at large electromagnetic damping coefficients, whereas the optimal power generation for the linear systems occurs at low electromagnetic damping coefficients. This thesis also examined what electromagnetic damping coefficients can be generated by magnet-and-coil geometries that satisfy the energy harvester constraints. The final chapter of this thesis investigates a load cell that uses the stiffening spring to maintain high resolution over a large range of forces and prevent large forces from damaging the load cell. Future work will include testing a full energy harvester prototype and exploring other applications of the nonlinear spring.
by Jocelyn Maxine Kluger.
S.M.
Ramsey, Michael W. "Vibration : Health and Performance – a Panacea of a Great Big Load." Digital Commons @ East Tennessee State University, 2009. https://dc.etsu.edu/etsu-works/4113.
Full textLeong, Khin C. "The assessment of the buckling load of structural members by vibration measurements." Thesis, University of Manchester, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.488283.
Full textDorbala, Venkata Navaneeta. "Quantification of Cumulative Load on the Knee using a Vibration Emission Method." Thesis, Virginia Tech, 2012. http://hdl.handle.net/10919/35008.
Full textMaster of Science
Boggs, Thomas P. "Determination of axial load and support stiffness of continuous beams by vibration analysis." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-11102009-020304/.
Full textBoiardi, Andrea. "Study of a Procedure for Unit Load Transport Simulation." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2022.
Find full textWeigel, Timothy G. "Modeling the Dynamic Interactions between Wood Pallets and Corrugated Containers during Resonance." Diss., Virginia Tech, 2001. http://hdl.handle.net/10919/28649.
Full textPh. D.
Stander, Cornelius Johannes. "Condition monitoring of gearboxes operating under fluctuating load conditions." Thesis, University of Pretoria, 2005. http://hdl.handle.net/2263/25604.
Full textThesis (PhD (Mechanical Engineering))--University of Pretoria, 2005.
Mechanical and Aeronautical Engineering
unrestricted
Yadur, Balagangadhar Nakul. "Field Load Data Acquisition with regard to Vibration, Shock and Climate including Self-heating of ECUs." Master's thesis, Universitätsbibliothek Chemnitz, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-161558.
Full textYuan, Lisha. "Optimum First Failure Loads of Sandwich Plates/Shells and Vibrations of Incompressible Material Plates." Diss., Virginia Tech, 2021. http://hdl.handle.net/10919/102664.
Full textDoctor of Philosophy
A simple example of a sandwich structure is a chocolate ice cream bar with the chocolate layer replaced by a stiff plate. Another example is the packaging material used to protect electronics during shipping and handling. The intent is to find the composition and the thickness of the "chocolate layer" so that the ice cream bar will not shatter when dropped on the floor. The objective is met by enforcing the chocolate layer with carbon fibers and then finding fiber materials, their alignment, ice cream or core material, and its thickness to resist anticipated loads with a prescribed level of certainty. Thus, a sandwich structure is usually composed of a soft thick core (e.g., foam) bonded to two relatively stiff thin skins (e.g., made of steel, fiber-reinforced composite) called face sheets. They are lightweight, stiff, and effective in absorbing mechanical energy. Consequently, they are often used in aircraft, aerospace, automobile, and marine industries. The load that causes a point in a structure to fail is called its first failure load, and the load that causes it to either crush or crumble is called the ultimate load. Here, for a fixed areal mass density (mass per unit surface area), we maximize the first failure load of a sandwich shell (plate) under static (dynamic) loads by determining its geometric dimensions, materials and fiber angles in the face sheets, and the number (one or two) of cores. It is found that, for a non-uniformly distributed static pressure applied on the central region of a sandwich shell's top surface, an optimal design that has different materials for the top and the bottom face sheets improves the first failure load by nearly 30%-50% from that of the optimally designed structure with identical face sheets. For the structure optimally designed for the first failure blast load, the ultimate failure load with all of its edges clamped (simply supported) is about 15%-30% (0%-17%) higher than its first failure load. This work should help engineers reduce weight of sandwich structures without sacrificing their integrity and save on materials and cost. Rubberlike materials, polymers, and soft tissues are incompressible since their volume remains constant when they are deformed. Plates made of incompressible materials have a wide range of applications in everyday life, e.g., we hear because of vibrations of the ear drum. Thus, accurately predicting their dynamic behavior is important. A first step usually is determining natural frequencies, i.e., the number of cycles of oscillations per second (e.g., a human heart beats at about 1 cycle/sec) completed by the structure in the absence of any externally applied force. Here, we numerically find natural frequencies and mode shapes of rubber-like material rectangular plates with different supporting conditions at the edges. We employ a plate theory that reduces a 3-dimensional (3-D) problem to a 2-D one and the finite element method. The problem is challenging because the incompressibility constraint requires finding the hydrostatic pressure as a part of the problem solution. We show that the methodology developed here provides results that match well with the corresponding either analytical or numerical solutions of the 3-D linear elasticity equations. The methodology is applicable to analyzing the dynamic response of composite structures with layers of incompressible materials embedded in it.
