Relevant bibliographies by topics / Vibrace provozní modální analýza

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Vibrace provozní modální analýza'

Author: Grafiati
Published: 28 June 2021
Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Vibrace provozní modální analýza.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Vibrace provozní modální analýza"

1

Sodomka, Tomáš. "Analýza modálního tlumení strojní součásti pomocí metody OMA." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443767.

Full text
Abstract:
In one of the first hours of study at the Institute of Mechanics of Bodies, Mechatronics and Biomechanics, the author of this work received three basic recommendations regarding measurement: 1) Do not measure! 2) If you measure, do not repeat the measurement!! 3) If you repeat the measurement, do not compare the measurements!!! However, this thesis boldly violates all three recommendations. In the introductory theoretical part, it briefly introduces the vibration of multi-degree of freedom damped systems and describes experimental ways of determining the modal damping. It also summarizes the Operational Modal Analysis (OMA) approach, explains the principle of the FDD method, and introduces EFDD (Enhanced Frequency Domain Decomposition) method which allows to determine not only natural frequencies and shapes as FDD does, but also modal damping of the shapes. A script in Matlab environment for processing vibrations using EFDD method is one of the thesis outputs. The script is first tested by computational model, where a model system with known damping is tested and damping is determined by the script. Subsequently, the work moves to the actual measurement of the real system - a bonded bar which is analysed by Experimental Modal Analysis and OMA, while the second variant uses commercial EFDD method (Brüel a Kjr company) and programmed script. In the conclusion of the thesis the damping results are compared to each other. The diploma thesis continues in Ing. M. Pop’s thesis – Modal Analysis Experimental Method Verification. From this work a part of measured data is taken. Specific cases of data use are always listed in the appropriate section of the text.
APA, Harvard, Vancouver, ISO, and other styles
2

Kratochvílová, Silvie. "Analýza typů buzení pro provádění provozní modální analýzy obráběcích strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-367536.

Full text
Abstract:
The aim of this work is to determine the influence of noise on determination of own frequen-cies for machine tool by operational modal analysis. For the assigned machine tool operation-al analysis is performed using Data-Driven and Covariance-Driven method for multiple exci-tation variants. Based on the results are created stabilization diagrams used to determine ma-chine tool own frequencies. The results for each excitation variant are compared to each oth-er and the effect of noise influence on the results is determined.
APA, Harvard, Vancouver, ISO, and other styles
3

Fiala, Zdeněk. "Vibrace při obrábění kovů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229045.

Full text
Abstract:
The diploma work deals with a mathematical description of vibration and its generation when machining. Moreover, some techniques of modal parameters measurement in the theoretical part are included. The practical part is designed and based on the measured natural frequencies of the machine with specific tool and materials. In conclusion, a lobe diagram stability for semiautomatic lathe SPN 12 CNC and selected machining operation is specified by means of apparatus.
APA, Harvard, Vancouver, ISO, and other styles
4

Čepica, Vojtěch. "Posouzení vlivu tuhosti ložiskových štítů a kvality vyvážení na vibrace synchronního generátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254405.

Full text
Abstract:
The main focus of my master thesis is the assessment of effects of the bearing shields stiffness and balance quality on synchronous generator vibration. The incentive of writing the thesis is the problematic situation, which is characterized by synchronous generator vibration. The aim of my thesis is to variate shields stiffness and to find out the dependence of vibration on stiffness during nominal speed. I have used the program ANSYS based on finite element method to solve this problem.
APA, Harvard, Vancouver, ISO, and other styles
5

Pop, Miroslav. "Ověřování věrohodnosti měřicí metody z oblasti modální analýzy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401587.