Books on the topic "Vibration load"
Chouw, Nawawi, and Günther Schmid. Wave propagation Moving load – Vibration Reduction. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003211372.
Full textInternational Workshop Wave 2000 (13-15 December 2000 Bochum, Germany). Wave 2000: Wave propagation, moving load, vibration reduction. Rotterdam, Netherlands: A.A. Balkema, 2000.
Find full textFleming, David P. Transient vibration prediction for rotors on ball bearings using load-dependent non-linear bearing stiffness. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2002.
Find full textAlliance, National Steel Bridge. V-load analysis: An approximate procedure, simplified and extended, for determining moments and shears in designing horizontally-curved open-framed highway bridges. Chicago, Ill: National Steel Bridge Alliance, 1996.
Find full textCollins, J. Scott. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Hampton, Va: Langley Research Center, 1990.
Find full textInternational, Workshop Wave 2002 (2002 Okayamaken Japan). Wave propagation, moving load, vibration reduction: Proceedings of the International Workshop WAVE 2002, Okayama, Japan, 18-20 September 2002. Lisse: Balkema, 2003.
Find full textIssa, Mohsen A. Construction loads and vibrations. [Edwardsville, IL]: Illinois Transportation Research Center, Illinois Dept. of Transportation, 1998.
Find full textVibration of solids and structures under moving loads. 3rd ed. London: Thomas Telford, 1999.
Find full textBalendra, T. Vibration of Buildings to Wind and Earthquake Loads. London: Springer London, 1993.
Find full textBalendra, T. Vibration of Buildings to Wind and Earthquake Loads. London: Springer London, 1993. http://dx.doi.org/10.1007/978-1-4471-2055-1.
Full textBook chapters on the topic "Vibration load"
Wijker, Jaap. "Random Vibration Load Factors." In Miles' Equation in Random Vibrations, 45–56. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73114-8_4.
Full textMaurath, Dominic, and Yiannos Manoli. "Load Matching Detector." In CMOS Circuits for Electromagnetic Vibration Transducers, 199–214. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-017-9272-1_7.
Full textWatkins, William H. "Mechanical and Acoustic Load Impedances." In Loudspeaker Physics and Forced Vibration, 45–47. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91634-3_7.
Full textAlipour, Mohamad, Devin K. Harris, and Osman E. Ozbulut. "Vibration Testing for Bridge Load Rating." In Conference Proceedings of the Society for Experimental Mechanics Series, 175–84. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29751-4_18.
Full textMaurath, Dominic, and Yiannos Manoli. "Input Load Adapting Charge Pump Interface." In CMOS Circuits for Electromagnetic Vibration Transducers, 159–97. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-017-9272-1_6.
Full textOtsuki, M., and K. Yoshida. "Nonstationary robust vibration control for moving wire." In Wave propagation Moving load – Vibration Reduction, 129–36. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003211372-17.
Full textHao, H. "Characteristics of dynamic response and damage of RC structures to blast ground motion." In Wave propagation Moving load – Vibration Reduction, 11–23. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003211372-3.
Full textNagakura, K., and Y. Zenda. "Prediction model of wayside noise level of Shinkansen." In Wave propagation Moving load – Vibration Reduction, 237–44. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003211372-31.
Full textSato, Y., S. Okamoto, C. Tamura, M. Hakuno, and S. Morichi. "Analyses on accumulation of propagating ground surface wave under running train." In Wave propagation Moving load – Vibration Reduction, 39–46. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003211372-5.
Full textAbe, K., D. Satou, T. Suzuki, and M. Furuta. "Three-dimensional analysis of subway track vibrations due to running wheels." In Wave propagation Moving load – Vibration Reduction, 149–56. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003211372-20.
Full textConference papers on the topic "Vibration load"
He, W., S. Wang, C. Zhang, X. Wang, and D. Liu. "Wear analysis of mechanical face seal with random vibration load equivalent to sinusoidal vibration load." In CSAA/IET International Conference on Aircraft Utility Systems (AUS 2020). Institution of Engineering and Technology, 2021. http://dx.doi.org/10.1049/icp.2021.0281.
Full textChangshuai, Yu, Luo Haitao, and Guo Siwei. "Vibration Test and Vibration Reduction Design of UAV Load Radar." In CACRE2019: 2019 4th International Conference on Automation, Control and Robotics Engineering. New York, NY, USA: ACM, 2019. http://dx.doi.org/10.1145/3351917.3351980.
Full textPark, Joonhyung, Perry Gu, Joe Juan, Archie Ni, and James Van Loon. "Operational Spindle Load Estimation Methodology for Road NVH Applications." In SAE 2001 Noise & Vibration Conference & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2001. http://dx.doi.org/10.4271/2001-01-1606.
Full textGudkov, Yury I., Vladimir N. Azarov, and Alexander L. Tuv. "Fiber optic sensor for monitoring vibration load." In 2016 IEEE Conference on Quality Management, Transport and Information Security, Information Technologies (IT&MQ&IS). IEEE, 2016. http://dx.doi.org/10.1109/itmqis.2016.7751901.
Full textPierz, Michael P. "Development of a Precision Variable Load Transmission Error Test Device." In SAE 2001 Noise & Vibration Conference & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2001. http://dx.doi.org/10.4271/2001-01-1491.
Full textLiu, J., and D. W. Herrin. "Load Effect on Source Impedance Measurement Accuracy." In SAE 2009 Noise and Vibration Conference and Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2009. http://dx.doi.org/10.4271/2009-01-2041.
Full textZhu, Jason, Tim Roggenkamp, and Dinghong Yan. "Lab-to-Lab Correlation for Tire Noise Load Cases." In SAE 2003 Noise & Vibration Conference and Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2003. http://dx.doi.org/10.4271/2003-01-1533.
Full textLin, Cheng, Dandan Zhang, Qinqing Huang, Ruilin Yang, Jing Zhang, and Jiebin Li. "Influence of Load Current on Vibration Signal of On-Load Tap Changers." In 2018 International Conference on Power System Technology (POWERCON). IEEE, 2018. http://dx.doi.org/10.1109/powercon.2018.8601665.
Full textEdmonds, David E., and James B. Malosh. "Road Load Dynamometer: Combining Dynamometery With Multi-Axis Vibration Testing." In SAE 2003 Noise & Vibration Conference and Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2003. http://dx.doi.org/10.4271/2003-01-1638.
Full textYan, Xin, David Herrin, and Nikhil Ghaisas. "Measurement of the Transmission Loss of Thin Panels Using the Two-Load Impedance Tube Method." In Noise and Vibration Conference & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2021. http://dx.doi.org/10.4271/2021-01-1059.
Full textReports on the topic "Vibration load"
Quinn, Meghan. Geotechnical effects on fiber optic distributed acoustic sensing performance. Engineer Research and Development Center (U.S.), July 2021. http://dx.doi.org/10.21079/11681/41325.
Full textVehicle Surge Reduction Technology during Towing in Parallel HEV Pickup Truck. SAE International, March 2022. http://dx.doi.org/10.4271/2022-01-0613.
Full text