Full text
Abstract:
This diploma thesis deals with the issue of operational modal analysis, which is one of the newer areas of structural dynamics that makes it possible to estimate modal properties of structures directly during their operation. The aim of this work is to create theoretical basis of operational modal analysis, more specifically of Frequeny Domain Decomposition method. Furthermore, apply this method to a selected structure and verify the achieved results using computational modelling and experimental modal analysis. The technique of dividing the experiment to separate measurements using reference sensor was used. Evaluation of the operational modal analysis was performed using self-created function for the MATLAB software and using the commercial PULSE Operational Modal Analysis software. Obtained results were verified by computational modelling and experimental modal analysis.
APA, Harvard, Vancouver, ISO, and other styles
6

Blecha, Martin. "Laboratorní demonstrátor pro vibrační diagnostiku." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400643.

Full text
Abstract:
This thesis deals with a vibration diagnostics of objects, structures and machines. The theoretical part is divided into three chapters according to type of the measurement. The first part called Modal Analysis discusses the basis of vibration, methods of measurement, relevant technical equipment and principle of experimental modal analysis. The second and third chapters of the thesis are focused on the diagnosis of defects. Each chapter mentioned above describes diagnosed defects, used methods and procedure for the diagnosis. Another part of the thesis summarizes practical issues and results gained in the laboratory experiments. It begins with discovering parameters of the measured object using technical diagnostics – experimental modal analysis. In the next step the hardware concept design was created, including custom measuring application programmed in LabVIEW. One part of the design is the laboratory model which includes a structure for free mounting and a possibility of excitation by an electrodynamic exciter. The application is also modified to enable measurements with shaker excitation. Finally, applications cooperating with professional software ModalVIEW and BK Connect were developed in order to simplify the operation and increase the comfort.
APA, Harvard, Vancouver, ISO, and other styles
7

Nádvorník, Vít. "Dynamické vlastnosti obrobku při soustružení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241875.

Full text
Abstract:
The contens of master thesis is theoretical analysis of vibrations during turning and possibillity to eliminate them, measure dynamic compliance and modal paramteters. The goal of experimental part is to determine the effect of material and type of clamping for three shafts at natural frequency, mode shape and dynamic compliance. Using these results we can optimized cutting parameters and to better overcome vibration during machining.
APA, Harvard, Vancouver, ISO, and other styles
8

Bouchner, Michal. "Určení NVH parametrů rovinné desky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378142.

Full text
Abstract:
The aim of this thesis is examination and verification of numeric model for solving acoustics and vibration problems. Specifically, we are speaking about cast iron plate machined from gearbox. Main objectives of this work is set of experimental and numerical analysis at this simplified part with follow-up numerical model, where same analyses examining not only structure, but especially acoustic space around were performed. Due to this we were able to compare data between experimental and numerical analyses and to be able to prove or disprove functionality and limitation of numerical model.
APA, Harvard, Vancouver, ISO, and other styles
9

Řehová, Jana. "Analýza dynamického chování štíhlé mostní konstrukce a návrh zařízení na omezení vibrací." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409744.

Full text
Abstract:
This master thesis deals with the dynamic analysis of a footbridge. Computational model of the footbridge was created using ANSYS software. The model was subjected to dynamic wind load in longitudal and lateral direction. Furthermore pedestrian load in lateral direction was analyzed. Afterwards, due to unsatisfactory response to the pedestrian laod, a tuned mass damper was introduced to reduce the vibration. This lead to decrease in the vibration to a satisfactory levels, as is shown in the analyses of the model.
APA, Harvard, Vancouver, ISO, and other styles
10

Kůst, Martin. "Konstrukční návrh moderního těla reproduktoru s využitím nových technologií." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-432589.

Full text
Abstract:
This diploma thesis deals with the analysis and design optimization of a speaker cabinet (enclosure) produced by the additive technology of 3D sand printing. The introductory part is devoted to the theory, both in the field of noise, vibration and the method of their calculations, as well as the theory of speakers and their systems. Numerical and experimental modal analysis is performed, which were compared to determine the mechanical properties of the new material, including material damping. This is followed by experimental and numerical harmonic analysis, with output in the form of a numerical model describing the behaviour of the structure during its excitation. The data are compared with a modal analysis of the internal acoustic space and the critical shapes and their frequencies are determined. At the end of the work, construction modifications are proposed to increase the rigidity of enclosures, the influence of which is evaluated on the created numerical models.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography